==================================================================== 14 October 2011 Protocols 1 through 3 supported Memcheck only. Protocol 4 provides XML output for Memcheck, Helgrind, DRD and SGcheck. Technically there are four variants of Protocol 4, one for each tool, since they produce different errors. The four variants differ only in the definition of the ERROR nonterminal and are otherwise identical. NOTE that Protocol 4 (for the current svn trunk, which will eventually become 3.7.x) is still under development. The text herein should not be regarded as the final definition. Identification of Protocols ~~~~~~~~~~~~~~~~~~~~~~~~~~~ In Protocols 1 through 3, a INT close to the start of the stream makes it possible for parsers to ascertain the version, so they can tell whether or not they can handle it. The presence of support for multiple tools brings a complication, though: it is not enough merely to state the protocol version -- the tool name must also be stated. Hence in Protocol 4, the INT is followed immediately by TEXT, to identify the tool. This duplicates the tool name present later in the preamble, but it was felt important to place the tool name right at the front along with the protocol number, for easy determination of parseability. How this specification is structured ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The TOPLEVEL nonterminal specifies top level XML output structure. It is common to all error producing tools. TOPLEVEL references TOOLSPECIFICs for each tool, and these are defined differently for each tool. Each TOOLSPECIFIC is an error, which is tool-specific. For Helgrind and DRD, a TOOLSPECIFIC may also contain a so-called thread-announcement record (described below). Overall there is a very high degree of format commonality between the three tools. Once a GUI is able to display the output correctly for one tool, it should be easy to extend it for the other two. Protocol 4 changes for Memcheck ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Protocol 4 for Memcheck is similar to Protocol 3, but has a number of changes to make it fit in the common framework: - the SUPPCOUNTS nonterminal now appears after the "Zero or more ERRORs" block, and not before it. - the abovementioned "Zero or more ERRORs" block now becomes "Zero or more of (either ERROR or ERRORCOUNTS)". - ERRORs for Memcheck may contain a SUPPRESSION field, which gives the corresponding suppression for it. - ERRORs for Memcheck now use the XWHAT and XAUXWHAT nonterminals, as well as WHAT and XWHAT. - The ad-hoc blocks and used by Memcheck have been moved inside the XWHAT for the relevant error kinds. This facilitates a common definition of ERROR across all three tools. The first two changes are required in order to correct a longstanding design flaw in the way Memcheck interacts with Valgrind's error management mechanism. See bug #186790 (https://bugs.kde.org/show_bug.cgi?id=186790). The third change was requested in #191189 (https://bugs.kde.org/show_bug.cgi?id=191189). For GUI authors upgrading from Protocol 3 or earlier, the most significant new concept to grasp is the relationship between WHAT and XWHAT, and between AUXWHAT and XAUXWHAT. The definition of Protocol 4 now follows. It is structured similarly to that of the previous protocols, except that there is a separate definition of a nonterminal called TOOLSPECIFIC for each of Memcheck, Helgrind, DRD and SGcheck. The XWHAT and XAUXWHAT nonterminals also have tool-specific components. Apart from that, the structure is common to all supported tools. ==================================================================== TOPLEVEL -------- The first line output is always this: All remaining output is contained within the tag-pair . Inside that, the first entity is an indication of the protocol version. This is provided so that existing parsers can identify XML created by future versions of Valgrind merely by observing that the protocol version is one they don't understand. Hence TOPLEVEL is: INT TEXT PROTOCOL Valgrind versions 3.0.0 and 3.0.1 emit protocol version 1. Versions 3.1.X and 3.2.X [and 3.3.X ??] emit protocol version 2. 3.4.X emits protocol version 3. 