1 /*
2 * Copyright (C) 2011 The Android Open Source Project
3 *
4 * Licensed under the Apache License, Version 2.0 (the "License");
5 * you may not use this file except in compliance with the License.
6 * You may obtain a copy of the License at
7 *
8 * http://www.apache.org/licenses/LICENSE-2.0
9 *
10 * Unless required by applicable law or agreed to in writing, software
11 * distributed under the License is distributed on an "AS IS" BASIS,
12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 * See the License for the specific language governing permissions and
14 * limitations under the License.
15 */
16
17 #include "utf.h"
18
19 #include <android-base/logging.h>
20 #include <android-base/stringprintf.h>
21 #include <android-base/strings.h>
22
23 #include "base/casts.h"
24 #include "utf-inl.h"
25
26 namespace art {
27
28 using android::base::StringAppendF;
29
30 // This is used only from debugger and test code.
CountModifiedUtf8Chars(const char * utf8)31 size_t CountModifiedUtf8Chars(const char* utf8) {
32 return CountModifiedUtf8Chars(utf8, strlen(utf8));
33 }
34
35 /*
36 * This does not validate UTF8 rules (nor did older code). But it gets the right answer
37 * for valid UTF-8 and that's fine because it's used only to size a buffer for later
38 * conversion.
39 *
40 * Modified UTF-8 consists of a series of bytes up to 21 bit Unicode code points as follows:
41 * U+0001 - U+007F 0xxxxxxx
42 * U+0080 - U+07FF 110xxxxx 10xxxxxx
43 * U+0800 - U+FFFF 1110xxxx 10xxxxxx 10xxxxxx
44 * U+10000 - U+1FFFFF 11110xxx 10xxxxxx 10xxxxxx 10xxxxxx
45 *
46 * U+0000 is encoded using the 2nd form to avoid nulls inside strings (this differs from
47 * standard UTF-8).
48 * The four byte encoding converts to two utf16 characters.
49 */
CountModifiedUtf8Chars(const char * utf8,size_t byte_count)50 size_t CountModifiedUtf8Chars(const char* utf8, size_t byte_count) {
51 DCHECK_LE(byte_count, strlen(utf8));
52 size_t len = 0;
53 const char* end = utf8 + byte_count;
54 for (; utf8 < end; ++utf8) {
55 int ic = *utf8;
56 len++;
57 if (LIKELY((ic & 0x80) == 0)) {
58 // One-byte encoding.
59 continue;
60 }
61 // Two- or three-byte encoding.
62 utf8++;
63 if ((ic & 0x20) == 0) {
64 // Two-byte encoding.
65 continue;
66 }
67 utf8++;
68 if ((ic & 0x10) == 0) {
69 // Three-byte encoding.
70 continue;
71 }
72
73 // Four-byte encoding: needs to be converted into a surrogate
74 // pair.
75 utf8++;
76 len++;
77 }
78 return len;
79 }
80
81 // This is used only from debugger and test code.
ConvertModifiedUtf8ToUtf16(uint16_t * utf16_data_out,const char * utf8_data_in)82 void ConvertModifiedUtf8ToUtf16(uint16_t* utf16_data_out, const char* utf8_data_in) {
83 while (*utf8_data_in != '\0') {
84 const uint32_t ch = GetUtf16FromUtf8(&utf8_data_in);
85 const uint16_t leading = GetLeadingUtf16Char(ch);
86 const uint16_t trailing = GetTrailingUtf16Char(ch);
87
88 *utf16_data_out++ = leading;
89 if (trailing != 0) {
90 *utf16_data_out++ = trailing;
91 }
92 }
93 }
94
ConvertModifiedUtf8ToUtf16(uint16_t * utf16_data_out,size_t out_chars,const char * utf8_data_in,size_t in_bytes)95 void ConvertModifiedUtf8ToUtf16(uint16_t* utf16_data_out, size_t out_chars,
96 const char* utf8_data_in, size_t in_bytes) {
97 const char *in_start = utf8_data_in;
98 const char *in_end = utf8_data_in + in_bytes;
99 uint16_t *out_p = utf16_data_out;
100
101 if (LIKELY(out_chars == in_bytes)) {
102 // Common case where all characters are ASCII.
103 for (const char *p = in_start; p < in_end;) {
104 // Safe even if char is signed because ASCII characters always have
105 // the high bit cleared.
