on property:persist.vendor.log.thermal=1
    start vendor.thermal.logd

on property:persist.vendor.log.thermal=0
    stop vendor.thermal.logd

on property:persist.vendor.log.thermal=1 && property:persist.vendor.log.thermal.interval=*
    restart vendor.thermal.logd

service vendor.thermal.logd /vendor/bin/thermal_logd ${persist.vendor.log.thermal.interval:-5}
    class main
    user root
    group root system
    disabled

# Switch thermal protection for Pixels
on property:persist.vendor.disable.thermal.control=*
    setprop vendor.disable.thermal.control ${persist.vendor.disable.thermal.control}

on property:persist.vendor.disable.thermalhal.control=*
    setprop vendor.disable.thermalhal.control ${persist.vendor.disable.thermalhal.control}

on property:persist.vendor.disable.usb.overheat.mitigation=*
    setprop vendor.disable.usb.overheat.mitigation.control ${persist.vendor.disable.usb.overheat.mitigation}

on property:persist.vendor.disable.bcl.control=*
    setprop vendor.disable.bcl.control ${persist.vendor.disable.bcl.control}

on property:vendor.disable.thermalhal.control=* && property:vendor.thermal.link_ready=1
    restart vendor.thermal-hal

on property:vendor.disable.thermal.control=1 && property:vendor.thermal.link_ready=1
    setprop vendor.disable.thermalhal.control 1

on property:vendor.disable.thermal.control=0 && property:vendor.thermal.link_ready=1
    setprop vendor.disable.thermalhal.control 0

# Toggle BCL control
on property:vendor.disable.bcl.control=1
    write /dev/thermal/tz-by-name/soc/mode disabled

on property:vendor.disable.bcl.control=0
    write /dev/thermal/tz-by-name/soc/mode enabled

# Switch USB port overheat protection
on property:vendor.disable.usb.overheat.mitigation.control=1
    write /sys/module/overheat_mitigation/parameters/enable 0
    write /dev/thermal/tz-by-name/usb_pwr_therm2/emul_temp 25000

on property:vendor.disable.usb.overheat.mitigation.control=0
    write /sys/module/overheat_mitigation/parameters/enable 1
    write /dev/thermal/tz-by-name/usb_pwr_therm2/emul_temp 0