#!/usr/bin/env python3 # # Copyright (c) 2016, The OpenThread Authors. # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # 3. Neither the name of the copyright holder nor the # names of its contributors may be used to endorse or promote products # derived from this software without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE # ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # import unittest import copy import config import thread_cert from pktverify.consts import WIRESHARK_OVERRIDE_PREFS, MLE_CHILD_UPDATE_REQUEST, MLE_CHILD_UPDATE_RESPONSE, MLE_DATA_RESPONSE, MLE_CHILD_ID_REQUEST, MLE_CHILD_ID_RESPONSE, ACTIVE_TIMESTAMP_TLV, RESPONSE_TLV, LINK_LAYER_FRAME_COUNTER_TLV, MODE_TLV, TIMEOUT_TLV, VERSION_TLV, TLV_REQUEST_TLV, ADDRESS16_TLV, NETWORK_DATA_TLV, ROUTE64_TLV, MODE_TLV, TIMEOUT_TLV, CHALLENGE_TLV, SOURCE_ADDRESS_TLV, LEADER_DATA_TLV, ADDRESS_REGISTRATION_TLV from pktverify.packet_verifier import PacketVerifier from pktverify.addrs import Ipv6Addr from pktverify.null_field import nullField LEADER = 1 ROUTER = 2 SED1 = 3 MED1 = 4 MTDS = [SED1, MED1] PREFIX_2001 = '2001::/64' PREFIX_2002 = '2002::/64' # Test Purpose and Description: # ----------------------------- # The purpose of this test case is to verify that global prefix information can # be set on the DUT, which is acting as a Leader in the Thread network. The DUT # must also demonstrate that it correctly sets the Network Data (stable/non-stable) # and propagates it properly in an already formed network. # # Test Topology: # ------------- # SED # | # ROUTER - Leader(DUT) - MED # # DUT Types: # ---------- # Leader class Cert_7_1_3_BorderRouterAsLeader(thread_cert.TestCase): USE_MESSAGE_FACTORY = False TOPOLOGY = { LEADER: { 'name': 'LEADER', 'mode': 'rdn', 'allowlist': [ROUTER, SED1, MED1] }, ROUTER: { 'name': 'ROUTER', 'mode': 'rdn', 'allowlist': [LEADER] }, SED1: { 'name': 'SED', 'is_mtd': True, 'mode': '-', 'timeout': config.DEFAULT_CHILD_TIMEOUT, 'allowlist': [LEADER] }, MED1: { 'name': 'MED', 'is_mtd': True, 'mode': 'rn', 'allowlist': [LEADER] }, } # override wireshark preferences with case needed parameters CASE_WIRESHARK_PREFS = copy.deepcopy(WIRESHARK_OVERRIDE_PREFS) CASE_WIRESHARK_PREFS['6lowpan.context1'] = PREFIX_2001 CASE_WIRESHARK_PREFS['6lowpan.context2'] = PREFIX_2002 def test(self): self.nodes[LEADER].start() self.simulator.go(config.LEADER_STARTUP_DELAY) self.assertEqual(self.nodes[LEADER].get_state(), 'leader') self.nodes[ROUTER].start() self.simulator.go(config.ROUTER_STARTUP_DELAY) self.assertEqual(self.nodes[ROUTER].get_state(), 'router') self.nodes[SED1].start() self.simulator.go(5) self.assertEqual(self.nodes[SED1].get_state(), 'child') self.nodes[MED1].start() self.simulator.go(5) self.assertEqual(self.nodes[MED1].get_state(), 'child') self.nodes[LEADER].add_prefix(PREFIX_2001, 'paros') self.nodes[LEADER].add_prefix(PREFIX_2002, 'paro') self.nodes[LEADER].register_netdata() self.simulator.go(5) def verify(self, pv): pkts = pv.pkts pv.summary.show() LEADER = pv.vars['LEADER'] ROUTER = pv.vars['ROUTER'] SED = pv.vars['SED'] MED = pv.vars['MED'] # Step 1: Ensure topology is formed correctly pv.verify_attached('ROUTER', 'LEADER') pv.verify_attached('SED', 'LEADER', 'MTD') pv.verify_attached('MED', 'LEADER', 'MTD') # Step 3: The DUT MUST send a multicast MLE Data Response, # including the following TLVs: # - Network Data TLV # At least two Prefix TLVs (Prefix 1 and Prefix 2), # each including: # - 6LoWPAN ID sub-TLV # - Border Router sub-TLV pkts.filter_wpan_src64(LEADER).