1 /* 2 * Copyright 2012, Google Inc. 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions are 7 * met: 8 * 9 * * Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * * Redistributions in binary form must reproduce the above 12 * copyright notice, this list of conditions and the following disclaimer 13 * in the documentation and/or other materials provided with the 14 * distribution. 15 * * Neither the name of Google Inc. nor the names of its 16 * contributors may be used to endorse or promote products derived from 17 * this software without specific prior written permission. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 20 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 21 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 22 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 23 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 24 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 25 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 26 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 27 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 28 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 29 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 package org.jf.dexlib2; 33 34 public enum Opcode 35 { 36 NOP((short)0x00, "nop", ReferenceType.NONE, Format.Format10x, Opcode.CAN_CONTINUE), 37 MOVE((short)0x01, "move", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 38 MOVE_FROM16((short)0x02, "move/from16", ReferenceType.NONE, Format.Format22x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 39 MOVE_16((short)0x03, "move/16", ReferenceType.NONE, Format.Format32x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 40 MOVE_WIDE((short)0x04, "move-wide", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 41 MOVE_WIDE_FROM16((short)0x05, "move-wide/from16", ReferenceType.NONE, Format.Format22x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 42 MOVE_WIDE_16((short)0x06, "move-wide/16", ReferenceType.NONE, Format.Format32x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 43 MOVE_OBJECT((short)0x07, "move-object", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 44 MOVE_OBJECT_FROM16((short)0x08, "move-object/from16", ReferenceType.NONE, Format.Format22x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 45 MOVE_OBJECT_16((short)0x09, "move-object/16", ReferenceType.NONE, Format.Format32x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 46 MOVE_RESULT((short)0x0a, "move-result", ReferenceType.NONE, Format.Format11x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 47 MOVE_RESULT_WIDE((short)0x0b, "move-result-wide", ReferenceType.NONE, Format.Format11x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 48 MOVE_RESULT_OBJECT((short)0x0c, "move-result-object", ReferenceType.NONE, Format.Format11x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 49 MOVE_EXCEPTION((short)0x0d, "move-exception", ReferenceType.NONE, Format.Format11x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 50 RETURN_VOID((short)0x0e, "return-void", ReferenceType.NONE, Format.Format10x), 51 RETURN((short)0x0f, "return", ReferenceType.NONE, Format.Format11x), 52 RETURN_WIDE((short)0x10, "return-wide", ReferenceType.NONE, Format.Format11x), 53 RETURN_OBJECT((short)0x11, "return-object", ReferenceType.NONE, Format.Format11x), 54 CONST_4((short)0x12, "const/4", ReferenceType.NONE, Format.Format11n, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 55 CONST_16((short)0x13, "const/16", ReferenceType.NONE, Format.Format21s, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 56 CONST((short)0x14, "const", ReferenceType.NONE, Format.Format31i, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 57 CONST_HIGH16((short)0x15, "const/high16", ReferenceType.NONE, Format.Format21ih, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 58 CONST_WIDE_16((short)0x16, "const-wide/16", ReferenceType.NONE, Format.Format21s, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 59 CONST_WIDE_32((short)0x17, "const-wide/32", ReferenceType.NONE, Format.Format31i, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 60 CONST_WIDE((short)0x18, "const-wide", ReferenceType.NONE, Format.Format51l, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 61 CONST_WIDE_HIGH16((short)0x19, "const-wide/high16", ReferenceType.NONE, Format.Format21lh, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 62 CONST_STRING((short)0x1a, "const-string", ReferenceType.STRING, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER, (short)0x1b), 