.\" Automatically generated by Pod::Man 2.25 (Pod::Simple 3.16)
.\"
.\" Standard preamble:
.\" ========================================================================
.de Sp \" Vertical space (when we can't use .PP)
.if t .sp .5v
.if n .sp
..
.de Vb \" Begin verbatim text
.ft CW
.nf
.ne \\$1
..
.de Ve \" End verbatim text
.ft R
.fi
..
.\" Set up some character translations and predefined strings.  \*(-- will
.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
.\" double quote, and \*(R" will give a right double quote.  \*(C+ will
.\" give a nicer C++.  Capital omega is used to do unbreakable dashes and
.\" therefore won't be available.  \*(C` and \*(C' expand to `' in nroff,
.\" nothing in troff, for use with C<>.
.tr \(*W-
.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
.ie n \{\
.    ds -- \(*W-
.    ds PI pi
.    if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
.    if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\"  diablo 12 pitch
.    ds L" ""
.    ds R" ""
.    ds C` ""
.    ds C' ""
'br\}
.el\{\
.    ds -- \|\(em\|
.    ds PI \(*p
.    ds L" ``
.    ds R" ''
'br\}
.\"
.\" Escape single quotes in literal strings from groff's Unicode transform.
.ie \n(.g .ds Aq \(aq
.el       .ds Aq '
.\"
.\" If the F register is turned on, we'll generate index entries on stderr for
.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
.\" entries marked with X<> in POD.  Of course, you'll have to process the
.\" output yourself in some meaningful fashion.
.ie \nF \{\
.    de IX
.    tm Index:\\$1\t\\n%\t"\\$2"
..
.    nr % 0
.    rr F
.\}
.el \{\
.    de IX
..
.\}
.\"
.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
.\" Fear.  Run.  Save yourself.  No user-serviceable parts.
.    \" fudge factors for nroff and troff
.if n \{\
.    ds #H 0
.    ds #V .8m
.    ds #F .3m
.    ds #[ \f1
.    ds #] \fP
.\}
.if t \{\
.    ds #H ((1u-(\\\\n(.fu%2u))*.13m)
.    ds #V .6m
.    ds #F 0
.    ds #[ \&
.    ds #] \&
.\}
.    \" simple accents for nroff and troff
.if n \{\
.    ds ' \&
.    ds ` \&
.    ds ^ \&
.    ds , \&
.    ds ~ ~
.    ds /
.\}
.if t \{\
.    ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
.    ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
.    ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
.    ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
.    ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
.    ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
.\}
.    \" troff and (daisy-wheel) nroff accents
.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
.ds ae a\h'-(\w'a'u*4/10)'e
.ds Ae A\h'-(\w'A'u*4/10)'E
.    \" corrections for vroff
.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
.    \" for low resolution devices (crt and lpr)
.if \n(.H>23 .if \n(.V>19 \
\{\
.    ds : e
.    ds 8 ss
.    ds o a
.    ds d- d\h'-1'\(ga
.    ds D- D\h'-1'\(hy
.    ds th \o'bp'
.    ds Th \o'LP'
.    ds ae ae
.    ds Ae AE
.\}
.rm #[ #] #H #V #F C
.\" ========================================================================
.\"
.IX Title "JSON 3pm"
.TH JSON 3pm "2013-06-05" "perl v5.14.2" "User Contributed Perl Documentation"
.\" For nroff, turn off justification.  Always turn off hyphenation; it makes
.\" way too many mistakes in technical documents.
.if n .ad l
.nh
.SH "NAME"
JSON \- JSON (JavaScript Object Notation) encoder/decoder
.SH "SYNOPSIS"
.IX Header "SYNOPSIS"
.Vb 1
\& use JSON; # imports encode_json, decode_json, to_json and from_json.
\& 
\& # simple and fast interfaces (expect/generate UTF\-8)
\& 
\& $utf8_encoded_json_text = encode_json $perl_hash_or_arrayref;
\& $perl_hash_or_arrayref  = decode_json $utf8_encoded_json_text;
\& 
\& # OO\-interface
\& 
\& $json = JSON\->new\->allow_nonref;
\& 
\& $json_text   = $json\->encode( $perl_scalar );
\& $perl_scalar = $json\->decode( $json_text );
\& 
\& $pretty_printed = $json\->pretty\->encode( $perl_scalar ); # pretty\-printing
\& 
\& # If you want to use PP only support features, call with \*(Aq\-support_by_pp\*(Aq
\& # When XS unsupported feature is enable, using PP (de|en)code instead of XS ones.
\& 
\& use JSON \-support_by_pp;
\& 
\& # option\-acceptable interfaces (expect/generate UNICODE by default)
\& 
\& $json_text   = to_json( $perl_scalar, { ascii => 1, pretty => 1 } );
\& $perl_scalar = from_json( $json_text, { utf8  => 1 } );
\& 
\& # Between (en|de)code_json and (to|from)_json, if you want to write
\& # a code which communicates to an outer world (encoded in UTF\-8),
\& # recommend to use (en|de)code_json.
.Ve
.SH "VERSION"
.IX Header "VERSION"
.Vb 1
\&    2.59
.Ve
.PP
This version is compatible with \s-1JSON::XS\s0 \fB2.34\fR and later.
.SH "NOTE"
.IX Header "NOTE"
\&\s-1JSON::PP\s0 was earlier included in the \f(CW\*(C`JSON\*(C'\fR distribution, but
has since Perl 5.14 been a core module. For this reason,
\&\s-1JSON::PP\s0 was removed from the \s-1JSON\s0 distribution and can now
be found also in the Perl5 repository at
.IP "\(bu" 4
<http://perl5.git.perl.org/perl.git>
.PP
(The newest \s-1JSON::PP\s0 version still exists in \s-1CPAN\s0.)
.PP
Instead, the \f(CW\*(C`JSON\*(C'\fR distribution will include JSON::backportPP
for backwards computability. \s-1JSON\s0.pm should thus work as it did
before.
.SH "DESCRIPTION"
.IX Header "DESCRIPTION"
.Vb 6
\& ************************** CAUTION ********************************
\& * This is \*(AqJSON module version 2\*(Aq and there are many differences  *
\& * to version 1.xx                                                 *
\& * Please check your applications using old version.              *
\& *   See to \*(AqINCOMPATIBLE CHANGES TO OLD VERSION\*(Aq                  *
\& *******************************************************************
.Ve
.PP
\&\s-1JSON\s0 (JavaScript Object Notation) is a simple data format.
See to <http://www.json.org/> and \f(CW\*(C`RFC4627\*(C'\fR(<http://www.ietf.org/rfc/rfc4627.txt>).
.PP
This module converts Perl data structures to \s-1JSON\s0 and vice versa using either
\&\s-1JSON::XS\s0 or \s-1JSON::PP\s0.
.PP
\&\s-1JSON::XS\s0 is the fastest and most proper \s-1JSON\s0 module on \s-1CPAN\s0 which must be
compiled and installed in your environment.
\&\s-1JSON::PP\s0 is a pure-Perl module which is bundled in this distribution and
has a strong compatibility to \s-1JSON::XS\s0.
.PP
This module try to use \s-1JSON::XS\s0 by default and fail to it, use \s-1JSON::PP\s0 instead.
So its features completely depend on \s-1JSON::XS\s0 or \s-1JSON::PP\s0.
.PP
See to \*(L"\s-1BACKEND\s0 \s-1MODULE\s0 \s-1DECISION\s0\*(R".
.PP
To distinguish the module name '\s-1JSON\s0' and the format type \s-1JSON\s0,
the former is quoted by C<> (its results vary with your using media),
and the latter is left just as it is.
.PP
Module name : \f(CW\*(C`JSON\*(C'\fR
.PP
Format type : \s-1JSON\s0
.SS "\s-1FEATURES\s0"
.IX Subsection "FEATURES"
.IP "\(bu" 4
correct unicode handling
.Sp
This module (i.e. backend modules) knows how to handle Unicode, documents
how and when it does so, and even documents what \*(L"correct\*(R" means.
.Sp
Even though there are limitations, this feature is available since Perl version 5.6.
.Sp
\&\s-1JSON::XS\s0 requires Perl 5.8.2 (but works correctly in 5.8.8 or later), so in older versions
\&\f(CW\*(C`JSON\*(C'\fR should call \s-1JSON::PP\s0 as the backend which can be used since Perl 5.005.
.Sp
With Perl 5.8.x \s-1JSON::PP\s0 works, but from 5.8.0 to 5.8.2, because of a Perl side problem,
\&\s-1JSON::PP\s0 works slower in the versions. And in 5.005, the Unicode handling is not available.
See to \*(L"\s-1UNICODE\s0 \s-1HANDLING\s0 \s-1ON\s0 \s-1PERLS\s0\*(R" in \s-1JSON::PP\s0 for more information.
.Sp
See also to \*(L"A \s-1FEW\s0 \s-1NOTES\s0 \s-1ON\s0 \s-1UNICODE\s0 \s-1AND\s0 \s-1PERL\s0\*(R" in \s-1JSON::XS\s0
and \*(L"\s-1ENCODING/CODESET_FLAG_NOTES\s0\*(R" in \s-1JSON::XS\s0.
.IP "\(bu" 4
round-trip integrity
.Sp
When you serialise a perl data structure using only data types supported
by \s-1JSON\s0 and Perl, the deserialised data structure is identical on the Perl
level. (e.g. the string \*(L"2.0\*(R" doesn't suddenly become \*(L"2\*(R" just because
it looks like a number). There \fIare\fR minor exceptions to this, read the
\&\*(L"\s-1MAPPING\s0\*(R" section below to learn about those.
.IP "\(bu" 4
strict checking of \s-1JSON\s0 correctness
.Sp
There is no guessing, no generating of illegal \s-1JSON\s0 texts by default,
and only \s-1JSON\s0 is accepted as input by default (the latter is a security
feature).
.Sp
See to \*(L"\s-1FEATURES\s0\*(R" in \s-1JSON::XS\s0 and \*(L"\s-1FEATURES\s0\*(R" in \s-1JSON::PP\s0.
.IP "\(bu" 4
fast
.Sp
This module returns a \s-1JSON::XS\s0 object itself if available.
Compared to other \s-1JSON\s0 modules and other serialisers such as Storable,
\&\s-1JSON::XS\s0 usually compares favorably in terms of speed, too.
.Sp
If not available, \f(CW\*(C`JSON\*(C'\fR returns a \s-1JSON::PP\s0 object instead of \s-1JSON::XS\s0 and
it is very slow as pure-Perl.
.IP "\(bu" 4
simple to use
.Sp
This module has both a simple functional interface as well as an
object oriented interface interface.
.IP "\(bu" 4
reasonably versatile output formats
.Sp
You can choose between the most compact guaranteed-single-line format possible
(nice for simple line-based protocols), a pure-ASCII format (for when your transport
is not 8\-bit clean, still supports the whole Unicode range), or a pretty-printed
format (for when you want to read that stuff). Or you can combine those features
in whatever way you like.
.SH "FUNCTIONAL INTERFACE"
.IX Header "FUNCTIONAL INTERFACE"
Some documents are copied and modified from \*(L"\s-1FUNCTIONAL\s0 \s-1INTERFACE\s0\*(R" in \s-1JSON::XS\s0.
