* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_SETTINGS = "android.settings.SETTINGS"; /** * Activity Action: Show settings to allow configuration of APNs. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_APN_SETTINGS = "android.settings.APN_SETTINGS"; /** * Activity Action: Show settings to allow configuration of current location * sources. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_LOCATION_SOURCE_SETTINGS = "android.settings.LOCATION_SOURCE_SETTINGS"; /** * Activity Action: Show settings to allow configuration of wireless controls * such as Wi-Fi, Bluetooth and Mobile networks. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_WIRELESS_SETTINGS = "android.settings.WIRELESS_SETTINGS"; /** * Activity Action: Show settings to allow entering/exiting airplane mode. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_AIRPLANE_MODE_SETTINGS = "android.settings.AIRPLANE_MODE_SETTINGS"; /** * Activity Action: Modify Airplane mode settings using a voice command. *
* In some cases, a matching Activity may not exist, so ensure you safeguard against this. *
* This intent MUST be started using * {@link android.service.voice.VoiceInteractionSession#startVoiceActivity * startVoiceActivity}. *
* Note: The activity implementing this intent MUST verify that * {@link android.app.Activity#isVoiceInteraction isVoiceInteraction} returns true before * modifying the setting. *
* Input: To tell which state airplane mode should be set to, add the * {@link #EXTRA_AIRPLANE_MODE_ENABLED} extra to this Intent with the state specified. * If the extra is not included, no changes will be made. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_VOICE_CONTROL_AIRPLANE_MODE = "android.settings.VOICE_CONTROL_AIRPLANE_MODE"; /** * Activity Action: Show settings for accessibility modules. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_ACCESSIBILITY_SETTINGS = "android.settings.ACCESSIBILITY_SETTINGS"; /** * Activity Action: Show settings to control access to usage information. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_USAGE_ACCESS_SETTINGS = "android.settings.USAGE_ACCESS_SETTINGS"; /** * Activity Category: Show application settings related to usage access. *
* An activity that provides a user interface for adjusting usage access related * preferences for its containing application. Optional but recommended for apps that * use {@link android.Manifest.permission#PACKAGE_USAGE_STATS}. *
* The activity may define meta-data to describe what usage access is * used for within their app with {@link #METADATA_USAGE_ACCESS_REASON}, which * will be displayed in Settings. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.INTENT_CATEGORY) public static final String INTENT_CATEGORY_USAGE_ACCESS_CONFIG = "android.intent.category.USAGE_ACCESS_CONFIG"; /** * Metadata key: Reason for needing usage access. *
* A key for metadata attached to an activity that receives action * {@link #INTENT_CATEGORY_USAGE_ACCESS_CONFIG}, shown to the * user as description of how the app uses usage access. *
*/ public static final String METADATA_USAGE_ACCESS_REASON = "android.settings.metadata.USAGE_ACCESS_REASON"; /** * Activity Action: Show settings to allow configuration of security and * location privacy. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_SECURITY_SETTINGS = "android.settings.SECURITY_SETTINGS"; /** * Activity Action: Show trusted credentials settings, opening to the user tab, * to allow management of installed credentials. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. * @hide */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_TRUSTED_CREDENTIALS_USER = "com.android.settings.TRUSTED_CREDENTIALS_USER"; /** * Activity Action: Show dialog explaining that an installed CA cert may enable * monitoring of encrypted network traffic. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. * @hide */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_MONITORING_CERT_INFO = "com.android.settings.MONITORING_CERT_INFO"; /** * Activity Action: Show settings to allow configuration of privacy options. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_PRIVACY_SETTINGS = "android.settings.PRIVACY_SETTINGS"; /** * Activity Action: Show settings to allow configuration of Wi-Fi. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_WIFI_SETTINGS = "android.settings.WIFI_SETTINGS"; /** * Activity Action: Show settings to allow configuration of a static IP * address for Wi-Fi. *
* In some cases, a matching Activity may not exist, so ensure you safeguard * against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_WIFI_IP_SETTINGS = "android.settings.WIFI_IP_SETTINGS"; /** * Activity Action: Show settings to allow configuration of Bluetooth. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_BLUETOOTH_SETTINGS = "android.settings.BLUETOOTH_SETTINGS"; /** * Activity Action: Show settings to allow configuration of cast endpoints. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_CAST_SETTINGS = "android.settings.CAST_SETTINGS"; /** * Activity Action: Show settings to allow configuration of date and time. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_DATE_SETTINGS = "android.settings.DATE_SETTINGS"; /** * Activity Action: Show settings to allow configuration of sound and volume. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_SOUND_SETTINGS = "android.settings.SOUND_SETTINGS"; /** * Activity Action: Show settings to allow configuration of display. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_DISPLAY_SETTINGS = "android.settings.DISPLAY_SETTINGS"; /** * Activity Action: Show settings to allow configuration of locale. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_LOCALE_SETTINGS = "android.settings.LOCALE_SETTINGS"; /** * Activity Action: Show settings to configure input methods, in particular * allowing the user to enable input methods. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_VOICE_INPUT_SETTINGS = "android.settings.VOICE_INPUT_SETTINGS"; /** * Activity Action: Show settings to configure input methods, in particular * allowing the user to enable input methods. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_INPUT_METHOD_SETTINGS = "android.settings.INPUT_METHOD_SETTINGS"; /** * Activity Action: Show settings to enable/disable input method subtypes. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* To tell which input method's subtypes are displayed in the settings, add * {@link #EXTRA_INPUT_METHOD_ID} extra to this Intent with the input method id. * If there is no extra in this Intent, subtypes from all installed input methods * will be displayed in the settings. * * @see android.view.inputmethod.InputMethodInfo#getId *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_INPUT_METHOD_SUBTYPE_SETTINGS = "android.settings.INPUT_METHOD_SUBTYPE_SETTINGS"; /** * Activity Action: Show a dialog to select input method. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. * @hide */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_SHOW_INPUT_METHOD_PICKER = "android.settings.SHOW_INPUT_METHOD_PICKER"; /** * Activity Action: Show settings to manage the user input dictionary. *
* Starting with {@link android.os.Build.VERSION_CODES#KITKAT}, * it is guaranteed there will always be an appropriate implementation for this Intent action. * In prior releases of the platform this was optional, so ensure you safeguard against it. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_USER_DICTIONARY_SETTINGS = "android.settings.USER_DICTIONARY_SETTINGS"; /** * Activity Action: Adds a word to the user dictionary. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: An extra with key word that contains the word
* that should be added to the dictionary.
*
* Output: Nothing. * * @hide */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_USER_DICTIONARY_INSERT = "com.android.settings.USER_DICTIONARY_INSERT"; /** * Activity Action: Show settings to allow configuration of application-related settings. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_APPLICATION_SETTINGS = "android.settings.APPLICATION_SETTINGS"; /** * Activity Action: Show settings to allow configuration of application * development-related settings. As of * {@link android.os.Build.VERSION_CODES#JELLY_BEAN_MR1} this action is * a required part of the platform. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_APPLICATION_DEVELOPMENT_SETTINGS = "android.settings.APPLICATION_DEVELOPMENT_SETTINGS"; /** * Activity Action: Show settings to allow configuration of quick launch shortcuts. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_QUICK_LAUNCH_SETTINGS = "android.settings.QUICK_LAUNCH_SETTINGS"; /** * Activity Action: Show settings to manage installed applications. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_MANAGE_APPLICATIONS_SETTINGS = "android.settings.MANAGE_APPLICATIONS_SETTINGS"; /** * Activity Action: Show settings to manage all applications. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_MANAGE_ALL_APPLICATIONS_SETTINGS = "android.settings.MANAGE_ALL_APPLICATIONS_SETTINGS"; /** * Activity Action: Show screen for controlling which apps can draw on top of other apps. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Optionally, the Intent's data URI can specify the application package name to * directly invoke the management GUI specific to the package name. For example * "package:com.my.app". *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_MANAGE_OVERLAY_PERMISSION = "android.settings.action.MANAGE_OVERLAY_PERMISSION"; /** * Activity Action: Show screen for controlling which apps are allowed to write/modify * system settings. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Optionally, the Intent's data URI can specify the application package name to * directly invoke the management GUI specific to the package name. For example * "package:com.my.app". *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_MANAGE_WRITE_SETTINGS = "android.settings.action.MANAGE_WRITE_SETTINGS"; /** * Activity Action: Show screen of details about a particular application. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: The Intent's data URI specifies the application package name * to be shown, with the "package" scheme. That is "package:com.my.app". *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_APPLICATION_DETAILS_SETTINGS = "android.settings.APPLICATION_DETAILS_SETTINGS"; /** * Activity Action: Show screen for controlling which apps can ignore battery optimizations. *
* Input: Nothing. *
* Output: Nothing. *
* You can use {@link android.os.PowerManager#isIgnoringBatteryOptimizations * PowerManager.isIgnoringBatteryOptimizations()} to determine if an application is * already ignoring optimizations. You can use * {@link #ACTION_REQUEST_IGNORE_BATTERY_OPTIMIZATIONS} to ask the user to put you * on this list. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_IGNORE_BATTERY_OPTIMIZATION_SETTINGS = "android.settings.IGNORE_BATTERY_OPTIMIZATION_SETTINGS"; /** * Activity Action: Ask the user to allow an to ignore battery optimizations (that is, * put them on the whitelist of apps shown by * {@link #ACTION_IGNORE_BATTERY_OPTIMIZATION_SETTINGS}). For an app to use this, it also * must hold the {@link android.Manifest.permission#REQUEST_IGNORE_BATTERY_OPTIMIZATIONS} * permission. *
Note: most applications should not use this; there are many facilities * provided by the platform for applications to operate correctly in the various power * saving mode. This is only for unusual applications that need to deeply control their own * execution, at the potential expense of the user's battery life. Note that these applications * greatly run the risk of showing to the user has how power consumers on their device.