106 *out_p++ = dchecked_integral_cast<uint16_t>(*p++);
107 }
108 return;
109 }
110
111 // String contains non-ASCII characters.
112 for (const char *p = in_start; p < in_end;) {
113 const uint32_t ch = GetUtf16FromUtf8(&p);
114 const uint16_t leading = GetLeadingUtf16Char(ch);
115 const uint16_t trailing = GetTrailingUtf16Char(ch);
116
117 *out_p++ = leading;
118 if (trailing != 0) {
119 *out_p++ = trailing;
120 }
121 }
122 }
123
ConvertUtf16ToModifiedUtf8(char * utf8_out,size_t byte_count,const uint16_t * utf16_in,size_t char_count)124 void ConvertUtf16ToModifiedUtf8(char* utf8_out, size_t byte_count,
125 const uint16_t* utf16_in, size_t char_count) {
126 if (LIKELY(byte_count == char_count)) {
127 // Common case where all characters are ASCII.
128 const uint16_t *utf16_end = utf16_in + char_count;
129 for (const uint16_t *p = utf16_in; p < utf16_end;) {
130 *utf8_out++ = dchecked_integral_cast<char>(*p++);
131 }
132 return;
133 }
134
135 // String contains non-ASCII characters.
136 while (char_count--) {
137 const uint16_t ch = *utf16_in++;
138 if (ch > 0 && ch <= 0x7f) {
139 *utf8_out++ = ch;
140 } else {
141 // Char_count == 0 here implies we've encountered an unpaired
142 // surrogate and we have no choice but to encode it as 3-byte UTF
143 // sequence. Note that unpaired surrogates can occur as a part of
144 // "normal" operation.
145 if ((ch >= 0xd800 && ch <= 0xdbff) && (char_count > 0)) {
146 const uint16_t ch2 = *utf16_in;
147
148 // Check if the other half of the pair is within the expected
149 // range. If it isn't, we will have to emit both "halves" as
150 // separate 3 byte sequences.
151 if (ch2 >= 0xdc00 && ch2 <= 0xdfff) {
152 utf16_in++;
153 char_count--;
154 const uint32_t code_point = (ch << 10) + ch2 - 0x035fdc00;
155 *utf8_out++ = (code_point >> 18) | 0xf0;
156 *utf8_out++ = ((code_point >> 12) & 0x3f) | 0x80;
157 *utf8_out++ = ((code_point >> 6) & 0x3f) | 0x80;
158 *utf8_out++ = (code_point & 0x3f) | 0x80;
159 continue;
160 }
161 }
162
163 if (ch > 0x07ff) {
164 // Three byte encoding.
165 *utf8_out++ = (ch >> 12) | 0xe0;
166 *utf8_out++ = ((ch >> 6) & 0x3f) | 0x80;
167 *utf8_out++ = (ch & 0x3f) | 0x80;
168 } else /*(ch > 0x7f || ch == 0)*/ {
169 // Two byte encoding.
170 *utf8_out++ = (ch >> 6) | 0xc0;
171 *utf8_out++ = (ch & 0x3f) | 0x80;
172 }
173 }
174 }
175 }
176
ComputeUtf16HashFromModifiedUtf8(const char * utf8,size_t utf16_length)177 int32_t ComputeUtf16HashFromModifiedUtf8(const char* utf8, size_t utf16_length) {
178 uint32_t hash = 0;
179 while (utf16_length != 0u) {
180 const uint32_t pair = GetUtf16FromUtf8(&utf8);
181 const uint16_t first = GetLeadingUtf16Char(pair);
182 hash = hash * 31 + first;
183 --utf16_length;
184 const uint16_t second = GetTrailingUtf16Char(pair);
185 if (second != 0) {
186 hash = hash * 31 + second;
187 DCHECK_NE(utf16_length, 0u);
188 --utf16_length;
189 }
190 }
191 return static_cast<int32_t>(hash);
192 }
193
ComputeModifiedUtf8Hash(const char * chars)194 uint32_t ComputeModifiedUtf8Hash(const char* chars) {
195 uint32_t hash = 0;
196 while (*chars != '\0') {
197 hash = hash * 31 + static_cast<uint8_t>(*chars);
198 ++chars;
199 }
200 return hash;
201 }
202
CompareModifiedUtf8ToUtf16AsCodePointValues(const char * utf8,const uint16_t * utf16,size_t utf16_length)203 int CompareModifiedUtf8ToUtf16AsCodePointValues(const char* utf8, const uint16_t* utf16,
204 size_t utf16_length) {
205 for (;;) {
206 if (*utf8 == '\0') {
207 return (utf16_length == 0) ? 0 : -1;
208 } else if (utf16_length == 0) {
209 return 1;
210 }
211
212 const uint32_t pair = GetUtf16FromUtf8(&utf8);
213
214 // First compare the leading utf16 char.