63 CONST_STRING_JUMBO((short)0x1b, "const-string/jumbo", ReferenceType.STRING, Format.Format31c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 64 CONST_CLASS((short)0x1c, "const-class", ReferenceType.TYPE, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 65 MONITOR_ENTER((short)0x1d, "monitor-enter", ReferenceType.NONE, Format.Format11x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 66 MONITOR_EXIT((short)0x1e, "monitor-exit", ReferenceType.NONE, Format.Format11x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 67 CHECK_CAST((short)0x1f, "check-cast", ReferenceType.TYPE, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 68 INSTANCE_OF((short)0x20, "instance-of", ReferenceType.TYPE, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 69 ARRAY_LENGTH((short)0x21, "array-length", ReferenceType.NONE, Format.Format12x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 70 NEW_INSTANCE((short)0x22, "new-instance", ReferenceType.TYPE, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 71 NEW_ARRAY((short)0x23, "new-array", ReferenceType.TYPE, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 72 FILLED_NEW_ARRAY((short)0x24, "filled-new-array", ReferenceType.TYPE, Format.Format35c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), 73 FILLED_NEW_ARRAY_RANGE((short)0x25, "filled-new-array/range", ReferenceType.TYPE, Format.Format3rc, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), 74 FILL_ARRAY_DATA((short)0x26, "fill-array-data", ReferenceType.NONE, Format.Format31t, Opcode.CAN_CONTINUE), 75 THROW((short)0x27, "throw", ReferenceType.NONE, Format.Format11x, Opcode.CAN_THROW), 76 GOTO((short)0x28, "goto", ReferenceType.NONE, Format.Format10t), 77 GOTO_16((short)0x29, "goto/16", ReferenceType.NONE, Format.Format20t), 78 GOTO_32((short)0x2a, "goto/32", ReferenceType.NONE, Format.Format30t), 79 PACKED_SWITCH((short)0x2b, "packed-switch", ReferenceType.NONE, Format.Format31t, Opcode.CAN_CONTINUE), 80 SPARSE_SWITCH((short)0x2c, "sparse-switch", ReferenceType.NONE, Format.Format31t, Opcode.CAN_CONTINUE), 81 CMPL_FLOAT((short)0x2d, "cmpl-float", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 82 CMPG_FLOAT((short)0x2e, "cmpg-float", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 83 CMPL_DOUBLE((short)0x2f, "cmpl-double", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 84 CMPG_DOUBLE((short)0x30, "cmpg-double", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 85 CMP_LONG((short)0x31, "cmp-long", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 86 IF_EQ((short)0x32, "if-eq", ReferenceType.NONE, Format.Format22t, Opcode.CAN_CONTINUE), 87 IF_NE((short)0x33, "if-ne", ReferenceType.NONE, Format.Format22t, Opcode.CAN_CONTINUE), 88 IF_LT((short)0x34, "if-lt", ReferenceType.NONE, Format.Format22t, Opcode.CAN_CONTINUE), 89 IF_GE((short)0x35, "if-ge", ReferenceType.NONE, Format.Format22t, Opcode.CAN_CONTINUE), 90 IF_GT((short)0x36, "if-gt", ReferenceType.NONE, Format.Format22t, Opcode.CAN_CONTINUE), 91 IF_LE((short)0x37, "if-le", ReferenceType.NONE, Format.Format22t, Opcode.CAN_CONTINUE), 92 IF_EQZ((short)0x38, "if-eqz", ReferenceType.NONE, Format.Format21t, Opcode.CAN_CONTINUE), 93 IF_NEZ((short)0x39, "if-nez", ReferenceType.NONE, Format.Format21t, Opcode.CAN_CONTINUE), 94 IF_LTZ((short)0x3a, "if-ltz", ReferenceType.NONE, Format.Format21t, Opcode.CAN_CONTINUE), 95 IF_GEZ((short)0x3b, "if-gez", ReferenceType.NONE, Format.Format21t, Opcode.CAN_CONTINUE), 96 IF_GTZ((short)0x3c, "if-gtz", ReferenceType.NONE, Format.Format21t, Opcode.CAN_CONTINUE), 97 IF_LEZ((short)0x3d, "if-lez", ReferenceType.NONE, Format.Format21t, Opcode.CAN_CONTINUE), 98 AGET((short)0x44, "aget", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 99 AGET_WIDE((short)0x45, "aget-wide", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 100 AGET_OBJECT((short)0x46, "aget-object", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 101 AGET_BOOLEAN((short)0x47, "aget-boolean", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 102 AGET_BYTE((short)0x48, "aget-byte", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 103 AGET_CHAR((short)0x49, "aget-char", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 104 AGET_SHORT((short)0x4a, "aget-short", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 105 APUT((short)0x4b, "aput", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 106 APUT_WIDE((short)0x4c, "aput-wide", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 