** Input: The Intent's data URI must specify the application package name * to be shown, with the "package" scheme. That is "package:com.my.app". *
* Output: Nothing. *
* You can use {@link android.os.PowerManager#isIgnoringBatteryOptimizations * PowerManager.isIgnoringBatteryOptimizations()} to determine if an application is * already ignoring optimizations. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_REQUEST_IGNORE_BATTERY_OPTIMIZATIONS = "android.settings.REQUEST_IGNORE_BATTERY_OPTIMIZATIONS"; /** * @hide * Activity Action: Show the "app ops" settings screen. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_APP_OPS_SETTINGS = "android.settings.APP_OPS_SETTINGS"; /** * Activity Action: Show settings for system update functionality. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. * * @hide */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_SYSTEM_UPDATE_SETTINGS = "android.settings.SYSTEM_UPDATE_SETTINGS"; /** * Activity Action: Show settings to allow configuration of sync settings. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* The account types available to add via the add account button may be restricted by adding an * {@link #EXTRA_AUTHORITIES} extra to this Intent with one or more syncable content provider's * authorities. Only account types which can sync with that content provider will be offered to * the user. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_SYNC_SETTINGS = "android.settings.SYNC_SETTINGS"; /** * Activity Action: Show add account screen for creating a new account. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* The account types available to add may be restricted by adding an {@link #EXTRA_AUTHORITIES} * extra to the Intent with one or more syncable content provider's authorities. Only account * types which can sync with that content provider will be offered to the user. *
* Account types can also be filtered by adding an {@link #EXTRA_ACCOUNT_TYPES} extra to the * Intent with one or more account types. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_ADD_ACCOUNT = "android.settings.ADD_ACCOUNT_SETTINGS"; /** * Activity Action: Show settings for selecting the network operator. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_NETWORK_OPERATOR_SETTINGS = "android.settings.NETWORK_OPERATOR_SETTINGS"; /** * Activity Action: Show settings for selection of 2G/3G. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_DATA_ROAMING_SETTINGS = "android.settings.DATA_ROAMING_SETTINGS"; /** * Activity Action: Show settings for internal storage. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_INTERNAL_STORAGE_SETTINGS = "android.settings.INTERNAL_STORAGE_SETTINGS"; /** * Activity Action: Show settings for memory card storage. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_MEMORY_CARD_SETTINGS = "android.settings.MEMORY_CARD_SETTINGS"; /** * Activity Action: Show settings for global search. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_SEARCH_SETTINGS = "android.search.action.SEARCH_SETTINGS"; /** * Activity Action: Show general device information settings (serial * number, software version, phone number, etc.). *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_DEVICE_INFO_SETTINGS = "android.settings.DEVICE_INFO_SETTINGS"; /** * Activity Action: Show NFC settings. *
* This shows UI that allows NFC to be turned on or off. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing * @see android.nfc.NfcAdapter#isEnabled() */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_NFC_SETTINGS = "android.settings.NFC_SETTINGS"; /** * Activity Action: Show NFC Sharing settings. *
* This shows UI that allows NDEF Push (Android Beam) to be turned on or * off. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing * @see android.nfc.NfcAdapter#isNdefPushEnabled() */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_NFCSHARING_SETTINGS = "android.settings.NFCSHARING_SETTINGS"; /** * Activity Action: Show NFC Tap & Pay settings *
* This shows UI that allows the user to configure Tap&Pay * settings. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_NFC_PAYMENT_SETTINGS = "android.settings.NFC_PAYMENT_SETTINGS"; /** * Activity Action: Show Daydream settings. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. * @see android.service.dreams.DreamService */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_DREAM_SETTINGS = "android.settings.DREAM_SETTINGS"; /** * Activity Action: Show Notification listener settings. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. * @see android.service.notification.NotificationListenerService */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_NOTIFICATION_LISTENER_SETTINGS = "android.settings.ACTION_NOTIFICATION_LISTENER_SETTINGS"; /** * Activity Action: Show Do Not Disturb access settings. *
* Users can grant and deny access to Do Not Disturb configuration from here. * See {@link android.app.NotificationManager#isNotificationPolicyAccessGranted()} for more * details. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_NOTIFICATION_POLICY_ACCESS_SETTINGS = "android.settings.NOTIFICATION_POLICY_ACCESS_SETTINGS"; /** * @hide */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_CONDITION_PROVIDER_SETTINGS = "android.settings.ACTION_CONDITION_PROVIDER_SETTINGS"; /** * Activity Action: Show settings for video captioning. *
* In some cases, a matching Activity may not exist, so ensure you safeguard * against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_CAPTIONING_SETTINGS = "android.settings.CAPTIONING_SETTINGS"; /** * Activity Action: Show the top level print settings. *
* In some cases, a matching Activity may not exist, so ensure you * safeguard against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_PRINT_SETTINGS = "android.settings.ACTION_PRINT_SETTINGS"; /** * Activity Action: Show Zen Mode configuration settings. * * @hide */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_ZEN_MODE_SETTINGS = "android.settings.ZEN_MODE_SETTINGS"; /** * Activity Action: Show Zen Mode priority configuration settings. * * @hide */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_ZEN_MODE_PRIORITY_SETTINGS = "android.settings.ZEN_MODE_PRIORITY_SETTINGS"; /** * Activity Action: Show Zen Mode automation configuration settings. * * @hide */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_ZEN_MODE_AUTOMATION_SETTINGS = "android.settings.ZEN_MODE_AUTOMATION_SETTINGS"; /** * Activity Action: Modify do not disturb mode settings. *
* In some cases, a matching Activity may not exist, so ensure you safeguard against this. *
* This intent MUST be started using * {@link android.service.voice.VoiceInteractionSession#startVoiceActivity * startVoiceActivity}. *
* Note: The Activity implementing this intent MUST verify that * {@link android.app.Activity#isVoiceInteraction isVoiceInteraction}. * returns true before modifying the setting. *
* Input: The optional {@link #EXTRA_DO_NOT_DISTURB_MODE_MINUTES} extra can be used to indicate * how long the user wishes to avoid interruptions for. The optional * {@link #EXTRA_DO_NOT_DISTURB_MODE_ENABLED} extra can be to indicate if the user is * enabling or disabling do not disturb mode. If either extra is not included, the * user maybe asked to provide the value. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_VOICE_CONTROL_DO_NOT_DISTURB_MODE = "android.settings.VOICE_CONTROL_DO_NOT_DISTURB_MODE"; /** * Activity Action: Show Zen Mode schedule rule configuration settings. * * @hide */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_ZEN_MODE_SCHEDULE_RULE_SETTINGS = "android.settings.ZEN_MODE_SCHEDULE_RULE_SETTINGS"; /** * Activity Action: Show Zen Mode event rule configuration settings. * * @hide */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_ZEN_MODE_EVENT_RULE_SETTINGS = "android.settings.ZEN_MODE_EVENT_RULE_SETTINGS"; /** * Activity Action: Show Zen Mode external rule configuration settings. * * @hide */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_ZEN_MODE_EXTERNAL_RULE_SETTINGS = "android.settings.ZEN_MODE_EXTERNAL_RULE_SETTINGS"; /** * Activity Action: Show the regulatory information screen for the device. *
* In some cases, a matching Activity may not exist, so ensure you safeguard * against this. *
* Input: Nothing. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_SHOW_REGULATORY_INFO = "android.settings.SHOW_REGULATORY_INFO"; /** * Activity Action: Show Device Name Settings. *
* In some cases, a matching Activity may not exist, so ensure you safeguard * against this. * * @hide */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String DEVICE_NAME_SETTINGS = "android.settings.DEVICE_NAME"; /** * Activity Action: Show pairing settings. *
* In some cases, a matching Activity may not exist, so ensure you safeguard * against this. * * @hide */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_PAIRING_SETTINGS = "android.settings.PAIRING_SETTINGS"; /** * Activity Action: Show battery saver settings. *
* In some cases, a matching Activity may not exist, so ensure you safeguard * against this. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_BATTERY_SAVER_SETTINGS = "android.settings.BATTERY_SAVER_SETTINGS"; /** * Activity Action: Modify Battery Saver mode setting using a voice command. *
* In some cases, a matching Activity may not exist, so ensure you safeguard against this. *
* This intent MUST be started using * {@link android.service.voice.VoiceInteractionSession#startVoiceActivity * startVoiceActivity}. *
* Note: The activity implementing this intent MUST verify that * {@link android.app.Activity#isVoiceInteraction isVoiceInteraction} returns true before * modifying the setting. *
* Input: To tell which state batter saver mode should be set to, add the * {@link #EXTRA_BATTERY_SAVER_MODE_ENABLED} extra to this Intent with the state specified. * If the extra is not included, no changes will be made. *