215 const uint16_t lhs = GetLeadingUtf16Char(pair);
216 const uint16_t rhs = *utf16++;
217 --utf16_length;
218 if (lhs != rhs) {
219 return lhs > rhs ? 1 : -1;
220 }
221
222 // Then compare the trailing utf16 char. First check if there
223 // are any characters left to consume.
224 const uint16_t lhs2 = GetTrailingUtf16Char(pair);
225 if (lhs2 != 0) {
226 if (utf16_length == 0) {
227 return 1;
228 }
229
230 const uint16_t rhs2 = *utf16++;
231 --utf16_length;
232 if (lhs2 != rhs2) {
233 return lhs2 > rhs2 ? 1 : -1;
234 }
235 }
236 }
237 }
238
CountUtf8Bytes(const uint16_t * chars,size_t char_count)239 size_t CountUtf8Bytes(const uint16_t* chars, size_t char_count) {
240 size_t result = 0;
241 const uint16_t *end = chars + char_count;
242 while (chars < end) {
243 const uint16_t ch = *chars++;
244 if (LIKELY(ch != 0 && ch < 0x80)) {
245 result++;
246 continue;
247 }
248 if (ch < 0x800) {
249 result += 2;
250 continue;
251 }
252 if (ch >= 0xd800 && ch < 0xdc00) {
253 if (chars < end) {
254 const uint16_t ch2 = *chars;
255 // If we find a properly paired surrogate, we emit it as a 4 byte
256 // UTF sequence. If we find an unpaired leading or trailing surrogate,
257 // we emit it as a 3 byte sequence like would have done earlier.
258 if (ch2 >= 0xdc00 && ch2 < 0xe000) {
259 chars++;
260 result += 4;
261 continue;
262 }
263 }
264 }
265 result += 3;
266 }
267 return result;
268 }
269
NeedsEscaping(uint16_t ch)270 static inline constexpr bool NeedsEscaping(uint16_t ch) {
271 return (ch < ' ' || ch > '~');
272 }
273
PrintableChar(uint16_t ch)274 std::string PrintableChar(uint16_t ch) {
275 std::string result;
276 result += '\'';
277 if (NeedsEscaping(ch)) {
278 StringAppendF(&result, "\\u%04x", ch);
279 } else {
280 result += static_cast<std::string::value_type>(ch);
281 }
282 result += '\'';
283 return result;
284 }
285
PrintableString(const char * utf8)286 std::string PrintableString(const char* utf8) {
287 std::string result;
288 result += '"';
289 const char* p = utf8;
290 size_t char_count = CountModifiedUtf8Chars(p);
291 for (size_t i = 0; i < char_count; ++i) {
292 uint32_t ch = GetUtf16FromUtf8(&p);
293 if (ch == '\\') {
294 result += "\\\\";
295 } else if (ch == '\n') {
296 result += "\\n";
297 } else if (ch == '\r') {
298 result += "\\r";
299 } else if (ch == '\t') {
300 result += "\\t";
301 } else {
302 const uint16_t leading = GetLeadingUtf16Char(ch);
303
304 if (NeedsEscaping(leading)) {
305 StringAppendF(&result, "\\u%04x", leading);
306 } else {
307 result += static_cast<std::string::value_type>(leading);
308 }
309
310 const uint32_t trailing = GetTrailingUtf16Char(ch);
311 if (trailing != 0) {
312 // All high surrogates will need escaping.
313 StringAppendF(&result, "\\u%04x", trailing);
314 // Account for the surrogate pair.
315 ++i;
316 DCHECK_LT(i, char_count);
317 }
318 }
319 }
320 result += '"';
321 return result;
322 }
323
324 } // namespace art
325