1 #ifndef __ASM_ARM_SYSTEM_H
2 #define __ASM_ARM_SYSTEM_H
3
4 #ifdef __KERNEL__
5
6
7 #define CPU_ARCH_UNKNOWN 0
8 #define CPU_ARCH_ARMv3 1
9 #define CPU_ARCH_ARMv4 2
10 #define CPU_ARCH_ARMv4T 3
11 #define CPU_ARCH_ARMv5 4
12 #define CPU_ARCH_ARMv5T 5
13 #define CPU_ARCH_ARMv5TE 6
14 #define CPU_ARCH_ARMv5TEJ 7
15 #define CPU_ARCH_ARMv6 8
16
17 /*
18 * CR1 bits (CP#15 CR1)
19 */
20 #define CR_M (1 << 0) /* MMU enable */
21 #define CR_A (1 << 1) /* Alignment abort enable */
22 #define CR_C (1 << 2) /* Dcache enable */
23 #define CR_W (1 << 3) /* Write buffer enable */
24 #define CR_P (1 << 4) /* 32-bit exception handler */
25 #define CR_D (1 << 5) /* 32-bit data address range */
26 #define CR_L (1 << 6) /* Implementation defined */
27 #define CR_B (1 << 7) /* Big endian */
28 #define CR_S (1 << 8) /* System MMU protection */
29 #define CR_R (1 << 9) /* ROM MMU protection */
30 #define CR_F (1 << 10) /* Implementation defined */
31 #define CR_Z (1 << 11) /* Implementation defined */
32 #define CR_I (1 << 12) /* Icache enable */
33 #define CR_V (1 << 13) /* Vectors relocated to 0xffff0000 */
34 #define CR_RR (1 << 14) /* Round Robin cache replacement */
35 #define CR_L4 (1 << 15) /* LDR pc can set T bit */
36 #define CR_DT (1 << 16)
37 #define CR_IT (1 << 18)
38 #define CR_ST (1 << 19)
39 #define CR_FI (1 << 21) /* Fast interrupt (lower latency mode) */
40 #define CR_U (1 << 22) /* Unaligned access operation */
41 #define CR_XP (1 << 23) /* Extended page tables */
42 #define CR_VE (1 << 24) /* Vectored interrupts */
43
44 #define CPUID_ID 0
45 #define CPUID_CACHETYPE 1
46 #define CPUID_TCM 2
47 #define CPUID_TLBTYPE 3
48
49 #define read_cpuid(reg) \
50 ({ \
51 unsigned int __val; \
52 asm("mrc p15, 0, %0, c0, c0, " __stringify(reg) \
53 : "=r" (__val) \
54 : \
55 : "cc"); \
56 __val; \
57 })
58
59 /*
60 * This is used to ensure the compiler did actually allocate the register we
61 * asked it for some inline assembly sequences. Apparently we can't trust
62 * the compiler from one version to another so a bit of paranoia won't hurt.
63 * This string is meant to be concatenated with the inline asm string and
64 * will cause compilation to stop on mismatch.
65 * (for details, see gcc PR 15089)
66 */
67 #define __asmeq(x, y) ".ifnc " x "," y " ; .err ; .endif\n\t"
68
69 #ifndef __ASSEMBLY__
70
71 #include <linux/linkage.h>
72
73 struct thread_info;
74 struct task_struct;
75
76 /* information about the system we're running on */
77 extern unsigned int system_rev;
78 extern unsigned int system_serial_low;
79 extern unsigned int system_serial_high;
80 extern unsigned int mem_fclk_21285;
81
82 struct pt_regs;
83
84 void die(const char *msg, struct pt_regs *regs, int err)
85 __attribute__((noreturn));
86
87 struct siginfo;
88 void notify_die(const char *str, struct pt_regs *regs, struct siginfo *info,
89 unsigned long err, unsigned long trap);
90
91 void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
92 struct pt_regs *),
93 int sig, const char *name);
94
95 #define xchg(ptr,x) \
96 ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
97
98 #define tas(ptr) (xchg((ptr),1))
99
100 extern asmlinkage void __backtrace(void);
101 extern asmlinkage void c_backtrace(unsigned long fp, int pmode);
102
103 struct mm_struct;
104 extern void show_pte(struct mm_struct *mm, unsigned long addr);
105 extern void __show_regs(struct pt_regs *);
106
107 extern int cpu_architecture(void);
108 extern void cpu_init(void);
109
110 void arm_machine_restart(char mode);
111 extern void (*arm_pm_restart)(char str);
112
113 /*
114 * Intel's XScale3 core supports some v6 features (supersections, L2)
115 * but advertises itself as v5 as it does not support the v6 ISA. For
116 * this reason, we need a way to explicitly test for this type of CPU.
