#
# Copyright (C) 2013 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

# This file includes all definitions that apply to ALL hammerhead devices, and
# are also specific to hammerhead devices
#
# Everything in this directory will become public


ifeq ($(TARGET_PREBUILT_KERNEL),)
LOCAL_KERNEL := device/lge/hammerhead-kernel/zImage-dtb
else
LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL)
endif


PRODUCT_COPY_FILES := \
    $(LOCAL_KERNEL):kernel

PRODUCT_COPY_FILES += \
    device/lge/hammerhead/init.hammerhead.rc:root/init.hammerhead.rc \
    device/lge/hammerhead/init.hammerhead.usb.rc:root/init.hammerhead.usb.rc \
    device/lge/hammerhead/fstab.hammerhead:root/fstab.hammerhead \
    device/lge/hammerhead/ueventd.hammerhead.rc:root/ueventd.hammerhead.rc

# Input device files for hammerhead
PRODUCT_COPY_FILES += \
    device/lge/hammerhead/gpio-keys.kl:system/usr/keylayout/gpio-keys.kl \
    device/lge/hammerhead/gpio-keys.kcm:system/usr/keychars/gpio-keys.kcm \
    device/lge/hammerhead/qpnp_pon.kl:system/usr/keylayout/qpnp_pon.kl \
    device/lge/hammerhead/qpnp_pon.kcm:system/usr/keychars/qpnp_pon.kcm \
    device/lge/hammerhead/Button_Jack.kl:system/usr/keylayout/msm8974-taiko-mtp-snd-card_Button_Jack.kl \
    device/lge/hammerhead/Button_Jack.kcm:system/usr/keychars/msm8974-taiko-mtp-snd-card_Button_Jack.kcm \
    device/lge/hammerhead/hs_detect.kl:system/usr/keylayout/hs_detect.kl \
    device/lge/hammerhead/hs_detect.kcm:system/usr/keychars/hs_detect.kcm

# Prebuilt input device calibration files
PRODUCT_COPY_FILES += \
    device/lge/hammerhead/touch_dev.idc:system/usr/idc/touch_dev.idc

PRODUCT_COPY_FILES += \
    device/lge/hammerhead/audio_policy.conf:system/etc/audio_policy.conf \
    device/lge/hammerhead/mixer_paths.xml:system/etc/mixer_paths.xml

PRODUCT_COPY_FILES += \
    device/lge/hammerhead/media_codecs.xml:system/etc/media_codecs.xml \
    device/lge/hammerhead/media_profiles.xml:system/etc/media_profiles.xml

PRODUCT_COPY_FILES += \
    device/lge/hammerhead/bcmdhd.cal:system/etc/wifi/bcmdhd.cal

# These are the hardware-specific features
PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/handheld_core_hardware.xml:system/etc/permissions/handheld_core_hardware.xml \
    frameworks/native/data/etc/android.hardware.camera.flash-autofocus.xml:system/etc/permissions/android.hardware.camera.flash-autofocus.xml \
    frameworks/native/data/etc/android.hardware.camera.front.xml:system/etc/permissions/android.hardware.camera.front.xml \
    frameworks/native/data/etc/android.hardware.location.gps.xml:system/etc/permissions/android.hardware.location.gps.xml \
    frameworks/native/data/etc/android.hardware.wifi.xml:system/etc/permissions/android.hardware.wifi.xml \
    frameworks/native/data/etc/android.hardware.wifi.direct.xml:system/etc/permissions/android.hardware.wifi.direct.xml \
    frameworks/native/data/etc/android.hardware.sensor.proximity.xml:system/etc/permissions/android.hardware.sensor.proximity.xml \
    frameworks/native/data/etc/android.hardware.sensor.light.xml:system/etc/permissions/android.hardware.sensor.light.xml \
    frameworks/native/data/etc/android.hardware.sensor.gyroscope.xml:system/etc/permissions/android.hardware.sensor.gyroscope.xml \
    frameworks/native/data/etc/android.hardware.sensor.barometer.xml:system/etc/permissions/android.hardware.sensor.barometer.xml \
    frameworks/native/data/etc/android.hardware.sensor.stepcounter.xml:system/etc/permissions/android.hardware.sensor.stepcounter.xml \
    frameworks/native/data/etc/android.hardware.sensor.stepdetector.xml:system/etc/permissions/android.hardware.sensor.stepdetector.xml \
    frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:system/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \
    frameworks/native/data/etc/android.software.sip.voip.xml:system/etc/permissions/android.software.sip.voip.xml \
    frameworks/native/data/etc/android.hardware.usb.accessory.xml:system/etc/permissions/android.hardware.usb.accessory.xml \
    frameworks/native/data/etc/android.hardware.usb.host.xml:system/etc/permissions/android.hardware.usb.host.xml \
    frameworks/native/data/etc/android.hardware.telephony.gsm.xml:system/etc/permissions/android.hardware.telephony.gsm.xml \
    frameworks/native/data/etc/android.hardware.audio.low_latency.xml:system/etc/permissions/android.hardware.audio.low_latency.xml \
    frameworks/native/data/etc/android.hardware.bluetooth_le.xml:system/etc/permissions/android.hardware.bluetooth_le.xml \
    frameworks/native/data/etc/android.hardware.telephony.cdma.xml:system/etc/permissions/android.hardware.telephony.cdma.xml