3.5.X emits version 4. The TEXT in is either "memcheck", "helgrind", "drd" or "exp-ptrcheck" and determines the allowed format of the ERROR nonterminal. Note that is only present when the protocol version is 4 or above. PROTOCOL for version 4 ---------------------- This is the main top-level construction. Roughly speaking, it contains a preamble, a program-started marker, the errors from the run of the program, a program-ended marker, and any further errors resulting from post-run analysis (eg, memory leak detection). Hence the following in sequence: * Various preamble lines which give version info for the various components. The text in them can be anything; it is not intended for interpretation by the GUI: Misc version/copyright text (zero or more of) * The PID of this process and of its parent: INT INT * The name of the tool being used: TEXT This can be anything, and it doesn't have to match the entry, although that might be wise. * Zero or more bindings of environment variable names to actual values. These describe precisely the instantiations of %q format specifiers used in the --xml-file= argument for the run, if any. There is one entry for each %q expanded: VAR $VAR * OPTIONALLY, if --xml-user-comment=STRING was given: STRING STRING is not escaped in any way, so that it itself may be a piece of XML with arbitrary tags etc. * The program and args: first those pertaining to Valgrind itself, and then those pertaining to the program to be run under Valgrind (the client): TEXT TEXT (zero or more of) TEXT TEXT (zero or more of) * The following, indicating that the program has now started: RUNNING The format of this string is not defined, but it is expected to be human-understandable. In current Valgrind versions it is the elapsed wallclock time since process start. * Zero or more of (either ERRORCOUNTS or TOOLSPECIFIC). * The following, indicating that the program has now finished, and that the any final wrapup (eg, for Memcheck, leak checking) is happening. FINISHED * Zero or more of (either ERRORCOUNTS or TOOLSPECIFIC). In Memcheck's case these will be complaints from the leak checker. For SGcheck and Helgrind we don't expect any output here (but the spec does not guarantee that either). * SUPPCOUNTS, indicating how many times each suppression was used. That's it. The tool-specific definitions for TOOLSPECIFIC are below; however let's first continue with some smaller nonterminals used in the construction of errors for all the tool types. ==================================================================== Nonterminals used in construction of ERRORs ------------------------------------------- STACK ----- STACK indicates locations in the program being debugged. A STACK is one or more FRAMEs. The first is the innermost frame, the next its caller, etc. one or more FRAME FRAME ----- FRAME records a single program location: HEX64 optionally TEXT optionally TEXT optionally TEXT optionally TEXT optionally INT Only the field is guaranteed to be present. It indicates a code ("instruction pointer") address. The optional fields, if present, appear in the order stated: * obj: gives the name of the ELF object containing the code address * fn: gives the name of the function containing the code address * dir: gives the source directory associated with the name specified by . Note the current implementation often does not put anything useful in this field. * file: gives the name of the source file containing the code address * line: gives the line number in the source file ERRORCOUNTS ----------- This specifies, for each error that has been so far presented, the number of occurrences of that error. zero or more of INT HEX64 Each gives the current error count for the error with unique tag . The counts do not have to give a count for each error so far presented - partial information is allowable. As at Valgrind rev 3793, error counts are only emitted at program termination. However, it is perfectly acceptable to periodically emit error counts as the program is running. Doing so would facilitate a GUI to dynamically update its error-count display as the program runs. SUPPCOUNTS ---------- A SUPPCOUNTS block appears exactly once, after the program terminates. It specifies the number of times each error-suppression was used. Suppressions not mentioned were used zero times. zero or more of INT TEXT The is as specified in the suppression name fields in .supp files. SUPPRESSION ----------- These are optionally emitted as part of ERRORs, and specify the suppression that would be needed to suppress the containing error. For convenience, the suppression is presented twice, once in a structured nicely wrapped up in tags, and once as raw text suitable for direct copying and pasting into a suppressions file. TEXT name of the suppression TEXT kind, eg "Memcheck:Param" TEXT (optional) aux kind, eg "write(buf)" SFRAME (one or more) frames CDATAS where CDATAS is a sequence of one or more blocks holding the raw text. Unfortunately, CDATA provides no way to escape the ending marker "]]>", which means that if the raw data contains such a sequence, it has to be split between two CDATA blocks, one ending with data "]]" and the other beginning with data "<". This is why the spec calls for one or more