* Output: Nothing. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_VOICE_CONTROL_BATTERY_SAVER_MODE = "android.settings.VOICE_CONTROL_BATTERY_SAVER_MODE"; /** * Activity Action: Show Home selection settings. If there are multiple activities * that can satisfy the {@link Intent#CATEGORY_HOME} intent, this screen allows you * to pick your preferred activity. */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_HOME_SETTINGS = "android.settings.HOME_SETTINGS"; /** * Activity Action: Show notification settings. * * @hide */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_NOTIFICATION_SETTINGS = "android.settings.NOTIFICATION_SETTINGS"; /** * Activity Action: Show notification settings for a single app. * * @hide */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_APP_NOTIFICATION_SETTINGS = "android.settings.APP_NOTIFICATION_SETTINGS"; /** * Activity Action: Show notification redaction settings. * * @hide */ @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) public static final String ACTION_APP_NOTIFICATION_REDACTION = "android.settings.ACTION_APP_NOTIFICATION_REDACTION"; /** @hide */ public static final String EXTRA_APP_UID = "app_uid"; /** @hide */ public static final String EXTRA_APP_PACKAGE = "app_package"; // End of Intent actions for Settings /** * @hide - Private call() method on SettingsProvider to read from 'system' table. */ public static final String CALL_METHOD_GET_SYSTEM = "GET_system"; /** * @hide - Private call() method on SettingsProvider to read from 'secure' table. */ public static final String CALL_METHOD_GET_SECURE = "GET_secure"; /** * @hide - Private call() method on SettingsProvider to read from 'global' table. */ public static final String CALL_METHOD_GET_GLOBAL = "GET_global"; /** * @hide - User handle argument extra to the fast-path call()-based requests */ public static final String CALL_METHOD_USER_KEY = "_user"; /** @hide - Private call() method to write to 'system' table */ public static final String CALL_METHOD_PUT_SYSTEM = "PUT_system"; /** @hide - Private call() method to write to 'secure' table */ public static final String CALL_METHOD_PUT_SECURE = "PUT_secure"; /** @hide - Private call() method to write to 'global' table */ public static final String CALL_METHOD_PUT_GLOBAL= "PUT_global"; /** * Activity Extra: Limit available options in launched activity based on the given authority. *
* This can be passed as an extra field in an Activity Intent with one or more syncable content * provider's authorities as a String[]. This field is used by some intents to alter the * behavior of the called activity. *
* Example: The {@link #ACTION_ADD_ACCOUNT} intent restricts the account types available based * on the authority given. */ public static final String EXTRA_AUTHORITIES = "authorities"; /** * Activity Extra: Limit available options in launched activity based on the given account * types. *
* This can be passed as an extra field in an Activity Intent with one or more account types * as a String[]. This field is used by some intents to alter the behavior of the called * activity. *
* Example: The {@link #ACTION_ADD_ACCOUNT} intent restricts the account types to the specified * list. */ public static final String EXTRA_ACCOUNT_TYPES = "account_types"; public static final String EXTRA_INPUT_METHOD_ID = "input_method_id"; /** * Activity Extra: The device identifier to act upon. *
* This can be passed as an extra field in an Activity Intent with a single * InputDeviceIdentifier. This field is used by some activities to jump straight into the * settings for the given device. *
* Example: The {@link #ACTION_INPUT_METHOD_SETTINGS} intent opens the keyboard layout * dialog for the given device. * @hide */ public static final String EXTRA_INPUT_DEVICE_IDENTIFIER = "input_device_identifier"; /** * Activity Extra: Enable or disable Airplane Mode. *
* This can be passed as an extra field to the {@link #ACTION_VOICE_CONTROL_AIRPLANE_MODE} * intent as a boolean to indicate if it should be enabled. */ public static final String EXTRA_AIRPLANE_MODE_ENABLED = "airplane_mode_enabled"; /** * Activity Extra: Enable or disable Battery saver mode. *
* This can be passed as an extra field to the {@link #ACTION_VOICE_CONTROL_BATTERY_SAVER_MODE} * intent as a boolean to indicate if it should be enabled. */ public static final String EXTRA_BATTERY_SAVER_MODE_ENABLED = "android.settings.extra.battery_saver_mode_enabled"; /** * Activity Extra: Enable or disable Do Not Disturb mode. *
* This can be passed as an extra field to the {@link #ACTION_VOICE_CONTROL_DO_NOT_DISTURB_MODE} * intent as a boolean to indicate if it should be enabled. */ public static final String EXTRA_DO_NOT_DISTURB_MODE_ENABLED = "android.settings.extra.do_not_disturb_mode_enabled"; /** * Activity Extra: How many minutes to enable do not disturb mode for. *
* This can be passed as an extra field to the {@link #ACTION_VOICE_CONTROL_DO_NOT_DISTURB_MODE}
* intent to indicate how long do not disturb mode should be enabled for.
*/
public static final String EXTRA_DO_NOT_DISTURB_MODE_MINUTES =
"android.settings.extra.do_not_disturb_mode_minutes";
private static final String JID_RESOURCE_PREFIX = "android";
public static final String AUTHORITY = "settings";
private static final String TAG = "Settings";
private static final boolean LOCAL_LOGV = false;
// Lock ensures that when enabling/disabling the master location switch, we don't end up
// with a partial enable/disable state in multi-threaded situations.
private static final Object mLocationSettingsLock = new Object();
public static class SettingNotFoundException extends AndroidException {
public SettingNotFoundException(String msg) {
super(msg);
}
}
/**
* Common base for tables of name/value settings.
*/
public static class NameValueTable implements BaseColumns {
public static final String NAME = "name";
public static final String VALUE = "value";
protected static boolean putString(ContentResolver resolver, Uri uri,
String name, String value) {
// The database will take care of replacing duplicates.
try {
ContentValues values = new ContentValues();
values.put(NAME, name);
values.put(VALUE, value);
resolver.insert(uri, values);
return true;
} catch (SQLException e) {
Log.w(TAG, "Can't set key " + name + " in " + uri, e);
return false;
}
}
public static Uri getUriFor(Uri uri, String name) {
return Uri.withAppendedPath(uri, name);
}
}
// Thread-safe.
private static class NameValueCache {
private final String mVersionSystemProperty;
private final Uri mUri;
private static final String[] SELECT_VALUE =
new String[] { Settings.NameValueTable.VALUE };
private static final String NAME_EQ_PLACEHOLDER = "name=?";
// Must synchronize on 'this' to access mValues and mValuesVersion.
private final HashMap
* This version does not take a default value. If the setting has not
* been set, or the string value is not a number,
* it throws {@link SettingNotFoundException}.
*
* @param cr The ContentResolver to access.
* @param name The name of the setting to retrieve.
*
* @throws SettingNotFoundException Thrown if a setting by the given
* name can't be found or the setting value is not an integer.
*
* @return The setting's current value.
*/
public static int getInt(ContentResolver cr, String name)
throws SettingNotFoundException {
return getIntForUser(cr, name, UserHandle.myUserId());
}
/** @hide */
public static int getIntForUser(ContentResolver cr, String name, int userHandle)
throws SettingNotFoundException {
String v = getStringForUser(cr, name, userHandle);
try {
return Integer.parseInt(v);
} catch (NumberFormatException e) {
throw new SettingNotFoundException(name);
}
}
/**
* Convenience function for updating a single settings value as an
* integer. This will either create a new entry in the table if the
* given name does not exist, or modify the value of the existing row
* with that name. Note that internally setting values are always
* stored as strings, so this function converts the given value to a
* string before storing it.
*
* @param cr The ContentResolver to access.
* @param name The name of the setting to modify.
* @param value The new value for the setting.
* @return true if the value was set, false on database errors
*/
public static boolean putInt(ContentResolver cr, String name, int value) {
return putIntForUser(cr, name, value, UserHandle.myUserId());
}
/** @hide */
public static boolean putIntForUser(ContentResolver cr, String name, int value,
int userHandle) {
return putStringForUser(cr, name, Integer.toString(value), userHandle);
}
/**
* Convenience function for retrieving a single system settings value
* as a {@code long}. Note that internally setting values are always
* stored as strings; this function converts the string to a {@code long}
* for you. The default value will be returned if the setting is
* not defined or not a {@code long}.
*
* @param cr The ContentResolver to access.
* @param name The name of the setting to retrieve.
* @param def Value to return if the setting is not defined.
*
* @return The setting's current value, or 'def' if it is not defined
* or not a valid {@code long}.
*/
public static long getLong(ContentResolver cr, String name, long def) {
return getLongForUser(cr, name, def, UserHandle.myUserId());
}
/** @hide */
public static long getLongForUser(ContentResolver cr, String name, long def,
int userHandle) {
String valString = getStringForUser(cr, name, userHandle);
long value;
try {
value = valString != null ? Long.parseLong(valString) : def;
} catch (NumberFormatException e) {
value = def;
}
return value;
}
/**
* Convenience function for retrieving a single system settings value
* as a {@code long}. Note that internally setting values are always
* stored as strings; this function converts the string to a {@code long}
* for you.