# For GPS
PRODUCT_COPY_FILES += \
    device/lge/hammerhead/sec_config:system/etc/sec_config

# NFC access control + feature files + configuration
PRODUCT_COPY_FILES += \
    frameworks/native/data/etc/android.hardware.nfc.xml:system/etc/permissions/android.hardware.nfc.xml \
    frameworks/native/data/etc/android.hardware.nfc.hce.xml:system/etc/permissions/android.hardware.nfc.hce.xml \
    device/lge/hammerhead/nfc/libnfc-brcm.conf:system/etc/libnfc-brcm.conf \
    device/lge/hammerhead/nfc/libnfc-brcm-20791b05.conf:system/etc/libnfc-brcm-20791b05.conf

PRODUCT_COPY_FILES += \
    device/lge/hammerhead/thermal-engine-hammerhead.conf:system/etc/thermal-engine.conf

PRODUCT_TAGS += dalvik.gc.type-precise

# This device is xhdpi.  However the platform doesn't
# currently contain all of the bitmaps at xhdpi density so
# we do this little trick to fall back to the hdpi version
# if the xhdpi doesn't exist.
PRODUCT_AAPT_CONFIG := normal hdpi xhdpi xxhdpi
PRODUCT_AAPT_PREF_CONFIG := xxhdpi

PRODUCT_CHARACTERISTICS := nosdcard

DEVICE_PACKAGE_OVERLAYS := \
    device/lge/hammerhead/overlay

# Live Wallpapers
PRODUCT_PACKAGES += \
    LiveWallpapersPicker \
    librs_jni

PRODUCT_PACKAGES += \
    gralloc.msm8974 \
    libgenlock \
    hwcomposer.msm8974 \
    memtrack.msm8974 \
    libqdutils \
    libqdMetaData

PRODUCT_PACKAGES += \
    libc2dcolorconvert \
    libstagefrighthw \
    libOmxCore \
    libmm-omxcore \
    libOmxVdec \
    libOmxVdecHevc \
    libOmxVenc

PRODUCT_PACKAGES += \
    audio.primary.msm8974 \
    audio.a2dp.default \
    audio.usb.default \
    audio.r_submix.default \
    libaudio-resampler

# Audio effects
PRODUCT_PACKAGES += \
    libqcomvisualizer \
    libqcomvoiceprocessing \
    libqcomvoiceprocessingdescriptors

PRODUCT_COPY_FILES += \
    device/lge/hammerhead/audio_effects.conf:system/vendor/etc/audio_effects.conf

PRODUCT_PACKAGES += \
    libqomx_core \
    libmmcamera_interface \
    libmmjpeg_interface \
    camera.hammerhead \
    mm-jpeg-interface-test \
    mm-qcamera-app

PRODUCT_PACKAGES += \
    keystore.msm8974

PRODUCT_PACKAGES += \
    power.msm8974

# GPS configuration
PRODUCT_COPY_FILES += \
    device/lge/hammerhead/gps.conf:system/etc/gps.conf

# GPS
PRODUCT_PACKAGES += \
    libloc_adapter \
    libloc_eng \
    libloc_api_v02 \
    libloc_ds_api \
    libloc_core \
    libizat_core \
    libgeofence \
    libgps.utils \
    gps.msm8974 \
    flp.msm8974