\&\f(CW\*(C`to_json\*(C'\fR and \f(CW\*(C`from_json\*(C'\fR are additional functions.
.SS "encode_json"
.IX Subsection "encode_json"
.Vb 1
\&    $json_text = encode_json $perl_scalar
.Ve
.PP
Converts the given Perl data structure to a \s-1UTF\-8\s0 encoded, binary string.
.PP
This function call is functionally identical to:
.PP
.Vb 1
\&    $json_text = JSON\->new\->utf8\->encode($perl_scalar)
.Ve
.SS "decode_json"
.IX Subsection "decode_json"
.Vb 1
\&    $perl_scalar = decode_json $json_text
.Ve
.PP
The opposite of \f(CW\*(C`encode_json\*(C'\fR: expects an \s-1UTF\-8\s0 (binary) string and tries
to parse that as an \s-1UTF\-8\s0 encoded \s-1JSON\s0 text, returning the resulting
reference.
.PP
This function call is functionally identical to:
.PP
.Vb 1
\&    $perl_scalar = JSON\->new\->utf8\->decode($json_text)
.Ve
.SS "to_json"
.IX Subsection "to_json"
.Vb 1
\&   $json_text = to_json($perl_scalar)
.Ve
.PP
Converts the given Perl data structure to a json string.
.PP
This function call is functionally identical to:
.PP
.Vb 1
\&   $json_text = JSON\->new\->encode($perl_scalar)
.Ve
.PP
Takes a hash reference as the second.
.PP
.Vb 1
\&   $json_text = to_json($perl_scalar, $flag_hashref)
.Ve
.PP
So,
.PP
.Vb 1
\&   $json_text = to_json($perl_scalar, {utf8 => 1, pretty => 1})
.Ve
.PP
equivalent to:
.PP
.Vb 1
\&   $json_text = JSON\->new\->utf8(1)\->pretty(1)\->encode($perl_scalar)
.Ve
.PP
If you want to write a modern perl code which communicates to outer world,
you should use \f(CW\*(C`encode_json\*(C'\fR (supposed that \s-1JSON\s0 data are encoded in \s-1UTF\-8\s0).
.SS "from_json"
.IX Subsection "from_json"
.Vb 1
\&   $perl_scalar = from_json($json_text)
.Ve
.PP
The opposite of \f(CW\*(C`to_json\*(C'\fR: expects a json string and tries
to parse it, returning the resulting reference.
.PP
This function call is functionally identical to:
.PP
.Vb 1
\&    $perl_scalar = JSON\->decode($json_text)
.Ve
.PP
Takes a hash reference as the second.
.PP
.Vb 1
\&    $perl_scalar = from_json($json_text, $flag_hashref)
.Ve
.PP
So,
.PP
.Vb 1
\&    $perl_scalar = from_json($json_text, {utf8 => 1})
.Ve
.PP
equivalent to:
.PP
.Vb 1
\&    $perl_scalar = JSON\->new\->utf8(1)\->decode($json_text)
.Ve
.PP
If you want to write a modern perl code which communicates to outer world,
you should use \f(CW\*(C`decode_json\*(C'\fR (supposed that \s-1JSON\s0 data are encoded in \s-1UTF\-8\s0).
.SS "JSON::is_bool"
.IX Subsection "JSON::is_bool"
.Vb 1
\&    $is_boolean = JSON::is_bool($scalar)
.Ve
.PP
Returns true if the passed scalar represents either JSON::true or
JSON::false, two constants that act like \f(CW1\fR and \f(CW0\fR respectively
and are also used to represent \s-1JSON\s0 \f(CW\*(C`true\*(C'\fR and \f(CW\*(C`false\*(C'\fR in Perl strings.
.SS "JSON::true"
.IX Subsection "JSON::true"
Returns \s-1JSON\s0 true value which is blessed object.
It \f(CW\*(C`isa\*(C'\fR JSON::Boolean object.
.SS "JSON::false"
.IX Subsection "JSON::false"
Returns \s-1JSON\s0 false value which is blessed object.
It \f(CW\*(C`isa\*(C'\fR JSON::Boolean object.
.SS "JSON::null"
.IX Subsection "JSON::null"
Returns \f(CW\*(C`undef\*(C'\fR.
.PP
See \s-1MAPPING\s0, below, for more information on how \s-1JSON\s0 values are mapped to
Perl.
.SH "HOW DO I DECODE A DATA FROM OUTER AND ENCODE TO OUTER"
.IX Header "HOW DO I DECODE A DATA FROM OUTER AND ENCODE TO OUTER"
This section supposes that your perl version is 5.8 or later.
.PP
If you know a \s-1JSON\s0 text from an outer world \- a network, a file content, and so on,
is encoded in \s-1UTF\-8\s0, you should use \f(CW\*(C`decode_json\*(C'\fR or \f(CW\*(C`JSON\*(C'\fR module object
with \f(CW\*(C`utf8\*(C'\fR enable. And the decoded result will contain \s-1UNICODE\s0 characters.
.PP
.Vb 4
\&  # from network
\&  my $json        = JSON\->new\->utf8;
\&  my $json_text   = CGI\->new\->param( \*(Aqjson_data\*(Aq );
\&  my $perl_scalar = $json\->decode( $json_text );
\&  
\&  # from file content
\&  local $/;
\&  open( my $fh, \*(Aq<\*(Aq, \*(Aqjson.data\*(Aq );
\&  $json_text   = <$fh>;
\&  $perl_scalar = decode_json( $json_text );
.Ve
.PP
If an outer data is not encoded in \s-1UTF\-8\s0, firstly you should \f(CW\*(C`decode\*(C'\fR it.
.PP
.Vb 5
\&  use Encode;
\&  local $/;
\&  open( my $fh, \*(Aq<\*(Aq, \*(Aqjson.data\*(Aq );
\&  my $encoding = \*(Aqcp932\*(Aq;
\&  my $unicode_json_text = decode( $encoding, <$fh> ); # UNICODE
\&  
\&  # or you can write the below code.
\&  #
\&  # open( my $fh, "<:encoding($encoding)", \*(Aqjson.data\*(Aq );
\&  # $unicode_json_text = <$fh>;
.Ve
.PP
In this case, \f(CW$unicode_json_text\fR is of course \s-1UNICODE\s0 string.
So you \fBcannot\fR use \f(CW\*(C`decode_json\*(C'\fR nor \f(CW\*(C`JSON\*(C'\fR module object with \f(CW\*(C`utf8\*(C'\fR enable.
Instead of them, you use \f(CW\*(C`JSON\*(C'\fR module object with \f(CW\*(C`utf8\*(C'\fR disable or \f(CW\*(C`from_json\*(C'\fR.
.PP
.Vb 3
\&  $perl_scalar = $json\->utf8(0)\->decode( $unicode_json_text );
\&  # or
\&  $perl_scalar = from_json( $unicode_json_text );
.Ve
.PP
Or \f(CW\*(C`encode \*(Aqutf8\*(Aq\*(C'\fR and \f(CW\*(C`decode_json\*(C'\fR:
.PP
.Vb 2
\&  $perl_scalar = decode_json( encode( \*(Aqutf8\*(Aq, $unicode_json_text ) );
\&  # this way is not efficient.
.Ve
.PP
And now, you want to convert your \f(CW$perl_scalar\fR into \s-1JSON\s0 data and
send it to an outer world \- a network or a file content, and so on.
.PP
Your data usually contains \s-1UNICODE\s0 strings and you want the converted data to be encoded
in \s-1UTF\-8\s0, you should use \f(CW\*(C`encode_json\*(C'\fR or \f(CW\*(C`JSON\*(C'\fR module object with \f(CW\*(C`utf8\*(C'\fR enable.
.PP
.Vb 3
\&  print encode_json( $perl_scalar ); # to a network? file? or display?
\&  # or
\&  print $json\->utf8\->encode( $perl_scalar );
.Ve
.PP
If \f(CW$perl_scalar\fR does not contain \s-1UNICODE\s0 but \f(CW$encoding\fR\-encoded strings
for some reason, then its characters are regarded as \fBlatin1\fR for perl
(because it does not concern with your \f(CW$encoding\fR).
You \fBcannot\fR use \f(CW\*(C`encode_json\*(C'\fR nor \f(CW\*(C`JSON\*(C'\fR module object with \f(CW\*(C`utf8\*(C'\fR enable.
Instead of them, you use \f(CW\*(C`JSON\*(C'\fR module object with \f(CW\*(C`utf8\*(C'\fR disable or \f(CW\*(C`to_json\*(C'\fR.
Note that the resulted text is a \s-1UNICODE\s0 string but no problem to print it.
.PP
.Vb 6
\&  # $perl_scalar contains $encoding encoded string values
\&  $unicode_json_text = $json\->utf8(0)\->encode( $perl_scalar );
\&  # or 
\&  $unicode_json_text = to_json( $perl_scalar );
\&  # $unicode_json_text consists of characters less than 0x100
\&  print $unicode_json_text;
.Ve
.PP
Or \f(CW\*(C`decode $encoding\*(C'\fR all string values and \f(CW\*(C`encode_json\*(C'\fR:
.PP
.Vb 3
\&  $perl_scalar\->{ foo } = decode( $encoding, $perl_scalar\->{ foo } );
\&  # ... do it to each string values, then encode_json
\&  $json_text = encode_json( $perl_scalar );
.Ve
.PP
This method is a proper way but probably not efficient.
.PP
See to Encode, perluniintro.
.SH "COMMON OBJECT-ORIENTED INTERFACE"
.IX Header "COMMON OBJECT-ORIENTED INTERFACE"
.SS "new"
.IX Subsection "new"
.Vb 1
\&    $json = JSON\->new
.Ve
.PP
Returns a new \f(CW\*(C`JSON\*(C'\fR object inherited from either \s-1JSON::XS\s0 or \s-1JSON::PP\s0
that can be used to de/encode \s-1JSON\s0 strings.
.PP
All boolean flags described below are by default \fIdisabled\fR.
.PP
The mutators for flags all return the \s-1JSON\s0 object again and thus calls can
be chained:
.PP
.Vb 2
\&   my $json = JSON\->new\->utf8\->space_after\->encode({a => [1,2]})
\&   => {"a": [1, 2]}
.Ve
.SS "ascii"
.IX Subsection "ascii"
.Vb 1
\&    $json = $json\->ascii([$enable])
\&    
\&    $enabled = $json\->get_ascii
.Ve
.PP
If \f(CW$enable\fR is true (or missing), then the encode method will not generate characters outside
the code range 0..127. Any Unicode characters outside that range will be escaped using either
a single \euXXXX or a double \euHHHH\euLLLLL escape sequence, as per \s-1RFC4627\s0.
.PP
If \f(CW$enable\fR is false, then the encode method will not escape Unicode characters unless
required by the \s-1JSON\s0 syntax or other flags. This results in a faster and more compact format.
.PP
This feature depends on the used Perl version and environment.
.PP
See to \*(L"\s-1UNICODE\s0 \s-1HANDLING\s0 \s-1ON\s0 \s-1PERLS\s0\*(R" in \s-1JSON::PP\s0 if the backend is \s-1PP\s0.
