android-12.0.0_r34/s

/*
 * Copyright (C) 2017 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "experimental.h"
#include "slicer/code_ir.h"
#include "slicer/control_flow_graph.h"
#include "slicer/dex_ir.h"
#include "slicer/dex_ir_builder.h"
#include "slicer/instrumentation.h"

#include <string.h>
#include <map>
#include <memory>
#include <vector>

namespace experimental {

// Rewrites every method through raising to code IR -> back to bytecode
// (also stress the CFG creation)
void FullRewrite(std::shared_ptr<ir::DexFile> dex_ir) {
  for (auto& ir_method : dex_ir->encoded_methods) {
    if (ir_method->code != nullptr) {
      lir::CodeIr code_ir(ir_method.get(), dex_ir);
      lir::ControlFlowGraph cfg_compact(&code_ir, false);
      lir::ControlFlowGraph cfg_verbose(&code_ir, true);
      code_ir.Assemble();
    }
  }
}

// For every method body in the .dex image, replace invoke-virtual[/range]
// instances with a invoke-static[/range] to a fictitious Tracer.WrapInvoke(<args...>)
// WrapInvoke() is a static method which takes the same arguments as the
// original method plus an explicit "this" argument, and returns the same
// type as the original method.
void StressWrapInvoke(std::shared_ptr<ir::DexFile> dex_ir) {
  for (auto& ir_method : dex_ir->encoded_methods) {
    if (ir_method->code == nullptr) {
      continue;
    }

    lir::CodeIr code_ir(ir_method.get(), dex_ir);
    ir::Builder builder(dex_ir);

    // search for invoke-virtual[/range] bytecodes
    //
    // NOTE: we may be removing the current bytecode
    //   from the instructions list so we must use a
    //   different iteration style (it++ is done before
    //   handling *it, not after as in a normal iteration)
    //
    auto it = code_ir.instructions.begin();
    while (it != code_ir.instructions.end()) {
      auto instr = *it++;
      auto bytecode = dynamic_cast<lir::Bytecode*>(instr);
      if (bytecode == nullptr) {
        continue;
      }

      dex::Opcode new_call_opcode = dex::OP_NOP;
      switch (bytecode->opcode) {
        case dex::OP_INVOKE_VIRTUAL:
          new_call_opcode = dex::OP_INVOKE_STATIC;
          break;
        case dex::OP_INVOKE_VIRTUAL_RANGE:
          new_call_opcode = dex::OP_INVOKE_STATIC_RANGE;
          break;
        default:
          // skip instruction ...
          continue;
      }
      assert(new_call_opcode != dex::OP_NOP);

      auto orig_method = bytecode->CastOperand<lir::Method>(1)->ir_method;

      // construct the wrapper method declaration
      std::vector<ir::Type*> param_types;
      param_types.push_back(orig_method->parent);
      if (orig_method->prototype->param_types != nullptr) {
        const auto& orig_param_types = orig_method->prototype->param_types->types;
        param_types.insert(param_types.end(), orig_param_types.begin(), orig_param_types.end());
      }

      auto ir_proto = builder.GetProto(orig_method->prototype->return_type,
                                       builder.GetTypeList(param_types));

      auto ir_method_decl = builder.GetMethodDecl(builder.GetAsciiString("WrapInvoke"),
                                                  ir_proto,
                                                  builder.GetType("LTracer;"));

      auto wraper_method = code_ir.Alloc<lir::Method>(ir_method_decl, ir_method_decl->orig_index);

      // new call bytecode
      auto new_call = code_ir.Alloc<lir::Bytecode>();
      new_call->opcode = new_call_opcode;
      new_call->operands.push_back(bytecode->operands[0]);
      new_call->operands.push_back(wraper_method);
      code_ir.instructions.InsertBefore(bytecode, new_call);

