/* * Copyright (c) 2011-2013, The Linux Foundation. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are * met: * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials provided * with the distribution. * * Neither the name of The Linux Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef OVERLAY_UTILS_H #define OVERLAY_UTILS_H #include // ALOGE, etc #include #include // open, O_RDWR, etc #include #include // buffer_handle_t #include // flags #include #include #include #include #include #include #include #include "gralloc_priv.h" //for interlace // Older platforms do not support Venus. #ifndef VENUS_COLOR_FORMAT #define MDP_Y_CBCR_H2V2_VENUS MDP_IMGTYPE_LIMIT #endif /* * * Collection of utilities functions/structs/enums etc... * * */ // comment that out if you want to remove asserts // or put it as -D in Android.mk. your choice. #define OVERLAY_HAS_ASSERT #ifdef OVERLAY_HAS_ASSERT # define OVASSERT(x, ...) if(!(x)) { ALOGE(__VA_ARGS__); abort(); } #else # define OVASSERT(x, ...) ALOGE_IF(!(x), __VA_ARGS__) #endif // OVERLAY_HAS_ASSERT #define DEBUG_OVERLAY 0 #define PROFILE_OVERLAY 0 #ifndef MDSS_MDP_RIGHT_MIXER #define MDSS_MDP_RIGHT_MIXER 0x100 #endif #ifndef MDP_OV_PIPE_FORCE_DMA #define MDP_OV_PIPE_FORCE_DMA 0x4000 #endif #define FB_DEVICE_TEMPLATE "/dev/graphics/fb%u" namespace overlay { // fwd class Overlay; class OvFD; /* helper function to open by using fbnum */ bool open(OvFD& fd, uint32_t fbnum, const char* const dev, int flags = O_RDWR); namespace utils { struct Whf; struct Dim; inline uint32_t setBit(uint32_t x, uint32_t mask) { return (x | mask); } inline uint32_t clrBit(uint32_t x, uint32_t mask) { return (x & ~mask); } /* Utility class to help avoid copying instances by making the copy ctor * and assignment operator private * * Usage: * class SomeClass : utils::NoCopy {...}; */ class NoCopy { protected: NoCopy(){} ~NoCopy() {} private: NoCopy(const NoCopy&); const NoCopy& operator=(const NoCopy&); }; /* 3D related utils, defines etc... * The compound format passed to the overlay is * ABCCC where A is the input 3D format * B is the output 3D format * CCC is the color format e.g YCbCr420SP YCrCb420SP etc */ enum { SHIFT_OUT_3D = 12, SHIFT_TOT_3D = 16 }; enum { INPUT_3D_MASK = 0xFFFF0000, OUTPUT_3D_MASK = 0x0000FFFF }; enum { BARRIER_LAND = 1, BARRIER_PORT = 2 }; inline uint32_t format3D(uint32_t x) { return x & 0xFF000; } inline uint32_t format3DOutput(uint32_t x) { return (x & 0xF000) >> SHIFT_OUT_3D; } inline uint32_t format3DInput(uint32_t x) { return x & 0xF0000; } bool isHDMIConnected (); bool is3DTV(); bool isPanel3D(); bool usePanel3D(); bool send3DInfoPacket (uint32_t fmt); bool enableBarrier (uint32_t orientation); uint32_t getS3DFormat(uint32_t fmt); bool isMdssRotator(); void normalizeCrop(uint32_t& xy, uint32_t& wh); template bool getPositionS3D(const Whf& whf, Dim& out); template bool getCropS3D(const Dim& in, Dim& out, uint32_t fmt); template void swapWidthHeight(Type& width, Type& height); struct Dim { Dim () : x(0), y(0), w(0), h(0), o(0) {} Dim(uint32_t _x, uint32_t _y, uint32_t _w, uint32_t _h) : x(_x), y(_y), w(_w), h(_h) {} Dim(uint32_t _x, uint32_t _y, uint32_t _w, uint32_t _h, uint32_t _o) : x(_x), y(_y), w(_w), h(_h), o(_o) {} bool check(uint32_t _w, uint32_t _h) const { return (x+w <= _w && y+h <= _h); } bool operator==(const Dim& d) const { return d.x == x && d.y == y && d.w == w && d.h == h && d.o == o; } bool operator!