Lines Matching refs:modem

9 PURPOSE = "Verify modem is available for testing."
11 This test will fail if either there is no response to modem status command or
12 modem is in a non testable state after two or more tries.
22   Tests that a cellular modem is available for testing.
24   The test attempts to detect the modem state by running the modem status
26   original modem state and reboots the DUT regardless of what state the modem
27   is in. After the reboot, it tries to get the modem state again and if the
28   modem does not respond or the state is one of the following as listed below,
32   REBOOT STATES (If modem is in any of these states, DUT is cold rebooted using
44   WAIT DELAY STATES (Waits for a maximum of 120 seconds for the modem to get
45   into a testable state. If the modem is still not in a stable state after the