• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * (C) Copyright 2000-2005
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * See file CREDITS for list of people who contributed to this
6  * project.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License along
19  * with this program; if not, see <http://www.gnu.org/licenses/>.
20  *
21  ********************************************************************
22  * NOTE: This header file defines an interface to U-Boot. Including
23  * this (unmodified) header file in another file is considered normal
24  * use of U-Boot, and does *not* fall under the heading of "derived
25  * work".
26  ********************************************************************
27  */
28 
29 #ifndef __UBOOT_IMAGE_H__
30 #define __UBOOT_IMAGE_H__
31 
32 /*
33  * Operating System Codes
34  */
35 #define IH_OS_INVALID		0	/* Invalid OS	*/
36 #define IH_OS_OPENBSD		1	/* OpenBSD	*/
37 #define IH_OS_NETBSD		2	/* NetBSD	*/
38 #define IH_OS_FREEBSD		3	/* FreeBSD	*/
39 #define IH_OS_4_4BSD		4	/* 4.4BSD	*/
40 #define IH_OS_LINUX		5	/* Linux	*/
41 #define IH_OS_SVR4		6	/* SVR4		*/
42 #define IH_OS_ESIX		7	/* Esix		*/
43 #define IH_OS_SOLARIS		8	/* Solaris	*/
44 #define IH_OS_IRIX		9	/* Irix		*/
45 #define IH_OS_SCO		10	/* SCO		*/
46 #define IH_OS_DELL		11	/* Dell		*/
47 #define IH_OS_NCR		12	/* NCR		*/
48 #define IH_OS_LYNXOS		13	/* LynxOS	*/
49 #define IH_OS_VXWORKS		14	/* VxWorks	*/
50 #define IH_OS_PSOS		15	/* pSOS		*/
51 #define IH_OS_QNX		16	/* QNX		*/
52 #define IH_OS_U_BOOT		17	/* Firmware	*/
53 #define IH_OS_RTEMS		18	/* RTEMS	*/
54 #define IH_OS_ARTOS		19	/* ARTOS	*/
55 #define IH_OS_UNITY		20	/* Unity OS	*/
56 
57 /*
58  * CPU Architecture Codes (supported by Linux)
59  */
60 #define IH_CPU_INVALID		0	/* Invalid CPU	*/
61 #define IH_CPU_ALPHA		1	/* Alpha	*/
62 #define IH_CPU_ARM		2	/* ARM		*/
63 #define IH_CPU_I386		3	/* Intel x86	*/
64 #define IH_CPU_IA64		4	/* IA64		*/
65 #define IH_CPU_MIPS		5	/* MIPS		*/
66 #define IH_CPU_MIPS64		6	/* MIPS	 64 Bit */
67 #define IH_CPU_PPC		7	/* PowerPC	*/
68 #define IH_CPU_S390		8	/* IBM S390	*/
69 #define IH_CPU_SH		9	/* SuperH	*/
70 #define IH_CPU_SPARC		10	/* Sparc	*/
71 #define IH_CPU_SPARC64		11	/* Sparc 64 Bit */
72 #define IH_CPU_M68K		12	/* M68K		*/
73 #define IH_CPU_NIOS		13	/* Nios-32	*/
74 #define IH_CPU_MICROBLAZE	14	/* MicroBlaze   */
75 #define IH_CPU_NIOS2		15	/* Nios-II	*/
76 #define IH_CPU_BLACKFIN		16	/* Blackfin	*/
77 #define IH_CPU_AVR32		17	/* AVR32	*/
78 
79 /*
80  * Image Types
81  *
82  * "Standalone Programs" are directly runnable in the environment
83  *	provided by U-Boot; it is expected that (if they behave
84  *	well) you can continue to work in U-Boot after return from
85  *	the Standalone Program.
