#!/usr/bin/env python3 # # Copyright (c) 2016, The OpenThread Authors. # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # 3. Neither the name of the copyright holder nor the # names of its contributors may be used to endorse or promote products # derived from this software without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE # ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # import unittest import config import thread_cert from pktverify.consts import WIRESHARK_OVERRIDE_PREFS, MLE_CHILD_UPDATE_REQUEST, MLE_CHILD_UPDATE_RESPONSE, MLE_DATA_RESPONSE, MLE_CHILD_ID_REQUEST, MLE_CHILD_ID_RESPONSE, SVR_DATA_URI, ACTIVE_TIMESTAMP_TLV, RESPONSE_TLV, LINK_LAYER_FRAME_COUNTER_TLV, MODE_TLV, TIMEOUT_TLV, VERSION_TLV, TLV_REQUEST_TLV, ADDRESS16_TLV, NETWORK_DATA_TLV, ROUTE64_TLV, MODE_TLV, TIMEOUT_TLV, CHALLENGE_TLV, SOURCE_ADDRESS_TLV, LEADER_DATA_TLV, ADDRESS_REGISTRATION_TLV from pktverify.packet_verifier import PacketVerifier from pktverify.addrs import Ipv6Addr LEADER = 1 ROUTER = 2 MED = 3 SED = 4 MTDS = [MED, SED] PREFIX_2001 = '2001::/64' PREFIX_2002 = '2002::/64' PREFIX_2003 = '2003::/64' # Test Purpose and Description: # ----------------------------- # The purpose of this test case is to verify that the DUT sends properly formatted # Server Data Notification CoAP frame when a third global prefix information is # set on the DUT. The DUT must also correctly set Network Data aggregated and # disseminated by the Leader and transmit it properly to all child devices already # attached to it. # # Test Topology: # ------------- # SED # | # Router(DUT) - MED # | # Leader # # DUT Types: # ---------- # Router class Cert_7_1_5_BorderRouterAsRouter(thread_cert.TestCase): USE_MESSAGE_FACTORY = False TOPOLOGY = { LEADER: { 'name': 'LEADER', 'mode': 'rdn', 'allowlist': [ROUTER] }, ROUTER: { 'name': 'ROUTER', 'mode': 'rdn', 'allowlist': [LEADER, MED, SED] }, MED: { 'name': 'MED', 'is_mtd': True, 'mode': 'rn', 'allowlist': [ROUTER] }, SED: { 'name': 'SED', 'is_mtd': True, 'mode': '-', 'timeout': config.DEFAULT_CHILD_TIMEOUT, 'allowlist': [ROUTER] }, } def test(self): self.nodes[LEADER].start() self.simulator.go(config.LEADER_STARTUP_DELAY) self.assertEqual(self.nodes[LEADER].get_state(), 'leader') self.nodes[ROUTER].start() self.simulator.go(config.ROUTER_STARTUP_DELAY) self.assertEqual(self.nodes[ROUTER].get_state(), 'router') self.nodes[MED].start() self.simulator.go(5) self.assertEqual(self.nodes[MED].get_state(), 'child') self.nodes[SED].start() self.simulator.go(5) self.assertEqual(self.nodes[SED].get_state(), 'child') self.nodes[ROUTER].add_prefix(PREFIX_2001, 'paros') self.nodes[ROUTER].add_prefix(PREFIX_2002, 'paro') self.nodes[ROUTER].add_prefix(PREFIX_2003, 'paos') self.nodes[ROUTER].register_netdata() self.simulator.go(10) def verify(self, pv): pkts = pv.pkts pv.summary.show() LEADER = pv.vars['LEADER'] ROUTER = pv.vars['ROUTER'] SED = pv.vars['SED'] MED = pv.vars['MED'] # Step 1: Ensure topology is formed correctly pv.verify_attached('ROUTER', 'LEADER') pv.verify_attached('MED', 'ROUTER', 'MTD') pv.verify_attached('SED', 'ROUTER', 'MTD') # Step 3: The DUT MUST send a CoAP Server Data Notification frame # to the Leader including the server’s information(Prefix, # Border Router) for all three prefixes (Prefix 1, 2 and 3): # CoAP Request URI # coap://[]:MM/a/sd # CoAP Payload # Thread Network Data TLV pkts.filter_wpan_src64(ROUTER).