.PP
.Vb 2
\&  JSON\->new\->ascii(1)\->encode([chr 0x10401])
\&  => ["\eud801\eudc01"]
.Ve
.SS "latin1"
.IX Subsection "latin1"
.Vb 1
\&    $json = $json\->latin1([$enable])
\&    
\&    $enabled = $json\->get_latin1
.Ve
.PP
If \f(CW$enable\fR is true (or missing), then the encode method will encode the resulting \s-1JSON\s0
text as latin1 (or iso\-8859\-1), escaping any characters outside the code range 0..255.
.PP
If \f(CW$enable\fR is false, then the encode method will not escape Unicode characters
unless required by the \s-1JSON\s0 syntax or other flags.
.PP
.Vb 2
\&  JSON\->new\->latin1\->encode (["\ex{89}\ex{abc}"]
\&  => ["\ex{89}\e\eu0abc"]    # (perl syntax, U+abc escaped, U+89 not)
.Ve
.SS "utf8"
.IX Subsection "utf8"
.Vb 1
\&    $json = $json\->utf8([$enable])
\&    
\&    $enabled = $json\->get_utf8
.Ve
.PP
If \f(CW$enable\fR is true (or missing), then the encode method will encode the \s-1JSON\s0 result
into \s-1UTF\-8\s0, as required by many protocols, while the decode method expects to be handled
an UTF\-8\-encoded string. Please note that UTF\-8\-encoded strings do not contain any
characters outside the range 0..255, they are thus useful for bytewise/binary I/O.
.PP
In future versions, enabling this option might enable autodetection of the \s-1UTF\-16\s0 and \s-1UTF\-32\s0
encoding families, as described in \s-1RFC4627\s0.
.PP
If \f(CW$enable\fR is false, then the encode method will return the \s-1JSON\s0 string as a (non-encoded)
Unicode string, while decode expects thus a Unicode string. Any decoding or encoding
(e.g. to \s-1UTF\-8\s0 or \s-1UTF\-16\s0) needs to be done yourself, e.g. using the Encode module.
.PP
Example, output UTF\-16BE\-encoded \s-1JSON:\s0
.PP
.Vb 2
\&  use Encode;
\&  $jsontext = encode "UTF\-16BE", JSON::XS\->new\->encode ($object);
.Ve
.PP
Example, decode UTF\-32LE\-encoded \s-1JSON:\s0
.PP
.Vb 2
\&  use Encode;
\&  $object = JSON::XS\->new\->decode (decode "UTF\-32LE", $jsontext);
.Ve
.PP
See to \*(L"\s-1UNICODE\s0 \s-1HANDLING\s0 \s-1ON\s0 \s-1PERLS\s0\*(R" in \s-1JSON::PP\s0 if the backend is \s-1PP\s0.
.SS "pretty"
.IX Subsection "pretty"
.Vb 1
\&    $json = $json\->pretty([$enable])
.Ve
.PP
This enables (or disables) all of the \f(CW\*(C`indent\*(C'\fR, \f(CW\*(C`space_before\*(C'\fR and
\&\f(CW\*(C`space_after\*(C'\fR (and in the future possibly more) flags in one call to
generate the most readable (or most compact) form possible.
.PP
Equivalent to:
.PP
.Vb 1
\&   $json\->indent\->space_before\->space_after
.Ve
.PP
The indent space length is three and \s-1JSON::XS\s0 cannot change the indent
space length.
.SS "indent"
.IX Subsection "indent"
.Vb 1
\&    $json = $json\->indent([$enable])
\&    
\&    $enabled = $json\->get_indent
.Ve
.PP
If \f(CW$enable\fR is true (or missing), then the \f(CW\*(C`encode\*(C'\fR method will use a multiline
format as output, putting every array member or object/hash key-value pair
into its own line, identifying them properly.
.PP
If \f(CW$enable\fR is false, no newlines or indenting will be produced, and the
resulting \s-1JSON\s0 text is guaranteed not to contain any \f(CW\*(C`newlines\*(C'\fR.
.PP
This setting has no effect when decoding \s-1JSON\s0 texts.
.PP
The indent space length is three.
With \s-1JSON::PP\s0, you can also access \f(CW\*(C`indent_length\*(C'\fR to change indent space length.
.SS "space_before"
.IX Subsection "space_before"
.Vb 1
\&    $json = $json\->space_before([$enable])
\&    
\&    $enabled = $json\->get_space_before
.Ve
.PP
If \f(CW$enable\fR is true (or missing), then the \f(CW\*(C`encode\*(C'\fR method will add an extra
optional space before the \f(CW\*(C`:\*(C'\fR separating keys from values in \s-1JSON\s0 objects.
.PP
If \f(CW$enable\fR is false, then the \f(CW\*(C`encode\*(C'\fR method will not add any extra
space at those places.
.PP
This setting has no effect when decoding \s-1JSON\s0 texts.
.PP
Example, space_before enabled, space_after and indent disabled:
.PP
.Vb 1
\&   {"key" :"value"}
.Ve
.SS "space_after"
.IX Subsection "space_after"
.Vb 1
\&    $json = $json\->space_after([$enable])
\&    
\&    $enabled = $json\->get_space_after
.Ve
.PP
If \f(CW$enable\fR is true (or missing), then the \f(CW\*(C`encode\*(C'\fR method will add an extra
optional space after the \f(CW\*(C`:\*(C'\fR separating keys from values in \s-1JSON\s0 objects
and extra whitespace after the \f(CW\*(C`,\*(C'\fR separating key-value pairs and array
members.
.PP
If \f(CW$enable\fR is false, then the \f(CW\*(C`encode\*(C'\fR method will not add any extra
space at those places.
.PP
This setting has no effect when decoding \s-1JSON\s0 texts.
.PP
Example, space_before and indent disabled, space_after enabled:
.PP
.Vb 1
\&   {"key": "value"}
.Ve
.SS "relaxed"
.IX Subsection "relaxed"
.Vb 1
\&    $json = $json\->relaxed([$enable])
\&    
\&    $enabled = $json\->get_relaxed
.Ve
.PP
If \f(CW$enable\fR is true (or missing), then \f(CW\*(C`decode\*(C'\fR will accept some
extensions to normal \s-1JSON\s0 syntax (see below). \f(CW\*(C`encode\*(C'\fR will not be
affected in anyway. \fIBe aware that this option makes you accept invalid
\&\s-1JSON\s0 texts as if they were valid!\fR. I suggest only to use this option to
parse application-specific files written by humans (configuration files,
resource files etc.)
.PP
If \f(CW$enable\fR is false (the default), then \f(CW\*(C`decode\*(C'\fR will only accept
valid \s-1JSON\s0 texts.
.PP
Currently accepted extensions are:
.IP "\(bu" 4
list items can have an end-comma
.Sp
\&\s-1JSON\s0 \fIseparates\fR array elements and key-value pairs with commas. This
can be annoying if you write \s-1JSON\s0 texts manually and want to be able to
quickly append elements, so this extension accepts comma at the end of
such items not just between them:
.Sp
.Vb 8
\&   [
\&      1,
\&      2, <\- this comma not normally allowed
\&   ]
\&   {
\&      "k1": "v1",
\&      "k2": "v2", <\- this comma not normally allowed
\&   }
.Ve
.IP "\(bu" 4
shell-style '#'\-comments
.Sp
Whenever \s-1JSON\s0 allows whitespace, shell-style comments are additionally
allowed. They are terminated by the first carriage-return or line-feed
character, after which more white-space and comments are allowed.
.Sp
.Vb 4
\&  [
\&     1, # this comment not allowed in JSON
\&        # neither this one...
\&  ]
.Ve
.SS "canonical"
.IX Subsection "canonical"
.Vb 1
\&    $json = $json\->canonical([$enable])
\&    
\&    $enabled = $json\->get_canonical
.Ve
.PP
If \f(CW$enable\fR is true (or missing), then the \f(CW\*(C`encode\*(C'\fR method will output \s-1JSON\s0 objects
by sorting their keys. This is adding a comparatively high overhead.
.PP
If \f(CW$enable\fR is false, then the \f(CW\*(C`encode\*(C'\fR method will output key-value
pairs in the order Perl stores them (which will likely change between runs
of the same script).
.PP
This option is useful if you want the same data structure to be encoded as
the same \s-1JSON\s0 text (given the same overall settings). If it is disabled,
the same hash might be encoded differently even if contains the same data,
as key-value pairs have no inherent ordering in Perl.
.PP
This setting has no effect when decoding \s-1JSON\s0 texts.
.SS "allow_nonref"
.IX Subsection "allow_nonref"
.Vb 1
\&    $json = $json\->allow_nonref([$enable])
\&    
\&    $enabled = $json\->get_allow_nonref
.Ve
.PP
If \f(CW$enable\fR is true (or missing), then the \f(CW\*(C`encode\*(C'\fR method can convert a
non-reference into its corresponding string, number or null \s-1JSON\s0 value,
which is an extension to \s-1RFC4627\s0. Likewise, \f(CW\*(C`decode\*(C'\fR will accept those \s-1JSON\s0
values instead of croaking.
.PP
If \f(CW$enable\fR is false, then the \f(CW\*(C`encode\*(C'\fR method will croak if it isn't
passed an arrayref or hashref, as \s-1JSON\s0 texts must either be an object
or array. Likewise, \f(CW\*(C`decode\*(C'\fR will croak if given something that is not a
\&\s-1JSON\s0 object or array.
.PP
.Vb 2
\&   JSON\->new\->allow_nonref\->encode ("Hello, World!")
\&   => "Hello, World!"
.Ve
.SS "allow_unknown"
.IX Subsection "allow_unknown"
.Vb 1
\&    $json = $json\->allow_unknown ([$enable])
\&    
\&    $enabled = $json\->get_allow_unknown
.Ve
.PP
If \f(CW$enable\fR is true (or missing), then \*(L"encode\*(R" will *not* throw an
exception when it encounters values it cannot represent in \s-1JSON\s0 (for
example, filehandles) but instead will encode a \s-1JSON\s0 \*(L"null\*(R" value.
Note that blessed objects are not included here and are handled
separately by c<allow_nonref>.
.PP
If \f(CW$enable\fR is false (the default), then \*(L"encode\*(R" will throw an
exception when it encounters anything it cannot encode as \s-1JSON\s0.
.PP
This option does not affect \*(L"decode\*(R" in any way, and it is
recommended to leave it off unless you know your communications
partner.
.SS "allow_blessed"
.IX Subsection "allow_blessed"
.Vb 1
\&    $json = $json\->allow_blessed([$enable])
\&    
\&    $enabled = $json\->get_allow_blessed
.Ve
.PP
If \f(CW$enable\fR is true (or missing), then the \f(CW\*(C`encode\*(C'\fR method will not
barf when it encounters a blessed reference. Instead, the value of the
\&\fBconvert_blessed\fR option will decide whether \f(CW\*(C`null\*(C'\fR (\f(CW\*(C`convert_blessed\*(C'\fR
disabled or no \f(CW\*(C`TO_JSON\*(C'\fR method found) or a representation of the
object (\f(CW\*(C`convert_blessed\*(C'\fR enabled and \f(CW\*(C`TO_JSON\*(C'\fR method found) is being
encoded. Has no effect on \f(CW\*(C`decode\*(C'\fR.
.PP
If \f(CW$enable\fR is false (the default), then \f(CW\*(C`encode\*(C'\fR will throw an
exception when it encounters a blessed object.