*
* This version does not take a default value. If the setting has not
* been set, or the string value is not a number,
* it throws {@link SettingNotFoundException}.
*
* @param cr The ContentResolver to access.
* @param name The name of the setting to retrieve.
*
* @return The setting's current value.
* @throws SettingNotFoundException Thrown if a setting by the given
* name can't be found or the setting value is not an integer.
*/
public static long getLong(ContentResolver cr, String name)
throws SettingNotFoundException {
return getLongForUser(cr, name, UserHandle.myUserId());
}
/** @hide */
public static long getLongForUser(ContentResolver cr, String name, int userHandle)
throws SettingNotFoundException {
String valString = getStringForUser(cr, name, userHandle);
try {
return Long.parseLong(valString);
} catch (NumberFormatException e) {
throw new SettingNotFoundException(name);
}
}
/**
* Convenience function for updating a single settings value as a long
* integer. This will either create a new entry in the table if the
* given name does not exist, or modify the value of the existing row
* with that name. Note that internally setting values are always
* stored as strings, so this function converts the given value to a
* string before storing it.
*
* @param cr The ContentResolver to access.
* @param name The name of the setting to modify.
* @param value The new value for the setting.
* @return true if the value was set, false on database errors
*/
public static boolean putLong(ContentResolver cr, String name, long value) {
return putLongForUser(cr, name, value, UserHandle.myUserId());
}
/** @hide */
public static boolean putLongForUser(ContentResolver cr, String name, long value,
int userHandle) {
return putStringForUser(cr, name, Long.toString(value), userHandle);
}
/**
* Convenience function for retrieving a single system settings value
* as a floating point number. Note that internally setting values are
* always stored as strings; this function converts the string to an
* float for you. The default value will be returned if the setting
* is not defined or not a valid float.
*
* @param cr The ContentResolver to access.
* @param name The name of the setting to retrieve.
* @param def Value to return if the setting is not defined.
*
* @return The setting's current value, or 'def' if it is not defined
* or not a valid float.
*/
public static float getFloat(ContentResolver cr, String name, float def) {
return getFloatForUser(cr, name, def, UserHandle.myUserId());
}
/** @hide */
public static float getFloatForUser(ContentResolver cr, String name, float def,
int userHandle) {
String v = getStringForUser(cr, name, userHandle);
try {
return v != null ? Float.parseFloat(v) : def;
} catch (NumberFormatException e) {
return def;
}
}
/**
* Convenience function for retrieving a single system settings value
* as a float. Note that internally setting values are always
* stored as strings; this function converts the string to a float
* for you.
*
* This version does not take a default value. If the setting has not
* been set, or the string value is not a number,
* it throws {@link SettingNotFoundException}.
*
* @param cr The ContentResolver to access.
* @param name The name of the setting to retrieve.
*
* @throws SettingNotFoundException Thrown if a setting by the given
* name can't be found or the setting value is not a float.
*
* @return The setting's current value.
*/
public static float getFloat(ContentResolver cr, String name)
throws SettingNotFoundException {
return getFloatForUser(cr, name, UserHandle.myUserId());
}
/** @hide */
public static float getFloatForUser(ContentResolver cr, String name, int userHandle)
throws SettingNotFoundException {
String v = getStringForUser(cr, name, userHandle);
if (v == null) {
throw new SettingNotFoundException(name);
}
try {
return Float.parseFloat(v);
} catch (NumberFormatException e) {
throw new SettingNotFoundException(name);
}
}
/**
* Convenience function for updating a single settings value as a
* floating point number. This will either create a new entry in the
* table if the given name does not exist, or modify the value of the
* existing row with that name. Note that internally setting values
* are always stored as strings, so this function converts the given
* value to a string before storing it.
*
* @param cr The ContentResolver to access.
* @param name The name of the setting to modify.
* @param value The new value for the setting.
* @return true if the value was set, false on database errors
*/
public static boolean putFloat(ContentResolver cr, String name, float value) {
return putFloatForUser(cr, name, value, UserHandle.myUserId());
}
/** @hide */
public static boolean putFloatForUser(ContentResolver cr, String name, float value,
int userHandle) {
return putStringForUser(cr, name, Float.toString(value), userHandle);
}
/**
* Convenience function to read all of the current
* configuration-related settings into a
* {@link Configuration} object.
*
* @param cr The ContentResolver to access.
* @param outConfig Where to place the configuration settings.
*/
public static void getConfiguration(ContentResolver cr, Configuration outConfig) {
getConfigurationForUser(cr, outConfig, UserHandle.myUserId());
}
/** @hide */
public static void getConfigurationForUser(ContentResolver cr, Configuration outConfig,
int userHandle) {
outConfig.fontScale = Settings.System.getFloatForUser(
cr, FONT_SCALE, outConfig.fontScale, userHandle);
if (outConfig.fontScale < 0) {
outConfig.fontScale = 1;
}
}
/**
* @hide Erase the fields in the Configuration that should be applied
* by the settings.
*/
public static void clearConfiguration(Configuration inoutConfig) {
inoutConfig.fontScale = 0;
}
/**
* Convenience function to write a batch of configuration-related
* settings from a {@link Configuration} object.
*
* @param cr The ContentResolver to access.
* @param config The settings to write.
* @return true if the values were set, false on database errors
*/
public static boolean putConfiguration(ContentResolver cr, Configuration config) {
return putConfigurationForUser(cr, config, UserHandle.myUserId());
}
/** @hide */
public static boolean putConfigurationForUser(ContentResolver cr, Configuration config,
int userHandle) {
return Settings.System.putFloatForUser(cr, FONT_SCALE, config.fontScale, userHandle);
}
/** @hide */
public static boolean hasInterestingConfigurationChanges(int changes) {
return (changes&ActivityInfo.CONFIG_FONT_SCALE) != 0;
}
/** @deprecated - Do not use */
@Deprecated
public static boolean getShowGTalkServiceStatus(ContentResolver cr) {
return getShowGTalkServiceStatusForUser(cr, UserHandle.myUserId());
}
/**
* @hide
* @deprecated - Do not use
*/
public static boolean getShowGTalkServiceStatusForUser(ContentResolver cr,
int userHandle) {
return getIntForUser(cr, SHOW_GTALK_SERVICE_STATUS, 0, userHandle) != 0;
}
/** @deprecated - Do not use */
@Deprecated
public static void setShowGTalkServiceStatus(ContentResolver cr, boolean flag) {
setShowGTalkServiceStatusForUser(cr, flag, UserHandle.myUserId());
}
/**
* @hide
* @deprecated - Do not use
*/
@Deprecated
public static void setShowGTalkServiceStatusForUser(ContentResolver cr, boolean flag,
int userHandle) {
putIntForUser(cr, SHOW_GTALK_SERVICE_STATUS, flag ? 1 : 0, userHandle);
}
private static final class DiscreteValueValidator implements Validator {
private final String[] mValues;
public DiscreteValueValidator(String[] values) {
mValues = values;
}
@Override
public boolean validate(String value) {
return ArrayUtils.contains(mValues, value);
}
}
private static final class InclusiveIntegerRangeValidator implements Validator {
private final int mMin;
private final int mMax;
public InclusiveIntegerRangeValidator(int min, int max) {
mMin = min;
mMax = max;
}
@Override
public boolean validate(String value) {
try {
final int intValue = Integer.parseInt(value);
return intValue >= mMin && intValue <= mMax;
} catch (NumberFormatException e) {
return false;
}
}
}
private static final class InclusiveFloatRangeValidator implements Validator {
private final float mMin;
private final float mMax;
public InclusiveFloatRangeValidator(float min, float max) {
mMin = min;
mMax = max;
}
@Override
public boolean validate(String value) {
try {
final float floatValue = Float.parseFloat(value);
return floatValue >= mMin && floatValue <= mMax;
} catch (NumberFormatException e) {
return false;
}
}
}
/**
* @deprecated Use {@link android.provider.Settings.Global#STAY_ON_WHILE_PLUGGED_IN} instead
*/
@Deprecated
public static final String STAY_ON_WHILE_PLUGGED_IN = Global.STAY_ON_WHILE_PLUGGED_IN;
/**
* What happens when the user presses the end call button if they're not
* on a call.
* Set to 1 for true and 0 for false.
*
* @deprecated Use {@link WifiManager} instead
*/
@Deprecated
public static final String WIFI_USE_STATIC_IP = "wifi_use_static_ip";
private static final Validator WIFI_USE_STATIC_IP_VALIDATOR = sBooleanValidator;
/**
* The static IP address.
*
* Example: "192.168.1.51"
*
* @deprecated Use {@link WifiManager} instead
*/
@Deprecated
public static final String WIFI_STATIC_IP = "wifi_static_ip";
private static final Validator WIFI_STATIC_IP_VALIDATOR = sLenientIpAddressValidator;
/**
* If using static IP, the gateway's IP address.
