Lines Matching refs:added
11 * bsd: Cleaned up driver wrapper and added various low-level
19 * wpa_cli: added option for using a separate process to receive event
57 * nl80211: added support for IBSS networks
58 * added internal debugging mechanism with backtrace support and memory
60 * added WPS ER unsubscription command to more cleanly unregister from
64 * added BSS table to maintain more complete scan result information
80 * added support for multiple SSIDs per scan request to optimize
84 * added support for WPS USBA out-of-band mechanism with USB Flash
90 * added better support for drivers that allow separate authentication
98 * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
102 * wpa_gui-qt4: added new Peers dialog to show information about peers
104 * added support for WPS External Registrar functionality (configure APs
113 * fixed number of small WPS issues and added workarounds to
115 * added support for NFC out-of-band mechanism with WPS
118 * added preliminary support for IEEE 802.11r RIC processing
119 * added support for specifying subset of enabled frequencies to scan
124 * added a workaround for race condition between receiving the
126 * added background scan and roaming infrastructure to allow
129 * added new DBus interface (fi.w1.wpa_supplicant1)
132 * added support for Wi-Fi Protected Setup (WPS)
141 * added support for EAP-AKA' (draft-arkko-eap-aka-kdf)
142 * added support for using driver_test over UDP socket
147 * added a Windows installer that includes WinPcap and all the needed
154 * added Milenage SIM/USIM emulator for EAP-SIM/EAP-AKA
158 * added a new network configuration option, wpa_ptk_rekey, that can be
161 * added an optional mitigation mechanism for certain attacks against
174 * added support (Linux only) for RoboSwitch chipsets (often found in
181 * added support for SHA-256 as X.509 certificate digest when using the
184 * added support for using SHA256-based stronger key derivation for WPA2
188 * added support for configuring Phase 2 (inner/tunneled) authentication
192 * added support for EAP Sequences in EAP-FAST Phase 2
193 * added support for using TNC with EAP-FAST
194 * added driver_ps3 for the PS3 Linux wireless driver
195 * added support for optional cryptobinding with PEAPv0
198 * added fragmentation support for EAP-TNC
199 * added support for parsing PKCS #8 formatted private keys into the
202 * added option of using faster, but larger, routines in the internal
218 * removed '-w' command line parameter (wait for interface to be added,
221 when an interface is added
223 * added ctrl_iface monitor event (CTRL-EVENT-SCAN-RESULTS) for
225 * added new ctrl_iface command, BSS, to allow scan results to be
235 * added support for Makefile builds to include debug-log-to-a-file
239 * added data structure for storing allocated buffers (struct wpabuf);
243 * added support for protecting EAP-AKA/Identity messages with
245 * added support for protected result indication with AT_RESULT_IND for
247 * added driver_wext workaround for race condition between scanning and
257 * added support for privilege separation (run only minimal part of
275 * added support for EAP-IKEv2 (draft-tschofenig-eap-ikev2-15.txt);
279 * added support for configuring password as NtPasswordHash
281 * added support for fallback from abbreviated TLS handshake to
286 * added support for drivers that take care of RSN 4-way handshake
289 * added an experimental port for Mac OS X (CONFIG_DRIVER_OSX=y in
302 * added support for processing TNCC-TNCS-Messages to report
306 * added network configuration parameter 'frequency' for setting
308 * added experimental IEEE 802.11r/D6.0 support
317 * added support for fragmentation of outer TLS packets during Phase 2
320 * added support for EAP-FAST authentication with inner methods that
323 * added support for authenticated EAP-FAST provisioning
324 * added support for configuring maximum number of EAP-FAST PACs to
326 * added support for storing EAP-FAST PACs in binary format
332 added support for EAP-FAST
341 * added support for EAP-TNC (Trusted Network Connect)
347 * added experimental, integrated TLSv1 client implementation with the
354 of it was already required; TLSv1/X.509/ASN.1/RSA added about 25 kB)
359 * added preliminary implementation of IEEE 802.11w/D1.0 (management
369 * added support for reading 3G USIM AID from EF_DIR to allow EAP-AKA to
372 * added support for matching the subjectAltName of the authentication
383 * added support for building Windows version with UNICODE defined
388 * driver_ndis: added validation for IELength value in scan results to
396 * added an alternative control interface backend for Windows targets:
407 * added support for controlling more than one interface per process in
409 * added a workaround for a case where the AP is using unknown address
415 * added a workaround for UDP-based control interface (which was used in
430 * winsvc: added support for configuring ctrl_interface parameters in