\ filter_LLANMA().\ filter_mle_cmd(MLE_DATA_RESPONSE).\ filter(lambda p: { Ipv6Addr(PREFIX_2001[:-3]), Ipv6Addr(PREFIX_2002[:-3]) } == set(p.thread_nwd.tlv.prefix) and\ p.thread_nwd.tlv.border_router.flag.p == [1, 1] and\ p.thread_nwd.tlv.border_router.flag.s == [1, 1] and\ p.thread_nwd.tlv.border_router.flag.r == [1, 1] and\ p.thread_nwd.tlv.border_router.flag.o == [1, 1] and\ p.thread_nwd.tlv.stable == [0, 1, 1, 1, 0, 0, 0] ).\ must_next() # Step 4: MED automatically sends the global address configured to its parent # (the DUT), via the Address Registration TLV included in its Child # Update Request keep-alive message. # Step 5: The DUT MUST send a MLE Child Update Response to MED # The following TLVs MUST be present in the Child Update Response: # - Source Address TLV # - Address Registration TLV # - Echoes back addresses configured in step 4 # - Mode TLV with pkts.save_index(): _pkt = pkts.filter_wpan_src64(MED).\ filter_wpan_dst64(LEADER).\ filter_mle_cmd(MLE_CHILD_UPDATE_REQUEST).\ must_next() pkts.filter_wpan_src64(LEADER).\ filter_wpan_dst64(MED).\ filter_mle_cmd(MLE_CHILD_UPDATE_RESPONSE).\ filter(lambda p: { SOURCE_ADDRESS_TLV, MODE_TLV, ADDRESS_REGISTRATION_TLV } <= set(p.mle.tlv.type) and\ p.mle.tlv.addr_reg_iid is not nullField and\ set(_pkt.mle.tlv.addr_reg_iid) > set(p.mle.tlv.addr_reg_iid) ).\ must_next() # Step 6: The DUT MUST send a MLE Child Update Request or MLE Data # Response to SED, including the following TLVs: # - Network Data TLV # - Source Address TLV # - Leader Data TLV # - Active Timestamp TLV pkts.filter_wpan_src64(LEADER).\ filter_wpan_dst64(SED).\ filter_mle_cmd2(MLE_CHILD_UPDATE_REQUEST, MLE_DATA_RESPONSE).\ filter(lambda p: { NETWORK_DATA_TLV, SOURCE_ADDRESS_TLV, LEADER_DATA_TLV, ACTIVE_TIMESTAMP_TLV } <= set(p.mle.tlv.type) and\ [Ipv6Addr(PREFIX_2001[:-3])] == p.thread_nwd.tlv.prefix and\ p.thread_nwd.tlv.border_router.flag.p == [1] and\ p.thread_nwd.tlv.border_router.flag.s == [1] and\ p.thread_nwd.tlv.border_router.flag.r == [1] and\ p.thread_nwd.tlv.border_router.flag.o == [1] and\ p.thread_nwd.tlv.stable == [1, 1, 1] ).\ must_next() # Step 9: After receiving the MLE Data Response or MLE Child Update Request, # SED automatically sends its global address configured to the Leader, # in the Address Registration TLV from the Child Update request command # Step 10: The DUT MUST send a MLE Child Update Response, each, to SED # The following TLVs MUST be present in the Child Update Response: # - Source Address TLV # - Address Registration TLV # - Echoes back addresses configured in step 9 # - Mode TLV _pkt = pkts.filter_wpan_src64(SED).\ filter_wpan_dst64(LEADER).\ filter_mle_cmd(MLE_CHILD_UPDATE_REQUEST).\ must_next() pkts.filter_wpan_src64(LEADER).\ filter_wpan_dst64(SED).\ filter_mle_cmd(MLE_CHILD_UPDATE_RESPONSE).\ filter(lambda p: { SOURCE_ADDRESS_TLV, MODE_TLV, ADDRESS_REGISTRATION_TLV } <= set(p.mle.tlv.type) and\ p.mle.tlv.addr_reg_iid is not nullField and\ set(_pkt.mle.tlv.addr_reg_iid) > set(p.mle.tlv.addr_reg_iid) ).\ must_next() if __name__ == '__main__': unittest.main()