1 /****************************************************************************** 2 * 3 * Copyright 2014 The Android Open Source Project 4 * Copyright 2003 - 2004 Open Interface North America, Inc. All rights 5 * reserved. 6 * 7 * Licensed under the Apache License, Version 2.0 (the "License"); 8 * you may not use this file except in compliance with the License. 9 * You may obtain a copy of the License at: 10 * 11 * http://www.apache.org/licenses/LICENSE-2.0 12 * 13 * Unless required by applicable law or agreed to in writing, software 14 * distributed under the License is distributed on an "AS IS" BASIS, 15 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 16 * See the License for the specific language governing permissions and 17 * limitations under the License. 18 * 19 ******************************************************************************/ 20 21 /******************************************************************************* 22 $Revision: #1 $ 23 ******************************************************************************/ 24 25 #ifndef _OI_CODEC_SBC_CORE_H 26 #define _OI_CODEC_SBC_CORE_H 27 28 #ifdef __cplusplus 29 extern "C" { 30 #endif 31 32 /** 33 @file 34 Declarations of codec functions, data types, and macros. 35 36 @ingroup codec_lib 37 */ 38 39 /** 40 @addtogroup codec_lib 41 @{ 42 */ 43 44 /* Non-BM3 users of of the codec must include oi_codec_sbc_bm3defs.h prior to 45 * including this file, or else these includes will fail because the BM3 SDK is 46 * not in the include path */ 47 #ifndef _OI_CODEC_SBC_BM3DEFS_H 48 #include "oi_status.h" 49 #include "oi_stddefs.h" 50 #endif 51 52 #include <stdint.h> 53 54 #define SBC_MAX_CHANNELS 2 55 #define SBC_MAX_BANDS 8 56 #define SBC_MAX_BLOCKS 16 57 /* Minimum size of the bit allocation pool used to encode the stream */ 58 #define SBC_MIN_BITPOOL 2 59 /* Maximum size of the bit allocation pool used to encode the stream */ 60 #define SBC_MAX_BITPOOL 250 61 #define SBC_MAX_ONE_CHANNEL_BPS 320000 62 #define SBC_MAX_TWO_CHANNEL_BPS 512000 63 64 #define SBC_WBS_BITRATE 62000 65 #define SBC_WBS_BITPOOL 27 66 #define SBC_WBS_NROF_BLOCKS 16 67 #define SBC_WBS_FRAME_LEN 62 68 #define SBC_WBS_SAMPLES_PER_FRAME 128 69 70 #define SBC_HEADER_LEN 4 71 #define SBC_MAX_FRAME_LEN \ 72 (SBC_HEADER_LEN + \ 73 ((SBC_MAX_BANDS * SBC_MAX_CHANNELS / 2) + \ 74 (SBC_MAX_BANDS + SBC_MAX_BLOCKS * SBC_MAX_BITPOOL + 7) / 8)) 75 #define SBC_MAX_SAMPLES_PER_FRAME (SBC_MAX_BANDS * SBC_MAX_BLOCKS) 76 77 #define SBC_MAX_SCALEFACTOR_BYTES \ 78 ((4 * (SBC_MAX_CHANNELS * SBC_MAX_BANDS) + 7) / 8) 79 80 #define OI_SBC_SYNCWORD 0x9c 81 #define OI_SBC_ENHANCED_SYNCWORD 0x9d 82 83 /**@name Sampling frequencies */ 84 /**@{*/ 85 /**< The sampling frequency is 16 kHz. One possible value for the @a frequency 86 * parameter of OI_CODEC_SBC_EncoderConfigure() */ 87 #define SBC_FREQ_16000 0 88 /**< The sampling frequency is 32 kHz. One possible value for the @a frequency 89 * parameter of OI_CODEC_SBC_EncoderConfigure() */ 90 #define SBC_FREQ_32000 1 91 /**< The sampling frequency is 44.1 kHz. One possible value for the @a frequency 92 * parameter of OI_CODEC_SBC_EncoderConfigure() */ 93 #define SBC_FREQ_44100 2 94 /**< The sampling frequency is 48 kHz. One possible value for the @a frequency 95 * parameter of OI_CODEC_SBC_EncoderConfigure() */ 96 #define SBC_FREQ_48000 3 97 /**@}*/ 98 99 /**@name Channel modes */ 100 /**@{*/ 101 /**< The mode of the encoded channel is mono. One possible value for the @a mode 102 * parameter of OI_CODEC_SBC_EncoderConfigure() */ 103 #define SBC_MONO 0 104 /**< The mode of the encoded channel is dual-channel. One possible value