1 /* 2 * linux/can/netlink.h 3 * 4 * Definitions for the CAN netlink interface 5 * 6 * Copyright (c) 2009 Wolfgang Grandegger <wg@grandegger.com> 7 * 8 * Send feedback to <socketcan-users@lists.berlios.de> 9 * 10 */ 11 12 #ifndef CAN_NETLINK_H 13 #define CAN_NETLINK_H 14 15 #include <linux/types.h> 16 17 /* 18 * CAN bit-timing parameters 19 * 20 * For futher information, please read chapter "8 BIT TIMING 21 * REQUIREMENTS" of the "Bosch CAN Specification version 2.0" 22 * at http://www.semiconductors.bosch.de/pdf/can2spec.pdf. 23 */ 24 struct can_bittiming { 25 __u32 bitrate; /* Bit-rate in bits/second */ 26 __u32 sample_point; /* Sample point in one-tenth of a percent */ 27 __u32 tq; /* Time quanta (TQ) in nanoseconds */ 28 __u32 prop_seg; /* Propagation segment in TQs */ 29 __u32 phase_seg1; /* Phase buffer segment 1 in TQs */ 30 __u32 phase_seg2; /* Phase buffer segment 2 in TQs */ 31 __u32 sjw; /* Synchronisation jump width in TQs */ 32 __u32 brp; /* Bit-rate prescaler */ 33 }; 34 35 /* 36 * CAN harware-dependent bit-timing constant 37 * 38 * Used for calculating and checking bit-timing parameters 39 */ 40 struct can_bittiming_const { 41 char name[16]; /* Name of the CAN controller hardware */ 42 __u32 tseg1_min; /* Time segement 1 = prop_seg + phase_seg1 */ 43 __u32 tseg1_max; 44 __u32 tseg2_min; /* Time segement 2 = phase_seg2 */ 45 __u32 tseg2_max; 46 __u32 sjw_max; /* Synchronisation jump width */ 47 __u32 brp_min; /* Bit-rate prescaler */ 48 __u32 brp_max; 49 __u32 brp_inc; 50 }; 51 52 /* 53 * CAN clock parameters 54 */ 55 struct can_clock { 56 __u32 freq; /* CAN system clock frequency in Hz */ 57 }; 58 59 /* 60 * CAN operational and error states 61 */ 62 enum can_state { 63 CAN_STATE_ERROR_ACTIVE = 0, /* RX/TX error count < 96 */ 64 CAN_STATE_ERROR_WARNING, /* RX/TX error count < 128 */ 65 CAN_STATE_ERROR_PASSIVE, /* RX/TX error count < 256 */ 66 CAN_STATE_BUS_OFF, /* RX/TX error count >= 256 */ 67 CAN_STATE_STOPPED, /* Device is stopped */ 68 CAN_STATE_SLEEPING, /* Device is sleeping */ 69 CAN_STATE_MAX 70 }; 71 72 /* 73 * CAN controller mode 74 */ 75 struct can_ctrlmode { 76 __u32 mask; 77 __u32 flags; 78 }; 79 80 #define CAN_CTRLMODE_LOOPBACK 0x1 /* Loopback mode */ 81 #define CAN_CTRLMODE_LISTENONLY 0x2 /* Listen-only mode */ 82 #define CAN_CTRLMODE_3_SAMPLES 0x4 /* Triple sampling mode */ 83 84 /* 85 * CAN device statistics 86 */ 87 struct can_device_stats { 88 __u32 bus_error; /* Bus errors */ 89 __u32 error_warning; /* Changes to error warning state */ 90 __u32 error_passive; /* Changes to error passive state */ 91 __u32 bus_off; /* Changes to bus off state */ 92 __u32 arbitration_lost; /* Arbitration lost errors */ 93 __u32 restarts; /* CAN controller re-starts */ 94 }; 95 96 /* 97 * CAN netlink interface 98 */ 99 enum { 100 IFLA_CAN_UNSPEC, 101 IFLA_CAN_BITTIMING, 102 IFLA_CAN_BITTIMING_CONST, 103 IFLA_CAN_CLOCK, 104 IFLA_CAN_STATE, 105 IFLA_CAN_CTRLMODE, 106 IFLA_CAN_RESTART_MS, 107 IFLA_CAN_RESTART, 108 __IFLA_CAN_MAX 109 }; 110 111 #define IFLA_CAN_MAX (__IFLA_CAN_MAX - 1) 112 113 #endif /* CAN_NETLINK_H */ 114