107 APUT_OBJECT((short)0x4d, "aput-object", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 108 APUT_BOOLEAN((short)0x4e, "aput-boolean", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 109 APUT_BYTE((short)0x4f, "aput-byte", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 110 APUT_CHAR((short)0x50, "aput-char", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 111 APUT_SHORT((short)0x51, "aput-short", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 112 IGET((short)0x52, "iget", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 113 IGET_WIDE((short)0x53, "iget-wide", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 114 IGET_OBJECT((short)0x54, "iget-object", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 115 IGET_BOOLEAN((short)0x55, "iget-boolean", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 116 IGET_BYTE((short)0x56, "iget-byte", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 117 IGET_CHAR((short)0x57, "iget-char", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 118 IGET_SHORT((short)0x58, "iget-short", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 119 IPUT((short)0x59, "iput", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 120 IPUT_WIDE((short)0x5a, "iput-wide", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 121 IPUT_OBJECT((short)0x5b, "iput-object", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 122 IPUT_BOOLEAN((short)0x5c, "iput-boolean", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 123 IPUT_BYTE((short)0x5d, "iput-byte", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 124 IPUT_CHAR((short)0x5e, "iput-char", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 125 IPUT_SHORT((short)0x5f, "iput-short", ReferenceType.FIELD, Format.Format22c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 126 SGET((short)0x60, "sget", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 127 SGET_WIDE((short)0x61, "sget-wide", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 128 SGET_OBJECT((short)0x62, "sget-object", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 129 SGET_BOOLEAN((short)0x63, "sget-boolean", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 130 SGET_BYTE((short)0x64, "sget-byte", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 131 SGET_CHAR((short)0x65, "sget-char", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 132 SGET_SHORT((short)0x66, "sget-short", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 133 SPUT((short)0x67, "sput", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 134 SPUT_WIDE((short)0x68, "sput-wide", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 135 SPUT_OBJECT((short)0x69, "sput-object", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 136 SPUT_BOOLEAN((short)0x6a, "sput-boolean", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 137 SPUT_BYTE((short)0x6b, "sput-byte", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 138 SPUT_CHAR((short)0x6c, "sput-char", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 139 SPUT_SHORT((short)0x6d, "sput-short", ReferenceType.FIELD, Format.Format21c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 140 INVOKE_VIRTUAL((short)0x6e, "invoke-virtual", ReferenceType.METHOD, Format.Format35c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), 141 INVOKE_SUPER((short)0x6f, "invoke-super", ReferenceType.METHOD, Format.Format35c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), 142 INVOKE_DIRECT((short)0x70, "invoke-direct", ReferenceType.METHOD, Format.Format35c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT | Opcode.CAN_INITIALIZE_REFERENCE), 143 INVOKE_STATIC((short)0x71, "invoke-static", ReferenceType.METHOD, Format.Format35c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), 144 INVOKE_INTERFACE((short)0x72, "invoke-interface", ReferenceType.METHOD, Format.Format35c, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), 145 INVOKE_VIRTUAL_RANGE((short)0x74, "invoke-virtual/range", ReferenceType.METHOD, Format.Format3rc, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), 146 INVOKE_SUPER_RANGE((short)0x75, "invoke-super/range", ReferenceType.METHOD, Format.Format3rc, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), 147 INVOKE_DIRECT_RANGE((short)0x76, "invoke-direct/range", ReferenceType.METHOD, Format.Format3rc, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT | Opcode.CAN_INITIALIZE_REFERENCE), 148 