*
* Example: "192.168.1.1"
*
* @deprecated Use {@link WifiManager} instead
*/
@Deprecated
public static final String WIFI_STATIC_GATEWAY = "wifi_static_gateway";
private static final Validator WIFI_STATIC_GATEWAY_VALIDATOR = sLenientIpAddressValidator;
/**
* If using static IP, the net mask.
*
* Example: "255.255.255.0"
*
* @deprecated Use {@link WifiManager} instead
*/
@Deprecated
public static final String WIFI_STATIC_NETMASK = "wifi_static_netmask";
private static final Validator WIFI_STATIC_NETMASK_VALIDATOR = sLenientIpAddressValidator;
/**
* If using static IP, the primary DNS's IP address.
*
* Example: "192.168.1.1"
*
* @deprecated Use {@link WifiManager} instead
*/
@Deprecated
public static final String WIFI_STATIC_DNS1 = "wifi_static_dns1";
private static final Validator WIFI_STATIC_DNS1_VALIDATOR = sLenientIpAddressValidator;
/**
* If using static IP, the secondary DNS's IP address.
*
* Example: "192.168.1.2"
*
* @deprecated Use {@link WifiManager} instead
*/
@Deprecated
public static final String WIFI_STATIC_DNS2 = "wifi_static_dns2";
private static final Validator WIFI_STATIC_DNS2_VALIDATOR = sLenientIpAddressValidator;
/**
* Determines whether remote devices may discover and/or connect to
* this device.
* Type: INT
* Note: This is a one-off setting that will be removed in the future
* when there is profile support. For this reason, it is kept hidden
* from the public APIs.
*
* @hide
* @deprecated
*/
@Deprecated
public static final String NOTIFICATIONS_USE_RING_VOLUME =
"notifications_use_ring_volume";
private static final Validator NOTIFICATIONS_USE_RING_VOLUME_VALIDATOR = sBooleanValidator;
/**
* Whether silent mode should allow vibration feedback. This is used
* internally in AudioService and the Sound settings activity to
* coordinate decoupling of vibrate and silent modes. This setting
* will likely be removed in a future release with support for
* audio/vibe feedback profiles.
*
* Not used anymore. On devices with vibrator, the user explicitly selects
* silent or vibrate mode.
* Kept for use by legacy database upgrade code in DatabaseHelper.
* @hide
*/
public static final String VIBRATE_IN_SILENT = "vibrate_in_silent";
private static final Validator VIBRATE_IN_SILENT_VALIDATOR = sBooleanValidator;
/**
* The mapping of stream type (integer) to its setting.
*
* @removed Not used by anything since API 2.
*/
public static final String[] VOLUME_SETTINGS = {
VOLUME_VOICE, VOLUME_SYSTEM, VOLUME_RING, VOLUME_MUSIC,
VOLUME_ALARM, VOLUME_NOTIFICATION, VOLUME_BLUETOOTH_SCO
};
/**
* Appended to various volume related settings to record the previous
* values before they the settings were affected by a silent/vibrate
* ringer mode change.
*
* @removed Not used by anything since API 2.
*/
public static final String APPEND_FOR_LAST_AUDIBLE = "_last_audible";
/**
* Persistent store for the system-wide default ringtone URI.
*
* If you need to play the default ringtone at any given time, it is recommended
* you give {@link #DEFAULT_RINGTONE_URI} to the media player. It will resolve
* to the set default ringtone at the time of playing.
*
* @see #DEFAULT_RINGTONE_URI
*/
public static final String RINGTONE = "ringtone";
private static final Validator RINGTONE_VALIDATOR = sUriValidator;
/**
* A {@link Uri} that will point to the current default ringtone at any
* given time.
*
* If the current default ringtone is in the DRM provider and the caller
* does not have permission, the exception will be a
* FileNotFoundException.
*/
public static final Uri DEFAULT_RINGTONE_URI = getUriFor(RINGTONE);
/**
* Persistent store for the system-wide default notification sound.
*
* @see #RINGTONE
* @see #DEFAULT_NOTIFICATION_URI
*/
public static final String NOTIFICATION_SOUND = "notification_sound";
private static final Validator NOTIFICATION_SOUND_VALIDATOR = sUriValidator;
/**
* A {@link Uri} that will point to the current default notification
* sound at any given time.
*
* @see #DEFAULT_RINGTONE_URI
*/
public static final Uri DEFAULT_NOTIFICATION_URI = getUriFor(NOTIFICATION_SOUND);
/**
* Persistent store for the system-wide default alarm alert.
*
* @see #RINGTONE
* @see #DEFAULT_ALARM_ALERT_URI
*/
public static final String ALARM_ALERT = "alarm_alert";
private static final Validator ALARM_ALERT_VALIDATOR = sUriValidator;
/**
* A {@link Uri} that will point to the current default alarm alert at
* any given time.
*
* @see #DEFAULT_ALARM_ALERT_URI
*/
public static final Uri DEFAULT_ALARM_ALERT_URI = getUriFor(ALARM_ALERT);
/**
* Persistent store for the system default media button event receiver.
*
* @hide
*/
public static final String MEDIA_BUTTON_RECEIVER = "media_button_receiver";
private static final Validator MEDIA_BUTTON_RECEIVER_VALIDATOR = new Validator() {
@Override
public boolean validate(String value) {
try {
ComponentName.unflattenFromString(value);
return true;
} catch (NullPointerException e) {
return false;
}
}
};
/**
* Setting to enable Auto Replace (AutoText) in text editors. 1 = On, 0 = Off
*/
public static final String TEXT_AUTO_REPLACE = "auto_replace";
private static final Validator TEXT_AUTO_REPLACE_VALIDATOR = sBooleanValidator;
/**
* Setting to enable Auto Caps in text editors. 1 = On, 0 = Off
*/
public static final String TEXT_AUTO_CAPS = "auto_caps";
private static final Validator TEXT_AUTO_CAPS_VALIDATOR = sBooleanValidator;
/**
* Setting to enable Auto Punctuate in text editors. 1 = On, 0 = Off. This
* feature converts two spaces to a "." and space.
*/
public static final String TEXT_AUTO_PUNCTUATE = "auto_punctuate";
private static final Validator TEXT_AUTO_PUNCTUATE_VALIDATOR = sBooleanValidator;
/**
* Setting to showing password characters in text editors. 1 = On, 0 = Off
*/
public static final String TEXT_SHOW_PASSWORD = "show_password";
private static final Validator TEXT_SHOW_PASSWORD_VALIDATOR = sBooleanValidator;
public static final String SHOW_GTALK_SERVICE_STATUS =
"SHOW_GTALK_SERVICE_STATUS";
private static final Validator SHOW_GTALK_SERVICE_STATUS_VALIDATOR = sBooleanValidator;
/**
* Name of activity to use for wallpaper on the home screen.
*
* @deprecated Use {@link WallpaperManager} instead.
*/
@Deprecated
public static final String WALLPAPER_ACTIVITY = "wallpaper_activity";
private static final Validator WALLPAPER_ACTIVITY_VALIDATOR = new Validator() {
private static final int MAX_LENGTH = 1000;
@Override
public boolean validate(String value) {
if (value != null && value.length() > MAX_LENGTH) {
return false;
}
return ComponentName.unflattenFromString(value) != null;
}
};
/**
* @deprecated Use {@link android.provider.Settings.Global#AUTO_TIME}
* instead
*/
@Deprecated
public static final String AUTO_TIME = Global.AUTO_TIME;
/**
* @deprecated Use {@link android.provider.Settings.Global#AUTO_TIME_ZONE}
* instead
*/
@Deprecated
public static final String AUTO_TIME_ZONE = Global.AUTO_TIME_ZONE;
/**
* Display times as 12 or 24 hours
* 12
* 24
*/
public static final String TIME_12_24 = "time_12_24";
/** @hide */
public static final Validator TIME_12_24_VALIDATOR =
new DiscreteValueValidator(new String[] {"12", "24"});
/**
* Date format string
* mm/dd/yyyy
* dd/mm/yyyy
* yyyy/mm/dd
*/
public static final String DATE_FORMAT = "date_format";
/** @hide */
public static final Validator DATE_FORMAT_VALIDATOR = new Validator() {
@Override
public boolean validate(String value) {
try {
new SimpleDateFormat(value);
return true;
} catch (IllegalArgumentException e) {
return false;
}
}
};
/**
* Whether the setup wizard has been run before (on first boot), or if
* it still needs to be run.
*
* nonzero = it has been run in the past
* 0 = it has not been run in the past
*/
public static final String SETUP_WIZARD_HAS_RUN = "setup_wizard_has_run";
/** @hide */
public static final Validator SETUP_WIZARD_HAS_RUN_VALIDATOR = sBooleanValidator;
/**
* Scaling factor for normal window animations. Setting to 0 will disable window
* animations.
*
* @deprecated Use {@link Global#WINDOW_ANIMATION_SCALE} instead
*/
@Deprecated
public static final String WINDOW_ANIMATION_SCALE = Global.WINDOW_ANIMATION_SCALE;
/**
* Scaling factor for activity transition animations. Setting to 0 will disable window
* animations.