      // remove the old call bytecode
      //
      // NOTE: we can mutate the original bytecode directly
      //  since the instructions can't have multiple references
      //  in the code IR, but for testing purposes we'll do it
      //  the hard way here
      //
      code_ir.instructions.Remove(bytecode);
    }

    code_ir.Assemble();
  }
}

// For every method in the .dex image, insert an "entry hook" call
// to a fictitious method: Tracer.OnEntry(<args...>). OnEntry() has the
// same argument types as the instrumented method plus an explicit
// "this" for non-static methods. On entry to the instumented method
// we'll call OnEntry() with the values of the incoming arguments.
//
// NOTE: the entry hook will forward all the incoming arguments
//   so we need to define an Tracer.OnEntry overload for every method
//   signature. This means that for very large .dex images, approaching
//   the 64k method limit, we might not be able to allocate new method declarations.
//   (which is ok, and a good test case, since this is a stress scenario)
//
void StressEntryHook(std::shared_ptr<ir::DexFile> dex_ir) {
  for (auto& ir_method : dex_ir->encoded_methods) {
    if (ir_method->code == nullptr) {
      continue;
    }

    lir::CodeIr code_ir(ir_method.get(), dex_ir);
    ir::Builder builder(dex_ir);

    // 1. construct call target
    std::vector<ir::Type*> param_types;
    if ((ir_method->access_flags & dex::kAccStatic) == 0) {
      param_types.push_back(ir_method->decl->parent);
    }
    if (ir_method->decl->prototype->param_types != nullptr) {
      const auto& orig_param_types = ir_method->decl->prototype->param_types->types;
      param_types.insert(param_types.end(), orig_param_types.begin(), orig_param_types.end());
    }

    auto ir_proto = builder.GetProto(builder.GetType("V"),
                                     builder.GetTypeList(param_types));

    auto ir_method_decl = builder.GetMethodDecl(builder.GetAsciiString("OnEntry"),
                                                ir_proto,
                                                builder.GetType("LTracer;"));

    auto target_method = code_ir.Alloc<lir::Method>(ir_method_decl, ir_method_decl->orig_index);

    // 2. argument registers
    auto regs = ir_method->code->registers;
    auto args_count = ir_method->code->ins_count;
    auto args = code_ir.Alloc<lir::VRegRange>(regs - args_count, args_count);

    // 3. call bytecode
    auto call = code_ir.Alloc<lir::Bytecode>();
    call->opcode = dex::OP_INVOKE_STATIC_RANGE;
    call->operands.push_back(args);
    call->operands.push_back(target_method);

    // 4. insert the hook before the first bytecode
    for (auto instr : code_ir.instructions) {
      auto bytecode = dynamic_cast<lir::Bytecode*>(instr);
      if (bytecode == nullptr) {
        continue;
      }
      code_ir.instructions.InsertBefore(bytecode, call);
      break;
    }

    code_ir.Assemble();
  }
}

// For every method in the .dex image, insert an "exit hook" call
// to a fictitious method: Tracer.OnExit(<return value...>).
// OnExit() is called right before returning from the instrumented
// method (on the non-exceptional path) and it will be passed the return
// value, if any. For non-void return types, the return value from OnExit()
// will also be used as the return value of the instrumented method.
void StressExitHook(std::shared_ptr<ir::DexFile> dex_ir) {
  for (auto& ir_method : dex_ir->encoded_methods) {
    if (ir_method->code == nullptr) {
      continue;
    }

    lir::CodeIr code_ir(ir_method.get(), dex_ir);
    ir::Builder builder(dex_ir);

    // do we have a void-return method?
    bool return_void =
        ::strcmp(ir_method->decl->prototype->return_type->descriptor->c_str(), "V") == 0;

    // 1. construct call target
    std::vector<ir::Type*> param_types;
    if (!return_void) {
      param_types.push_back(ir_method->decl->prototype->return_type);
    }

    auto ir_proto = builder.GetProto(ir_method->decl->prototype->return_type,
                                     builder.GetTypeList(param_types));

    auto ir_method_decl = builder.GetMethodDecl(builder.GetAsciiString("OnExit"),
                                                ir_proto,
                                                builder.GetType("LTracer;"));

    auto target_method = code_ir.Alloc<lir::Method>(ir_method_decl, ir_method_decl->orig_index);