INVOKE_STATIC_RANGE((short)0x77, "invoke-static/range", ReferenceType.METHOD, Format.Format3rc, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), 149 INVOKE_INTERFACE_RANGE((short)0x78, "invoke-interface/range", ReferenceType.METHOD, Format.Format3rc, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), 150 NEG_INT((short)0x7b, "neg-int", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 151 NOT_INT((short)0x7c, "not-int", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 152 NEG_LONG((short)0x7d, "neg-long", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 153 NOT_LONG((short)0x7e, "not-long", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 154 NEG_FLOAT((short)0x7f, "neg-float", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 155 NEG_DOUBLE((short)0x80, "neg-double", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 156 INT_TO_LONG((short)0x81, "int-to-long", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 157 INT_TO_FLOAT((short)0x82, "int-to-float", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 158 INT_TO_DOUBLE((short)0x83, "int-to-double", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 159 LONG_TO_INT((short)0x84, "long-to-int", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 160 LONG_TO_FLOAT((short)0x85, "long-to-float", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 161 LONG_TO_DOUBLE((short)0x86, "long-to-double", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 162 FLOAT_TO_INT((short)0x87, "float-to-int", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 163 FLOAT_TO_LONG((short)0x88, "float-to-long", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 164 FLOAT_TO_DOUBLE((short)0x89, "float-to-double", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 165 DOUBLE_TO_INT((short)0x8a, "double-to-int", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 166 DOUBLE_TO_LONG((short)0x8b, "double-to-long", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 167 DOUBLE_TO_FLOAT((short)0x8c, "double-to-float", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 168 INT_TO_BYTE((short)0x8d, "int-to-byte", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 169 INT_TO_CHAR((short)0x8e, "int-to-char", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 170 INT_TO_SHORT((short)0x8f, "int-to-short", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 171 ADD_INT((short)0x90, "add-int", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 172 SUB_INT((short)0x91, "sub-int", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 173 MUL_INT((short)0x92, "mul-int", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 174 DIV_INT((short)0x93, "div-int", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 175 REM_INT((short)0x94, "rem-int", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 176 AND_INT((short)0x95, "and-int", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 177 OR_INT((short)0x96, "or-int", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 178 XOR_INT((short)0x97, "xor-int", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 179 SHL_INT((short)0x98, "shl-int", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 180 SHR_INT((short)0x99, "shr-int", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 181 USHR_INT((short)0x9a, "ushr-int", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 182 ADD_LONG((short)0x9b, "add-long", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 183 SUB_LONG((short)0x9c, "sub-long", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 184 MUL_LONG((short)0x9d, "mul-long", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 185 DIV_LONG((short)0x9e, "div-long", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 186 REM_LONG((short)0x9f, "rem-long", ReferenceType.NONE, Format.Format23x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 187 AND_LONG((short)0xa0, "and-long", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 188 OR_LONG((short)0xa1, "or-long", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 189 XOR_LONG((short)0xa2, "xor-long", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 190 SHL_LONG((short)0xa3, "shl-long", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 191 SHR_LONG((short)0xa4, "shr-long", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 192 USHR_LONG((short)0xa5, "ushr-long", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 193 ADD_FLOAT((short)0xa6, "add-float", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 194 SUB_FLOAT((short)0xa7, "sub-float", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 