CDATA blocks rather than exactly one. Note that, so far, we cannot envisage a circumstance in which a generated suppression would contain the string "]]>", since neither "]" nor ">" appear to turn up in mangled symbol names. Hence it is not envisaged that there will ever be more than one CDATA block, and indeed the implementation as of Valgrind 3.5.0 will only ever generate one block (it ignores any possible escaping problems). Nevertheless the specification allows multiple blocks, as a matter of safety. SFRAME ------ Either TEXT eg denoting "obj:/usr/X11R6/lib*/libX11.so.6.2", or TEXT eg denoting "fun:*libc_write" WHAT and XWHAT -------------- WHAT supplies a single line of text, which is a human-understandable, primary description of an error. XWHAT is an extended version of WHAT. It also contains a piece of text intended for human reading, but in addition may contain arbitrary other tagged data. This extra data is tool-specific. One of its purposes is to supply GUIs with links to other data in the sequence of TOOLSPECIFICs, that are associated with the error. Another purpose is wrap certain quantities (numbers, file names, etc) embedded in the message, so that the GUIs can get hold of them without having to parse the text itself. For example, we could get: Possible data race on address 0x12345678 or alternatively Possible data race by thread #17 on address 0x12345678 17 And presumably the 17 refers to some previously emitted entity in the stream of TOOLSPECIFICs for this tool. In an XWHAT, the tag-pair is mandatory. GUIs which don't want to handle the extra fields can just ignore them and display the text part. In this way they have the option to present at least something useful to the user even in the case where the extra fields can't be handled, for whatever reason. A corollary of this is that the degenerate extended case T is exactly equivalent to T AUXWHAT and XAUXWHAT -------------------- AUXWHAT is exactly like WHAT: a single line of text. It provides additional, secondary description of an error, that should be shown to the user. XAUXWHAT relates to AUXWHAT in the same way XWHAT relates to WHAT: it wraps up extra tagged info along with the line of text that would be in the AUXWHAT. ==================================================================== ERROR definition -- common structure ------------------------------------ ERROR defines an error, and is the most complex nonterminal. For all of the tools, the structure is common, and always conforms to the following: HEX64 INT KIND (either WHAT or XWHAT) optionally: (either WHAT or XWHAT) STACK zero or more: (either AUXWHAT or XAUXWHAT or STACK) optionally: SUPPRESSION * Each error contains a unique, arbitrary 64-bit hex number. This is used to refer to the error in ERRORCOUNTS nonterminals (see above). * The tag indicates the Valgrind thread number. This value is arbitrary but may be used to determine which threads produced which errors (at least, the first instance of each error). * The tag specifies one of a small number of fixed error types, so that GUIs may roughly categorise errors by type if they want. The tags themselves are tool-specific and are defined further below, for each tool. * The "(either WHAT or XWHAT)" gives a primary description of the error. WHAT and XWHAT are defined earlier in this file. Any XWHATs appearing here may contain tool-specific subcomponents. * Optionally, a second line of primary description may be present. * A STACK gives the primary source location for the error. * There then follow zero or more of "(either AUXWHAT or XAUXWHAT or STACK)". These give further (auxiliary) information about the error, possibly including stack traces. They should be shown to the user in the order they appear. AUXWHAT and XAUXWHAT are defined earlier in this file. Any XAUXWHATs appearing here may contain tool-specific subcomponents. * Optionally, as the last field, a SUPPRESSION may be provided. This contains a suppression that would hide the error. ==================================================================== TOOLSPECIFIC definition for Memcheck ------------------------------------ For Memcheck, a TOOLSPECIFIC is simply an ERROR: TOOLSPECIFIC = ERROR ERROR details for Memcheck -------------------------- XWHATs (for definition, see above) may contain the following extra components (along with the mandatory ... component): * INT * INT These fields are used in errors that have a tag specifying a KIND of the form "Leak_*", to indicate the number of leaked bytes and blocks. XAUXWHATs (for definition, see above) may contain the following extra components (along with the mandatory ... component): * TEXT, as defined in FRAME * INT, as defined in FRAME * TEXT, as