    // 2. find and instrument the return instructions
    for (auto instr : code_ir.instructions) {
      auto bytecode = dynamic_cast<lir::Bytecode*>(instr);
      if (bytecode == nullptr) {
        continue;
      }

      dex::Opcode move_result_opcode = dex::OP_NOP;
      dex::u4 reg = 0;
      int reg_count = 0;

      switch (bytecode->opcode) {
        case dex::OP_RETURN_VOID:
          SLICER_CHECK(return_void);
          break;
        case dex::OP_RETURN:
          SLICER_CHECK(!return_void);
          move_result_opcode = dex::OP_MOVE_RESULT;
          reg = bytecode->CastOperand<lir::VReg>(0)->reg;
          reg_count = 1;
          break;
        case dex::OP_RETURN_OBJECT:
          SLICER_CHECK(!return_void);
          move_result_opcode = dex::OP_MOVE_RESULT_OBJECT;
          reg = bytecode->CastOperand<lir::VReg>(0)->reg;
          reg_count = 1;
          break;
        case dex::OP_RETURN_WIDE:
          SLICER_CHECK(!return_void);
          move_result_opcode = dex::OP_MOVE_RESULT_WIDE;
          reg = bytecode->CastOperand<lir::VRegPair>(0)->base_reg;
          reg_count = 2;
          break;
        default:
          // skip the bytecode...
          continue;
      }

      // the call bytecode
      auto args = code_ir.Alloc<lir::VRegRange>(reg, reg_count);
      auto call = code_ir.Alloc<lir::Bytecode>();
      call->opcode = dex::OP_INVOKE_STATIC_RANGE;
      call->operands.push_back(args);
      call->operands.push_back(target_method);
      code_ir.instructions.InsertBefore(bytecode, call);

      // move result back to the right register
      //
      // NOTE: we're reusing the original return's operand,
      //   which is valid and more efficient than allocating
      //   a new LIR node, but it's also fragile: we need to be
      //   very careful about mutating shared nodes.
      //
      if (move_result_opcode != dex::OP_NOP) {
        auto move_result = code_ir.Alloc<lir::Bytecode>();
        move_result->opcode = move_result_opcode;
        move_result->operands.push_back(bytecode->operands[0]);
        code_ir.instructions.InsertBefore(bytecode, move_result);
      }
    }

    code_ir.Assemble();
  }
}

// Test slicer::MethodInstrumenter
void TestMethodInstrumenter(std::shared_ptr<ir::DexFile> dex_ir) {
  slicer::MethodInstrumenter mi(dex_ir);
  mi.AddTransformation<slicer::EntryHook>(
      ir::MethodId("LTracer;", "onFooEntry"),
      slicer::EntryHook::Tweak::ThisAsObject);
  mi.AddTransformation<slicer::EntryHook>(
      ir::MethodId("LTracer;", "onFooEntry"));
  mi.AddTransformation<slicer::ExitHook>(ir::MethodId("LTracer;", "onFooExit"));
  mi.AddTransformation<slicer::DetourVirtualInvoke>(
      ir::MethodId("LBase;", "foo", "(ILjava/lang/String;)I"),
      ir::MethodId("LTracer;", "wrapFoo"));
  mi.AddTransformation<slicer::DetourInterfaceInvoke>(
      ir::MethodId("LIBase;", "bar", "(Ljava/lang/String;)V"),
      ir::MethodId("LTracer;", "wrapBar"));

  auto method1 = ir::MethodId("LTarget;", "foo", "(ILjava/lang/String;)I");
  SLICER_CHECK(mi.InstrumentMethod(method1));

  auto method2 = ir::MethodId("LTarget;", "foo", "(I[[Ljava/lang/String;)Ljava/lang/Integer;");
  SLICER_CHECK(mi.InstrumentMethod(method2));
}