195 MUL_FLOAT((short)0xa8, "mul-float", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 196 DIV_FLOAT((short)0xa9, "div-float", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 197 REM_FLOAT((short)0xaa, "rem-float", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 198 ADD_DOUBLE((short)0xab, "add-double", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 199 SUB_DOUBLE((short)0xac, "sub-double", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 200 MUL_DOUBLE((short)0xad, "mul-double", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 201 DIV_DOUBLE((short)0xae, "div-double", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 202 REM_DOUBLE((short)0xaf, "rem-double", ReferenceType.NONE, Format.Format23x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 203 ADD_INT_2ADDR((short)0xb0, "add-int/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 204 SUB_INT_2ADDR((short)0xb1, "sub-int/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 205 MUL_INT_2ADDR((short)0xb2, "mul-int/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 206 DIV_INT_2ADDR((short)0xb3, "div-int/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 207 REM_INT_2ADDR((short)0xb4, "rem-int/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 208 AND_INT_2ADDR((short)0xb5, "and-int/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 209 OR_INT_2ADDR((short)0xb6, "or-int/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 210 XOR_INT_2ADDR((short)0xb7, "xor-int/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 211 SHL_INT_2ADDR((short)0xb8, "shl-int/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 212 SHR_INT_2ADDR((short)0xb9, "shr-int/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 213 USHR_INT_2ADDR((short)0xba, "ushr-int/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 214 ADD_LONG_2ADDR((short)0xbb, "add-long/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 215 SUB_LONG_2ADDR((short)0xbc, "sub-long/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 216 MUL_LONG_2ADDR((short)0xbd, "mul-long/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 217 DIV_LONG_2ADDR((short)0xbe, "div-long/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 218 REM_LONG_2ADDR((short)0xbf, "rem-long/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 219 AND_LONG_2ADDR((short)0xc0, "and-long/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 220 OR_LONG_2ADDR((short)0xc1, "or-long/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 221 XOR_LONG_2ADDR((short)0xc2, "xor-long/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 222 SHL_LONG_2ADDR((short)0xc3, "shl-long/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 223 SHR_LONG_2ADDR((short)0xc4, "shr-long/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 224 USHR_LONG_2ADDR((short)0xc5, "ushr-long/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 225 ADD_FLOAT_2ADDR((short)0xc6, "add-float/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 226 SUB_FLOAT_2ADDR((short)0xc7, "sub-float/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 227 MUL_FLOAT_2ADDR((short)0xc8, "mul-float/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 228 DIV_FLOAT_2ADDR((short)0xc9, "div-float/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 229 REM_FLOAT_2ADDR((short)0xca, "rem-float/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 230 ADD_DOUBLE_2ADDR((short)0xcb, "add-double/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 231 SUB_DOUBLE_2ADDR((short)0xcc, "sub-double/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 232 MUL_DOUBLE_2ADDR((short)0xcd, "mul-double/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 233 DIV_DOUBLE_2ADDR((short)0xce, "div-double/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 234 REM_DOUBLE_2ADDR((short)0xcf, "rem-double/2addr", ReferenceType.NONE, Format.Format12x, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 235 ADD_INT_LIT16((short)0xd0, "add-int/lit16", ReferenceType.NONE, Format.Format22s, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 236 RSUB_INT((short)0xd1, "rsub-int", ReferenceType.NONE, Format.Format22s, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 237 MUL_INT_LIT16((short)0xd2, "mul-int/lit16", ReferenceType.NONE, Format.Format22s, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 238 DIV_INT_LIT16((short)0xd3, "div-int/lit16", ReferenceType.NONE, Format.Format22s, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 