440 * added support for doing MLME (IEEE 802.11 management frame
443 * added a new network block configuration option, fragment_size, to
449 * added an experimental TLSv1 client implementation
455 * added PeerKey handshake implementation for IEEE 802.11e
460 * added new configuration option for identifying which network block
473 * added support for EAP Generalized Pre-Shared Key (EAP-GPSK,
475 * added Microsoft Visual Studio 2005 solution and project files for
479 at the end of RSN pre-authentication and added unregistration of
482 * driver_ndis: added support for selecting AP based on BSSID
483 * added new environmental variable for wpa_cli action scripts:
485 * driver_ndis: added support for using NDISUIO instead of WinPcap for
512 * config_winreg: added support for saving configuration data into
514 * added support for controlling network device operational state
518 * driver_wext: added support for WE-21 change to SSID configuration
521 * added an optional driver_ops callback for MLME-SETPROTECTION.request
523 * added support for EAP-SAKE (no EAP method number allocated yet, so
525 * added support for dynamically loading EAP methods (.so files) instead
535 * added support for generating EAP Expanded Nak
539 * added support for receiving EAPOL frames from a Linux bridge
549 * driver_wext: added fallback to use SIOCSIWENCODE for setting auth_alg
553 * driver_test: added better support for multiple APs and STAs by using
556 * added support for EAP expanded type (vendor specific EAP methods)
557 * added AP_SCAN command into ctrl_iface so that ap_scan configuration
578 * added experimental STAKey handshake implementation for IEEE 802.11e
594 * added support for using Windows registry for command line parameters
604 * added better support for multiple control interface backends
611 * added new event loop implementation for Windows using
615 * added support for selecting l2_packet implementation in .config
618 * added new l2_packet implementation for WinPcap
622 * added support for EAP-FAST key derivation using other ciphers than
624 * added support for configuring CA certificate as DER file and as a
626 * fixed private key configuration as configuration blob and added
628 * tls_gnutls: added support for using PKCS#12 files; added support for
630 * added support for loading trusted CA certificates from Windows
633 * added C version of ndis_events.cpp and made it possible to build this
636 * added wpasvc.exe into Windows binary release; this is an alternative
663 * driver_madwifi: added support for madwifi-ng
665 * wpa_gui: added CA certificate configuration
675 * added support for named configuration blobs in order to avoid having
684 * added ca_path (and ca_path2) configuration variables that can be used
687 * added support for starting wpa_supplicant without a configuration
692 * added global control interface that can be optionally used for adding
698 - added WEP key configuration
699 - added possibility to edit the current network configuration
702 * added simple configuration file examples (in examples subdirectory)
710 * added a workaround for clearing keys with ndiswrapper to allow
712 * added docbook documentation (doc/docbook) that can be used to
722 header is added only when transmitted the frame; this makes it easier
732 * added support for multiple configuration backends (CONFIG_BACKEND
735 * added support for updating configuration ('wpa_cli save_config');
739 * added GET_NETWORK ctrl_iface command
748 * added support for using Windows certificate store (through CryptoAPI)
753 * added Qt4 version of wpa_gui (wpa_gui-qt4 directory); this can be
758 * added support for enabling/disabling networks from the list of all
761 * added support for adding and removing network from the current
763 <network id>'); added networks are disabled by default and they can
767 * added support for setting network configuration parameters through
772 * added EAP workaround for PEAP session resumption: allow outer,
778 * wpa_gui: added preliminary support for adding new networks to the
795 * added support for using ap_scan=2 mode with multiple network blocks;
802 * added support for matching alternative subject name extensions of the
805 * driver_ndis: added support for IEEE 802.1X authentication with wired
807 * added support for querying private key password (EAP-TLS) through the
815 * added support for using password with EAP-PAX (as an alternative to
818 * added support for arbitrary driver interface parameters through the
821 * added possibility to override l2_packet module with driver interface
826 * driver_test: added support for testing hostapd with wpa_supplicant
834 * driver_madwifi: added preliminary support for compiling against 'BSD'
836 * added support for EAP-MSCHAPv2 password retries within the same EAP
838 * added support for password changes with EAP-MSCHAPv2 (used when the
840 * added support for reading additional certificates from PKCS#12 files
848 * added GUI version of wpa_cli, wpa_gui; this is not build
