• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * Copyright (C) 2011 The Android Open Source Project
3  *
4  * Licensed under the Apache License, Version 2.0 (the "License");
5  * you may not use this file except in compliance with the License.
6  * You may obtain a copy of the License at
7  *
8  *      http://www.apache.org/licenses/LICENSE-2.0
9  *
10  * Unless required by applicable law or agreed to in writing, software
11  * distributed under the License is distributed on an "AS IS" BASIS,
12  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13  * See the License for the specific language governing permissions and
14  * limitations under the License.
15  */
16 
17 #include "utf.h"
18 
19 #include <android-base/logging.h>
20 #include <android-base/stringprintf.h>
21 #include <android-base/strings.h>
22 
23 #include "base/casts.h"
24 #include "utf-inl.h"
25 
26 namespace art {
27 
28 using android::base::StringAppendF;
29 
30 // This is used only from debugger and test code.
CountModifiedUtf8Chars(const char * utf8)31 size_t CountModifiedUtf8Chars(const char* utf8) {
32   return CountModifiedUtf8Chars(utf8, strlen(utf8));
33 }
34 
35 /*
36  * This does not validate UTF8 rules (nor did older code). But it gets the right answer
37  * for valid UTF-8 and that's fine because it's used only to size a buffer for later
38  * conversion.
39  *
40  * Modified UTF-8 consists of a series of bytes up to 21 bit Unicode code points as follows:
41  * U+0001  - U+007F   0xxxxxxx
42  * U+0080  - U+07FF   110xxxxx 10xxxxxx
43  * U+0800  - U+FFFF   1110xxxx 10xxxxxx 10xxxxxx
44  * U+10000 - U+1FFFFF 11110xxx 10xxxxxx 10xxxxxx 10xxxxxx
45  *
46  * U+0000 is encoded using the 2nd form to avoid nulls inside strings (this differs from
47  * standard UTF-8).
48  * The four byte encoding converts to two utf16 characters.
49  */
CountModifiedUtf8Chars(const char * utf8,size_t byte_count)50 size_t CountModifiedUtf8Chars(const char* utf8, size_t byte_count) {
51   DCHECK_LE(byte_count, strlen(utf8));
52   size_t len = 0;
53   const char* end = utf8 + byte_count;
54   for (; utf8 < end; ++utf8) {
55     int ic = *utf8;
56     len++;
57     if (LIKELY((ic & 0x80) == 0)) {
58       // One-byte encoding.
59       continue;
60     }
61     // Two- or three-byte encoding.
62     utf8++;
63     if ((ic & 0x20) == 0) {
64       // Two-byte encoding.
65       continue;
66     }
67     utf8++;
68     if ((ic & 0x10) == 0) {
69       // Three-byte encoding.
70       continue;
71     }
72 
73     // Four-byte encoding: needs to be converted into a surrogate
74     // pair.
75     utf8++;
76     len++;
77   }
78   return len;
79 }
80 
81 // This is used only from debugger and test code.
ConvertModifiedUtf8ToUtf16(uint16_t * utf16_data_out,const char * utf8_data_in)82 void ConvertModifiedUtf8ToUtf16(uint16_t* utf16_data_out, const char* utf8_data_in) {
83   while (*utf8_data_in != '\0') {
84     const uint32_t ch = GetUtf16FromUtf8(&utf8_data_in);
85     const uint16_t leading = GetLeadingUtf16Char(ch);
86     const uint16_t trailing = GetTrailingUtf16Char(ch);
87 
88     *utf16_data_out++ = leading;
89     if (trailing != 0) {
90       *utf16_data_out++ = trailing;
91     }
92   }
93 }
94 
ConvertModifiedUtf8ToUtf16(uint16_t * utf16_data_out,size_t out_chars,const char * utf8_data_in,size_t in_bytes)95 void ConvertModifiedUtf8ToUtf16(uint16_t* utf16_data_out, size_t out_chars,
96                                 const char* utf8_data_in, size_t in_bytes) {
97   const char *in_start = utf8_data_in;
98   const char *in_end = utf8_data_in + in_bytes;
99   uint16_t *out_p = utf16_data_out;
100 
101   if (LIKELY(out_chars == in_bytes)) {
102     // Common case where all characters are ASCII.
103     for (const char *p = in_start; p < in_end;) {
104       // Safe even if char is signed because ASCII characters always have
105       // the high bit cleared.