.SS "convert_blessed"
.IX Subsection "convert_blessed"
.Vb 1
\&    $json = $json\->convert_blessed([$enable])
\&    
\&    $enabled = $json\->get_convert_blessed
.Ve
.PP
If \f(CW$enable\fR is true (or missing), then \f(CW\*(C`encode\*(C'\fR, upon encountering a
blessed object, will check for the availability of the \f(CW\*(C`TO_JSON\*(C'\fR method
on the object's class. If found, it will be called in scalar context
and the resulting scalar will be encoded instead of the object. If no
\&\f(CW\*(C`TO_JSON\*(C'\fR method is found, the value of \f(CW\*(C`allow_blessed\*(C'\fR will decide what
to do.
.PP
The \f(CW\*(C`TO_JSON\*(C'\fR method may safely call die if it wants. If \f(CW\*(C`TO_JSON\*(C'\fR
returns other blessed objects, those will be handled in the same
way. \f(CW\*(C`TO_JSON\*(C'\fR must take care of not causing an endless recursion cycle
(== crash) in this case. The name of \f(CW\*(C`TO_JSON\*(C'\fR was chosen because other
methods called by the Perl core (== not by the user of the object) are
usually in upper case letters and to avoid collisions with the \f(CW\*(C`to_json\*(C'\fR
function or method.
.PP
This setting does not yet influence \f(CW\*(C`decode\*(C'\fR in any way.
.PP
If \f(CW$enable\fR is false, then the \f(CW\*(C`allow_blessed\*(C'\fR setting will decide what
to do when a blessed object is found.
.IP "convert_blessed_universally mode" 4
.IX Item "convert_blessed_universally mode"
If use \f(CW\*(C`JSON\*(C'\fR with \f(CW\*(C`\-convert_blessed_universally\*(C'\fR, the \f(CW\*(C`UNIVERSAL::TO_JSON\*(C'\fR
subroutine is defined as the below code:
.Sp
.Vb 7
\&   *UNIVERSAL::TO_JSON = sub {
\&       my $b_obj = B::svref_2object( $_[0] );
\&       return    $b_obj\->isa(\*(AqB::HV\*(Aq) ? { %{ $_[0] } }
\&               : $b_obj\->isa(\*(AqB::AV\*(Aq) ? [ @{ $_[0] } ]
\&               : undef
\&               ;
\&   }
.Ve
.Sp
This will cause that \f(CW\*(C`encode\*(C'\fR method converts simple blessed objects into
\&\s-1JSON\s0 objects as non-blessed object.
.Sp
.Vb 2
\&   JSON \-convert_blessed_universally;
\&   $json\->allow_blessed\->convert_blessed\->encode( $blessed_object )
.Ve
.Sp
This feature is experimental and may be removed in the future.
.SS "filter_json_object"
.IX Subsection "filter_json_object"
.Vb 1
\&    $json = $json\->filter_json_object([$coderef])
.Ve
.PP
When \f(CW$coderef\fR is specified, it will be called from \f(CW\*(C`decode\*(C'\fR each
time it decodes a \s-1JSON\s0 object. The only argument passed to the coderef
is a reference to the newly-created hash. If the code references returns
a single scalar (which need not be a reference), this value
(i.e. a copy of that scalar to avoid aliasing) is inserted into the
deserialised data structure. If it returns an empty list
(\s-1NOTE:\s0 \fInot\fR \f(CW\*(C`undef\*(C'\fR, which is a valid scalar), the original deserialised
hash will be inserted. This setting can slow down decoding considerably.
.PP
When \f(CW$coderef\fR is omitted or undefined, any existing callback will
be removed and \f(CW\*(C`decode\*(C'\fR will not change the deserialised hash in any
way.
.PP
Example, convert all \s-1JSON\s0 objects into the integer 5:
.PP
.Vb 6
\&   my $js = JSON\->new\->filter_json_object (sub { 5 });
\&   # returns [5]
\&   $js\->decode (\*(Aq[{}]\*(Aq); # the given subroutine takes a hash reference.
\&   # throw an exception because allow_nonref is not enabled
\&   # so a lone 5 is not allowed.
\&   $js\->decode (\*(Aq{"a":1, "b":2}\*(Aq);
.Ve
.SS "filter_json_single_key_object"
.IX Subsection "filter_json_single_key_object"
.Vb 1
\&    $json = $json\->filter_json_single_key_object($key [=> $coderef])
.Ve
.PP
Works remotely similar to \f(CW\*(C`filter_json_object\*(C'\fR, but is only called for
\&\s-1JSON\s0 objects having a single key named \f(CW$key\fR.
.PP
This \f(CW$coderef\fR is called before the one specified via
\&\f(CW\*(C`filter_json_object\*(C'\fR, if any. It gets passed the single value in the \s-1JSON\s0
object. If it returns a single value, it will be inserted into the data
structure. If it returns nothing (not even \f(CW\*(C`undef\*(C'\fR but the empty list),
the callback from \f(CW\*(C`filter_json_object\*(C'\fR will be called next, as if no
single-key callback were specified.
.PP
If \f(CW$coderef\fR is omitted or undefined, the corresponding callback will be
disabled. There can only ever be one callback for a given key.
.PP
As this callback gets called less often then the \f(CW\*(C`filter_json_object\*(C'\fR
one, decoding speed will not usually suffer as much. Therefore, single-key
objects make excellent targets to serialise Perl objects into, especially
as single-key \s-1JSON\s0 objects are as close to the type-tagged value concept
as \s-1JSON\s0 gets (it's basically an \s-1ID/VALUE\s0 tuple). Of course, \s-1JSON\s0 does not
support this in any way, so you need to make sure your data never looks
like a serialised Perl hash.
.PP
Typical names for the single object key are \f(CW\*(C`_\|_class_whatever_\|_\*(C'\fR, or
\&\f(CW\*(C`$_\|_dollars_are_rarely_used_\|_$\*(C'\fR or \f(CW\*(C`}ugly_brace_placement\*(C'\fR, or even
things like \f(CW\*(C`_\|_class_md5sum(classname)_\|_\*(C'\fR, to reduce the risk of clashing
with real hashes.
.PP
Example, decode \s-1JSON\s0 objects of the form \f(CW\*(C`{ "_\|_widget_\|_" => <id> }\*(C'\fR
into the corresponding \f(CW$WIDGET{<id>}\fR object:
.PP
.Vb 7
\&   # return whatever is in $WIDGET{5}:
\&   JSON
\&      \->new
\&      \->filter_json_single_key_object (_\|_widget_\|_ => sub {
\&            $WIDGET{ $_[0] }
\&         })
\&      \->decode (\*(Aq{"_\|_widget_\|_": 5\*(Aq)
\&
\&   # this can be used with a TO_JSON method in some "widget" class
\&   # for serialisation to json:
\&   sub WidgetBase::TO_JSON {
\&      my ($self) = @_;
\&
\&      unless ($self\->{id}) {
\&         $self\->{id} = ..get..some..id..;
\&         $WIDGET{$self\->{id}} = $self;
\&      }
\&
\&      { _\|_widget_\|_ => $self\->{id} }
\&   }
.Ve
.SS "shrink"
.IX Subsection "shrink"
.Vb 1
\&    $json = $json\->shrink([$enable])
\&    
\&    $enabled = $json\->get_shrink
.Ve
.PP
With \s-1JSON::XS\s0, this flag resizes strings generated by either
\&\f(CW\*(C`encode\*(C'\fR or \f(CW\*(C`decode\*(C'\fR to their minimum size possible. This can save
memory when your \s-1JSON\s0 texts are either very very long or you have many
short strings. It will also try to downgrade any strings to octet-form
if possible: perl stores strings internally either in an encoding called
UTF-X or in octet-form. The latter cannot store everything but uses less
space in general (and some buggy Perl or C code might even rely on that
internal representation being used).
.PP
With \s-1JSON::PP\s0, it is noop about resizing strings but tries
\&\f(CW\*(C`utf8::downgrade\*(C'\fR to the returned string by \f(CW\*(C`encode\*(C'\fR. See to utf8.
.PP
See to \*(L"OBJECT-ORIENTED \s-1INTERFACE\s0\*(R" in \s-1JSON::XS\s0 and \*(L"\s-1METHODS\s0\*(R" in \s-1JSON::PP\s0.
.SS "max_depth"
.IX Subsection "max_depth"
.Vb 1
\&    $json = $json\->max_depth([$maximum_nesting_depth])
\&    
\&    $max_depth = $json\->get_max_depth
.Ve
.PP
Sets the maximum nesting level (default \f(CW512\fR) accepted while encoding
or decoding. If a higher nesting level is detected in \s-1JSON\s0 text or a Perl
data structure, then the encoder and decoder will stop and croak at that
point.
.PP
Nesting level is defined by number of hash\- or arrayrefs that the encoder
needs to traverse to reach a given point or the number of \f(CW\*(C`{\*(C'\fR or \f(CW\*(C`[\*(C'\fR
characters without their matching closing parenthesis crossed to reach a
given character in a string.
.PP
If no argument is given, the highest possible setting will be used, which
is rarely useful.
.PP
Note that nesting is implemented by recursion in C. The default value has
been chosen to be as large as typical operating systems allow without
crashing. (\s-1JSON::XS\s0)
.PP
With \s-1JSON::PP\s0 as the backend, when a large value (100 or more) was set and
it de/encodes a deep nested object/text, it may raise a warning
\&'Deep recursion on subroutine' at the perl runtime phase.
.PP
See \*(L"\s-1SECURITY\s0 \s-1CONSIDERATIONS\s0\*(R" in \s-1JSON::XS\s0 for more info on why this is useful.
.SS "max_size"
.IX Subsection "max_size"
.Vb 1
\&    $json = $json\->max_size([$maximum_string_size])
\&    
\&    $max_size = $json\->get_max_size
.Ve
.PP
Set the maximum length a \s-1JSON\s0 text may have (in bytes) where decoding is
being attempted. The default is \f(CW0\fR, meaning no limit. When \f(CW\*(C`decode\*(C'\fR
is called on a string that is longer then this many bytes, it will not
attempt to decode the string but throw an exception. This setting has no
effect on \f(CW\*(C`encode\*(C'\fR (yet).
.PP
If no argument is given, the limit check will be deactivated (same as when
\&\f(CW0\fR is specified).
.PP
See \*(L"\s-1SECURITY\s0 \s-1CONSIDERATIONS\s0\*(R" in \s-1JSON::XS\s0, below, for more info on why this is useful.
.SS "encode"
.IX Subsection "encode"
.Vb 1
\&    $json_text = $json\->encode($perl_scalar)
.Ve
.PP
Converts the given Perl data structure (a simple scalar or a reference
to a hash or array) to its \s-1JSON\s0 representation. Simple scalars will be
converted into \s-1JSON\s0 string or number sequences, while references to arrays
become \s-1JSON\s0 arrays and references to hashes become \s-1JSON\s0 objects. Undefined
Perl values (e.g. \f(CW\*(C`undef\*(C'\fR) become \s-1JSON\s0 \f(CW\*(C`null\*(C'\fR values.
References to the integers \f(CW0\fR and \f(CW1\fR are converted into \f(CW\*(C`true\*(C'\fR and \f(CW\*(C`false\*(C'\fR.
