1 /*
2 * Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
3 *
4 * SPDX-License-Identifier: BSD-3-Clause
5 */
6
7 #include <assert.h>
8
9 #include <platform_def.h>
10
11 #include <arch.h>
12 #include <arch_helpers.h>
13 #include <common/debug.h>
14 #include <common/romlib.h>
15 #include <lib/mmio.h>
16 #include <lib/smccc.h>
17 #include <lib/xlat_tables/xlat_tables_compat.h>
18 #include <services/arm_arch_svc.h>
19 #include <plat/arm/common/plat_arm.h>
20 #include <plat/common/platform.h>
21
22 /* Weak definitions may be overridden in specific ARM standard platform */
23 #pragma weak plat_get_ns_image_entrypoint
24 #pragma weak plat_arm_get_mmap
25
26 /* Conditionally provide a weak definition of plat_get_syscnt_freq2 to avoid
27 * conflicts with the definition in plat/common. */
28 #pragma weak plat_get_syscnt_freq2
29
30 /* Get ARM SOC-ID */
31 #pragma weak plat_arm_get_soc_id
32
33 /*******************************************************************************
34 * Changes the memory attributes for the region of mapped memory where the BL
35 * image's translation tables are located such that the tables will have
36 * read-only permissions.
37 ******************************************************************************/
38 #if PLAT_RO_XLAT_TABLES
arm_xlat_make_tables_readonly(void)39 void arm_xlat_make_tables_readonly(void)
40 {
41 int rc = xlat_make_tables_readonly();
42
43 if (rc != 0) {
44 ERROR("Failed to make translation tables read-only at EL%u.\n",
45 get_current_el());
46 panic();
47 }
48
49 INFO("Translation tables are now read-only at EL%u.\n",
50 get_current_el());
51 }
52 #endif
53
arm_setup_romlib(void)54 void arm_setup_romlib(void)
55 {
56 #if USE_ROMLIB
57 if (!rom_lib_init(ROMLIB_VERSION))
58 panic();
59 #endif
60 }
61
plat_get_ns_image_entrypoint(void)62 uintptr_t plat_get_ns_image_entrypoint(void)
63 {
64 #ifdef PRELOADED_BL33_BASE
65 return PRELOADED_BL33_BASE;
66 #else
67 return PLAT_ARM_NS_IMAGE_BASE;
68 #endif
69 }
70
71 /*******************************************************************************
72 * Gets SPSR for BL32 entry
73 ******************************************************************************/
arm_get_spsr_for_bl32_entry(void)74 uint32_t arm_get_spsr_for_bl32_entry(void)
75 {
76 /*
77 * The Secure Payload Dispatcher service is responsible for
78 * setting the SPSR prior to entry into the BL32 image.
79 */
80 return 0;
81 }
82
83 /*******************************************************************************
84 * Gets SPSR for BL33 entry
85 ******************************************************************************/
86 #ifdef __aarch64__
arm_get_spsr_for_bl33_entry(void)87 uint32_t arm_get_spsr_for_bl33_entry(void)
88 {
89 unsigned int mode;
90 uint32_t spsr;
91
92 /* Figure out what mode we enter the non-secure world in */
93 mode = (el_implemented(2) != EL_IMPL_NONE) ? MODE_EL2 : MODE_EL1;
94
95 /*
96 * TODO: Consider the possibility of specifying the SPSR in
97 * the FIP ToC and allowing the platform to have a say as
98 * well.
99 */
100 spsr = SPSR_64((uint64_t)mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
101 return spsr;
102 }
103 #else
104 /*******************************************************************************
105 * Gets SPSR for BL33 entry
106 ******************************************************************************/
arm_get_spsr_for_bl33_entry(void)107 uint32_t arm_get_spsr_for_bl33_entry(void)
108 {
109 unsigned int hyp_status, mode, spsr;
110
111 hyp_status = GET_VIRT_EXT(read_id_pfr1());
112
113 mode = (hyp_status) ? MODE32_hyp : MODE32_svc;
114
115 /*
116 * TODO: Consider the possibility of specifying the SPSR in
117 * the FIP ToC and allowing the platform to have a say as
118 * well.
119 */
120 spsr = SPSR_MODE32(mode, plat_get_ns_image_entrypoint() & 0x1,
121 SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS);
122 return spsr;
123 }
124 #endif /* __aarch64__ */
125
126 /*******************************************************************************
127 * Configures access to the system counter timer module.