106       *out_p++ = dchecked_integral_cast<uint16_t>(*p++);
107     }
108     return;
109   }
110 
111   // String contains non-ASCII characters.
112   for (const char *p = in_start; p < in_end;) {
113     const uint32_t ch = GetUtf16FromUtf8(&p);
114     const uint16_t leading = GetLeadingUtf16Char(ch);
115     const uint16_t trailing = GetTrailingUtf16Char(ch);
116 
117     *out_p++ = leading;
118     if (trailing != 0) {
119       *out_p++ = trailing;
120     }
121   }
122 }
123 
ConvertUtf16ToModifiedUtf8(char * utf8_out,size_t byte_count,const uint16_t * utf16_in,size_t char_count)124 void ConvertUtf16ToModifiedUtf8(char* utf8_out, size_t byte_count,
125                                 const uint16_t* utf16_in, size_t char_count) {
126   if (LIKELY(byte_count == char_count)) {
127     // Common case where all characters are ASCII.
128     const uint16_t *utf16_end = utf16_in + char_count;
129     for (const uint16_t *p = utf16_in; p < utf16_end;) {
130       *utf8_out++ = dchecked_integral_cast<char>(*p++);
131     }
132     return;
133   }
134 
135   // String contains non-ASCII characters.
136   while (char_count--) {
137     const uint16_t ch = *utf16_in++;
138     if (ch > 0 && ch <= 0x7f) {
139       *utf8_out++ = ch;
140     } else {
141       // Char_count == 0 here implies we've encountered an unpaired
142       // surrogate and we have no choice but to encode it as 3-byte UTF
143       // sequence. Note that unpaired surrogates can occur as a part of
144       // "normal" operation.
145       if ((ch >= 0xd800 && ch <= 0xdbff) && (char_count > 0)) {
146         const uint16_t ch2 = *utf16_in;
147 
148         // Check if the other half of the pair is within the expected
149         // range. If it isn't, we will have to emit both "halves" as
150         // separate 3 byte sequences.
151         if (ch2 >= 0xdc00 && ch2 <= 0xdfff) {
152           utf16_in++;
153           char_count--;
154           const uint32_t code_point = (ch << 10) + ch2 - 0x035fdc00;
155           *utf8_out++ = (code_point >> 18) | 0xf0;
156           *utf8_out++ = ((code_point >> 12) & 0x3f) | 0x80;
157           *utf8_out++ = ((code_point >> 6) & 0x3f) | 0x80;
158           *utf8_out++ = (code_point & 0x3f) | 0x80;
159           continue;
160         }
161       }
162 
163       if (ch > 0x07ff) {
164         // Three byte encoding.
165         *utf8_out++ = (ch >> 12) | 0xe0;
166         *utf8_out++ = ((ch >> 6) & 0x3f) | 0x80;
167         *utf8_out++ = (ch & 0x3f) | 0x80;
168       } else /*(ch > 0x7f || ch == 0)*/ {
169         // Two byte encoding.
170         *utf8_out++ = (ch >> 6) | 0xc0;
171         *utf8_out++ = (ch & 0x3f) | 0x80;
172       }
173     }
174   }
175 }
176 
ComputeUtf16HashFromModifiedUtf8(const char * utf8,size_t utf16_length)177 int32_t ComputeUtf16HashFromModifiedUtf8(const char* utf8, size_t utf16_length) {
178   uint32_t hash = 0;
179   while (utf16_length != 0u) {
180     const uint32_t pair = GetUtf16FromUtf8(&utf8);
181     const uint16_t first = GetLeadingUtf16Char(pair);
182     hash = hash * 31 + first;
183     --utf16_length;
184     const uint16_t second = GetTrailingUtf16Char(pair);
185     if (second != 0) {
186       hash = hash * 31 + second;
187       DCHECK_NE(utf16_length, 0u);
188       --utf16_length;
189     }
190   }
191   return static_cast<int32_t>(hash);
192 }
193 
ComputeModifiedUtf8Hash(const char * chars)194 uint32_t ComputeModifiedUtf8Hash(const char* chars) {
195   uint32_t hash = StartModifiedUtf8Hash();
196   while (*chars != '\0') {
197     hash = UpdateModifiedUtf8Hash(hash, *chars);
198     ++chars;
199   }
200   return hash;
201 }
202 
ComputeModifiedUtf8Hash(std::string_view chars)203 uint32_t ComputeModifiedUtf8Hash(std::string_view chars) {
204   return UpdateModifiedUtf8Hash(StartModifiedUtf8Hash(), chars);
205 }
206 
CompareModifiedUtf8ToUtf16AsCodePointValues(const char * utf8,const uint16_t * utf16,size_t utf16_length)207 int CompareModifiedUtf8ToUtf16AsCodePointValues(const char* utf8, const uint16_t* utf16,
208                                                 size_t utf16_length) {
209   for (;;) {
210     if (*utf8 == '\0') {
211       return (utf16_length == 0) ? 0 : -1;
212     } else if (utf16_length == 0) {
213       return 1;
214     }
215 
216     const uint32_t pair = GetUtf16FromUtf8(&utf8);
217 
218     // First compare the leading utf16 char.