for the 105 * @a mode parameter of OI_CODEC_SBC_EncoderConfigure() */ 106 #define SBC_DUAL_CHANNEL 1 107 /**< The mode of the encoded channel is stereo. One possible value for the @a 108 * mode parameter of OI_CODEC_SBC_EncoderConfigure() */ 109 #define SBC_STEREO 2 110 /**< The mode of the encoded channel is joint stereo. One possible value for the 111 * @a mode parameter of OI_CODEC_SBC_EncoderConfigure() */ 112 #define SBC_JOINT_STEREO 3 113 /**@}*/ 114 115 /**@name Subbands */ 116 /**@{*/ 117 /**< The encoded stream has 4 subbands. One possible value for the @a subbands 118 * parameter of OI_CODEC_SBC_EncoderConfigure()*/ 119 #define SBC_SUBBANDS_4 0 120 /**< The encoded stream has 8 subbands. One possible value for the @a subbands 121 * parameter of OI_CODEC_SBC_EncoderConfigure() */ 122 #define SBC_SUBBANDS_8 1 123 /**@}*/ 124 125 /**@name Block lengths */ 126 /**@{*/ 127 /**< A block size of 4 blocks was used to encode the stream. One possible value 128 * for the @a blocks parameter of OI_CODEC_SBC_EncoderConfigure() */ 129 #define SBC_BLOCKS_4 0 130 /**< A block size of 8 blocks was used to encode the stream is. One possible 131 * value for the @a blocks parameter of OI_CODEC_SBC_EncoderConfigure() */ 132 #define SBC_BLOCKS_8 1 133 /**< A block size of 12 blocks was used to encode the stream. One possible value 134 * for the @a blocks parameter of OI_CODEC_SBC_EncoderConfigure() */ 135 #define SBC_BLOCKS_12 2 136 /**< A block size of 16 blocks was used to encode the stream. One possible value 137 * for the @a blocks parameter of OI_CODEC_SBC_EncoderConfigure() */ 138 #define SBC_BLOCKS_16 3 139 /**@}*/ 140 141 /**@name Bit allocation methods */ 142 /**@{*/ 143 /**< The bit allocation method. One possible value for the @a loudness parameter 144 * of OI_CODEC_SBC_EncoderConfigure() */ 145 #define SBC_LOUDNESS 0 146 /**< The bit allocation method. One possible value for the @a loudness parameter 147 * of OI_CODEC_SBC_EncoderConfigure() */ 148 #define SBC_SNR 1 149 /**@}*/ 150 151 /** 152 @} 153 154 @addtogroup codec_internal 155 @{ 156 */ 157 158 typedef int16_t SBC_BUFFER_T; 159 160 /** Used internally. */ 161 typedef struct { 162 uint16_t frequency; /**< The sampling frequency. Input parameter. */ 163 uint8_t freqIndex; 164 165 uint8_t nrof_blocks; /**< The block size used to encode the stream. Input 166 parameter. */ 167 uint8_t blocks; 168 169 uint8_t nrof_subbands; /**< The number of subbands of the encoded stream. 170 Input parameter. */ 171 uint8_t subbands; 172 173 uint8_t mode; /**< The mode of the encoded channel. Input parameter. */ 174 uint8_t nrof_channels; /**< The number of channels of the encoded stream. */ 175 176 uint8_t alloc; /**< The bit allocation method. Input parameter. */ 177 uint8_t bitpool; /**< Size of the bit allocation pool used to encode the 178 stream. Input parameter. */ 179 uint8_t crc; /**< Parity check byte used for error detection. */ 180 uint8_t join; /**< Whether joint stereo has been used. */ 181 uint8_t enhanced; 182 uint8_t min_bitpool; /**< This value is only used when encoding. 183 SBC_MAX_BITPOOL if variable 184 bitpools are disallowed, otherwise the minimum 185 bitpool size that will 186 be used by the bit allocator. */ 187 188 uint8_t cachedInfo; /**< Information about the previous frame */ 189 } OI_CODEC_SBC_FRAME_INFO; 190 191 /** Used internally. */ 192 typedef struct { 193 const OI_CHAR* codecInfo; 194 OI_CODEC_SBC_FRAME_INFO frameInfo; 195 int8_t scale_factor[SBC_MAX_CHANNELS * SBC_MAX_BANDS]; 196 uint32_t frameCount; 197 int32_t* subdata; 198 199 SBC_BUFFER_T* filterBuffer[SBC_MAX_CHANNELS]; 200 int32_t filterBufferLen; 201 OI_UINT filterBufferOffset; 202 203 union { 204 uint8_t uint8[SBC_MAX_CHANNELS * SBC_MAX_BANDS]; 205 uint32_t uint32[SBC_MAX_CHANNELS * SBC_MAX_BANDS / 4]; 206 } bits; 207 uint8_t maxBitneed; /**< Running maximum bitneed */ 208 OI_BYTE formatByte; 209 uint8_t pcmStride; 210 uint8_t maxChannels; 211 } OI_CODEC_SBC_COMMON_CONTEXT; 212 213 /* 214 * A smaller value reduces RAM usage at the expense of increased CPU usage. 