Lines Matching refs:peer

100 Flush P2P peer table and state.
104 p2p_prov_disc <peer device address> <display|keypad|pbc> [join]
106 Send P2P provision discovery request to the specified peer. The
107 parameters for this command are the P2P device address of the peer and
109 02:01:02:03:04:05 display" would request the peer to display a PIN for
110 us and "p2p_prov_disc 02:01:02:03:04:05 keypad" would request the peer
117 p2p_connect <peer device address> <pbc|pin|PIN#> [display|keypad]
120 Start P2P group formation with a discovered P2P peer. This includes
130 from local display, keypad=PIN entered from peer display). "persistent"
138 "auth" indicates that the WPS parameters are authorized for the peer
139 device without actually starting GO Negotiation (i.e., the peer is
152 negotiation with a specific peer). This is also known as autonomous
159 p2p_reject <peer device address>
161 Reject connection attempt from a peer (specified with a device
163 a peer and request to automatically block any further connection or
164 discovery of the peer.
181 command are the device address of the peer device (or 00:00:00:00:00:00
182 for wildcard query that is sent to every discovered P2P peer that
194 multiple pending peer device specific queries (each will be sent in
195 sequence whenever the peer is found).
199 will be automatically removed when the specified peer has replied to
320 p2p_invite [persistent=<network id>|group=<group ifname>] [peer=address]
323 Invite a peer to join a group (e.g., group=wlan1) or to reinvoke a
324 persistent group (e.g., persistent=4). If the peer device is the GO of
325 the persisten group, the peer parameter is not needed. Otherwise it is
486 Fetch information about a known P2P peer.