86  * "OS Kernel Images" are usually images of some Embedded OS which
87  *	will take over control completely. Usually these programs
88  *	will install their own set of exception handlers, device
89  *	drivers, set up the MMU, etc. - this means, that you cannot
90  *	expect to re-enter U-Boot except by resetting the CPU.
91  * "RAMDisk Images" are more or less just data blocks, and their
92  *	parameters (address, size) are passed to an OS kernel that is
93  *	being started.
94  * "Multi-File Images" contain several images, typically an OS
95  *	(Linux) kernel image and one or more data images like
96  *	RAMDisks. This construct is useful for instance when you want
97  *	to boot over the network using BOOTP etc., where the boot
98  *	server provides just a single image file, but you want to get
99  *	for instance an OS kernel and a RAMDisk image.
100  *
101  *	"Multi-File Images" start with a list of image sizes, each
102  *	image size (in bytes) specified by an "uint32_t" in network
103  *	byte order. This list is terminated by an "(uint32_t)0".
104  *	Immediately after the terminating 0 follow the images, one by
105  *	one, all aligned on "uint32_t" boundaries (size rounded up to
106  *	a multiple of 4 bytes - except for the last file).
107  *
108  * "Firmware Images" are binary images containing firmware (like
109  *	U-Boot or FPGA images) which usually will be programmed to
110  *	flash memory.
111  *
112  * "Script files" are command sequences that will be executed by
113  *	U-Boot's command interpreter; this feature is especially
114  *	useful when you configure U-Boot to use a real shell (hush)
115  *	as command interpreter (=> Shell Scripts).
116  */
117 
118 #define IH_TYPE_INVALID		0	/* Invalid Image		*/
119 #define IH_TYPE_STANDALONE	1	/* Standalone Program		*/
120 #define IH_TYPE_KERNEL		2	/* OS Kernel Image		*/
121 #define IH_TYPE_RAMDISK		3	/* RAMDisk Image		*/
122 #define IH_TYPE_MULTI		4	/* Multi-File Image		*/
123 #define IH_TYPE_FIRMWARE	5	/* Firmware Image		*/
124 #define IH_TYPE_SCRIPT		6	/* Script file			*/
125 #define IH_TYPE_FILESYSTEM	7	/* Filesystem Image (any type)	*/
126 #define IH_TYPE_FLATDT		8	/* Binary Flat Device Tree Blob	*/
127 
128 /*
129  * Compression Types
130  */
131 #define IH_COMP_NONE		0	/*  No	 Compression Used	*/
132 #define IH_COMP_GZIP		1	/* gzip	 Compression Used	*/
133 #define IH_COMP_BZIP2		2	/* bzip2 Compression Used	*/
134 
135 #define IH_MAGIC	0x27051956	/* Image Magic Number		*/
136 #define IH_NMLEN		32	/* Image Name Length		*/
137 
138 /*
139  * all data in network byte order (aka natural aka bigendian)
140  */
141 
142 typedef struct uboot_image_header {
143 	uint32_t	ih_magic;	/* Image Header Magic Number	*/
144 	uint32_t	ih_hcrc;	/* Image Header CRC Checksum	*/
145 	uint32_t	ih_time;	/* Image Creation Timestamp	*/
146 	uint32_t	ih_size;	/* Image Data Size		*/
147 	uint32_t	ih_load;	/* Data	 Load  Address		*/
148 	uint32_t	ih_ep;		/* Entry Point Address		*/
149 	uint32_t	ih_dcrc;	/* Image Data CRC Checksum	*/
150 	uint8_t		ih_os;		/* Operating System		*/
151 	uint8_t		ih_arch;	/* CPU architecture		*/
152 	uint8_t		ih_type;	/* Image Type			*/
153 	uint8_t		ih_comp;	/* Compression Type		*/
154 	uint8_t		ih_name[IH_NMLEN];	/* Image Name		*/
155 } uboot_image_header_t;
156 
157 
158 #endif	/* __IMAGE_H__ */
159