239 REM_INT_LIT16((short)0xd4, "rem-int/lit16", ReferenceType.NONE, Format.Format22s, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 240 AND_INT_LIT16((short)0xd5, "and-int/lit16", ReferenceType.NONE, Format.Format22s, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 241 OR_INT_LIT16((short)0xd6, "or-int/lit16", ReferenceType.NONE, Format.Format22s, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 242 XOR_INT_LIT16((short)0xd7, "xor-int/lit16", ReferenceType.NONE, Format.Format22s, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 243 ADD_INT_LIT8((short)0xd8, "add-int/lit8", ReferenceType.NONE, Format.Format22b, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 244 RSUB_INT_LIT8((short)0xd9, "rsub-int/lit8", ReferenceType.NONE, Format.Format22b, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 245 MUL_INT_LIT8((short)0xda, "mul-int/lit8", ReferenceType.NONE, Format.Format22b, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 246 DIV_INT_LIT8((short)0xdb, "div-int/lit8", ReferenceType.NONE, Format.Format22b, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 247 REM_INT_LIT8((short)0xdc, "rem-int/lit8", ReferenceType.NONE, Format.Format22b, Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 248 AND_INT_LIT8((short)0xdd, "and-int/lit8", ReferenceType.NONE, Format.Format22b, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 249 OR_INT_LIT8((short)0xde, "or-int/lit8", ReferenceType.NONE, Format.Format22b, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 250 XOR_INT_LIT8((short)0xdf, "xor-int/lit8", ReferenceType.NONE, Format.Format22b, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 251 SHL_INT_LIT8((short)0xe0, "shl-int/lit8", ReferenceType.NONE, Format.Format22b, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 252 SHR_INT_LIT8((short)0xe1, "shr-int/lit8", ReferenceType.NONE, Format.Format22b, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 253 USHR_INT_LIT8((short)0xe2, "ushr-int/lit8", ReferenceType.NONE, Format.Format22b, Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 254 255 IGET_VOLATILE((short)0xe3, "iget-volatile", minApi(9), ReferenceType.FIELD, Format.Format22c, Opcode.ODEX_ONLY | Opcode.ODEXED_INSTANCE_VOLATILE | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 256 IPUT_VOLATILE((short)0xe4, "iput-volatile", minApi(9), ReferenceType.FIELD, Format.Format22c, Opcode.ODEX_ONLY | Opcode.ODEXED_INSTANCE_VOLATILE | Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 257 SGET_VOLATILE((short)0xe5, "sget-volatile", minApi(9), ReferenceType.FIELD, Format.Format21c, Opcode.ODEX_ONLY | Opcode.ODEXED_STATIC_VOLATILE | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 258 SPUT_VOLATILE((short)0xe6, "sput-volatile", minApi(9), ReferenceType.FIELD, Format.Format21c, Opcode.ODEX_ONLY | Opcode.ODEXED_STATIC_VOLATILE | Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 259 IGET_OBJECT_VOLATILE((short)0xe7, "iget-object-volatile", minApi(9), ReferenceType.FIELD, Format.Format22c, Opcode.ODEX_ONLY | Opcode.ODEXED_INSTANCE_VOLATILE | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 260 IGET_WIDE_VOLATILE((short)0xe8, "iget-wide-volatile", minApi(9), ReferenceType.FIELD, Format.Format22c, Opcode.ODEX_ONLY | Opcode.ODEXED_INSTANCE_VOLATILE | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 261 IPUT_WIDE_VOLATILE((short)0xe9, "iput-wide-volatile", minApi(9), ReferenceType.FIELD, Format.Format22c, Opcode.ODEX_ONLY | Opcode.ODEXED_INSTANCE_VOLATILE | Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 262 SGET_WIDE_VOLATILE((short)0xea, "sget-wide-volatile", minApi(9), ReferenceType.FIELD, Format.Format21c, Opcode.ODEX_ONLY | Opcode.ODEXED_STATIC_VOLATILE | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 263 SPUT_WIDE_VOLATILE((short)0xeb, "sput-wide-volatile", minApi(9), ReferenceType.FIELD, Format.Format21c, Opcode.ODEX_ONLY | Opcode.ODEXED_STATIC_VOLATILE | Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 264 265 THROW_VERIFICATION_ERROR((short)0xed, "throw-verification-error", minApi(5), ReferenceType.NONE, Format.Format20bc, Opcode.ODEX_ONLY | Opcode.CAN_THROW), 266 EXECUTE_INLINE((short)0xee, "execute-inline", ReferenceType.NONE, Format.Format35mi, Opcode.ODEX_ONLY | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), 267 EXECUTE_INLINE_RANGE((short)0xef, "execute-inline/range", minApi(8), ReferenceType.NONE, Format.Format3rmi, Opcode.ODEX_ONLY | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), 268 