117 */
118 #ifndef CONFIG_CPU_XSC3
119 #define cpu_is_xsc3() 0
120 #else
cpu_is_xsc3(void)121 static inline int cpu_is_xsc3(void)
122 {
123 extern unsigned int processor_id;
124
125 if ((processor_id & 0xffffe000) == 0x69056000)
126 return 1;
127
128 return 0;
129 }
130 #endif
131
132 #if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3)
133 #define cpu_is_xscale() 0
134 #else
135 #define cpu_is_xscale() 1
136 #endif
137
138 #define set_cr(x) \
139 __asm__ __volatile__( \
140 "mcr p15, 0, %0, c1, c0, 0 @ set CR" \
141 : : "r" (x) : "cc")
142
143 #define get_cr() \
144 ({ \
145 unsigned int __val; \
146 __asm__ __volatile__( \
147 "mrc p15, 0, %0, c1, c0, 0 @ get CR" \
148 : "=r" (__val) : : "cc"); \
149 __val; \
150 })
151
152 extern unsigned long cr_no_alignment; /* defined in entry-armv.S */
153 extern unsigned long cr_alignment; /* defined in entry-armv.S */
154
155 #define UDBG_UNDEFINED (1 << 0)
156 #define UDBG_SYSCALL (1 << 1)
157 #define UDBG_BADABORT (1 << 2)
158 #define UDBG_SEGV (1 << 3)
159 #define UDBG_BUS (1 << 4)
160
161 extern unsigned int user_debug;
162
163 #if __LINUX_ARM_ARCH__ >= 4
164 #define vectors_high() (cr_alignment & CR_V)
165 #else
166 #define vectors_high() (0)
167 #endif
168
169 #if __LINUX_ARM_ARCH__ >= 6
170 #define mb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
171 : : "r" (0) : "memory")
172 #else
173 #define mb() __asm__ __volatile__ ("" : : : "memory")
174 #endif
175 #define rmb() mb()
176 #define wmb() mb()
177 #define read_barrier_depends() do { } while(0)
178 #define set_mb(var, value) do { var = value; mb(); } while (0)
179 #define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
180
181 /*
182 * switch_mm() may do a full cache flush over the context switch,
183 * so enable interrupts over the context switch to avoid high
184 * latency.
185 */
186 #define __ARCH_WANT_INTERRUPTS_ON_CTXSW
187
188 /*
189 * switch_to(prev, next) should switch from task `prev' to `next'
190 * `prev' will never be the same as `next'. schedule() itself
191 * contains the memory barrier to tell GCC not to cache `current'.
192 */
193 extern struct task_struct *__switch_to(struct task_struct *, struct thread_info *, struct thread_info *);
194
195 #define switch_to(prev,next,last) \
196 do { \
197 last = __switch_to(prev,task_thread_info(prev), task_thread_info(next)); \
198 } while (0)
199
200 /*
201 * On SMP systems, when the scheduler does migration-cost autodetection,
202 * it needs a way to flush as much of the CPU's caches as possible.
203 *
204 * TODO: fill this in!