// Stress scratch register allocation
void StressScratchRegs(std::shared_ptr<ir::DexFile> dex_ir) {
  slicer::MethodInstrumenter mi(dex_ir);

  // queue multiple allocations to stress corner cases (various counts and alignments)
  auto t1 = mi.AddTransformation<slicer::AllocateScratchRegs>(1, false);
  auto t2 = mi.AddTransformation<slicer::AllocateScratchRegs>(1, false);
  auto t3 = mi.AddTransformation<slicer::AllocateScratchRegs>(1);
  auto t4 = mi.AddTransformation<slicer::AllocateScratchRegs>(20);

  // apply the transformations to every single method
  for (auto& ir_method : dex_ir->encoded_methods) {
    if (ir_method->code != nullptr) {
      SLICER_CHECK(mi.InstrumentMethod(ir_method.get()));
      SLICER_CHECK(t1->ScratchRegs().size() == 1);
      SLICER_CHECK(t2->ScratchRegs().size() == 1);
      SLICER_CHECK(t3->ScratchRegs().size() == 1);
      SLICER_CHECK(t4->ScratchRegs().size() == 20);
    }
  }
}

// Sample code coverage instrumentation: on the entry of every
// basic block, inject a call to a tracing method:
//
//   CodeCoverage.TraceBasicBlock(block_id)
//
void CodeCoverage(std::shared_ptr<ir::DexFile> dex_ir) {
  ir::Builder builder(dex_ir);
  slicer::AllocateScratchRegs alloc_regs(1);
  int basic_block_id = 1;

  constexpr const char* kTracerClass = "LCodeCoverage;";

  // create the tracing method declaration
  std::vector<ir::Type*> param_types { builder.GetType("I") };
  auto ir_proto =
      builder.GetProto(builder.GetType("V"),
                       builder.GetTypeList(param_types));
  auto ir_method_decl =
      builder.GetMethodDecl(builder.GetAsciiString("TraceBasicBlock"),
                            ir_proto,
                            builder.GetType(kTracerClass));

  // instrument every method (except for the tracer class methods)
  for (auto& ir_method : dex_ir->encoded_methods) {
    if (ir_method->code == nullptr) {
      continue;
    }

    // don't instrument the methods of the tracer class
    if (std::strcmp(ir_method->decl->parent->descriptor->c_str(), kTracerClass) == 0) {
      continue;
    }

    lir::CodeIr code_ir(ir_method.get(), dex_ir);
    lir::ControlFlowGraph cfg(&code_ir, true);

    // allocate a scratch register
    //
    // NOTE: we're assuming this does not change the CFG!
    //   (this is the case here, but transformations which
    //    alter the basic blocks boundaries or the code flow
    //    would invalidate existing CFGs)
    //
    alloc_regs.Apply(&code_ir);
    dex::u4 scratch_reg = *alloc_regs.ScratchRegs().begin();

    // TODO: handle very "high" registers
    if (scratch_reg > 0xff) {
      printf("WARNING: can't instrument method %s.%s%s\n",
             ir_method->decl->parent->Decl().c_str(),
             ir_method->decl->name->c_str(),
             ir_method->decl->prototype->Signature().c_str());
      continue;
    }

    auto tracing_method = code_ir.Alloc<lir::Method>(ir_method_decl, ir_method_decl->orig_index);

    // instrument each basic block entry point
    for (const auto& block : cfg.basic_blocks) {
      // generate the map of basic blocks
      printf("%8u: mi=%u s=%u e=%u\n",
             static_cast<dex::u4>(basic_block_id),
             ir_method->decl->orig_index,
             block.region.first->offset,
             block.region.last->offset);

