1 /****************************************************************************** 2 * 3 * Copyright (C) 1999-2012 Broadcom Corporation 4 * 5 * Licensed under the Apache License, Version 2.0 (the "License"); 6 * you may not use this file except in compliance with the License. 7 * You may obtain a copy of the License at: 8 * 9 * http://www.apache.org/licenses/LICENSE-2.0 10 * 11 * Unless required by applicable law or agreed to in writing, software 12 * distributed under the License is distributed on an "AS IS" BASIS, 13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 * See the License for the specific language governing permissions and 15 * limitations under the License. 16 * 17 ******************************************************************************/ 18 19 /****************************************************************************** 20 * 21 * This file contains the Bluetooth Manager (BTM) API function external 22 * definitions. 23 * 24 ******************************************************************************/ 25 #ifndef BTM_API_H 26 #define BTM_API_H 27 28 #include "bt_target.h" 29 #include "sdp_api.h" 30 #include "hcidefs.h" 31 32 #if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE 33 #include "smp_api.h" 34 #endif 35 /***************************************************************************** 36 ** DEVICE CONTROL and COMMON 37 *****************************************************************************/ 38 /***************************** 39 ** Device Control Constants 40 ******************************/ 41 /* Maximum number of bytes allowed for vendor specific command parameters */ 42 #define BTM_MAX_VENDOR_SPECIFIC_LEN HCI_COMMAND_SIZE 43 44 /* BTM application return status codes */ 45 enum 46 { 47 BTM_SUCCESS = 0, /* 0 Command succeeded */ 48 BTM_CMD_STARTED, /* 1 Command started OK. */ 49 BTM_BUSY, /* 2 Device busy with another command */ 50 BTM_NO_RESOURCES, /* 3 No resources to issue command */ 51 BTM_MODE_UNSUPPORTED, /* 4 Request for 1 or more unsupported modes */ 52 BTM_ILLEGAL_VALUE, /* 5 Illegal parameter value */ 53 BTM_WRONG_MODE, /* 6 Device in wrong mode for request */ 54 BTM_UNKNOWN_ADDR, /* 7 Unknown remote BD address */ 55 BTM_DEVICE_TIMEOUT, /* 8 Device timeout */ 56 BTM_BAD_VALUE_RET, /* 9 A bad value was received from HCI */ 57 BTM_ERR_PROCESSING, /* 10 Generic error */ 58 BTM_NOT_AUTHORIZED, /* 11 Authorization failed */ 59 BTM_DEV_RESET, /* 12 Device has been reset */ 60 BTM_CMD_STORED, /* 13 request is stored in control block */ 61 BTM_ILLEGAL_ACTION, /* 14 state machine gets illegal command */ 62 BTM_DELAY_CHECK, /* 15 delay the check on encryption */ 63 BTM_SCO_BAD_LENGTH, /* 16 Bad SCO over HCI data length */ 64 BTM_SUCCESS_NO_SECURITY, /* 17 security passed, no security set */ 65 BTM_FAILED_ON_SECURITY , /* 18 security failed */ 66 BTM_REPEATED_ATTEMPTS /* 19 repeated attempts for LE security requests */ 67 }; 68 typedef UINT8 tBTM_STATUS; 69 70 #if (defined(BTA_HOST_INTERLEAVE_SEARCH) && BTA_HOST_INTERLEAVE_SEARCH == TRUE) 71 typedef enum 72 { 73 BTM_BR_ONE, /*0 First state or BR/EDR scan 1*/ 74 BTM_BLE_ONE, /*1BLE scan 1*/ 75 BTM_BR_TWO, /*2 BR/EDR scan 2*/ 76 BTM_BLE_TWO, /*3 BLE scan 2*/ 77 BTM_FINISH, /*4 End of Interleave Scan, or normal scan*/ 78 BTM_NO_INTERLEAVING /*5 No Interleaving*/ 79 }btm_inq_state; 80 #endif 81 82 83 84 /************************* 85 ** Device Control Types 86 **************************/ 87 #define BTM_DEVICE_ROLE_BR 0x01 88 #define BTM_DEVICE_ROLE_DUAL 0x02 89 #define BTM_MAX_DEVICE_ROLE BTM_DEVICE_ROLE_DUAL 90 typedef UINT8 tBTM_DEVICE_ROLE; 91 92 /* Device name of peer (may be truncated to save space in BTM database) */ 93 typedef UINT8 tBTM_BD_NAME[BTM_MAX_REM_BD_NAME_LEN + 1]; 94 95 /* Structure returned with local version information */ 96 typedef struct 97 { 98 UINT8 hci_version; 99 UINT16 hci_revision; 100 UINT8 lmp_version; 101 UINT16 manufacturer; 102 UINT16 lmp_subversion; 103 } tBTM_VERSION_INFO; 104 105 /* Structure returned with Vendor Specific Command complete callback */ 106 typedef struct 107 { 108 UINT16 opcode; 109 UINT16 param_len; 110 UINT8 *p_param_buf; 111 } tBTM_VSC_CMPL; 112 113 #define BTM_VSC_CMPL_DATA_SIZE (BTM_MAX_VENDOR_SPECIFIC_LEN + sizeof(tBTM_VSC_CMPL)) 114 /************************************************** 115 ** Device Control and General Callback Functions 116 ***************************************************/ 117 /* Callback function for when device status changes. Appl must poll for 118 ** what the new state is (BTM_IsDeviceUp). The event occurs whenever the stack 119 ** has detected that the controller status has changed. This asynchronous event 120 ** is enabled/disabled by calling BTM_RegisterForDeviceStatusNotif(). 121 */ 122 enum 123 { 124 BTM_DEV_STATUS_UP, 125 BTM_DEV_STATUS_DOWN, 126 BTM_DEV_STATUS_CMD_TOUT 127 }; 128 129 typedef UINT8 tBTM_DEV_STATUS; 130 131 132 typedef void (tBTM_DEV_STATUS_CB) (tBTM_DEV_STATUS status); 133 134 135 /* Callback function for when a vendor specific event occurs. The length and 136 ** array of returned parameter bytes are included. This asynchronous event 137 ** is enabled/disabled by calling BTM_RegisterForVSEvents(). 138 */ 139 typedef void (tBTM_VS_EVT_CB) (UINT8 len, UINT8 *p); 140 141 142 /* General callback function for notifying an application that a synchronous 143 ** BTM function is complete. The pointer contains the address of any returned data. 144 */ 145 typedef void (tBTM_CMPL_CB) (void *p1); 146 147 /* VSC callback function for notifying an application that a synchronous 148 ** BTM function is complete. The pointer contains the address of any returned data. 149 */ 150 typedef void (tBTM_VSC_CMPL_CB) (tBTM_VSC_CMPL *p1); 151 152 /* Callback for apps to check connection and inquiry filters. 153 ** Parameters are the BD Address of remote and the Dev Class of remote. 154 ** If the app returns none zero, the connection or inquiry result will be dropped. 155 */ 156 typedef UINT8 (tBTM_FILTER_CB) (BD_ADDR bd_addr, DEV_CLASS dc); 157 158 /***************************************************************************** 159 ** DEVICE DISCOVERY - Inquiry, Remote Name, Discovery, Class of Device 160 *****************************************************************************/ 161 /******************************* 162 ** Device Discovery Constants 163 ********************************/ 164 /* Discoverable modes */ 165 #define BTM_NON_DISCOVERABLE 0 166 #define BTM_LIMITED_DISCOVERABLE 1 167 #define BTM_GENERAL_DISCOVERABLE 2 168 #define BTM_DISCOVERABLE_MASK (BTM_LIMITED_DISCOVERABLE|BTM_GENERAL_DISCOVERABLE) 169 #define BTM_MAX_DISCOVERABLE BTM_GENERAL_DISCOVERABLE 170 /* high byte for BLE Discoverable modes */ 171 #define BTM_BLE_NON_DISCOVERABLE 0x0000 172 #define BTM_BLE_LIMITED_DISCOVERABLE 0x0100 173 #define BTM_BLE_GENERAL_DISCOVERABLE 0x0200 174 #define BTM_BLE_MAX_DISCOVERABLE BTM_BLE_GENERAL_DISCOVERABLE 175 #define BTM_BLE_DISCOVERABLE_MASK (BTM_BLE_NON_DISCOVERABLE|BTM_BLE_LIMITED_DISCOVERABLE|BTM_BLE_GENERAL_DISCOVERABLE) 176 177 /* Connectable modes */ 178 #define BTM_NON_CONNECTABLE 0 179 #define BTM_CONNECTABLE 1 180 #define BTM_CONNECTABLE_MASK (BTM_NON_CONNECTABLE | BTM_CONNECTABLE) 181 /* high byte for BLE Connectable modes */ 182 #define BTM_BLE_NON_CONNECTABLE 0x0000 183 #define BTM_BLE_CONNECTABLE 0x0100 184 #define BTM_BLE_MAX_CONNECTABLE BTM_BLE_CONNECTABLE 185 #define BTM_BLE_CONNECTABLE_MASK (BTM_BLE_NON_CONNECTABLE | BTM_BLE_CONNECTABLE) 186 187 /* Inquiry modes 188 * Note: These modes are associated with the inquiry active values (BTM_*ACTIVE) */ 189 #define BTM_INQUIRY_NONE 0 190 #define BTM_GENERAL_INQUIRY 0x01 191 #define BTM_LIMITED_INQUIRY 0x02 192 #define BTM_BR_INQUIRY_MASK (BTM_GENERAL_INQUIRY | BTM_LIMITED_INQUIRY) 193 194 /* high byte of inquiry mode for BLE inquiry mode */ 195 #define BTM_BLE_INQUIRY_NONE 0x00 196 #define BTM_BLE_GENERAL_INQUIRY 0x10 197 #define BTM_BLE_LIMITED_INQUIRY 0x20 198 #define BTM_BLE_INQUIRY_MASK (BTM_BLE_GENERAL_INQUIRY|BTM_BLE_LIMITED_INQUIRY) 199 200 /* BTM_IsInquiryActive return values (Bit Mask) 201 * Note: These bit masks are associated with the inquiry modes (BTM_*_INQUIRY) */ 202 #define BTM_INQUIRY_INACTIVE 0x0 /* no inquiry in progress */ 203 #define BTM_GENERAL_INQUIRY_ACTIVE 0x1 /* a general inquiry is in progress */ 204 #define BTM_LIMITED_INQUIRY_ACTIVE 0x2 /* a limited inquiry is in progress */ 205 #define BTM_PERIODIC_INQUIRY_ACTIVE 0x8 /* a periodic inquiry is active */ 206 #define BTM_SSP_INQUIRY_ACTIVE 0x4 /* SSP is active, so inquiry is disallowed (work around for FW bug) */ 207 #define BTM_LE_GENERAL_INQUIRY_ACTIVE 0x10 /* a general inquiry is in progress */ 208 #define BTM_LE_LIMITED_INQUIRY_ACTIVE 0x20 /* a limited inquiry is in progress */ 209 #define BTM_LE_SELECT_CONN_ACTIVE 0x40 /* selection connection is in progress */ 210 #define BTM_LE_OBSERVE_ACTIVE 0x80 /* selection connection is in progress */ 211 212 /* inquiry activity mask */ 213 #define BTM_BR_INQ_ACTIVE_MASK (BTM_GENERAL_INQUIRY_ACTIVE|BTM_LIMITED_INQUIRY_ACTIVE|BTM_PERIODIC_INQUIRY_ACTIVE) /* BR/EDR inquiry activity mask */ 214 #define BTM_LE_SCAN_ACTIVE_MASK 0xF0 /* LE scan activity mask */ 215 #define BTM_LE_INQ_ACTIVE_MASK (BTM_LE_GENERAL_INQUIRY_ACTIVE|BTM_LE_LIMITED_INQUIRY_ACTIVE) /* LE inquiry activity mask*/ 216 #define BTM_INQUIRY_ACTIVE_MASK (BTM_BR_INQ_ACTIVE_MASK | BTM_LE_INQ_ACTIVE_MASK) /* inquiry activity mask */ 217 218 /* Define scan types */ 219 #define BTM_SCAN_TYPE_STANDARD 0 220 #define BTM_SCAN_TYPE_INTERLACED 1 /* 1.2 devices only */ 221 222 /* Define inquiry results mode */ 223 #define BTM_INQ_RESULT_STANDARD 0 224 #define BTM_INQ_RESULT_WITH_RSSI 1 225 #define BTM_INQ_RESULT_EXTENDED 2 226 227 #define BTM_INQ_RES_IGNORE_RSSI 0x7f /* RSSI value not supplied (ignore it) */ 228 229 /* Inquiry Filter Condition types (see tBTM_INQ_PARMS) */ 230 #define BTM_CLR_INQUIRY_FILTER 0 /* Inquiry Filtering is turned off */ 231 #define BTM_FILTER_COND_DEVICE_CLASS HCI_FILTER_COND_DEVICE_CLASS /* Filter on device class */ 232 #define BTM_FILTER_COND_BD_ADDR HCI_FILTER_COND_BD_ADDR /* Filter on device addr */ 233 234 /* State of the remote name retrieval during inquiry operations. 235 ** Used in the tBTM_INQ_INFO structure, and returned in the 236 ** BTM_InqDbRead, BTM_InqDbFirst, and BTM_InqDbNext functions. 237 ** The name field is valid when the state returned is 238 ** BTM_INQ_RMT_NAME_DONE */ 239 #define BTM_INQ_RMT_NAME_EMPTY 0 240 #define BTM_INQ_RMT_NAME_PENDING 1 241 #define BTM_INQ_RMT_NAME_DONE 2 242 #define BTM_INQ_RMT_NAME_FAILED 3 243 244 /********************************* 245 *** Class of Device constants *** 246 *********************************/ 247 #define BTM_FORMAT_TYPE_1 0x00 248 249 /**************************** 250 ** minor device class field 251 *****************************/ 252 253 /* 0x00 is used as unclassified for all minor device classes */ 254 #define BTM_COD_MINOR_UNCLASSIFIED 0x00 255 256 /* minor device class field for Computer Major Class */ 257 /* #define BTM_COD_MINOR_UNCLASSIFIED 0x00 */ 258 #define BTM_COD_MINOR_DESKTOP_WORKSTATION 0x04 259 #define BTM_COD_MINOR_SERVER_COMPUTER 0x08 260 #define BTM_COD_MINOR_LAPTOP 0x0C 261 #define BTM_COD_MINOR_HANDHELD_PC_PDA 0x10 /* clam shell */ 262 #define BTM_COD_MINOR_PALM_SIZE_PC_PDA 0x14 263 #define BTM_COD_MINOR_WEARABLE_COMPUTER 0x18 /* watch sized */ 264 265 /* minor device class field for Phone Major Class */ 266 /* #define BTM_COD_MINOR_UNCLASSIFIED 0x00 */ 267 #define BTM_COD_MINOR_CELLULAR 0x04 268 #define BTM_COD_MINOR_CORDLESS 0x08 269 #define BTM_COD_MINOR_SMART_PHONE 0x0C 270 #define BTM_COD_MINOR_WIRED_MDM_V_GTWY 0x10 /* wired modem or voice gatway */ 271 #define BTM_COD_MINOR_ISDN_ACCESS 0x14 272 273 /* minor device class field for LAN Access Point Major Class */ 274 /* Load Factor Field bit 5-7 */ 275 #define BTM_COD_MINOR_FULLY_AVAILABLE 0x00 276 #define BTM_COD_MINOR_1_17_UTILIZED 0x20 277 #define BTM_COD_MINOR_17_33_UTILIZED 0x40 278 #define BTM_COD_MINOR_33_50_UTILIZED 0x60 279 #define BTM_COD_MINOR_50_67_UTILIZED 0x80 280 #define BTM_COD_MINOR_67_83_UTILIZED 0xA0 281 #define BTM_COD_MINOR_83_99_UTILIZED 0xC0 282 #define BTM_COD_MINOR_NO_SERVICE_AVAILABLE 0xE0 283 /* sub-Field bit 2-4 */ 284 /* #define BTM_COD_MINOR_UNCLASSIFIED 0x00 */ 285 286 /* minor device class field for Audio/Video Major Class */ 287 /* #define BTM_COD_MINOR_UNCLASSIFIED 0x00 */ 288 #define BTM_COD_MINOR_CONFM_HEADSET 0x04 289 #define BTM_COD_MINOR_CONFM_HANDSFREE 0x08 290 #define BTM_COD_MINOR_MICROPHONE 0x10 291 #define BTM_COD_MINOR_LOUDSPEAKER 0x14 292 #define BTM_COD_MINOR_HEADPHONES 0x18 293 #define BTM_COD_MINOR_PORTABLE_AUDIO 0x1C 294 #define BTM_COD_MINOR_CAR_AUDIO 0x20 295 #define BTM_COD_MINOR_SET_TOP_BOX 0x24 296 #define BTM_COD_MINOR_HIFI_AUDIO 0x28 297 #define BTM_COD_MINOR_VCR 0x2C 298 #define BTM_COD_MINOR_VIDEO_CAMERA 0x30 299 #define BTM_COD_MINOR_CAMCORDER 0x34 300 #define BTM_COD_MINOR_VIDEO_MONITOR 0x38 301 #define BTM_COD_MINOR_VIDDISP_LDSPKR 0x3C 302 #define BTM_COD_MINOR_VIDEO_CONFERENCING 0x40 303 #define BTM_COD_MINOR_GAMING_TOY 0x48 304 305 /* minor device class field for Peripheral Major Class */ 306 /* Bits 6-7 independently specify mouse, keyboard, or combo mouse/keyboard */ 307 #define BTM_COD_MINOR_KEYBOARD 0x40 308 #define BTM_COD_MINOR_POINTING 0x80 309 #define BTM_COD_MINOR_COMBO 0xC0 310 /* Bits 2-5 OR'd with selection from bits 6-7 */ 311 /* #define BTM_COD_MINOR_UNCLASSIFIED 0x00 */ 312 #define BTM_COD_MINOR_JOYSTICK 0x04 313 #define BTM_COD_MINOR_GAMEPAD 0x08 314 #define BTM_COD_MINOR_REMOTE_CONTROL 0x0C 315 #define BTM_COD_MINOR_SENSING_DEVICE 0x10 316 #define BTM_COD_MINOR_DIGITIZING_TABLET 0x14 317 #define BTM_COD_MINOR_CARD_READER 0x18 /* e.g. SIM card reader */ 318 #define BTM_COD_MINOR_DIGITAL_PAN 0x1C 319 #define BTM_COD_MINOR_HAND_SCANNER 0x20 320 #define BTM_COD_MINOR_HAND_GESTURAL_INPUT 0x24 321 322 /* minor device class field for Imaging Major Class */ 323 /* Bits 5-7 independently specify display, camera, scanner, or printer */ 324 #define BTM_COD_MINOR_DISPLAY 0x10 325 #define BTM_COD_MINOR_CAMERA 0x20 326 #define BTM_COD_MINOR_SCANNER 0x40 327 #define BTM_COD_MINOR_PRINTER 0x80 328 /* Bits 2-3 Reserved */ 329 /* #define BTM_COD_MINOR_UNCLASSIFIED 0x00 */ 330 331 /* minor device class field for Wearable Major Class */ 332 /* Bits 2-7 meaningful */ 333 #define BTM_COD_MINOR_WRIST_WATCH 0x04 334 #define BTM_COD_MINOR_PAGER 0x08 335 #define BTM_COD_MINOR_JACKET 0x0C 336 #define BTM_COD_MINOR_HELMET 0x10 337 #define BTM_COD_MINOR_GLASSES 0x14 338 339 /* minor device class field for Toy Major Class */ 340 /* Bits 2-7 meaningful */ 341 #define BTM_COD_MINOR_ROBOT 0x04 342 #define BTM_COD_MINOR_VEHICLE 0x08 343 #define BTM_COD_MINOR_DOLL_ACTION_FIGURE 0x0C 344 #define BTM_COD_MINOR_CONTROLLER 0x10 345 #define BTM_COD_MINOR_GAME 0x14 346 347 /* minor device class field for Health Major Class */ 348 /* Bits 2-7 meaningful */ 349 #define BTM_COD_MINOR_BLOOD_MONITOR 0x04 350 #define BTM_COD_MINOR_THERMOMETER 0x08 351 #define BTM_COD_MINOR_WEIGHING_SCALE 0x0C 352 #define BTM_COD_MINOR_GLUCOSE_METER 0x10 353 #define BTM_COD_MINOR_PULSE_OXIMETER 0x14 354 #define BTM_COD_MINOR_HEART_PULSE_MONITOR 0x18 355 #define BTM_COD_MINOR_HEALTH_DATA_DISPLAY 0x1C 356 #define BTM_COD_MINOR_STEP_COUNTER 0x20 357 #define BTM_COD_MINOR_BODY_COM_ANALYZER 0x24 358 #define BTM_COD_MINOR_PEAK_FLOW_MONITOR 0x28 359 #define BTM_COD_MINOR_MEDICATION_MONITOR 0x2C 360 #define BTM_COD_MINOR_KNEE_PROSTHESIS 0x30 361 #define BTM_COD_MINOR_ANKLE_PROSTHESIS 0x34 362 363 364 /*************************** 365 ** major device class field 366 ****************************/ 367 #define BTM_COD_MAJOR_MISCELLANEOUS 0x00 368 #define BTM_COD_MAJOR_COMPUTER 0x01 369 #define BTM_COD_MAJOR_PHONE 0x02 370 #define BTM_COD_MAJOR_LAN_ACCESS_PT 0x03 371 #define BTM_COD_MAJOR_AUDIO 0x04 372 #define BTM_COD_MAJOR_PERIPHERAL 0x05 373 #define BTM_COD_MAJOR_IMAGING 0x06 374 #define BTM_COD_MAJOR_WEARABLE 0x07 375 #define BTM_COD_MAJOR_TOY 0x08 376 #define BTM_COD_MAJOR_HEALTH 0x09 377 #define BTM_COD_MAJOR_UNCLASSIFIED 0x1F 378 379 /*************************** 380 ** service class fields 381 ****************************/ 382 #define BTM_COD_SERVICE_LMTD_DISCOVER 0x0020 383 #define BTM_COD_SERVICE_POSITIONING 0x0100 384 #define BTM_COD_SERVICE_NETWORKING 0x0200 385 #define BTM_COD_SERVICE_RENDERING 0x0400 386 #define BTM_COD_SERVICE_CAPTURING 0x0800 387 #define BTM_COD_SERVICE_OBJ_TRANSFER 0x1000 388 #define BTM_COD_SERVICE_AUDIO 0x2000 389 #define BTM_COD_SERVICE_TELEPHONY 0x4000 390 #define BTM_COD_SERVICE_INFORMATION 0x8000 391 392 /* class of device field macros */ 393 #define BTM_COD_FORMAT_TYPE(u8, pd) {u8 = pd[2]&0x03;} 394 #define BTM_COD_MINOR_CLASS(u8, pd) {u8 = pd[2]&0xFC;} 395 #define BTM_COD_MAJOR_CLASS(u8, pd) {u8 = pd[1]&0x1F;} 396 #define BTM_COD_SERVICE_CLASS(u16, pd) {u16 = pd[0]; u16<<=8; u16 += pd[1]&0xE0;} 397 398 /* to set the fields (assumes that format type is always 0) */ 399 #define FIELDS_TO_COD(pd, mn, mj, sv) {pd[2] = mn; pd[1] = \ 400 mj+ ((sv)&BTM_COD_SERVICE_CLASS_LO_B); \ 401 pd[0] = (sv) >> 8;} 402 403 /* the COD masks */ 404 #define BTM_COD_FORMAT_TYPE_MASK 0x03 405 #define BTM_COD_MINOR_CLASS_MASK 0xFC 406 #define BTM_COD_MAJOR_CLASS_MASK 0x1F 407 #define BTM_COD_SERVICE_CLASS_LO_B 0x00E0 408 #define BTM_COD_SERVICE_CLASS_MASK 0xFFE0 409 410 411 /* BTM service definitions 412 ** Used for storing EIR data to bit mask 413 */ 414 #ifndef BTM_EIR_UUID_LKUP_TBL 415 enum 416 { 417 BTM_EIR_UUID_SERVCLASS_SERVICE_DISCOVERY_SERVER, 418 /* BTM_EIR_UUID_SERVCLASS_BROWSE_GROUP_DESCRIPTOR, */ 419 /* BTM_EIR_UUID_SERVCLASS_PUBLIC_BROWSE_GROUP, */ 420 BTM_EIR_UUID_SERVCLASS_SERIAL_PORT, 421 BTM_EIR_UUID_SERVCLASS_LAN_ACCESS_USING_PPP, 422 BTM_EIR_UUID_SERVCLASS_DIALUP_NETWORKING, 423 BTM_EIR_UUID_SERVCLASS_IRMC_SYNC, 424 BTM_EIR_UUID_SERVCLASS_OBEX_OBJECT_PUSH, 425 BTM_EIR_UUID_SERVCLASS_OBEX_FILE_TRANSFER, 426 BTM_EIR_UUID_SERVCLASS_IRMC_SYNC_COMMAND, 427 BTM_EIR_UUID_SERVCLASS_HEADSET, 428 BTM_EIR_UUID_SERVCLASS_CORDLESS_TELEPHONY, 429 BTM_EIR_UUID_SERVCLASS_AUDIO_SOURCE, 430 BTM_EIR_UUID_SERVCLASS_AUDIO_SINK, 431 BTM_EIR_UUID_SERVCLASS_AV_REM_CTRL_TARGET, 432 /* BTM_EIR_UUID_SERVCLASS_ADV_AUDIO_DISTRIBUTION, */ 433 BTM_EIR_UUID_SERVCLASS_AV_REMOTE_CONTROL, 434 /* BTM_EIR_UUID_SERVCLASS_VIDEO_CONFERENCING, */ 435 BTM_EIR_UUID_SERVCLASS_INTERCOM, 436 BTM_EIR_UUID_SERVCLASS_FAX, 437 BTM_EIR_UUID_SERVCLASS_HEADSET_AUDIO_GATEWAY, 438 /* BTM_EIR_UUID_SERVCLASS_WAP, */ 439 /* BTM_EIR_UUID_SERVCLASS_WAP_CLIENT, */ 440 BTM_EIR_UUID_SERVCLASS_PANU, 441 BTM_EIR_UUID_SERVCLASS_NAP, 442 BTM_EIR_UUID_SERVCLASS_GN, 443 BTM_EIR_UUID_SERVCLASS_DIRECT_PRINTING, 444 /* BTM_EIR_UUID_SERVCLASS_REFERENCE_PRINTING, */ 445 BTM_EIR_UUID_SERVCLASS_IMAGING, 446 BTM_EIR_UUID_SERVCLASS_IMAGING_RESPONDER, 447 BTM_EIR_UUID_SERVCLASS_IMAGING_AUTO_ARCHIVE, 448 BTM_EIR_UUID_SERVCLASS_IMAGING_REF_OBJECTS, 449 BTM_EIR_UUID_SERVCLASS_HF_HANDSFREE, 450 BTM_EIR_UUID_SERVCLASS_AG_HANDSFREE, 451 BTM_EIR_UUID_SERVCLASS_DIR_PRT_REF_OBJ_SERVICE, 452 /* BTM_EIR_UUID_SERVCLASS_REFLECTED_UI, */ 453 BTM_EIR_UUID_SERVCLASS_BASIC_PRINTING, 454 BTM_EIR_UUID_SERVCLASS_PRINTING_STATUS, 455 BTM_EIR_UUID_SERVCLASS_HUMAN_INTERFACE, 456 BTM_EIR_UUID_SERVCLASS_CABLE_REPLACEMENT, 457 BTM_EIR_UUID_SERVCLASS_HCRP_PRINT, 458 BTM_EIR_UUID_SERVCLASS_HCRP_SCAN, 459 /* BTM_EIR_UUID_SERVCLASS_COMMON_ISDN_ACCESS, */ 460 /* BTM_EIR_UUID_SERVCLASS_VIDEO_CONFERENCING_GW, */ 461 /* BTM_EIR_UUID_SERVCLASS_UDI_MT, */ 462 /* BTM_EIR_UUID_SERVCLASS_UDI_TA, */ 463 /* BTM_EIR_UUID_SERVCLASS_VCP, */ 464 BTM_EIR_UUID_SERVCLASS_SAP, 465 BTM_EIR_UUID_SERVCLASS_PBAP_PCE, 466 BTM_EIR_UUID_SERVCLASS_PBAP_PSE, 467 /* BTM_EIR_UUID_SERVCLASS_TE_PHONE_ACCESS, */ 468 /* BTM_EIR_UUID_SERVCLASS_ME_PHONE_ACCESS, */ 469 BTM_EIR_UUID_SERVCLASS_PHONE_ACCESS, 470 BTM_EIR_UUID_SERVCLASS_HEADSET_HS, 471 BTM_EIR_UUID_SERVCLASS_PNP_INFORMATION, 472 /* BTM_EIR_UUID_SERVCLASS_GENERIC_NETWORKING, */ 473 /* BTM_EIR_UUID_SERVCLASS_GENERIC_FILETRANSFER, */ 474 /* BTM_EIR_UUID_SERVCLASS_GENERIC_AUDIO, */ 475 /* BTM_EIR_UUID_SERVCLASS_GENERIC_TELEPHONY, */ 476 /* BTM_EIR_UUID_SERVCLASS_UPNP_SERVICE, */ 477 /* BTM_EIR_UUID_SERVCLASS_UPNP_IP_SERVICE, */ 478 /* BTM_EIR_UUID_SERVCLASS_ESDP_UPNP_IP_PAN, */ 479 /* BTM_EIR_UUID_SERVCLASS_ESDP_UPNP_IP_LAP, */ 480 /* BTM_EIR_UUID_SERVCLASS_ESDP_UPNP_IP_L2CAP, */ 481 BTM_EIR_UUID_SERVCLASS_VIDEO_SOURCE, 482 BTM_EIR_UUID_SERVCLASS_VIDEO_SINK, 483 /* BTM_EIR_UUID_SERVCLASS_VIDEO_DISTRIBUTION */ 484 /* BTM_EIR_UUID_SERVCLASS_HDP_PROFILE */ 485 BTM_EIR_UUID_SERVCLASS_MESSAGE_ACCESS, 486 BTM_EIR_UUID_SERVCLASS_MESSAGE_NOTIFICATION, 487 BTM_EIR_UUID_SERVCLASS_HDP_SOURCE, 488 BTM_EIR_UUID_SERVCLASS_HDP_SINK, 489 BTM_EIR_MAX_SERVICES 490 }; 491 #endif /* BTM_EIR_UUID_LKUP_TBL */ 492 493 /* search result in EIR of inquiry database */ 494 #define BTM_EIR_FOUND 0 495 #define BTM_EIR_NOT_FOUND 1 496 #define BTM_EIR_UNKNOWN 2 497 498 typedef UINT8 tBTM_EIR_SEARCH_RESULT; 499 500 #define BTM_EIR_FLAGS_TYPE HCI_EIR_FLAGS_TYPE /* 0x01 */ 501 #define BTM_EIR_MORE_16BITS_UUID_TYPE HCI_EIR_MORE_16BITS_UUID_TYPE /* 0x02 */ 502 #define BTM_EIR_COMPLETE_16BITS_UUID_TYPE HCI_EIR_COMPLETE_16BITS_UUID_TYPE /* 0x03 */ 503 #define BTM_EIR_MORE_32BITS_UUID_TYPE HCI_EIR_MORE_32BITS_UUID_TYPE /* 0x04 */ 504 #define BTM_EIR_COMPLETE_32BITS_UUID_TYPE HCI_EIR_COMPLETE_32BITS_UUID_TYPE /* 0x05 */ 505 #define BTM_EIR_MORE_128BITS_UUID_TYPE HCI_EIR_MORE_128BITS_UUID_TYPE /* 0x06 */ 506 #define BTM_EIR_COMPLETE_128BITS_UUID_TYPE HCI_EIR_COMPLETE_128BITS_UUID_TYPE /* 0x07 */ 507 #define BTM_EIR_SHORTENED_LOCAL_NAME_TYPE HCI_EIR_SHORTENED_LOCAL_NAME_TYPE /* 0x08 */ 508 #define BTM_EIR_COMPLETE_LOCAL_NAME_TYPE HCI_EIR_COMPLETE_LOCAL_NAME_TYPE /* 0x09 */ 509 #define BTM_EIR_TX_POWER_LEVEL_TYPE HCI_EIR_TX_POWER_LEVEL_TYPE /* 0x0A */ 510 #define BTM_EIR_MANUFACTURER_SPECIFIC_TYPE HCI_EIR_MANUFACTURER_SPECIFIC_TYPE /* 0xFF */ 511 512 /* the following EIR tags are defined to OOB, not regular EIR data */ 513 #define BTM_EIR_OOB_BD_ADDR_TYPE HCI_EIR_OOB_BD_ADDR_TYPE /* 6 bytes */ 514 #define BTM_EIR_OOB_COD_TYPE HCI_EIR_OOB_COD_TYPE /* 3 bytes */ 515 #define BTM_EIR_OOB_SSP_HASH_C_TYPE HCI_EIR_OOB_SSP_HASH_C_TYPE /* 16 bytes */ 516 #define BTM_EIR_OOB_SSP_RAND_R_TYPE HCI_EIR_OOB_SSP_RAND_R_TYPE /* 16 bytes */ 517 518 #define BTM_OOB_MANDATORY_SIZE 8 /* include 2 bytes length & 6 bytes bd_addr */ 519 #define BTM_OOB_DATA_LEN_SIZE 2 520 #define BTM_OOB_BD_ADDR_SIZE 6 521 #define BTM_OOB_COD_SIZE BT_OOB_COD_SIZE 522 #define BTM_OOB_HASH_C_SIZE BT_OOB_HASH_C_SIZE 523 #define BTM_OOB_RAND_R_SIZE BT_OOB_RAND_R_SIZE 524 525 526 #if BLE_INCLUDED == TRUE 527 #define BTM_BLE_SEC_NONE 0 528 #define BTM_BLE_SEC_ENCRYPT 1 /* encrypt the link using current key */ 529 #define BTM_BLE_SEC_ENCRYPT_NO_MITM 2 530 #define BTM_BLE_SEC_ENCRYPT_MITM 3 531 typedef UINT8 tBTM_BLE_SEC_ACT; 532 #endif 533 /************************************************************************************************ 534 ** BTM Services MACROS handle array of UINT32 bits for more than 32 services 535 *************************************************************************************************/ 536 /* Determine the number of UINT32's necessary for services */ 537 #define BTM_EIR_ARRAY_BITS 32 /* Number of bits in each array element */ 538 #define BTM_EIR_SERVICE_ARRAY_SIZE (((UINT32)BTM_EIR_MAX_SERVICES / BTM_EIR_ARRAY_BITS) + \ 539 (((UINT32)BTM_EIR_MAX_SERVICES % BTM_EIR_ARRAY_BITS) ? 1 : 0)) 540 541 /* MACRO to set the service bit mask in a bit stream */ 542 #define BTM_EIR_SET_SERVICE(p, service) (((UINT32 *)(p))[(((UINT32)(service)) / BTM_EIR_ARRAY_BITS)] |= \ 543 ((UINT32)1 << (((UINT32)(service)) % BTM_EIR_ARRAY_BITS))) 544 545 546 /* MACRO to clear the service bit mask in a bit stream */ 547 #define BTM_EIR_CLR_SERVICE(p, service) (((UINT32 *)(p))[(((UINT32)(service)) / BTM_EIR_ARRAY_BITS)] &= \ 548 ~((UINT32)1 << (((UINT32)(service)) % BTM_EIR_ARRAY_BITS))) 549 550 /* MACRO to check the service bit mask in a bit stream */ 551 #define BTM_EIR_HAS_SERVICE(p, service) ((((UINT32 *)(p))[(((UINT32)(service)) / BTM_EIR_ARRAY_BITS)] & \ 552 ((UINT32)1 << (((UINT32)(service)) % BTM_EIR_ARRAY_BITS))) >> (((UINT32)(service)) % BTM_EIR_ARRAY_BITS)) 553 554 /* start of EIR in HCI buffer, 4 bytes = HCI Command(2) + Length(1) + FEC_Req(1) */ 555 #define BTM_HCI_EIR_OFFSET (BT_HDR_SIZE + 4) 556 557 /*************************** 558 ** Device Discovery Types 559 ****************************/ 560 /* Definitions of the parameters passed to BTM_StartInquiry and 561 ** BTM_SetPeriodicInquiryMode. 562 */ 563 typedef struct /* contains the two device class condition fields */ 564 { 565 DEV_CLASS dev_class; 566 DEV_CLASS dev_class_mask; 567 } tBTM_COD_COND; 568 569 570 typedef union /* contains the inquiry filter condition */ 571 { 572 BD_ADDR bdaddr_cond; 573 tBTM_COD_COND cod_cond; 574 } tBTM_INQ_FILT_COND; 575 576 577 typedef struct /* contains the parameters passed to the inquiry functions */ 578 { 579 UINT8 mode; /* general or limited */ 580 UINT8 duration; /* duration of the inquiry (1.28 sec increments) */ 581 UINT8 max_resps; /* maximum number of responses to return */ 582 BOOLEAN report_dup; /* report duplicated inquiry response with higher RSSI value */ 583 UINT8 filter_cond_type; /* new devices, BD ADDR, COD, or No filtering */ 584 tBTM_INQ_FILT_COND filter_cond; /* filter value based on filter cond type */ 585 #if (defined(BTA_HOST_INTERLEAVE_SEARCH) && BTA_HOST_INTERLEAVE_SEARCH == TRUE) 586 UINT8 intl_duration[4]; /*duration array storing the interleave scan's time portions*/ 587 #endif 588 } tBTM_INQ_PARMS; 589 590 #define BTM_INQ_RESULT_BR 0x01 591 #define BTM_INQ_RESULT_BLE 0x02 592 593 #if (BLE_INCLUDED == TRUE) 594 #define BTM_BLE_EVT_CONN_ADV 0x00 595 #define BTM_BLE_EVT_CONN_DIR_ADV 0x01 596 #define BTM_BLE_EVT_DISC_ADV 0x02 597 #define BTM_BLE_EVT_NON_CONN_ADV 0x03 598 #define BTM_BLE_EVT_SCAN_RSP 0x04 599 typedef UINT8 tBTM_BLE_EVT_TYPE; 600 #endif 601 602 /* These are the fields returned in each device's response to the inquiry. It 603 ** is returned in the results callback if registered. 604 */ 605 typedef struct 606 { 607 UINT16 clock_offset; 608 BD_ADDR remote_bd_addr; 609 DEV_CLASS dev_class; 610 UINT8 page_scan_rep_mode; 611 UINT8 page_scan_per_mode; 612 UINT8 page_scan_mode; 613 INT8 rssi; /* Set to BTM_INQ_RES_IGNORE_RSSI if not valid */ 614 #if (BTM_EIR_CLIENT_INCLUDED == TRUE) 615 UINT32 eir_uuid[BTM_EIR_SERVICE_ARRAY_SIZE]; 616 BOOLEAN eir_complete_list; 617 #endif 618 #if (BLE_INCLUDED == TRUE) 619 tBT_DEVICE_TYPE device_type; 620 UINT8 inq_result_type; 621 UINT8 ble_addr_type; 622 tBTM_BLE_EVT_TYPE ble_evt_type; 623 UINT8 flag; 624 #endif 625 } tBTM_INQ_RESULTS; 626 627 628 /* This is the inquiry response information held in its database by BTM, and available 629 ** to applications via BTM_InqDbRead, BTM_InqDbFirst, and BTM_InqDbNext. 630 */ 631 typedef struct 632 { 633 tBTM_INQ_RESULTS results; 634 635 BOOLEAN appl_knows_rem_name; /* set by application if it knows the remote name of the peer device. 636 This is later used by application to determine if remote name request is 637 required to be done. Having the flag here avoid duplicate store of inquiry results */ 638 639 640 #if (BTM_INQ_GET_REMOTE_NAME == TRUE || BLE_INCLUDED == TRUE) 641 UINT16 remote_name_len; 642 tBTM_BD_NAME remote_name; 643 UINT8 remote_name_state; 644 UINT8 remote_name_type; 645 #endif 646 647 } tBTM_INQ_INFO; 648 649 650 /* Structure returned with inquiry complete callback */ 651 typedef struct 652 { 653 tBTM_STATUS status; 654 UINT8 num_resp; /* Number of results from the current inquiry */ 655 } tBTM_INQUIRY_CMPL; 656 657 658 /* Structure returned with remote name request */ 659 typedef struct 660 { 661 UINT16 status; 662 UINT16 length; 663 BD_NAME remote_bd_name; 664 } tBTM_REMOTE_DEV_NAME; 665 666 typedef struct 667 { 668 UINT8 pcm_intf_rate; /* PCM interface rate: 0: 128kbps, 1: 256 kbps; 669 2:512 bps; 3: 1024kbps; 4: 2048kbps */ 670 UINT8 frame_type; /* frame type: 0: short; 1: long */ 671 UINT8 sync_mode; /* sync mode: 0: slave; 1: master */ 672 UINT8 clock_mode; /* clock mode: 0: slave; 1: master */ 673 674 }tBTM_SCO_PCM_PARAM; 675 676 /**************************************** 677 ** Device Discovery Callback Functions 678 *****************************************/ 679 /* Callback function for asynchronous notifications when the BTM inquiry DB 680 ** changes. First param is inquiry database, second is if added to or removed 681 ** from the inquiry database. 682 */ 683 typedef void (tBTM_INQ_DB_CHANGE_CB) (void *p1, BOOLEAN is_new); 684 685 /* Callback function for notifications when the BTM gets inquiry response. 686 ** First param is inquiry results database, second is pointer of EIR. 687 */ 688 typedef void (tBTM_INQ_RESULTS_CB) (tBTM_INQ_RESULTS *p_inq_results, UINT8 *p_eir); 689 690 /***************************************************************************** 691 ** ACL CHANNEL MANAGEMENT 692 *****************************************************************************/ 693 /****************** 694 ** ACL Constants 695 *******************/ 696 697 /* ACL modes */ 698 #define BTM_ACL_MODE_NORMAL HCI_MODE_ACTIVE 699 #define BTM_ACL_MODE_HOLD HCI_MODE_HOLD 700 #define BTM_ACL_MODE_SNIFF HCI_MODE_SNIFF 701 #define BTM_ACL_MODE_PARK HCI_MODE_PARK 702 703 /* Returned with structure in role switch callback (tBTM_ROLE_SWITCH_CMPL) */ 704 #define BTM_ROLE_MASTER HCI_ROLE_MASTER 705 #define BTM_ROLE_SLAVE HCI_ROLE_SLAVE 706 #define BTM_ROLE_UNDEFINED 0xff /* undefined value (error status) */ 707 708 /* ACL Packet Types */ 709 #define BTM_ACL_PKT_TYPES_MASK_DM1 HCI_PKT_TYPES_MASK_DM1 710 #define BTM_ACL_PKT_TYPES_MASK_DH1 HCI_PKT_TYPES_MASK_DH1 711 #define BTM_ACL_PKT_TYPES_MASK_DM3 HCI_PKT_TYPES_MASK_DM3 712 #define BTM_ACL_PKT_TYPES_MASK_DH3 HCI_PKT_TYPES_MASK_DH3 713 #define BTM_ACL_PKT_TYPES_MASK_DM5 HCI_PKT_TYPES_MASK_DM5 714 #define BTM_ACL_PKT_TYPES_MASK_DH5 HCI_PKT_TYPES_MASK_DH5 715 #define BTM_ACL_PKT_TYPES_MASK_NO_2_DH1 HCI_PKT_TYPES_MASK_NO_2_DH1 716 #define BTM_ACL_PKT_TYPES_MASK_NO_3_DH1 HCI_PKT_TYPES_MASK_NO_3_DH1 717 #define BTM_ACL_PKT_TYPES_MASK_NO_2_DH3 HCI_PKT_TYPES_MASK_NO_2_DH3 718 #define BTM_ACL_PKT_TYPES_MASK_NO_3_DH3 HCI_PKT_TYPES_MASK_NO_3_DH3 719 #define BTM_ACL_PKT_TYPES_MASK_NO_2_DH5 HCI_PKT_TYPES_MASK_NO_2_DH5 720 #define BTM_ACL_PKT_TYPES_MASK_NO_3_DH5 HCI_PKT_TYPES_MASK_NO_3_DH5 721 722 /*************** 723 ** ACL Types 724 ****************/ 725 726 /* Structure returned with link policy information (in tBTM_CMPL_CB callback function) 727 ** in response to BTM_ReadLinkPolicy call. 728 */ 729 typedef struct 730 { 731 tBTM_STATUS status; 732 UINT8 hci_status; 733 BD_ADDR rem_bda; 734 UINT16 settings; 735 } tBTM_LNK_POLICY_RESULTS; 736 737 /* Structure returned with Role Switch information (in tBTM_CMPL_CB callback function) 738 ** in response to BTM_SwitchRole call. 739 */ 740 typedef struct 741 { 742 UINT8 hci_status; /* HCI status returned with the event */ 743 UINT8 role; /* BTM_ROLE_MASTER or BTM_ROLE_SLAVE */ 744 BD_ADDR remote_bd_addr; /* Remote BD addr involved with the switch */ 745 } tBTM_ROLE_SWITCH_CMPL; 746 747 748 /* Structure returned with Change Link Key information (in tBTM_CMPL_CB callback function) 749 ** in response to BTM_ChangeLinkKey call. 750 */ 751 typedef struct 752 { 753 UINT8 hci_status; /* HCI status returned with the event */ 754 BD_ADDR remote_bd_addr; /* Remote BD addr involved with the change link key */ 755 } tBTM_CHANGE_KEY_CMPL; 756 757 758 /* Structure returned with QoS information (in tBTM_CMPL_CB callback function) 759 ** in response to BTM_SetQoS call. 760 */ 761 typedef struct 762 { 763 FLOW_SPEC flow; 764 UINT16 handle; 765 UINT8 status; 766 } tBTM_QOS_SETUP_CMPL; 767 768 769 /* Structure returned with read RSSI event (in tBTM_CMPL_CB callback function) 770 ** in response to BTM_ReadRSSI call. 771 */ 772 typedef struct 773 { 774 tBTM_STATUS status; 775 UINT8 hci_status; 776 INT8 rssi; 777 BD_ADDR rem_bda; 778 } tBTM_RSSI_RESULTS; 779 780 /* Structure returned with read current TX power event (in tBTM_CMPL_CB callback function) 781 ** in response to BTM_ReadTxPower call. 782 */ 783 typedef struct 784 { 785 tBTM_STATUS status; 786 UINT8 hci_status; 787 INT8 tx_power; 788 BD_ADDR rem_bda; 789 } tBTM_TX_POWER_RESULTS; 790 791 /* Structure returned with read link quality event (in tBTM_CMPL_CB callback function) 792 ** in response to BTM_ReadLinkQuality call. 793 */ 794 typedef struct 795 { 796 tBTM_STATUS status; 797 UINT8 hci_status; 798 UINT8 link_quality; 799 BD_ADDR rem_bda; 800 } tBTM_LINK_QUALITY_RESULTS; 801 802 /* Structure returned with read inq tx power quality event (in tBTM_CMPL_CB callback function) 803 ** in response to BTM_ReadInquiryRspTxPower call. 804 */ 805 typedef struct 806 { 807 tBTM_STATUS status; 808 UINT8 hci_status; 809 INT8 tx_power; 810 } tBTM_INQ_TXPWR_RESULTS; 811 812 enum 813 { 814 BTM_BL_CONN_EVT, 815 BTM_BL_DISCN_EVT, 816 BTM_BL_UPDATE_EVT, 817 BTM_BL_ROLE_CHG_EVT, 818 BTM_BL_COLLISION_EVT 819 }; 820 typedef UINT8 tBTM_BL_EVENT; 821 typedef UINT16 tBTM_BL_EVENT_MASK; 822 823 #define BTM_BL_CONN_MASK 0x0001 824 #define BTM_BL_DISCN_MASK 0x0002 825 #define BTM_BL_UPDATE_MASK 0x0004 826 #define BTM_BL_ROLE_CHG_MASK 0x0008 827 828 /* Device features mask definitions */ 829 #define BTM_FEATURE_BYTES_PER_PAGE HCI_FEATURE_BYTES_PER_PAGE 830 #define BTM_EXT_FEATURES_PAGE_MAX HCI_EXT_FEATURES_PAGE_MAX 831 832 /* the data type associated with BTM_BL_CONN_EVT */ 833 typedef struct 834 { 835 tBTM_BL_EVENT event; /* The event reported. */ 836 BD_ADDR_PTR p_bda; /* The address of the newly connected device */ 837 DEV_CLASS_PTR p_dc; /* The device class */ 838 BD_NAME_PTR p_bdn; /* The device name */ 839 UINT8 *p_features; /* pointer to the remote device's features page[0] (supported features page) */ 840 } tBTM_BL_CONN_DATA; 841 842 /* the data type associated with BTM_BL_DISCN_EVT */ 843 typedef struct 844 { 845 tBTM_BL_EVENT event; /* The event reported. */ 846 BD_ADDR_PTR p_bda; /* The address of the disconnected device */ 847 } tBTM_BL_DISCN_DATA; 848 849 /* Busy-Level shall have the inquiry_paging mask set when 850 * inquiry/paging is in progress, Else the number of ACL links */ 851 #define BTM_BL_INQUIRY_PAGING_MASK 0x10 852 #define BTM_BL_INQUIRY_STARTED (BTM_BL_INQUIRY_PAGING_MASK | 0x1) 853 #define BTM_BL_INQUIRY_CANCELLED (BTM_BL_INQUIRY_PAGING_MASK | 0x2) 854 #define BTM_BL_INQUIRY_COMPLETE (BTM_BL_INQUIRY_PAGING_MASK | 0x3) 855 #define BTM_BL_PAGING_STARTED (BTM_BL_INQUIRY_PAGING_MASK | 0x4) 856 #define BTM_BL_PAGING_COMPLETE (BTM_BL_INQUIRY_PAGING_MASK | 0x5) 857 /* the data type associated with BTM_BL_UPDATE_EVT */ 858 typedef struct 859 { 860 tBTM_BL_EVENT event; /* The event reported. */ 861 UINT8 busy_level;/* when paging or inquiring, level is 10. 862 * Otherwise, the number of ACL links. */ 863 UINT8 busy_level_flags; /* Notifies actual inquiry/page activities */ 864 } tBTM_BL_UPDATE_DATA; 865 866 /* the data type associated with BTM_BL_ROLE_CHG_EVT */ 867 typedef struct 868 { 869 tBTM_BL_EVENT event; /* The event reported. */ 870 BD_ADDR_PTR p_bda; /* The address of the peer connected device */ 871 UINT8 new_role; 872 UINT8 hci_status; /* HCI status returned with the event */ 873 } tBTM_BL_ROLE_CHG_DATA; 874 875 typedef union 876 { 877 tBTM_BL_EVENT event; /* The event reported. */ 878 tBTM_BL_CONN_DATA conn; /* The data associated with BTM_BL_CONN_EVT */ 879 tBTM_BL_DISCN_DATA discn; /* The data associated with BTM_BL_DISCN_EVT */ 880 tBTM_BL_UPDATE_DATA update; /* The data associated with BTM_BL_UPDATE_EVT */ 881 tBTM_BL_ROLE_CHG_DATA role_chg;/*The data associated with BTM_BL_ROLE_CHG_EVT */ 882 } tBTM_BL_EVENT_DATA; 883 884 /* Callback function for notifications when the BTM busy level 885 ** changes. 886 */ 887 typedef void (tBTM_BL_CHANGE_CB) (tBTM_BL_EVENT_DATA *p_data); 888 889 /*************************** 890 ** ACL Callback Functions 891 ****************************/ 892 /* Callback function for notifications when the BTM ACL connection DB 893 ** changes. First param is BD address, second is if added or removed. 894 ** Registered through BTM_AclRegisterForChanges call. 895 */ 896 typedef void (tBTM_ACL_DB_CHANGE_CB) (BD_ADDR p_bda, DEV_CLASS p_dc, 897 BD_NAME p_bdn, UINT8 *features, 898 BOOLEAN is_new); 899 900 /***************************************************************************** 901 ** SCO CHANNEL MANAGEMENT 902 *****************************************************************************/ 903 /****************** 904 ** SCO Constants 905 *******************/ 906 907 /* Define an invalid SCO index and an invalid HCI handle */ 908 #define BTM_INVALID_SCO_INDEX 0xFFFF 909 #define BTM_INVALID_HCI_HANDLE 0xFFFF 910 911 /* Define an invalid SCO disconnect reason */ 912 #define BTM_INVALID_SCO_DISC_REASON 0xFFFF 913 914 /* Define first active SCO index */ 915 #define BTM_FIRST_ACTIVE_SCO_INDEX BTM_MAX_SCO_LINKS 916 917 /* Define SCO packet types used in APIs */ 918 #define BTM_SCO_PKT_TYPES_MASK_HV1 HCI_ESCO_PKT_TYPES_MASK_HV1 919 #define BTM_SCO_PKT_TYPES_MASK_HV2 HCI_ESCO_PKT_TYPES_MASK_HV2 920 #define BTM_SCO_PKT_TYPES_MASK_HV3 HCI_ESCO_PKT_TYPES_MASK_HV3 921 #define BTM_SCO_PKT_TYPES_MASK_EV3 HCI_ESCO_PKT_TYPES_MASK_EV3 922 #define BTM_SCO_PKT_TYPES_MASK_EV4 HCI_ESCO_PKT_TYPES_MASK_EV4 923 #define BTM_SCO_PKT_TYPES_MASK_EV5 HCI_ESCO_PKT_TYPES_MASK_EV5 924 #define BTM_SCO_PKT_TYPES_MASK_NO_2_EV3 HCI_ESCO_PKT_TYPES_MASK_NO_2_EV3 925 #define BTM_SCO_PKT_TYPES_MASK_NO_3_EV3 HCI_ESCO_PKT_TYPES_MASK_NO_3_EV3 926 #define BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 HCI_ESCO_PKT_TYPES_MASK_NO_2_EV5 927 #define BTM_SCO_PKT_TYPES_MASK_NO_3_EV5 HCI_ESCO_PKT_TYPES_MASK_NO_3_EV5 928 929 #define BTM_SCO_LINK_ONLY_MASK (BTM_SCO_PKT_TYPES_MASK_HV1 | \ 930 BTM_SCO_PKT_TYPES_MASK_HV2 | \ 931 BTM_SCO_PKT_TYPES_MASK_HV3) 932 933 #define BTM_ESCO_LINK_ONLY_MASK (BTM_SCO_PKT_TYPES_MASK_EV3 | \ 934 BTM_SCO_PKT_TYPES_MASK_EV4 | \ 935 BTM_SCO_PKT_TYPES_MASK_EV5) 936 937 #define BTM_SCO_LINK_ALL_PKT_MASK (BTM_SCO_LINK_ONLY_MASK | \ 938 BTM_ESCO_LINK_ONLY_MASK) 939 940 #define BTM_VALID_SCO_ALL_PKT_TYPE HCI_VALID_SCO_ALL_PKT_TYPE 941 942 /* Passed in BTM_CreateSco if the packet type parameter should be ignored */ 943 #define BTM_IGNORE_SCO_PKT_TYPE 0 944 945 /*************** 946 ** SCO Types 947 ****************/ 948 #define BTM_LINK_TYPE_SCO HCI_LINK_TYPE_SCO 949 #define BTM_LINK_TYPE_ESCO HCI_LINK_TYPE_ESCO 950 typedef UINT8 tBTM_SCO_TYPE; 951 952 953 /******************* 954 ** SCO Routing Path 955 ********************/ 956 #define BTM_SCO_ROUTE_PCM HCI_BRCM_SCO_ROUTE_PCM 957 #define BTM_SCO_ROUTE_HCI HCI_BRCM_SCO_ROUTE_HCI 958 typedef UINT8 tBTM_SCO_ROUTE_TYPE; 959 960 961 /******************* 962 ** SCO Codec Types 963 ********************/ 964 #define BTM_SCO_CODEC_NONE 0x0000 965 #define BTM_SCO_CODEC_CVSD 0x0001 966 #define BTM_SCO_CODEC_MSBC 0x0002 967 typedef UINT16 tBTM_SCO_CODEC_TYPE; 968 969 970 971 /******************* 972 ** SCO Air Mode Types 973 ********************/ 974 #define BTM_SCO_AIR_MODE_U_LAW 0 975 #define BTM_SCO_AIR_MODE_A_LAW 1 976 #define BTM_SCO_AIR_MODE_CVSD 2 977 #define BTM_SCO_AIR_MODE_TRANSPNT 3 978 typedef UINT8 tBTM_SCO_AIR_MODE_TYPE; 979 980 /******************* 981 ** SCO Voice Settings 982 ********************/ 983 #define BTM_VOICE_SETTING_CVSD ((UINT16) (HCI_INP_CODING_LINEAR | \ 984 HCI_INP_DATA_FMT_2S_COMPLEMENT | \ 985 HCI_INP_SAMPLE_SIZE_16BIT | \ 986 HCI_AIR_CODING_FORMAT_CVSD)) 987 988 #define BTM_VOICE_SETTING_TRANS ((UINT16) (HCI_INP_CODING_LINEAR | \ 989 HCI_INP_DATA_FMT_2S_COMPLEMENT | \ 990 HCI_INP_SAMPLE_SIZE_16BIT | \ 991 HCI_AIR_CODING_FORMAT_TRANSPNT)) 992 993 /******************* 994 ** SCO Data Status 995 ********************/ 996 enum 997 { 998 BTM_SCO_DATA_CORRECT, 999 BTM_SCO_DATA_PAR_ERR, 1000 BTM_SCO_DATA_NONE, 1001 BTM_SCO_DATA_PAR_LOST 1002 }; 1003 typedef UINT8 tBTM_SCO_DATA_FLAG; 1004 1005 /*************************** 1006 ** SCO Callback Functions 1007 ****************************/ 1008 typedef void (tBTM_SCO_CB) (UINT16 sco_inx); 1009 typedef void (tBTM_SCO_DATA_CB) (UINT16 sco_inx, BT_HDR *p_data, tBTM_SCO_DATA_FLAG status); 1010 1011 /****************** 1012 ** eSCO Constants 1013 *******************/ 1014 #define BTM_64KBITS_RATE 0x00001f40 /* 64 kbits/sec data rate */ 1015 1016 /* Retransmission effort */ 1017 #define BTM_ESCO_RETRANS_OFF 0 1018 #define BTM_ESCO_RETRANS_POWER 1 1019 #define BTM_ESCO_RETRANS_QUALITY 2 1020 #define BTM_ESCO_RETRANS_DONTCARE 0xff 1021 1022 /* Max Latency Don't Care */ 1023 #define BTM_ESCO_MAX_LAT_DONTCARE 0xffff 1024 1025 /*************** 1026 ** eSCO Types 1027 ****************/ 1028 /* tBTM_ESCO_CBACK event types */ 1029 #define BTM_ESCO_CHG_EVT 1 1030 #define BTM_ESCO_CONN_REQ_EVT 2 1031 typedef UINT8 tBTM_ESCO_EVT; 1032 1033 /* Passed into BTM_SetEScoMode() */ 1034 typedef struct 1035 { 1036 UINT32 tx_bw; 1037 UINT32 rx_bw; 1038 UINT16 max_latency; 1039 UINT16 voice_contfmt; /* Voice Settings or Content Format */ 1040 UINT16 packet_types; 1041 UINT8 retrans_effort; 1042 } tBTM_ESCO_PARAMS; 1043 1044 typedef struct 1045 { 1046 UINT16 max_latency; 1047 UINT16 packet_types; 1048 UINT8 retrans_effort; 1049 } tBTM_CHG_ESCO_PARAMS; 1050 1051 /* Returned by BTM_ReadEScoLinkParms() */ 1052 typedef struct 1053 { 1054 UINT16 rx_pkt_len; 1055 UINT16 tx_pkt_len; 1056 BD_ADDR bd_addr; 1057 UINT8 link_type; /* BTM_LINK_TYPE_SCO or BTM_LINK_TYPE_ESCO */ 1058 UINT8 tx_interval; 1059 UINT8 retrans_window; 1060 UINT8 air_mode; 1061 } tBTM_ESCO_DATA; 1062 1063 typedef struct 1064 { 1065 UINT16 sco_inx; 1066 UINT16 rx_pkt_len; 1067 UINT16 tx_pkt_len; 1068 BD_ADDR bd_addr; 1069 UINT8 hci_status; 1070 UINT8 tx_interval; 1071 UINT8 retrans_window; 1072 } tBTM_CHG_ESCO_EVT_DATA; 1073 1074 typedef struct 1075 { 1076 UINT16 sco_inx; 1077 BD_ADDR bd_addr; 1078 DEV_CLASS dev_class; 1079 tBTM_SCO_TYPE link_type; 1080 } tBTM_ESCO_CONN_REQ_EVT_DATA; 1081 1082 typedef union 1083 { 1084 tBTM_CHG_ESCO_EVT_DATA chg_evt; 1085 tBTM_ESCO_CONN_REQ_EVT_DATA conn_evt; 1086 } tBTM_ESCO_EVT_DATA; 1087 1088 /*************************** 1089 ** eSCO Callback Functions 1090 ****************************/ 1091 typedef void (tBTM_ESCO_CBACK) (tBTM_ESCO_EVT event, tBTM_ESCO_EVT_DATA *p_data); 1092 1093 1094 /***************************************************************************** 1095 ** SECURITY MANAGEMENT 1096 *****************************************************************************/ 1097 /******************************* 1098 ** Security Manager Constants 1099 ********************************/ 1100 1101 /* Security Mode (BTM_SetSecurityMode) */ 1102 #define BTM_SEC_MODE_UNDEFINED 0 1103 #define BTM_SEC_MODE_NONE 1 1104 #define BTM_SEC_MODE_SERVICE 2 1105 #define BTM_SEC_MODE_LINK 3 1106 #define BTM_SEC_MODE_SP 4 1107 #define BTM_SEC_MODE_SP_DEBUG 5 1108 1109 /* Security Service Levels [bit mask] (BTM_SetSecurityLevel) 1110 ** Encryption should not be used without authentication 1111 */ 1112 #define BTM_SEC_NONE 0x0000 /* Nothing required */ 1113 #define BTM_SEC_IN_AUTHORIZE 0x0001 /* Inbound call requires authorization */ 1114 #define BTM_SEC_IN_AUTHENTICATE 0x0002 /* Inbound call requires authentication */ 1115 #define BTM_SEC_IN_ENCRYPT 0x0004 /* Inbound call requires encryption */ 1116 #define BTM_SEC_OUT_AUTHORIZE 0x0008 /* Outbound call requires authorization */ 1117 #define BTM_SEC_OUT_AUTHENTICATE 0x0010 /* Outbound call requires authentication */ 1118 #define BTM_SEC_OUT_ENCRYPT 0x0020 /* Outbound call requires encryption */ 1119 #define BTM_SEC_BOND 0x0040 /* Bonding */ 1120 #define BTM_SEC_BOND_CONN 0x0080 /* bond_created_connection */ 1121 #define BTM_SEC_FORCE_MASTER 0x0100 /* Need to switch connection to be master */ 1122 #define BTM_SEC_ATTEMPT_MASTER 0x0200 /* Try to switch connection to be master */ 1123 #define BTM_SEC_FORCE_SLAVE 0x0400 /* Need to switch connection to be master */ 1124 #define BTM_SEC_ATTEMPT_SLAVE 0x0800 /* Try to switch connection to be slave */ 1125 #define BTM_SEC_IN_MITM 0x1000 /* inbound Do man in the middle protection */ 1126 #define BTM_SEC_OUT_MITM 0x2000 /* outbound Do man in the middle protection */ 1127 1128 /* Security Flags [bit mask] (BTM_GetSecurityFlags) 1129 */ 1130 #define BTM_SEC_FLAG_AUTHORIZED 0x01 1131 #define BTM_SEC_FLAG_AUTHENTICATED 0x02 1132 #define BTM_SEC_FLAG_ENCRYPTED 0x04 1133 #define BTM_SEC_FLAG_LKEY_KNOWN 0x10 1134 #define BTM_SEC_FLAG_LKEY_AUTHED 0x20 1135 1136 /* PIN types */ 1137 #define BTM_PIN_TYPE_VARIABLE HCI_PIN_TYPE_VARIABLE 1138 #define BTM_PIN_TYPE_FIXED HCI_PIN_TYPE_FIXED 1139 1140 /* Link Key types used to generate the new link key. 1141 ** returned in link key notification callback function 1142 */ 1143 #define BTM_LKEY_TYPE_COMBINATION HCI_LKEY_TYPE_COMBINATION 1144 #define BTM_LKEY_TYPE_LOCAL_UNIT HCI_LKEY_TYPE_LOCAL_UNIT 1145 #define BTM_LKEY_TYPE_REMOTE_UNIT HCI_LKEY_TYPE_REMOTE_UNIT 1146 #define BTM_LKEY_TYPE_DEBUG_COMB HCI_LKEY_TYPE_DEBUG_COMB 1147 #define BTM_LKEY_TYPE_UNAUTH_COMB HCI_LKEY_TYPE_UNAUTH_COMB 1148 #define BTM_LKEY_TYPE_AUTH_COMB HCI_LKEY_TYPE_AUTH_COMB 1149 #define BTM_LKEY_TYPE_CHANGED_COMB HCI_LKEY_TYPE_CHANGED_COMB 1150 #define BTM_LKEY_TYPE_IGNORE 0xff /* used when event is response from 1151 hci return link keys request */ 1152 1153 /* Protocol level security (BTM_SetSecurityLevel) */ 1154 #define BTM_SEC_PROTO_L2CAP 0 1155 #define BTM_SEC_PROTO_SDP 1 1156 #define BTM_SEC_PROTO_TCS 2 1157 #define BTM_SEC_PROTO_RFCOMM 3 1158 #define BTM_SEC_PROTO_OBEX 4 1159 #define BTM_SEC_PROTO_BNEP 5 1160 #define BTM_SEC_PROTO_HID 6 /* HID */ 1161 #define BTM_SEC_PROTO_AVDT 7 1162 #define BTM_SEC_PROTO_MCA 8 1163 1164 /* Determine the number of UINT32's necessary for security services */ 1165 #define BTM_SEC_ARRAY_BITS 32 /* Number of bits in each array element */ 1166 #define BTM_SEC_SERVICE_ARRAY_SIZE (((UINT32)BTM_SEC_MAX_SERVICES / BTM_SEC_ARRAY_BITS) + \ 1167 (((UINT32)BTM_SEC_MAX_SERVICES % BTM_SEC_ARRAY_BITS) ? 1 : 0)) 1168 1169 /* Security service definitions (BTM_SetSecurityLevel) 1170 ** Used for Authorization APIs 1171 */ 1172 #define BTM_SEC_SERVICE_SDP_SERVER 0 1173 #define BTM_SEC_SERVICE_SERIAL_PORT 1 1174 #define BTM_SEC_SERVICE_LAN_ACCESS 2 1175 #define BTM_SEC_SERVICE_DUN 3 1176 #define BTM_SEC_SERVICE_IRMC_SYNC 4 1177 #define BTM_SEC_SERVICE_IRMC_SYNC_CMD 5 1178 #define BTM_SEC_SERVICE_OBEX 6 1179 #define BTM_SEC_SERVICE_OBEX_FTP 7 1180 #define BTM_SEC_SERVICE_HEADSET 8 1181 #define BTM_SEC_SERVICE_CORDLESS 9 1182 #define BTM_SEC_SERVICE_INTERCOM 10 1183 #define BTM_SEC_SERVICE_FAX 11 1184 #define BTM_SEC_SERVICE_HEADSET_AG 12 1185 #define BTM_SEC_SERVICE_PNP_INFO 13 1186 #define BTM_SEC_SERVICE_GEN_NET 14 1187 #define BTM_SEC_SERVICE_GEN_FILE 15 1188 #define BTM_SEC_SERVICE_GEN_AUDIO 16 1189 #define BTM_SEC_SERVICE_GEN_TEL 17 1190 #define BTM_SEC_SERVICE_CTP_DATA 18 1191 #define BTM_SEC_SERVICE_HCRP_CTRL 19 1192 #define BTM_SEC_SERVICE_HCRP_DATA 20 1193 #define BTM_SEC_SERVICE_HCRP_NOTIF 21 1194 #define BTM_SEC_SERVICE_BPP_JOB 22 1195 #define BTM_SEC_SERVICE_BPP_STATUS 23 1196 #define BTM_SEC_SERVICE_BPP_REF 24 1197 #define BTM_SEC_SERVICE_BNEP_PANU 25 1198 #define BTM_SEC_SERVICE_BNEP_GN 26 1199 #define BTM_SEC_SERVICE_BNEP_NAP 27 1200 #define BTM_SEC_SERVICE_HF_HANDSFREE 28 1201 #define BTM_SEC_SERVICE_AG_HANDSFREE 29 1202 #define BTM_SEC_SERVICE_TE_PHONE_ACCESS 30 1203 #define BTM_SEC_SERVICE_ME_PHONE_ACCESS 31 1204 1205 #define BTM_SEC_SERVICE_HIDH_SEC_CTRL 32 1206 #define BTM_SEC_SERVICE_HIDH_NOSEC_CTRL 33 1207 #define BTM_SEC_SERVICE_HIDH_INTR 34 1208 #define BTM_SEC_SERVICE_BIP 35 1209 #define BTM_SEC_SERVICE_BIP_REF 36 1210 #define BTM_SEC_SERVICE_AVDTP 37 1211 #define BTM_SEC_SERVICE_AVDTP_NOSEC 38 1212 #define BTM_SEC_SERVICE_AVCTP 39 1213 #define BTM_SEC_SERVICE_SAP 40 1214 #define BTM_SEC_SERVICE_PBAP 41 1215 #define BTM_SEC_SERVICE_RFC_MUX 42 1216 #define BTM_SEC_SERVICE_AVCTP_BROWSE 43 1217 #define BTM_SEC_SERVICE_MAP 44 1218 #define BTM_SEC_SERVICE_MAP_NOTIF 45 1219 #define BTM_SEC_SERVICE_MCAP_CTRL 46 1220 #define BTM_SEC_SERVICE_MCAP_DATA 47 1221 #define BTM_SEC_SERVICE_HDP_SNK 48 1222 #define BTM_SEC_SERVICE_HDP_SRC 49 1223 #define BTM_SEC_SERVICE_ATT 50 1224 1225 /* Update these as services are added */ 1226 #define BTM_SEC_SERVICE_FIRST_EMPTY 51 1227 1228 #ifndef BTM_SEC_MAX_SERVICES 1229 #define BTM_SEC_MAX_SERVICES 65 1230 #endif 1231 1232 /************************************************************************************************ 1233 ** Security Services MACROS handle array of UINT32 bits for more than 32 trusted services 1234 *************************************************************************************************/ 1235 /* MACRO to set the security service bit mask in a bit stream */ 1236 #define BTM_SEC_SET_SERVICE(p, service) (((UINT32 *)(p))[(((UINT32)(service)) / BTM_SEC_ARRAY_BITS)] |= \ 1237 ((UINT32)1 << (((UINT32)(service)) % BTM_SEC_ARRAY_BITS))) 1238 1239 1240 /* MACRO to clear the security service bit mask in a bit stream */ 1241 #define BTM_SEC_CLR_SERVICE(p, service) (((UINT32 *)(p))[(((UINT32)(service)) / BTM_SEC_ARRAY_BITS)] &= \ 1242 ~((UINT32)1 << (((UINT32)(service)) % BTM_SEC_ARRAY_BITS))) 1243 1244 /* MACRO to check the security service bit mask in a bit stream (Returns TRUE or FALSE) */ 1245 #define BTM_SEC_IS_SERVICE_TRUSTED(p, service) (((((UINT32 *)(p))[(((UINT32)(service)) / BTM_SEC_ARRAY_BITS)]) & \ 1246 (UINT32)(((UINT32)1 << (((UINT32)(service)) % BTM_SEC_ARRAY_BITS)))) ? TRUE : FALSE) 1247 1248 /* MACRO to copy two trusted device bitmask */ 1249 #define BTM_SEC_COPY_TRUSTED_DEVICE(p_src, p_dst) {UINT32 trst; for (trst = 0; trst < BTM_SEC_SERVICE_ARRAY_SIZE; trst++) \ 1250 ((UINT32 *)(p_dst))[trst] = ((UINT32 *)(p_src))[trst];} 1251 1252 /* MACRO to clear two trusted device bitmask */ 1253 #define BTM_SEC_CLR_TRUSTED_DEVICE(p_dst) {UINT32 trst; for (trst = 0; trst < BTM_SEC_SERVICE_ARRAY_SIZE; trst++) \ 1254 ((UINT32 *)(p_dst))[trst] = 0;} 1255 1256 /* Following bits can be provided by host in the trusted_mask array */ 1257 /* 0..31 bits of mask[0] (Least Significant Word) */ 1258 #define BTM_SEC_TRUST_SDP_SERVER (1 << BTM_SEC_SERVICE_SDP_SERVER) 1259 #define BTM_SEC_TRUST_SERIAL_PORT (1 << BTM_SEC_SERVICE_SERIAL_PORT) 1260 #define BTM_SEC_TRUST_LAN_ACCESS (1 << BTM_SEC_SERVICE_LAN_ACCESS) 1261 #define BTM_SEC_TRUST_DUN (1 << BTM_SEC_SERVICE_DUN) 1262 #define BTM_SEC_TRUST_IRMC_SYNC (1 << BTM_SEC_SERVICE_IRMC_SYNC) 1263 #define BTM_SEC_TRUST_IRMC_SYNC_CMD (1 << BTM_SEC_SERVICE_IRMC_SYNC_CMD) 1264 #define BTM_SEC_TRUST_OBEX (1 << BTM_SEC_SERVICE_OBEX) 1265 #define BTM_SEC_TRUST_OBEX_FTP (1 << BTM_SEC_SERVICE_OBEX_FTP) 1266 #define BTM_SEC_TRUST_HEADSET (1 << BTM_SEC_SERVICE_HEADSET) 1267 #define BTM_SEC_TRUST_CORDLESS (1 << BTM_SEC_SERVICE_CORDLESS) 1268 #define BTM_SEC_TRUST_INTERCOM (1 << BTM_SEC_SERVICE_INTERCOM) 1269 #define BTM_SEC_TRUST_FAX (1 << BTM_SEC_SERVICE_FAX) 1270 #define BTM_SEC_TRUST_HEADSET_AG (1 << BTM_SEC_SERVICE_HEADSET_AG) 1271 #define BTM_SEC_TRUST_PNP_INFO (1 << BTM_SEC_SERVICE_PNP_INFO) 1272 #define BTM_SEC_TRUST_GEN_NET (1 << BTM_SEC_SERVICE_GEN_NET) 1273 #define BTM_SEC_TRUST_GEN_FILE (1 << BTM_SEC_SERVICE_GEN_FILE) 1274 #define BTM_SEC_TRUST_GEN_AUDIO (1 << BTM_SEC_SERVICE_GEN_AUDIO) 1275 #define BTM_SEC_TRUST_GEN_TEL (1 << BTM_SEC_SERVICE_GEN_TEL) 1276 #define BTM_SEC_TRUST_CTP_DATA (1 << BTM_SEC_SERVICE_CTP_DATA) 1277 #define BTM_SEC_TRUST_HCRP_CTRL (1 << BTM_SEC_SERVICE_HCRP_CTRL) 1278 #define BTM_SEC_TRUST_HCRP_DATA (1 << BTM_SEC_SERVICE_HCRP_DATA) 1279 #define BTM_SEC_TRUST_HCRP_NOTIF (1 << BTM_SEC_SERVICE_HCRP_NOTIF) 1280 #define BTM_SEC_TRUST_BPP_JOB (1 << BTM_SEC_SERVICE_JOB) 1281 #define BTM_SEC_TRUST_BPP_STATUS (1 << BTM_SEC_SERVICE_STATUS) 1282 #define BTM_SEC_TRUST_BPP_REF (1 << BTM_SEC_SERVICE_REF) 1283 #define BTM_SEC_TRUST_BNEP_PANU (1 << BTM_SEC_SERVICE_BNEP_PANU) 1284 #define BTM_SEC_TRUST_BNEP_GN (1 << BTM_SEC_SERVICE_BNEP_GN) 1285 #define BTM_SEC_TRUST_BNEP_NAP (1 << BTM_SEC_SERVICE_BNEP_NAP) 1286 #define BTM_SEC_TRUST_HFP_HF (1 << BTM_SEC_SERVICE_HF_HANDSFREE) 1287 #define BTM_SEC_TRUST_HFP_AG (1 << BTM_SEC_SERVICE_AG_HANDSFREE) 1288 #define BTM_SEC_TRUST_TE_PHONE_ACCESS (1 << BTM_SEC_SERVICE_TE_PHONE_ACCESS) 1289 #define BTM_SEC_TRUST_ME_PHONE_ACCESS (1 << BTM_SEC_SERVICE_ME_PHONE_ACCESS) 1290 1291 /* 0..31 bits of mask[1] (Most Significant Word) */ 1292 #define BTM_SEC_TRUST_HIDH_CTRL (1 << (BTM_SEC_SERVICE_HIDH_SEC_CTRL - 32)) 1293 #define BTM_SEC_TRUST_HIDH_NOSEC_CTRL (1 << (BTM_SEC_SERVICE_HIDH_NOSEC_CTRL - 32)) 1294 #define BTM_SEC_TRUST_HIDH_INTR (1 << (BTM_SEC_SERVICE_HIDH_INTR - 32)) 1295 #define BTM_SEC_TRUST_BIP (1 << (BTM_SEC_SERVICE_BIP - 32)) 1296 #define BTM_SEC_TRUST_BIP_REF (1 << (BTM_SEC_SERVICE_BIP_REF - 32)) 1297 #define BTM_SEC_TRUST_AVDTP (1 << (BTM_SEC_SERVICE_AVDTP - 32)) 1298 #define BTM_SEC_TRUST_AVDTP_NOSEC (1 << (BTM_SEC_SERVICE_AVDTP_NOSEC - 32)) 1299 #define BTM_SEC_TRUST_AVCTP (1 << (BTM_SEC_SERVICE_AVCTP - 32)) 1300 #define BTM_SEC_TRUST_SAP (1 << (BTM_SEC_SERVICE_SAP - 32)) 1301 #define BTM_SEC_TRUST_PBAP (1 << (BTM_SEC_SERVICE_PBAP - 32)) 1302 #define BTM_SEC_TRUST_RFC_MUX (1 << (BTM_SEC_SERVICE_RFC_MUX - 32)) 1303 #define BTM_SEC_TRUST_AVCTP_BROWSE (1 << (BTM_SEC_SERVICE_AVCTP_BROWSE - 32)) 1304 #define BTM_SEC_TRUST_MAP (1 << (BTM_SEC_SERVICE_MAP - 32)) 1305 #define BTM_SEC_TRUST_MAP_NOTIF (1 << (BTM_SEC_SERVICE_MAP_NOTIF - 32)) 1306 #define BTM_SEC_TRUST_MCAP_CTRL (1 << (BTM_SEC_SERVICE_MCAP_CTRL - 32)) 1307 #define BTM_SEC_TRUST_MCAP_DATA (1 << (BTM_SEC_SERVICE_MCAP_DATA - 32)) 1308 #define BTM_SEC_TRUST_HDP_SNK (1 << (BTM_SEC_SERVICE_HDP_SNK - 32)) 1309 #define BTM_SEC_TRUST_HDP_SRC (1 << (BTM_SEC_SERVICE_HDP_SRC - 32)) 1310 1311 #define BTM_SEC_TRUST_ALL 0xFFFFFFFF /* for each array element */ 1312 1313 /**************************************** 1314 ** Security Manager Callback Functions 1315 *****************************************/ 1316 /* Authorize device for service. Parameters are 1317 ** BD Address of remote 1318 ** Device Class of remote 1319 ** BD Name of remote 1320 ** Service name 1321 ** Service Id (NULL - unknown service or unused 1322 ** [BTM_SEC_SERVICE_NAME_LEN set to 0]) 1323 ** Is originator of the connection 1324 ** Result of the operation 1325 */ 1326 typedef UINT8 (tBTM_AUTHORIZE_CALLBACK) (BD_ADDR bd_addr, DEV_CLASS dev_class, 1327 tBTM_BD_NAME bd_name, UINT8 *service_name, 1328 UINT8 service_id, BOOLEAN is_originator); 1329 1330 /* Get PIN for the connection. Parameters are 1331 ** BD Address of remote 1332 ** Device Class of remote 1333 ** BD Name of remote 1334 */ 1335 typedef UINT8 (tBTM_PIN_CALLBACK) (BD_ADDR bd_addr, DEV_CLASS dev_class, 1336 tBTM_BD_NAME bd_name); 1337 1338 1339 /* Get Link Key for the connection. Parameters are 1340 ** BD Address of remote 1341 ** Link Key 1342 */ 1343 typedef UINT8 (tBTM_LINK_KEY_REQ_CALLBACK) (BD_ADDR bd_addr, LINK_KEY key); 1344 1345 /* New Link Key for the connection. Parameters are 1346 ** BD Address of remote 1347 ** Link Key 1348 ** Key Type: Combination, Local Unit, or Remote Unit 1349 */ 1350 typedef UINT8 (tBTM_LINK_KEY_CALLBACK) (BD_ADDR bd_addr, DEV_CLASS dev_class, 1351 tBTM_BD_NAME bd_name, UINT8 *key, 1352 UINT8 key_type); 1353 1354 1355 /* Remote Name Resolved. Parameters are 1356 ** BD Address of remote 1357 ** BD Name of remote 1358 */ 1359 typedef void (tBTM_RMT_NAME_CALLBACK) (BD_ADDR bd_addr, DEV_CLASS dc, 1360 tBTM_BD_NAME bd_name); 1361 1362 1363 /* Authentication complete for the connection. Parameters are 1364 ** BD Address of remote 1365 ** Device Class of remote 1366 ** BD Name of remote 1367 ** 1368 */ 1369 typedef UINT8 (tBTM_AUTH_COMPLETE_CALLBACK) (BD_ADDR bd_addr, DEV_CLASS dev_class, 1370 tBTM_BD_NAME bd_name, int result); 1371 1372 /* Operation abort. Called by the stack when link goes down during. Pin code 1373 ** request or authorization. Parameters are 1374 ** BD Address of remote 1375 ** 1376 */ 1377 typedef UINT8 (tBTM_ABORT_CALLBACK) (BD_ADDR bd_addr, DEV_CLASS dev_class, 1378 tBTM_BD_NAME bd_name); 1379 1380 enum 1381 { 1382 BTM_SP_IO_REQ_EVT, /* received IO_CAPABILITY_REQUEST event */ 1383 BTM_SP_IO_RSP_EVT, /* received IO_CAPABILITY_RESPONSE event */ 1384 BTM_SP_CFM_REQ_EVT, /* received USER_CONFIRMATION_REQUEST event */ 1385 BTM_SP_KEY_NOTIF_EVT, /* received USER_PASSKEY_NOTIFY event */ 1386 BTM_SP_KEY_REQ_EVT, /* received USER_PASSKEY_REQUEST event */ 1387 BTM_SP_KEYPRESS_EVT, /* received KEYPRESS_NOTIFY event */ 1388 BTM_SP_LOC_OOB_EVT, /* received result for READ_LOCAL_OOB_DATA command */ 1389 BTM_SP_RMT_OOB_EVT, /* received REMOTE_OOB_DATA_REQUEST event */ 1390 BTM_SP_COMPLT_EVT, /* received SIMPLE_PAIRING_COMPLETE event */ 1391 BTM_SP_UPGRADE_EVT /* check if the application wants to upgrade the link key */ 1392 }; 1393 typedef UINT8 tBTM_SP_EVT; 1394 1395 #define BTM_IO_CAP_OUT 0 /* DisplayOnly */ 1396 #define BTM_IO_CAP_IO 1 /* DisplayYesNo */ 1397 #define BTM_IO_CAP_IN 2 /* KeyboardOnly */ 1398 #define BTM_IO_CAP_NONE 3 /* NoInputNoOutput */ 1399 #if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE 1400 #define BTM_IO_CAP_KBDISP 4 /* Keyboard display */ 1401 #define BTM_IO_CAP_MAX 5 1402 #else 1403 #define BTM_IO_CAP_MAX 4 1404 #endif 1405 1406 typedef UINT8 tBTM_IO_CAP; 1407 1408 #define BTM_MAX_PASSKEY_VAL (999999) 1409 #define BTM_MIN_PASSKEY_VAL (0) 1410 1411 #define BTM_AUTH_SP_NO 0 /* MITM Protection Not Required - Single Profile/non-bonding 1412 Numeric comparison with automatic accept allowed */ 1413 #define BTM_AUTH_SP_YES 1 /* MITM Protection Required - Single Profile/non-bonding 1414 Use IO Capabilities to determine authentication procedure */ 1415 #define BTM_AUTH_AP_NO 2 /* MITM Protection Not Required - All Profiles/dedicated bonding 1416 Numeric comparison with automatic accept allowed */ 1417 #define BTM_AUTH_AP_YES 3 /* MITM Protection Required - All Profiles/dedicated bonding 1418 Use IO Capabilities to determine authentication procedure */ 1419 #define BTM_AUTH_SPGB_NO 4 /* MITM Protection Not Required - Single Profiles/general bonding 1420 Numeric comparison with automatic accept allowed */ 1421 #define BTM_AUTH_SPGB_YES 5 /* MITM Protection Required - Single Profiles/general bonding 1422 Use IO Capabilities to determine authentication procedure */ 1423 #define BTM_AUTH_DD_BOND 2 /* this bit is ORed to the BTM_AUTH_SP_* when IO exchange for dedicated bonding */ 1424 #define BTM_AUTH_GB_BIT 4 /* the genernal bonding bit */ 1425 #define BTM_AUTH_BONDS 6 /* the general/dedicated bonding bits */ 1426 #define BTM_AUTH_YN_BIT 1 /* this is the Yes or No bit */ 1427 1428 typedef UINT8 tBTM_AUTH_REQ; 1429 1430 enum 1431 { 1432 BTM_OOB_NONE, 1433 BTM_OOB_PRESENT 1434 #if BTM_OOB_INCLUDED == TRUE 1435 ,BTM_OOB_UNKNOWN 1436 #endif 1437 }; 1438 typedef UINT8 tBTM_OOB_DATA; 1439 1440 /* data type for BTM_SP_IO_REQ_EVT */ 1441 typedef struct 1442 { 1443 BD_ADDR bd_addr; /* peer address */ 1444 tBTM_IO_CAP io_cap; /* local IO capabilities */ 1445 tBTM_OOB_DATA oob_data; /* OOB data present (locally) for the peer device */ 1446 tBTM_AUTH_REQ auth_req; /* Authentication required (for local device) */ 1447 BOOLEAN is_orig; /* TRUE, if local device initiated the SP process */ 1448 } tBTM_SP_IO_REQ; 1449 1450 /* data type for BTM_SP_IO_RSP_EVT */ 1451 typedef struct 1452 { 1453 BD_ADDR bd_addr; /* peer address */ 1454 tBTM_IO_CAP io_cap; /* peer IO capabilities */ 1455 tBTM_OOB_DATA oob_data; /* OOB data present at peer device for the local device */ 1456 tBTM_AUTH_REQ auth_req; /* Authentication required for peer device */ 1457 } tBTM_SP_IO_RSP; 1458 1459 /* data type for BTM_SP_CFM_REQ_EVT */ 1460 typedef struct 1461 { 1462 BD_ADDR bd_addr; /* peer address */ 1463 DEV_CLASS dev_class; /* peer CoD */ 1464 tBTM_BD_NAME bd_name; /* peer device name */ 1465 UINT32 num_val; /* the numeric value for comparison. If just_works, do not show this number to UI */ 1466 BOOLEAN just_works; /* TRUE, if "Just Works" association model */ 1467 tBTM_AUTH_REQ loc_auth_req; /* Authentication required for local device */ 1468 tBTM_AUTH_REQ rmt_auth_req; /* Authentication required for peer device */ 1469 tBTM_IO_CAP loc_io_caps; /* IO Capabilities of the local device */ 1470 tBTM_IO_CAP rmt_io_caps; /* IO Capabilities of the remot device */ 1471 } tBTM_SP_CFM_REQ; 1472 1473 /* data type for BTM_SP_KEY_REQ_EVT */ 1474 typedef struct 1475 { 1476 BD_ADDR bd_addr; /* peer address */ 1477 DEV_CLASS dev_class; /* peer CoD */ 1478 tBTM_BD_NAME bd_name; /* peer device name */ 1479 } tBTM_SP_KEY_REQ; 1480 1481 /* data type for BTM_SP_KEY_NOTIF_EVT */ 1482 typedef struct 1483 { 1484 BD_ADDR bd_addr; /* peer address */ 1485 DEV_CLASS dev_class; /* peer CoD */ 1486 tBTM_BD_NAME bd_name; /* peer device name */ 1487 UINT32 passkey; /* passkey */ 1488 } tBTM_SP_KEY_NOTIF; 1489 1490 enum 1491 { 1492 BTM_SP_KEY_STARTED, /* passkey entry started */ 1493 BTM_SP_KEY_ENTERED, /* passkey digit entered */ 1494 BTM_SP_KEY_ERASED, /* passkey digit erased */ 1495 BTM_SP_KEY_CLEARED, /* passkey cleared */ 1496 BTM_SP_KEY_COMPLT /* passkey entry completed */ 1497 }; 1498 typedef UINT8 tBTM_SP_KEY_TYPE; 1499 1500 /* data type for BTM_SP_KEYPRESS_EVT */ 1501 typedef struct 1502 { 1503 BD_ADDR bd_addr; /* peer address */ 1504 tBTM_SP_KEY_TYPE notif_type; 1505 } tBTM_SP_KEYPRESS; 1506 1507 /* data type for BTM_SP_LOC_OOB_EVT */ 1508 typedef struct 1509 { 1510 tBTM_STATUS status; /* */ 1511 BT_OCTET16 c; /* Simple Pairing Hash C */ 1512 BT_OCTET16 r; /* Simple Pairing Randomnizer R */ 1513 } tBTM_SP_LOC_OOB; 1514 1515 /* data type for BTM_SP_RMT_OOB_EVT */ 1516 typedef struct 1517 { 1518 BD_ADDR bd_addr; /* peer address */ 1519 DEV_CLASS dev_class; /* peer CoD */ 1520 tBTM_BD_NAME bd_name; /* peer device name */ 1521 } tBTM_SP_RMT_OOB; 1522 1523 1524 /* data type for BTM_SP_COMPLT_EVT */ 1525 typedef struct 1526 { 1527 BD_ADDR bd_addr; /* peer address */ 1528 DEV_CLASS dev_class; /* peer CoD */ 1529 tBTM_BD_NAME bd_name; /* peer device name */ 1530 tBTM_STATUS status; /* status of the simple pairing process */ 1531 } tBTM_SP_COMPLT; 1532 1533 /* data type for BTM_SP_UPGRADE_EVT */ 1534 typedef struct 1535 { 1536 BD_ADDR bd_addr; /* peer address */ 1537 BOOLEAN upgrade; /* TRUE, to upgrade the link key */ 1538 } tBTM_SP_UPGRADE; 1539 1540 typedef union 1541 { 1542 tBTM_SP_IO_REQ io_req; /* BTM_SP_IO_REQ_EVT */ 1543 tBTM_SP_IO_RSP io_rsp; /* BTM_SP_IO_RSP_EVT */ 1544 tBTM_SP_CFM_REQ cfm_req; /* BTM_SP_CFM_REQ_EVT */ 1545 tBTM_SP_KEY_NOTIF key_notif; /* BTM_SP_KEY_NOTIF_EVT */ 1546 tBTM_SP_KEY_REQ key_req; /* BTM_SP_KEY_REQ_EVT */ 1547 tBTM_SP_KEYPRESS key_press; /* BTM_SP_KEYPRESS_EVT */ 1548 tBTM_SP_LOC_OOB loc_oob; /* BTM_SP_LOC_OOB_EVT */ 1549 tBTM_SP_RMT_OOB rmt_oob; /* BTM_SP_RMT_OOB_EVT */ 1550 tBTM_SP_COMPLT complt; /* BTM_SP_COMPLT_EVT */ 1551 tBTM_SP_UPGRADE upgrade; /* BTM_SP_UPGRADE_EVT */ 1552 } tBTM_SP_EVT_DATA; 1553 1554 /* Simple Pairing Events. Called by the stack when Simple Pairing related 1555 ** events occur. 1556 */ 1557 typedef UINT8 (tBTM_SP_CALLBACK) (tBTM_SP_EVT event, tBTM_SP_EVT_DATA *p_data); 1558 1559 1560 typedef void (tBTM_MKEY_CALLBACK) (BD_ADDR bd_addr, UINT8 status, UINT8 key_flag) ; 1561 1562 /* Encryption enabled/disabled complete: Optionally passed with BTM_SetEncryption. 1563 ** Parameters are 1564 ** BD Address of remote 1565 ** optional data passed in by BTM_SetEncryption 1566 ** tBTM_STATUS - result of the operation 1567 */ 1568 typedef void (tBTM_SEC_CBACK) (BD_ADDR bd_addr, void *p_ref_data, tBTM_STATUS result); 1569 1570 /* Bond Cancel complete. Parameters are 1571 ** Result of the cancel operation 1572 ** 1573 */ 1574 typedef void (tBTM_BOND_CANCEL_CMPL_CALLBACK) (tBTM_STATUS result); 1575 1576 /* LE related event and data structure 1577 */ 1578 enum 1579 { 1580 BTM_LE_IO_REQ_EVT = 1, /* received IO_CAPABILITY_REQUEST event */ 1581 BTM_LE_SEC_REQUEST_EVT, /* security request event */ 1582 BTM_LE_KEY_NOTIF_EVT, /* received USER_PASSKEY_NOTIFY event */ 1583 BTM_LE_KEY_REQ_EVT, /* received USER_PASSKEY_REQUEST event */ 1584 BTM_LE_OOB_REQ_EVT, /* OOB data request event */ 1585 BTM_LE_COMPLT_EVT, /* received SIMPLE_PAIRING_COMPLETE event */ 1586 BTM_LE_KEY_EVT /* KEY update event */ 1587 }; 1588 typedef UINT8 tBTM_LE_EVT; 1589 1590 #define BTM_LE_KEY_PENC SMP_SEC_KEY_TYPE_ENC /* encryption information of peer device */ 1591 #define BTM_LE_KEY_PID SMP_SEC_KEY_TYPE_ID /* identity key of the peer device */ 1592 #define BTM_LE_KEY_PCSRK SMP_SEC_KEY_TYPE_CSRK /* peer SRK */ 1593 #define BTM_LE_KEY_LENC (SMP_SEC_KEY_TYPE_ENC << 3) /* master role security information:div */ 1594 #define BTM_LE_KEY_LID (SMP_SEC_KEY_TYPE_ID << 3) /* master device ID key */ 1595 #define BTM_LE_KEY_LCSRK (SMP_SEC_KEY_TYPE_CSRK << 3) /* local CSRK has been deliver to peer */ 1596 typedef UINT8 tBTM_LE_KEY_TYPE; 1597 1598 #define BTM_LE_AUTH_REQ_NO_BOND SMP_AUTH_NO_BOND /* 0 */ 1599 #define BTM_LE_AUTH_REQ_BOND SMP_AUTH_GEN_BOND /* 1 << 0 */ 1600 #define BTM_LE_AUTH_REQ_MITM SMP_AUTH_YN_BIT /* 1 << 2 */ 1601 typedef UINT8 tBTM_LE_AUTH_REQ; 1602 1603 #define BTM_LE_AUTH_REQ_MASK SMP_AUTH_MASK /* 0x03*/ 1604 1605 /* LE security level */ 1606 #define BTM_LE_SEC_NONE SMP_SEC_NONE 1607 #define BTM_LE_SEC_UNAUTHENTICATE SMP_SEC_UNAUTHENTICATE /* 1 */ 1608 #define BTM_LE_SEC_AUTHENTICATED SMP_SEC_AUTHENTICATED /* 4 */ 1609 typedef UINT8 tBTM_LE_SEC; 1610 1611 1612 typedef struct 1613 { 1614 tBTM_IO_CAP io_cap; /* local IO capabilities */ 1615 UINT8 oob_data; /* OOB data present (locally) for the peer device */ 1616 tBTM_LE_AUTH_REQ auth_req; /* Authentication request (for local device) contain bonding and MITM info */ 1617 UINT8 max_key_size; /* max encryption key size */ 1618 tBTM_LE_KEY_TYPE init_keys; /* keys to be distributed, bit mask */ 1619 tBTM_LE_KEY_TYPE resp_keys; /* keys to be distributed, bit mask */ 1620 } tBTM_LE_IO_REQ; 1621 1622 #if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE 1623 /* data type for tBTM_LE_COMPLT */ 1624 typedef struct 1625 { 1626 UINT8 reason; 1627 UINT8 sec_level; 1628 BOOLEAN privacy_supported; 1629 BOOLEAN is_pair_cancel; 1630 }tBTM_LE_COMPLT; 1631 #endif 1632 1633 /* BLE encryption keys */ 1634 typedef struct 1635 { 1636 BT_OCTET16 ltk; 1637 BT_OCTET8 rand; 1638 UINT16 ediv; 1639 UINT8 sec_level; 1640 UINT8 key_size; 1641 }tBTM_LE_PENC_KEYS; 1642 1643 /* BLE CSRK keys */ 1644 typedef struct 1645 { 1646 UINT32 counter; 1647 BT_OCTET16 csrk; 1648 UINT8 sec_level; 1649 }tBTM_LE_PCSRK_KEYS; 1650 1651 /* BLE Encryption reproduction keys */ 1652 typedef struct 1653 { 1654 UINT16 div; 1655 UINT8 key_size; 1656 UINT8 sec_level; 1657 }tBTM_LE_LENC_KEYS; 1658 1659 /* BLE SRK keys */ 1660 typedef struct 1661 { 1662 UINT32 counter; 1663 UINT16 div; 1664 UINT8 sec_level; 1665 1666 }tBTM_LE_LCSRK_KEYS; 1667 1668 typedef struct 1669 { 1670 BT_OCTET16 irk; 1671 tBLE_ADDR_TYPE addr_type; 1672 BD_ADDR static_addr; 1673 }tBTM_LE_PID_KEYS; 1674 1675 typedef union 1676 { 1677 tBTM_LE_PENC_KEYS penc_key; /* received peer encryption key */ 1678 tBTM_LE_PCSRK_KEYS pcsrk_key; /* received peer device SRK */ 1679 tBTM_LE_PID_KEYS pid_key; /* peer device ID key */ 1680 tBTM_LE_LENC_KEYS lenc_key; /* local encryption reproduction keys LTK = = d1(ER,DIV,0)*/ 1681 tBTM_LE_LCSRK_KEYS lcsrk_key; /* local device CSRK = d1(ER,DIV,1)*/ 1682 }tBTM_LE_KEY_VALUE; 1683 1684 typedef struct 1685 { 1686 tBTM_LE_KEY_TYPE key_type; 1687 tBTM_LE_KEY_VALUE *p_key_value; 1688 }tBTM_LE_KEY; 1689 1690 typedef union 1691 { 1692 tBTM_LE_IO_REQ io_req; /* BTM_LE_IO_REQ_EVT */ 1693 UINT32 key_notif; /* BTM_LE_KEY_NOTIF_EVT */ 1694 /* no callback dta for BTM_LE_KEY_REQ_EVT & BTM_LE_OOB_REQ_EVT */ 1695 #if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE 1696 tBTM_LE_COMPLT complt; /* BTM_LE_COMPLT_EVT */ 1697 #endif 1698 tBTM_LE_KEY key; 1699 } tBTM_LE_EVT_DATA; 1700 1701 /* Simple Pairing Events. Called by the stack when Simple Pairing related 1702 ** events occur. 1703 */ 1704 typedef UINT8 (tBTM_LE_CALLBACK) (tBTM_LE_EVT event, BD_ADDR bda, tBTM_LE_EVT_DATA *p_data); 1705 1706 #define BTM_BLE_KEY_TYPE_ID 1 1707 #define BTM_BLE_KEY_TYPE_ER 2 1708 #define BTM_BLE_KEY_TYPE_COUNTER 3 //tobe obsolete 1709 1710 typedef struct 1711 { 1712 BT_OCTET16 ir; 1713 BT_OCTET16 irk; 1714 BT_OCTET16 dhk; 1715 1716 }tBTM_BLE_LOCAL_ID_KEYS; 1717 1718 typedef union 1719 { 1720 tBTM_BLE_LOCAL_ID_KEYS id_keys; 1721 BT_OCTET16 er; 1722 }tBTM_BLE_LOCAL_KEYS; 1723 1724 1725 /* New LE identity key for local device. 1726 */ 1727 typedef void (tBTM_LE_KEY_CALLBACK) (UINT8 key_type, tBTM_BLE_LOCAL_KEYS *p_key); 1728 1729 1730 /*************************** 1731 ** Security Manager Types 1732 ****************************/ 1733 /* Structure that applications use to register with BTM_SecRegister */ 1734 typedef struct 1735 { 1736 tBTM_AUTHORIZE_CALLBACK *p_authorize_callback; 1737 tBTM_PIN_CALLBACK *p_pin_callback; 1738 tBTM_LINK_KEY_CALLBACK *p_link_key_callback; 1739 tBTM_LINK_KEY_REQ_CALLBACK *p_link_key_req_callback; 1740 tBTM_AUTH_COMPLETE_CALLBACK *p_auth_complete_callback; 1741 tBTM_ABORT_CALLBACK *p_abort_callback; 1742 tBTM_BOND_CANCEL_CMPL_CALLBACK *p_bond_cancel_cmpl_callback; 1743 tBTM_SP_CALLBACK *p_sp_callback; 1744 #if BLE_INCLUDED == TRUE 1745 #if SMP_INCLUDED == TRUE 1746 tBTM_LE_CALLBACK *p_le_callback; 1747 #endif 1748 tBTM_LE_KEY_CALLBACK *p_le_key_callback; 1749 #endif 1750 } tBTM_APPL_INFO; 1751 1752 /* Callback function for when a link supervision timeout event occurs. 1753 ** This asynchronous event is enabled/disabled by calling BTM_RegForLstoEvt(). 1754 */ 1755 typedef void (tBTM_LSTO_CBACK) (BD_ADDR remote_bda, UINT16 timeout); 1756 1757 /***************************************************************************** 1758 ** POWER MANAGEMENT 1759 *****************************************************************************/ 1760 /**************************** 1761 ** Power Manager Constants 1762 *****************************/ 1763 /* BTM Power manager status codes */ 1764 enum 1765 { 1766 BTM_PM_STS_ACTIVE = HCI_MODE_ACTIVE, 1767 BTM_PM_STS_HOLD = HCI_MODE_HOLD, 1768 BTM_PM_STS_SNIFF = HCI_MODE_SNIFF, 1769 BTM_PM_STS_PARK = HCI_MODE_PARK, 1770 BTM_PM_STS_SSR, /* report the SSR parameters in HCI_SNIFF_SUB_RATE_EVT */ 1771 BTM_PM_STS_PENDING, /* when waiting for status from controller */ 1772 BTM_PM_STS_ERROR /* when HCI command status returns error */ 1773 }; 1774 typedef UINT8 tBTM_PM_STATUS; 1775 1776 /* BTM Power manager modes */ 1777 enum 1778 { 1779 BTM_PM_MD_ACTIVE = BTM_PM_STS_ACTIVE, 1780 BTM_PM_MD_HOLD = BTM_PM_STS_HOLD, 1781 BTM_PM_MD_SNIFF = BTM_PM_STS_SNIFF, 1782 BTM_PM_MD_PARK = BTM_PM_STS_PARK, 1783 BTM_PM_MD_FORCE = 0x10 /* OR this to force ACL link to a certain mode */ 1784 }; 1785 typedef UINT8 tBTM_PM_MODE; 1786 1787 #define BTM_PM_SET_ONLY_ID 0x80 1788 1789 /* Operation codes */ 1790 #define BTM_PM_REG_SET 1 /* The module wants to set the desired power mode */ 1791 #define BTM_PM_REG_NOTIF 2 /* The module wants to receive mode change event */ 1792 #define BTM_PM_DEREG 4 /* The module does not want to involve with PM anymore */ 1793 1794 /************************ 1795 ** Power Manager Types 1796 *************************/ 1797 typedef struct 1798 { 1799 UINT16 max; 1800 UINT16 min; 1801 UINT16 attempt; 1802 UINT16 timeout; 1803 tBTM_PM_MODE mode; 1804 } tBTM_PM_PWR_MD; 1805 1806 /************************************* 1807 ** Power Manager Callback Functions 1808 **************************************/ 1809 typedef void (tBTM_PM_STATUS_CBACK) (BD_ADDR p_bda, tBTM_PM_STATUS status, 1810 UINT16 value, UINT8 hci_status); 1811 1812 1813 /************************ 1814 ** Stored Linkkey Types 1815 *************************/ 1816 #define BTM_CB_EVT_RETURN_LINK_KEYS 1 1817 #define BTM_CB_EVT_READ_STORED_LINK_KEYS 2 1818 #define BTM_CB_EVT_WRITE_STORED_LINK_KEYS 3 1819 #define BTM_CB_EVT_DELETE_STORED_LINK_KEYS 4 1820 1821 typedef struct 1822 { 1823 UINT8 event; 1824 1825 } tBTM_STORED_LINK_KEYS_EVT; 1826 1827 1828 typedef struct 1829 { 1830 UINT8 event; 1831 UINT8 num_keys; 1832 1833 } tBTM_RETURN_LINK_KEYS_EVT; 1834 1835 1836 typedef struct 1837 { 1838 BD_ADDR bd_addr; 1839 LINK_KEY link_key; 1840 1841 } tBTM_BD_ADDR_LINK_KEY_PAIR; 1842 1843 1844 typedef struct 1845 { 1846 UINT8 event; 1847 UINT8 status; 1848 UINT16 max_keys; 1849 UINT16 read_keys; 1850 1851 } tBTM_READ_STORED_LINK_KEY_COMPLETE; 1852 1853 1854 typedef struct 1855 { 1856 UINT8 event; 1857 UINT8 status; 1858 UINT8 num_keys; 1859 1860 } tBTM_WRITE_STORED_LINK_KEY_COMPLETE; 1861 1862 1863 typedef struct 1864 { 1865 UINT8 event; 1866 UINT8 status; 1867 UINT16 num_keys; 1868 1869 } tBTM_DELETE_STORED_LINK_KEY_COMPLETE; 1870 1871 1872 /* These macros are defined to check the Broadcom features supported in controller 1873 * (the return value for BTM_ReadBrcmFeatures() */ 1874 /* multi-av */ 1875 #define BTM_FEATURE_MULTI_AV_MASK 0x01 1876 #define BTM_FEATURE_MULTI_AV_OFF 0 1877 #define BTM_VSC_MULTI_AV_SUPPORTED(x) ((x)[BTM_FEATURE_MULTI_AV_OFF] & BTM_FEATURE_MULTI_AV_MASK) 1878 1879 /* WBS SBC codec */ 1880 #define BTM_FEATURE_WBS_SBC_MASK 0x02 1881 #define BTM_FEATURE_WBS_SBC_OFF 0 1882 #define BTM_VSC_WBS_SBC_SUPPORTED(x) ((x)[BTM_FEATURE_WBS_SBC_OFF] & BTM_FEATURE_WBS_SBC_MASK) 1883 1884 /* Advanced Audio LC-PLC */ 1885 #define BTM_FEATURE_AUDIO_LC_PLC_MASK 0x04 1886 #define BTM_FEATURE_AUDIO_LC_PLC_OFF 0 1887 #define BTM_VSC_AUDIO_LC_PLC_SUPPORTED(x) ((x)[BTM_FEATURE_AUDIO_LC_PLC_OFF] & BTM_FEATURE_AUDIO_LC_PLC_MASK) 1888 1889 /* Light stack for audio routing in Controller */ 1890 #define BTM_FEATURE_LIGHT_STACK_MASK 0x08 1891 #define BTM_FEATURE_LIGHT_STACK_OFF 0 1892 #define BTM_VSC_LIGHT_STACK_SUPPORTED(x) ((x)[BTM_FEATURE_LIGHT_STACK_OFF] & BTM_FEATURE_LIGHT_STACK_MASK) 1893 1894 /* NFC support */ 1895 #define BTM_FEATURE_NFC_MASK (HCI_BRCM_FEATURE_NFC_MASK) /* 0x10 */ 1896 #define BTM_FEATURE_NFC_OFF (HCI_BRCM_FEATURE_NFC_OFF) /* 0 */ 1897 #define BTM_VSC_NFC_SUPPORTED(x) ((x)[BTM_FEATURE_NFC_OFF] & BTM_FEATURE_NFC_MASK) 1898 1899 1900 /************************ 1901 ** Dual-Stack support 1902 *************************/ 1903 /* BTM_SYNC_FAIL_EVT reason codes */ 1904 #define BTM_SYNC_SUCCESS 0 1905 #define BTM_SYNC_FAIL_BTE_SWITCH_REJECTED 1 1906 #define BTM_SYNC_FAIL_TRANS_PAUSE 2 1907 #define BTM_SYNC_FAIL_CORE_SYNC 3 1908 #define BTM_SYNC_FAIL_BTA_SYNC 4 1909 #define BTM_SYNC_FAIL_TRANS_RESUME 5 1910 #define BTM_SYNC_FAIL_RESYNC 6 1911 #define BTM_SYNC_FAIL_ERROR 7 1912 #define BTM_SYNC_FAIL_UIPC_OPEN 8 1913 typedef UINT8 tBTM_SYNC_STATUS; 1914 1915 /* Direction of sync (used by BTM_SyncStack) */ 1916 #define BTM_SW_BB_TO_MM 0 1917 #define BTM_SW_TO_BB 1 /* Switch back to baseband stack (from either MM or BTC host) */ 1918 #define BTM_SW_RESYNC 2 1919 #define BTM_SW_BB_TO_BTC 3 /* Switch from baseband stack to Bluetooth Controller Host stack */ 1920 #define BTM_SW_MM_TO_BB 4 1921 #define BTM_SW_BTC_TO_BB 5 1922 typedef UINT8 tBTM_SW_DIR; 1923 1924 /* Stack synchronization events (returned by tBTM_SYNC_STACK_CBACK callback) */ 1925 #define BTM_SYNC_CPLT_EVT 0 1926 #define BTM_SYNC_BTA_EVT 1 1927 #define BTM_RESYNC_CPLT_EVT 2 1928 #define BTM_UIPC_OPENED_EVT 3 1929 #define BTM_UIPC_CLOSED_EVT 4 1930 typedef UINT8 tBTM_SYNC_STACK_EVT; 1931 1932 /* Synchronization info from BTA/application that will be sent when calling BTE sync request functions */ 1933 typedef struct 1934 { 1935 tBTM_SW_DIR dir; 1936 UINT16 lcid[BTM_SYNC_INFO_NUM_STR]; 1937 UINT8 avdt_handle[BTM_SYNC_INFO_NUM_STR]; 1938 } tBTM_SYNC_INFO; 1939 1940 /* Stack synchonization callback function 1941 ** Parameters are 1942 ** event: stack synchronization event 1943 ** status: BTM_SUCCESS if event was successful 1944 */ 1945 typedef void (*tBTM_SYNC_STACK_CBACK)(tBTM_SYNC_STACK_EVT event, tBTM_SYNC_STATUS status); 1946 1947 1948 /* Sync complete callback function. Called by bte layers after synchronization is complete 1949 ** so that BTM_SYNC can procede with the next step for switching stack to MM 1950 ** 1951 ** Parameters are 1952 ** status: BTM_SUCCESS if synchronization was successful 1953 */ 1954 typedef void (*tBTM_SYNC_CPLT_CBACK)(tBTM_STATUS status); 1955 1956 1957 1958 /* IPC event callback function. Called by BTM when an IPC event is received. 1959 ** These events are currently sent to DM through the callback function. 1960 ** 1961 ** Parameters are 1962 ** status: BTM_SUCCESS if synchronization was successful 1963 ** p_data: Actual message in the IPC 1964 */ 1965 typedef void (tBTM_IPC_EVT_CBACK)(tBTM_STATUS status, BT_HDR *p_data); 1966 1967 /* MIP evnets, callbacks */ 1968 enum 1969 { 1970 BTM_MIP_MODE_CHG_EVT, 1971 BTM_MIP_DISCONNECT_EVT, 1972 BTM_MIP_PKTS_COMPL_EVT, 1973 BTM_MIP_RXDATA_EVT 1974 }; 1975 typedef UINT8 tBTM_MIP_EVT; 1976 1977 typedef struct 1978 { 1979 tBTM_MIP_EVT event; 1980 BD_ADDR bd_addr; 1981 UINT16 mip_id; 1982 } tBTM_MIP_MODE_CHANGE; 1983 1984 typedef struct 1985 { 1986 tBTM_MIP_EVT event; 1987 UINT16 mip_id; 1988 UINT8 disc_reason; 1989 } tBTM_MIP_CONN_TIMEOUT; 1990 1991 #define BTM_MIP_MAX_RX_LEN 17 1992 1993 typedef struct 1994 { 1995 tBTM_MIP_EVT event; 1996 UINT16 mip_id; 1997 UINT8 rx_len; 1998 UINT8 rx_data[BTM_MIP_MAX_RX_LEN]; 1999 } tBTM_MIP_RXDATA; 2000 2001 typedef struct 2002 { 2003 tBTM_MIP_EVT event; 2004 BD_ADDR bd_addr; 2005 UINT8 data[11]; /* data[0] shows Vender-specific device type */ 2006 } tBTM_MIP_EIR_HANDSHAKE; 2007 2008 typedef struct 2009 { 2010 tBTM_MIP_EVT event; 2011 UINT16 num_sent; /* Number of packets completed at the controller */ 2012 } tBTM_MIP_PKTS_COMPL; 2013 2014 typedef union 2015 { 2016 tBTM_MIP_EVT event; 2017 tBTM_MIP_MODE_CHANGE mod_chg; 2018 tBTM_MIP_CONN_TIMEOUT conn_tmo; 2019 tBTM_MIP_EIR_HANDSHAKE eir; 2020 tBTM_MIP_PKTS_COMPL completed; 2021 tBTM_MIP_RXDATA rxdata; 2022 } tBTM_MIP_EVENT_DATA; 2023 2024 /* MIP event callback function */ 2025 typedef void (tBTM_MIP_EVENTS_CB) (tBTM_MIP_EVT event, tBTM_MIP_EVENT_DATA data); 2026 2027 /* MIP Device query callback function */ 2028 typedef BOOLEAN (tBTM_MIP_QUERY_CB) (BD_ADDR dev_addr, UINT8 *p_mode, LINK_KEY link_key); 2029 2030 /***************************************************************************** 2031 ** EXTERNAL FUNCTION DECLARATIONS 2032 *****************************************************************************/ 2033 #ifdef __cplusplus 2034 extern "C" { 2035 #endif 2036 2037 /***************************************************************************** 2038 ** DEVICE CONTROL and COMMON FUNCTIONS 2039 *****************************************************************************/ 2040 2041 /******************************************************************************* 2042 ** 2043 ** Function BTM_SetAfhChannels 2044 ** 2045 ** Description This function is called to disable channels 2046 ** 2047 ** Returns status 2048 ** 2049 *******************************************************************************/ 2050 BTM_API extern tBTM_STATUS BTM_SetAfhChannels (UINT8 first, UINT8 last); 2051 2052 /******************************************************************************* 2053 ** 2054 ** Function BTM_SetAfhChannelAssessment 2055 ** 2056 ** Description This function is called to set the channel assessment mode on or off 2057 ** 2058 ** Returns status 2059 ** 2060 *******************************************************************************/ 2061 BTM_API extern tBTM_STATUS BTM_SetAfhChannelAssessment (BOOLEAN enable_or_disable); 2062 2063 /******************************************************************************* 2064 ** 2065 ** Function BTM_DeviceReset 2066 ** 2067 ** Description This function is called to reset the controller.The Callback function 2068 ** if provided is called when startup of the device has 2069 ** completed. 2070 ** 2071 ** Returns void 2072 ** 2073 *******************************************************************************/ 2074 BTM_API extern void BTM_DeviceReset (tBTM_CMPL_CB *p_cb); 2075 2076 2077 /******************************************************************************* 2078 ** 2079 ** Function BTM_IsDeviceUp 2080 ** 2081 ** Description This function is called to check if the device is up. 2082 ** 2083 ** Returns TRUE if device is up, else FALSE 2084 ** 2085 *******************************************************************************/ 2086 BTM_API extern BOOLEAN BTM_IsDeviceUp (void); 2087 2088 2089 /******************************************************************************* 2090 ** 2091 ** Function BTM_SetLocalDeviceName 2092 ** 2093 ** Description This function is called to set the local device name. 2094 ** 2095 ** Returns BTM_CMD_STARTED if successful, otherwise an error 2096 ** 2097 *******************************************************************************/ 2098 BTM_API extern tBTM_STATUS BTM_SetLocalDeviceName (char *p_name); 2099 2100 /******************************************************************************* 2101 ** 2102 ** Function BTM_SetDeviceClass 2103 ** 2104 ** Description This function is called to set the local device class 2105 ** 2106 ** Returns BTM_SUCCESS if successful, otherwise an error 2107 ** 2108 *******************************************************************************/ 2109 BTM_API extern tBTM_STATUS BTM_SetDeviceClass (DEV_CLASS dev_class); 2110 2111 2112 /******************************************************************************* 2113 ** 2114 ** Function BTM_ReadLocalDeviceName 2115 ** 2116 ** Description This function is called to read the local device name. 2117 ** 2118 ** Returns status of the operation 2119 ** If success, BTM_SUCCESS is returned and p_name points stored 2120 ** local device name 2121 ** If BTM doesn't store local device name, BTM_NO_RESOURCES is 2122 ** is returned and p_name is set to NULL 2123 ** 2124 *******************************************************************************/ 2125 BTM_API extern tBTM_STATUS BTM_ReadLocalDeviceName (char **p_name); 2126 2127 /******************************************************************************* 2128 ** 2129 ** Function BTM_ReadLocalDeviceNameFromController 2130 ** 2131 ** Description Get local device name from controller. Do not use cached 2132 ** name (used to get chip-id prior to btm reset complete). 2133 ** 2134 ** Returns BTM_CMD_STARTED if successful, otherwise an error 2135 ** 2136 *******************************************************************************/ 2137 BTM_API extern tBTM_STATUS BTM_ReadLocalDeviceNameFromController (tBTM_CMPL_CB *p_rln_cmpl_cback); 2138 2139 /******************************************************************************* 2140 ** 2141 ** Function BTM_ReadLocalVersion 2142 ** 2143 ** Description This function is called to read the local device version 2144 ** 2145 ** Returns BTM_SUCCESS if successful, otherwise an error 2146 ** 2147 *******************************************************************************/ 2148 BTM_API extern tBTM_STATUS BTM_ReadLocalVersion (tBTM_VERSION_INFO *p_vers); 2149 2150 2151 /******************************************************************************* 2152 ** 2153 ** Function BTM_ReadLocalDeviceAddr 2154 ** 2155 ** Description This function is called to read the local device address 2156 ** 2157 ** Returns BTM_SUCCESS 2158 ** Callback returns the local device address 2159 ** 2160 *******************************************************************************/ 2161 BTM_API extern tBTM_STATUS BTM_ReadLocalDeviceAddr (tBTM_CMPL_CB *p_cb); 2162 2163 2164 /******************************************************************************* 2165 ** 2166 ** Function BTM_GetLocalDeviceAddr 2167 ** 2168 ** Description This function is called to read the local device address 2169 ** 2170 ** Returns void 2171 ** the local device address is copied into bd_addr 2172 ** 2173 *******************************************************************************/ 2174 BTM_API extern void BTM_GetLocalDeviceAddr (BD_ADDR bd_addr); 2175 2176 2177 /******************************************************************************* 2178 ** 2179 ** Function BTM_ReadDeviceClass 2180 ** 2181 ** Description This function is called to read the local device class 2182 ** 2183 ** Returns pointer to the device class 2184 ** 2185 *******************************************************************************/ 2186 BTM_API extern UINT8 *BTM_ReadDeviceClass (void); 2187 2188 2189 /******************************************************************************* 2190 ** 2191 ** Function BTM_ReadLocalFeatures 2192 ** 2193 ** Description This function is called to read the local features 2194 ** 2195 ** Returns pointer to the local features string 2196 ** 2197 *******************************************************************************/ 2198 BTM_API extern UINT8 *BTM_ReadLocalFeatures (void); 2199 2200 /******************************************************************************* 2201 ** 2202 ** Function BTM_ReadLocalExtendedFeatures 2203 ** 2204 ** Description This function is called to read the local extended features 2205 ** 2206 ** Returns pointer to the local extended features mask or NULL if bad 2207 ** page 2208 ** 2209 *******************************************************************************/ 2210 BTM_API extern UINT8 *BTM_ReadLocalExtendedFeatures (UINT8 page_number); 2211 2212 /******************************************************************************* 2213 ** 2214 ** Function BTM_ReadBrcmFeatures 2215 ** 2216 ** Description This function is called to read the Broadcom specific features 2217 ** 2218 ** Returns pointer to the Broadcom features string 2219 ** 2220 *******************************************************************************/ 2221 BTM_API extern UINT8 *BTM_ReadBrcmFeatures (void); 2222 2223 /******************************************************************************* 2224 ** 2225 ** Function BTM_RegisterForDeviceStatusNotif 2226 ** 2227 ** Description This function is called to register for device status 2228 ** change notifications. 2229 ** 2230 ** Returns pointer to previous caller's callback function or NULL if first 2231 ** registration. 2232 ** 2233 *******************************************************************************/ 2234 BTM_API extern tBTM_DEV_STATUS_CB *BTM_RegisterForDeviceStatusNotif (tBTM_DEV_STATUS_CB *p_cb); 2235 2236 2237 /******************************************************************************* 2238 ** 2239 ** Function BTM_RegisterForVSEvents 2240 ** 2241 ** Description This function is called to register/deregister for vendor 2242 ** specific HCI events. 2243 ** 2244 ** If is_register=TRUE, then the function will be registered; 2245 ** if is_register=FALSE, then the function will be deregistered. 2246 ** 2247 ** Returns BTM_SUCCESS if successful, 2248 ** BTM_BUSY if maximum number of callbacks have already been 2249 ** registered. 2250 ** 2251 *******************************************************************************/ 2252 BTM_API extern tBTM_STATUS BTM_RegisterForVSEvents (tBTM_VS_EVT_CB *p_cb, BOOLEAN is_register); 2253 2254 2255 /******************************************************************************* 2256 ** 2257 ** Function BTM_ContinueReset 2258 ** 2259 ** Description Instructs stack to continue its stack initialization after 2260 ** an application has completed any vender specific commands 2261 ** sent to the controller. 2262 ** 2263 ** Note: This function is only called if an application 2264 ** initialization function has been inserted in the reset 2265 ** sequence. (BTM_APP_DEV_INIT is defined with a function). 2266 ** 2267 ** Returns void 2268 ** 2269 *******************************************************************************/ 2270 BTM_API extern void BTM_ContinueReset (void); 2271 2272 2273 /******************************************************************************* 2274 ** 2275 ** Function BTM_VendorSpecificCommand 2276 ** 2277 ** Description Send a vendor specific HCI command to the controller. 2278 ** 2279 ** Returns 2280 ** BTM_SUCCESS Command sent. Does not expect command complete 2281 ** event. (command cmpl callback param is NULL) 2282 ** BTM_CMD_STARTED Command sent. Waiting for command cmpl event. 2283 ** BTM_BUSY Command not sent. Waiting for cmd cmpl event for 2284 ** prior command. 2285 ** 2286 *******************************************************************************/ 2287 BTM_API extern tBTM_STATUS BTM_VendorSpecificCommand(UINT16 opcode, 2288 UINT8 param_len, 2289 UINT8 *p_param_buf, 2290 tBTM_VSC_CMPL_CB *p_cb); 2291 2292 2293 /******************************************************************************* 2294 ** 2295 ** Function BTM_AllocateSCN 2296 ** 2297 ** Description Look through the Server Channel Numbers for a free one to be 2298 ** used with an RFCOMM connection. 2299 ** 2300 ** Returns Allocated SCN number or 0 if none. 2301 ** 2302 *******************************************************************************/ 2303 BTM_API extern UINT8 BTM_AllocateSCN(void); 2304 2305 // btla-specific ++ 2306 /******************************************************************************* 2307 ** 2308 ** Function BTM_TryAllocateSCN 2309 ** 2310 ** Description Try to allocate a fixed server channel 2311 ** 2312 ** Returns Returns TRUE if server channel was available 2313 ** 2314 *******************************************************************************/ 2315 BTM_API extern BOOLEAN BTM_TryAllocateSCN(UINT8 scn); 2316 // btla-specific -- 2317 2318 2319 /******************************************************************************* 2320 ** 2321 ** Function BTM_FreeSCN 2322 ** 2323 ** Description Free the specified SCN. 2324 ** 2325 ** Returns TRUE if successful, FALSE if SCN is not in use or invalid 2326 ** 2327 *******************************************************************************/ 2328 BTM_API extern BOOLEAN BTM_FreeSCN(UINT8 scn); 2329 2330 2331 /******************************************************************************* 2332 ** 2333 ** Function BTM_SetTraceLevel 2334 ** 2335 ** Description This function sets the trace level for BTM. If called with 2336 ** a value of 0xFF, it simply returns the current trace level. 2337 ** 2338 ** Returns The new or current trace level 2339 ** 2340 *******************************************************************************/ 2341 BTM_API extern UINT8 BTM_SetTraceLevel (UINT8 new_level); 2342 2343 2344 /******************************************************************************* 2345 ** 2346 ** Function BTM_WritePageTimeout 2347 ** 2348 ** Description Send HCI Wite Page Timeout. 2349 ** 2350 ** Returns 2351 ** BTM_SUCCESS Command sent. 2352 ** BTM_NO_RESOURCES If out of resources to send the command. 2353 ** 2354 *******************************************************************************/ 2355 BTM_API extern tBTM_STATUS BTM_WritePageTimeout(UINT16 timeout); 2356 2357 /******************************************************************************* 2358 ** 2359 ** Function BTM_WriteVoiceSettings 2360 ** 2361 ** Description Send HCI Write Voice Settings command. 2362 ** See hcidefs.h for settings bitmask values. 2363 ** 2364 ** Returns 2365 ** BTM_SUCCESS Command sent. 2366 ** BTM_NO_RESOURCES If out of resources to send the command. 2367 ** 2368 ** 2369 *******************************************************************************/ 2370 BTM_API extern tBTM_STATUS BTM_WriteVoiceSettings(UINT16 settings); 2371 2372 /******************************************************************************* 2373 ** 2374 ** Function BTM_EnableTestMode 2375 ** 2376 ** Description Send HCI the enable device under test command. 2377 ** 2378 ** Note: Controller can only be taken out of this mode by 2379 ** resetting the controller. 2380 ** 2381 ** Returns 2382 ** BTM_SUCCESS Command sent. 2383 ** BTM_NO_RESOURCES If out of resources to send the command. 2384 ** 2385 ** 2386 *******************************************************************************/ 2387 BTM_API extern tBTM_STATUS BTM_EnableTestMode(void); 2388 2389 2390 /***************************************************************************** 2391 ** DEVICE DISCOVERY FUNCTIONS - Inquiry, Remote Name, Discovery, Class of Device 2392 *****************************************************************************/ 2393 2394 /******************************************************************************* 2395 ** 2396 ** Function BTM_SetDiscoverability 2397 ** 2398 ** Description This function is called to set the device into or out of 2399 ** discoverable mode. Discoverable mode means inquiry 2400 ** scans are enabled. If a value of '0' is entered for window or 2401 ** interval, the default values are used. 2402 ** 2403 ** Returns BTM_SUCCESS if successful 2404 ** BTM_BUSY if a setting of the filter is already in progress 2405 ** BTM_NO_RESOURCES if couldn't get a memory pool buffer 2406 ** BTM_ILLEGAL_VALUE if a bad parameter was detected 2407 ** BTM_WRONG_MODE if the device is not up. 2408 ** 2409 *******************************************************************************/ 2410 BTM_API extern tBTM_STATUS BTM_SetDiscoverability (UINT16 inq_mode, UINT16 window, 2411 UINT16 interval); 2412 2413 2414 /******************************************************************************* 2415 ** 2416 ** Function BTM_ReadDiscoverability 2417 ** 2418 ** Description This function is called to read the current discoverability 2419 ** mode of the device. 2420 ** 2421 ** Output Params: p_window - current inquiry scan duration 2422 ** p_interval - current inquiry scan interval 2423 ** 2424 ** Returns BTM_NON_DISCOVERABLE, BTM_LIMITED_DISCOVERABLE, or 2425 ** BTM_GENERAL_DISCOVERABLE 2426 ** 2427 *******************************************************************************/ 2428 BTM_API extern UINT16 BTM_ReadDiscoverability (UINT16 *p_window, 2429 UINT16 *p_interval); 2430 2431 2432 /******************************************************************************* 2433 ** 2434 ** Function BTM_SetPeriodicInquiryMode 2435 ** 2436 ** Description This function is called to set the device periodic inquiry mode. 2437 ** If the duration is zero, the periodic inquiry mode is cancelled. 2438 ** 2439 ** Parameters: p_inqparms - pointer to the inquiry information 2440 ** mode - GENERAL or LIMITED inquiry 2441 ** duration - length in 1.28 sec intervals (If '0', the inquiry is CANCELLED) 2442 ** max_resps - maximum amount of devices to search for before ending the inquiry 2443 ** filter_cond_type - BTM_CLR_INQUIRY_FILTER, BTM_FILTER_COND_DEVICE_CLASS, or 2444 ** BTM_FILTER_COND_BD_ADDR 2445 ** filter_cond - value for the filter (based on filter_cond_type) 2446 ** 2447 ** max_delay - maximum amount of time between successive inquiries 2448 ** min_delay - minimum amount of time between successive inquiries 2449 ** p_results_cb - callback returning pointer to results (tBTM_INQ_RESULTS) 2450 ** 2451 ** Returns BTM_CMD_STARTED if successfully started 2452 ** BTM_ILLEGAL_VALUE if a bad parameter is detected 2453 ** BTM_NO_RESOURCES if could not allocate a message buffer 2454 ** BTM_SUCCESS - if cancelling the periodic inquiry 2455 ** BTM_BUSY - if an inquiry is already active 2456 ** BTM_WRONG_MODE if the device is not up. 2457 ** 2458 *******************************************************************************/ 2459 BTM_API extern tBTM_STATUS BTM_SetPeriodicInquiryMode (tBTM_INQ_PARMS *p_inqparms, 2460 UINT16 max_delay, UINT16 min_delay, 2461 tBTM_INQ_RESULTS_CB *p_results_cb); 2462 2463 2464 /******************************************************************************* 2465 ** 2466 ** Function BTM_StartInquiry 2467 ** 2468 ** Description This function is called to start an inquiry. 2469 ** 2470 ** Parameters: p_inqparms - pointer to the inquiry information 2471 ** mode - GENERAL or LIMITED inquiry 2472 ** duration - length in 1.28 sec intervals (If '0', the inquiry is CANCELLED) 2473 ** max_resps - maximum amount of devices to search for before ending the inquiry 2474 ** filter_cond_type - BTM_CLR_INQUIRY_FILTER, BTM_FILTER_COND_DEVICE_CLASS, or 2475 ** BTM_FILTER_COND_BD_ADDR 2476 ** filter_cond - value for the filter (based on filter_cond_type) 2477 ** 2478 ** p_results_cb - Pointer to the callback routine which gets called 2479 ** upon receipt of an inquiry result. If this field is 2480 ** NULL, the application is not notified. 2481 ** 2482 ** p_cmpl_cb - Pointer to the callback routine which gets called 2483 ** upon completion. If this field is NULL, the 2484 ** application is not notified when completed. 2485 ** Returns tBTM_STATUS 2486 ** BTM_CMD_STARTED if successfully initiated 2487 ** BTM_BUSY if already in progress 2488 ** BTM_ILLEGAL_VALUE if parameter(s) are out of range 2489 ** BTM_NO_RESOURCES if could not allocate resources to start the command 2490 ** BTM_WRONG_MODE if the device is not up. 2491 ** 2492 *******************************************************************************/ 2493 BTM_API extern tBTM_STATUS BTM_StartInquiry (tBTM_INQ_PARMS *p_inqparms, 2494 tBTM_INQ_RESULTS_CB *p_results_cb, 2495 tBTM_CMPL_CB *p_cmpl_cb); 2496 2497 2498 /******************************************************************************* 2499 ** 2500 ** Function BTM_IsInquiryActive 2501 ** 2502 ** Description This function returns a bit mask of the current inquiry state 2503 ** 2504 ** Returns BTM_INQUIRY_INACTIVE if inactive (0) 2505 ** BTM_LIMITED_INQUIRY_ACTIVE if a limted inquiry is active 2506 ** BTM_GENERAL_INQUIRY_ACTIVE if a general inquiry is active 2507 ** BTM_PERIODIC_INQUIRY_ACTIVE if a periodic inquiry is active 2508 ** 2509 *******************************************************************************/ 2510 BTM_API extern UINT16 BTM_IsInquiryActive (void); 2511 2512 2513 /******************************************************************************* 2514 ** 2515 ** Function BTM_CancelInquiry 2516 ** 2517 ** Description This function cancels an inquiry if active 2518 ** 2519 ** Returns BTM_SUCCESS if successful 2520 ** BTM_NO_RESOURCES if could not allocate a message buffer 2521 ** BTM_WRONG_MODE if the device is not up. 2522 ** 2523 *******************************************************************************/ 2524 BTM_API extern tBTM_STATUS BTM_CancelInquiry(void); 2525 2526 2527 /******************************************************************************* 2528 ** 2529 ** Function BTM_CancelPeriodicInquiry 2530 ** 2531 ** Description This function cancels a periodic inquiry 2532 ** 2533 ** Returns 2534 ** BTM_NO_RESOURCES if could not allocate a message buffer 2535 ** BTM_SUCCESS - if cancelling the periodic inquiry 2536 ** BTM_WRONG_MODE if the device is not up. 2537 ** 2538 *******************************************************************************/ 2539 BTM_API extern tBTM_STATUS BTM_CancelPeriodicInquiry(void); 2540 2541 2542 /******************************************************************************* 2543 ** 2544 ** Function BTM_SetInquiryFilterCallback 2545 ** 2546 ** Description Host can register to be asked whenever an inquiry result 2547 ** is received. If host does not like the device no name 2548 ** request is issued for the device 2549 ** 2550 ** Returns void 2551 ** 2552 *******************************************************************************/ 2553 BTM_API extern void BTM_SetInquiryFilterCallback(tBTM_FILTER_CB *p_callback); 2554 2555 2556 /******************************************************************************* 2557 ** 2558 ** Function BTM_SetConnectability 2559 ** 2560 ** Description This function is called to set the device into or out of 2561 ** connectable mode. Discoverable mode means page scans enabled. 2562 ** 2563 ** Returns BTM_SUCCESS if successful 2564 ** BTM_ILLEGAL_VALUE if a bad parameter is detected 2565 ** BTM_NO_RESOURCES if could not allocate a message buffer 2566 ** BTM_WRONG_MODE if the device is not up. 2567 ** 2568 *******************************************************************************/ 2569 BTM_API extern tBTM_STATUS BTM_SetConnectability (UINT16 page_mode, UINT16 window, 2570 UINT16 interval); 2571 2572 2573 /******************************************************************************* 2574 ** 2575 ** Function BTM_ReadConnectability 2576 ** 2577 ** Description This function is called to read the current discoverability 2578 ** mode of the device. 2579 ** Output Params p_window - current page scan duration 2580 ** p_interval - current time between page scans 2581 ** 2582 ** Returns BTM_NON_CONNECTABLE or BTM_CONNECTABLE 2583 ** 2584 *******************************************************************************/ 2585 BTM_API extern UINT16 BTM_ReadConnectability (UINT16 *p_window, UINT16 *p_interval); 2586 2587 2588 /******************************************************************************* 2589 ** 2590 ** Function BTM_SetInquiryMode 2591 ** 2592 ** Description This function is called to set standard, with RSSI 2593 ** mode or extended of the inquiry for local device. 2594 ** 2595 ** Input Params: BTM_INQ_RESULT_STANDARD, BTM_INQ_RESULT_WITH_RSSI or 2596 ** BTM_INQ_RESULT_EXTENDED 2597 ** 2598 ** Returns BTM_SUCCESS if successful 2599 ** BTM_NO_RESOURCES if couldn't get a memory pool buffer 2600 ** BTM_ILLEGAL_VALUE if a bad parameter was detected 2601 ** BTM_WRONG_MODE if the device is not up. 2602 ** 2603 *******************************************************************************/ 2604 BT_API extern tBTM_STATUS BTM_SetInquiryMode (UINT8 mode); 2605 2606 /******************************************************************************* 2607 ** 2608 ** Function BTM_SetInquiryScanType 2609 ** 2610 ** Description This function is called to set the iquiry scan-type to 2611 ** standard or interlaced. 2612 ** 2613 ** Input Params: BTM_SCAN_TYPE_STANDARD or BTM_SCAN_TYPE_INTERLACED 2614 ** 2615 ** Returns BTM_SUCCESS if successful 2616 ** BTM_MODE_UNSUPPORTED if not a 1.2 device 2617 ** BTM_WRONG_MODE if the device is not up. 2618 ** 2619 *******************************************************************************/ 2620 BT_API extern tBTM_STATUS BTM_SetInquiryScanType (UINT16 scan_type); 2621 2622 /******************************************************************************* 2623 ** 2624 ** Function BTM_SetPageScanType 2625 ** 2626 ** Description This function is called to set the page scan-type to 2627 ** standard or interlaced. 2628 ** 2629 ** Input Params: BTM_SCAN_TYPE_STANDARD or BTM_SCAN_TYPE_INTERLACED 2630 ** 2631 ** Returns BTM_SUCCESS if successful 2632 ** BTM_MODE_UNSUPPORTED if not a 1.2 device 2633 ** BTM_WRONG_MODE if the device is not up. 2634 ** 2635 *******************************************************************************/ 2636 2637 BT_API extern tBTM_STATUS BTM_SetPageScanType (UINT16 scan_type); 2638 2639 /******************************************************************************* 2640 ** 2641 ** Function BTM_ReadRemoteDeviceName 2642 ** 2643 ** Description This function initiates a remote device HCI command to the 2644 ** controller and calls the callback when the process has completed. 2645 ** 2646 ** Input Params: remote_bda - device address of name to retrieve 2647 ** p_cb - callback function called when BTM_CMD_STARTED 2648 ** is returned. 2649 ** A pointer to tBTM_REMOTE_DEV_NAME is passed to the 2650 ** callback. 2651 ** 2652 ** Returns 2653 ** BTM_CMD_STARTED is returned if the request was successfully sent 2654 ** to HCI. 2655 ** BTM_BUSY if already in progress 2656 ** BTM_UNKNOWN_ADDR if device address is bad 2657 ** BTM_NO_RESOURCES if could not allocate resources to start the command 2658 ** BTM_WRONG_MODE if the device is not up. 2659 ** 2660 *******************************************************************************/ 2661 BTM_API extern tBTM_STATUS BTM_ReadRemoteDeviceName (BD_ADDR remote_bda, 2662 tBTM_CMPL_CB *p_cb); 2663 2664 2665 /******************************************************************************* 2666 ** 2667 ** Function BTM_CancelRemoteDeviceName 2668 ** 2669 ** Description This function initiates the cancel request for the specified 2670 ** remote device. 2671 ** 2672 ** Input Params: None 2673 ** 2674 ** Returns 2675 ** BTM_CMD_STARTED is returned if the request was successfully sent 2676 ** to HCI. 2677 ** BTM_NO_RESOURCES if could not allocate resources to start the command 2678 ** BTM_WRONG_MODE if there is not an active remote name request. 2679 ** 2680 *******************************************************************************/ 2681 BTM_API extern tBTM_STATUS BTM_CancelRemoteDeviceName (void); 2682 2683 /******************************************************************************* 2684 ** 2685 ** Function BTM_ReadRemoteVersion 2686 ** 2687 ** Description This function is called to read a remote device's version 2688 ** 2689 ** Returns BTM_SUCCESS if successful, otherwise an error 2690 ** 2691 *******************************************************************************/ 2692 BTM_API extern tBTM_STATUS BTM_ReadRemoteVersion (BD_ADDR addr, 2693 UINT8 *lmp_version, 2694 UINT16 *manufacturer, 2695 UINT16 *lmp_sub_version); 2696 2697 /******************************************************************************* 2698 ** 2699 ** Function BTM_ReadRemoteFeatures 2700 ** 2701 ** Description This function is called to read a remote device's 2702 ** supported features mask (features mask located at page 0) 2703 ** 2704 ** Note: The size of device features mask page is 2705 ** BTM_FEATURE_BYTES_PER_PAGE bytes. 2706 ** 2707 ** Returns pointer to the remote supported features mask 2708 ** 2709 *******************************************************************************/ 2710 BTM_API extern UINT8 *BTM_ReadRemoteFeatures (BD_ADDR addr); 2711 2712 /******************************************************************************* 2713 ** 2714 ** Function BTM_ReadRemoteExtendedFeatures 2715 ** 2716 ** Description This function is called to read a specific extended features 2717 ** page of the remote device 2718 ** 2719 ** Note1: The size of device features mask page is 2720 ** BTM_FEATURE_BYTES_PER_PAGE bytes. 2721 ** Note2: The valid device features mask page number depends on 2722 ** the remote device capabilities. It is expected to be in the 2723 ** range [0 - BTM_EXT_FEATURES_PAGE_MAX]. 2724 2725 ** Returns pointer to the remote extended features mask 2726 ** or NULL if page_number is not valid 2727 ** 2728 *******************************************************************************/ 2729 BTM_API extern UINT8 *BTM_ReadRemoteExtendedFeatures (BD_ADDR addr, UINT8 page_number); 2730 2731 /******************************************************************************* 2732 ** 2733 ** Function BTM_ReadNumberRemoteFeaturesPages 2734 ** 2735 ** Description This function is called to retrieve the number of feature pages 2736 ** read from the remote device 2737 ** 2738 ** Returns number of features pages read from the remote device 2739 ** 2740 *******************************************************************************/ 2741 BTM_API extern UINT8 BTM_ReadNumberRemoteFeaturesPages (BD_ADDR addr); 2742 2743 /******************************************************************************* 2744 ** 2745 ** Function BTM_ReadAllRemoteFeatures 2746 ** 2747 ** Description This function is called to read all features of the remote device 2748 ** 2749 ** Returns pointer to the byte[0] of the page[0] of the remote device 2750 ** feature mask. 2751 ** 2752 ** Note: the function returns the pointer to the array of the size 2753 ** BTM_FEATURE_BYTES_PER_PAGE * (BTM_EXT_FEATURES_PAGE_MAX + 1). 2754 ** 2755 *******************************************************************************/ 2756 BTM_API extern UINT8 *BTM_ReadAllRemoteFeatures (BD_ADDR addr); 2757 2758 /******************************************************************************* 2759 ** 2760 ** Function BTM_InqFirstResult 2761 ** 2762 ** Description This function looks through the inquiry database for the first 2763 ** used entrysince the LAST inquiry. This is used in conjunction 2764 ** with BTM_InqNext by applications as a way to walk through the 2765 ** inquiry results database. 2766 ** 2767 ** Returns pointer to first in-use entry, or NULL if DB is empty 2768 ** 2769 *******************************************************************************/ 2770 BTM_API extern tBTM_INQ_INFO *BTM_InqFirstResult (void); 2771 2772 2773 /******************************************************************************* 2774 ** 2775 ** Function BTM_InqNextResult 2776 ** 2777 ** Description This function looks through the inquiry database for the next 2778 ** used entrysince the LAST inquiry. If the input parameter is NULL, 2779 ** the first entry is returned. 2780 ** 2781 ** Returns pointer to next in-use entry, or NULL if no more found. 2782 ** 2783 *******************************************************************************/ 2784 BTM_API extern tBTM_INQ_INFO *BTM_InqNextResult (tBTM_INQ_INFO *p_cur); 2785 2786 2787 /******************************************************************************* 2788 ** 2789 ** Function BTM_InqDbRead 2790 ** 2791 ** Description This function looks through the inquiry database for a match 2792 ** based on Bluetooth Device Address. This is the application's 2793 ** interface to get the inquiry details of a specific BD address. 2794 ** 2795 ** Returns pointer to entry, or NULL if not found 2796 ** 2797 *******************************************************************************/ 2798 BTM_API extern tBTM_INQ_INFO *BTM_InqDbRead (BD_ADDR p_bda); 2799 2800 2801 /******************************************************************************* 2802 ** 2803 ** Function BTM_InqDbFirst 2804 ** 2805 ** Description This function looks through the inquiry database for the first 2806 ** used entry, and returns that. This is used in conjunction with 2807 ** BTM_InqDbNext by applications as a way to walk through the 2808 ** inquiry database. 2809 ** 2810 ** Returns pointer to first in-use entry, or NULL if DB is empty 2811 ** 2812 *******************************************************************************/ 2813 BTM_API extern tBTM_INQ_INFO *BTM_InqDbFirst (void); 2814 2815 2816 /******************************************************************************* 2817 ** 2818 ** Function BTM_InqDbNext 2819 ** 2820 ** Description This function looks through the inquiry database for the next 2821 ** used entry, and returns that. If the input parameter is NULL, 2822 ** the first entry is returned. 2823 ** 2824 ** Returns pointer to next in-use entry, or NULL if no more found. 2825 ** 2826 *******************************************************************************/ 2827 BTM_API extern tBTM_INQ_INFO *BTM_InqDbNext (tBTM_INQ_INFO *p_cur); 2828 2829 2830 /******************************************************************************* 2831 ** 2832 ** Function BTM_ClearInqDb 2833 ** 2834 ** Description This function is called to clear out a device or all devices 2835 ** from the inquiry database. 2836 ** 2837 ** Parameter p_bda - (input) BD_ADDR -> Address of device to clear 2838 ** (NULL clears all entries) 2839 ** 2840 ** Returns BTM_BUSY if an inquiry, get remote name, or event filter 2841 ** is active, otherwise BTM_SUCCESS 2842 ** 2843 *******************************************************************************/ 2844 BTM_API extern tBTM_STATUS BTM_ClearInqDb (BD_ADDR p_bda); 2845 2846 2847 /******************************************************************************* 2848 ** 2849 ** Function BTM_ReadNumInqDbEntries 2850 ** 2851 ** Returns This function returns the number of entries in the inquiry database. 2852 ** 2853 *******************************************************************************/ 2854 BTM_API extern UINT8 BTM_ReadNumInqDbEntries (void); 2855 2856 2857 /******************************************************************************* 2858 ** 2859 ** Function BTM_InquiryRegisterForChanges 2860 ** 2861 ** Description This function is called to register a callback for when the 2862 ** inquiry database changes, i.e. new entry or entry deleted. 2863 ** 2864 ** Returns BTM_SUCCESS if successful, otherwise error code 2865 ** 2866 *******************************************************************************/ 2867 BTM_API extern tBTM_STATUS BTM_InquiryRegisterForChanges (tBTM_INQ_DB_CHANGE_CB *p_cb); 2868 2869 /******************************************************************************* 2870 ** 2871 ** Function BTM_ReadInquiryRspTxPower 2872 ** 2873 ** Description This command will read the inquiry Transmit Power level used 2874 ** to transmit the FHS and EIR data packets. 2875 ** This can be used directly in the Tx Power Level EIR data type. 2876 ** 2877 ** Returns BTM_SUCCESS if successful 2878 ** 2879 *******************************************************************************/ 2880 BTM_API extern tBTM_STATUS BTM_ReadInquiryRspTxPower (tBTM_CMPL_CB *p_cb); 2881 2882 /******************************************************************************* 2883 ** 2884 ** Function BTM_WriteInquiryTxPower 2885 ** 2886 ** Description This command is used to write the inquiry transmit power level 2887 ** used to transmit the inquiry (ID) data packets. The Controller 2888 ** should use the supported TX power level closest to the Tx_Power 2889 ** parameter. 2890 ** 2891 ** Returns BTM_SUCCESS if successful 2892 ** 2893 *******************************************************************************/ 2894 BTM_API extern tBTM_STATUS BTM_WriteInquiryTxPower (INT8 tx_power); 2895 2896 /******************************************************************************* 2897 ** 2898 ** Function BTM_StartDiscovery 2899 ** 2900 ** Description This function is called by an application (or profile) 2901 ** when it wants to trigger an service discovery using the 2902 ** BTM's discovery database. 2903 ** 2904 ** Returns tBTM_STATUS 2905 ** BTM_CMD_STARTED if the discovery was initiated 2906 ** BTM_BUSY if one is already in progress 2907 ** BTM_UNKNOWN_ADDR if no addresses are in the INQ DB 2908 ** BTM_ERR_PROCESSING if err initiating the command 2909 ** 2910 *******************************************************************************/ 2911 BTM_API extern tBTM_STATUS BTM_StartDiscovery (tBTM_CMPL_CB *p_cmpl_cb, 2912 BD_ADDR_PTR p_rem_addr); 2913 2914 2915 /******************************************************************************* 2916 ** 2917 ** Function BTM_FindAttribute 2918 ** 2919 ** Description This function is called by an application (or profile) 2920 ** when it wants to see if an attribute exists in the BTM 2921 ** discovery database. 2922 ** 2923 ** Returns Pointer to matching record, or NULL 2924 ** 2925 *******************************************************************************/ 2926 BTM_API extern tSDP_DISC_REC *BTM_FindAttribute (UINT16 attr_id, 2927 tSDP_DISC_REC *p_start_rec); 2928 2929 2930 /******************************************************************************* 2931 ** 2932 ** Function BTM_FindService 2933 ** 2934 ** Description This function is called by an application (or profile) 2935 ** when it wants to see if a service exists in the BTM 2936 ** discovery database. 2937 ** 2938 ** Returns Pointer to matching record, or NULL 2939 ** 2940 *******************************************************************************/ 2941 BTM_API extern tSDP_DISC_REC *BTM_FindService (UINT16 service_uuid, 2942 tSDP_DISC_REC *p_start_rec); 2943 2944 2945 /******************************************************************************* 2946 ** 2947 ** Function BTM_SetDiscoveryParams 2948 ** 2949 ** Description This function is called to set the BTM default discovery parameters. 2950 ** These UUID and attribute filters are used during the call to 2951 ** BTM_StartDiscovery. 2952 ** 2953 ** Returns void 2954 ** 2955 *******************************************************************************/ 2956 BTM_API extern void BTM_SetDiscoveryParams (UINT16 num_uuid, tSDP_UUID *p_uuid_list, 2957 UINT16 num_attr, UINT16 *p_attr_list); 2958 2959 2960 /***************************************************************************** 2961 ** ACL CHANNEL MANAGEMENT FUNCTIONS 2962 *****************************************************************************/ 2963 /******************************************************************************* 2964 ** 2965 ** Function BTM_SetLinkPolicy 2966 ** 2967 ** Description Create and send HCI "Write Policy Set" command 2968 ** 2969 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 2970 ** 2971 *******************************************************************************/ 2972 BTM_API extern tBTM_STATUS BTM_SetLinkPolicy (BD_ADDR remote_bda, 2973 UINT16 *settings); 2974 2975 2976 /******************************************************************************* 2977 ** 2978 ** Function BTM_ReadLinkPolicy 2979 ** 2980 ** Description This function is called to read the link policy settings. 2981 ** The address of link policy results are returned in the callback. 2982 ** (tBTM_LNK_POLICY_RESULTS) 2983 ** 2984 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 2985 ** 2986 *******************************************************************************/ 2987 BTM_API extern tBTM_STATUS BTM_ReadLinkPolicy (BD_ADDR remote_bda, 2988 tBTM_CMPL_CB *p_cb); 2989 2990 2991 /******************************************************************************* 2992 ** 2993 ** Function BTM_SetDefaultLinkPolicy 2994 ** 2995 ** Description Set the default value for HCI "Write Policy Set" command 2996 ** to use when an ACL link is created. 2997 ** 2998 ** Returns void 2999 ** 3000 *******************************************************************************/ 3001 BTM_API extern void BTM_SetDefaultLinkPolicy (UINT16 settings); 3002 3003 3004 /******************************************************************************* 3005 ** 3006 ** Function BTM_SetDefaultLinkSuperTout 3007 ** 3008 ** Description Set the default value for HCI "Write Link Supervision Timeout" 3009 ** command to use when an ACL link is created. 3010 ** 3011 ** Returns void 3012 ** 3013 *******************************************************************************/ 3014 BTM_API extern void BTM_SetDefaultLinkSuperTout (UINT16 timeout); 3015 3016 3017 /******************************************************************************* 3018 ** 3019 ** Function BTM_SetLinkSuperTout 3020 ** 3021 ** Description Create and send HCI "Write Link Supervision Timeout" command 3022 ** 3023 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 3024 ** 3025 *******************************************************************************/ 3026 BTM_API extern tBTM_STATUS BTM_SetLinkSuperTout (BD_ADDR remote_bda, 3027 UINT16 timeout); 3028 /******************************************************************************* 3029 ** 3030 ** Function BTM_GetLinkSuperTout 3031 ** 3032 ** Description Read the link supervision timeout value of the connection 3033 ** 3034 ** Returns status of the operation 3035 ** 3036 *******************************************************************************/ 3037 BTM_API extern tBTM_STATUS BTM_GetLinkSuperTout (BD_ADDR remote_bda, 3038 UINT16 *p_timeout); 3039 3040 /******************************************************************************* 3041 ** 3042 ** Function BTM_RegForLstoEvt 3043 ** 3044 ** Description register for the HCI "Link Supervision Timeout Change" event 3045 ** 3046 ** Returns void 3047 ** 3048 *******************************************************************************/ 3049 BTM_API extern void BTM_RegForLstoEvt (tBTM_LSTO_CBACK *p_cback); 3050 3051 3052 /* These next APIs are available if the power manager is not compiled in */ 3053 #if BTM_PWR_MGR_INCLUDED == FALSE 3054 /******************************************************************************* 3055 ** 3056 ** Function BTM_SetHoldMode 3057 ** 3058 ** Description This function is called to set a connection into hold mode. 3059 ** A check is made if the connection is in sniff or park mode, 3060 ** and if yes, the hold mode is ignored. 3061 ** 3062 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 3063 ** 3064 *******************************************************************************/ 3065 BTM_API extern tBTM_STATUS BTM_SetHoldMode (BD_ADDR remote_bda, UINT16 min_interval, 3066 UINT16 max_interval); 3067 3068 3069 /******************************************************************************* 3070 ** 3071 ** Function BTM_SetSniffMode 3072 ** 3073 ** Description This function is called to set a connection into sniff mode. 3074 ** A check is made if the connection is already in sniff or park 3075 ** mode, and if yes, the sniff mode is ignored. 3076 ** 3077 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 3078 ** 3079 *******************************************************************************/ 3080 BTM_API extern tBTM_STATUS BTM_SetSniffMode (BD_ADDR remote_bda, UINT16 min_period, 3081 UINT16 max_period, UINT16 attempt, 3082 UINT16 timeout); 3083 3084 3085 /******************************************************************************* 3086 ** 3087 ** Function BTM_CancelSniffMode 3088 ** 3089 ** Description This function is called to put a connection out of sniff mode. 3090 ** A check is made if the connection is already in sniff mode, 3091 ** and if not, the cancel sniff mode is ignored. 3092 ** 3093 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 3094 ** 3095 *******************************************************************************/ 3096 BTM_API extern tBTM_STATUS BTM_CancelSniffMode (BD_ADDR remote_bda); 3097 3098 3099 /******************************************************************************* 3100 ** 3101 ** Function BTM_SetParkMode 3102 ** 3103 ** Description This function is called to set a connection into park mode. 3104 ** A check is made if the connection is already in sniff or park 3105 ** mode, and if yes, the park mode is ignored. 3106 ** 3107 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 3108 ** 3109 *******************************************************************************/ 3110 BTM_API extern tBTM_STATUS BTM_SetParkMode (BD_ADDR remote_bda, 3111 UINT16 beacon_min_period, 3112 UINT16 beacon_max_period); 3113 3114 3115 /******************************************************************************* 3116 ** 3117 ** Function BTM_CancelParkMode 3118 ** 3119 ** Description This function is called to put a connection out of park mode. 3120 ** A check is made if the connection is already in park mode, 3121 ** and if not, the cancel sniff mode is ignored. 3122 ** 3123 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 3124 ** 3125 *******************************************************************************/ 3126 BTM_API extern tBTM_STATUS BTM_CancelParkMode (BD_ADDR remote_bda); 3127 3128 3129 /******************************************************************************* 3130 ** 3131 ** Function BTM_ReadAclMode 3132 ** 3133 ** Description This returns the current mode for a specific 3134 ** ACL connection. 3135 ** 3136 ** Input Param remote_bda - device address of desired ACL connection 3137 ** 3138 ** Output Param p_mode - address where the current mode is copied into. 3139 ** BTM_ACL_MODE_NORMAL 3140 ** BTM_ACL_MODE_HOLD 3141 ** BTM_ACL_MODE_SNIFF 3142 ** BTM_ACL_MODE_PARK 3143 ** (valid only if return code is BTM_SUCCESS) 3144 ** 3145 ** Returns BTM_SUCCESS if successful, 3146 ** BTM_UNKNOWN_ADDR if bd addr is not active or bad 3147 ** 3148 *******************************************************************************/ 3149 BTM_API extern tBTM_STATUS BTM_ReadAclMode (BD_ADDR remote_bda, UINT8 *p_mode); 3150 3151 #endif /* if BTM_PWR_MGR_INCLUDED == FALSE */ 3152 3153 3154 /******************************************************************************* 3155 ** 3156 ** Function BTM_SetPacketTypes 3157 ** 3158 ** Description This function is set the packet types used for a specific 3159 ** ACL connection, 3160 ** 3161 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 3162 ** 3163 *******************************************************************************/ 3164 BTM_API extern tBTM_STATUS BTM_SetPacketTypes (BD_ADDR remote_bda, UINT16 pkt_types); 3165 3166 3167 /******************************************************************************* 3168 ** 3169 ** Function BTM_ReadPacketTypes 3170 ** 3171 ** Description This function is set the packet types used for the specified 3172 ** ACL connection, 3173 ** 3174 ** Returns packet types supported for the connection, or 0 if no BD address 3175 ** 3176 *******************************************************************************/ 3177 BTM_API extern UINT16 BTM_ReadPacketTypes (BD_ADDR remote_bda); 3178 3179 3180 /******************************************************************************* 3181 ** 3182 ** Function BTM_IsAclConnectionUp 3183 ** 3184 ** Description This function is called to check if an ACL connection exists 3185 ** to a specific remote BD Address. 3186 ** 3187 ** Returns TRUE if connection is up, else FALSE. 3188 ** 3189 *******************************************************************************/ 3190 BTM_API extern BOOLEAN BTM_IsAclConnectionUp (BD_ADDR remote_bda); 3191 3192 3193 /******************************************************************************* 3194 ** 3195 ** Function BTM_GetRole 3196 ** 3197 ** Description This function is called to get the role of the local device 3198 ** for the ACL connection with the specified remote device 3199 ** 3200 ** Returns BTM_SUCCESS if connection exists. 3201 ** BTM_UNKNOWN_ADDR if no active link with bd addr specified 3202 ** 3203 *******************************************************************************/ 3204 BTM_API extern tBTM_STATUS BTM_GetRole (BD_ADDR remote_bd_addr, UINT8 *p_role); 3205 3206 3207 3208 /******************************************************************************* 3209 ** 3210 ** Function BTM_SwitchRole 3211 ** 3212 ** Description This function is called to switch role between master and 3213 ** slave. If role is already set it will do nothing. If the 3214 ** command was initiated, the callback function is called upon 3215 ** completion. 3216 ** 3217 ** Returns BTM_SUCCESS if already in specified role. 3218 ** BTM_CMD_STARTED if command issued to controller. 3219 ** BTM_NO_RESOURCES if couldn't allocate memory to issue command 3220 ** BTM_UNKNOWN_ADDR if no active link with bd addr specified 3221 ** BTM_MODE_UNSUPPORTED if local device does not support role switching 3222 ** 3223 *******************************************************************************/ 3224 BTM_API extern tBTM_STATUS BTM_SwitchRole (BD_ADDR remote_bd_addr, 3225 UINT8 new_role, 3226 tBTM_CMPL_CB *p_cb); 3227 3228 /******************************************************************************* 3229 ** 3230 ** Function BTM_ChangeLinkKey 3231 ** 3232 ** Description This function is called to change the link key of the 3233 ** connection. 3234 ** 3235 ** Returns BTM_CMD_STARTED if command issued to controller. 3236 ** BTM_NO_RESOURCES if couldn't allocate memory to issue command 3237 ** BTM_UNKNOWN_ADDR if no active link with bd addr specified 3238 ** BTM_BUSY if the previous command is not completed 3239 ** 3240 *******************************************************************************/ 3241 BTM_API extern tBTM_STATUS BTM_ChangeLinkKey (BD_ADDR remote_bd_addr, 3242 tBTM_CMPL_CB *p_cb); 3243 3244 /******************************************************************************* 3245 ** 3246 ** Function BTM_ReadRSSI 3247 ** 3248 ** Description This function is called to read the link policy settings. 3249 ** The address of link policy results are returned in the callback. 3250 ** (tBTM_RSSI_RESULTS) 3251 ** 3252 ** Returns BTM_CMD_STARTED if command issued to controller. 3253 ** BTM_NO_RESOURCES if couldn't allocate memory to issue command 3254 ** BTM_UNKNOWN_ADDR if no active link with bd addr specified 3255 ** BTM_BUSY if command is already in progress 3256 ** 3257 *******************************************************************************/ 3258 BTM_API extern tBTM_STATUS BTM_ReadRSSI (BD_ADDR remote_bda, tBTM_CMPL_CB *p_cb); 3259 3260 3261 /******************************************************************************* 3262 ** 3263 ** Function BTM_ReadTxPower 3264 ** 3265 ** Description This function is called to read the current connection 3266 ** TX power of the connection. The TX power level results 3267 ** are returned in the callback. 3268 ** (tBTM_RSSI_RESULTS) 3269 ** 3270 ** Returns BTM_CMD_STARTED if command issued to controller. 3271 ** BTM_NO_RESOURCES if couldn't allocate memory to issue command 3272 ** BTM_UNKNOWN_ADDR if no active link with bd addr specified 3273 ** BTM_BUSY if command is already in progress 3274 ** 3275 *******************************************************************************/ 3276 BTM_API extern tBTM_STATUS BTM_ReadTxPower (BD_ADDR remote_bda, tBTM_CMPL_CB *p_cb); 3277 3278 /******************************************************************************* 3279 ** 3280 ** Function BTM_ReadLinkQuality 3281 ** 3282 ** Description This function is called to read the link quality. 3283 ** The value of the link quality is returned in the callback. 3284 ** (tBTM_LINK_QUALITY_RESULTS) 3285 ** 3286 ** Returns BTM_CMD_STARTED if command issued to controller. 3287 ** BTM_NO_RESOURCES if couldn't allocate memory to issue command 3288 ** BTM_UNKNOWN_ADDR if no active link with bd addr specified 3289 ** BTM_BUSY if command is already in progress 3290 ** 3291 *******************************************************************************/ 3292 BTM_API extern tBTM_STATUS BTM_ReadLinkQuality (BD_ADDR remote_bda, tBTM_CMPL_CB *p_cb); 3293 3294 /******************************************************************************* 3295 ** 3296 ** Function BTM_RegBusyLevelNotif 3297 ** 3298 ** Description This function is called to register a callback to receive 3299 ** busy level change events. 3300 ** 3301 ** Returns BTM_SUCCESS if successfully registered, otherwise error 3302 ** 3303 *******************************************************************************/ 3304 BTM_API extern tBTM_STATUS BTM_RegBusyLevelNotif (tBTM_BL_CHANGE_CB *p_cb, UINT8 *p_level, 3305 tBTM_BL_EVENT_MASK evt_mask); 3306 3307 /******************************************************************************* 3308 ** 3309 ** Function BTM_AclRegisterForChanges 3310 ** 3311 ** Description This function is called to register a callback to receive 3312 ** ACL database change events, i.e. new connection or removed. 3313 ** 3314 ** Returns BTM_SUCCESS if successfully initiated, otherwise error 3315 ** 3316 *******************************************************************************/ 3317 BTM_API extern tBTM_STATUS BTM_AclRegisterForChanges (tBTM_ACL_DB_CHANGE_CB *p_cb); 3318 3319 /******************************************************************************* 3320 ** 3321 ** Function BTM_GetNumAclLinks 3322 ** 3323 ** Description This function is called to count the number of 3324 ** ACL links that are active. 3325 ** 3326 ** Returns UINT16 Number of active ACL links 3327 ** 3328 *******************************************************************************/ 3329 BTM_API extern UINT16 BTM_GetNumAclLinks (void); 3330 3331 3332 /******************************************************************************* 3333 ** 3334 ** Function BTM_ReadClockOffset 3335 ** 3336 ** Description This returns the clock offset for a specific 3337 ** ACL connection. 3338 ** 3339 ** Returns clock-offset or 0 if unknown 3340 ** 3341 *******************************************************************************/ 3342 BTM_API extern UINT16 BTM_ReadClockOffset (BD_ADDR remote_bda); 3343 3344 3345 /******************************************************************************* 3346 ** 3347 ** Function BTM_SetQoS 3348 ** 3349 ** Description This function is called to setup QoS 3350 ** 3351 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 3352 ** 3353 *******************************************************************************/ 3354 BTM_API extern tBTM_STATUS BTM_SetQoS(BD_ADDR bd, FLOW_SPEC *p_flow, 3355 tBTM_CMPL_CB *p_cb); 3356 3357 3358 /***************************************************************************** 3359 ** (e)SCO CHANNEL MANAGEMENT FUNCTIONS 3360 *****************************************************************************/ 3361 /******************************************************************************* 3362 ** 3363 ** Function BTM_CreateSco 3364 ** 3365 ** Description This function is called to create an SCO connection. If the 3366 ** "is_orig" flag is TRUE, the connection will be originated, 3367 ** otherwise BTM will wait for the other side to connect. 3368 ** 3369 ** Returns BTM_UNKNOWN_ADDR if the ACL connection is not up 3370 ** BTM_BUSY if another SCO being set up to 3371 ** the same BD address 3372 ** BTM_NO_RESOURCES if the max SCO limit has been reached 3373 ** BTM_CMD_STARTED if the connection establishment is started. 3374 ** In this case, "*p_sco_inx" is filled in 3375 ** with the sco index used for the connection. 3376 ** 3377 *******************************************************************************/ 3378 BTM_API extern tBTM_STATUS BTM_CreateSco (BD_ADDR remote_bda, BOOLEAN is_orig, 3379 UINT16 pkt_types, UINT16 *p_sco_inx, 3380 tBTM_SCO_CB *p_conn_cb, 3381 tBTM_SCO_CB *p_disc_cb); 3382 3383 3384 /******************************************************************************* 3385 ** 3386 ** Function BTM_RemoveSco 3387 ** 3388 ** Description This function is called to remove a specific SCO connection. 3389 ** 3390 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 3391 ** 3392 *******************************************************************************/ 3393 BTM_API extern tBTM_STATUS BTM_RemoveSco (UINT16 sco_inx); 3394 3395 3396 /******************************************************************************* 3397 ** 3398 ** Function BTM_SetScoPacketTypes 3399 ** 3400 ** Description This function is called to set the packet types used for 3401 ** a specific SCO connection, 3402 ** 3403 ** Parameters pkt_types - One or more of the following 3404 ** BTM_SCO_PKT_TYPES_MASK_HV1 3405 ** BTM_SCO_PKT_TYPES_MASK_HV2 3406 ** BTM_SCO_PKT_TYPES_MASK_HV3 3407 ** BTM_SCO_PKT_TYPES_MASK_EV3 3408 ** BTM_SCO_PKT_TYPES_MASK_EV4 3409 ** BTM_SCO_PKT_TYPES_MASK_EV5 3410 ** 3411 ** BTM_SCO_LINK_ALL_MASK - enables all supported types 3412 ** 3413 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 3414 ** 3415 *******************************************************************************/ 3416 BTM_API extern tBTM_STATUS BTM_SetScoPacketTypes (UINT16 sco_inx, UINT16 pkt_types); 3417 3418 3419 /******************************************************************************* 3420 ** 3421 ** Function BTM_ReadScoPacketTypes 3422 ** 3423 ** Description This function is read the packet types used for a specific 3424 ** SCO connection. 3425 ** 3426 ** Returns One or more of the following (bitmask) 3427 ** BTM_SCO_PKT_TYPES_MASK_HV1 3428 ** BTM_SCO_PKT_TYPES_MASK_HV2 3429 ** BTM_SCO_PKT_TYPES_MASK_HV3 3430 ** BTM_SCO_PKT_TYPES_MASK_EV3 3431 ** BTM_SCO_PKT_TYPES_MASK_EV4 3432 ** BTM_SCO_PKT_TYPES_MASK_EV5 3433 ** 3434 ** Returns packet types supported for the connection 3435 ** 3436 *******************************************************************************/ 3437 BTM_API extern UINT16 BTM_ReadScoPacketTypes (UINT16 sco_inx); 3438 3439 3440 /******************************************************************************* 3441 ** 3442 ** Function BTM_ReadDeviceScoPacketTypes 3443 ** 3444 ** Description This function is read the SCO packet types that 3445 ** the device supports. 3446 ** 3447 ** Returns packet types supported by the device. 3448 ** 3449 *******************************************************************************/ 3450 BTM_API extern UINT16 BTM_ReadDeviceScoPacketTypes (void); 3451 3452 3453 /******************************************************************************* 3454 ** 3455 ** Function BTM_ReadScoHandle 3456 ** 3457 ** Description This function is used to read the HCI handle used for a specific 3458 ** SCO connection, 3459 ** 3460 ** Returns handle for the connection, or 0xFFFF if invalid SCO index. 3461 ** 3462 *******************************************************************************/ 3463 BTM_API extern UINT16 BTM_ReadScoHandle (UINT16 sco_inx); 3464 3465 3466 /******************************************************************************* 3467 ** 3468 ** Function BTM_ReadScoBdAddr 3469 ** 3470 ** Description This function is read the remote BD Address for a specific 3471 ** SCO connection, 3472 ** 3473 ** Returns pointer to BD address or NULL if not known 3474 ** 3475 *******************************************************************************/ 3476 BTM_API extern UINT8 *BTM_ReadScoBdAddr (UINT16 sco_inx); 3477 3478 3479 /******************************************************************************* 3480 ** 3481 ** Function BTM_ReadScoDiscReason 3482 ** 3483 ** Description This function is returns the reason why an (e)SCO connection 3484 ** has been removed. It contains the value until read, or until 3485 ** another (e)SCO connection has disconnected. 3486 ** 3487 ** Returns HCI reason or BTM_INVALID_SCO_DISC_REASON if not set. 3488 ** 3489 *******************************************************************************/ 3490 BTM_API extern UINT16 BTM_ReadScoDiscReason (void); 3491 3492 3493 /******************************************************************************* 3494 ** 3495 ** Function BTM_SetEScoMode 3496 ** 3497 ** Description This function sets up the negotiated parameters for SCO or 3498 ** eSCO, and sets as the default mode used for calls to 3499 ** BTM_CreateSco. It can be called only when there are no 3500 ** active (e)SCO links. 3501 ** 3502 ** Returns BTM_SUCCESS if the successful. 3503 ** BTM_BUSY if there are one or more active (e)SCO links. 3504 ** 3505 *******************************************************************************/ 3506 BTM_API extern tBTM_STATUS BTM_SetEScoMode (tBTM_SCO_TYPE sco_mode, 3507 tBTM_ESCO_PARAMS *p_parms); 3508 3509 /******************************************************************************* 3510 ** 3511 ** Function BTM_SetWBSCodec 3512 ** 3513 ** Description This function sends command to the controller to setup 3514 ** WBS codec for the upcoming eSCO connection. 3515 ** 3516 ** Returns BTM_SUCCESS. 3517 ** 3518 ** 3519 *******************************************************************************/ 3520 BTM_API extern tBTM_STATUS BTM_SetWBSCodec (tBTM_SCO_CODEC_TYPE codec_type); 3521 3522 /******************************************************************************* 3523 ** 3524 ** Function BTM_RegForEScoEvts 3525 ** 3526 ** Description This function registers a SCO event callback with the 3527 ** specified instance. It should be used to received 3528 ** connection indication events and change of link parameter 3529 ** events. 3530 ** 3531 ** Returns BTM_SUCCESS if the successful. 3532 ** BTM_ILLEGAL_VALUE if there is an illegal sco_inx 3533 ** 3534 *******************************************************************************/ 3535 BTM_API extern tBTM_STATUS BTM_RegForEScoEvts (UINT16 sco_inx, 3536 tBTM_ESCO_CBACK *p_esco_cback); 3537 3538 /******************************************************************************* 3539 ** 3540 ** Function BTM_ReadEScoLinkParms 3541 ** 3542 ** Description This function returns the current eSCO link parameters for 3543 ** the specified handle. This can be called anytime a connection 3544 ** is active, but is typically called after receiving the SCO 3545 ** opened callback. 3546 ** 3547 ** Note: If called over a 1.1 controller, only the packet types 3548 ** field has meaning. 3549 ** Note: If the upper layer doesn't know the current sco index, 3550 ** BTM_FIRST_ACTIVE_SCO_INDEX can be used as the first parameter to 3551 ** find the first active SCO index 3552 ** 3553 ** Returns BTM_SUCCESS if returned data is valid connection. 3554 ** BTM_ILLEGAL_VALUE if no connection for specified sco_inx. 3555 ** BTM_MODE_UNSUPPORTED if local controller does not support 3556 ** 1.2 specification. 3557 ** 3558 *******************************************************************************/ 3559 BTM_API extern tBTM_STATUS BTM_ReadEScoLinkParms (UINT16 sco_inx, 3560 tBTM_ESCO_DATA *p_parms); 3561 3562 /******************************************************************************* 3563 ** 3564 ** Function BTM_ChangeEScoLinkParms 3565 ** 3566 ** Description This function requests renegotiation of the parameters on 3567 ** the current eSCO Link. If any of the changes are accepted 3568 ** by the controllers, the BTM_ESCO_CHG_EVT event is sent in 3569 ** the tBTM_ESCO_CBACK function with the current settings of 3570 ** the link. The callback is registered through the call to 3571 ** BTM_SetEScoMode. 3572 ** 3573 ** 3574 ** Returns BTM_CMD_STARTED if command is successfully initiated. 3575 ** BTM_ILLEGAL_VALUE if no connection for specified sco_inx. 3576 ** BTM_NO_RESOURCES - not enough resources to initiate command. 3577 ** BTM_MODE_UNSUPPORTED if local controller does not support 3578 ** 1.2 specification. 3579 ** 3580 *******************************************************************************/ 3581 BTM_API extern tBTM_STATUS BTM_ChangeEScoLinkParms (UINT16 sco_inx, 3582 tBTM_CHG_ESCO_PARAMS *p_parms); 3583 3584 /******************************************************************************* 3585 ** 3586 ** Function BTM_EScoConnRsp 3587 ** 3588 ** Description This function is called upon receipt of an (e)SCO connection 3589 ** request event (BTM_ESCO_CONN_REQ_EVT) to accept or reject 3590 ** the request. Parameters used to negotiate eSCO links. 3591 ** If p_parms is NULL, then values set through BTM_SetEScoMode 3592 ** are used. 3593 ** If the link type of the incoming request is SCO, then only 3594 ** the tx_bw, max_latency, content format, and packet_types are 3595 ** valid. The hci_status parameter should be 3596 ** ([0x0] to accept, [0x0d..0x0f] to reject) 3597 ** 3598 ** 3599 ** Returns void 3600 ** 3601 *******************************************************************************/ 3602 BTM_API extern void BTM_EScoConnRsp (UINT16 sco_inx, UINT8 hci_status, 3603 tBTM_ESCO_PARAMS *p_parms); 3604 3605 /******************************************************************************* 3606 ** 3607 ** Function BTM_GetNumScoLinks 3608 ** 3609 ** Description This function returns the number of active SCO links. 3610 ** 3611 ** Returns UINT8 3612 ** 3613 *******************************************************************************/ 3614 BTM_API extern UINT8 BTM_GetNumScoLinks (void); 3615 3616 /***************************************************************************** 3617 ** SECURITY MANAGEMENT FUNCTIONS 3618 *****************************************************************************/ 3619 /******************************************************************************* 3620 ** 3621 ** Function BTM_SecRegister 3622 ** 3623 ** Description Application manager calls this function to register for 3624 ** security services. There can be one and only one application 3625 ** saving link keys. BTM allows only first registration. 3626 ** 3627 ** Returns TRUE if registered OK, else FALSE 3628 ** 3629 *******************************************************************************/ 3630 BTM_API extern BOOLEAN BTM_SecRegister (tBTM_APPL_INFO *p_cb_info); 3631 3632 3633 /******************************************************************************* 3634 ** 3635 ** Function BTM_SecRegisterLinkKeyNotificationCallback 3636 ** 3637 ** Description Profiles can register to be notified when a new Link Key 3638 ** is generated per connection. 3639 ** 3640 ** Returns TRUE if registered OK, else FALSE 3641 ** 3642 *******************************************************************************/ 3643 BTM_API extern BOOLEAN BTM_SecRegisterLinkKeyNotificationCallback (tBTM_LINK_KEY_CALLBACK *p_callback); 3644 3645 3646 /******************************************************************************* 3647 ** 3648 ** Function BTM_SecAddRmtNameNotifyCallback 3649 ** 3650 ** Description Profiles can register to be notified when name of the 3651 ** remote device is resolved (up to BTM_SEC_MAX_RMT_NAME_CALLBACKS). 3652 ** 3653 ** Returns TRUE if registered OK, else FALSE 3654 ** 3655 *******************************************************************************/ 3656 BTM_API extern BOOLEAN BTM_SecAddRmtNameNotifyCallback (tBTM_RMT_NAME_CALLBACK *p_callback); 3657 3658 3659 /******************************************************************************* 3660 ** 3661 ** Function BTM_SecDeleteRmtNameNotifyCallback 3662 ** 3663 ** Description A profile can deregister notification when a new Link Key 3664 ** is generated per connection. 3665 ** 3666 ** Returns TRUE if OK, else FALSE 3667 ** 3668 *******************************************************************************/ 3669 BTM_API extern BOOLEAN BTM_SecDeleteRmtNameNotifyCallback (tBTM_RMT_NAME_CALLBACK *p_callback); 3670 3671 3672 /******************************************************************************* 3673 ** 3674 ** Function BTM_SecSetConnectFilterCallback 3675 ** 3676 ** Description Host can register to be asked whenever an HCI connection 3677 ** request is received. In the registered function host 3678 ** suppose to check connectibility filters. Yes/No result 3679 ** should be returned synchronously. 3680 ** 3681 ** Returns void 3682 ** 3683 *******************************************************************************/ 3684 BTM_API extern void BTM_SecSetConnectFilterCallback (tBTM_FILTER_CB *p_callback); 3685 3686 3687 /******************************************************************************* 3688 ** 3689 ** Function BTM_GetSecurityMode 3690 ** 3691 ** Description Get security mode for the device 3692 ** 3693 ** Returns void 3694 ** 3695 *******************************************************************************/ 3696 BTM_API extern UINT8 BTM_GetSecurityMode (void); 3697 3698 3699 /******************************************************************************* 3700 ** 3701 ** Function BTM_GetSecurityFlags 3702 ** 3703 ** Description Get security flags for the device 3704 ** 3705 ** Returns BOOLEAN TRUE or FALSE is device found 3706 ** 3707 *******************************************************************************/ 3708 BTM_API extern BOOLEAN BTM_GetSecurityFlags (BD_ADDR bd_addr, UINT8 * p_sec_flags); 3709 3710 /******************************************************************************* 3711 ** 3712 ** Function BTM_ReadTrustedMask 3713 ** 3714 ** Description Get trusted mask for the device 3715 ** 3716 ** Returns NULL, if the device record is not found. 3717 ** otherwise, the trusted mask 3718 ** 3719 *******************************************************************************/ 3720 BTM_API extern UINT32 * BTM_ReadTrustedMask (BD_ADDR bd_addr); 3721 3722 3723 /******************************************************************************* 3724 ** 3725 ** Function BTM_SetSecurityMode 3726 ** 3727 ** Description Set security mode for the device 3728 ** 3729 ** Returns void 3730 ** 3731 *******************************************************************************/ 3732 BTM_API extern void BTM_SetSecurityMode (UINT8 sec_mode); 3733 3734 3735 /******************************************************************************* 3736 ** 3737 ** Function BTM_SetPinType 3738 ** 3739 ** Description Set PIN type for the device. 3740 ** 3741 ** Returns void 3742 ** 3743 *******************************************************************************/ 3744 BTM_API extern void BTM_SetPinType (UINT8 pin_type, PIN_CODE pin_code, UINT8 pin_code_len); 3745 3746 3747 /******************************************************************************* 3748 ** 3749 ** Function BTM_SetPairableMode 3750 ** 3751 ** Description Enable or disable pairing 3752 ** 3753 ** Parameters allow_pairing - (TRUE or FALSE) whether or not the device 3754 ** allows pairing. 3755 ** connect_only_paired - (TRUE or FALSE) whether or not to 3756 ** only allow paired devices to connect. 3757 ** 3758 ** Returns void 3759 ** 3760 *******************************************************************************/ 3761 BTM_API extern void BTM_SetPairableMode (BOOLEAN allow_pairing, BOOLEAN connect_only_paired); 3762 3763 /******************************************************************************* 3764 ** 3765 ** Function BTM_SetSecurityLevel 3766 ** 3767 ** Description Register service security level with Security Manager. Each 3768 ** service must register its requirements regardless of the 3769 ** security level that is used. This API is called once for originators 3770 ** nad again for acceptors of connections. 3771 ** 3772 ** Returns TRUE if registered OK, else FALSE 3773 ** 3774 *******************************************************************************/ 3775 BTM_API extern BOOLEAN BTM_SetSecurityLevel (BOOLEAN is_originator, char *p_name, 3776 UINT8 service_id, UINT16 sec_level, 3777 UINT16 psm, UINT32 mx_proto_id, 3778 UINT32 mx_chan_id); 3779 3780 /******************************************************************************* 3781 ** 3782 ** Function BTM_SetUCDSecurityLevel 3783 ** 3784 ** Description Register UCD service security level with Security Manager. Each 3785 ** service must register its requirements regardless of the 3786 ** security level that is used. This API is called once for originators 3787 ** and again for acceptors of connections. 3788 ** 3789 ** Returns TRUE if registered OK, else FALSE 3790 ** 3791 *******************************************************************************/ 3792 BTM_API extern BOOLEAN BTM_SetUCDSecurityLevel (BOOLEAN is_originator, char *p_name, UINT8 service_id, 3793 UINT16 sec_level, UINT16 psm, UINT32 mx_proto_id, 3794 UINT32 mx_chan_id); 3795 3796 /******************************************************************************* 3797 ** 3798 ** Function BTM_SetOutService 3799 ** 3800 ** Description This function is called to set the service for 3801 ** outgoing connection. 3802 ** 3803 ** Returns void 3804 ** 3805 *******************************************************************************/ 3806 BTM_API extern void BTM_SetOutService(BD_ADDR bd_addr, UINT8 service_id, UINT32 mx_chan_id); 3807 3808 /******************************************************************************* 3809 ** 3810 ** Function BTM_SecClrService 3811 ** 3812 ** Description Removes specified service record(s) from the security database. 3813 ** All service records with the specified name are removed. 3814 ** Typically used only by devices with limited RAM so that it can 3815 ** reuse an old security service record. 3816 ** records (except SDP). 3817 ** 3818 ** Returns Number of records that were freed. 3819 ** 3820 *******************************************************************************/ 3821 BTM_API extern UINT8 BTM_SecClrService (UINT8 service_id); 3822 3823 /******************************************************************************* 3824 ** 3825 ** Function BTM_SecClrUCDService 3826 ** 3827 ** Description 3828 ** 3829 ** Parameters Service ID - Id of the service to remove. ('0' removes all service 3830 ** records. 3831 ** 3832 ** Returns Number of records that were freed. 3833 ** 3834 *******************************************************************************/ 3835 BTM_API extern UINT8 BTM_SecClrUCDService (UINT8 service_id); 3836 3837 /******************************************************************************* 3838 ** 3839 ** Function BTM_SecAddDevice 3840 ** 3841 ** Description Add/modify device. This function will be normally called 3842 ** during host startup to restore all required information 3843 ** stored in the NVRAM. 3844 ** dev_class, bd_name, link_key, and features are NULL if unknown 3845 ** 3846 ** Returns TRUE if added OK, else FALSE 3847 ** 3848 *******************************************************************************/ 3849 BTM_API extern BOOLEAN BTM_SecAddDevice (BD_ADDR bd_addr, DEV_CLASS dev_class, 3850 BD_NAME bd_name, UINT8 *features, 3851 UINT32 trusted_mask[], LINK_KEY link_key, 3852 UINT8 key_type, tBTM_IO_CAP io_cap); 3853 3854 3855 /******************************************************************************* 3856 ** 3857 ** Function BTM_SecDeleteDevice 3858 ** 3859 ** Description Free resources associated with the device. 3860 ** 3861 ** Returns TRUE if rmoved OK, FALSE if not found 3862 ** 3863 *******************************************************************************/ 3864 BTM_API extern BOOLEAN BTM_SecDeleteDevice (BD_ADDR bd_addr); 3865 3866 3867 /******************************************************************************* 3868 ** 3869 ** Function BTM_SecUseMasterLinkKey 3870 ** 3871 ** Description This function is called to tell master of the piconet to 3872 ** switch to master link key 3873 ** 3874 ** Returns BTM_SUCCESS if command is successully initiated 3875 ** 3876 *******************************************************************************/ 3877 BTM_API extern tBTM_STATUS BTM_SecUseMasterLinkKey (BOOLEAN use_master_key); 3878 3879 3880 /******************************************************************************* 3881 ** 3882 ** Function BTM_SetMasterKeyCompCback 3883 ** 3884 ** Description This function is called to register for the master key complete 3885 ** status event. 3886 ** 3887 ** Parameters: mkey_cback - callback registered with the security manager 3888 ** 3889 ** Returns void 3890 ** 3891 *******************************************************************************/ 3892 BTM_API extern void BTM_SetMasterKeyCompCback(tBTM_MKEY_CALLBACK *mkey_cback ); 3893 3894 3895 /******************************************************************************* 3896 ** 3897 ** Function BTM_SecGetDeviceLinkKey 3898 ** 3899 ** Description This function is called to obtain link key for the device 3900 ** it returns BTM_SUCCESS if link key is available, or 3901 ** BTM_UNKNOWN_ADDR if Security Manager does not know about 3902 ** the device or device record does not contain link key info 3903 ** 3904 ** Returns BTM_SUCCESS if successful, otherwise error code 3905 ** 3906 *******************************************************************************/ 3907 BTM_API extern tBTM_STATUS BTM_SecGetDeviceLinkKey (BD_ADDR bd_addr, 3908 LINK_KEY link_key); 3909 3910 3911 /******************************************************************************* 3912 ** 3913 ** Function BTM_PINCodeReply 3914 ** 3915 ** Description This function is called after Security Manager submitted 3916 ** PIN code request to the UI. 3917 ** 3918 ** Parameters: bd_addr - Address of the device for which PIN was requested 3919 ** res - result of the operation BTM_SUCCESS if success 3920 ** pin_len - length in bytes of the PIN Code 3921 ** p_pin - pointer to array with the PIN Code 3922 ** trusted_mask - bitwise OR of trusted services (array of UINT32) 3923 ** 3924 ** Returns void 3925 ** 3926 *******************************************************************************/ 3927 BTM_API extern void BTM_PINCodeReply (BD_ADDR bd_addr, UINT8 res, UINT8 pin_len, 3928 UINT8 *p_pin, UINT32 trusted_mask[]); 3929 3930 3931 /******************************************************************************* 3932 ** 3933 ** Function BTM_DeviceAuthorized 3934 ** 3935 ** Description This function is called after Security Manager submitted 3936 ** authorization request to the UI. 3937 ** 3938 ** Parameters: bd_addr - Address of the device for which PIN was requested 3939 ** res - result of the operation BTM_SUCCESS if success 3940 ** 3941 ** Returns void 3942 ** 3943 *******************************************************************************/ 3944 BTM_API extern void BTM_DeviceAuthorized (BD_ADDR bd_addr, UINT8 res, 3945 UINT32 trusted_mask[]); 3946 3947 3948 /******************************************************************************* 3949 ** 3950 ** Function BTM_SecBond 3951 ** 3952 ** Description This function is called to perform bonding with peer device. 3953 ** 3954 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 3955 ** 3956 *******************************************************************************/ 3957 BTM_API extern tBTM_STATUS BTM_SecBond (BD_ADDR bd_addr, UINT8 pin_len, UINT8 *p_pin, UINT32 trusted_mask[]); 3958 3959 /******************************************************************************* 3960 ** 3961 ** Function BTM_SecBondCancel 3962 ** 3963 ** Description This function is called to cancel ongoing bonding process 3964 ** with peer device. 3965 ** 3966 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 3967 ** 3968 *******************************************************************************/ 3969 BTM_API extern tBTM_STATUS BTM_SecBondCancel (BD_ADDR bd_addr); 3970 3971 /******************************************************************************* 3972 ** 3973 ** Function BTM_SetEncryption 3974 ** 3975 ** Description This function is called to ensure that connection is 3976 ** encrypted. Should be called only on an open connection. 3977 ** Typically only needed for connections that first want to 3978 ** bring up unencrypted links, then later encrypt them. 3979 ** 3980 ** Parameters: bd_addr - Address of the peer device 3981 ** p_callback - Pointer to callback function called if 3982 ** this function returns PENDING after required 3983 ** procedures are completed. Can be set to NULL 3984 ** if status is not desired. 3985 ** p_ref_data - pointer to any data the caller wishes to receive 3986 ** in the callback function upon completion. 3987 * can be set to NULL if not used. 3988 ** 3989 ** Returns BTM_SUCCESS - already encrypted 3990 ** BTM_PENDING - command will be returned in the callback 3991 ** BTM_WRONG_MODE- connection not up. 3992 ** BTM_BUSY - security procedures are currently active 3993 ** BTM_MODE_UNSUPPORTED - if security manager not linked in. 3994 ** 3995 *******************************************************************************/ 3996 BTM_API extern tBTM_STATUS BTM_SetEncryption (BD_ADDR bd_addr, tBTM_SEC_CBACK *p_callback, 3997 void *p_ref_data); 3998 3999 /******************************************************************************* 4000 ** 4001 ** Function BTM_ConfirmReqReply 4002 ** 4003 ** Description This function is called to confirm the numeric value for 4004 ** Simple Pairing in response to BTM_SP_CFM_REQ_EVT 4005 ** 4006 ** Parameters: res - result of the operation BTM_SUCCESS if success 4007 ** bd_addr - Address of the peer device 4008 ** 4009 *******************************************************************************/ 4010 BTM_API extern void BTM_ConfirmReqReply(tBTM_STATUS res, BD_ADDR bd_addr); 4011 4012 /******************************************************************************* 4013 ** 4014 ** Function BTM_PasskeyReqReply 4015 ** 4016 ** Description This function is called to provide the passkey for 4017 ** Simple Pairing in response to BTM_SP_KEY_REQ_EVT 4018 ** 4019 ** Parameters: res - result of the operation BTM_SUCCESS if success 4020 ** bd_addr - Address of the peer device 4021 ** passkey - numeric value in the range of 0 - 999999(0xF423F). 4022 ** 4023 *******************************************************************************/ 4024 BTM_API extern void BTM_PasskeyReqReply(tBTM_STATUS res, BD_ADDR bd_addr, UINT32 passkey); 4025 4026 /******************************************************************************* 4027 ** 4028 ** Function BTM_SendKeypressNotif 4029 ** 4030 ** Description This function is used during the passkey entry model 4031 ** by a device with KeyboardOnly IO capabilities 4032 ** (very likely to be a HID Device). 4033 ** It is called by a HID Device to inform the remote device when 4034 ** a key has been entered or erased. 4035 ** 4036 ** Parameters: bd_addr - Address of the peer device 4037 ** type - notification type 4038 ** 4039 *******************************************************************************/ 4040 BTM_API extern void BTM_SendKeypressNotif(BD_ADDR bd_addr, tBTM_SP_KEY_TYPE type); 4041 4042 /******************************************************************************* 4043 ** 4044 ** Function BTM_IoCapRsp 4045 ** 4046 ** Description This function is called in response to BTM_SP_IO_REQ_EVT 4047 ** When the event data io_req.oob_data is set to BTM_OOB_UNKNOWN 4048 ** by the tBTM_SP_CALLBACK implementation, this function is 4049 ** called to provide the actual response 4050 ** 4051 ** Parameters: bd_addr - Address of the peer device 4052 ** io_cap - The IO capability of local device. 4053 ** oob - BTM_OOB_NONE or BTM_OOB_PRESENT. 4054 ** auth_req- MITM protection required or not. 4055 ** 4056 *******************************************************************************/ 4057 BTM_API extern void BTM_IoCapRsp(BD_ADDR bd_addr, tBTM_IO_CAP io_cap, 4058 tBTM_OOB_DATA oob, tBTM_AUTH_REQ auth_req); 4059 4060 /******************************************************************************* 4061 ** 4062 ** Function BTM_ReadLocalOobData 4063 ** 4064 ** Description This function is called to read the local OOB data from 4065 ** LM 4066 ** 4067 *******************************************************************************/ 4068 BTM_API extern tBTM_STATUS BTM_ReadLocalOobData(void); 4069 4070 /******************************************************************************* 4071 ** 4072 ** Function BTM_RemoteOobDataReply 4073 ** 4074 ** Description This function is called to provide the remote OOB data for 4075 ** Simple Pairing in response to BTM_SP_RMT_OOB_EVT 4076 ** 4077 ** Parameters: bd_addr - Address of the peer device 4078 ** c - simple pairing Hash C. 4079 ** r - simple pairing Randomizer C. 4080 ** 4081 *******************************************************************************/ 4082 BTM_API extern void BTM_RemoteOobDataReply(tBTM_STATUS res, BD_ADDR bd_addr, BT_OCTET16 c, BT_OCTET16 r); 4083 4084 /******************************************************************************* 4085 ** 4086 ** Function BTM_BuildOobData 4087 ** 4088 ** Description This function is called to build the OOB data payload to 4089 ** be sent over OOB (non-Bluetooth) link 4090 ** 4091 ** Parameters: p_data - the location for OOB data 4092 ** max_len - p_data size. 4093 ** c - simple pairing Hash C. 4094 ** r - simple pairing Randomizer C. 4095 ** name_len- 0, local device name would not be included. 4096 ** otherwise, the local device name is included for 4097 ** up to this specified length 4098 ** 4099 ** Returns Number of bytes in p_data. 4100 ** 4101 *******************************************************************************/ 4102 BTM_API extern UINT16 BTM_BuildOobData(UINT8 *p_data, UINT16 max_len, BT_OCTET16 c, 4103 BT_OCTET16 r, UINT8 name_len); 4104 4105 /******************************************************************************* 4106 ** 4107 ** Function BTM_ReadOobData 4108 ** 4109 ** Description This function is called to parse the OOB data payload 4110 ** received over OOB (non-Bluetooth) link 4111 ** 4112 ** Parameters: p_data - the location for OOB data 4113 ** eir_tag - The associated EIR tag to read the data. 4114 ** *p_len(output) - the length of the data with the given tag. 4115 ** 4116 ** Returns the beginning of the data with the given tag. 4117 ** NULL, if the tag is not found. 4118 ** 4119 *******************************************************************************/ 4120 BTM_API extern UINT8 * BTM_ReadOobData(UINT8 *p_data, UINT8 eir_tag, UINT8 *p_len); 4121 4122 /******************************************************************************* 4123 ** 4124 ** Function BTM_SecReadDevName 4125 ** 4126 ** Description Looks for the device name in the security database for the 4127 ** specified BD address. 4128 ** 4129 ** Returns Pointer to the name or NULL 4130 ** 4131 *******************************************************************************/ 4132 BTM_API extern char *BTM_SecReadDevName (BD_ADDR bd_addr); 4133 4134 4135 /***************************************************************************** 4136 ** POWER MANAGEMENT FUNCTIONS 4137 *****************************************************************************/ 4138 /******************************************************************************* 4139 ** 4140 ** Function BTM_PmRegister 4141 ** 4142 ** Description register or deregister with power manager 4143 ** 4144 ** Returns BTM_SUCCESS if successful, 4145 ** BTM_NO_RESOURCES if no room to hold registration 4146 ** BTM_ILLEGAL_VALUE 4147 ** 4148 *******************************************************************************/ 4149 BTM_API extern tBTM_STATUS BTM_PmRegister (UINT8 mask, UINT8 *p_pm_id, 4150 tBTM_PM_STATUS_CBACK *p_cb); 4151 4152 4153 /******************************************************************************* 4154 ** 4155 ** Function BTM_SetPowerMode 4156 ** 4157 ** Description store the mode in control block or 4158 ** alter ACL connection behavior. 4159 ** 4160 ** Returns BTM_SUCCESS if successful, 4161 ** BTM_UNKNOWN_ADDR if bd addr is not active or bad 4162 ** 4163 *******************************************************************************/ 4164 BTM_API extern tBTM_STATUS BTM_SetPowerMode (UINT8 pm_id, BD_ADDR remote_bda, 4165 tBTM_PM_PWR_MD *p_mode); 4166 4167 4168 /******************************************************************************* 4169 ** 4170 ** Function BTM_ReadPowerMode 4171 ** 4172 ** Description This returns the current mode for a specific 4173 ** ACL connection. 4174 ** 4175 ** Input Param remote_bda - device address of desired ACL connection 4176 ** 4177 ** Output Param p_mode - address where the current mode is copied into. 4178 ** BTM_ACL_MODE_NORMAL 4179 ** BTM_ACL_MODE_HOLD 4180 ** BTM_ACL_MODE_SNIFF 4181 ** BTM_ACL_MODE_PARK 4182 ** (valid only if return code is BTM_SUCCESS) 4183 ** 4184 ** Returns BTM_SUCCESS if successful, 4185 ** BTM_UNKNOWN_ADDR if bd addr is not active or bad 4186 ** 4187 *******************************************************************************/ 4188 BTM_API extern tBTM_STATUS BTM_ReadPowerMode (BD_ADDR remote_bda, 4189 tBTM_PM_MODE *p_mode); 4190 4191 /******************************************************************************* 4192 ** 4193 ** Function BTM_SetSsrParams 4194 ** 4195 ** Description This sends the given SSR parameters for the given ACL 4196 ** connection if it is in ACTIVE mode. 4197 ** 4198 ** Input Param remote_bda - device address of desired ACL connection 4199 ** max_lat - maximum latency (in 0.625ms)(0-0xFFFE) 4200 ** min_rmt_to - minimum remote timeout 4201 ** min_loc_to - minimum local timeout 4202 ** 4203 ** 4204 ** Returns BTM_SUCCESS if the HCI command is issued successful, 4205 ** BTM_UNKNOWN_ADDR if bd addr is not active or bad 4206 ** BTM_CMD_STORED if the command is stored 4207 ** 4208 *******************************************************************************/ 4209 BTM_API extern tBTM_STATUS BTM_SetSsrParams (BD_ADDR remote_bda, UINT16 max_lat, 4210 UINT16 min_rmt_to, UINT16 min_loc_to); 4211 4212 /******************************************************************************* 4213 ** 4214 ** Function BTM_IsPowerManagerOn 4215 ** 4216 ** Description This function is called to check if power manager is included. 4217 ** in the BTE version. 4218 ** 4219 ** Returns TRUE if power manager is compiled in, otherwise FALSE. 4220 ** 4221 *******************************************************************************/ 4222 BTM_API extern BOOLEAN BTM_IsPowerManagerOn (void); 4223 4224 4225 /******************************************************************************* 4226 ** 4227 ** Function BTM_GetHCIConnHandle 4228 ** 4229 ** Description This function is called to get the handle for an ACL connection 4230 ** to a specific remote BD Address. 4231 ** 4232 ** Returns the handle of the connection, or 0xFFFF if none. 4233 ** 4234 *******************************************************************************/ 4235 BTM_API extern UINT16 BTM_GetHCIConnHandle (BD_ADDR remote_bda); 4236 4237 4238 /******************************************************************************* 4239 ** 4240 ** Function BTM_ReadStoredLinkKey 4241 ** 4242 ** Description This function is called to obtain link key for the specified 4243 ** device from the NVRAM storage attached to the Bluetooth 4244 ** controller. 4245 ** 4246 ** Parameters: bd_addr - Address of the device 4247 ** p_cb - Call back function to be called to return 4248 ** the results 4249 ** 4250 *******************************************************************************/ 4251 BTM_API extern tBTM_STATUS BTM_ReadStoredLinkKey (BD_ADDR bd_addr, tBTM_CMPL_CB *p_cb); 4252 4253 4254 /******************************************************************************* 4255 ** 4256 ** Function BTM_WriteStoredLinkKey 4257 ** 4258 ** Description This function is called to write link keys for the specified 4259 ** device addresses to the NVRAM storage attached to the Bluetooth 4260 ** controller. 4261 ** 4262 ** Parameters: num_keys - Number of link keys 4263 ** bd_addr - Addresses of the devices 4264 ** link_key - Link Keys to be stored 4265 ** p_cb - Call back function to be called to return 4266 ** the results 4267 ** 4268 *******************************************************************************/ 4269 BTM_API extern tBTM_STATUS BTM_WriteStoredLinkKey (UINT8 num_keys, 4270 BD_ADDR *bd_addr, 4271 LINK_KEY *link_key, 4272 tBTM_CMPL_CB *p_cb); 4273 4274 4275 /******************************************************************************* 4276 ** 4277 ** Function BTM_DeleteStoredLinkKey 4278 ** 4279 ** Description This function is called to delete link key for the specified 4280 ** device addresses from the NVRAM storage attached to the Bluetooth 4281 ** controller. 4282 ** 4283 ** Parameters: bd_addr - Addresses of the devices 4284 ** p_cb - Call back function to be called to return 4285 ** the results 4286 ** 4287 *******************************************************************************/ 4288 BTM_API extern tBTM_STATUS BTM_DeleteStoredLinkKey(BD_ADDR bd_addr, tBTM_CMPL_CB *p_cb); 4289 4290 /******************************************************************************* 4291 ** 4292 ** Function BTM_WriteEIR 4293 ** 4294 ** Description This function is called to write EIR data to controller. 4295 ** 4296 ** Parameters p_buff - allocated HCI command buffer including extended 4297 ** inquriry response 4298 ** 4299 ** Returns BTM_SUCCESS - if successful 4300 ** BTM_MODE_UNSUPPORTED - if local device cannot support it 4301 ** 4302 *******************************************************************************/ 4303 BTM_API extern tBTM_STATUS BTM_WriteEIR( BT_HDR * p_buff ); 4304 4305 /******************************************************************************* 4306 ** 4307 ** Function BTM_CheckEirData 4308 ** 4309 ** Description This function is called to get EIR data from significant part. 4310 ** 4311 ** Parameters p_eir - pointer of EIR significant part 4312 ** type - finding EIR data type 4313 ** p_length - return the length of EIR data 4314 ** 4315 ** Returns pointer of EIR data 4316 ** 4317 *******************************************************************************/ 4318 BTM_API extern UINT8 *BTM_CheckEirData( UINT8 *p_eir, UINT8 type, UINT8 *p_length ); 4319 4320 /******************************************************************************* 4321 ** 4322 ** Function BTM_HasEirService 4323 ** 4324 ** Description This function is called to know if UUID in bit map of UUID. 4325 ** 4326 ** Parameters p_eir_uuid - bit map of UUID list 4327 ** uuid16 - UUID 16-bit 4328 ** 4329 ** Returns TRUE - if found 4330 ** FALSE - if not found 4331 ** 4332 *******************************************************************************/ 4333 BTM_API extern BOOLEAN BTM_HasEirService( UINT32 *p_eir_uuid, UINT16 uuid16 ); 4334 4335 /******************************************************************************* 4336 ** 4337 ** Function BTM_HasInquiryEirService 4338 ** 4339 ** Description This function is called to know if UUID in bit map of UUID list. 4340 ** 4341 ** Parameters p_results - inquiry results 4342 ** uuid16 - UUID 16-bit 4343 ** 4344 ** Returns BTM_EIR_FOUND - if found 4345 ** BTM_EIR_NOT_FOUND - if not found and it is complete list 4346 ** BTM_EIR_UNKNOWN - if not found and it is not complete list 4347 ** 4348 *******************************************************************************/ 4349 BTM_API extern tBTM_EIR_SEARCH_RESULT BTM_HasInquiryEirService( tBTM_INQ_RESULTS *p_results, 4350 UINT16 uuid16 ); 4351 4352 /******************************************************************************* 4353 ** 4354 ** Function BTM_AddEirService 4355 ** 4356 ** Description This function is called to add a service in bit map of UUID list. 4357 ** 4358 ** Parameters p_eir_uuid - bit mask of UUID list for EIR 4359 ** uuid16 - UUID 16-bit 4360 ** 4361 ** Returns None 4362 ** 4363 *******************************************************************************/ 4364 BTM_API extern void BTM_AddEirService( UINT32 *p_eir_uuid, UINT16 uuid16 ); 4365 4366 /******************************************************************************* 4367 ** 4368 ** Function BTM_RemoveEirService 4369 ** 4370 ** Description This function is called to remove a service in bit map of UUID list. 4371 ** 4372 ** Parameters p_eir_uuid - bit mask of UUID list for EIR 4373 ** uuid16 - UUID 16-bit 4374 ** 4375 ** Returns None 4376 ** 4377 *******************************************************************************/ 4378 BTM_API extern void BTM_RemoveEirService( UINT32 *p_eir_uuid, UINT16 uuid16 ); 4379 4380 /******************************************************************************* 4381 ** 4382 ** Function BTM_GetEirSupportedServices 4383 ** 4384 ** Description This function is called to get UUID list from bit map of UUID list. 4385 ** 4386 ** Parameters p_eir_uuid - bit mask of UUID list for EIR 4387 ** p - reference of current pointer of EIR 4388 ** max_num_uuid16 - max number of UUID can be written in EIR 4389 ** num_uuid16 - number of UUID have been written in EIR 4390 ** 4391 ** Returns BTM_EIR_MORE_16BITS_UUID_TYPE, if it has more than max 4392 ** BTM_EIR_COMPLETE_16BITS_UUID_TYPE, otherwise 4393 ** 4394 *******************************************************************************/ 4395 BTM_API extern UINT8 BTM_GetEirSupportedServices( UINT32 *p_eir_uuid, UINT8 **p, 4396 UINT8 max_num_uuid16, UINT8 *p_num_uuid16); 4397 4398 /******************************************************************************* 4399 ** 4400 ** Function BTM_GetEirUuidList 4401 ** 4402 ** Description This function parses EIR and returns UUID list. 4403 ** 4404 ** Parameters p_eir - EIR 4405 ** uuid_size - LEN_UUID_16, LEN_UUID_32, LEN_UUID_128 4406 ** p_num_uuid - return number of UUID in found list 4407 ** p_uuid_list - return UUID 16-bit list 4408 ** max_num_uuid - maximum number of UUID to be returned 4409 ** 4410 ** Returns 0 - if not found 4411 ** BTM_EIR_COMPLETE_16BITS_UUID_TYPE 4412 ** BTM_EIR_MORE_16BITS_UUID_TYPE 4413 ** BTM_EIR_COMPLETE_32BITS_UUID_TYPE 4414 ** BTM_EIR_MORE_32BITS_UUID_TYPE 4415 ** BTM_EIR_COMPLETE_128BITS_UUID_TYPE 4416 ** BTM_EIR_MORE_128BITS_UUID_TYPE 4417 ** 4418 *******************************************************************************/ 4419 BTM_API extern UINT8 BTM_GetEirUuidList( UINT8 *p_eir, UINT8 uuid_size, UINT8 *p_num_uuid, 4420 UINT8 *p_uuid_list, UINT8 max_num_uuid); 4421 4422 /******************************************************************************* 4423 ** 4424 ** Function BTM_SyncStack 4425 ** 4426 ** Description For Dual-Stack support. Called to initiate switching to/from 4427 ** main stack (running on phone baseband) to mm stack (light 4428 ** stack running on multi-media chip) 4429 ** 4430 ** Parameters sync_dir: BTM_SW_BB_TO_MM: switch from BB to MM stack 4431 ** BTM_SW_MM_TO_BB: switch from MM to BB stack 4432 ** BTM_SW_RESYNC: resync MM and BB stacks 4433 ** 4434 ** p_sync_cback: callback function for event notification 4435 ** Returns 4436 ** 4437 *******************************************************************************/ 4438 BTM_API extern tBTM_STATUS BTM_SyncStack(tBTM_SW_DIR sync_dir, tBTM_SYNC_STACK_CBACK p_sync_cback); 4439 4440 /******************************************************************************* 4441 ** 4442 ** Function BTM_SyncBtaRsp 4443 ** 4444 ** Description For Dual-Stack support. Called to indicate that upper layers 4445 ** (e.g. BTA or application) have completed synchronizing bta/app 4446 ** specific layers for switching. 4447 ** 4448 ** Called in response to 'BTM_SYNC_BTA_EVT' 4449 ** 4450 ** Parameters status: BTM_SUCESS: bta/app successfully synchronized 4451 ** otherwise: sync was unsuccessfule. Abort switch. 4452 ** 4453 ** p_btm_sync_info: information from bta/app that will be needed 4454 ** by BTE (avdt and l2cap) for switching. 4455 ** 4456 ** Returns void 4457 ** 4458 *******************************************************************************/ 4459 BTM_API extern void BTM_SyncBtaRsp(tBTM_STATUS status, tBTM_SYNC_INFO *p_btm_sync_info); 4460 4461 /******************************************************************************* 4462 ** 4463 ** Function BTM_OpenUIPC 4464 ** 4465 ** Description For Dual-Stack support. Called to open UIPC between 4466 ** main stack (running on phone baseband) to embedded light stack 4467 ** (running on Multimedia or Bluetooth Controller chip) 4468 ** 4469 ** Parameters sync_dir: BTM_SW_BB_TO_MM: switch from BB to MM stack 4470 ** BTM_SW_BB_TO_BTC:switch from BB to BTC stack 4471 ** 4472 ** p_sync_callback: callback function for event notification 4473 ** Returns 4474 ** 4475 *******************************************************************************/ 4476 BTM_API extern tBTM_STATUS BTM_OpenUIPC(tBTM_SW_DIR sync_dir, tBTM_SYNC_STACK_CBACK p_sync_callback); 4477 4478 /******************************************************************************* 4479 ** 4480 ** Function BTM_CloseUIPC 4481 ** 4482 ** Description For Dual-Stack support. Called to close UIPC between 4483 ** main stack (running on phone baseband) to embedded light stack 4484 ** (running on Multimedia or Bluetooth Controller chip) 4485 ** 4486 ** Parameters 4487 ** p_sync_callback: callback function for event notification 4488 ** Returns 4489 ** 4490 *******************************************************************************/ 4491 BTM_API extern tBTM_STATUS BTM_CloseUIPC(tBTM_SYNC_STACK_CBACK p_sync_callback); 4492 4493 /******************************************************************************* 4494 ** 4495 ** Function BTM_IpcSend 4496 ** 4497 ** Description For Dual-Stack support. Called to send ipc messages from 4498 ** full stack to lite stack and vice-versa. This API is 4499 ** typically called by bta layers e.g. bta_av. 4500 ** 4501 ** 4502 ** Parameters len: Length of the buffer in the ipc message 4503 ** 4504 ** buffer: Pointer to the buffer to be passed in the IPC message 4505 ** 4506 ** Returns void 4507 ** 4508 *******************************************************************************/ 4509 BTM_API extern void BTM_IpcSend(UINT16 len, UINT8* buffer); 4510 4511 /******************************************************************************* 4512 ** 4513 ** Function BTM_IpcSendBuf 4514 ** 4515 ** Description For Dual-Stack support. Called to send ipc messages from 4516 ** full stack to lite stack and vice-versa. This API is 4517 ** typically called by bta layers e.g. bta_av_sync. 4518 ** 4519 ** 4520 ** Parameters p_buf: Pointer to the buffer to be passed in the IPC message 4521 ** 4522 ** Returns void 4523 ** 4524 *******************************************************************************/ 4525 BTM_API extern void BTM_IpcSendBuf(BT_HDR* p_buf); 4526 4527 /******************************************************************************* 4528 ** 4529 ** Function BTM_RegIpcEvtHandler 4530 ** 4531 ** Description registers the DM provided handler for IPC events 4532 ** 4533 ** 4534 ** Returns void 4535 ** 4536 *******************************************************************************/ 4537 BTM_API extern void BTM_RegIpcEvtHandler(tBTM_IPC_EVT_CBACK *p_cback); 4538 4539 /******************************************************************************* 4540 ** 4541 ** Function BTM_RegRTIpcEvtHandler 4542 ** 4543 ** Description registers the RT(Audio Routing) provided handler for IPC events 4544 ** 4545 ** 4546 ** Returns void 4547 ** 4548 *******************************************************************************/ 4549 BTM_API extern void BTM_RegRTIpcEvtHandler(tBTM_IPC_EVT_CBACK *p_cback); 4550 4551 /***************************************************************************** 4552 ** N2BT 4553 *****************************************************************************/ 4554 4555 /* Data callback for N2BT */ 4556 typedef void (tBTM_N2BT_DATA_CB) (BD_ADDR bd_addr, UINT16 handle, UINT8 *p_data, UINT16 datalen); 4557 4558 /******************************************************************************* 4559 ** 4560 ** Function BTM_N2BtAcquire 4561 ** 4562 ** Description Put controller into acquisition mode 4563 ** 4564 ** Returns void 4565 ** 4566 *******************************************************************************/ 4567 BTM_API extern void BTM_N2BtAcquire(BD_ADDR bd_addr, UINT16 timeout, 4568 UINT8 freq, UINT8 src_addrlen, UINT8 sensor_flags, 4569 UINT8 sensor_type, UINT8 sensor_clk_accuracy, 4570 UINT16 add_rx_window, UINT16 init_crc, 4571 UINT32 ac_low, UINT32 ac_high, UINT16 pkt_hdr, 4572 UINT16 list_dur, UINT16 list_int, 4573 UINT8 oor_missed_pkts, tBTM_VSC_CMPL_CB *p_cb, 4574 tBTM_N2BT_DATA_CB *p_data_cback); 4575 4576 /******************************************************************************* 4577 ** 4578 ** Function BTM_N2BtDisconnect 4579 ** 4580 ** Description Disconnects all N2BT devices 4581 ** 4582 ** Returns void 4583 ** 4584 *******************************************************************************/ 4585 BTM_API extern void BTM_N2BtDisconnect(void); 4586 4587 /***************************************************************************** 4588 ** SCO OVER HCI 4589 *****************************************************************************/ 4590 /******************************************************************************* 4591 ** 4592 ** Function BTM_ConfigScoPath 4593 ** 4594 ** Description This function enable/disable SCO over HCI and registers SCO 4595 ** data callback if SCO over HCI is enabled. 4596 ** 4597 ** Parameter path: SCO or HCI 4598 ** p_sco_data_cb: callback function or SCO data if path is set 4599 ** to transport. 4600 ** p_pcm_param: pointer to the PCM interface parameter. If a NULL 4601 ** pointer is used, PCM parameter maintained in 4602 ** the control block will be used; otherwise update 4603 ** control block value. 4604 ** err_data_rpt: Lisbon feature to enable the erronous data report 4605 ** or not. 4606 ** 4607 ** Returns BTM_SUCCESS if the successful. 4608 ** BTM_NO_RESOURCES: no rsource to start the command. 4609 ** BTM_ILLEGAL_VALUE: invalid callback function pointer. 4610 ** BTM_CMD_STARTED :Command sent. Waiting for command cmpl event. 4611 ** 4612 ** 4613 *******************************************************************************/ 4614 BTM_API extern tBTM_STATUS BTM_ConfigScoPath (tBTM_SCO_ROUTE_TYPE path, 4615 tBTM_SCO_DATA_CB *p_sco_data_cb, 4616 tBTM_SCO_PCM_PARAM *p_pcm_param, 4617 BOOLEAN err_data_rpt); 4618 4619 /******************************************************************************* 4620 ** 4621 ** Function BTM_WriteScoData 4622 ** 4623 ** Description This function write SCO data to a specified instance. The data 4624 ** to be written p_buf needs to carry an offset of 4625 ** HCI_SCO_PREAMBLE_SIZE bytes, and the data length can not 4626 ** exceed BTM_SCO_DATA_SIZE_MAX bytes, whose default value is set 4627 ** to 60 and is configurable. Data longer than the maximum bytes 4628 ** will be truncated. 4629 ** 4630 ** Returns BTM_SUCCESS: data write is successful 4631 ** BTM_ILLEGAL_VALUE: SCO data contains illegal offset value. 4632 ** BTM_SCO_BAD_LENGTH: SCO data length exceeds the max SCO packet 4633 ** size. 4634 ** BTM_NO_RESOURCES: no resources. 4635 ** BTM_UNKNOWN_ADDR: unknown SCO connection handle, or SCO is not 4636 ** routed via HCI. 4637 ** 4638 ** 4639 *******************************************************************************/ 4640 BTM_API extern tBTM_STATUS BTM_WriteScoData (UINT16 sco_inx, BT_HDR *p_buf); 4641 4642 /******************************************************************************* 4643 ** 4644 ** Function BTM_SetARCMode 4645 ** 4646 ** Description Send Audio Routing Control command. 4647 ** 4648 ** Returns void 4649 ** 4650 *******************************************************************************/ 4651 BTM_API extern void BTM_SetARCMode (UINT8 iface, UINT8 arc_mode, tBTM_VSC_CMPL_CB *p_arc_cb); 4652 4653 4654 /******************************************************************************* 4655 ** 4656 ** Function BTM_PCM2Setup_Write 4657 ** 4658 ** Description Send PCM2_Setup write command. 4659 ** 4660 ** Returns void 4661 ** 4662 *******************************************************************************/ 4663 BTM_API extern void BTM_PCM2Setup_Write (BOOLEAN clk_master, tBTM_VSC_CMPL_CB *p_arc_cb); 4664 4665 #ifdef __cplusplus 4666 } 4667 #endif 4668 4669 #endif /* BTM_API_H */ 4670