INVOKE_DIRECT_EMPTY((short)0xf0, "invoke-direct-empty", maxApi(13), ReferenceType.METHOD, Format.Format35c, Opcode.ODEX_ONLY | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT | Opcode.CAN_INITIALIZE_REFERENCE), 269 INVOKE_OBJECT_INIT_RANGE((short)0xf0, "invoke-object-init/range", minApi(14), ReferenceType.METHOD, Format.Format3rc, Opcode.ODEX_ONLY | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT | Opcode.CAN_INITIALIZE_REFERENCE), 270 RETURN_VOID_BARRIER((short)0xf1, "return-void-barrier", minApi(11), ReferenceType.NONE, Format.Format10x, Opcode.ODEX_ONLY), 271 IGET_QUICK((short)0xf2, "iget-quick", ReferenceType.NONE, Format.Format22cs, Opcode.ODEX_ONLY | Opcode.ODEXED_INSTANCE_QUICK | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 272 IGET_WIDE_QUICK((short)0xf3, "iget-wide-quick", ReferenceType.NONE, Format.Format22cs, Opcode.ODEX_ONLY | Opcode.ODEXED_INSTANCE_QUICK | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER | Opcode.SETS_WIDE_REGISTER), 273 IGET_OBJECT_QUICK((short)0xf4, "iget-object-quick", ReferenceType.NONE, Format.Format22cs, Opcode.ODEX_ONLY | Opcode.ODEXED_INSTANCE_QUICK | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 274 IPUT_QUICK((short)0xf5, "iput-quick", ReferenceType.NONE, Format.Format22cs, Opcode.ODEX_ONLY | Opcode.ODEXED_INSTANCE_QUICK | Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 275 IPUT_WIDE_QUICK((short)0xf6, "iput-wide-quick", ReferenceType.NONE, Format.Format22cs, Opcode.ODEX_ONLY | Opcode.ODEXED_INSTANCE_QUICK | Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 276 IPUT_OBJECT_QUICK((short)0xf7, "iput-object-quick", ReferenceType.NONE, Format.Format22cs, Opcode.ODEX_ONLY | Opcode.ODEXED_INSTANCE_QUICK | Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 277 INVOKE_VIRTUAL_QUICK((short)0xf8, "invoke-virtual-quick", ReferenceType.NONE, Format.Format35ms, Opcode.ODEX_ONLY | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), 278 INVOKE_VIRTUAL_QUICK_RANGE((short)0xf9, "invoke-virtual-quick/range", ReferenceType.NONE, Format.Format3rms, Opcode.ODEX_ONLY | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), 279 INVOKE_SUPER_QUICK((short)0xfa, "invoke-super-quick", ReferenceType.NONE, Format.Format35ms, Opcode.ODEX_ONLY | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), 280 INVOKE_SUPER_QUICK_RANGE((short)0xfb, "invoke-super-quick/range", ReferenceType.NONE, Format.Format3rms, Opcode.ODEX_ONLY | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_RESULT), 281 282 IPUT_OBJECT_VOLATILE((short)0xfc, "iput-object-volatile", minApi(9), ReferenceType.FIELD, Format.Format22c, Opcode.ODEX_ONLY | Opcode.ODEXED_INSTANCE_VOLATILE | Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 283 SGET_OBJECT_VOLATILE((short)0xfd, "sget-object-volatile", minApi(9), ReferenceType.FIELD, Format.Format21c, Opcode.ODEX_ONLY | Opcode.ODEXED_STATIC_VOLATILE | Opcode.CAN_THROW | Opcode.CAN_CONTINUE | Opcode.SETS_REGISTER), 284 SPUT_OBJECT_VOLATILE((short)0xfe, "sput-object-volatile", minApi(9), ReferenceType.FIELD, Format.Format21c, Opcode.ODEX_ONLY | Opcode.ODEXED_STATIC_VOLATILE | Opcode.CAN_THROW | Opcode.CAN_CONTINUE), 285 286 PACKED_SWITCH_PAYLOAD((short)0x100, "packed-switch-payload", ReferenceType.NONE, Format.PackedSwitchPayload, 0), 287 SPARSE_SWITCH_PAYLOAD((short)0x200, "sparse-switch-payload", ReferenceType.NONE, Format.SparseSwitchPayload, 0), 288 ARRAY_PAYLOAD((short)0x300, "array-payload", ReferenceType.NONE, Format.ArrayPayload, 0); 289 290 //if the instruction can throw an exception 291 public static final int CAN_THROW = 0x1; 292 //if the instruction is an odex only instruction 293 public static final int ODEX_ONLY = 0x2; 294 //if execution can continue to the next instruction 295 public static final int CAN_CONTINUE = 0x4; 296 //if the instruction sets the "hidden" result register 297 public static final int SETS_RESULT = 0x8; 298 //if the instruction sets the value of it's first register 299 public static final int SETS_REGISTER = 0x10; 300 //if the instruction sets the value of it's first register to a wide type 301 public static final int SETS_WIDE_REGISTER = 0x20; 302 //if the instruction is an odexed iget-quick/iput-quick instruction 303 public static final int ODEXED_INSTANCE_QUICK = 0x40; 304 //if the instruction is an odexed iget-volatile/iput-volatile instruction 305 public static final int ODEXED_INSTANCE_VOLATILE = 0x80; 306 //if the instruction is an odexed sget-volatile/sput-volatile instruction 307 public static final int