219     const uint16_t lhs = GetLeadingUtf16Char(pair);
220     const uint16_t rhs = *utf16++;
221     --utf16_length;
222     if (lhs != rhs) {
223       return lhs > rhs ? 1 : -1;
224     }
225 
226     // Then compare the trailing utf16 char. First check if there
227     // are any characters left to consume.
228     const uint16_t lhs2 = GetTrailingUtf16Char(pair);
229     if (lhs2 != 0) {
230       if (utf16_length == 0) {
231         return 1;
232       }
233 
234       const uint16_t rhs2 = *utf16++;
235       --utf16_length;
236       if (lhs2 != rhs2) {
237         return lhs2 > rhs2 ? 1 : -1;
238       }
239     }
240   }
241 }
242 
CountUtf8Bytes(const uint16_t * chars,size_t char_count)243 size_t CountUtf8Bytes(const uint16_t* chars, size_t char_count) {
244   size_t result = 0;
245   const uint16_t *end = chars + char_count;
246   while (chars < end) {
247     const uint16_t ch = *chars++;
248     if (LIKELY(ch != 0 && ch < 0x80)) {
249       result++;
250       continue;
251     }
252     if (ch < 0x800) {
253       result += 2;
254       continue;
255     }
256     if (ch >= 0xd800 && ch < 0xdc00) {
257       if (chars < end) {
258         const uint16_t ch2 = *chars;
259         // If we find a properly paired surrogate, we emit it as a 4 byte
260         // UTF sequence. If we find an unpaired leading or trailing surrogate,
261         // we emit it as a 3 byte sequence like would have done earlier.
262         if (ch2 >= 0xdc00 && ch2 < 0xe000) {
263           chars++;
264           result += 4;
265           continue;
266         }
267       }
268     }
269     result += 3;
270   }
271   return result;
272 }
273 
NeedsEscaping(uint16_t ch)274 static inline constexpr bool NeedsEscaping(uint16_t ch) {
275   return (ch < ' ' || ch > '~');
276 }
277 
PrintableChar(uint16_t ch)278 std::string PrintableChar(uint16_t ch) {
279   std::string result;
280   result += '\'';
281   if (NeedsEscaping(ch)) {
282     StringAppendF(&result, "\\u%04x", ch);
283   } else {
284     result += static_cast<std::string::value_type>(ch);
285   }
286   result += '\'';
287   return result;
288 }
289 
PrintableString(const char * utf8)290 std::string PrintableString(const char* utf8) {
291   std::string result;
292   result += '"';
293   const char* p = utf8;
294   size_t char_count = CountModifiedUtf8Chars(p);
295   for (size_t i = 0; i < char_count; ++i) {
296     uint32_t ch = GetUtf16FromUtf8(&p);
297     if (ch == '\\') {
298       result += "\\\\";
299     } else if (ch == '\n') {
300       result += "\\n";
301     } else if (ch == '\r') {
302       result += "\\r";
303     } else if (ch == '\t') {
304       result += "\\t";
305     } else {
306       const uint16_t leading = GetLeadingUtf16Char(ch);
307 
308       if (NeedsEscaping(leading)) {
309         StringAppendF(&result, "\\u%04x", leading);
310       } else {
311         result += static_cast<std::string::value_type>(leading);
312       }
313 
314       const uint32_t trailing = GetTrailingUtf16Char(ch);
315       if (trailing != 0) {
316         // All high surrogates will need escaping.
317         StringAppendF(&result, "\\u%04x", trailing);
318         // Account for the surrogate pair.
319         ++i;
320         DCHECK_LT(i, char_count);
321       }
322     }
323   }
324   result += '"';
325   return result;
326 }
327 
328 }  // namespace art
329