*
* @deprecated Use {@link Global#TRANSITION_ANIMATION_SCALE} instead
*/
@Deprecated
public static final String TRANSITION_ANIMATION_SCALE = Global.TRANSITION_ANIMATION_SCALE;
/**
* Scaling factor for Animator-based animations. This affects both the start delay and
* duration of all such animations. Setting to 0 will cause animations to end immediately.
* The default value is 1.
*
* @deprecated Use {@link Global#ANIMATOR_DURATION_SCALE} instead
*/
@Deprecated
public static final String ANIMATOR_DURATION_SCALE = Global.ANIMATOR_DURATION_SCALE;
/**
* Control whether the accelerometer will be used to change screen
* orientation. If 0, it will not be used unless explicitly requested
* by the application; if 1, it will be used by default unless explicitly
* disabled by the application.
*/
public static final String ACCELEROMETER_ROTATION = "accelerometer_rotation";
/** @hide */
public static final Validator ACCELEROMETER_ROTATION_VALIDATOR = sBooleanValidator;
/**
* Default screen rotation when no other policy applies.
* When {@link #ACCELEROMETER_ROTATION} is zero and no on-screen Activity expresses a
* preference, this rotation value will be used. Must be one of the
* {@link android.view.Surface#ROTATION_0 Surface rotation constants}.
*
* @see android.view.Display#getRotation
*/
public static final String USER_ROTATION = "user_rotation";
/** @hide */
public static final Validator USER_ROTATION_VALIDATOR =
new InclusiveIntegerRangeValidator(0, 3);
/**
* Control whether the rotation lock toggle in the System UI should be hidden.
* Typically this is done for accessibility purposes to make it harder for
* the user to accidentally toggle the rotation lock while the display rotation
* has been locked for accessibility.
*
* If 0, then rotation lock toggle is not hidden for accessibility (although it may be
* unavailable for other reasons). If 1, then the rotation lock toggle is hidden.
*
* @hide
*/
public static final String HIDE_ROTATION_LOCK_TOGGLE_FOR_ACCESSIBILITY =
"hide_rotation_lock_toggle_for_accessibility";
/** @hide */
public static final Validator HIDE_ROTATION_LOCK_TOGGLE_FOR_ACCESSIBILITY_VALIDATOR =
sBooleanValidator;
/**
* Whether the phone vibrates when it is ringing due to an incoming call. This will
* be used by Phone and Setting apps; it shouldn't affect other apps.
* The value is boolean (1 or 0).
*
* Note: this is not same as "vibrate on ring", which had been available until ICS.
* It was about AudioManager's setting and thus affected all the applications which
* relied on the setting, while this is purely about the vibration setting for incoming
* calls.
*/
public static final String VIBRATE_WHEN_RINGING = "vibrate_when_ringing";
/** @hide */
public static final Validator VIBRATE_WHEN_RINGING_VALIDATOR = sBooleanValidator;
/**
* Whether the audible DTMF tones are played by the dialer when dialing. The value is
* boolean (1 or 0).
*/
public static final String DTMF_TONE_WHEN_DIALING = "dtmf_tone";
/** @hide */
public static final Validator DTMF_TONE_WHEN_DIALING_VALIDATOR = sBooleanValidator;
/**
* CDMA only settings
* DTMF tone type played by the dialer when dialing.
* 0 = Normal
* 1 = Long
*/
public static final String DTMF_TONE_TYPE_WHEN_DIALING = "dtmf_tone_type";
/** @hide */
public static final Validator DTMF_TONE_TYPE_WHEN_DIALING_VALIDATOR = sBooleanValidator;
/**
* Whether the hearing aid is enabled. The value is
* boolean (1 or 0).
* @hide
*/
public static final String HEARING_AID = "hearing_aid";
/** @hide */
public static final Validator HEARING_AID_VALIDATOR = sBooleanValidator;
/**
* CDMA only settings
* TTY Mode
* 0 = OFF
* 1 = FULL
* 2 = VCO
* 3 = HCO
* @hide
*/
public static final String TTY_MODE = "tty_mode";
/** @hide */
public static final Validator TTY_MODE_VALIDATOR = new InclusiveIntegerRangeValidator(0, 3);
/**
* Whether the sounds effects (key clicks, lid open ...) are enabled. The value is
* boolean (1 or 0).
*/
public static final String SOUND_EFFECTS_ENABLED = "sound_effects_enabled";
/** @hide */
public static final Validator SOUND_EFFECTS_ENABLED_VALIDATOR = sBooleanValidator;
/**
* Whether the haptic feedback (long presses, ...) are enabled. The value is
* boolean (1 or 0).
*/
public static final String HAPTIC_FEEDBACK_ENABLED = "haptic_feedback_enabled";
/** @hide */
public static final Validator HAPTIC_FEEDBACK_ENABLED_VALIDATOR = sBooleanValidator;
/**
* @deprecated Each application that shows web suggestions should have its own
* setting for this.
*/
@Deprecated
public static final String SHOW_WEB_SUGGESTIONS = "show_web_suggestions";
/** @hide */
public static final Validator SHOW_WEB_SUGGESTIONS_VALIDATOR = sBooleanValidator;
/**
* Whether the notification LED should repeatedly flash when a notification is
* pending. The value is boolean (1 or 0).
* @hide
*/
public static final String NOTIFICATION_LIGHT_PULSE = "notification_light_pulse";
/** @hide */
public static final Validator NOTIFICATION_LIGHT_PULSE_VALIDATOR = sBooleanValidator;
/**
* Show pointer location on screen?
* 0 = no
* 1 = yes
* @hide
*/
public static final String POINTER_LOCATION = "pointer_location";
/** @hide */
public static final Validator POINTER_LOCATION_VALIDATOR = sBooleanValidator;
/**
* Show touch positions on screen?
* 0 = no
* 1 = yes
* @hide
*/
public static final String SHOW_TOUCHES = "show_touches";
/** @hide */
public static final Validator SHOW_TOUCHES_VALIDATOR = sBooleanValidator;
/**
* Log raw orientation data from
* {@link com.android.server.policy.WindowOrientationListener} for use with the
* orientationplot.py tool.
* 0 = no
* 1 = yes
* @hide
*/
public static final String WINDOW_ORIENTATION_LISTENER_LOG =
"window_orientation_listener_log";
/** @hide */
public static final Validator WINDOW_ORIENTATION_LISTENER_LOG_VALIDATOR = sBooleanValidator;
/**
* @deprecated Use {@link android.provider.Settings.Global#POWER_SOUNDS_ENABLED}
* instead
* @hide
*/
@Deprecated
public static final String POWER_SOUNDS_ENABLED = Global.POWER_SOUNDS_ENABLED;
/**
* @deprecated Use {@link android.provider.Settings.Global#DOCK_SOUNDS_ENABLED}
* instead
* @hide
*/
@Deprecated
public static final String DOCK_SOUNDS_ENABLED = Global.DOCK_SOUNDS_ENABLED;
/**
* Whether to play sounds when the keyguard is shown and dismissed.
* @hide
*/
public static final String LOCKSCREEN_SOUNDS_ENABLED = "lockscreen_sounds_enabled";
/** @hide */
public static final Validator LOCKSCREEN_SOUNDS_ENABLED_VALIDATOR = sBooleanValidator;
/**
* Whether the lockscreen should be completely disabled.
* @hide
*/
public static final String LOCKSCREEN_DISABLED = "lockscreen.disabled";
/** @hide */
public static final Validator LOCKSCREEN_DISABLED_VALIDATOR = sBooleanValidator;
/**
* @deprecated Use {@link android.provider.Settings.Global#LOW_BATTERY_SOUND}
* instead
* @hide
*/
@Deprecated
public static final String LOW_BATTERY_SOUND = Global.LOW_BATTERY_SOUND;
/**
* @deprecated Use {@link android.provider.Settings.Global#DESK_DOCK_SOUND}
* instead
* @hide
*/
@Deprecated
public static final String DESK_DOCK_SOUND = Global.DESK_DOCK_SOUND;
/**
* @deprecated Use {@link android.provider.Settings.Global#DESK_UNDOCK_SOUND}
* instead
* @hide
*/
@Deprecated
public static final String DESK_UNDOCK_SOUND = Global.DESK_UNDOCK_SOUND;
/**
* @deprecated Use {@link android.provider.Settings.Global#CAR_DOCK_SOUND}
* instead
* @hide
*/
@Deprecated
public static final String CAR_DOCK_SOUND = Global.CAR_DOCK_SOUND;
/**
* @deprecated Use {@link android.provider.Settings.Global#CAR_UNDOCK_SOUND}
* instead
* @hide
*/
@Deprecated
public static final String CAR_UNDOCK_SOUND = Global.CAR_UNDOCK_SOUND;
/**
* @deprecated Use {@link android.provider.Settings.Global#LOCK_SOUND}
* instead
* @hide
*/
@Deprecated
public static final String LOCK_SOUND = Global.LOCK_SOUND;
/**
* @deprecated Use {@link android.provider.Settings.Global#UNLOCK_SOUND}
* instead
* @hide
*/
@Deprecated
public static final String UNLOCK_SOUND = Global.UNLOCK_SOUND;
/**
* Receive incoming SIP calls?