215 * Values in the range 27..50 are recommended. Beyond 50 there is a diminishing 216 * return on reduced CPU usage. 217 */ 218 #define SBC_CODEC_MIN_FILTER_BUFFERS 16 219 #define SBC_CODEC_FAST_FILTER_BUFFERS 27 220 221 /* Expands to the number of uint32_ts needed to ensure enough memory to encode 222 * or decode streams of numChannels channels, using numBuffers buffers. 223 * Example: 224 * uint32_t decoderData[CODEC_DATA_WORDS(SBC_MAX_CHANNELS, 225 * SBC_DECODER_FAST_SYNTHESIS_BUFFERS)]; 226 * */ 227 #define CODEC_DATA_WORDS(numChannels, numBuffers) \ 228 (((sizeof(int32_t) * SBC_MAX_BLOCKS * (numChannels)*SBC_MAX_BANDS) + \ 229 (sizeof(SBC_BUFFER_T) * SBC_MAX_CHANNELS * SBC_MAX_BANDS * (numBuffers)) + \ 230 (sizeof(uint32_t) - 1)) / \ 231 sizeof(uint32_t)) 232 233 /** Opaque parameter to decoding functions; maintains decoder context. */ 234 typedef struct { 235 OI_CODEC_SBC_COMMON_CONTEXT common; 236 /* Boolean, set by OI_CODEC_SBC_DecoderLimit() */ 237 uint8_t limitFrameFormat; 238 uint8_t restrictSubbands; 239 uint8_t enhancedEnabled; 240 uint8_t bufferedBlocks; 241 } OI_CODEC_SBC_DECODER_CONTEXT; 242 243 typedef struct { 244 uint32_t data[CODEC_DATA_WORDS(1, SBC_CODEC_FAST_FILTER_BUFFERS)]; 245 } OI_CODEC_SBC_CODEC_DATA_MONO; 246 247 typedef struct { 248 uint32_t data[CODEC_DATA_WORDS(2, SBC_CODEC_FAST_FILTER_BUFFERS)]; 249 } OI_CODEC_SBC_CODEC_DATA_STEREO; 250 251 /** 252 @} 253 254 @addtogroup codec_lib 255 @{ 256 */ 257 258 /** 259 * This function resets the decoder. The context must be reset when 260 * changing streams, or if the following stream parameters change: 261 * number of subbands, stereo mode, or frequency. 262 * 263 * @param context Pointer to the decoder context structure to be reset. 264 * 265 * @param enhanced If true, enhanced SBC operation is enabled. If enabled, 266 * the codec will recognize the alternative syncword for 267 * decoding an enhanced SBC stream. Enhancements should not 268 * be enabled unless the stream is known to be generated 269 * by an enhanced encoder, or there is a small possibility 270 * for decoding glitches if synchronization were to be lost. 271 */ 272 OI_STATUS OI_CODEC_SBC_DecoderReset(OI_CODEC_SBC_DECODER_CONTEXT* context, 273 uint32_t* decoderData, 274 uint32_t decoderDataBytes, 275 uint8_t maxChannels, uint8_t pcmStride, 276 OI_BOOL enhanced); 277 278 /** 279 * This function restricts the kind of SBC frames that the Decoder will 280 * process. Its use is optional. If used, it must be called after 281 * calling OI_CODEC_SBC_DecoderReset(). After it is called, any calls 282 * to OI_CODEC_SBC_DecodeFrame() with SBC frames that do not conform 283 * to the Subband and Enhanced SBC setting will be rejected with an 284 * OI_STATUS_INVALID_PARAMETERS return. 285 * 286 * @param context Pointer to the decoder context structure to be limited. 287 * 288 * @param enhanced If true, all frames passed to the decoder must be 289 * Enhanced SBC frames. If false, all frames must be 290 * standard SBC frames. 291 * 292 * @param subbands May be set to SBC_SUBBANDS_4 or SBC_SUBBANDS_8. All 293 * frames passed to the decoder must be encoded with 294 * the requested number of subbands. 