1#Test 2NTP_SERVER=time.gpsonextra.net 3#Asia 4# NTP_SERVER=asia.pool.ntp.org 5#Europe 6# NTP_SERVER=europe.pool.ntp.org 7#North America 8# NTP_SERVER=north-america.pool.ntp.org 9 10XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin 11XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin 12XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin 13 14# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info 15# 4 - Debug, 5 - Verbose 16DEBUG_LEVEL = 2 17 18# Intermediate position report, 1=enable, 0=disable 19INTERMEDIATE_POS=0 20 21# supl version 1.0 22SUPL_VER=0x10000 23 24# Error Estimate 25# _SET = 1 26# _CLEAR = 0 27ERR_ESTIMATE=0 28 29# GPS Capabilities bit mask 30# SCHEDULING = 1 31# MSB = 2 32# MSA = 4 33# ULP = 0x20 34# default = MSA | MSB | SCHEDULING | ULP 35CAPABILITIES=0x27 36 37# Accuracy threshold for intermediate positions 38# less accurate positions are ignored, 0 for passing all positions 39# ACCURACY_THRES=5000 40 41################################ 42##### AGPS server settings ##### 43################################ 44 45# FOR SUPL SUPPORT, set the following 46# SUPL_HOST=supl.host.com or IP 47# SUPL_PORT=1234 48 49# FOR C2K PDE SUPPORT, set the following 50# C2K_HOST=c2k.pde.com or IP 51# C2K_PORT=1234 52 53################################ 54# Sensor Settings 55################################ 56 57# Needs to be set explicitly based on sensor 58# There is no default value. 59#GYRO_BIAS_RANDOM_WALK= 60 61SENSOR_ACCEL_BATCHES_PER_SEC=2 62SENSOR_ACCEL_SAMPLES_PER_BATCH=5 63SENSOR_GYRO_BATCHES_PER_SEC=2 64SENSOR_GYRO_SAMPLES_PER_BATCH=5 65 66# Sensor Control Mode (0=AUTO, 1=FORCE_ON) 67SENSOR_CONTROL_MODE=0 68 69# Enable or Disable Sensors for GPS use (0=Enable, 1=Disable) 70SENSOR_USAGE=0 71 72# Choose GSIFF sensor provider (1=DSPS, 2=Android NDK) 73SENSOR_PROVIDER=1 74 75################################ 76# Indoor Positioning Settings 77################################ 78# 0: QUIPC disabled, 1: QUIPC enabled, 2: forced QUIPC only 79QUIPC_ENABLED = 0 80 81################################ 82# EXTRA SETTINGS 83################################ 84# Enable or Disable Wiper (1=Enable, 0=Disable) 85ENABLE_WIPER=1 86 87#################################### 88# LTE Positioning Profile Settings 89#################################### 90# 0: Enable RRLP on LTE(Default) 1: Enable LPP_User_Plane on LTE 91LPP_PROFILE = 0 92