* 0 = no
* 1 = yes
* @hide
*/
public static final String SIP_RECEIVE_CALLS = "sip_receive_calls";
/** @hide */
public static final Validator SIP_RECEIVE_CALLS_VALIDATOR = sBooleanValidator;
/**
* Call Preference String.
* "SIP_ALWAYS" : Always use SIP with network access
* "SIP_ADDRESS_ONLY" : Only if destination is a SIP address
* @hide
*/
public static final String SIP_CALL_OPTIONS = "sip_call_options";
/** @hide */
public static final Validator SIP_CALL_OPTIONS_VALIDATOR = new DiscreteValueValidator(
new String[] {"SIP_ALWAYS", "SIP_ADDRESS_ONLY"});
/**
* One of the sip call options: Always use SIP with network access.
* @hide
*/
public static final String SIP_ALWAYS = "SIP_ALWAYS";
/** @hide */
public static final Validator SIP_ALWAYS_VALIDATOR = sBooleanValidator;
/**
* One of the sip call options: Only if destination is a SIP address.
* @hide
*/
public static final String SIP_ADDRESS_ONLY = "SIP_ADDRESS_ONLY";
/** @hide */
public static final Validator SIP_ADDRESS_ONLY_VALIDATOR = sBooleanValidator;
/**
* @deprecated Use SIP_ALWAYS or SIP_ADDRESS_ONLY instead. Formerly used to indicate that
* the user should be prompted each time a call is made whether it should be placed using
* SIP. The {@link com.android.providers.settings.DatabaseHelper} replaces this with
* SIP_ADDRESS_ONLY.
* @hide
*/
@Deprecated
public static final String SIP_ASK_ME_EACH_TIME = "SIP_ASK_ME_EACH_TIME";
/** @hide */
public static final Validator SIP_ASK_ME_EACH_TIME_VALIDATOR = sBooleanValidator;
/**
* Pointer speed setting.
* This is an integer value in a range between -7 and +7, so there are 15 possible values.
* -7 = slowest
* 0 = default speed
* +7 = fastest
* @hide
*/
public static final String POINTER_SPEED = "pointer_speed";
/** @hide */
public static final Validator POINTER_SPEED_VALIDATOR =
new InclusiveFloatRangeValidator(-7, 7);
/**
* Whether lock-to-app will be triggered by long-press on recents.
* @hide
*/
public static final String LOCK_TO_APP_ENABLED = "lock_to_app_enabled";
/** @hide */
public static final Validator LOCK_TO_APP_ENABLED_VALIDATOR = sBooleanValidator;
/**
* I am the lolrus.
*
* Nonzero values indicate that the user has a bukkit.
* Backward-compatible with
* This version does not take a default value. If the setting has not
* been set, or the string value is not a number,
* it throws {@link SettingNotFoundException}.
*
* @param cr The ContentResolver to access.
* @param name The name of the setting to retrieve.
*
* @throws SettingNotFoundException Thrown if a setting by the given
* name can't be found or the setting value is not an integer.
*
* @return The setting's current value.
*/
public static int getInt(ContentResolver cr, String name)
throws SettingNotFoundException {
return getIntForUser(cr, name, UserHandle.myUserId());
}
/** @hide */
public static int getIntForUser(ContentResolver cr, String name, int userHandle)
throws SettingNotFoundException {
if (LOCATION_MODE.equals(name)) {
// HACK ALERT: temporary hack to work around b/10491283.
// TODO: once b/10491283 fixed, remove this hack
return getLocationModeForUser(cr, userHandle);
}
String v = getStringForUser(cr, name, userHandle);
try {
return Integer.parseInt(v);
} catch (NumberFormatException e) {
throw new SettingNotFoundException(name);
}
}
/**
* Convenience function for updating a single settings value as an
* integer. This will either create a new entry in the table if the
* given name does not exist, or modify the value of the existing row
* with that name. Note that internally setting values are always
* stored as strings, so this function converts the given value to a
* string before storing it.
*
* @param cr The ContentResolver to access.
* @param name The name of the setting to modify.
* @param value The new value for the setting.
* @return true if the value was set, false on database errors
*/
public static boolean putInt(ContentResolver cr, String name, int value) {
return putIntForUser(cr, name, value, UserHandle.myUserId());
}
/** @hide */
public static boolean putIntForUser(ContentResolver cr, String name, int value,
int userHandle) {
return putStringForUser(cr, name, Integer.toString(value), userHandle);
}
/**
* Convenience function for retrieving a single secure settings value
* as a {@code long}. Note that internally setting values are always
* stored as strings; this function converts the string to a {@code long}
* for you. The default value will be returned if the setting is
* not defined or not a {@code long}.
*
* @param cr The ContentResolver to access.
* @param name The name of the setting to retrieve.
* @param def Value to return if the setting is not defined.
*
* @return The setting's current value, or 'def' if it is not defined
* or not a valid {@code long}.
*/
public static long getLong(ContentResolver cr, String name, long def) {
return getLongForUser(cr, name, def, UserHandle.myUserId());
}
/** @hide */
public static long getLongForUser(ContentResolver cr, String name, long def,
int userHandle) {
String valString = getStringForUser(cr, name, userHandle);
long value;
try {
value = valString != null ? Long.parseLong(valString) : def;
} catch (NumberFormatException e) {
value = def;
}
return value;
}
/**
* Convenience function for retrieving a single secure settings value
* as a {@code long}. Note that internally setting values are always
* stored as strings; this function converts the string to a {@code long}
* for you.
*
* This version does not take a default value. If the setting has not
* been set, or the string value is not a number,
* it throws {@link SettingNotFoundException}.
*
* @param cr The ContentResolver to access.
* @param name The name of the setting to retrieve.
*
* @return The setting's current value.
* @throws SettingNotFoundException Thrown if a setting by the given
* name can't be found or the setting value is not an integer.
*/
public static long getLong(ContentResolver cr, String name)
throws SettingNotFoundException {
return getLongForUser(cr, name, UserHandle.myUserId());
}
/** @hide */
public static long getLongForUser(ContentResolver cr, String name, int userHandle)
throws SettingNotFoundException {
String valString = getStringForUser(cr, name, userHandle);
try {
return Long.parseLong(valString);
} catch (NumberFormatException e) {
throw new SettingNotFoundException(name);
}
}
/**
* Convenience function for updating a secure settings value as a long
* integer. This will either create a new entry in the table if the
* given name does not exist, or modify the value of the existing row
* with that name. Note that internally setting values are always
* stored as strings, so this function converts the given value to a
* string before storing it.
*
* @param cr The ContentResolver to access.
* @param name The name of the setting to modify.
* @param value The new value for the setting.
* @return true if the value was set, false on database errors
*/
public static boolean putLong(ContentResolver cr, String name, long value) {
return putLongForUser(cr, name, value, UserHandle.myUserId());
}
/** @hide */
public static boolean putLongForUser(ContentResolver cr, String name, long value,
int userHandle) {
return putStringForUser(cr, name, Long.toString(value), userHandle);
}
/**
* Convenience function for retrieving a single secure settings value
* as a floating point number. Note that internally setting values are
* always stored as strings; this function converts the string to an
* float for you. The default value will be returned if the setting
* is not defined or not a valid float.
*
* @param cr The ContentResolver to access.
* @param name The name of the setting to retrieve.
* @param def Value to return if the setting is not defined.
*
* @return The setting's current value, or 'def' if it is not defined
* or not a valid float.
*/
public static float getFloat(ContentResolver cr, String name, float def) {
return getFloatForUser(cr, name, def, UserHandle.myUserId());
}
/** @hide */
public static float getFloatForUser(ContentResolver cr, String name, float def,
int userHandle) {
String v = getStringForUser(cr, name, userHandle);
try {
return v != null ? Float.parseFloat(v) : def;
} catch (NumberFormatException e) {
return def;
}
}
/**
* Convenience function for retrieving a single secure settings value
* as a float. Note that internally setting values are always
* stored as strings; this function converts the string to a float
* for you.
*
* This version does not take a default value. If the setting has not
* been set, or the string value is not a number,
* it throws {@link SettingNotFoundException}.
*
* @param cr The ContentResolver to access.
* @param name The name of the setting to retrieve.
*
* @throws SettingNotFoundException Thrown if a setting by the given
* name can't be found or the setting value is not a float.
*
* @return The setting's current value.
*/
public static float getFloat(ContentResolver cr, String name)
throws SettingNotFoundException {
return getFloatForUser(cr, name, UserHandle.myUserId());
}
/** @hide */
public static float getFloatForUser(ContentResolver cr, String name, int userHandle)
throws SettingNotFoundException {
String v = getStringForUser(cr, name, userHandle);
if (v == null) {
throw new SettingNotFoundException(name);
}
try {
return Float.parseFloat(v);
} catch (NumberFormatException e) {
throw new SettingNotFoundException(name);
}
}
/**
* Convenience function for updating a single settings value as a
* floating point number. This will either create a new entry in the
* table if the given name does not exist, or modify the value of the
* existing row with that name. Note that internally setting values
* are always stored as strings, so this function converts the given
* value to a string before storing it.