=(const Dim& d) const { return !operator==(d); } void dump() const; uint32_t x; uint32_t y; uint32_t w; uint32_t h; uint32_t o; }; // TODO have Whfz struct Whf { Whf() : w(0), h(0), format(0), size(0) {} Whf(uint32_t wi, uint32_t he, uint32_t f) : w(wi), h(he), format(f), size(0) {} Whf(uint32_t wi, uint32_t he, uint32_t f, uint32_t s) : w(wi), h(he), format(f), size(s) {} // FIXME not comparing size at the moment bool operator==(const Whf& whf) const { return whf.w == w && whf.h == h && whf.format == format; } bool operator!=(const Whf& whf) const { return !operator==(whf); } void dump() const; uint32_t w; uint32_t h; uint32_t format; uint32_t size; }; enum { MAX_PATH_LEN = 256 }; enum { DEFAULT_PLANE_ALPHA = 0xFF }; /** * Rotator flags: not to be confused with orientation flags. * Usually, you want to open the rotator to make sure it is * ready for business. * */ enum eRotFlags { ROT_FLAGS_NONE = 0, //Use rotator for 0 rotation. It is used anyway for others. ROT_0_ENABLED = 1 << 0, //Enable rotator downscale optimization for hardware bugs not handled in //driver. If downscale optimizatation is required, //then rotator will be used even if its 0 rotation case. ROT_DOWNSCALE_ENABLED = 1 << 1, ROT_PREROTATED = 1 << 2, }; enum eRotDownscale { ROT_DS_NONE = 0, ROT_DS_HALF = 1, ROT_DS_FOURTH = 2, ROT_DS_EIGHTH = 3, }; /* The values for is_fg flag for control alpha and transp * IS_FG_OFF means is_fg = 0 * IS_FG_SET means is_fg = 1 */ enum eIsFg { IS_FG_OFF = 0, IS_FG_SET = 1 }; /* * Various mdp flags like PIPE SHARE, DEINTERLACE etc... * kernel/common/linux/msm_mdp.h * INTERLACE_MASK: hardware/qcom/display/libgralloc/badger/fb_priv.h * */ enum eMdpFlags { OV_MDP_FLAGS_NONE = 0, OV_MDP_PIPE_SHARE = MDP_OV_PIPE_SHARE, OV_MDP_PIPE_FORCE_DMA = MDP_OV_PIPE_FORCE_DMA, OV_MDP_DEINTERLACE = MDP_DEINTERLACE, OV_MDP_SECURE_OVERLAY_SESSION = MDP_SECURE_OVERLAY_SESSION, OV_MDP_SOURCE_ROTATED_90 = MDP_SOURCE_ROTATED_90, OV_MDP_BACKEND_COMPOSITION = MDP_BACKEND_COMPOSITION, OV_MDP_BLEND_FG_PREMULT = MDP_BLEND_FG_PREMULT, OV_MDP_FLIP_H = MDP_FLIP_LR, OV_MDP_FLIP_V = MDP_FLIP_UD, OV_MDSS_MDP_RIGHT_MIXER = MDSS_MDP_RIGHT_MIXER, OV_MDP_PP_EN = MDP_OVERLAY_PP_CFG_EN, OV_MDSS_MDP_BWC_EN = MDP_BWC_EN, }; enum eZorder { ZORDER_0 = 0, ZORDER_1, ZORDER_2, ZORDER_3, Z_SYSTEM_ALLOC = 0xFFFF }; enum eMdpPipeType { OV_MDP_PIPE_RGB = 0, OV_MDP_PIPE_VG, OV_MDP_PIPE_DMA, OV_MDP_PIPE_ANY, //Any }; // Identify destination pipes // TODO Names useless, replace with int and change all interfaces enum eDest { OV_P0 = 0, OV_P1, OV_P2, OV_P3, OV_P4, OV_P5, OV_P6, OV_P7, OV_P8, OV_P9, OV_INVALID, OV_MAX = OV_INVALID, }; /* Used when a buffer is split over 2 pipes and sent to display */ enum { OV_LEFT_SPLIT = 0, OV_RIGHT_SPLIT, }; /* values for copybit_set_parameter(OVERLAY_TRANSFORM) */ enum eTransform { /* No rot */ OVERLAY_TRANSFORM_0 = 0x0, /* flip source image horizontally 0x1 */ OVERLAY_TRANSFORM_FLIP_H = HAL_TRANSFORM_FLIP_H, /* flip source image vertically 0x2 */ OVERLAY_TRANSFORM_FLIP_V = HAL_TRANSFORM_FLIP_V, /* rotate source image 180 degrees * It is basically bit-or-ed H | V == 0x3 */ OVERLAY_TRANSFORM_ROT_180 = HAL_TRANSFORM_ROT_180, /* rotate source image 90 degrees 0x4 */ OVERLAY_TRANSFORM_ROT_90 = HAL_TRANSFORM_ROT_90, /* rotate source image 90 degrees and flip horizontally 0x5 */ OVERLAY_TRANSFORM_ROT_90_FLIP_H = HAL_TRANSFORM_ROT_90 | HAL_TRANSFORM_FLIP_H, /* rotate source image 90 degrees and flip vertically 0x6 */ OVERLAY_TRANSFORM_ROT_90_FLIP_V = HAL_TRANSFORM_ROT_90 | HAL_TRANSFORM_FLIP_V, /* rotate source image 270 degrees * Basically 180 | 90 == 0x7 */ OVERLAY_TRANSFORM_ROT_270 = HAL_TRANSFORM_ROT_270, /* rotate invalid like in Transform.h */ OVERLAY_TRANSFORM_INV = 0x80 }; enum eBlending { OVERLAY_BLENDING_UNDEFINED = 0x0, /* No blending */ OVERLAY_BLENDING_OPAQUE, /* src.rgb + dst.rgb*(1-src_alpha) */ OVERLAY_BLENDING_PREMULT, /* src.rgb * src_alpha + dst.rgb (1 - src_alpha) */ OVERLAY_BLENDING_COVERAGE, }; // Used to consolidate pipe params struct PipeArgs { PipeArgs() : mdpFlags(OV_MDP_FLAGS_NONE), zorder(Z_SYSTEM_ALLOC), isFg(IS_FG_OFF), rotFlags(ROT_FLAGS_NONE), planeAlpha(DEFAULT_PLANE_ALPHA), blending(OVERLAY_BLENDING_COVERAGE){ } PipeArgs(eMdpFlags f, Whf _whf, eZorder z, eIsFg fg, eRotFlags r, int pA, eBlending b) : mdpFlags(f), whf(_whf), zorder(z), isFg(fg), rotFlags(r), planeAlpha(pA), blending(b){ } eMdpFlags mdpFlags; // for mdp_overlay flags Whf whf; eZorder zorder; // stage number eIsFg isFg; // control alpha & transp eRotFlags rotFlags; int planeAlpha; eBlending blending; }; // Cannot use HW_OVERLAY_MAGNIFICATION_LIMIT, since at the time // of integration, HW_OVERLAY_MAGNIFICATION_LIMIT was a define enum { HW_OV_MAGNIFICATION_LIMIT = 20, HW_OV_MINIFICATION_LIMIT = 8 }; inline void setMdpFlags(eMdpFlags& f, eMdpFlags v) { f = static_cast(setBit(f, v)); } inline void clearMdpFlags(eMdpFlags& f, eMdpFlags v) { f = static_cast(clrBit(f, v)); } enum { FB0, FB1, FB2 }; struct ScreenInfo { ScreenInfo() : mFBWidth(0), mFBHeight(0), mFBbpp(0), mFBystride(0) {} void dump(const char* const s) const; uint32_t mFBWidth; uint32_t mFBHeight; uint32_t mFBbpp; uint32_t mFBystride; }; int getMdpFormat(int format); int getHALFormat(int mdpFormat); int getDownscaleFactor(const int& src_w, const int& src_h, const int& dst_w, const int& dst_h); void getDecimationFactor(const int& src_w, const int& src_h, const int& dst_w, const int& dst_h, float& horDscale, float& verDscale); /* flip is upside down and such. V, H flip * rotation is 90, 180 etc * It returns MDP related enum/define that match rot+flip*/ int getMdpOrient(eTransform rotation); const char* getFormatString(int format); template inline void memset0(T& t) { ::memset(&t, 0, sizeof(T)); } template inline void swap ( T& a, T& b ) { T c(a); a=b; b=c; } inline int alignup(int value, int a) { //if align = 0, return the value. Else, do alignment. return a ? ((((value - 1) / a) + 1) * a) : value; } inline int aligndown(int value, int a) { //if align = 0, return the value. Else, do alignment. return a ? ((value) & ~(a-1)) : value; } // FIXME that align should replace the upper one. inline int align(int value, int a) { //if align = 0, return the value. Else, do alignment. return a ? ((value + (a-1)) & ~(a-1)) : value; } enum eRotOutFmt { ROT_OUT_FMT_DEFAULT, ROT_OUT_FMT_Y_CRCB_H2V2 }; template struct RotOutFmt; // FIXME, taken from gralloc_priv.h. Need to // put it back as soon as overlay takes place of the old one /* possible formats for 3D content*/ enum { HAL_NO_3D = 0x0000, HAL_3D_IN_SIDE_BY_SIDE_L_R = 0x10000, HAL_3D_IN_TOP_BOTTOM = 0x20000, HAL_3D_IN_INTERLEAVE = 0x40000, HAL_3D_IN_SIDE_BY_SIDE_R_L = 0x80000, HAL_3D_OUT_SIDE_BY_SIDE = 0x1000, HAL_3D_OUT_TOP_BOTTOM = 0x2000, HAL_3D_OUT_INTERLEAVE = 0x4000, HAL_3D_OUT_MONOSCOPIC = 0x8000 }; enum { HAL_3D_OUT_SBS_MASK = HAL_3D_OUT_SIDE_BY_SIDE >> overlay::utils::SHIFT_OUT_3D, HAL_3D_OUT_TOP_BOT_MASK = HAL_3D_OUT_TOP_BOTTOM >> overlay::utils::SHIFT_OUT_3D, HAL_3D_OUT_INTERL_MASK = HAL_3D_OUT_INTERLEAVE >> overlay::utils::SHIFT_OUT_3D, HAL_3D_OUT_MONOS_MASK = HAL_3D_OUT_MONOSCOPIC >> overlay::utils::SHIFT_OUT_3D }; inline bool isYuv(uint32_t format) { switch(format){ case MDP_Y_CBCR_H2V1: case MDP_Y_CBCR_H2V2: case MDP_Y_CRCB_H2V2: case MDP_Y_CRCB_H1V1: case MDP_Y_CRCB_H2V1: case MDP_Y_CRCB_H2V2_TILE: case MDP_Y_CBCR_H2V2_TILE: case MDP_Y_CR_CB_H2V2: case MDP_Y_CR_CB_GH2V2: case MDP_Y_CBCR_H2V2_VENUS: return true; default: return false; } return false; } inline bool isRgb(uint32_t format) { switch(format) { case MDP_RGBA_8888: case MDP_BGRA_8888: case MDP_RGBX_8888: case MDP_RGB_565: return true; default: return false; } return false; } inline const char* getFormatString(int format){ #define STR(f) #f; static const char* formats[MDP_IMGTYPE_LIMIT + 1] = {0}; formats[MDP_RGB_565] = STR(MDP_RGB_565); formats[MDP_XRGB_8888] = STR(MDP_XRGB_8888); formats[MDP_Y_CBCR_H2V2] = STR(MDP_Y_CBCR_H2V2); formats[MDP_Y_CBCR_H2V2_ADRENO] = STR(MDP_Y_CBCR_H2V2_ADRENO); formats[MDP_ARGB_8888] = STR(MDP_ARGB_8888); formats[MDP_RGB_888] = STR(MDP_RGB_888); formats[MDP_Y_CRCB_H2V2] = STR(MDP_Y_CRCB_H2V2); formats[MDP_YCRYCB_H2V1] = STR(MDP_YCRYCB_H2V1); formats[MDP_CBYCRY_H2V1] = STR(MDP_CBYCRY_H2V1); formats[MDP_Y_CRCB_H2V1] = STR(MDP_Y_CRCB_H2V1); formats[MDP_Y_CBCR_H2V1] = STR(MDP_Y_CBCR_H2V1); formats[MDP_Y_CRCB_H1V2] = STR(MDP_Y_CRCB_H1V2); formats[MDP_Y_CBCR_H1V2] = STR(MDP_Y_CBCR_H1V2); formats[MDP_RGBA_8888] = STR(MDP_RGBA_8888); formats[MDP_BGRA_8888] = STR(MDP_BGRA_8888); formats[MDP_RGBX_8888] = STR(MDP_RGBX_8888); formats[MDP_Y_CRCB_H2V2_TILE] = STR(MDP_Y_CRCB_H2V2_TILE); formats[MDP_Y_CBCR_H2V2_TILE] = STR(MDP_Y_CBCR_H2V2_TILE); formats[MDP_Y_CR_CB_H2V2] = STR(MDP_Y_CR_CB_H2V2); formats[MDP_Y_CR_CB_GH2V2] = STR(MDP_Y_CR_CB_GH2V2); formats[MDP_Y_CB_CR_H2V2] = STR(MDP_Y_CB_CR_H2V2); formats[MDP_Y_CRCB_H1V1] = STR(MDP_Y_CRCB_H1V1); formats[MDP_Y_CBCR_H1V1] = STR(MDP_Y_CBCR_H1V1); formats[MDP_YCRCB_H1V1] = STR(MDP_YCRCB_H1V1); formats[MDP_YCBCR_H1V1] = STR(MDP_YCBCR_H1V1); formats[MDP_BGR_565] = STR(MDP_BGR_565); formats[MDP_BGR_888] = STR(MDP_BGR_888); formats[MDP_Y_CBCR_H2V2_VENUS] = STR(MDP_Y_CBCR_H2V2_VENUS); formats[MDP_BGRX_8888] = STR(MDP_BGRX_8888); formats[MDP_IMGTYPE_LIMIT] = STR(MDP_IMGTYPE_LIMIT); if(format < 0 || format >= MDP_IMGTYPE_LIMIT) { ALOGE("%s