.SS "decode"
.IX Subsection "decode"
.Vb 1
\&    $perl_scalar = $json\->decode($json_text)
.Ve
.PP
The opposite of \f(CW\*(C`encode\*(C'\fR: expects a \s-1JSON\s0 text and tries to parse it,
returning the resulting simple scalar or reference. Croaks on error.
.PP
\&\s-1JSON\s0 numbers and strings become simple Perl scalars. \s-1JSON\s0 arrays become
Perl arrayrefs and \s-1JSON\s0 objects become Perl hashrefs. \f(CW\*(C`true\*(C'\fR becomes
\&\f(CW1\fR (\f(CW\*(C`JSON::true\*(C'\fR), \f(CW\*(C`false\*(C'\fR becomes \f(CW0\fR (\f(CW\*(C`JSON::false\*(C'\fR) and
\&\f(CW\*(C`null\*(C'\fR becomes \f(CW\*(C`undef\*(C'\fR.
.SS "decode_prefix"
.IX Subsection "decode_prefix"
.Vb 1
\&    ($perl_scalar, $characters) = $json\->decode_prefix($json_text)
.Ve
.PP
This works like the \f(CW\*(C`decode\*(C'\fR method, but instead of raising an exception
when there is trailing garbage after the first \s-1JSON\s0 object, it will
silently stop parsing there and return the number of characters consumed
so far.
.PP
.Vb 2
\&   JSON\->new\->decode_prefix ("[1] the tail")
\&   => ([], 3)
.Ve
.PP
See to \*(L"OBJECT-ORIENTED \s-1INTERFACE\s0\*(R" in \s-1JSON::XS\s0
.SS "property"
.IX Subsection "property"
.Vb 1
\&    $boolean = $json\->property($property_name)
.Ve
.PP
Returns a boolean value about above some properties.
.PP
The available properties are \f(CW\*(C`ascii\*(C'\fR, \f(CW\*(C`latin1\*(C'\fR, \f(CW\*(C`utf8\*(C'\fR,
\&\f(CW\*(C`indent\*(C'\fR,\f(CW\*(C`space_before\*(C'\fR, \f(CW\*(C`space_after\*(C'\fR, \f(CW\*(C`relaxed\*(C'\fR, \f(CW\*(C`canonical\*(C'\fR,
\&\f(CW\*(C`allow_nonref\*(C'\fR, \f(CW\*(C`allow_unknown\*(C'\fR, \f(CW\*(C`allow_blessed\*(C'\fR, \f(CW\*(C`convert_blessed\*(C'\fR,
\&\f(CW\*(C`shrink\*(C'\fR, \f(CW\*(C`max_depth\*(C'\fR and \f(CW\*(C`max_size\*(C'\fR.
.PP
.Vb 5
\&   $boolean = $json\->property(\*(Aqutf8\*(Aq);
\&    => 0
\&   $json\->utf8;
\&   $boolean = $json\->property(\*(Aqutf8\*(Aq);
\&    => 1
.Ve
.PP
Sets the property with a given boolean value.
.PP
.Vb 1
\&    $json = $json\->property($property_name => $boolean);
.Ve
.PP
With no argument, it returns all the above properties as a hash reference.
.PP
.Vb 1
\&    $flag_hashref = $json\->property();
.Ve
.SH "INCREMENTAL PARSING"
.IX Header "INCREMENTAL PARSING"
Most of this section are copied and modified from \*(L"\s-1INCREMENTAL\s0 \s-1PARSING\s0\*(R" in \s-1JSON::XS\s0.
.PP
In some cases, there is the need for incremental parsing of \s-1JSON\s0 texts.
This module does allow you to parse a \s-1JSON\s0 stream incrementally.
It does so by accumulating text until it has a full \s-1JSON\s0 object, which
it then can decode. This process is similar to using \f(CW\*(C`decode_prefix\*(C'\fR
to see if a full \s-1JSON\s0 object is available, but is much more efficient
(and can be implemented with a minimum of method calls).
.PP
The backend module will only attempt to parse the \s-1JSON\s0 text once it is sure it
has enough text to get a decisive result, using a very simple but
truly incremental parser. This means that it sometimes won't stop as
early as the full parser, for example, it doesn't detect parenthesis
mismatches. The only thing it guarantees is that it starts decoding as
soon as a syntactically valid \s-1JSON\s0 text has been seen. This means you need
to set resource limits (e.g. \f(CW\*(C`max_size\*(C'\fR) to ensure the parser will stop
parsing in the presence if syntax errors.
.PP
The following methods implement this incremental parser.
.SS "incr_parse"
.IX Subsection "incr_parse"
.Vb 1
\&    $json\->incr_parse( [$string] ) # void context
\&    
\&    $obj_or_undef = $json\->incr_parse( [$string] ) # scalar context
\&    
\&    @obj_or_empty = $json\->incr_parse( [$string] ) # list context
.Ve
.PP
This is the central parsing function. It can both append new text and
extract objects from the stream accumulated so far (both of these
functions are optional).
.PP
If \f(CW$string\fR is given, then this string is appended to the already
existing \s-1JSON\s0 fragment stored in the \f(CW$json\fR object.
.PP
After that, if the function is called in void context, it will simply
return without doing anything further. This can be used to add more text
in as many chunks as you want.
.PP
If the method is called in scalar context, then it will try to extract
exactly \fIone\fR \s-1JSON\s0 object. If that is successful, it will return this
object, otherwise it will return \f(CW\*(C`undef\*(C'\fR. If there is a parse error,
this method will croak just as \f(CW\*(C`decode\*(C'\fR would do (one can then use
\&\f(CW\*(C`incr_skip\*(C'\fR to skip the erroneous part). This is the most common way of
using the method.
.PP
And finally, in list context, it will try to extract as many objects
from the stream as it can find and return them, or the empty list
otherwise. For this to work, there must be no separators between the \s-1JSON\s0
objects or arrays, instead they must be concatenated back-to-back. If
an error occurs, an exception will be raised as in the scalar context
case. Note that in this case, any previously-parsed \s-1JSON\s0 texts will be
lost.
.PP
Example: Parse some \s-1JSON\s0 arrays/objects in a given string and return them.
.PP
.Vb 1
\&    my @objs = JSON\->new\->incr_parse ("[5][7][1,2]");
.Ve
.SS "incr_text"
.IX Subsection "incr_text"
.Vb 1
\&    $lvalue_string = $json\->incr_text
.Ve
.PP
This method returns the currently stored \s-1JSON\s0 fragment as an lvalue, that
is, you can manipulate it. This \fIonly\fR works when a preceding call to
\&\f(CW\*(C`incr_parse\*(C'\fR in \fIscalar context\fR successfully returned an object. Under
all other circumstances you must not call this function (I mean it.
although in simple tests it might actually work, it \fIwill\fR fail under
real world conditions). As a special exception, you can also call this
method before having parsed anything.
.PP
This function is useful in two cases: a) finding the trailing text after a
\&\s-1JSON\s0 object or b) parsing multiple \s-1JSON\s0 objects separated by non-JSON text
(such as commas).
.PP
.Vb 1
\&    $json\->incr_text =~ s/\es*,\es*//;
.Ve
.PP
In Perl 5.005, \f(CW\*(C`lvalue\*(C'\fR attribute is not available.
You must write codes like the below:
.PP
.Vb 3
\&    $string = $json\->incr_text;
\&    $string =~ s/\es*,\es*//;
\&    $json\->incr_text( $string );
.Ve
.SS "incr_skip"
.IX Subsection "incr_skip"
.Vb 1
\&    $json\->incr_skip
.Ve
.PP
This will reset the state of the incremental parser and will remove the
parsed text from the input buffer. This is useful after \f(CW\*(C`incr_parse\*(C'\fR
died, in which case the input buffer and incremental parser state is left
unchanged, to skip the text parsed so far and to reset the parse state.
.SS "incr_reset"
.IX Subsection "incr_reset"
.Vb 1
\&    $json\->incr_reset
.Ve
.PP
This completely resets the incremental parser, that is, after this call,
it will be as if the parser had never parsed anything.
.PP
This is useful if you want to repeatedly parse \s-1JSON\s0 objects and want to
ignore any trailing data, which means you have to reset the parser after
each successful decode.
.PP
See to \*(L"\s-1INCREMENTAL\s0 \s-1PARSING\s0\*(R" in \s-1JSON::XS\s0 for examples.
.SH "JSON::PP SUPPORT METHODS"
.IX Header "JSON::PP SUPPORT METHODS"
The below methods are \s-1JSON::PP\s0 own methods, so when \f(CW\*(C`JSON\*(C'\fR works
with \s-1JSON::PP\s0 (i.e. the created object is a \s-1JSON::PP\s0 object), available.
See to \*(L"\s-1JSON::PP\s0 \s-1OWN\s0 \s-1METHODS\s0\*(R" in \s-1JSON::PP\s0 in detail.
.PP
If you use \f(CW\*(C`JSON\*(C'\fR with additional \f(CW\*(C`\-support_by_pp\*(C'\fR, some methods
are available even with \s-1JSON::XS\s0. See to \*(L"\s-1USE\s0 \s-1PP\s0 \s-1FEATURES\s0 \s-1EVEN\s0 \s-1THOUGH\s0 \s-1XS\s0 \s-1BACKEND\s0\*(R".
.PP
.Vb 1
\&   BEING { $ENV{PERL_JSON_BACKEND} = \*(AqJSON::XS\*(Aq }
\&   
\&   use JSON \-support_by_pp;
\&   
\&   my $json = JSON\->new;
\&   $json\->allow_nonref\->escape_slash\->encode("/");
\&
\&   # functional interfaces too.
\&   print to_json(["/"], {escape_slash => 1});
\&   print from_json(\*(Aq["foo"]\*(Aq, {utf8 => 1});
.Ve
.PP
If you do not want to all functions but \f(CW\*(C`\-support_by_pp\*(C'\fR,
use \f(CW\*(C`\-no_export\*(C'\fR.
.PP
.Vb 2
\&   use JSON \-support_by_pp, \-no_export;
\&   # functional interfaces are not exported.
.Ve
.SS "allow_singlequote"
.IX Subsection "allow_singlequote"
.Vb 1
\&    $json = $json\->allow_singlequote([$enable])
.Ve
.PP
If \f(CW$enable\fR is true (or missing), then \f(CW\*(C`decode\*(C'\fR will accept
any \s-1JSON\s0 strings quoted by single quotations that are invalid \s-1JSON\s0
format.
.PP
.Vb 3
\&    $json\->allow_singlequote\->decode({"foo":\*(Aqbar\*(Aq});
\&    $json\->allow_singlequote\->decode({\*(Aqfoo\*(Aq:"bar"});
\&    $json\->allow_singlequote\->decode({\*(Aqfoo\*(Aq:\*(Aqbar\*(Aq});
.Ve
.PP
As same as the \f(CW\*(C`relaxed\*(C'\fR option, this option may be used to parse
application-specific files written by humans.
.SS "allow_barekey"
.IX Subsection "allow_barekey"
.Vb 1
\&    $json = $json\->allow_barekey([$enable])
.Ve
.PP
If \f(CW$enable\fR is true (or missing), then \f(CW\*(C`decode\*(C'\fR will accept
bare keys of \s-1JSON\s0 object that are invalid \s-1JSON\s0 format.
