Lines Matching refs:UCHAR
153 UCHAR nSfb[2]; /*!< Number of SBR-bands for low and high freq-resolution */
154 UCHAR nNfb; /*!< Actual number of noise bands to read from the bitstream*/
155 UCHAR numMaster; /*!< Number of SBR-bands in v_k_master */
156 UCHAR lowSubband; /*!< QMF-band where SBR frequency range starts */
157 UCHAR highSubband; /*!< QMF-band where SBR frequency range ends */
158 UCHAR limiterBandTable[MAX_NUM_LIMITERS+1]; /*!< Limiter band table. */
159 UCHAR noLimiterBands; /*!< Number of limiter bands. */
160 UCHAR nInvfBands; /*!< Number of bands for inverse filtering */
161 UCHAR *freqBandTable[2]; /*!< Pointers to freqBandTableLo and freqBandTableHi */
162 UCHAR freqBandTableLo[MAX_FREQ_COEFFS/2+1];
164 UCHAR freqBandTableHi[MAX_FREQ_COEFFS+1];
166 UCHAR freqBandTableNoise[MAX_NOISE_COEFFS+1];
168 UCHAR v_k_master[MAX_FREQ_COEFFS+1];
187 UCHAR ampResolution; /*!< Amplitude resolution of envelope values (0: 1.5dB, 1: 3dB) */
188 …UCHAR xover_band; /*!< Start index in #v_k_master[] used for dynamic crossover frequency …
189 UCHAR sbr_preprocessing; /*!< SBR prewhitening flag. */
194 UCHAR startFreq; /*!< Index for SBR start frequency */
195 UCHAR stopFreq; /*!< Index for SBR highest frequency */
196 UCHAR freqScale; /*!< 0: linear scale, 1-3 logarithmic scales */
197 UCHAR alterScale; /*!< Flag for coarser frequency resolution */
198 UCHAR noise_bands; /*!< Noise bands per octave, read from bitstream*/
201 UCHAR limiterBands; /*!< Index for number of limiter bands per octave */
202 UCHAR limiterGains; /*!< Index to select gain limit */
203 …UCHAR interpolFreq; /*!< Select gain calculation method (1: per QMF channel, 0: per SBR ban…
204 UCHAR smoothingLength; /*!< Smoothing of gains over time (0: on 1: off) */
212 …UCHAR status; /*!< Flags field used for signaling a reset right before the processi…
213 …UCHAR frameErrorFlag; /*!< Frame data valid flag. CAUTION: This variable will be overwritte…
215 UCHAR numberTimeSlots; /*!< AAC: 16,15 */
216 UCHAR numberOfAnalysisBands; /*!< Number of QMF analysis bands */
217 UCHAR timeStep; /*!< Time resolution of SBR in QMF-slots */
233 UCHAR frameClass; /*!< Select grid type */
234 UCHAR nEnvelopes; /*!< Number of envelopes */
235 UCHAR borders[MAX_ENVELOPES+1]; /*!< Envelope borders (in SBR-timeslots, e.g. mp3PRO: 0..11) */
236 UCHAR freqRes[MAX_ENVELOPES]; /*!< Frequency resolution for each envelope (0=low, 1=high) */
238 UCHAR nNoiseEnvelopes; /*!< Number of noise envelopes */
239 UCHAR bordersNoise[MAX_NOISE_ENVELOPES+1];/*!< borders of noise envelopes */
250 …UCHAR ampRes; /*!< Previous amplitude resolution (0: 1.5dB, 1: 3dB) */
251 UCHAR stopPos; /*!< Position in time where last envelope ended */
252 UCHAR frameErrorFlag; /*!< Previous frame status */
264 …UCHAR domain_vec[MAX_ENVELOPES]; /*!< Bitfield containing direction of delta-coding for each …
265 UCHAR domain_vec_noise[MAX_NOISE_ENVELOPES]; /*!< Same as above, but for noise envelopes */
271 UCHAR addHarmonics[MAX_FREQ_COEFFS]; /*!< Flags for synthetic sine addition */