205 */
sched_cacheflush(void)206 static inline void sched_cacheflush(void)
207 {
208 }
209
210 /*
211 * CPU interrupt mask handling.
212 */
213 #if __LINUX_ARM_ARCH__ >= 6
214
215 #define local_irq_save(x) \
216 ({ \
217 __asm__ __volatile__( \
218 "mrs %0, cpsr @ local_irq_save\n" \
219 "cpsid i" \
220 : "=r" (x) : : "memory", "cc"); \
221 })
222
223 #define local_irq_enable() __asm__("cpsie i @ __sti" : : : "memory", "cc")
224 #define local_irq_disable() __asm__("cpsid i @ __cli" : : : "memory", "cc")
225 #define local_fiq_enable() __asm__("cpsie f @ __stf" : : : "memory", "cc")
226 #define local_fiq_disable() __asm__("cpsid f @ __clf" : : : "memory", "cc")
227
228 #else
229
230 /*
231 * Save the current interrupt enable state & disable IRQs
232 */
233 #define local_irq_save(x) \
234 ({ \
235 unsigned long temp; \
236 (void) (&temp == &x); \
237 __asm__ __volatile__( \
238 "mrs %0, cpsr @ local_irq_save\n" \
239 " orr %1, %0, #128\n" \
240 " msr cpsr_c, %1" \
241 : "=r" (x), "=r" (temp) \
242 : \
243 : "memory", "cc"); \
244 })
245
246 /*
247 * Enable IRQs
248 */
249 #define local_irq_enable() \
250 ({ \
251 unsigned long temp; \
252 __asm__ __volatile__( \
253 "mrs %0, cpsr @ local_irq_enable\n" \
254 " bic %0, %0, #128\n" \
255 " msr cpsr_c, %0" \
256 : "=r" (temp) \
257 : \
258 : "memory", "cc"); \
259 })
260
261 /*
262 * Disable IRQs
263 */
264 #define local_irq_disable() \
265 ({ \
266 unsigned long temp; \
267 __asm__ __volatile__( \
268 "mrs %0, cpsr @ local_irq_disable\n" \
269 " orr %0, %0, #128\n" \
270 " msr cpsr_c, %0" \
271 : "=r" (temp) \
272 : \
273 : "memory", "cc"); \
274 })
275
276 /*
277 * Enable FIQs
278 */
279 #define local_fiq_enable() \
280 ({ \
281 unsigned long temp; \
282 __asm__ __volatile__( \
283 "mrs %0, cpsr @ stf\n" \
284 " bic %0, %0, #64\n" \
285 " msr cpsr_c, %0" \
286 : "=r" (temp) \
287 : \
288 : "memory", "cc"); \
289 })
290
291 /*
292 * Disable FIQs
293 */
294 #define local_fiq_disable() \
295 ({ \
296 unsigned long temp; \
297 __asm__ __volatile__( \
298 "mrs %0, cpsr @ clf\n" \
299 " orr %0, %0, #64\n" \
300 " msr cpsr_c, %0" \
301 : "=r" (temp) \
302 : \
303 : "memory", "cc"); \
304 })
305
306 #endif
307
308 /*
309 * Save the current interrupt enable state.