defined in FRAME KIND for Memcheck ----------------- This is a small enumeration indicating roughly the nature of an error. The possible values are: InvalidFree free/delete/delete[] on an invalid pointer MismatchedFree free/delete/delete[] does not match allocation function (eg doing new[] then free on the result) InvalidRead read of an invalid address InvalidWrite write of an invalid address InvalidJump jump to an invalid address Overlap args overlap other otherwise bogus in eg memcpy InvalidMemPool invalid mem pool specified in client request UninitCondition conditional jump/move depends on undefined value UninitValue other use of undefined value (primarily memory addresses) SyscallParam system call params are undefined or point to undefined/unaddressible memory ClientCheck "error" resulting from a client check request Leak_DefinitelyLost memory leak; the referenced blocks are definitely lost Leak_IndirectlyLost memory leak; the referenced blocks are lost because all pointers to them are also in leaked blocks Leak_PossiblyLost memory leak; only interior pointers to referenced blocks were found Leak_StillReachable memory leak; pointers to un-freed blocks are still available ==================================================================== TOOLSPECIFIC definition for SGcheck ----------------------------------- For SGcheck, a TOOLSPECIFIC is simply an ERROR: TOOLSPECIFIC = ERROR ERROR details for SGcheck ------------------------- SGcheck does not produce any XWHAT records, despite the fact that "ERROR definition -- common structure" says that tools may do so. XAUXWHATs (for definition, see above) may contain the following extra components (along with the mandatory ... component): * TEXT, as defined in FRAME * INT, as defined in FRAME * TEXT, as defined in FRAME KIND for SGcheck ---------------- This is a small enumeration indicating roughly the nature of an error. The possible values are: SorG Stack or global array inconsistency (roughly speaking, an overrun of a stack or global array). The blocks give further details. ==================================================================== TOOLSPECIFIC definition for Helgrind ------------------------------------- For Helgrind, a TOOLSPECIFIC may be one of two things: TOOLSPECIFIC = either ERROR or ANNOUNCETHREAD ANNOUNCETHREAD -------------- The definition is INT STACK This states the creation point of a thread, and gives it a unique "hthreadid", which may be referred to in subsequent ERRORs. Note that 1. The appearance of ANNOUNCETHREAD does not mean that the thread was actually created at that point relative to any preceding or following ERRORs in the output stream -- in general the thread will have been created arbitrarily earlier. Helgrind only "announces" a thread when it needs to refer to it for the first time, in a subsequent ERROR. 2. The "hthreadid" is a number which uniquely identifies the thread for the run - no other thread will have the same hthreadid. The hthreadid is a Helgrind-specific piece of information and is unrelated to the fields in the common part of an ERROR. Be careful not to confuse the two. ERROR details for Helgrind -------------------------- XWHATs (for definition, see above) may contain the following extra components (along with the mandatory ... component): * INT fields. These refer to ANNOUNCETHREADs appearing previously in the scheme, and state the creation points of the thread(s) concerned in the ERROR. Hence it should be possible for GUIs to show users stacks of the creation points of all threads involved in each ERROR. XAUXWHATs (for definition, see above) may contain the following extra components (along with the mandatory ... component): * INT, same meaning as when referred to in XWHAT * TEXT, as defined in FRAME * INT, as defined in FRAME * TEXT, as defined in FRAME KIND for Helgrind ----------------- This is a small enumeration indicating roughly the nature of an error. The possible values are: Race Data race. Helgrind will try to show the stacks for both conflicting accesses if it can; it will always show the stack for at least one of them. UnlockUnlocked Unlocking a not-locked lock UnlockForeign Unlocking a lock held by some other thread UnlockBogus Unlocking an address which is not known to be a lock PthAPIerror One of the POSIX pthread_ functions that are intercepted by Helgrind, failed with an error code. Usually indicates something bad happening. LockOrder An inconsistency in the acquisition order of locks was observed; dangerous, as it can potentially lead to deadlocks Misc One of various miscellaneous noteworthy conditions was observed (eg, thread exited whilst holding locks, "impossible" behaviour from the underlying threading library, etc)