851 * added 'disconnect' command to control interface for setting
854 * added support for selecting a network from the list of all configured
857 * added support for getting scan results through control interface
858 * added EAP workaround for PEAPv1 session resumption: allow outer,
863 * added a new build time option, CONFIG_NO_STDOUT_DEBUG, that can be
869 * added support for wired authentication (IEEE 802.1X on wired
879 * added support for sending TLS alerts
880 * added support for 'any' SSID wildcard; if ssid is not configured or
882 * added support for asking PIN (for SIM) from frontends (e.g.,
886 * added support for using external devices (e.g., a smartcard) for
891 * added experimental support for EAP-PAX
892 * added monitor mode for wpa_cli (-a<path to a program to run>) that
900 * added support for opportunistic WPA2 PMKSA key caching (disabled by
905 * added -P<pid file> argument for wpa_supplicant to write the current
909 * added new phase1 option parameter, include_tls_length=1, to force
931 * added a workaround for an interoperability issue with a Cisco AP
942 * added support for blacklisting APs that fail or timeout
952 * added preliminary support for IBSS (ad-hoc) mode configuration
960 * added preliminary port for native Windows (i.e., no cygwin) using
964 * added optional support for GNU Readline and History Libraries for
969 * added couple of workarounds for interoperability issues with a
971 * added support for EAP-FAST (draft-cam-winget-eap-fast-00.txt);
981 * added support for PMKSA caching with drivers that generate RSN IEs
983 but similar code can be easily added to driver_ndiswrapper.c once
987 * driver_ndis: added support for NDIS NdisMIncidateStatus() events
991 * added support for driver interfaces to replace the interface name
995 * added support for CR+LF (Windows-style) line ends in configuration
1004 * added support for driver events to add PMKID candidates in order to
1008 * added KEY_MGMT_802_1X_NO_WPA as a new key_mgmt type so that driver
1014 * driver_ndis: added legacy WPA capability detection for non-WPA2
1016 * added support for setting static WEP keys for IEEE 802.1X without
1020 * added support for reading PKCS#12 (PFX) files (as a replacement for
1023 * added new ap_scan mode, ap_scan=2, for drivers that take care of
1031 * added experimental port of wpa_supplicant for Windows
1039 * added auth_alg to driver interface associate() parameters to make it
1044 * driver_broadcom: added new driver interface for Broadcom wl.o driver
1051 * PEAPv1: added support for terminating PEAP authentication on tunneled
1060 * added support for EAP-PSK (draft-bersani-eap-psk-03.txt)
1062 * added support for configuring list of allowed Phase 2 EAP types
1064 * added support for configuring IEEE 802.11 authentication algorithm
1067 * added support for EAP-AKA (with UMTS SIM)
1070 * added support for EAP-SIM pseudonyms and fast re-authentication
1071 * added support for EAP-TLS/PEAP/TTLS fast re-authentication (TLS
1073 * added support for EAP-SIM with two challanges
1075 * added support for configuring DH/DSA parameters for an ephemeral DH
1079 * added support for matching subject of the authentication server
1087 * added driver interface for Intel ipw2100 driver
1088 * added support for LEAP with WPA
1089 * added support for larger scan results report (old limit was 4 kB of
1100 * added support for timestamping debug log messages (disabled by
1118 * added support for controlling multiple interfaces (radios) per
1122 * added a workaround for EAP servers that incorrectly use same Id for
1133 * added support for FreeBSD and driver interface for the BSD net80211
1148 * added a new driver interface, 'wext', which uses only standard,
1153 * added support for mode in which the driver is responsible for AP
1161 * added support for new EAP authentication methods:
1163 * added support for asking one-time-passwords from frontends (e.g.,
1187 * added support for LEAP
1188 * added driver interface for Linux ndiswrapper
1189 * added priority option for network blocks in the configuration file;
1203 * added support for madwifi driver (Atheros ar521x)
1204 * added a workaround for cases where AP sets Install Tx/Rx bit for
1208 * added GSM SIM/USIM interface for GSM authentication algorithm for
1210 * added support for ATMEL AT76C5XXx driver
1214 * added support for using plaintext and static WEP networks
1218 * added support for new EAP authentication methods:
1232 * added support for anonymous identity (to be used when identity is
1235 * added event messages from wpa_supplicant to frontends, e.g., wpa_cli
1236 * added support for requesting identity and password information using
1253 * added support for internal IEEE 802.1X (actually, IEEE 802.1aa/D6.1)
1274 * added support for non-WPA IEEE 802.1X mode with dynamic WEP keys
1277 * added support for IEEE 802.11i/RSN (WPA2)
1284 * added interface for external programs (frontends) to control