\ filter_coap_request(SVR_DATA_URI).\ filter(lambda p: { Ipv6Addr(PREFIX_2001[:-3]), Ipv6Addr(PREFIX_2002[:-3]), Ipv6Addr(PREFIX_2003[:-3]) } == set(p.thread_nwd.tlv.prefix) ).\ must_next() _index = pkts.index # Step 5: The DUT MUST send a multicast MLE Data Response, # including at least three Prefix TLVs (Prefix 1, Prefix2, # and Prefix 3). with pkts.save_index(): _dv_pkt = pkts.filter_wpan_src64(ROUTER).\ filter_LLANMA().\ filter_mle_cmd(MLE_DATA_RESPONSE).\ filter(lambda p: { Ipv6Addr(PREFIX_2001[:-3]), Ipv6Addr(PREFIX_2002[:-3]), Ipv6Addr(PREFIX_2003[:-3]) } <= set(p.thread_nwd.tlv.prefix) ).\ must_next() # Step 6: MED automatically sends MLE Child Update Request to its parent # (DUT), reporting its configured global addresses in the Address # Registration TLV # Step 7: The DUT MUST send a MLE Child Update Response to MED # The following TLVs MUST be present in the Child Update Response: # - Source Address TLV # - Address Registration TLV # - Echoes back addresses configured in step 4 # - Mode TLV _pkt = pkts.filter_wpan_src64(MED).\ filter_wpan_dst64(ROUTER).\ filter_mle_cmd(MLE_CHILD_UPDATE_REQUEST).\ filter(lambda p: len(p.mle.tlv.addr_reg_iid) >= 4).\ must_next() pkts.filter_wpan_src64(ROUTER).\ filter_wpan_dst64(MED).\ filter_mle_cmd(MLE_CHILD_UPDATE_RESPONSE).\ filter(lambda p: { SOURCE_ADDRESS_TLV, MODE_TLV, ADDRESS_REGISTRATION_TLV } <= set(p.mle.tlv.type) and\ len(p.mle.tlv.addr_reg_iid) >= 3 and\ set(p.mle.tlv.addr_reg_iid) < set(_pkt.mle.tlv.addr_reg_iid) ).\ must_next() # Step 8: The DUT MUST send a MLE Child Update Request or MLE Data # Response to SED, including the following TLVs: # - Network Data TLV # At least two Prefix TLVs (Prefix 1 and Prefix3) # - Border Router TLV # - P_border_router_16<0xFFFE> # Prefix 2 TLV MUST NOT be included # - Source Address TLV # - Leader Data TLV # Data version numbers should be the same as the ones # sent in the multicast data response in step 5. # - Active Timestamp TLV pkts.range(_index).filter_wpan_src64(ROUTER).\ filter_wpan_dst64(SED).\ filter_mle_cmd2(MLE_CHILD_UPDATE_REQUEST, MLE_DATA_RESPONSE).\ filter(lambda p: { NETWORK_DATA_TLV, SOURCE_ADDRESS_TLV, LEADER_DATA_TLV, ACTIVE_TIMESTAMP_TLV } <= set(p.mle.tlv.type) and\ { Ipv6Addr(PREFIX_2001[:-3]), Ipv6Addr(PREFIX_2003[:-3]) } == set(p.thread_nwd.tlv.prefix) and\ p.mle.tlv.leader_data.data_version == _dv_pkt.mle.tlv.leader_data.data_version and\ [0xFFFE, 0xFFFE] == p.thread_nwd.tlv.border_router_16 ).\ must_next() # Step 9: SED automatically sends its global address configured to the Leader, # in the Address Registration TLV from the Child Update request command # Step 10: The DUT MUST send a MLE Child Update Response, each, to SED # The following TLVs MUST be present in the Child Update Response: # - Source Address TLV # - Address Registration TLV # - Echoes back addresses configured in step 9 # - Mode TLV _pkt = pkts.filter_wpan_src64(SED).\ filter_wpan_dst64(ROUTER).\ filter_mle_cmd(MLE_CHILD_UPDATE_REQUEST).\ filter(lambda p: len(p.mle.tlv.addr_reg_iid) >= 3).\ must_next() pkts.filter_wpan_src64(ROUTER).\ filter_wpan_dst64(SED).\ filter_mle_cmd(MLE_CHILD_UPDATE_RESPONSE).\ filter(lambda p: { SOURCE_ADDRESS_TLV, MODE_TLV, ADDRESS_REGISTRATION_TLV } <= set(p.mle.tlv.type) and\ len(p.mle.tlv.addr_reg_iid) >= 2 and\ set(p.mle.tlv.addr_reg_iid) < set(_pkt.mle.tlv.addr_reg_iid) ).\ must_next() if __name__ == '__main__': unittest.main()