• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /****************************************************************************
2  *
3  * ftmoderr.h
4  *
5  *   FreeType module error offsets (specification).
6  *
7  * Copyright (C) 2001-2020 by
8  * David Turner, Robert Wilhelm, and Werner Lemberg.
9  *
10  * This file is part of the FreeType project, and may only be used,
11  * modified, and distributed under the terms of the FreeType project
12  * license, LICENSE.TXT.  By continuing to use, modify, or distribute
13  * this file you indicate that you have read the license and
14  * understand and accept it fully.
15  *
16  */
17 
18 
19   /**************************************************************************
20    *
21    * This file is used to define the FreeType module error codes.
22    *
23    * If the macro `FT_CONFIG_OPTION_USE_MODULE_ERRORS` in `ftoption.h` is
24    * set, the lower byte of an error value identifies the error code as
25    * usual.  In addition, the higher byte identifies the module.  For
26    * example, the error `FT_Err_Invalid_File_Format` has value 0x0003, the
27    * error `TT_Err_Invalid_File_Format` has value 0x1303, the error
28    * `T1_Err_Invalid_File_Format` has value 0x1403, etc.
29    *
30    * Note that `FT_Err_Ok`, `TT_Err_Ok`, etc. are always equal to zero,
31    * including the high byte.
32    *
33    * If `FT_CONFIG_OPTION_USE_MODULE_ERRORS` isn't set, the higher byte of an
34    * error value is set to zero.
35    *
36    * To hide the various `XXX_Err_` prefixes in the source code, FreeType
37    * provides some macros in `fttypes.h`.
38    *
39    *   FT_ERR( err )
40    *
41    *     Add current error module prefix (as defined with the `FT_ERR_PREFIX`
42    *     macro) to `err`.  For example, in the BDF module the line
43    *
44    *     ```
45    *       error = FT_ERR( Invalid_Outline );
46    *     ```
47    *
48    *     expands to
49    *
50    *     ```
51    *       error = BDF_Err_Invalid_Outline;
52    *     ```
53    *
54    *     For simplicity, you can always use `FT_Err_Ok` directly instead of
55    *     `FT_ERR( Ok )`.
56    *
57    *   FT_ERR_EQ( errcode, err )
58    *   FT_ERR_NEQ( errcode, err )
59    *
60    *     Compare error code `errcode` with the error `err` for equality and
61    *     inequality, respectively.  Example:
62    *
63    *     ```
64    *       if ( FT_ERR_EQ( error, Invalid_Outline ) )
65    *         ...
66    *     ```
67    *
68    *     Using this macro you don't have to think about error prefixes.  Of
69    *     course, if module errors are not active, the above example is the
70    *     same as
71    *
72    *     ```
73    *       if ( error == FT_Err_Invalid_Outline )
74    *         ...
75    *     ```
76    *
77    *   FT_ERROR_BASE( errcode )
78    *   FT_ERROR_MODULE( errcode )
79    *
80    *     Get base error and module error code, respectively.