295 * 296 */ 297 OI_STATUS OI_CODEC_SBC_DecoderLimit(OI_CODEC_SBC_DECODER_CONTEXT* context, 298 OI_BOOL enhanced, uint8_t subbands); 299 300 /** 301 * This function sets the decoder parameters for a raw decode where the decoder 302 * parameters are not available in the sbc data stream. 303 * OI_CODEC_SBC_DecoderReset must be called prior to calling this function. 304 * 305 * @param context Decoder context structure. This must be the context 306 * must be used each time a frame is decoded. 307 * 308 * @param enhanced Set to true to enable Qualcomm proprietary 309 * quality enhancements. 310 * 311 * @param frequency One of SBC_FREQ_16000, SBC_FREQ_32000, SBC_FREQ_44100, 312 * SBC_FREQ_48000 313 * 314 * @param mode One of SBC_MONO, SBC_DUAL_CHANNEL, SBC_STEREO, 315 * SBC_JOINT_STEREO 316 * 317 * @param subbands One of SBC_SUBBANDS_4, SBC_SUBBANDS_8 318 * 319 * @param blocks One of SBC_BLOCKS_4, SBC_BLOCKS_8, SBC_BLOCKS_12, 320 * SBC_BLOCKS_16 321 * 322 * @param alloc One of SBC_LOUDNESS, SBC_SNR 323 * 324 * @param maxBitpool The maximum bitpool size for this context 325 */ 326 OI_STATUS OI_CODEC_SBC_DecoderConfigureRaw( 327 OI_CODEC_SBC_DECODER_CONTEXT* context, OI_BOOL enhanced, uint8_t frequency, 328 uint8_t mode, uint8_t subbands, uint8_t blocks, uint8_t alloc, 329 uint8_t maxBitpool); 330 331 /** 332 * Decode one SBC frame. The frame has no header bytes. The context must have 333 * been previously initialized by calling OI_CODEC_SBC_DecoderConfigureRaw(). 334 * 335 * @param context Pointer to a decoder context structure. The same context 336 * must be used each time when decoding from the same 337 * stream. 338 * 339 * @param bitpool The actual bitpool size for this frame. Must be <= the 340 * maxbitpool specified in the call to 341 * OI_CODEC_SBC_DecoderConfigureRaw(). 342 * 343 * @param frameData Address of a pointer to the SBC data to decode. This 344 * value will be updated to point to the next frame after 345 * successful decoding. 346 * 347 * @param frameBytes Pointer to a uint32_t containing the number of available 348 * bytes of frame data. This value will be updated to 349 * reflect the number of bytes remaining after a decoding 350 * operation. 351 * 352 * @param pcmData Address of an array of int16_t pairs, which will be 353 * populated with the decoded audio data. This address 354 * is not updated. 355 * 356 * @param pcmBytes Pointer to a uint32_t in/out parameter. On input, it 357 * should contain the number of bytes available for pcm 358 * data. On output, it will contain the number of bytes 359 * written. Note that this differs from the semantics of 360 * frameBytes. 361 */ 362 OI_STATUS OI_CODEC_SBC_DecodeRaw(OI_CODEC_SBC_DECODER_CONTEXT* context, 363 uint8_t bitpool, const OI_BYTE** frameData, 364 uint32_t* frameBytes, int16_t* pcmData, 365 uint32_t* pcmBytes); 366 367 /** 368 * Decode one SBC frame. 369 * 370 * @param context Pointer to a decoder context structure. The same context 371 * must be used each time when decoding from the same 372 * stream. 373 * 374 * @param frameData Address of a pointer to the SBC data to decode. This 375 * value will be updated to point to the next frame after 376 * successful decoding. 377 * 378 * @param frameBytes Pointer to a uint32_t containing the number of available 379 * bytes of frame data. This value will be updated to 380 * reflect the number of bytes remaining after a decoding 381 * operation. 382 * 383 * @param pcmData Address of an array of int16_t pairs, which will be 384 * populated with the decoded audio data. This address 385 * is not updated. 