      // find first bytecode in the basic block
      lir::Instruction* trace_point = nullptr;
      for (auto instr = block.region.first; instr != nullptr; instr = instr->next) {
        trace_point = dynamic_cast<lir::Bytecode*>(instr);
        if (trace_point != nullptr || instr == block.region.last) {
          break;
        }
      }
      SLICER_CHECK(trace_point != nullptr);

      // special case: don't separate 'move-result-<kind>' from the preceding invoke
      auto opcode = static_cast<lir::Bytecode*>(trace_point)->opcode;
      if (opcode == dex::OP_MOVE_RESULT ||
          opcode == dex::OP_MOVE_RESULT_WIDE ||
          opcode == dex::OP_MOVE_RESULT_OBJECT) {
        trace_point = trace_point->next;
      }

      // arg_reg = block_id
      auto load_block_id = code_ir.Alloc<lir::Bytecode>();
      load_block_id->opcode = dex::OP_CONST;
      load_block_id->operands.push_back(code_ir.Alloc<lir::VReg>(scratch_reg));
      load_block_id->operands.push_back(code_ir.Alloc<lir::Const32>(basic_block_id));
      code_ir.instructions.InsertBefore(trace_point, load_block_id);

      // call the tracing method
      auto trace_call = code_ir.Alloc<lir::Bytecode>();
      trace_call->opcode = dex::OP_INVOKE_STATIC_RANGE;
      trace_call->operands.push_back(code_ir.Alloc<lir::VRegRange>(scratch_reg, 1));
      trace_call->operands.push_back(tracing_method);
      code_ir.instructions.InsertBefore(trace_point, trace_call);

      ++basic_block_id;
    }

    code_ir.Assemble();
  }
}

// Stress the roundtrip: EncodedMethod -> MethodId -> FindMethod -> EncodedMethod
// NOTE: until we start indexing methods this test is slow on debug builds + large .dex images
void StressFindMethod(std::shared_ptr<ir::DexFile> dex_ir) {
  ir::Builder builder(dex_ir);
  int method_count = 0;
  for (auto& ir_method : dex_ir->encoded_methods) {
    auto decl = ir_method->decl;
    auto signature = decl->prototype->Signature();
    auto class_descriptor = decl->parent->descriptor;
    ir::MethodId method_id(class_descriptor->c_str(), decl->name->c_str(), signature.c_str());
    SLICER_CHECK(builder.FindMethod(method_id) == ir_method.get());
    ++method_count;
  }
  printf("Everything looks fine, found %d methods.\n", method_count);
}

static void PrintHistogram(const std::map<int, int> histogram, const char* name) {
  constexpr int kHistogramWidth = 100;
  int max_count = 0;
  for (const auto& kv : histogram) {
    max_count = std::max(max_count, kv.second);
  }
  printf("\nHistogram: %s [max_count=%d]\n\n", name, max_count);
  for (const auto& kv : histogram) {
    printf("%6d [ %3d ] ", kv.second, kv.first);
    int hist_len = static_cast<int>(static_cast<double>(kv.second) / max_count * kHistogramWidth);
    for (int i = 0; i <= hist_len; ++i) {
      printf("*");
    }
    printf("\n");
  }
}

// Builds a histogram of registers count per method
void RegsHistogram(std::shared_ptr<ir::DexFile> dex_ir) {
  std::map<int, int> regs_histogram;
  std::map<int, int> param_histogram;
  std::map<int, int> extra_histogram;
  for (auto& ir_method : dex_ir->encoded_methods) {
    if (ir_method->code != nullptr) {
      const int regs = ir_method->code->registers;
      const int ins =  ir_method->code->ins_count;
      SLICER_CHECK(regs >= ins);
      regs_histogram[regs]++;
      param_histogram[ins]++;
      extra_histogram[regs - ins]++;
    }
  }
  PrintHistogram(regs_histogram, "Method registers");
  PrintHistogram(param_histogram, "Method parameter registers");
  PrintHistogram(regs_histogram, "Method extra registers (total - parameters)");
}