128 ******************************************************************************/
129 #ifdef ARM_SYS_TIMCTL_BASE
arm_configure_sys_timer(void)130 void arm_configure_sys_timer(void)
131 {
132 unsigned int reg_val;
133
134 /* Read the frequency of the system counter */
135 unsigned int freq_val = plat_get_syscnt_freq2();
136
137 #if ARM_CONFIG_CNTACR
138 reg_val = (1U << CNTACR_RPCT_SHIFT) | (1U << CNTACR_RVCT_SHIFT);
139 reg_val |= (1U << CNTACR_RFRQ_SHIFT) | (1U << CNTACR_RVOFF_SHIFT);
140 reg_val |= (1U << CNTACR_RWVT_SHIFT) | (1U << CNTACR_RWPT_SHIFT);
141 mmio_write_32(ARM_SYS_TIMCTL_BASE + CNTACR_BASE(PLAT_ARM_NSTIMER_FRAME_ID), reg_val);
142 #endif /* ARM_CONFIG_CNTACR */
143
144 reg_val = (1U << CNTNSAR_NS_SHIFT(PLAT_ARM_NSTIMER_FRAME_ID));
145 mmio_write_32(ARM_SYS_TIMCTL_BASE + CNTNSAR, reg_val);
146
147 /*
148 * Initialize CNTFRQ register in CNTCTLBase frame. The CNTFRQ
149 * system register initialized during psci_arch_setup() is different
150 * from this and has to be updated independently.
151 */
152 mmio_write_32(ARM_SYS_TIMCTL_BASE + CNTCTLBASE_CNTFRQ, freq_val);
153
154 #if defined(PLAT_juno) || defined(PLAT_n1sdp)
155 /*
156 * Initialize CNTFRQ register in Non-secure CNTBase frame.
157 * This is only required for Juno and N1SDP, because they do not
158 * follow ARM ARM in that the value updated in CNTFRQ is not
159 * reflected in CNTBASEN_CNTFRQ. Hence update the value manually.
160 */
161 mmio_write_32(ARM_SYS_CNT_BASE_NS + CNTBASEN_CNTFRQ, freq_val);
162 #endif
163 }
164 #endif /* ARM_SYS_TIMCTL_BASE */
165
166 /*******************************************************************************
167 * Returns ARM platform specific memory map regions.
168 ******************************************************************************/
plat_arm_get_mmap(void)169 const mmap_region_t *plat_arm_get_mmap(void)
170 {
171 return plat_arm_mmap;
172 }
173
174 #ifdef ARM_SYS_CNTCTL_BASE
175
plat_get_syscnt_freq2(void)176 unsigned int plat_get_syscnt_freq2(void)
177 {
178 unsigned int counter_base_frequency;
179
180 /* Read the frequency from Frequency modes table */
181 counter_base_frequency = mmio_read_32(ARM_SYS_CNTCTL_BASE + CNTFID_OFF);
182
183 /* The first entry of the frequency modes table must not be 0 */
184 if (counter_base_frequency == 0U)
185 panic();
186
187 return counter_base_frequency;
188 }
189
190 #endif /* ARM_SYS_CNTCTL_BASE */
191
192 #if SDEI_SUPPORT
193 /*
194 * Translate SDEI entry point to PA, and perform standard ARM entry point
195 * validation on it.
196 */
plat_sdei_validate_entry_point(uintptr_t ep,unsigned int client_mode)197 int plat_sdei_validate_entry_point(uintptr_t ep, unsigned int client_mode)
198 {
199 uint64_t par, pa;
200 u_register_t scr_el3;
201
202 /* Doing Non-secure address translation requires SCR_EL3.NS set */
203 scr_el3 = read_scr_el3();
204 write_scr_el3(scr_el3 | SCR_NS_BIT);
205 isb();
206
207 assert((client_mode == MODE_EL2) || (client_mode == MODE_EL1));
208 if (client_mode == MODE_EL2) {
209 /*
210 * Translate entry point to Physical Address using the EL2
211 * translation regime.
212 */
213 ats1e2r(ep);
214 } else {
215 /*
216 * Translate entry point to Physical Address using the EL1&0
217 * translation regime, including stage 2.
218 */
219 AT(ats12e1r, ep);
220 }
221 isb();
222 par = read_par_el1();
223
224 /* Restore original SCRL_EL3 */
225 write_scr_el3(scr_el3);
226 isb();
227
228 /* If the translation resulted in fault, return failure */
229 if ((par & PAR_F_MASK) != 0)
230 return -1;
231
232 /* Extract Physical Address from PAR */
233 pa = (par & (PAR_ADDR_MASK << PAR_ADDR_SHIFT));
234
235 /* Perform NS entry point validation on the physical address */
236 return arm_validate_ns_entrypoint(pa);
237 }
238 #endif
239
240