xref: /external/perfetto/protos/perfetto/trace_processor/trace_processor.proto

/*
 * Copyright (C) 2018 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

syntax = "proto2";

package perfetto.protos;

import "protos/perfetto/common/descriptor.proto";
import "protos/perfetto/trace_processor/metatrace_categories.proto";

// This file defines the schema for {,un}marshalling arguments and return values
// when interfacing to the trace processor binary interface.

// The Trace Processor can be used in three modes:
// 1. Fully native from C++ or directly using trace_processor_shell.
//    In this case, this file isn't really relevant because no binary
//    marshalling is involved. Look at include/trace_processor/trace_processor.h
//    for the public C++ API definition.
// 2. Using WASM within the HTML ui. In this case these messages are used to
//    {,un}marshall calls made through the JS<>WASM interop in
//    src/trace_processor/rpc/wasm_bridge.cc .
// 3. Using the HTTP+RPC interface, by running trace_processor_shell -D.
//    In this case these messages are used to {,un}marshall HTTP requests and
//    response made through src/trace_processor/rpc/httpd.cc .

enum TraceProcessorApiVersion {
  // This variable has been introduced in v15 and is used to deal with API
  // mismatches between UI and trace_processor_shell --httpd. Increment this
  // every time a new feature that the UI depends on is being introduced (e.g.
  // new tables, new SQL operators, metrics that are required by the UI).
  // See also StatusResult.api_version (below).
  TRACE_PROCESSOR_CURRENT_API_VERSION = 6;
}

// At lowest level, the wire-format of the RPC procol is a linear sequence of
// TraceProcessorRpc messages on each side of the byte pipe
// Each message is prefixed by a tag (field = 1, type = length delimited) and a
// varint encoding its size (this is so the whole stream can also be read /
// written as if it was a repeated field of TraceProcessorRpcStream).

message TraceProcessorRpcStream {
  repeated TraceProcessorRpc msg = 1;
}

message TraceProcessorRpc {
  // A monotonic counter used only for debugging purposes, to detect if the
  // underlying stream is missing or duping data. The counter starts at 0 on
  // each side of the pipe and is incremented on each message.
  // Do NOT expect that a response has the same |seq| of its corresponding
  // request: some requests (e.g., a query returning many rows) can yield more
  // than one response message, bringing the tx and rq seq our of sync.
  optional int64 seq = 1;

  // This is returned when some unrecoverable error has been detected by the
  // peer. The typical case is TraceProcessor detecting that the |seq| sequence
  // is broken (e.g. when having two tabs open with the same --httpd instance).
  optional string fatal_error = 5;

  enum TraceProcessorMethod {
    TPM_UNSPECIFIED = 0;
    TPM_APPEND_TRACE_DATA = 1;
    TPM_FINALIZE_TRACE_DATA = 2;
    TPM_QUERY_STREAMING = 3;
    // Previously: TPM_QUERY_RAW_DEPRECATED
    reserved 4;
    reserved "TPM_QUERY_RAW_DEPRECATED";
    TPM_COMPUTE_METRIC = 5;
    TPM_GET_METRIC_DESCRIPTORS = 6;
    TPM_RESTORE_INITIAL_TABLES = 7;
    TPM_ENABLE_METATRACE = 8;
    TPM_DISABLE_AND_READ_METATRACE = 9;
    TPM_GET_STATUS = 10;
    TPM_RESET_TRACE_PROCESSOR = 11;
  }

  oneof type {
    // Client -> TraceProcessor requests.
    TraceProcessorMethod request = 2;

    // TraceProcessor -> Client responses.
    TraceProcessorMethod response = 3;

    // This is sent back instead of filling |response| when the client sends a
    // |request| which is not known by the TraceProcessor service. This can
    // happen when the client is newer than the service.
    TraceProcessorMethod invalid_request = 4;
  }

  // Request/Response arguments.
  // Not all requests / responses require an argument.

  oneof args {
    // TraceProcessorMethod request args.

    // For TPM_APPEND_TRACE_DATA.
    bytes append_trace_data = 101;
    // For TPM_QUERY_STREAMING.
    QueryArgs query_args = 103;
    // For TPM_COMPUTE_METRIC.
    ComputeMetricArgs compute_metric_args = 105;
    // For TPM_ENABLE_METATRACE.
    EnableMetatraceArgs enable_metatrace_args = 106;
    // For TPM_RESET_TRACE_PROCESSOR.
    ResetTraceProcessorArgs reset_trace_processor_args = 107;

    // TraceProcessorMethod response args.
    // For TPM_APPEND_TRACE_DATA.
    AppendTraceDataResult append_result = 201;
    // For TPM_QUERY_STREAMING.
    QueryResult query_result = 203;
    // For TPM_COMPUTE_METRIC.
    ComputeMetricResult metric_result = 205;
    // For TPM_GET_METRIC_DESCRIPTORS.
    DescriptorSet metric_descriptors = 206;
    // For TPM_DISABLE_AND_READ_METATRACE.
    DisableAndReadMetatraceResult metatrace = 209;
    // For TPM_GET_STATUS.
    StatusResult status = 210;
  }

  // Previously: RawQueryArgs for TPM_QUERY_RAW_DEPRECATED
  reserved 104;
  // Previously: RawQueryResult for TPM_QUERY_RAW_DEPRECATED
  reserved 204;
}

message AppendTraceDataResult {
  optional int64 total_bytes_parsed = 1;
  optional string error = 2;
}

message QueryArgs {
  optional string sql_query = 1;
  // Was time_queued_ns
  reserved 2;
  // Optional string to tag this query with for performance diagnostic purposes.
  optional string tag = 3;
}

