page.title=Android Supported Media Formats @jd:body

In this document

  1. Network Protocols
  2. Core Media Formats
  3. Video Encoding Recommendations

See also

  1. Multimedia and Camera

Key classes

  1. {@link android.media.MediaPlayer MediaPlayer}
  2. {@link android.media.MediaRecorder MediaRecorder}

This document describes the media codec, container, and network protocol support provided by the Android platform.

As an application developer, you are free to make use of any media codec that is available on any Android-powered device, including those provided by the Android platform and those that are device-specific. However, it is a best practice to use media encoding profiles that are device-agnostic.

Network Protocols

The following network protocols are supported for audio and video playback:

Note: HTTPS is not supported before Android 3.1.

Core Media Formats

The table below describes the media format support built into the Android platform. Note that any given mobile device may provide support for additional formats or file types not listed in the table.

Note: Media codecs that are not guaranteed to be available on all Android platform versions are accordingly noted in parentheses—for example "(Android 3.0+)".

Table 1. Core media format and codec support.

Type Format / Codec Encoder Decoder Details Supported File Type(s) / Container Formats
Audio AAC LC/LTP Mono/Stereo content in any combination of standard bit rates up to 160 kbps and sampling rates from 8 to 48kHz • 3GPP (.3gp)
• MPEG-4 (.mp4, .m4a)
• ADTS raw AAC (.aac, decode in Android 3.1+, encode in Android 4.0+, ADIF not supported)
• MPEG-TS (.ts, not seekable, Android 3.0+)
HE-AACv1 (AAC+)  
HE-AACv2 (enhanced AAC+)  
AMR-NB 4.75 to 12.2 kbps sampled @ 8kHz 3GPP (.3gp)
AMR-WB 9 rates from 6.60 kbit/s to 23.85 kbit/s sampled @ 16kHz 3GPP (.3gp)
FLAC  
(Android 3.1+)
Mono/Stereo (no multichannel). Sample rates up to 48 kHz (but up to 44.1 kHz is recommended on devices with 44.1 kHz output, as the 48 to 44.1 kHz downsampler does not include a low-pass filter). 16-bit recommended; no dither applied for 24-bit. FLAC (.flac) only
MP3   Mono/Stereo 8-320Kbps constant (CBR) or variable bit-rate (VBR) MP3 (.mp3)
MIDI   MIDI Type 0 and 1. DLS Version 1 and 2. XMF and Mobile XMF. Support for ringtone formats RTTTL/RTX, OTA, and iMelody • Type 0 and 1 (.mid, .xmf, .mxmf)
• RTTTL/RTX (.rtttl, .rtx)
• OTA (.ota)
• iMelody (.imy)
Vorbis     • Ogg (.ogg)
• Matroska (.mkv, Android 4.0+)
PCM/WAVE   8- and 16-bit linear PCM (rates up to limit of hardware) WAVE (.wav)
Image JPEG Base+progressive JPEG (.jpg)
GIF     GIF (.gif)
PNG   PNG (.png)
BMP     BMP (.bmp)
WEBP
(Android 4.0+)

(Android 4.0+)
  WebP (.webp)
Video H.263   • 3GPP (.3gp)
• MPEG-4 (.mp4)
H.264 AVC
(Android 3.0+)
Baseline Profile (BP) • 3GPP (.3gp)
• MPEG-4 (.mp4)
• MPEG-TS (.ts, AAC audio only, not seekable, Android 3.0+)
MPEG-4 SP     3GPP (.3gp)
VP8  
(Android 2.3.3+)
Streamable only in Android 4.0 and above WebM (.webm)
• Matroska (.mkv, Android 4.0+)

Video Encoding Recommendations

Table 2, below, lists examples of video encoding profiles and parameters that the Android media framework supports for playback. In addition to these encoding parameter recommendations, a device's available video recording profiles can be used as a proxy for media playback capabilities. These profiles can be inspected using the {@link android.media.CamcorderProfile CamcorderProfile} class, which is available since API level 8.

Table 2. Examples of supported video encoding parameters.

  SD (Low quality) SD (High quality) HD (Not available on all devices)
Video codec H.264 Baseline Profile H.264 Baseline Profile H.264 Baseline Profile
Video resolution 176 x 144 px 480 x 360 px 1280 x 720 px
Video frame rate 12 fps 30 fps 30 fps
Video bitrate 56 Kbps 500 Kbps 2 Mbps
Audio codec AAC-LC AAC-LC AAC-LC
Audio channels 1 (mono) 2 (stereo) 2 (stereo)
Audio bitrate 24 Kbps 128 Kbps 192 Kbps

For video content that is streamed over HTTP or RTSP, there are additional requirements: