/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ /* * The contents of this file are subject to the Mozilla Public * License Version 1.1 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or * implied. See the License for the specific language governing * rights and limitations under the License. * * The Original Code is the Netscape Portable Runtime (NSPR). * * The Initial Developer of the Original Code is Netscape * Communications Corporation. Portions created by Netscape are * Copyright (C) 1998-2000 Netscape Communications Corporation. All * Rights Reserved. * * Contributor(s): * * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License Version 2 or later (the * "GPL"), in which case the provisions of the GPL are applicable * instead of those above. If you wish to allow use of your * version of this file only under the terms of the GPL and not to * allow others to use your version of this file under the MPL, * indicate your decision by deleting the provisions above and * replace them with the notice and other provisions required by * the GPL. If you do not delete the provisions above, a recipient * may use your version of this file under either the MPL or the * GPL. */ /* * File: prio.h * * Description: PR i/o related stuff, such as file system access, file * i/o, socket i/o, etc. */ #ifndef prio_h___ #define prio_h___ #include "prlong.h" #include "prtime.h" #include "prinrval.h" #include "prinet.h" PR_BEGIN_EXTERN_C /* Typedefs */ typedef struct PRDir PRDir; typedef struct PRDirEntry PRDirEntry; #ifdef MOZ_UNICODE typedef struct PRDirUTF16 PRDirUTF16; typedef struct PRDirEntryUTF16 PRDirEntryUTF16; #endif /* MOZ_UNICODE */ typedef struct PRFileDesc PRFileDesc; typedef struct PRFileInfo PRFileInfo; typedef struct PRFileInfo64 PRFileInfo64; typedef union PRNetAddr PRNetAddr; typedef struct PRIOMethods PRIOMethods; typedef struct PRPollDesc PRPollDesc; typedef struct PRFilePrivate PRFilePrivate; typedef struct PRSendFileData PRSendFileData; /* *************************************************************************** ** The file descriptor. ** This is the primary structure to represent any active open socket, ** whether it be a normal file or a network connection. Such objects ** are stackable (or layerable). Each layer may have its own set of ** method pointers and context private to that layer. All each layer ** knows about its neighbors is how to get to their method table. *************************************************************************** */ typedef PRIntn PRDescIdentity; /* see: Layering file descriptors */ struct PRFileDesc { const PRIOMethods *methods; /* the I/O methods table */ PRFilePrivate *secret; /* layer dependent data */ PRFileDesc *lower, *higher; /* pointers to adjacent layers */ void (PR_CALLBACK *dtor)(PRFileDesc *fd); /* A destructor function for layer */ PRDescIdentity identity; /* Identity of this particular layer */ }; /* *************************************************************************** ** PRTransmitFileFlags ** ** Flags for PR_TransmitFile. Pass PR_TRANSMITFILE_CLOSE_SOCKET to ** PR_TransmitFile if the connection should be closed after the file ** is transmitted. *************************************************************************** */ typedef enum PRTransmitFileFlags { PR_TRANSMITFILE_KEEP_OPEN = 0, /* socket is left open after file * is transmitted. */ PR_TRANSMITFILE_CLOSE_SOCKET = 1 /* socket is closed after file * is transmitted. */ } PRTransmitFileFlags; /* ************************************************************************** ** Macros for PRNetAddr ** ** Address families: PR_AF_INET, PR_AF_INET6, PR_AF_LOCAL ** IP addresses: PR_INADDR_ANY, PR_INADDR_LOOPBACK, PR_INADDR_BROADCAST ************************************************************************** */ #ifdef WIN32 #define PR_AF_INET 2 #define PR_AF_LOCAL 1 #define PR_INADDR_ANY (unsigned long)0x00000000 #define PR_INADDR_LOOPBACK 0x7f000001 #define PR_INADDR_BROADCAST (unsigned long)0xffffffff #else /* WIN32 */ #define PR_AF_INET AF_INET #define PR_AF_LOCAL AF_UNIX #define PR_INADDR_ANY INADDR_ANY #define PR_INADDR_LOOPBACK INADDR_LOOPBACK #define PR_INADDR_BROADCAST INADDR_BROADCAST #endif /* WIN32 */ /* ** Define PR_AF_INET6 in prcpucfg.h with the same ** value as AF_INET6 on platforms with IPv6 support. ** Otherwise define it here. */ #ifndef PR_AF_INET6 #define PR_AF_INET6 100 #endif #ifndef PR_AF_UNSPEC #define PR_AF_UNSPEC 0 #endif /* ************************************************************************** ** A network address ** ** Only Internet Protocol (IPv4 and IPv6) addresses are supported. ** The address family must always represent IPv4 (AF_INET, probably == 2) ** or IPv6 (AF_INET6). ************************************************************************** *************************************************************************/ struct PRIPv6Addr { union { PRUint8 _S6_u8[16]; PRUint16 _S6_u16[8]; PRUint32 _S6_u32[4]; PRUint64 _S6_u64[2]; } _S6_un; }; #define pr_s6_addr _S6_un._S6_u8 #define pr_s6_addr16 _S6_un._S6_u16 #define pr_s6_addr32 _S6_un._S6_u32 #define pr_s6_addr64 _S6_un._S6_u64 typedef struct PRIPv6Addr PRIPv6Addr; union PRNetAddr { struct { PRUint16 family; /* address family (0x00ff maskable) */ #ifdef XP_BEOS char data[10]; /* Be has a smaller structure */ #else char data[14]; /* raw address data */ #endif } raw; struct { PRUint16 family; /* address family (AF_INET) */ PRUint16 port; /* port number */ PRUint32 ip; /* The actual 32 bits of address */ #ifdef XP_BEOS char pad[4]; /* Be has a smaller structure */ #else char pad[8]; #endif } inet; struct { PRUint16 family; /* address family (AF_INET6) */ PRUint16 port; /* port number */ PRUint32 flowinfo; /* routing information */ PRIPv6Addr ip; /* the actual 128 bits of address */ PRUint32 scope_id; /* set of interfaces for a scope */ } ipv6; #if defined(XP_UNIX) || defined(XP_OS2) struct { /* Unix domain socket address */ PRUint16 family; /* address family (AF_UNIX) */ #ifdef XP_OS2 char path[108]; /* null-terminated pathname */ /* bind fails if size is not 108. */ #else char path[104]; /* null-terminated pathname */ #endif } local; #endif }; /* *************************************************************************** ** PRSockOption ** ** The file descriptors can have predefined options set after they file ** descriptor is created to change their behavior. Only the options in ** the following enumeration are supported. *************************************************************************** */ typedef enum PRSockOption { PR_SockOpt_Nonblocking, /* nonblocking io */ PR_SockOpt_Linger, /* linger on close if data present */ PR_SockOpt_Reuseaddr, /* allow local address reuse */ PR_SockOpt_Keepalive, /* keep connections alive */ PR_SockOpt_RecvBufferSize, /* send buffer size */ PR_SockOpt_SendBufferSize, /* receive buffer size */ PR_SockOpt_IpTimeToLive, /* time to live */ PR_SockOpt_IpTypeOfService, /* type of service and precedence */ PR_SockOpt_AddMember, /* add an IP group membership */ PR_SockOpt_DropMember, /* drop an IP group membership */ PR_SockOpt_McastInterface, /* multicast interface address */ PR_SockOpt_McastTimeToLive, /* multicast timetolive */ PR_SockOpt_McastLoopback, /* multicast loopback */ PR_SockOpt_NoDelay, /* don't delay send to coalesce packets */ PR_SockOpt_MaxSegment, /* maximum segment size */ PR_SockOpt_Broadcast, /* enable broadcast */ PR_SockOpt_Last } PRSockOption; typedef struct PRLinger { PRBool polarity; /* Polarity of the option's setting */ PRIntervalTime linger; /* Time to linger before closing */ } PRLinger; typedef struct PRMcastRequest { PRNetAddr mcaddr; /* IP multicast address of group */ PRNetAddr ifaddr; /* local IP address of interface */ } PRMcastRequest; typedef struct PRSocketOptionData { PRSockOption option; union { PRUintn ip_ttl; /* IP time to live */ PRUintn mcast_ttl; /* IP multicast time to live */ PRUintn tos; /* IP type of service and precedence */ PRBool non_blocking; /* Non-blocking (network) I/O */ PRBool reuse_addr; /* Allow local address reuse */ PRBool keep_alive; /* Keep connections alive */ PRBool mcast_loopback; /* IP multicast loopback */ PRBool no_delay; /* Don't delay send to coalesce packets */ PRBool broadcast; /* Enable broadcast */ PRSize max_segment; /* Maximum segment size */ PRSize recv_buffer_size; /* Receive buffer size */ PRSize send_buffer_size; /* Send buffer size */ PRLinger linger; /* Time to linger on close if data present */ PRMcastRequest add_member; /* add an IP group membership */ PRMcastRequest drop_member; /* Drop an IP group membership */ PRNetAddr mcast_if; /* multicast interface address */ } value; } PRSocketOptionData; /* *************************************************************************** ** PRIOVec ** ** The I/O vector is used by the write vector method to describe the areas ** that are affected by the ouput operation. *************************************************************************** */ typedef struct PRIOVec { char *iov_base; int iov_len; } PRIOVec; /* *************************************************************************** ** Discover what type of socket is being described by the file descriptor. *************************************************************************** */ typedef enum PRDescType { PR_DESC_FILE = 1, PR_DESC_SOCKET_TCP = 2, PR_DESC_SOCKET_UDP = 3, PR_DESC_LAYERED = 4, PR_DESC_PIPE = 5 } PRDescType; typedef enum PRSeekWhence { PR_SEEK_SET = 0, PR_SEEK_CUR = 1, PR_SEEK_END = 2 } PRSeekWhence; NSPR_API(PRDescType) PR_GetDescType(PRFileDesc *file); /* *************************************************************************** ** PRIOMethods ** ** The I/O methods table provides procedural access to the functions of ** the file descriptor. It is the responsibility of a layer implementor ** to provide suitable functions at every entry point. If a layer provides ** no functionality, it should call the next lower(higher) function of the ** same name (e.g., return fd->lower->method->close(fd->lower)); ** ** Not all functions are implemented for all types of files. In cases where ** that is true, the function will return a error indication with an error ** code of PR_INVALID_METHOD_ERROR. *************************************************************************** */ typedef PRStatus (PR_CALLBACK *PRCloseFN)(PRFileDesc *fd); typedef PRInt32 (PR_CALLBACK *PRReadFN)(PRFileDesc *fd, void *buf, PRInt32 amount); typedef PRInt32 (PR_CALLBACK *PRWriteFN)(PRFileDesc *fd, const void *buf, PRInt32 amount); typedef PRInt32 (PR_CALLBACK *PRAvailableFN)(PRFileDesc *fd); typedef PRInt64 (PR_CALLBACK *PRAvailable64FN)(PRFileDesc *fd); typedef PRStatus (PR_CALLBACK *PRFsyncFN)(PRFileDesc *fd); typedef PROffset32 (PR_CALLBACK *PRSeekFN)(PRFileDesc *fd, PROffset32 offset, PRSeekWhence how); typedef PROffset64 (PR_CALLBACK *PRSeek64FN)(PRFileDesc *fd, PROffset64 offset, PRSeekWhence how); typedef PRStatus (PR_CALLBACK *PRFileInfoFN)(PRFileDesc *fd, PRFileInfo *info); typedef PRStatus (PR_CALLBACK *PRFileInfo64FN)(PRFileDesc *fd, PRFileInfo64 *info); typedef PRInt32 (PR_CALLBACK *PRWritevFN)( PRFileDesc *fd, const PRIOVec *iov, PRInt32 iov_size, PRIntervalTime timeout); typedef PRStatus (PR_CALLBACK *PRConnectFN)( PRFileDesc *fd, const PRNetAddr *addr, PRIntervalTime timeout); typedef PRFileDesc* (PR_CALLBACK *PRAcceptFN) ( PRFileDesc *fd, PRNetAddr *addr, PRIntervalTime timeout); typedef PRStatus (PR_CALLBACK *PRBindFN)(PRFileDesc *fd, const PRNetAddr *addr); typedef PRStatus (PR_CALLBACK *PRListenFN)(PRFileDesc *fd, PRIntn backlog); typedef PRStatus (PR_CALLBACK *PRShutdownFN)(PRFileDesc *fd, PRIntn how); typedef PRInt32 (PR_CALLBACK *PRRecvFN)( PRFileDesc *fd, void *buf, PRInt32 amount, PRIntn flags, PRIntervalTime timeout); typedef PRInt32 (PR_CALLBACK *PRSendFN) ( PRFileDesc *fd, const void *buf, PRInt32 amount, PRIntn flags, PRIntervalTime timeout); typedef PRInt32 (PR_CALLBACK *PRRecvfromFN)( PRFileDesc *fd, void *buf, PRInt32 amount, PRIntn flags, PRNetAddr *addr, PRIntervalTime timeout); typedef PRInt32 (PR_CALLBACK *PRSendtoFN)( PRFileDesc *fd, const void *buf, PRInt32 amount, PRIntn flags, const PRNetAddr *addr, PRIntervalTime timeout); typedef PRInt16 (PR_CALLBACK *PRPollFN)( PRFileDesc *fd, PRInt16 in_flags, PRInt16 *out_flags); typedef PRInt32 (PR_CALLBACK *PRAcceptreadFN)( PRFileDesc *sd, PRFileDesc **nd, PRNetAddr **raddr, void *buf, PRInt32 amount, PRIntervalTime t); typedef PRInt32 (PR_CALLBACK *PRTransmitfileFN)( PRFileDesc *sd, PRFileDesc *fd, const void *headers, PRInt32 hlen, PRTransmitFileFlags flags, PRIntervalTime t); typedef PRStatus (PR_CALLBACK *PRGetsocknameFN)(PRFileDesc *fd, PRNetAddr *addr); typedef PRStatus (PR_CALLBACK *PRGetpeernameFN)(PRFileDesc *fd, PRNetAddr *addr); typedef PRStatus (PR_CALLBACK *PRGetsocketoptionFN)( PRFileDesc *fd, PRSocketOptionData *data); typedef PRStatus (PR_CALLBACK *PRSetsocketoptionFN)( PRFileDesc *fd, const PRSocketOptionData *data); typedef PRInt32 (PR_CALLBACK *PRSendfileFN)( PRFileDesc *networkSocket, PRSendFileData *sendData, PRTransmitFileFlags flags, PRIntervalTime timeout); typedef PRStatus (PR_CALLBACK *PRConnectcontinueFN)( PRFileDesc *fd, PRInt16 out_flags); typedef PRIntn (PR_CALLBACK *PRReservedFN)(PRFileDesc *fd); struct PRIOMethods { PRDescType file_type; /* Type of file represented (tos) */ PRCloseFN close; /* close file and destroy descriptor */ PRReadFN read; /* read up to specified bytes into buffer */ PRWriteFN write; /* write specified bytes from buffer */ PRAvailableFN available; /* determine number of bytes available */ PRAvailable64FN available64; /* ditto, 64 bit */ PRFsyncFN fsync; /* flush all buffers to permanent store */ PRSeekFN seek; /* position the file to the desired place */ PRSeek64FN seek64; /* ditto, 64 bit */ PRFileInfoFN fileInfo; /* Get information about an open file */ PRFileInfo64FN fileInfo64; /* ditto, 64 bit */ PRWritevFN writev; /* Write segments as described by iovector */ PRConnectFN connect; /* Connect to the specified (net) address */ PRAcceptFN accept; /* Accept a connection for a (net) peer */ PRBindFN bind; /* Associate a (net) address with the fd */ PRListenFN listen; /* Prepare to listen for (net) connections */ PRShutdownFN shutdown; /* Shutdown a (net) connection */ PRRecvFN recv; /* Solicit up the the specified bytes */ PRSendFN send; /* Send all the bytes specified */ PRRecvfromFN recvfrom; /* Solicit (net) bytes and report source */ PRSendtoFN sendto; /* Send bytes to (net) address specified */ PRPollFN poll; /* Test the fd to see if it is ready */ PRAcceptreadFN acceptread; /* Accept and read on a new (net) fd */ PRTransmitfileFN transmitfile; /* Transmit at entire file */ PRGetsocknameFN getsockname; /* Get (net) address associated with fd */ PRGetpeernameFN getpeername; /* Get peer's (net) address */ PRReservedFN reserved_fn_6; /* reserved for future use */ PRReservedFN reserved_fn_5; /* reserved for future use */ PRGetsocketoptionFN getsocketoption; /* Get current setting of specified option */ PRSetsocketoptionFN setsocketoption; /* Set value of specified option */ PRSendfileFN sendfile; /* Send a (partial) file with header/trailer*/ PRConnectcontinueFN connectcontinue; /* Continue a nonblocking connect */ PRReservedFN reserved_fn_3; /* reserved for future use */ PRReservedFN reserved_fn_2; /* reserved for future use */ PRReservedFN reserved_fn_1; /* reserved for future use */ PRReservedFN reserved_fn_0; /* reserved for future use */ }; /* ************************************************************************** * FUNCTION: PR_GetSpecialFD * DESCRIPTION: Get the file descriptor that represents the standard input, * output, or error stream. * INPUTS: * PRSpecialFD id * A value indicating the type of stream desired: * PR_StandardInput: standard input * PR_StandardOuput: standard output * PR_StandardError: standard error * OUTPUTS: none * RETURNS: PRFileDesc * * If the argument is valid, PR_GetSpecialFD returns a file descriptor * that represents the corresponding standard I/O stream. Otherwise, * PR_GetSpecialFD returns NULL and sets error PR_INVALID_ARGUMENT_ERROR. ************************************************************************** */ typedef enum PRSpecialFD { PR_StandardInput, /* standard input */ PR_StandardOutput, /* standard output */ PR_StandardError /* standard error */ } PRSpecialFD; NSPR_API(PRFileDesc*) PR_GetSpecialFD(PRSpecialFD id); #define PR_STDIN PR_GetSpecialFD(PR_StandardInput) #define PR_STDOUT PR_GetSpecialFD(PR_StandardOutput) #define PR_STDERR PR_GetSpecialFD(PR_StandardError) /* ************************************************************************** * Layering file descriptors * * File descriptors may be layered. Each layer has it's own identity. * Identities are allocated by the runtime and are to be associated * (by the layer implementor) with all layers that are of that type. * It is then possible to scan the chain of layers and find a layer * that one recongizes and therefore predict that it will implement * a desired protocol. * * There are three well-known identities: * PR_INVALID_IO_LAYER => an invalid layer identity, for error return * PR_TOP_IO_LAYER => the identity of the top of the stack * PR_NSPR_IO_LAYER => the identity used by NSPR proper * PR_TOP_IO_LAYER may be used as a shorthand for identifying the topmost * layer of an existing stack. Ie., the following two constructs are * equivalent. * * rv = PR_PushIOLayer(stack, PR_TOP_IO_LAYER, my_layer); * rv = PR_PushIOLayer(stack, PR_GetLayersIdentity(stack), my_layer) * * A string may be associated with the creation of the identity. It * will be copied by the runtime. If queried the runtime will return * a reference to that copied string (not yet another copy). There * is no facility for deleting an identity. ************************************************************************** */ #define PR_IO_LAYER_HEAD (PRDescIdentity)-3 #define PR_INVALID_IO_LAYER (PRDescIdentity)-1 #define PR_TOP_IO_LAYER (PRDescIdentity)-2 #define PR_NSPR_IO_LAYER (PRDescIdentity)0 NSPR_API(PRDescIdentity) PR_GetUniqueIdentity(const char *layer_name); NSPR_API(const char*) PR_GetNameForIdentity(PRDescIdentity ident); NSPR_API(PRDescIdentity) PR_GetLayersIdentity(PRFileDesc* fd); NSPR_API(PRFileDesc*) PR_GetIdentitiesLayer(PRFileDesc* fd_stack, PRDescIdentity id); /* ************************************************************************** * PR_GetDefaultIOMethods: Accessing the default methods table. * You may get a pointer to the default methods table by calling this function. * You may then select any elements from that table with which to build your * layer's methods table. You may NOT modify the table directly. ************************************************************************** */ NSPR_API(const PRIOMethods *) PR_GetDefaultIOMethods(void); /* ************************************************************************** * Creating a layer * * A new layer may be allocated by calling PR_CreateIOLayerStub(). The * file descriptor returned will contain the pointer to the methods table * provided. The runtime will not modify the table nor test its correctness. ************************************************************************** */ NSPR_API(PRFileDesc*) PR_CreateIOLayerStub( PRDescIdentity ident, const PRIOMethods *methods); /* ************************************************************************** * Creating a layer * * A new stack may be created by calling PR_CreateIOLayer(). The * file descriptor returned will point to the top of the stack, which has * the layer 'fd' as the topmost layer. * * NOTE: This function creates a new style stack, which has a fixed, dummy * header. The old style stack, created by a call to PR_PushIOLayer, * results in modifying contents of the top layer of the stack, when * pushing and popping layers of the stack. ************************************************************************** */ NSPR_API(PRFileDesc*) PR_CreateIOLayer(PRFileDesc* fd); /* ************************************************************************** * Pushing a layer * * A file descriptor (perhaps allocated using PR_CreateIOLayerStub()) may * be pushed into an existing stack of file descriptors at any point the * caller deems appropriate. The new layer will be inserted into the stack * just above the layer with the indicated identity. * * Note: Even if the identity parameter indicates the top-most layer of * the stack, the value of the file descriptor describing the original * stack will not change. ************************************************************************** */ NSPR_API(PRStatus) PR_PushIOLayer( PRFileDesc *fd_stack, PRDescIdentity id, PRFileDesc *layer); /* ************************************************************************** * Popping a layer * * A layer may be popped from a stack by indicating the identity of the * layer to be removed. If found, a pointer to the removed object will * be returned to the caller. The object then becomes the responsibility * of the caller. * * Note: Even if the identity indicates the top layer of the stack, the * reference returned will not be the file descriptor for the stack and * that file descriptor will remain valid. ************************************************************************** */ NSPR_API(PRFileDesc*) PR_PopIOLayer(PRFileDesc *fd_stack, PRDescIdentity id); /* ************************************************************************** * FUNCTION: PR_Open * DESCRIPTION: Open a file for reading, writing, or both. * INPUTS: * const char *name * The path name of the file to be opened * PRIntn flags * The file status flags. * It is a bitwise OR of the following bit flags (only one of * the first three flags below may be used): * PR_RDONLY Open for reading only. * PR_WRONLY Open for writing only. * PR_RDWR Open for reading and writing. * PR_CREATE_FILE If the file does not exist, the file is created * If the file exists, this flag has no effect. * PR_SYNC If set, each write will wait for both the file data * and file status to be physically updated. * PR_APPEND The file pointer is set to the end of * the file prior to each write. * PR_TRUNCATE If the file exists, its length is truncated to 0. * PR_EXCL With PR_CREATE_FILE, if the file does not exist, * the file is created. If the file already * exists, no action and NULL is returned * * PRIntn mode * The access permission bits of the file mode, if the file is * created when PR_CREATE_FILE is on. * OUTPUTS: None * RETURNS: PRFileDesc * * If the file is successfully opened, * returns a pointer to the PRFileDesc * created for the newly opened file. * Returns a NULL pointer if the open * failed. * SIDE EFFECTS: * RESTRICTIONS: * MEMORY: * The return value, if not NULL, points to a dynamically allocated * PRFileDesc object. * ALGORITHM: ************************************************************************** */ /* Open flags */ #define PR_RDONLY 0x01 #define PR_WRONLY 0x02 #define PR_RDWR 0x04 #define PR_CREATE_FILE 0x08 #define PR_APPEND 0x10 #define PR_TRUNCATE 0x20 #define PR_SYNC 0x40 #define PR_EXCL 0x80 /* ** File modes .... ** ** CAVEAT: 'mode' is currently only applicable on UNIX platforms. ** The 'mode' argument may be ignored by PR_Open on other platforms. ** ** 00400 Read by owner. ** 00200 Write by owner. ** 00100 Execute (search if a directory) by owner. ** 00040 Read by group. ** 00020 Write by group. ** 00010 Execute by group. ** 00004 Read by others. ** 00002 Write by others ** 00001 Execute by others. ** */ NSPR_API(PRFileDesc*) PR_Open(const char *name, PRIntn flags, PRIntn mode); /* ************************************************************************** * FUNCTION: PR_OpenFile * DESCRIPTION: * Open a file for reading, writing, or both. * PR_OpenFile has the same prototype as PR_Open but implements * the specified file mode where possible. ************************************************************************** */ /* File mode bits */ #define PR_IRWXU 00700 /* read, write, execute/search by owner */ #define PR_IRUSR 00400 /* read permission, owner */ #define PR_IWUSR 00200 /* write permission, owner */ #define PR_IXUSR 00100 /* execute/search permission, owner */ #define PR_IRWXG 00070 /* read, write, execute/search by group */ #define PR_IRGRP 00040 /* read permission, group */ #define PR_IWGRP 00020 /* write permission, group */ #define PR_IXGRP 00010 /* execute/search permission, group */ #define PR_IRWXO 00007 /* read, write, execute/search by others */ #define PR_IROTH 00004 /* read permission, others */ #define PR_IWOTH 00002 /* write permission, others */ #define PR_IXOTH 00001 /* execute/search permission, others */ NSPR_API(PRFileDesc*) PR_OpenFile( const char *name, PRIntn flags, PRIntn mode); #ifdef MOZ_UNICODE /* * EXPERIMENTAL: This function may be removed in a future release. */ NSPR_API(PRFileDesc*) PR_OpenFileUTF16( const PRUnichar *name, PRIntn flags, PRIntn mode); #endif /* MOZ_UNICODE */ /* ************************************************************************** * FUNCTION: PR_Close * DESCRIPTION: * Close a file or socket. * INPUTS: * PRFileDesc *fd * a pointer to a PRFileDesc. * OUTPUTS: * None. * RETURN: * PRStatus * SIDE EFFECTS: * RESTRICTIONS: * None. * MEMORY: * The dynamic memory pointed to by the argument fd is freed. ************************************************************************** */ NSPR_API(PRStatus) PR_Close(PRFileDesc *fd); /* ************************************************************************** * FUNCTION: PR_Read * DESCRIPTION: * Read bytes from a file or socket. * The operation will block until either an end of stream indication is * encountered, some positive number of bytes are transferred, or there * is an error. No more than 'amount' bytes will be transferred. * INPUTS: * PRFileDesc *fd * pointer to the PRFileDesc object for the file or socket * void *buf * pointer to a buffer to hold the data read in. * PRInt32 amount * the size of 'buf' (in bytes) * OUTPUTS: * RETURN: * PRInt32 * a positive number indicates the number of bytes actually read in. * 0 means end of file is reached or the network connection is closed. * -1 indicates a failure. The reason for the failure is obtained * by calling PR_GetError(). * SIDE EFFECTS: * data is written into the buffer pointed to by 'buf'. * RESTRICTIONS: * None. * MEMORY: * N/A * ALGORITHM: * N/A ************************************************************************** */ NSPR_API(PRInt32) PR_Read(PRFileDesc *fd, void *buf, PRInt32 amount); /* *************************************************************************** * FUNCTION: PR_Write * DESCRIPTION: * Write a specified number of bytes to a file or socket. The thread * invoking this function blocks until all the data is written. * INPUTS: * PRFileDesc *fd * pointer to a PRFileDesc object that refers to a file or socket * const void *buf * pointer to the buffer holding the data * PRInt32 amount * amount of data in bytes to be written from the buffer * OUTPUTS: * None. * RETURN: PRInt32 * A positive number indicates the number of bytes successfully written. * A -1 is an indication that the operation failed. The reason * for the failure is obtained by calling PR_GetError(). *************************************************************************** */ NSPR_API(PRInt32) PR_Write(PRFileDesc *fd,const void *buf,PRInt32 amount); /* *************************************************************************** * FUNCTION: PR_Writev * DESCRIPTION: * Write data to a socket. The data is organized in a PRIOVec array. The * operation will block until all the data is written or the operation * fails. * INPUTS: * PRFileDesc *fd * Pointer that points to a PRFileDesc object for a socket. * const PRIOVec *iov * An array of PRIOVec. PRIOVec is a struct with the following * two fields: * char *iov_base; * int iov_len; * PRInt32 iov_size * Number of elements in the iov array. The value of this * argument must not be greater than PR_MAX_IOVECTOR_SIZE. * If it is, the method will fail (PR_BUFFER_OVERFLOW_ERROR). * PRIntervalTime timeout * Time limit for completion of the entire write operation. * OUTPUTS: * None * RETURN: * A positive number indicates the number of bytes successfully written. * A -1 is an indication that the operation failed. The reason * for the failure is obtained by calling PR_GetError(). *************************************************************************** */ #define PR_MAX_IOVECTOR_SIZE 16 /* 'iov_size' must be <= */ NSPR_API(PRInt32) PR_Writev( PRFileDesc *fd, const PRIOVec *iov, PRInt32 iov_size, PRIntervalTime timeout); /* *************************************************************************** * FUNCTION: PR_Delete * DESCRIPTION: * Delete a file from the filesystem. The operation may fail if the * file is open. * INPUTS: * const char *name * Path name of the file to be deleted. * OUTPUTS: * None. * RETURN: PRStatus * The function returns PR_SUCCESS if the file is successfully * deleted, otherwise it returns PR_FAILURE. *************************************************************************** */ NSPR_API(PRStatus) PR_Delete(const char *name); /**************************************************************************/ typedef enum PRFileType { PR_FILE_FILE = 1, PR_FILE_DIRECTORY = 2, PR_FILE_OTHER = 3 } PRFileType; struct PRFileInfo { PRFileType type; /* Type of file */ PROffset32 size; /* Size, in bytes, of file's contents */ PRTime creationTime; /* Creation time per definition of PRTime */ PRTime modifyTime; /* Last modification time per definition of PRTime */ }; struct PRFileInfo64 { PRFileType type; /* Type of file */ PROffset64 size; /* Size, in bytes, of file's contents */ PRTime creationTime; /* Creation time per definition of PRTime */ PRTime modifyTime; /* Last modification time per definition of PRTime */ }; /**************************************************************************** * FUNCTION: PR_GetFileInfo, PR_GetFileInfo64 * DESCRIPTION: * Get the information about the file with the given path name. This is * applicable only to NSFileDesc describing 'file' types (see * INPUTS: * const char *fn * path name of the file * OUTPUTS: * PRFileInfo *info * Information about the given file is written into the file * information object pointer to by 'info'. * RETURN: PRStatus * PR_GetFileInfo returns PR_SUCCESS if file information is successfully * obtained, otherwise it returns PR_FAILURE. *************************************************************************** */ NSPR_API(PRStatus) PR_GetFileInfo(const char *fn, PRFileInfo *info); NSPR_API(PRStatus) PR_GetFileInfo64(const char *fn, PRFileInfo64 *info); #ifdef MOZ_UNICODE /* * EXPERIMENTAL: This function may be removed in a future release. */ NSPR_API(PRStatus) PR_GetFileInfo64UTF16(const PRUnichar *fn, PRFileInfo64 *info); #endif /* MOZ_UNICODE */ /* ************************************************************************** * FUNCTION: PR_GetOpenFileInfo, PR_GetOpenFileInfo64 * DESCRIPTION: * Get information about an open file referred to by the * given PRFileDesc object. * INPUTS: * const PRFileDesc *fd * A reference to a valid, open file. * OUTPUTS: * Same as PR_GetFileInfo, PR_GetFileInfo64 * RETURN: PRStatus * PR_GetFileInfo returns PR_SUCCESS if file information is successfully * obtained, otherwise it returns PR_FAILURE. *************************************************************************** */ NSPR_API(PRStatus) PR_GetOpenFileInfo(PRFileDesc *fd, PRFileInfo *info); NSPR_API(PRStatus) PR_GetOpenFileInfo64(PRFileDesc *fd, PRFileInfo64 *info); /* ************************************************************************** * FUNCTION: PR_Rename * DESCRIPTION: * Rename a file from the old name 'from' to the new name 'to'. * INPUTS: * const char *from * The old name of the file to be renamed. * const char *to * The new name of the file. * OUTPUTS: * None. * RETURN: PRStatus ************************************************************************** */ NSPR_API(PRStatus) PR_Rename(const char *from, const char *to); /* ************************************************************************* * FUNCTION: PR_Access * DESCRIPTION: * Determine accessibility of a file. * INPUTS: * const char *name * path name of the file * PRAccessHow how * specifies which access permission to check for. * It can be one of the following values: * PR_ACCESS_READ_OK Test for read permission * PR_ACCESS_WRITE_OK Test for write permission * PR_ACCESS_EXISTS Check existence of file * OUTPUTS: * None. * RETURN: PRStatus * PR_SUCCESS is returned if the requested access is permitted. * Otherwise, PR_FAILURE is returned. Additional information * regarding the reason for the failure may be retrieved from * PR_GetError(). ************************************************************************* */ typedef enum PRAccessHow { PR_ACCESS_EXISTS = 1, PR_ACCESS_WRITE_OK = 2, PR_ACCESS_READ_OK = 3 } PRAccessHow; NSPR_API(PRStatus) PR_Access(const char *name, PRAccessHow how); /* ************************************************************************* * FUNCTION: PR_Seek, PR_Seek64 * DESCRIPTION: * Moves read-write file offset * INPUTS: * PRFileDesc *fd * Pointer to a PRFileDesc object. * PROffset32, PROffset64 offset * Specifies a value, in bytes, that is used in conjunction * with the 'whence' parameter to set the file pointer. A * negative value causes seeking in the reverse direction. * PRSeekWhence whence * Specifies how to interpret the 'offset' parameter in setting * the file pointer associated with the 'fd' parameter. * Values for the 'whence' parameter are: * PR_SEEK_SET Sets the file pointer to the value of the * 'offset' parameter * PR_SEEK_CUR Sets the file pointer to its current location * plus the value of the offset parameter. * PR_SEEK_END Sets the file pointer to the size of the * file plus the value of the offset parameter. * OUTPUTS: * None. * RETURN: PROffset32, PROffset64 * Upon successful completion, the resulting pointer location, * measured in bytes from the beginning of the file, is returned. * If the PR_Seek() function fails, the file offset remains * unchanged, and the returned value is -1. The error code can * then be retrieved via PR_GetError(). ************************************************************************* */ NSPR_API(PROffset32) PR_Seek(PRFileDesc *fd, PROffset32 offset, PRSeekWhence whence); NSPR_API(PROffset64) PR_Seek64(PRFileDesc *fd, PROffset64 offset, PRSeekWhence whence); /* ************************************************************************ * FUNCTION: PR_Available * DESCRIPTION: * Determine the amount of data in bytes available for reading * in the given file or socket. * INPUTS: * PRFileDesc *fd * Pointer to a PRFileDesc object that refers to a file or * socket. * OUTPUTS: * None * RETURN: PRInt32, PRInt64 * Upon successful completion, PR_Available returns the number of * bytes beyond the current read pointer that is available for * reading. Otherwise, it returns a -1 and the reason for the * failure can be retrieved via PR_GetError(). ************************************************************************ */ NSPR_API(PRInt32) PR_Available(PRFileDesc *fd); NSPR_API(PRInt64) PR_Available64(PRFileDesc *fd); /* ************************************************************************ * FUNCTION: PR_Sync * DESCRIPTION: * Sync any buffered data for a fd to its backing device (disk). * INPUTS: * PRFileDesc *fd * Pointer to a PRFileDesc object that refers to a file or * socket * OUTPUTS: * None * RETURN: PRStatus * PR_SUCCESS is returned if the requested access is permitted. * Otherwise, PR_FAILURE is returned. ************************************************************************ */ NSPR_API(PRStatus) PR_Sync(PRFileDesc *fd); /************************************************************************/ struct PRDirEntry { const char *name; /* name of entry, relative to directory name */ }; #ifdef MOZ_UNICODE struct PRDirEntryUTF16 { const PRUnichar *name; /* name of entry in UTF16, relative to * directory name */ }; #endif /* MOZ_UNICODE */ #if !defined(NO_NSPR_10_SUPPORT) #define PR_DirName(dirEntry) (dirEntry->name) #endif /* ************************************************************************* * FUNCTION: PR_OpenDir * DESCRIPTION: * Open the directory by the given name * INPUTS: * const char *name * path name of the directory to be opened * OUTPUTS: * None * RETURN: PRDir * * If the directory is sucessfully opened, a PRDir object is * dynamically allocated and a pointer to it is returned. * If the directory cannot be opened, a NULL pointer is returned. * MEMORY: * Upon successful completion, the return value points to * dynamically allocated memory. ************************************************************************* */ NSPR_API(PRDir*) PR_OpenDir(const char *name); #ifdef MOZ_UNICODE /* * EXPERIMENTAL: This function may be removed in a future release. */ NSPR_API(PRDirUTF16*) PR_OpenDirUTF16(const PRUnichar *name); #endif /* MOZ_UNICODE */ /* ************************************************************************* * FUNCTION: PR_ReadDir * DESCRIPTION: * INPUTS: * PRDir *dir * pointer to a PRDir object that designates an open directory * PRDirFlags flags * PR_SKIP_NONE Do not skip any files * PR_SKIP_DOT Skip the directory entry "." that * represents the current directory * PR_SKIP_DOT_DOT Skip the directory entry ".." that * represents the parent directory. * PR_SKIP_BOTH Skip both '.' and '..' * PR_SKIP_HIDDEN Skip hidden files * OUTPUTS: * RETURN: PRDirEntry* * Returns a pointer to the next entry in the directory. Returns * a NULL pointer upon reaching the end of the directory or when an * error occurs. The actual reason can be retrieved via PR_GetError(). ************************************************************************* */ typedef enum PRDirFlags { PR_SKIP_NONE = 0x0, PR_SKIP_DOT = 0x1, PR_SKIP_DOT_DOT = 0x2, PR_SKIP_BOTH = 0x3, PR_SKIP_HIDDEN = 0x4 } PRDirFlags; NSPR_API(PRDirEntry*) PR_ReadDir(PRDir *dir, PRDirFlags flags); #ifdef MOZ_UNICODE /* * EXPERIMENTAL: This function may be removed in a future release. */ NSPR_API(PRDirEntryUTF16*) PR_ReadDirUTF16(PRDirUTF16 *dir, PRDirFlags flags); #endif /* MOZ_UNICODE */ /* ************************************************************************* * FUNCTION: PR_CloseDir * DESCRIPTION: * Close the specified directory. * INPUTS: * PRDir *dir * The directory to be closed. * OUTPUTS: * None * RETURN: PRStatus * If successful, will return a status of PR_SUCCESS. Otherwise * a value of PR_FAILURE. The reason for the failure may be re- * trieved using PR_GetError(). ************************************************************************* */ NSPR_API(PRStatus) PR_CloseDir(PRDir *dir); #ifdef MOZ_UNICODE /* * EXPERIMENTAL: This function may be removed in a future release. */ NSPR_API(PRStatus) PR_CloseDirUTF16(PRDirUTF16 *dir); #endif /* MOZ_UNICODE */ /* ************************************************************************* * FUNCTION: PR_MkDir * DESCRIPTION: * Create a new directory with the given name and access mode. * INPUTS: * const char *name * The name of the directory to be created. All the path components * up to but not including the leaf component must already exist. * PRIntn mode * See 'mode' definiton in PR_Open(). * OUTPUTS: * None * RETURN: PRStatus * If successful, will return a status of PR_SUCCESS. Otherwise * a value of PR_FAILURE. The reason for the failure may be re- * trieved using PR_GetError(). ************************************************************************* */ NSPR_API(PRStatus) PR_MkDir(const char *name, PRIntn mode); /* ************************************************************************* * FUNCTION: PR_MakeDir * DESCRIPTION: * Create a new directory with the given name and access mode. * PR_MakeDir has the same prototype as PR_MkDir but implements * the specified access mode where possible. ************************************************************************* */ NSPR_API(PRStatus) PR_MakeDir(const char *name, PRIntn mode); /* ************************************************************************* * FUNCTION: PR_RmDir * DESCRIPTION: * Remove a directory by the given name. * INPUTS: * const char *name * The name of the directory to be removed. All the path components * must already exist. Only the leaf component will be removed. * OUTPUTS: * None * RETURN: PRStatus * If successful, will return a status of PR_SUCCESS. Otherwise * a value of PR_FAILURE. The reason for the failure may be re- * trieved using PR_GetError(). ************************************************************************** */ NSPR_API(PRStatus) PR_RmDir(const char *name); /* ************************************************************************* * FUNCTION: PR_NewUDPSocket * DESCRIPTION: * Create a new UDP socket. * INPUTS: * None * OUTPUTS: * None * RETURN: PRFileDesc* * Upon successful completion, PR_NewUDPSocket returns a pointer * to the PRFileDesc created for the newly opened UDP socket. * Returns a NULL pointer if the creation of a new UDP socket failed. * ************************************************************************** */ NSPR_API(PRFileDesc*) PR_NewUDPSocket(void); /* ************************************************************************* * FUNCTION: PR_NewTCPSocket * DESCRIPTION: * Create a new TCP socket. * INPUTS: * None * OUTPUTS: * None * RETURN: PRFileDesc* * Upon successful completion, PR_NewTCPSocket returns a pointer * to the PRFileDesc created for the newly opened TCP socket. * Returns a NULL pointer if the creation of a new TCP socket failed. * ************************************************************************** */ NSPR_API(PRFileDesc*) PR_NewTCPSocket(void); /* ************************************************************************* * FUNCTION: PR_OpenUDPSocket * DESCRIPTION: * Create a new UDP socket of the specified address family. * INPUTS: * PRIntn af * Address family * OUTPUTS: * None * RETURN: PRFileDesc* * Upon successful completion, PR_OpenUDPSocket returns a pointer * to the PRFileDesc created for the newly opened UDP socket. * Returns a NULL pointer if the creation of a new UDP socket failed. * ************************************************************************** */ NSPR_API(PRFileDesc*) PR_OpenUDPSocket(PRIntn af); /* ************************************************************************* * FUNCTION: PR_OpenTCPSocket * DESCRIPTION: * Create a new TCP socket of the specified address family. * INPUTS: * PRIntn af * Address family * OUTPUTS: * None * RETURN: PRFileDesc* * Upon successful completion, PR_NewTCPSocket returns a pointer * to the PRFileDesc created for the newly opened TCP socket. * Returns a NULL pointer if the creation of a new TCP socket failed. * ************************************************************************** */ NSPR_API(PRFileDesc*) PR_OpenTCPSocket(PRIntn af); /* ************************************************************************* * FUNCTION: PR_Connect * DESCRIPTION: * Initiate a connection on a socket. * INPUTS: * PRFileDesc *fd * Points to a PRFileDesc object representing a socket * PRNetAddr *addr * Specifies the address of the socket in its own communication * space. * PRIntervalTime timeout * Time limit for completion of the connect operation. * OUTPUTS: * None * RETURN: PRStatus * Upon successful completion of connection initiation, PR_Connect * returns PR_SUCCESS. Otherwise, it returns PR_FAILURE. Further * failure information can be obtained by calling PR_GetError(). ************************************************************************** */ NSPR_API(PRStatus) PR_Connect( PRFileDesc *fd, const PRNetAddr *addr, PRIntervalTime timeout); /* ************************************************************************* * FUNCTION: PR_ConnectContinue * DESCRIPTION: * Continue a nonblocking connect. After a nonblocking connect * is initiated with PR_Connect() (which fails with * PR_IN_PROGRESS_ERROR), one should call PR_Poll() on the socket, * with the in_flags PR_POLL_WRITE | PR_POLL_EXCEPT. When * PR_Poll() returns, one calls PR_ConnectContinue() on the * socket to determine whether the nonblocking connect has * completed or is still in progress. Repeat the PR_Poll(), * PR_ConnectContinue() sequence until the nonblocking connect * has completed. * INPUTS: * PRFileDesc *fd * the file descriptor representing a socket * PRInt16 out_flags * the out_flags field of the poll descriptor returned by * PR_Poll() * RETURN: PRStatus * If the nonblocking connect has successfully completed, * PR_ConnectContinue returns PR_SUCCESS. If PR_ConnectContinue() * returns PR_FAILURE, call PR_GetError(): * - PR_IN_PROGRESS_ERROR: the nonblocking connect is still in * progress and has not completed yet. The caller should poll * on the file descriptor for the in_flags * PR_POLL_WRITE|PR_POLL_EXCEPT and retry PR_ConnectContinue * later when PR_Poll() returns. * - Other errors: the nonblocking connect has failed with this * error code. */ NSPR_API(PRStatus) PR_ConnectContinue(PRFileDesc *fd, PRInt16 out_flags); /* ************************************************************************* * THIS FUNCTION IS DEPRECATED. USE PR_ConnectContinue INSTEAD. * * FUNCTION: PR_GetConnectStatus * DESCRIPTION: * Get the completion status of a nonblocking connect. After * a nonblocking connect is initiated with PR_Connect() (which * fails with PR_IN_PROGRESS_ERROR), one should call PR_Poll() * on the socket, with the in_flags PR_POLL_WRITE | PR_POLL_EXCEPT. * When PR_Poll() returns, one calls PR_GetConnectStatus on the * PRPollDesc structure to determine whether the nonblocking * connect has succeeded or failed. * INPUTS: * const PRPollDesc *pd * Pointer to a PRPollDesc whose fd member is the socket, * and in_flags must contain PR_POLL_WRITE and PR_POLL_EXCEPT. * PR_Poll() should have been called and set the out_flags. * RETURN: PRStatus * If the nonblocking connect has successfully completed, * PR_GetConnectStatus returns PR_SUCCESS. If PR_GetConnectStatus() * returns PR_FAILURE, call PR_GetError(): * - PR_IN_PROGRESS_ERROR: the nonblocking connect is still in * progress and has not completed yet. * - Other errors: the nonblocking connect has failed with this * error code. */ NSPR_API(PRStatus) PR_GetConnectStatus(const PRPollDesc *pd); /* ************************************************************************* * FUNCTION: PR_Accept * DESCRIPTION: * Accept a connection on a socket. * INPUTS: * PRFileDesc *fd * Points to a PRFileDesc object representing the rendezvous socket * on which the caller is willing to accept new connections. * PRIntervalTime timeout * Time limit for completion of the accept operation. * OUTPUTS: * PRNetAddr *addr * Returns the address of the connecting entity in its own * communication space. It may be NULL. * RETURN: PRFileDesc* * Upon successful acceptance of a connection, PR_Accept * returns a valid file descriptor. Otherwise, it returns NULL. * Further failure information can be obtained by calling PR_GetError(). ************************************************************************** */ NSPR_API(PRFileDesc*) PR_Accept( PRFileDesc *fd, PRNetAddr *addr, PRIntervalTime timeout); /* ************************************************************************* * FUNCTION: PR_Bind * DESCRIPTION: * Bind an address to a socket. * INPUTS: * PRFileDesc *fd * Points to a PRFileDesc object representing a socket. * PRNetAddr *addr * Specifies the address to which the socket will be bound. * OUTPUTS: * None * RETURN: PRStatus * Upon successful binding of an address to a socket, PR_Bind * returns PR_SUCCESS. Otherwise, it returns PR_FAILURE. Further * failure information can be obtained by calling PR_GetError(). ************************************************************************** */ NSPR_API(PRStatus) PR_Bind(PRFileDesc *fd, const PRNetAddr *addr); /* ************************************************************************* * FUNCTION: PR_Listen * DESCRIPTION: * Listen for connections on a socket. * INPUTS: * PRFileDesc *fd * Points to a PRFileDesc object representing a socket that will be * used to listen for new connections. * PRIntn backlog * Specifies the maximum length of the queue of pending connections. * OUTPUTS: * None * RETURN: PRStatus * Upon successful completion of listen request, PR_Listen * returns PR_SUCCESS. Otherwise, it returns PR_FAILURE. Further * failure information can be obtained by calling PR_GetError(). ************************************************************************** */ NSPR_API(PRStatus) PR_Listen(PRFileDesc *fd, PRIntn backlog); /* ************************************************************************* * FUNCTION: PR_Shutdown * DESCRIPTION: * Shut down part of a full-duplex connection on a socket. * INPUTS: * PRFileDesc *fd * Points to a PRFileDesc object representing a connected socket. * PRIntn how * Specifies the kind of disallowed operations on the socket. * PR_SHUTDOWN_RCV - Further receives will be disallowed * PR_SHUTDOWN_SEND - Further sends will be disallowed * PR_SHUTDOWN_BOTH - Further sends and receives will be disallowed * OUTPUTS: * None * RETURN: PRStatus * Upon successful completion of shutdown request, PR_Shutdown * returns PR_SUCCESS. Otherwise, it returns PR_FAILURE. Further * failure information can be obtained by calling PR_GetError(). ************************************************************************** */ typedef enum PRShutdownHow { PR_SHUTDOWN_RCV = 0, /* disallow further receives */ PR_SHUTDOWN_SEND = 1, /* disallow further sends */ PR_SHUTDOWN_BOTH = 2 /* disallow further receives and sends */ } PRShutdownHow; NSPR_API(PRStatus) PR_Shutdown(PRFileDesc *fd, PRShutdownHow how); /* ************************************************************************* * FUNCTION: PR_Recv * DESCRIPTION: * Receive a specified number of bytes from a connected socket. * The operation will block until some positive number of bytes are * transferred, a time out has occurred, or there is an error. * No more than 'amount' bytes will be transferred. * INPUTS: * PRFileDesc *fd * points to a PRFileDesc object representing a socket. * void *buf * pointer to a buffer to hold the data received. * PRInt32 amount * the size of 'buf' (in bytes) * PRIntn flags * must be zero or PR_MSG_PEEK. * PRIntervalTime timeout * Time limit for completion of the receive operation. * OUTPUTS: * None * RETURN: PRInt32 * a positive number indicates the number of bytes actually received. * 0 means the network connection is closed. * -1 indicates a failure. The reason for the failure is obtained * by calling PR_GetError(). ************************************************************************** */ #define PR_MSG_PEEK 0x2 NSPR_API(PRInt32) PR_Recv(PRFileDesc *fd, void *buf, PRInt32 amount, PRIntn flags, PRIntervalTime timeout); /* ************************************************************************* * FUNCTION: PR_Send * DESCRIPTION: * Send a specified number of bytes from a connected socket. * The operation will block until all bytes are * processed, a time out has occurred, or there is an error. * INPUTS: * PRFileDesc *fd * points to a PRFileDesc object representing a socket. * void *buf * pointer to a buffer from where the data is sent. * PRInt32 amount * the size of 'buf' (in bytes) * PRIntn flags * (OBSOLETE - must always be zero) * PRIntervalTime timeout * Time limit for completion of the send operation. * OUTPUTS: * None * RETURN: PRInt32 * A positive number indicates the number of bytes successfully processed. * This number must always equal 'amount'. A -1 is an indication that the * operation failed. The reason for the failure is obtained by calling * PR_GetError(). ************************************************************************** */ NSPR_API(PRInt32) PR_Send(PRFileDesc *fd, const void *buf, PRInt32 amount, PRIntn flags, PRIntervalTime timeout); /* ************************************************************************* * FUNCTION: PR_RecvFrom * DESCRIPTION: * Receive up to a specified number of bytes from socket which may * or may not be connected. * The operation will block until one or more bytes are * transferred, a time out has occurred, or there is an error. * No more than 'amount' bytes will be transferred. * INPUTS: * PRFileDesc *fd * points to a PRFileDesc object representing a socket. * void *buf * pointer to a buffer to hold the data received. * PRInt32 amount * the size of 'buf' (in bytes) * PRIntn flags * (OBSOLETE - must always be zero) * PRNetAddr *addr * Specifies the address of the sending peer. It may be NULL. * PRIntervalTime timeout * Time limit for completion of the receive operation. * OUTPUTS: * None * RETURN: PRInt32 * a positive number indicates the number of bytes actually received. * 0 means the network connection is closed. * -1 indicates a failure. The reason for the failure is obtained * by calling PR_GetError(). ************************************************************************** */ NSPR_API(PRInt32) PR_RecvFrom( PRFileDesc *fd, void *buf, PRInt32 amount, PRIntn flags, PRNetAddr *addr, PRIntervalTime timeout); /* ************************************************************************* * FUNCTION: PR_SendTo * DESCRIPTION: * Send a specified number of bytes from an unconnected socket. * The operation will block until all bytes are * sent, a time out has occurred, or there is an error. * INPUTS: * PRFileDesc *fd * points to a PRFileDesc object representing an unconnected socket. * void *buf * pointer to a buffer from where the data is sent. * PRInt32 amount * the size of 'buf' (in bytes) * PRIntn flags * (OBSOLETE - must always be zero) * PRNetAddr *addr * Specifies the address of the peer. .* PRIntervalTime timeout * Time limit for completion of the send operation. * OUTPUTS: * None * RETURN: PRInt32 * A positive number indicates the number of bytes successfully sent. * -1 indicates a failure. The reason for the failure is obtained * by calling PR_GetError(). ************************************************************************** */ NSPR_API(PRInt32) PR_SendTo( PRFileDesc *fd, const void *buf, PRInt32 amount, PRIntn flags, const PRNetAddr *addr, PRIntervalTime timeout); /* ************************************************************************* ** FUNCTION: PR_TransmitFile ** DESCRIPTION: ** Transmitfile sends a complete file (sourceFile) across a socket ** (networkSocket). If headers is non-NULL, the headers will be sent across ** the socket prior to sending the file. ** ** Optionally, the PR_TRANSMITFILE_CLOSE_SOCKET flag may be passed to ** transmitfile. This flag specifies that transmitfile should close the ** socket after sending the data. ** ** INPUTS: ** PRFileDesc *networkSocket ** The socket to send data over ** PRFileDesc *sourceFile ** The file to send ** const void *headers ** A pointer to headers to be sent before sending data ** PRInt32 hlen ** length of header buffers in bytes. ** PRTransmitFileFlags flags ** If the flags indicate that the connection should be closed, ** it will be done immediately after transferring the file, unless ** the operation is unsuccessful. .* PRIntervalTime timeout * Time limit for completion of the transmit operation. ** ** RETURNS: ** Returns the number of bytes written or -1 if the operation failed. ** If an error occurs while sending the file, the PR_TRANSMITFILE_CLOSE_ ** SOCKET flag is ignored. The reason for the failure is obtained ** by calling PR_GetError(). ************************************************************************** */ NSPR_API(PRInt32) PR_TransmitFile( PRFileDesc *networkSocket, PRFileDesc *sourceFile, const void *headers, PRInt32 hlen, PRTransmitFileFlags flags, PRIntervalTime timeout); /* ************************************************************************* ** FUNCTION: PR_SendFile ** DESCRIPTION: ** PR_SendFile sends data from a file (sendData->fd) across a socket ** (networkSocket). If specified, a header and/or trailer buffer are sent ** before and after the file, respectively. The file offset, number of bytes ** of file data to send, the header and trailer buffers are specified in the ** sendData argument. ** ** Optionally, if the PR_TRANSMITFILE_CLOSE_SOCKET flag is passed, the ** socket is closed after successfully sending the data. ** ** INPUTS: ** PRFileDesc *networkSocket ** The socket to send data over ** PRSendFileData *sendData ** Contains the FD, file offset and length, header and trailer ** buffer specifications. ** PRTransmitFileFlags flags ** If the flags indicate that the connection should be closed, ** it will be done immediately after transferring the file, unless ** the operation is unsuccessful. .* PRIntervalTime timeout * Time limit for completion of the send operation. ** ** RETURNS: ** Returns the number of bytes written or -1 if the operation failed. ** If an error occurs while sending the file, the PR_TRANSMITFILE_CLOSE_ ** SOCKET flag is ignored. The reason for the failure is obtained ** by calling PR_GetError(). ************************************************************************** */ struct PRSendFileData { PRFileDesc *fd; /* file to send */ PRUint32 file_offset; /* file offset */ PRSize file_nbytes; /* number of bytes of file data to send */ /* if 0, send data from file_offset to */ /* end-of-file. */ const void *header; /* header buffer */ PRInt32 hlen; /* header len */ const void *trailer; /* trailer buffer */ PRInt32 tlen; /* trailer len */ }; NSPR_API(PRInt32) PR_SendFile( PRFileDesc *networkSocket, PRSendFileData *sendData, PRTransmitFileFlags flags, PRIntervalTime timeout); /* ************************************************************************* ** FUNCTION: PR_AcceptRead ** DESCRIPTION: ** AcceptRead accepts a new connection, returns the newly created ** socket's descriptor and also returns the connecting peer's address. ** AcceptRead, as its name suggests, also receives the first block of data ** sent by the peer. ** ** INPUTS: ** PRFileDesc *listenSock ** A socket descriptor that has been called with the PR_Listen() ** function, also known as the rendezvous socket. ** void *buf ** A pointer to a buffer to receive data sent by the client. This ** buffer must be large enough to receive bytes of data ** and two PRNetAddr structures, plus an extra 32 bytes. See: ** PR_ACCEPT_READ_BUF_OVERHEAD. ** PRInt32 amount ** The number of bytes of client data to receive. Does not include ** the size of the PRNetAddr structures. If 0, no data will be read ** from the client. ** PRIntervalTime timeout ** The timeout interval only applies to the read portion of the ** operation. PR_AcceptRead will block indefinitely until the ** connection is accepted; the read will timeout after the timeout ** interval elapses. ** OUTPUTS: ** PRFileDesc **acceptedSock ** The file descriptor for the newly connected socket. This parameter ** will only be valid if the function return does not indicate failure. ** PRNetAddr **peerAddr, ** The address of the remote socket. This parameter will only be ** valid if the function return does not indicate failure. The ** returned address is not guaranteed to be properly aligned. ** ** RETURNS: ** The number of bytes read from the client or -1 on failure. The reason ** for the failure is obtained by calling PR_GetError(). ************************************************************************** **/ /* define buffer overhead constant. Add this value to the user's ** data length when allocating a buffer to accept data. ** Example: ** #define USER_DATA_SIZE 10 ** char buf[USER_DATA_SIZE + PR_ACCEPT_READ_BUF_OVERHEAD]; ** bytesRead = PR_AcceptRead( s, fd, &a, &p, USER_DATA_SIZE, ...); */ #define PR_ACCEPT_READ_BUF_OVERHEAD (32+(2*sizeof(PRNetAddr))) NSPR_API(PRInt32) PR_AcceptRead( PRFileDesc *listenSock, PRFileDesc **acceptedSock, PRNetAddr **peerAddr, void *buf, PRInt32 amount, PRIntervalTime timeout); /* ************************************************************************* ** FUNCTION: PR_NewTCPSocketPair ** DESCRIPTION: ** Create a new TCP socket pair. The returned descriptors can be used ** interchangeably; they are interconnected full-duplex descriptors: data ** written to one can be read from the other and vice-versa. ** ** INPUTS: ** None ** OUTPUTS: ** PRFileDesc *fds[2] ** The file descriptor pair for the newly created TCP sockets. ** RETURN: PRStatus ** Upon successful completion of TCP socket pair, PR_NewTCPSocketPair ** returns PR_SUCCESS. Otherwise, it returns PR_FAILURE. Further ** failure information can be obtained by calling PR_GetError(). ** XXX can we implement this on windoze and mac? ************************************************************************** **/ NSPR_API(PRStatus) PR_NewTCPSocketPair(PRFileDesc *fds[2]); /* ************************************************************************* ** FUNCTION: PR_GetSockName ** DESCRIPTION: ** Get socket name. Return the network address for this socket. ** ** INPUTS: ** PRFileDesc *fd ** Points to a PRFileDesc object representing the socket. ** OUTPUTS: ** PRNetAddr *addr ** Returns the address of the socket in its own communication space. ** RETURN: PRStatus ** Upon successful completion, PR_GetSockName returns PR_SUCCESS. ** Otherwise, it returns PR_FAILURE. Further failure information can ** be obtained by calling PR_GetError(). ************************************************************************** **/ NSPR_API(PRStatus) PR_GetSockName(PRFileDesc *fd, PRNetAddr *addr); /* ************************************************************************* ** FUNCTION: PR_GetPeerName ** DESCRIPTION: ** Get name of the connected peer. Return the network address for the ** connected peer socket. ** ** INPUTS: ** PRFileDesc *fd ** Points to a PRFileDesc object representing the connected peer. ** OUTPUTS: ** PRNetAddr *addr ** Returns the address of the connected peer in its own communication ** space. ** RETURN: PRStatus ** Upon successful completion, PR_GetPeerName returns PR_SUCCESS. ** Otherwise, it returns PR_FAILURE. Further failure information can ** be obtained by calling PR_GetError(). ************************************************************************** **/ NSPR_API(PRStatus) PR_GetPeerName(PRFileDesc *fd, PRNetAddr *addr); NSPR_API(PRStatus) PR_GetSocketOption( PRFileDesc *fd, PRSocketOptionData *data); NSPR_API(PRStatus) PR_SetSocketOption( PRFileDesc *fd, const PRSocketOptionData *data); /* ********************************************************************* * * File descriptor inheritance * ********************************************************************* */ /* ************************************************************************ * FUNCTION: PR_SetFDInheritable * DESCRIPTION: * Set the inheritance attribute of a file descriptor. * * INPUTS: * PRFileDesc *fd * Points to a PRFileDesc object. * PRBool inheritable * If PR_TRUE, the file descriptor fd is set to be inheritable * by a child process. If PR_FALSE, the file descriptor is set * to be not inheritable by a child process. * RETURN: PRStatus * Upon successful completion, PR_SetFDInheritable returns PR_SUCCESS. * Otherwise, it returns PR_FAILURE. Further failure information can * be obtained by calling PR_GetError(). ************************************************************************* */ NSPR_API(PRStatus) PR_SetFDInheritable( PRFileDesc *fd, PRBool inheritable); /* ************************************************************************ * FUNCTION: PR_GetInheritedFD * DESCRIPTION: * Get an inherited file descriptor with the specified name. * * INPUTS: * const char *name * The name of the inherited file descriptor. * RETURN: PRFileDesc * * Upon successful completion, PR_GetInheritedFD returns the * inherited file descriptor with the specified name. Otherwise, * it returns NULL. Further failure information can be obtained * by calling PR_GetError(). ************************************************************************* */ NSPR_API(PRFileDesc *) PR_GetInheritedFD(const char *name); /* ********************************************************************* * * Memory-mapped files * ********************************************************************* */ typedef struct PRFileMap PRFileMap; /* * protection options for read and write accesses of a file mapping */ typedef enum PRFileMapProtect { PR_PROT_READONLY, /* read only */ PR_PROT_READWRITE, /* readable, and write is shared */ PR_PROT_WRITECOPY /* readable, and write is private (copy-on-write) */ } PRFileMapProtect; NSPR_API(PRFileMap *) PR_CreateFileMap( PRFileDesc *fd, PRInt64 size, PRFileMapProtect prot); /* * return the alignment (in bytes) of the offset argument to PR_MemMap */ NSPR_API(PRInt32) PR_GetMemMapAlignment(void); NSPR_API(void *) PR_MemMap( PRFileMap *fmap, PROffset64 offset, /* must be aligned and sized according to the * return value of PR_GetMemMapAlignment() */ PRUint32 len); NSPR_API(PRStatus) PR_MemUnmap(void *addr, PRUint32 len); NSPR_API(PRStatus) PR_CloseFileMap(PRFileMap *fmap); /* ****************************************************************** * * Interprocess communication * ****************************************************************** */ /* * Creates an anonymous pipe and returns file descriptors for the * read and write ends of the pipe. */ NSPR_API(PRStatus) PR_CreatePipe( PRFileDesc **readPipe, PRFileDesc **writePipe ); /************************************************************************/ /************** The following definitions are for poll ******************/ /************************************************************************/ struct PRPollDesc { PRFileDesc* fd; PRInt16 in_flags; PRInt16 out_flags; }; /* ** Bit values for PRPollDesc.in_flags or PRPollDesc.out_flags. Binary-or ** these together to produce the desired poll request. */ #if defined(_PR_POLL_BACKCOMPAT) #include #define PR_POLL_READ POLLIN #define PR_POLL_WRITE POLLOUT #define PR_POLL_EXCEPT POLLPRI #define PR_POLL_ERR POLLERR /* only in out_flags */ #define PR_POLL_NVAL POLLNVAL /* only in out_flags when fd is bad */ #define PR_POLL_HUP POLLHUP /* only in out_flags */ #else /* _PR_POLL_BACKCOMPAT */ #define PR_POLL_READ 0x1 #define PR_POLL_WRITE 0x2 #define PR_POLL_EXCEPT 0x4 #define PR_POLL_ERR 0x8 /* only in out_flags */ #define PR_POLL_NVAL 0x10 /* only in out_flags when fd is bad */ #define PR_POLL_HUP 0x20 /* only in out_flags */ #endif /* _PR_POLL_BACKCOMPAT */ /* ************************************************************************* ** FUNCTION: PR_Poll ** DESCRIPTION: ** ** The call returns as soon as I/O is ready on one or more of the underlying ** socket objects. A count of the number of ready descriptors is ** returned unless a timeout occurs in which case zero is returned. ** ** PRPollDesc.fd should be set to a pointer to a PRFileDesc object ** representing a socket. This field can be set to NULL to indicate to ** PR_Poll that this PRFileDesc object should be ignored. ** PRPollDesc.in_flags should be set to the desired request ** (read/write/except or some combination). Upon successful return from ** this call PRPollDesc.out_flags will be set to indicate what kind of ** i/o can be performed on the respective descriptor. PR_Poll() uses the ** out_flags fields as scratch variables during the call. If PR_Poll() ** returns 0 or -1, the out_flags fields do not contain meaningful values ** and must not be used. ** ** INPUTS: ** PRPollDesc *pds A pointer to an array of PRPollDesc ** ** PRIntn npds The number of elements in the array ** If this argument is zero PR_Poll is ** equivalent to a PR_Sleep(timeout). ** ** PRIntervalTime timeout Amount of time the call will block waiting ** for I/O to become ready. If this time expires ** w/o any I/O becoming ready, the result will ** be zero. ** ** OUTPUTS: None ** RETURN: ** PRInt32 Number of PRPollDesc's with events or zero ** if the function timed out or -1 on failure. ** The reason for the failure is obtained by ** calling PR_GetError(). ************************************************************************** */ NSPR_API(PRInt32) PR_Poll( PRPollDesc *pds, PRIntn npds, PRIntervalTime timeout); /* ************************************************************************** ** ** Pollable events ** ** A pollable event is a special kind of file descriptor. ** The only I/O operation you can perform on a pollable event ** is to poll it with the PR_POLL_READ flag. You can't ** read from or write to a pollable event. ** ** The purpose of a pollable event is to combine event waiting ** with I/O waiting in a single PR_Poll call. Pollable events ** are implemented using a pipe or a pair of TCP sockets ** connected via the loopback address, therefore setting and ** waiting for pollable events are expensive operating system ** calls. Do not use pollable events for general thread ** synchronization. Use condition variables instead. ** ** A pollable event has two states: set and unset. Events ** are not queued, so there is no notion of an event count. ** A pollable event is either set or unset. ** ** A new pollable event is created by a PR_NewPollableEvent ** call and is initially in the unset state. ** ** PR_WaitForPollableEvent blocks the calling thread until ** the pollable event is set, and then it atomically unsets ** the pollable event before it returns. ** ** To set a pollable event, call PR_SetPollableEvent. ** ** One can call PR_Poll with the PR_POLL_READ flag on a pollable ** event. When the pollable event is set, PR_Poll returns with ** the PR_POLL_READ flag set in the out_flags. ** ** To close a pollable event, call PR_DestroyPollableEvent ** (not PR_Close). ** ************************************************************************** */ NSPR_API(PRFileDesc *) PR_NewPollableEvent(void); NSPR_API(PRStatus) PR_DestroyPollableEvent(PRFileDesc *event); NSPR_API(PRStatus) PR_SetPollableEvent(PRFileDesc *event); NSPR_API(PRStatus) PR_WaitForPollableEvent(PRFileDesc *event); PR_END_EXTERN_C #endif /* prio_h___ */