310 */
311 #define local_save_flags(x) \
312 ({ \
313 __asm__ __volatile__( \
314 "mrs %0, cpsr @ local_save_flags" \
315 : "=r" (x) : : "memory", "cc"); \
316 })
317
318 /*
319 * restore saved IRQ & FIQ state
320 */
321 #define local_irq_restore(x) \
322 __asm__ __volatile__( \
323 "msr cpsr_c, %0 @ local_irq_restore\n" \
324 : \
325 : "r" (x) \
326 : "memory", "cc")
327
328 #define irqs_disabled() \
329 ({ \
330 unsigned long flags; \
331 local_save_flags(flags); \
332 (int)(flags & PSR_I_BIT); \
333 })
334
335 #ifdef CONFIG_SMP
336
337 #define smp_mb() mb()
338 #define smp_rmb() rmb()
339 #define smp_wmb() wmb()
340 #define smp_read_barrier_depends() read_barrier_depends()
341
342 #else
343
344 #define smp_mb() barrier()
345 #define smp_rmb() barrier()
346 #define smp_wmb() barrier()
347 #define smp_read_barrier_depends() do { } while(0)
348
349 #endif /* CONFIG_SMP */
350
351 #if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110)
352 /*
353 * On the StrongARM, "swp" is terminally broken since it bypasses the
354 * cache totally. This means that the cache becomes inconsistent, and,
355 * since we use normal loads/stores as well, this is really bad.
356 * Typically, this causes oopsen in filp_close, but could have other,
357 * more disasterous effects. There are two work-arounds:
358 * 1. Disable interrupts and emulate the atomic swap
359 * 2. Clean the cache, perform atomic swap, flush the cache
360 *
361 * We choose (1) since its the "easiest" to achieve here and is not
362 * dependent on the processor type.
363 *
364 * NOTE that this solution won't work on an SMP system, so explcitly
365 * forbid it here.
366 */
367 #define swp_is_buggy
368 #endif
369
__xchg(unsigned long x,volatile void * ptr,int size)370 static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
371 {
372 extern void __bad_xchg(volatile void *, int);
373 unsigned long ret;
374 #ifdef swp_is_buggy
375 unsigned long flags;
376 #endif
377 #if __LINUX_ARM_ARCH__ >= 6
378 unsigned int tmp;
379 #endif
380
381 switch (size) {
382 #if __LINUX_ARM_ARCH__ >= 6
383 case 1:
384 asm volatile("@ __xchg1\n"
385 "1: ldrexb %0, [%3]\n"
386 " strexb %1, %2, [%3]\n"
387 " teq %1, #0\n"
388 " bne 1b"
389 : "=&r" (ret), "=&r" (tmp)
390 : "r" (x), "r" (ptr)
391 : "memory", "cc");
392 break;
393 case 4:
394 asm volatile("@ __xchg4\n"
395 "1: ldrex %0, [%3]\n"
396 " strex %1, %2, [%3]\n"
397 " teq %1, #0\n"
398 " bne 1b"
399 : "=&r" (ret), "=&r" (tmp)
400 : "r" (x), "r" (ptr)
401 : "memory", "cc");
402 break;
403 #elif defined(swp_is_buggy)
404 #ifdef CONFIG_SMP
405 #error SMP is not supported on this platform
406 #endif
407 case 1:
408 local_irq_save(flags);
409 ret = *(volatile unsigned char *)ptr;
410 *(volatile unsigned char *)ptr = x;
411 local_irq_restore(flags);
412 break;
413
414 case 4:
415 local_irq_save(flags);
416 ret = *(volatile unsigned long *)ptr;
417 *(volatile unsigned long *)ptr = x;
418 local_irq_restore(flags);
419 break;
420 #else
421 case 1:
422 asm volatile("@ __xchg1\n"
423 " swpb %0, %1, [%2]"
424 : "=&r" (ret)
425 : "r" (x), "r" (ptr)
426 : "memory", "cc");
427 break;
428 case 4:
429 asm volatile("@ __xchg4\n"
430 " swp %0, %1, [%2]"
431 : "=&r" (ret)
432 : "r" (x), "r" (ptr)
433 : "memory", "cc");
434 break;
435 #endif
436 default:
437 __bad_xchg(ptr, size), ret = 0;
438 break;
439 }
440
441 return ret;
442 }
443
444 extern void disable_hlt(void);
445 extern void enable_hlt(void);
446
447 #endif /* __ASSEMBLY__ */
448
449 #define arch_align_stack(x) (x)
450
451 #endif /* __KERNEL__ */
452
453 #endif
454