386 * 387 * @param pcmBytes Pointer to a uint32_t in/out parameter. On input, it 388 * should contain the number of bytes available for pcm 389 * data. On output, it will contain the number of bytes 390 * written. Note that this differs from the semantics of 391 * frameBytes. 392 */ 393 OI_STATUS OI_CODEC_SBC_DecodeFrame(OI_CODEC_SBC_DECODER_CONTEXT* context, 394 const OI_BYTE** frameData, 395 uint32_t* frameBytes, int16_t* pcmData, 396 uint32_t* pcmBytes); 397 398 /** 399 * Calculate the number of SBC frames but don't decode. CRC's are not checked, 400 * but the Sync word is found prior to count calculation. 401 * 402 * @param frameData Pointer to the SBC data. 403 * 404 * @param frameBytes Number of bytes avaiable in the frameData buffer 405 * 406 */ 407 uint8_t OI_CODEC_SBC_FrameCount(OI_BYTE* frameData, uint32_t frameBytes); 408 409 /** 410 * Analyze an SBC frame but don't do the decode. 411 * 412 * @param context Pointer to a decoder context structure. The same context 413 * must be used each time when decoding from the same 414 * stream. 415 * 416 * @param frameData Address of a pointer to the SBC data to decode. This 417 * value will be updated to point to the next frame after 418 * successful decoding. 419 * 420 * @param frameBytes Pointer to a uint32_t containing the number of available 421 * bytes of frame data. This value will be updated to 422 * reflect the number of bytes remaining after a decoding 423 * operation. 424 * 425 */ 426 OI_STATUS OI_CODEC_SBC_SkipFrame(OI_CODEC_SBC_DECODER_CONTEXT* context, 427 const OI_BYTE** frameData, 428 uint32_t* frameBytes); 429 430 /* Common functions */ 431 432 /** 433 Calculate the frame length. 434 435 @param frame The frame whose length to calculate 436 437 @return the length of an individual encoded frame in 438 bytes 439 */ 440 uint16_t OI_CODEC_SBC_CalculateFramelen(OI_CODEC_SBC_FRAME_INFO* frame); 441 442 /** 443 * Calculate the maximum bitpool size that fits within a given frame length. 444 * 445 * @param frame The frame to calculate the bitpool size for 446 * @param frameLen The frame length to fit the bitpool to 447 * 448 * @return the maximum bitpool that will fit in the specified frame length 449 */ 450 uint16_t OI_CODEC_SBC_CalculateBitpool(OI_CODEC_SBC_FRAME_INFO* frame, 451 uint16_t frameLen); 452 453 /** 454 Calculate the bit rate. 455 456 @param frame The frame whose bit rate to calculate 457 458 @return the approximate bit rate in bits per second, 459 assuming that stream parameters are constant 460 */ 461 uint32_t OI_CODEC_SBC_CalculateBitrate(OI_CODEC_SBC_FRAME_INFO* frame); 462 463 /** 464 Calculate decoded audio data length for one frame. 465 466 @param frame The frame whose audio data length to calculate 467 468 @return length of decoded audio data for a 469 single frame, in bytes 470 */ 471 uint16_t OI_CODEC_SBC_CalculatePcmBytes(OI_CODEC_SBC_COMMON_CONTEXT* common); 472 473 /** 474 * Get the codec version text. 475 * 476 * @return pointer to text string containing codec version text 477 * 478 */ 479 OI_CHAR* OI_CODEC_Version(void); 480 481 /** 482 @} 483 484 @addtogroup codec_internal 485 @{ 486 */ 487 488 extern const OI_CHAR* const OI_CODEC_SBC_FreqText[]; 489 extern const OI_CHAR* const OI_CODEC_SBC_ModeText[]; 490 extern const OI_CHAR* const OI_CODEC_SBC_SubbandsText[]; 491 extern const OI_CHAR* const OI_CODEC_SBC_BlocksText[]; 492 extern const OI_CHAR* const OI_CODEC_SBC_AllocText[]; 493 494 /** 495 @} 496 497 @addtogroup codec_lib 498 @{ 499 */ 500 501 #ifdef OI_DEBUG 502 void OI_CODEC_SBC_DumpConfig(OI_CODEC_SBC_FRAME_INFO* frameInfo); 503 #else 504 #define OI_CODEC_SBC_DumpConfig(f) 505 #endif 506 507 /** 508 @} 509 */ 510 511 #ifdef __cplusplus 512 } 513 #endif 514 515 #endif /* _OI_CODEC_SBC_CORE_H */ 516