.PP
As same as the \f(CW\*(C`relaxed\*(C'\fR option, this option may be used to parse
application-specific files written by humans.
.PP
.Vb 1
\&    $json\->allow_barekey\->decode(\*(Aq{foo:"bar"}\*(Aq);
.Ve
.SS "allow_bignum"
.IX Subsection "allow_bignum"
.Vb 1
\&    $json = $json\->allow_bignum([$enable])
.Ve
.PP
If \f(CW$enable\fR is true (or missing), then \f(CW\*(C`decode\*(C'\fR will convert
the big integer Perl cannot handle as integer into a Math::BigInt
object and convert a floating number (any) into a Math::BigFloat.
.PP
On the contrary, \f(CW\*(C`encode\*(C'\fR converts \f(CW\*(C`Math::BigInt\*(C'\fR objects and \f(CW\*(C`Math::BigFloat\*(C'\fR
objects into \s-1JSON\s0 numbers with \f(CW\*(C`allow_blessed\*(C'\fR enable.
.PP
.Vb 4
\&   $json\->allow_nonref\->allow_blessed\->allow_bignum;
\&   $bigfloat = $json\->decode(\*(Aq2.000000000000000000000000001\*(Aq);
\&   print $json\->encode($bigfloat);
\&   # => 2.000000000000000000000000001
.Ve
.PP
See to \s-1MAPPING\s0 about the conversion of \s-1JSON\s0 number.
.SS "loose"
.IX Subsection "loose"
.Vb 1
\&    $json = $json\->loose([$enable])
.Ve
.PP
The unescaped [\ex00\-\ex1f\ex22\ex2f\ex5c] strings are invalid in \s-1JSON\s0 strings
and the module doesn't allow to \f(CW\*(C`decode\*(C'\fR to these (except for \ex2f).
If \f(CW$enable\fR is true (or missing), then \f(CW\*(C`decode\*(C'\fR  will accept these
unescaped strings.
.PP
.Vb 2
\&    $json\->loose\->decode(qq|["abc
\&                                   def"]|);
.Ve
.PP
See to \*(L"\s-1JSON::PP\s0 \s-1OWN\s0 \s-1METHODS\s0\*(R" in \s-1JSON::PP\s0.
.SS "escape_slash"
.IX Subsection "escape_slash"
.Vb 1
\&    $json = $json\->escape_slash([$enable])
.Ve
.PP
According to \s-1JSON\s0 Grammar, \fIslash\fR (U+002F) is escaped. But by default
\&\s-1JSON\s0 backend modules encode strings without escaping slash.
.PP
If \f(CW$enable\fR is true (or missing), then \f(CW\*(C`encode\*(C'\fR will escape slashes.
.SS "indent_length"
.IX Subsection "indent_length"
.Vb 1
\&    $json = $json\->indent_length($length)
.Ve
.PP
With \s-1JSON::XS\s0, The indent space length is 3 and cannot be changed.
With \s-1JSON::PP\s0, it sets the indent space length with the given \f(CW$length\fR.
The default is 3. The acceptable range is 0 to 15.
.SS "sort_by"
.IX Subsection "sort_by"
.Vb 2
\&    $json = $json\->sort_by($function_name)
\&    $json = $json\->sort_by($subroutine_ref)
.Ve
.PP
If \f(CW$function_name\fR or \f(CW$subroutine_ref\fR are set, its sort routine are used.
.PP
.Vb 2
\&   $js = $pc\->sort_by(sub { $JSON::PP::a cmp $JSON::PP::b })\->encode($obj);
\&   # is($js, q|{"a":1,"b":2,"c":3,"d":4,"e":5,"f":6,"g":7,"h":8,"i":9}|);
\&
\&   $js = $pc\->sort_by(\*(Aqown_sort\*(Aq)\->encode($obj);
\&   # is($js, q|{"a":1,"b":2,"c":3,"d":4,"e":5,"f":6,"g":7,"h":8,"i":9}|);
\&
\&   sub JSON::PP::own_sort { $JSON::PP::a cmp $JSON::PP::b }
.Ve
.PP
As the sorting routine runs in the \s-1JSON::PP\s0 scope, the given
subroutine name and the special variables \f(CW$a\fR, \f(CW$b\fR will begin
with '\s-1JSON::PP::\s0'.
.PP
If \f(CW$integer\fR is set, then the effect is same as \f(CW\*(C`canonical\*(C'\fR on.
.PP
See to \*(L"\s-1JSON::PP\s0 \s-1OWN\s0 \s-1METHODS\s0\*(R" in \s-1JSON::PP\s0.
.SH "MAPPING"
.IX Header "MAPPING"
This section is copied from \s-1JSON::XS\s0 and modified to \f(CW\*(C`JSON\*(C'\fR.
\&\s-1JSON::XS\s0 and \s-1JSON::PP\s0 mapping mechanisms are almost equivalent.
.PP
See to \*(L"\s-1MAPPING\s0\*(R" in \s-1JSON::XS\s0.
.SS "\s-1JSON\s0 \-> \s-1PERL\s0"
.IX Subsection "JSON -> PERL"
.IP "object" 4
.IX Item "object"
A \s-1JSON\s0 object becomes a reference to a hash in Perl. No ordering of object
keys is preserved (\s-1JSON\s0 does not preserver object key ordering itself).
.IP "array" 4
.IX Item "array"
A \s-1JSON\s0 array becomes a reference to an array in Perl.
.IP "string" 4
.IX Item "string"
A \s-1JSON\s0 string becomes a string scalar in Perl \- Unicode codepoints in \s-1JSON\s0
are represented by the same codepoints in the Perl string, so no manual
decoding is necessary.
.IP "number" 4
.IX Item "number"
A \s-1JSON\s0 number becomes either an integer, numeric (floating point) or
string scalar in perl, depending on its range and any fractional parts. On
the Perl level, there is no difference between those as Perl handles all
the conversion details, but an integer may take slightly less memory and
might represent more values exactly than floating point numbers.
.Sp
If the number consists of digits only, \f(CW\*(C`JSON\*(C'\fR will try to represent
it as an integer value. If that fails, it will try to represent it as
a numeric (floating point) value if that is possible without loss of
precision. Otherwise it will preserve the number as a string value (in
which case you lose roundtripping ability, as the \s-1JSON\s0 number will be
re-encoded to a \s-1JSON\s0 string).
.Sp
Numbers containing a fractional or exponential part will always be
represented as numeric (floating point) values, possibly at a loss of
precision (in which case you might lose perfect roundtripping ability, but
the \s-1JSON\s0 number will still be re-encoded as a \s-1JSON\s0 number).
.Sp
Note that precision is not accuracy \- binary floating point values cannot
represent most decimal fractions exactly, and when converting from and to
floating point, \f(CW\*(C`JSON\*(C'\fR only guarantees precision up to but not including
the least significant bit.
.Sp
If the backend is \s-1JSON::PP\s0 and \f(CW\*(C`allow_bignum\*(C'\fR is enable, the big integers 
and the numeric can be optionally converted into Math::BigInt and
Math::BigFloat objects.
.IP "true, false" 4
.IX Item "true, false"
These \s-1JSON\s0 atoms become \f(CW\*(C`JSON::true\*(C'\fR and \f(CW\*(C`JSON::false\*(C'\fR,
respectively. They are overloaded to act almost exactly like the numbers
\&\f(CW1\fR and \f(CW0\fR. You can check whether a scalar is a \s-1JSON\s0 boolean by using
the \f(CW\*(C`JSON::is_bool\*(C'\fR function.
.Sp
If \f(CW\*(C`JSON::true\*(C'\fR and \f(CW\*(C`JSON::false\*(C'\fR are used as strings or compared as strings,
they represent as \f(CW\*(C`true\*(C'\fR and \f(CW\*(C`false\*(C'\fR respectively.
.Sp
.Vb 4
\&   print JSON::true . "\en";
\&    => true
\&   print JSON::true + 1;
\&    => 1
\&
\&   ok(JSON::true eq \*(Aqtrue\*(Aq);
\&   ok(JSON::true eq  \*(Aq1\*(Aq);
\&   ok(JSON::true == 1);
.Ve
.Sp
\&\f(CW\*(C`JSON\*(C'\fR will install these missing overloading features to the backend modules.
.IP "null" 4
.IX Item "null"
A \s-1JSON\s0 null atom becomes \f(CW\*(C`undef\*(C'\fR in Perl.
.Sp
\&\f(CW\*(C`JSON::null\*(C'\fR returns \f(CW\*(C`undef\*(C'\fR.
.SS "\s-1PERL\s0 \-> \s-1JSON\s0"
.IX Subsection "PERL -> JSON"
The mapping from Perl to \s-1JSON\s0 is slightly more difficult, as Perl is a
truly typeless language, so we can only guess which \s-1JSON\s0 type is meant by
a Perl value.
.IP "hash references" 4
.IX Item "hash references"
Perl hash references become \s-1JSON\s0 objects. As there is no inherent ordering
in hash keys (or \s-1JSON\s0 objects), they will usually be encoded in a
pseudo-random order that can change between runs of the same program but
stays generally the same within a single run of a program. \f(CW\*(C`JSON\*(C'\fR
optionally sort the hash keys (determined by the \fIcanonical\fR flag), so
the same data structure will serialise to the same \s-1JSON\s0 text (given same
settings and version of \s-1JSON::XS\s0), but this incurs a runtime overhead
and is only rarely useful, e.g. when you want to compare some \s-1JSON\s0 text
against another for equality.
.Sp
In future, the ordered object feature will be added to \s-1JSON::PP\s0 using \f(CW\*(C`tie\*(C'\fR mechanism.
.IP "array references" 4
.IX Item "array references"
Perl array references become \s-1JSON\s0 arrays.
.IP "other references" 4
.IX Item "other references"
Other unblessed references are generally not allowed and will cause an
exception to be thrown, except for references to the integers \f(CW0\fR and
\&\f(CW1\fR, which get turned into \f(CW\*(C`false\*(C'\fR and \f(CW\*(C`true\*(C'\fR atoms in \s-1JSON\s0. You can
also use \f(CW\*(C`JSON::false\*(C'\fR and \f(CW\*(C`JSON::true\*(C'\fR to improve readability.
.Sp
.Vb 1
\&   to_json [\e0,JSON::true]      # yields [false,true]
.Ve
.IP "JSON::true, JSON::false, JSON::null" 4
.IX Item "JSON::true, JSON::false, JSON::null"
These special values become \s-1JSON\s0 true and \s-1JSON\s0 false values,
respectively. You can also use \f(CW\*(C`\e1\*(C'\fR and \f(CW\*(C`\e0\*(C'\fR directly if you want.
.Sp
JSON::null returns \f(CW\*(C`undef\*(C'\fR.
.IP "blessed objects" 4
.IX Item "blessed objects"
Blessed objects are not directly representable in \s-1JSON\s0. See the
\&\f(CW\*(C`allow_blessed\*(C'\fR and \f(CW\*(C`convert_blessed\*(C'\fR methods on various options on
how to deal with this: basically, you can choose between throwing an
exception, encoding the reference as if it weren't blessed, or provide
your own serialiser method.