# NFC packages
PRODUCT_PACKAGES += \
    nfc_nci.hammerhead \
    NfcNci \
    Tag

PRODUCT_PACKAGES += \
    libion

PRODUCT_PACKAGES += \
    lights.hammerhead

PRODUCT_PACKAGES += \
    com.android.future.usb.accessory

# Filesystem management tools
PRODUCT_PACKAGES += \
    e2fsck

# for off charging mode
PRODUCT_PACKAGES += \
    charger \
    charger_res_images

PRODUCT_PACKAGES += \
    bdAddrLoader

PRODUCT_PROPERTY_OVERRIDES += \
    ro.opengles.version=196608

PRODUCT_PROPERTY_OVERRIDES += \
    ro.sf.lcd_density=480

PRODUCT_PROPERTY_OVERRIDES += \
    persist.hwc.mdpcomp.enable=true

PRODUCT_PROPERTY_OVERRIDES += \
    ro.hwui.texture_cache_size=72 \
    ro.hwui.layer_cache_size=48 \
    ro.hwui.r_buffer_cache_size=8 \
    ro.hwui.path_cache_size=32 \
    ro.hwui.gradient_cache_size=1 \
    ro.hwui.drop_shadow_cache_size=6 \
    ro.hwui.texture_cache_flushrate=0.4 \
    ro.hwui.text_small_cache_width=1024 \
    ro.hwui.text_small_cache_height=1024 \
    ro.hwui.text_large_cache_width=2048 \
    ro.hwui.text_large_cache_height=1024

PRODUCT_PROPERTY_OVERRIDES += \
    drm.service.enabled=true

# Set sensor streaming rate
PRODUCT_PROPERTY_OVERRIDES += \
    ro.qc.sensors.max_geomag_rotvec=60 \
    ro.qc.sensors.max_gyro_rate=200 \
    ro.qc.sensors.max_accel_rate=200 \
    ro.qc.sensors.max_grav=200 \
    ro.qc.sensors.max_rotvec=200 \
    ro.qc.sensors.max_ortn=200 \
    ro.qc.sensors.max_linacc=200 \
    ro.qc.sensors.max_gamerv_rate=200

# Enable optional sensor types
PRODUCT_PROPERTY_OVERRIDES += \
    ro.qualcomm.sensors.smd=true \
    ro.qualcomm.sensors.game_rv=true \
    ro.qualcomm.sensors.georv=true \
    ro.qc.sensors.smgr_mag_cal_en=true \
    ro.qc.sensors.step_detector=true \
    ro.qc.sensors.step_counter=true

# Enable some debug messages by default
PRODUCT_PROPERTY_OVERRIDES += \
    debug.qualcomm.sns.hal=w \
    debug.qualcomm.sns.daemon=w \
    debug.qualcomm.sns.libsensor1=w

# Ril sends only one RIL_UNSOL_CALL_RING, so set call_ring.multiple to false
PRODUCT_PROPERTY_OVERRIDES += \
    ro.telephony.call_ring.multiple=0

PRODUCT_PROPERTY_OVERRIDES += \
    wifi.interface=wlan0 \
    wifi.supplicant_scan_interval=15

# Enable AAC 5.1 output
PRODUCT_PROPERTY_OVERRIDES += \
    media.aac_51_output_enabled=true

# Do not power down SIM card when modem is sent to Low Power Mode.
PRODUCT_PROPERTY_OVERRIDES += \
    persist.radio.apm_sim_not_pwdn=1

# LTE, CDMA, GSM/WCDMA
PRODUCT_PROPERTY_OVERRIDES += \
    ro.telephony.default_network=10 \
    telephony.lteOnCdmaDevice=1 \
    persist.radio.mode_pref_nv10=1

# update 1x signal strength after 2s
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
    persist.radio.snapshot_enabled=1 \
    persist.radio.snapshot_timer=2

PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
    persist.radio.use_cc_names=true

# Audio Configuration
PRODUCT_PROPERTY_OVERRIDES += \
    persist.audio.handset.mic.type=digital \
    persist.audio.dualmic.config=endfire \
    persist.audio.fluence.voicecall=true \
    persist.audio.fluence.voicerec=false \
    persist.audio.fluence.speaker=false \
    af.resampler.quality=4

# Setup custom emergency number list based on the MCC. This is needed by RIL
PRODUCT_PROPERTY_OVERRIDES += \
    persist.radio.custom_ecc=1

# set default USB configuration
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
    persist.sys.usb.config=mtp

# Request modem to send PLMN name always irrespective
# of display condition in EFSPN.
# RIL uses this property.
PRODUCT_PROPERTY_OVERRIDES += \
    persist.radio.always_send_plmn=true

PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
    rild.libpath=/system/lib/libril-qc-qmi-1.so

# Camera configuration
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
    camera.disable_zsl_mode=1

# Input resampling configuration
PRODUCT_PROPERTY_OVERRIDES += \
    ro.input.noresample=1

# setup dalvik vm configs.
$(call inherit-product, frameworks/native/build/phone-xhdpi-2048-dalvik-heap.mk)

$(call inherit-product-if-exists, hardware/qcom/msm8x74/msm8x74.mk)
$(call inherit-product-if-exists, vendor/qcom/gpu/msm8x74/msm8x74-gpu-vendor.mk)
$(call inherit-product-if-exists, hardware/broadcom/wlan/bcmdhd/firmware/bcm4339/device-bcm.mk)