Lines Matching refs:modes
13 capabilities (such as DirectX or VESA VBE video modes) are present,
78 graphics, fewer high-resolution modes, and delayed sound. Or you
94 which uses more conservative video modes, but low-latency sound.
120 Note that VESA VBE modes aren't required for QWCL to run, but QWCL will
121 automatically make VESA modes available if they're present. Your BIOS
127 further information. QWCL can also use VBE/AF 1.0 and greater modes;
161 result in fewer or slower high-res video modes, and the mouse may be
201 menu. There are now two types of modes listed, windowed and
202 fullscreen. You can make any of these modes the current and/or
240 QWCL crashes while switching modes or Alt-Tabbing
245 by not switching modes or Alt-Tabbing, or by running -wavonly to
316 either a normal window or fullscreen. Consequently, in some modes and
367 In some modes, right-clicking on the QWCL task bar button doesn't work
454 it didn't (obviously this is only visible in windowed modes). The
504 Some DirectDraw modes flicker badly and look wrong
506 Page flipping doesn't work properly in some modes on some
507 systems, particularly when using some DirectDraw modes. You
514 change it, it thereafter applies to all modes, even if you
533 Some high-resolution video modes flicker or fail to initialize
536 do with triple-buffering in some modes on some DirectDraw drivers.
537 If you encounter this problem, either don't use the problem modes
540 can reduce performance in some modes, so do this only if needed.
619 VESA VBE 2.0 and VESA VBE/AF (Accelerator Functions) graphics modes,
622 QWCL does not require DirectDraw, but in order for DirectDraw modes to
628 QWCL does not require VESA VBE, but in order for VESA VBE modes to be
645 2.0 and VESA VBE/AF (Accelerator Functions). These modes will usually
649 2. It creates low-resolution modes on your graphics card.
650 Low-resolution video modes (such as 320x240, 400x300 and 512x384)
673 Video modes supported in Win95
676 the following modes:
683 DirectDraw or VESA VBE modes are available, then all the DirectDraw
684 and VESA modes will be presented as high-res choices. (320x200 will
687 (However, the command-line switch -nowindirect can turn off VESA modes
688 entirely.) If neither DirectDraw nor VESA modes are available, then
689 high-resolution modes will be provided by using fullscreen, borderless
696 NT is similar but not identical, because neither VESA VBE modes nor
698 the following modes:
704 modes are available, then those will be the high-res choices;
715 and pick one of the modes and be happy. In some cases, though, you
717 types of modes you want. One useful tip is to go into the console and
718 do vid_describemodes, which lists all the modes QWCL makes available on
721 you can tell which modes are DirectDraw, VESA, and so on, as follows:
733 You can use vid_mode from the console to set any of these modes. So,
734 for example, if you see that there are two 320x200 modes (such as one
740 There's more to the windowed modes than you might think. 320x240 is
814 access modes such as DirectDraw or VESA modes, or even VGA 320x200
818 -nowindirect: QWCL will not try to use VESA VBE 2.0 modes, or VBE/AF
819 1.0 or later modes. Note that if there are both DirectDraw and VESA
820 modes for a given resolution, QWCL will normally use the VESA mode;
821 -nowindirect allows DirectDraw modes to be the preferred choice for
825 -nodirectdraw: QWCL will not try to use DirectDraw modes. This can be
828 -novbeaf: QWCL will not try to use VBE/AF 1.0 or later modes.
835 DirectDraw and VESA modes can be considerably faster than mode 0x13,
839 effect on modes selected via the console variable vid_mode, and if
845 switch is that DirectDraw and VESA modes can cause problems in some
849 -noautostretch: don't stretch windowed modes selected with
853 are no DirectDraw or VESA modes available.
855 -allow360: allow listing of 360-wide modes in the video mode menu.
857 full, which could cause high-res modes not to be displayed.
862 could possibly happen in some modes with some DirectDraw drivers.