.Sp
With \f(CW\*(C`convert_blessed_universally\*(C'\fR mode,  \f(CW\*(C`encode\*(C'\fR converts blessed
hash references or blessed array references (contains other blessed references)
into \s-1JSON\s0 members and arrays.
.Sp
.Vb 2
\&   use JSON \-convert_blessed_universally;
\&   JSON\->new\->allow_blessed\->convert_blessed\->encode( $blessed_object );
.Ve
.Sp
See to convert_blessed.
.IP "simple scalars" 4
.IX Item "simple scalars"
Simple Perl scalars (any scalar that is not a reference) are the most
difficult objects to encode: \s-1JSON::XS\s0 and \s-1JSON::PP\s0 will encode undefined scalars as
\&\s-1JSON\s0 \f(CW\*(C`null\*(C'\fR values, scalars that have last been used in a string context
before encoding as \s-1JSON\s0 strings, and anything else as number value:
.Sp
.Vb 4
\&   # dump as number
\&   encode_json [2]                      # yields [2]
\&   encode_json [\-3.0e17]                # yields [\-3e+17]
\&   my $value = 5; encode_json [$value]  # yields [5]
\&
\&   # used as string, so dump as string
\&   print $value;
\&   encode_json [$value]                 # yields ["5"]
\&
\&   # undef becomes null
\&   encode_json [undef]                  # yields [null]
.Ve
.Sp
You can force the type to be a string by stringifying it:
.Sp
.Vb 4
\&   my $x = 3.1; # some variable containing a number
\&   "$x";        # stringified
\&   $x .= "";    # another, more awkward way to stringify
\&   print $x;    # perl does it for you, too, quite often
.Ve
.Sp
You can force the type to be a number by numifying it:
.Sp
.Vb 3
\&   my $x = "3"; # some variable containing a string
\&   $x += 0;     # numify it, ensuring it will be dumped as a number
\&   $x *= 1;     # same thing, the choice is yours.
.Ve
.Sp
You can not currently force the type in other, less obscure, ways.
.Sp
Note that numerical precision has the same meaning as under Perl (so
binary to decimal conversion follows the same rules as in Perl, which
can differ to other languages). Also, your perl interpreter might expose
extensions to the floating point numbers of your platform, such as
infinities or NaN's \- these cannot be represented in \s-1JSON\s0, and it is an
error to pass those in.
.IP "Big Number" 4
.IX Item "Big Number"
If the backend is \s-1JSON::PP\s0 and \f(CW\*(C`allow_bignum\*(C'\fR is enable, 
\&\f(CW\*(C`encode\*(C'\fR converts \f(CW\*(C`Math::BigInt\*(C'\fR objects and \f(CW\*(C`Math::BigFloat\*(C'\fR
objects into \s-1JSON\s0 numbers.
.SH "JSON and ECMAscript"
.IX Header "JSON and ECMAscript"
See to \*(L"\s-1JSON\s0 and ECMAscript\*(R" in \s-1JSON::XS\s0.
.SH "JSON and YAML"
.IX Header "JSON and YAML"
\&\s-1JSON\s0 is not a subset of \s-1YAML\s0.
See to \*(L"\s-1JSON\s0 and \s-1YAML\s0\*(R" in \s-1JSON::XS\s0.
.SH "BACKEND MODULE DECISION"
.IX Header "BACKEND MODULE DECISION"
When you use \f(CW\*(C`JSON\*(C'\fR, \f(CW\*(C`JSON\*(C'\fR tries to \f(CW\*(C`use\*(C'\fR \s-1JSON::XS\s0. If this call failed, it will
\&\f(CW\*(C`uses\*(C'\fR \s-1JSON::PP\s0. The required \s-1JSON::XS\s0 version is \fI2.2\fR or later.
.PP
The \f(CW\*(C`JSON\*(C'\fR constructor method returns an object inherited from the backend module,
and \s-1JSON::XS\s0 object is a blessed scalar reference while \s-1JSON::PP\s0 is a blessed hash
reference.
.PP
So, your program should not depend on the backend module, especially
returned objects should not be modified.
.PP
.Vb 2
\& my $json = JSON\->new; # XS or PP?
\& $json\->{stash} = \*(Aqthis is xs object\*(Aq; # this code may raise an error!
.Ve
.PP
To check the backend module, there are some methods \- \f(CW\*(C`backend\*(C'\fR, \f(CW\*(C`is_pp\*(C'\fR and \f(CW\*(C`is_xs\*(C'\fR.
.PP
.Vb 1
\&  JSON\->backend; # \*(AqJSON::XS\*(Aq or \*(AqJSON::PP\*(Aq
\&  
\&  JSON\->backend\->is_pp: # 0 or 1
\&  
\&  JSON\->backend\->is_xs: # 1 or 0
\&  
\&  $json\->is_xs; # 1 or 0
\&  
\&  $json\->is_pp; # 0 or 1
.Ve
.PP
If you set an environment variable \f(CW\*(C`PERL_JSON_BACKEND\*(C'\fR, the calling action will be changed.
.IP "\s-1PERL_JSON_BACKEND\s0 = 0 or \s-1PERL_JSON_BACKEND\s0 = '\s-1JSON::PP\s0'" 4
.IX Item "PERL_JSON_BACKEND = 0 or PERL_JSON_BACKEND = 'JSON::PP'"
Always use \s-1JSON::PP\s0
.IP "\s-1PERL_JSON_BACKEND\s0 == 1 or \s-1PERL_JSON_BACKEND\s0 = '\s-1JSON::XS\s0,JSON::PP'" 4
.IX Item "PERL_JSON_BACKEND == 1 or PERL_JSON_BACKEND = 'JSON::XS,JSON::PP'"
(The default) Use compiled \s-1JSON::XS\s0 if it is properly compiled & installed,
otherwise use \s-1JSON::PP\s0.
.IP "\s-1PERL_JSON_BACKEND\s0 == 2 or \s-1PERL_JSON_BACKEND\s0 = '\s-1JSON::XS\s0'" 4
.IX Item "PERL_JSON_BACKEND == 2 or PERL_JSON_BACKEND = 'JSON::XS'"
Always use compiled \s-1JSON::XS\s0, die if it isn't properly compiled & installed.
.IP "\s-1PERL_JSON_BACKEND\s0 = 'JSON::backportPP'" 4
.IX Item "PERL_JSON_BACKEND = 'JSON::backportPP'"
Always use JSON::backportPP.
JSON::backportPP is \s-1JSON::PP\s0 back port module.
\&\f(CW\*(C`JSON\*(C'\fR includes JSON::backportPP instead of \s-1JSON::PP\s0.
.PP
These ideas come from DBI::PurePerl mechanism.
.PP
example:
.PP
.Vb 2
\& BEGIN { $ENV{PERL_JSON_BACKEND} = \*(AqJSON::PP\*(Aq }
\& use JSON; # always uses JSON::PP
.Ve
.PP
In future, it may be able to specify another module.
.SH "USE PP FEATURES EVEN THOUGH XS BACKEND"
.IX Header "USE PP FEATURES EVEN THOUGH XS BACKEND"
Many methods are available with either \s-1JSON::XS\s0 or \s-1JSON::PP\s0 and
when the backend module is \s-1JSON::XS\s0, if any \s-1JSON::PP\s0 specific (i.e. \s-1JSON::XS\s0 unsupported)
method is called, it will \f(CW\*(C`warn\*(C'\fR and be noop.
.PP
But If you \f(CW\*(C`use\*(C'\fR \f(CW\*(C`JSON\*(C'\fR passing the optional string \f(CW\*(C`\-support_by_pp\*(C'\fR,
it makes a part of those unsupported methods available.
This feature is achieved by using \s-1JSON::PP\s0 in \f(CW\*(C`de/encode\*(C'\fR.
.PP
.Vb 4
\&   BEGIN { $ENV{PERL_JSON_BACKEND} = 2 } # with JSON::XS
\&   use JSON \-support_by_pp;
\&   my $json = JSON\->new;
\&   $json\->allow_nonref\->escape_slash\->encode("/");
.Ve
.PP
At this time, the returned object is a \f(CW\*(C`JSON::Backend::XS::Supportable\*(C'\fR
object (re-blessed \s-1XS\s0 object), and  by checking \s-1JSON::XS\s0 unsupported flags
in de/encoding, can support some unsupported methods \- \f(CW\*(C`loose\*(C'\fR, \f(CW\*(C`allow_bignum\*(C'\fR,
\&\f(CW\*(C`allow_barekey\*(C'\fR, \f(CW\*(C`allow_singlequote\*(C'\fR, \f(CW\*(C`escape_slash\*(C'\fR and \f(CW\*(C`indent_length\*(C'\fR.
.PP
When any unsupported methods are not enable, \f(CW\*(C`XS de/encode\*(C'\fR will be
used as is. The switch is achieved by changing the symbolic tables.
.PP
\&\f(CW\*(C`\-support_by_pp\*(C'\fR is effective only when the backend module is \s-1JSON::XS\s0
and it makes the de/encoding speed down a bit.
.PP
See to \*(L"\s-1JSON::PP\s0 \s-1SUPPORT\s0 \s-1METHODS\s0\*(R".
.SH "INCOMPATIBLE CHANGES TO OLD VERSION"
.IX Header "INCOMPATIBLE CHANGES TO OLD VERSION"
There are big incompatibility between new version (2.00) and old (1.xx).
If you use old \f(CW\*(C`JSON\*(C'\fR 1.xx in your code, please check it.
.PP
See to \*(L"Transition ways from 1.xx to 2.xx.\*(R"
.IP "jsonToObj and objToJson are obsoleted." 4
.IX Item "jsonToObj and objToJson are obsoleted."
Non Perl-style name \f(CW\*(C`jsonToObj\*(C'\fR and \f(CW\*(C`objToJson\*(C'\fR are obsoleted
(but not yet deleted from the source).
If you use these functions in your code, please replace them
with \f(CW\*(C`from_json\*(C'\fR and \f(CW\*(C`to_json\*(C'\fR.
.IP "Global variables are no longer available." 4
.IX Item "Global variables are no longer available."
\&\f(CW\*(C`JSON\*(C'\fR class variables \- \f(CW$JSON::AUTOCONVERT\fR, \f(CW$JSON::BareKey\fR, etc...
\&\- are not available any longer.
Instead, various features can be used through object methods.
.IP "Package JSON::Converter and JSON::Parser are deleted." 4
.IX Item "Package JSON::Converter and JSON::Parser are deleted."
Now \f(CW\*(C`JSON\*(C'\fR bundles with \s-1JSON::PP\s0 which can handle \s-1JSON\s0 more properly than them.
.IP "Package JSON::NotString is deleted." 4
.IX Item "Package JSON::NotString is deleted."
There was \f(CW\*(C`JSON::NotString\*(C'\fR class which represents \s-1JSON\s0 value \f(CW\*(C`true\*(C'\fR, \f(CW\*(C`false\*(C'\fR, \f(CW\*(C`null\*(C'\fR
and numbers. It was deleted and replaced by \f(CW\*(C`JSON::Boolean\*(C'\fR.
.Sp
\&\f(CW\*(C`JSON::Boolean\*(C'\fR represents \f(CW\*(C`true\*(C'\fR and \f(CW\*(C`false\*(C'\fR.
.Sp
\&\f(CW\*(C`JSON::Boolean\*(C'\fR does not represent \f(CW\*(C`null\*(C'\fR.