81    *
82    * It can also be used to create a module error message table easily with
83    * something like
84    *
85    * ```
86    *   #undef FTMODERR_H_
87    *   #define FT_MODERRDEF( e, v, s )  { FT_Mod_Err_ ## e, s },
88    *   #define FT_MODERR_START_LIST     {
89    *   #define FT_MODERR_END_LIST       { 0, 0 } };
90    *
91    *   const struct
92    *   {
93    *     int          mod_err_offset;
94    *     const char*  mod_err_msg
95    *   } ft_mod_errors[] =
96    *
97    *   #include <freetype/ftmoderr.h>
98    * ```
99    *
100    */
101 
102 
103 #ifndef FTMODERR_H_
104 #define FTMODERR_H_
105 
106 
107   /*******************************************************************/
108   /*******************************************************************/
109   /*****                                                         *****/
110   /*****                       SETUP MACROS                      *****/
111   /*****                                                         *****/
112   /*******************************************************************/
113   /*******************************************************************/
114 
115 
116 #undef  FT_NEED_EXTERN_C
117 
118 #ifndef FT_MODERRDEF
119 
120 #ifdef FT_CONFIG_OPTION_USE_MODULE_ERRORS
121 #define FT_MODERRDEF( e, v, s )  FT_Mod_Err_ ## e = v,
122 #else
123 #define FT_MODERRDEF( e, v, s )  FT_Mod_Err_ ## e = 0,
124 #endif
125 
126 #define FT_MODERR_START_LIST  enum {
127 #define FT_MODERR_END_LIST    FT_Mod_Err_Max };
128 
129 #ifdef __cplusplus
130 #define FT_NEED_EXTERN_C
131   extern "C" {
132 #endif
133 
134 #endif /* !FT_MODERRDEF */
135 
136 
137   /*******************************************************************/
138   /*******************************************************************/
139   /*****                                                         *****/
140   /*****               LIST MODULE ERROR BASES                   *****/
141   /*****                                                         *****/
142   /*******************************************************************/
143   /*******************************************************************/
144 
145 
146 #ifdef FT_MODERR_START_LIST
147   FT_MODERR_START_LIST
148 #endif
149 
150 
151   FT_MODERRDEF( Base,      0x000, "base module" )
152   FT_MODERRDEF( Autofit,   0x100, "autofitter module" )
153   FT_MODERRDEF( BDF,       0x200, "BDF module" )
154   FT_MODERRDEF( Bzip2,     0x300, "Bzip2 module" )
155   FT_MODERRDEF( Cache,     0x400, "cache module" )
156   FT_MODERRDEF( CFF,       0x500, "CFF module" )
157   FT_MODERRDEF( CID,       0x600, "CID module" )
158   FT_MODERRDEF( Gzip,      0x700, "Gzip module" )
159   FT_MODERRDEF( LZW,       0x800, "LZW module" )
160   FT_MODERRDEF( OTvalid,   0x900, "OpenType validation module" )
161   FT_MODERRDEF( PCF,       0xA00, "PCF module" )
162   FT_MODERRDEF( PFR,       0xB00, "PFR module" )
163   FT_MODERRDEF( PSaux,     0xC00, "PS auxiliary module" )
164   FT_MODERRDEF( PShinter,  0xD00, "PS hinter module" )
165   FT_MODERRDEF( PSnames,   0xE00, "PS names module" )
166   FT_MODERRDEF( Raster,    0xF00, "raster module" )
167   FT_MODERRDEF( SFNT,     0x1000, "SFNT module" )
168   FT_MODERRDEF( Smooth,   0x1100, "smooth raster module" )
169   FT_MODERRDEF( TrueType, 0x1200, "TrueType module" )
170   FT_MODERRDEF( Type1,    0x1300, "Type 1 module" )
171   FT_MODERRDEF( Type42,   0x1400, "Type 42 module" )
172   FT_MODERRDEF( Winfonts, 0x1500, "Windows FON/FNT module" )
173   FT_MODERRDEF( GXvalid,  0x1600, "GX validation module" )
174 
175 
176 #ifdef FT_MODERR_END_LIST
177   FT_MODERR_END_LIST
178 #endif
179 
180 
181   /*******************************************************************/
182   /*******************************************************************/
183   /*****                                                         *****/
184   /*****                      CLEANUP                            *****/
185   /*****                                                         *****/
186   /*******************************************************************/
187   /*******************************************************************/
188 
189 
190 #ifdef FT_NEED_EXTERN_C
191   }
192 #endif
193 
194 #undef FT_MODERR_START_LIST
195 #undef FT_MODERR_END_LIST
196 #undef FT_MODERRDEF
197 #undef FT_NEED_EXTERN_C
198 
199 
200 #endif /* FTMODERR_H_ */
201 
202 
203 /* END */
204