// Output for the /query endpoint.
// Returns a query result set, grouping cells into batches. Batching allows a
// more efficient encoding of results, at the same time allowing to return
// O(M) results in a pipelined fashion, without full-memory buffering.
// Batches are split when either a large number of cells (~thousands) is reached
// or the string/blob payload becomes too large (~hundreds of KB).
// Data is batched in cells, scanning results by row -> column. e.g. if a query
// returns 3 columns and 2 rows, the cells will be emitted in this order:
// R0C0, R0C1, R0C2, R1C0, R1C1, R1C2.
message QueryResult {
  // This determines the number and names of columns.
  repeated string column_names = 1;

  // If non-emty the query returned an error. Note that some cells might still
  // be present, if the error happened while iterating.
  optional string error = 2;

  // A batch contains an array of cell headers, stating the type of each cell.
  // The payload of each cell is stored in the corresponding xxx_cells field
  // below (unless the cell is NULL).
  // So if |cells| contains: [VARINT, FLOAT64, VARINT, STRING], the results will
  // be available as:
  // [varint_cells[0], float64_cells[0], varint_cells[1], string_cells[0]].
  message CellsBatch {
    enum CellType {
      CELL_INVALID = 0;
      CELL_NULL = 1;
      CELL_VARINT = 2;
      CELL_FLOAT64 = 3;
      CELL_STRING = 4;
      CELL_BLOB = 5;
    }
    repeated CellType cells = 1 [packed = true];

    repeated int64 varint_cells = 2 [packed = true];
    repeated double float64_cells = 3 [packed = true];
    repeated bytes blob_cells = 4;

    // The string cells are concatenated in a single field. Each cell is
    // NUL-terminated. This is because JS incurs into a non-negligible overhead
    // when decoding strings and one decode + split('\0') is measurably faster
    // than decoding N strings. See goto.google.com/postmessage-benchmark .
    optional string string_cells = 5;

    // If true this is the last batch for the query result.
    optional bool is_last_batch = 6;

    // Padding field. Used only to re-align and fill gaps in the binary format.
    reserved 7;
  }
  repeated CellsBatch batch = 3;

  // The number of statements in the provided SQL.
  optional uint32 statement_count = 4;

  // The number of statements which produced output rows in the provided SQL.
  optional uint32 statement_with_output_count = 5;
}

// Input for the /status endpoint.
message StatusArgs {}

// Output for the /status endpoint.
message StatusResult {
  // If present and not empty, a trace is already loaded already. This happens
  // when using the HTTP+RPC mode nad passing a trace file to the shell, via
  // trace_processor_shell -D trace_file.pftrace .
  optional string loaded_trace_name = 1;

  // Typically something like "v11.0.123", but could be just "v11" or "unknown",
  // for binaries built from Bazel or other build configurations. This is for
  // human presentation only, don't attempt to parse and reason on it.
  optional string human_readable_version = 2;

  // The API version is incremented every time a change that the UI depends
  // on is introduced (e.g. adding a new table that the UI queries).
  optional int32 api_version = 3;
}

// Input for the /compute_metric endpoint.
message ComputeMetricArgs {
  enum ResultFormat {
    BINARY_PROTOBUF = 0;
    TEXTPROTO = 1;
  }
  repeated string metric_names = 1;
  optional ResultFormat format = 2;
}

// Output for the /compute_metric endpoint.
message ComputeMetricResult {
  oneof result {
    // This is meant to contain a perfetto.protos.TraceMetrics. We're using
    // bytes instead of the actual type because we do not want to generate
    // protozero code for the metrics protos. We always encode/decode metrics
    // using a reflection based mechanism that does not require the compiled C++
    // code. This allows us to read in new protos at runtime.
    bytes metrics = 1;

    // A perfetto.protos.TraceMetrics formatted as prototext.
    string metrics_as_prototext = 3;
  }

  optional string error = 2;
}

// Input for the /enable_metatrace endpoint.
message EnableMetatraceArgs {
  optional MetatraceCategories categories = 1;
}

// Output for the /enable_metatrace endpoint.
message EnableMetatraceResult {}

// Input for the /disable_and_read_metatrace endpoint.
message DisableAndReadMetatraceArgs {}

// Output for the /disable_and_read_metatrace endpoint.
message DisableAndReadMetatraceResult {
  // Bytes of perfetto.protos.Trace message. Stored as bytes
  // to avoid adding a dependency on trace.proto.
  optional bytes metatrace = 1;
  optional string error = 2;
}

// Convenience wrapper for multiple descriptors, similar to FileDescriptorSet
// in descriptor.proto.
message DescriptorSet {
  repeated DescriptorProto descriptors = 1;
}

// Input for setting Trace Processor config. This method works only in the WASM
// mode. trace_processor_shell supports configuration through command line
// flags.
message ResetTraceProcessorArgs {
  enum DropTrackEventDataBefore {
    NO_DROP = 0;
    TRACK_EVENT_RANGE_OF_INTEREST = 1;
  }
  // Mirror of the corresponding perfetto::trace_processor::Config fields.
  optional DropTrackEventDataBefore drop_track_event_data_before = 1;
  optional bool ingest_ftrace_in_raw_table = 2;
  optional bool analyze_trace_proto_content = 3;
}