wrong fmt %d", __FUNCTION__, format); return "Unsupported format"; } if(formats[format] == 0) { ALOGE("%s: table missing format %d from header", __FUNCTION__, format); return ""; } return formats[format]; } inline void Whf::dump() const { ALOGE("== Dump WHF w=%d h=%d f=%d s=%d start/end ==", w, h, format, size); } inline void Dim::dump() const { ALOGE("== Dump Dim x=%d y=%d w=%d h=%d start/end ==", x, y, w, h); } // FB0 template inline Dim getPositionS3DImpl(const Whf& whf) { switch (whf.format & OUTPUT_3D_MASK) { case HAL_3D_OUT_SBS_MASK: // x, y, w, h return Dim(0, 0, whf.w/2, whf.h); case HAL_3D_OUT_TOP_BOT_MASK: return Dim(0, 0, whf.w, whf.h/2); case HAL_3D_OUT_MONOS_MASK: return Dim(); case HAL_3D_OUT_INTERL_MASK: // FIXME error? ALOGE("%s HAL_3D_OUT_INTERLEAVE_MASK", __FUNCTION__); return Dim(); default: ALOGE("%s Unsupported 3D output format %d", __FUNCTION__, whf.format); } return Dim(); } template <> inline Dim getPositionS3DImpl(const Whf& whf) { switch (whf.format & OUTPUT_3D_MASK) { case HAL_3D_OUT_SBS_MASK: return Dim(whf.w/2, 0, whf.w/2, whf.h); case HAL_3D_OUT_TOP_BOT_MASK: return Dim(0, whf.h/2, whf.w, whf.h/2); case HAL_3D_OUT_MONOS_MASK: return Dim(0, 0, whf.w, whf.h); case HAL_3D_OUT_INTERL_MASK: // FIXME error? ALOGE("%s HAL_3D_OUT_INTERLEAVE_MASK", __FUNCTION__); return Dim(); default: ALOGE("%s Unsupported 3D output format %d", __FUNCTION__, whf.format); } return Dim(); } template inline bool getPositionS3D(const Whf& whf, Dim& out) { out = getPositionS3DImpl(whf); return (out != Dim()); } template inline Dim getCropS3DImpl(const Dim& in, uint32_t fmt) { switch (fmt & INPUT_3D_MASK) { case HAL_3D_IN_SIDE_BY_SIDE_L_R: return Dim(0, 0, in.w/2, in.h); case HAL_3D_IN_SIDE_BY_SIDE_R_L: return Dim(in.w/2, 0, in.w/2, in.h); case HAL_3D_IN_TOP_BOTTOM: return Dim(0, 0, in.w, in.h/2); case HAL_3D_IN_INTERLEAVE: ALOGE("%s HAL_3D_IN_INTERLEAVE", __FUNCTION__); break; default: ALOGE("%s Unsupported 3D format %d", __FUNCTION__, fmt); break; } return Dim(); } template <> inline Dim getCropS3DImpl(const Dim& in, uint32_t fmt) { switch (fmt & INPUT_3D_MASK) { case HAL_3D_IN_SIDE_BY_SIDE_L_R: return Dim(in.w/2, 0, in.w/2, in.h); case HAL_3D_IN_SIDE_BY_SIDE_R_L: return Dim(0, 0, in.w/2, in.h); case HAL_3D_IN_TOP_BOTTOM: return Dim(0, in.h/2, in.w, in.h/2); case HAL_3D_IN_INTERLEAVE: ALOGE("%s HAL_3D_IN_INTERLEAVE", __FUNCTION__); break; default: ALOGE("%s Unsupported 3D format %d", __FUNCTION__, fmt); break; } return Dim(); } template inline bool getCropS3D(const Dim& in, Dim& out, uint32_t fmt) { out = getCropS3DImpl(in, fmt); return (out != Dim()); } template void swapWidthHeight(Type& width, Type& height) { Type tmp = width; width = height; height = tmp; } inline void ScreenInfo::dump(const char* const s) const { ALOGE("== Dump %s ScreenInfo w=%d h=%d" " bpp=%d stride=%d start/end ==", s, mFBWidth, mFBHeight, mFBbpp, mFBystride); } inline bool openDev(OvFD& fd, int fbnum, const char* const devpath, int flags) { return overlay::open(fd, fbnum, devpath, flags); } template inline void even_ceil(T& value) { if(value & 1) value++; } template inline void even_floor(T& value) { if(value & 1) value--; } void