.Sp
\&\f(CW\*(C`JSON::null\*(C'\fR returns \f(CW\*(C`undef\*(C'\fR.
.Sp
\&\f(CW\*(C`JSON\*(C'\fR makes JSON::XS::Boolean and JSON::PP::Boolean is-a relation
to JSON::Boolean.
.IP "function JSON::Number is obsoleted." 4
.IX Item "function JSON::Number is obsoleted."
\&\f(CW\*(C`JSON::Number\*(C'\fR is now needless because \s-1JSON::XS\s0 and \s-1JSON::PP\s0 have
round-trip integrity.
.IP "\s-1JSONRPC\s0 modules are deleted." 4
.IX Item "JSONRPC modules are deleted."
Perl implementation of JSON-RPC protocol \- \f(CW\*(C`JSONRPC \*(C'\fR, \f(CW\*(C`JSONRPC::Transport::HTTP\*(C'\fR
and \f(CW\*(C`Apache::JSONRPC \*(C'\fR are deleted in this distribution.
Instead of them, there is \s-1JSON::RPC\s0 which supports JSON-RPC protocol version 1.1.
.SS "Transition ways from 1.xx to 2.xx."
.IX Subsection "Transition ways from 1.xx to 2.xx."
You should set \f(CW\*(C`suport_by_pp\*(C'\fR mode firstly, because
it is always successful for the below codes even with \s-1JSON::XS\s0.
.PP
.Vb 1
\&    use JSON \-support_by_pp;
.Ve
.IP "Exported jsonToObj (simple)" 4
.IX Item "Exported jsonToObj (simple)"
.Vb 1
\&  from_json($json_text);
.Ve
.IP "Exported objToJson (simple)" 4
.IX Item "Exported objToJson (simple)"
.Vb 1
\&  to_json($perl_scalar);
.Ve
.IP "Exported jsonToObj (advanced)" 4
.IX Item "Exported jsonToObj (advanced)"
.Vb 2
\&  $flags = {allow_barekey => 1, allow_singlequote => 1};
\&  from_json($json_text, $flags);
.Ve
.Sp
equivalent to:
.Sp
.Vb 3
\&  $JSON::BareKey = 1;
\&  $JSON::QuotApos = 1;
\&  jsonToObj($json_text);
.Ve
.IP "Exported objToJson (advanced)" 4
.IX Item "Exported objToJson (advanced)"
.Vb 2
\&  $flags = {allow_blessed => 1, allow_barekey => 1};
\&  to_json($perl_scalar, $flags);
.Ve
.Sp
equivalent to:
.Sp
.Vb 2
\&  $JSON::BareKey = 1;
\&  objToJson($perl_scalar);
.Ve
.IP "jsonToObj as object method" 4
.IX Item "jsonToObj as object method"
.Vb 1
\&  $json\->decode($json_text);
.Ve
.IP "objToJson as object method" 4
.IX Item "objToJson as object method"
.Vb 1
\&  $json\->encode($perl_scalar);
.Ve
.IP "new method with parameters" 4
.IX Item "new method with parameters"
The \f(CW\*(C`new\*(C'\fR method in 2.x takes any parameters no longer.
You can set parameters instead;
.Sp
.Vb 1
\&   $json = JSON\->new\->pretty;
.Ve
.ie n .IP "$JSON::Pretty, $JSON::Indent, $JSON::Delimiter" 4
.el .IP "\f(CW$JSON::Pretty\fR, \f(CW$JSON::Indent\fR, \f(CW$JSON::Delimiter\fR" 4
.IX Item "$JSON::Pretty, $JSON::Indent, $JSON::Delimiter"
If \f(CW\*(C`indent\*(C'\fR is enable, that means \f(CW$JSON::Pretty\fR flag set. And
\&\f(CW$JSON::Delimiter\fR was substituted by \f(CW\*(C`space_before\*(C'\fR and \f(CW\*(C`space_after\*(C'\fR.
In conclusion:
.Sp
.Vb 1
\&   $json\->indent\->space_before\->space_after;
.Ve
.Sp
Equivalent to:
.Sp
.Vb 1
\&  $json\->pretty;
.Ve
.Sp
To change indent length, use \f(CW\*(C`indent_length\*(C'\fR.
.Sp
(Only with \s-1JSON::PP\s0, if \f(CW\*(C`\-support_by_pp\*(C'\fR is not used.)
.Sp
.Vb 1
\&  $json\->pretty\->indent_length(2)\->encode($perl_scalar);
.Ve
.ie n .IP "$JSON::BareKey" 4
.el .IP "\f(CW$JSON::BareKey\fR" 4
.IX Item "$JSON::BareKey"
(Only with \s-1JSON::PP\s0, if \f(CW\*(C`\-support_by_pp\*(C'\fR is not used.)
.Sp
.Vb 1
\&  $json\->allow_barekey\->decode($json_text)
.Ve
.ie n .IP "$JSON::ConvBlessed" 4
.el .IP "\f(CW$JSON::ConvBlessed\fR" 4
.IX Item "$JSON::ConvBlessed"
use \f(CW\*(C`\-convert_blessed_universally\*(C'\fR. See to convert_blessed.
.ie n .IP "$JSON::QuotApos" 4
.el .IP "\f(CW$JSON::QuotApos\fR" 4
.IX Item "$JSON::QuotApos"
(Only with \s-1JSON::PP\s0, if \f(CW\*(C`\-support_by_pp\*(C'\fR is not used.)
.Sp
.Vb 1
\&  $json\->allow_singlequote\->decode($json_text)
.Ve
.ie n .IP "$JSON::SingleQuote" 4
.el .IP "\f(CW$JSON::SingleQuote\fR" 4
.IX Item "$JSON::SingleQuote"
Disable. \f(CW\*(C`JSON\*(C'\fR does not make such a invalid \s-1JSON\s0 string any longer.
.ie n .IP "$JSON::KeySort" 4
.el .IP "\f(CW$JSON::KeySort\fR" 4
.IX Item "$JSON::KeySort"
.Vb 1
\&  $json\->canonical\->encode($perl_scalar)
.Ve
.Sp
This is the ascii sort.
.Sp
If you want to use with your own sort routine, check the \f(CW\*(C`sort_by\*(C'\fR method.
.Sp
(Only with \s-1JSON::PP\s0, even if \f(CW\*(C`\-support_by_pp\*(C'\fR is used currently.)
.Sp
.Vb 1
\&  $json\->sort_by($sort_routine_ref)\->encode($perl_scalar)
\& 
\&  $json\->sort_by(sub { $JSON::PP::a <=> $JSON::PP::b })\->encode($perl_scalar)
.Ve
.Sp
Can't access \f(CW$a\fR and \f(CW$b\fR but \f(CW$JSON::PP::a\fR and \f(CW$JSON::PP::b\fR.
.ie n .IP "$JSON::SkipInvalid" 4
.el .IP "\f(CW$JSON::SkipInvalid\fR" 4
.IX Item "$JSON::SkipInvalid"
.Vb 1
\&  $json\->allow_unknown
.Ve
.ie n .IP "$JSON::AUTOCONVERT" 4
.el .IP "\f(CW$JSON::AUTOCONVERT\fR" 4
.IX Item "$JSON::AUTOCONVERT"
Needless. \f(CW\*(C`JSON\*(C'\fR backend modules have the round-trip integrity.
.ie n .IP "$JSON::UTF8" 4
.el .IP "\f(CW$JSON::UTF8\fR" 4
.IX Item "$JSON::UTF8"
Needless because \f(CW\*(C`JSON\*(C'\fR (\s-1JSON::XS/JSON::PP\s0) sets
the \s-1UTF8\s0 flag on properly.
.Sp
.Vb 1
\&    # With UTF8\-flagged strings
\&
\&    $json\->allow_nonref;
\&    $str = chr(1000); # UTF8\-flagged
\&
\&    $json_text  = $json\->utf8(0)\->encode($str);
\&    utf8::is_utf8($json_text);
\&    # true
\&    $json_text  = $json\->utf8(1)\->encode($str);
\&    utf8::is_utf8($json_text);
\&    # false
\&
\&    $str = \*(Aq"\*(Aq . chr(1000) . \*(Aq"\*(Aq; # UTF8\-flagged
\&
\&    $perl_scalar  = $json\->utf8(0)\->decode($str);
\&    utf8::is_utf8($perl_scalar);
\&    # true
\&    $perl_scalar  = $json\->utf8(1)\->decode($str);
\&    # died because of \*(AqWide character in subroutine\*(Aq
.Ve
.Sp
See to \*(L"A \s-1FEW\s0 \s-1NOTES\s0 \s-1ON\s0 \s-1UNICODE\s0 \s-1AND\s0 \s-1PERL\s0\*(R" in \s-1JSON::XS\s0.
.ie n .IP "$JSON::UnMapping" 4
.el .IP "\f(CW$JSON::UnMapping\fR" 4
.IX Item "$JSON::UnMapping"
Disable. See to \s-1MAPPING\s0.
.ie n .IP "$JSON::SelfConvert" 4
.el .IP "\f(CW$JSON::SelfConvert\fR" 4
.IX Item "$JSON::SelfConvert"
This option was deleted.
Instead of it, if a given blessed object has the \f(CW\*(C`TO_JSON\*(C'\fR method,
\&\f(CW\*(C`TO_JSON\*(C'\fR will be executed with \f(CW\*(C`convert_blessed\*(C'\fR.
.Sp
.Vb 2
\&  $json\->convert_blessed\->encode($blessed_hashref_or_arrayref)
\&  # if need, call allow_blessed
.Ve
.Sp
Note that it was \f(CW\*(C`toJson\*(C'\fR in old version, but now not \f(CW\*(C`toJson\*(C'\fR but \f(CW\*(C`TO_JSON\*(C'\fR.
.SH "TODO"
.IX Header "TODO"
.IP "example programs" 4
.IX Item "example programs"
.SH "THREADS"
.IX Header "THREADS"
No test with \s-1JSON::PP\s0. If with \s-1JSON::XS\s0, See to \*(L"\s-1THREADS\s0\*(R" in \s-1JSON::XS\s0.
.SH "BUGS"
.IX Header "BUGS"
Please report bugs relevant to \f(CW\*(C`JSON\*(C'\fR to <makamaka[at]cpan.org>.
.SH "SEE ALSO"
.IX Header "SEE ALSO"
Most of the document is copied and modified from \s-1JSON::XS\s0 doc.
.PP
\&\s-1JSON::XS\s0, \s-1JSON::PP\s0
.PP
\&\f(CW\*(C`RFC4627\*(C'\fR(<http://www.ietf.org/rfc/rfc4627.txt>)
.SH "AUTHOR"
.IX Header "AUTHOR"
Makamaka Hannyaharamitu, <makamaka[at]cpan.org>
.PP
\&\s-1JSON::XS\s0 was written by  Marc Lehmann <schmorp[at]schmorp.de>
.PP
The release of this new version owes to the courtesy of Marc Lehmann.
.SH "COPYRIGHT AND LICENSE"
.IX Header "COPYRIGHT AND LICENSE"
Copyright 2005\-2013 by Makamaka Hannyaharamitu
.PP
This library is free software; you can redistribute it and/or modify
it under the same terms as Perl itself.