// Test slicer::MethodInstrumenter + Tweak::ArrayParams
void TestArrayParamsEntryHook(std::shared_ptr<ir::DexFile> dex_ir) {
  slicer::MethodInstrumenter mi(dex_ir);
  mi.AddTransformation<slicer::EntryHook>(ir::MethodId("LTracer;", "onFooEntry"),
                                          slicer::EntryHook::Tweak::ArrayParams);

  auto method1 = ir::MethodId("LTarget;", "foo", "(ILjava/lang/String;)I");
  SLICER_CHECK(mi.InstrumentMethod(method1));

  auto method2 = ir::MethodId("LTarget;", "foo", "(I[[Ljava/lang/String;)Ljava/lang/Integer;");
  SLICER_CHECK(mi.InstrumentMethod(method2));
}

// Test slicer::MethodInstrumenter + Tweak::ReturnAsObject
void TestReturnAsObjectExitHook(std::shared_ptr<ir::DexFile> dex_ir) {
  slicer::MethodInstrumenter mi(dex_ir);
  mi.AddTransformation<slicer::ExitHook>(ir::MethodId("LTracer;", "onFooExit"),
                                          slicer::ExitHook::Tweak::ReturnAsObject);

  auto method = ir::MethodId("LTarget;", "foo", "(I[[Ljava/lang/String;)Ljava/lang/Integer;");
  SLICER_CHECK(mi.InstrumentMethod(method));
}

// Test slicer::MethodInstrumenter + Tweak::ReturnAsObject + Tweak::PassMethodSignature
void TestPassMethodSignatureExitHook(std::shared_ptr<ir::DexFile> dex_ir) {
  slicer::MethodInstrumenter mi(dex_ir);
  mi.AddTransformation<slicer::ExitHook>(ir::MethodId("LTracer;", "onFooExit"),
                                          slicer::ExitHook::Tweak::ReturnAsObject |
                                          slicer::ExitHook::Tweak::PassMethodSignature);

  auto method = ir::MethodId("LTarget;", "foo", "(I[[Ljava/lang/String;)Ljava/lang/Integer;");
  SLICER_CHECK(mi.InstrumentMethod(method));
}

void ListExperiments(std::shared_ptr<ir::DexFile> dex_ir);

using Experiment = void (*)(std::shared_ptr<ir::DexFile>);

// the registry of available experiments
std::map<std::string, Experiment> experiments_registry = {
    { "list_experiments", &ListExperiments },
    { "full_rewrite", &FullRewrite },
    { "stress_entry_hook", &StressEntryHook },
    { "stress_exit_hook", &StressExitHook },
    { "stress_wrap_invoke", &StressWrapInvoke },
    { "test_method_instrumenter", &TestMethodInstrumenter },
    { "stress_find_method", &StressFindMethod },
    { "stress_scratch_regs", &StressScratchRegs },
    { "regs_histogram", &RegsHistogram },
    { "code_coverage", &CodeCoverage },
    { "array_param_entry_hook", &TestArrayParamsEntryHook },
    { "return_obj_exit_hook", &TestReturnAsObjectExitHook },
    { "pass_sign_exit_hook", &TestPassMethodSignatureExitHook },
};

// Lists all the registered experiments
void ListExperiments(std::shared_ptr<ir::DexFile> dex_ir) {
  printf("\nAvailable experiments:\n");
  printf("-------------------------\n");
  for (auto& e : experiments_registry) {
    printf("  %s\n", e.first.c_str());
  }
  printf("-------------------------\n\n");
}

// Driver for running experiments
void Run(const char* experiment, std::shared_ptr<ir::DexFile> dex_ir) {
  auto it = experiments_registry.find(experiment);
  if (it == experiments_registry.end()) {
    printf("\nUnknown experiment '%s'\n", experiment);
    ListExperiments(dex_ir);
    exit(1);
  }

  // running the experiment entry point
  (*it->second)(dex_ir);
}

}  // namespace experimental