ODEXED_STATIC_VOLATILE = 0x100; 308 //if the instruction is a jumbo instruction 309 public static final int JUMBO_OPCODE = 0x200; 310 //if the instruction can initialize an uninitialized object reference 311 public static final int CAN_INITIALIZE_REFERENCE = 0x400; 312 313 private static final int ALL_APIS = 0xFFFF0000; 314 minApi(int api)315 private static int minApi(int api) { 316 return 0xFFFF0000 | (api & 0xFFFF); 317 } 318 maxApi(int api)319 private static int maxApi(int api) { 320 return api << 16; 321 } 322 323 public final short value; 324 public final String name; 325 // high 16-bits is the max api, low 16-bits is the min api 326 public final int apiConstraints; 327 public final int referenceType; 328 public final Format format; 329 public final int flags; 330 Opcode(short opcodeValue, String opcodeName, int referenceType, Format format)331 Opcode(short opcodeValue, String opcodeName, int referenceType, Format format) { 332 this(opcodeValue, opcodeName, ALL_APIS, referenceType, format, 0, (short)-1); 333 } 334 Opcode(short opcodeValue, String opcodeName, int referenceType, Format format, int flags)335 Opcode(short opcodeValue, String opcodeName, int referenceType, Format format, int flags) { 336 this(opcodeValue, opcodeName, ALL_APIS, referenceType, format, flags, (short)-1); 337 } 338 Opcode(short opcodeValue, String opcodeName, int referenceType, Format format, int flags, short jumboOpcodeValue)339 Opcode(short opcodeValue, String opcodeName, int referenceType, Format format, int flags, short jumboOpcodeValue) { 340 this(opcodeValue, opcodeName, ALL_APIS, referenceType, format, flags, jumboOpcodeValue); 341 } 342 Opcode(short opcodeValue, String opcodeName, int apiConstraints, int referenceType, Format format)343 Opcode(short opcodeValue, String opcodeName, int apiConstraints, int referenceType, Format format) { 344 this(opcodeValue, opcodeName, apiConstraints, referenceType, format, 0, (short)-1); 345 } 346 Opcode(short opcodeValue, String opcodeName, int apiConstraints, int referenceType, Format format, int flags)347 Opcode(short opcodeValue, String opcodeName, int apiConstraints, int referenceType, Format format, int flags) { 348 this(opcodeValue, opcodeName, apiConstraints, referenceType, format, flags, (short)-1); 349 } 350 Opcode(short opcodeValue, String opcodeName, int apiConstraints, int referenceType, Format format, int flags, short jumboOpcodeValue)351 Opcode(short opcodeValue, String opcodeName, int apiConstraints, int referenceType, Format format, int flags, 352 short jumboOpcodeValue) { 353 this.value = opcodeValue; 354 this.name = opcodeName; 355 this.apiConstraints = apiConstraints; 356 this.referenceType = referenceType; 357 this.format = format; 358 this.flags = flags; 359 // TODO: implement jumbo opcodes for dexlib2 and uncomment 360 // this.jumboOpcode = jumboOpcodeValue; 361 } 362 363 /** 364 * @return the minimum api level that can use this opcode (inclusive) 365 */ getMinApi()366 public int getMinApi() { 367 return apiConstraints & 0xFFFF; 368 } 369 370 /** 371 * @return the maximum api level that can to use this opcode (inclusive) 372 */ getMaxApi()373 public int getMaxApi() { 374 return apiConstraints >>> 16; 375 } 376 canThrow()377 public final boolean canThrow() { 378 return (flags & CAN_THROW) != 0; 379 } 380 odexOnly()381 public final boolean odexOnly() { 382 return (flags & ODEX_ONLY) != 0; 383 } 384 canContinue()385 public final boolean canContinue() { 386 return (flags & CAN_CONTINUE) != 0; 387 } 388 setsResult()389 public final boolean setsResult() { 390 return (flags & SETS_RESULT) != 0; 391 } 392 setsRegister()393 public final boolean setsRegister() { 394 return (flags & SETS_REGISTER) != 0; 395 } 396 setsWideRegister()397 public final boolean setsWideRegister() { 398 return (flags & SETS_WIDE_REGISTER) != 0; 399 } 400 isOdexedInstanceQuick()401 public final boolean isOdexedInstanceQuick() { 402 return (flags & ODEXED_INSTANCE_QUICK) != 0; 403 } 404 isOdexedInstanceVolatile()405 public final boolean isOdexedInstanceVolatile() { 406 return (flags & ODEXED_INSTANCE_VOLATILE) != 0; 407 } 408 isOdexedStaticVolatile()409 public final boolean isOdexedStaticVolatile() { 410 return (flags & ODEXED_STATIC_VOLATILE) != 0; 411 } 412 isJumboOpcode()413 public final boolean isJumboOpcode() { 414 return (flags & JUMBO_OPCODE) != 0; 415 } 416 canInitializeReference()417 public final boolean canInitializeReference() { 418 return (flags & CAN_INITIALIZE_REFERENCE) != 0; 419 } 420 } 421