preRotateSource(const eTransform& tr, Whf& whf, Dim& srcCrop); void getDump(char *buf, size_t len, const char *prefix, const mdp_overlay& ov); void getDump(char *buf, size_t len, const char *prefix, const msmfb_img& ov); void getDump(char *buf, size_t len, const char *prefix, const mdp_rect& ov); void getDump(char *buf, size_t len, const char *prefix, const msmfb_overlay_data& ov); void getDump(char *buf, size_t len, const char *prefix, const msmfb_data& ov); void getDump(char *buf, size_t len, const char *prefix, const msm_rotator_img_info& ov); void getDump(char *buf, size_t len, const char *prefix, const msm_rotator_data_info& ov); } // namespace utils ends //--------------------Class Res stuff (namespace overlay only) ----------- class Res { public: // /dev/graphics/fb%u static const char* const fbPath; // /dev/msm_rotator static const char* const rotPath; // /sys/class/graphics/fb1/format_3d static const char* const format3DFile; // /sys/class/graphics/fb1/3d_present static const char* const edid3dInfoFile; // /sys/devices/platform/mipi_novatek.0/enable_3d_barrier static const char* const barrierFile; }; //--------------------Class OvFD stuff (namespace overlay only) ----------- /* * Holds one FD * Dtor will NOT close the underlying FD. * That enables us to copy that object around * */ class OvFD { public: /* Ctor */ explicit OvFD(); /* dtor will NOT close the underlying FD */ ~OvFD(); /* Open fd using the path given by dev. * return false in failure */ bool open(const char* const dev, int flags = O_RDWR); /* populate path */ void setPath(const char* const dev); /* Close fd if we have a valid fd. */ bool close(); /* returns underlying fd.*/ int getFD() const; /* returns true if fd is valid */ bool valid() const; /* like operator= */ void copy(int fd); /* dump the state of the instance */ void dump() const; private: /* helper enum for determine valid/invalid fd */ enum { INVAL = -1 }; /* actual os fd */ int mFD; /* path, for debugging */ char mPath[utils::MAX_PATH_LEN]; }; //-------------------Inlines-------------------------- inline bool open(OvFD& fd, uint32_t fbnum, const char* const dev, int flags) { char dev_name[64] = {0}; snprintf(dev_name, sizeof(dev_name), dev, fbnum); return fd.open(dev_name, flags); } inline OvFD::OvFD() : mFD (INVAL) { mPath[0] = 0; } inline OvFD::~OvFD() { //no op since copy() can be used to share fd, in 3d cases. } inline bool OvFD::open(const char* const dev, int flags) { mFD = ::open(dev, flags, 0); if (mFD < 0) { // FIXME errno, strerror in bionic? ALOGE("Cant open device %s err=%d", dev, errno); return false; } setPath(dev); return true; } inline void OvFD::setPath(const char* const dev) { ::strncpy(mPath, dev, utils::MAX_PATH_LEN); } inline bool OvFD::close() { int ret = 0; if(valid()) { ret = ::close(mFD); mFD = INVAL; } return (ret == 0); } inline bool OvFD::valid() const { return (mFD != INVAL); } inline int OvFD::getFD() const { return mFD; } inline void OvFD::copy(int fd) { mFD = fd; } inline void OvFD::dump() const { ALOGE("== Dump OvFD fd=%d path=%s start/end ==", mFD, mPath); } //--------------- class OvFD stuff ends --------------------- } // overlay #endif // OVERLAY_UTILS_H