*
* @param cr The ContentResolver to access.
* @param name The name of the setting to modify.
* @param value The new value for the setting.
* @return true if the value was set, false on database errors
*/
public static boolean putFloat(ContentResolver cr, String name, float value) {
return putFloatForUser(cr, name, value, UserHandle.myUserId());
}
/** @hide */
public static boolean putFloatForUser(ContentResolver cr, String name, float value,
int userHandle) {
return putStringForUser(cr, name, Float.toString(value), userHandle);
}
/**
* @deprecated Use {@link android.provider.Settings.Global#DEVELOPMENT_SETTINGS_ENABLED}
* instead
*/
@Deprecated
public static final String DEVELOPMENT_SETTINGS_ENABLED =
Global.DEVELOPMENT_SETTINGS_ENABLED;
/**
* When the user has enable the option to have a "bug report" command
* in the power menu.
* @deprecated Use {@link android.provider.Settings.Global#BUGREPORT_IN_POWER_MENU} instead
* @hide
*/
@Deprecated
public static final String BUGREPORT_IN_POWER_MENU = "bugreport_in_power_menu";
/**
* @deprecated Use {@link android.provider.Settings.Global#ADB_ENABLED} instead
*/
@Deprecated
public static final String ADB_ENABLED = Global.ADB_ENABLED;
/**
* Setting to allow mock locations and location provider status to be injected into the
* LocationManager service for testing purposes during application development. These
* locations and status values override actual location and status information generated
* by network, gps, or other location providers.
*
* @deprecated This settings is not used anymore.
*/
@Deprecated
public static final String ALLOW_MOCK_LOCATION = "mock_location";
/**
* A 64-bit number (as a hex string) that is randomly
* generated when the user first sets up the device and should remain
* constant for the lifetime of the user's device. The value may
* change if a factory reset is performed on the device.
* Note: When a device has multiple users
* (available on certain devices running Android 4.2 or higher), each user appears as a
* completely separate device, so the {@code ANDROID_ID} value is unique to each
* user. 1 = permit app installation via the system package installer intent
* 0 = do not allow use of the package installer
*/
public static final String INSTALL_NON_MARKET_APPS = "install_non_market_apps";
/**
* Comma-separated list of location providers that activities may access. Do not rely on
* this value being present in settings.db or on ContentObserver notifications on the
* corresponding Uri.
*
* @deprecated use {@link #LOCATION_MODE} and
* {@link LocationManager#MODE_CHANGED_ACTION} (or
* {@link LocationManager#PROVIDERS_CHANGED_ACTION})
*/
@Deprecated
public static final String LOCATION_PROVIDERS_ALLOWED = "location_providers_allowed";
/**
* The degree of location access enabled by the user.
*
* When used with {@link #putInt(ContentResolver, String, int)}, must be one of {@link
* #LOCATION_MODE_HIGH_ACCURACY}, {@link #LOCATION_MODE_SENSORS_ONLY}, {@link
* #LOCATION_MODE_BATTERY_SAVING}, or {@link #LOCATION_MODE_OFF}. When used with {@link
* #getInt(ContentResolver, String)}, the caller must gracefully handle additional location
* modes that might be added in the future.
*
* Note: do not rely on this value being present in settings.db or on ContentObserver
* notifications for the corresponding Uri. Use {@link LocationManager#MODE_CHANGED_ACTION}
* to receive changes in this value.
*/
public static final String LOCATION_MODE = "location_mode";
/**
* Location access disabled.
*/
public static final int LOCATION_MODE_OFF = 0;
/**
* Network Location Provider disabled, but GPS and other sensors enabled.
*/
public static final int LOCATION_MODE_SENSORS_ONLY = 1;
/**
* Reduced power usage, such as limiting the number of GPS updates per hour. Requests
* with {@link android.location.Criteria#POWER_HIGH} may be downgraded to
* {@link android.location.Criteria#POWER_MEDIUM}.
*/
public static final int LOCATION_MODE_BATTERY_SAVING = 2;
/**
* Best-effort location computation allowed.
*/
public static final int LOCATION_MODE_HIGH_ACCURACY = 3;
/**
* A flag containing settings used for biometric weak
* @hide
*/
@Deprecated
public static final String LOCK_BIOMETRIC_WEAK_FLAGS =
"lock_biometric_weak_flags";
/**
* Whether lock-to-app will lock the keyguard when exiting.
* @hide
*/
public static final String LOCK_TO_APP_EXIT_LOCKED = "lock_to_app_exit_locked";
/**
* Whether autolock is enabled (0 = false, 1 = true)
*
* @deprecated Use {@link android.app.KeyguardManager} to determine the state and security
* level of the keyguard. Accessing this setting from an app that is targeting
* {@link VERSION_CODES#M} or later throws a {@code SecurityException}.
*/
@Deprecated
public static final String LOCK_PATTERN_ENABLED = "lock_pattern_autolock";
/**
* Whether lock pattern is visible as user enters (0 = false, 1 = true)
*
* @deprecated Accessing this setting from an app that is targeting
* {@link VERSION_CODES#M} or later throws a {@code SecurityException}.
*/
@Deprecated
public static final String LOCK_PATTERN_VISIBLE = "lock_pattern_visible_pattern";
/**
* Whether lock pattern will vibrate as user enters (0 = false, 1 =
* true)
*
* @deprecated Starting in {@link VERSION_CODES#JELLY_BEAN_MR1} the
* lockscreen uses
* {@link Settings.System#HAPTIC_FEEDBACK_ENABLED}.
* Accessing this setting from an app that is targeting
* {@link VERSION_CODES#M} or later throws a {@code SecurityException}.
*/
@Deprecated
public static final String
LOCK_PATTERN_TACTILE_FEEDBACK_ENABLED = "lock_pattern_tactile_feedback_enabled";
/**
* This preference allows the device to be locked given time after screen goes off,
* subject to current DeviceAdmin policy limits.
* @hide
*/
public static final String LOCK_SCREEN_LOCK_AFTER_TIMEOUT = "lock_screen_lock_after_timeout";
/**
* This preference contains the string that shows for owner info on LockScreen.
* @hide
* @deprecated
*/
public static final String LOCK_SCREEN_OWNER_INFO = "lock_screen_owner_info";
/**
* Ids of the user-selected appwidgets on the lockscreen (comma-delimited).
* @hide
*/
@Deprecated
public static final String LOCK_SCREEN_APPWIDGET_IDS =
"lock_screen_appwidget_ids";
/**
* Id of the appwidget shown on the lock screen when appwidgets are disabled.
* @hide
*/
@Deprecated
public static final String LOCK_SCREEN_FALLBACK_APPWIDGET_ID =
"lock_screen_fallback_appwidget_id";
/**
* Index of the lockscreen appwidget to restore, -1 if none.
* @hide
*/
@Deprecated
public static final String LOCK_SCREEN_STICKY_APPWIDGET =
"lock_screen_sticky_appwidget";
/**
* This preference enables showing the owner info on LockScreen.
* @hide
* @deprecated
*/
public static final String LOCK_SCREEN_OWNER_INFO_ENABLED =
"lock_screen_owner_info_enabled";
/**
* When set by a user, allows notifications to be shown atop a securely locked screen
* in their full "private" form (same as when the device is unlocked).
* @hide
*/
public static final String LOCK_SCREEN_ALLOW_PRIVATE_NOTIFICATIONS =
"lock_screen_allow_private_notifications";
/**
* Set by the system to track if the user needs to see the call to action for
* the lockscreen notification policy.
* @hide
*/
public static final String SHOW_NOTE_ABOUT_NOTIFICATION_HIDING =
"show_note_about_notification_hiding";
/**
* Set to 1 by the system after trust agents have been initialized.
* @hide
*/
public static final String TRUST_AGENTS_INITIALIZED =
"trust_agents_initialized";
/**
* The Logging ID (a unique 64-bit value) as a hex string.
* Used as a pseudonymous identifier for logging.
* @deprecated This identifier is poorly initialized and has
* many collisions. It should not be used.
*/
@Deprecated
public static final String LOGGING_ID = "logging_id";
/**
* @deprecated Use {@link android.provider.Settings.Global#NETWORK_PREFERENCE} instead
*/
@Deprecated
public static final String NETWORK_PREFERENCE = Global.NETWORK_PREFERENCE;
/**
* No longer supported.
*/
public static final String PARENTAL_CONTROL_ENABLED = "parental_control_enabled";
/**
* No longer supported.
*/
public static final String PARENTAL_CONTROL_LAST_UPDATE = "parental_control_last_update";
/**
* No longer supported.
*/
public static final String PARENTAL_CONTROL_REDIRECT_URL = "parental_control_redirect_url";
/**
* Settings classname to launch when Settings is clicked from All
* Applications. Needed because of user testing between the old
* and new Settings apps.
*/
// TODO: 881807
public static final String SETTINGS_CLASSNAME = "settings_classname";
/**
* @deprecated Use {@link android.provider.Settings.Global#USB_MASS_STORAGE_ENABLED} instead
*/
@Deprecated
public static final String USB_MASS_STORAGE_ENABLED = Global.USB_MASS_STORAGE_ENABLED;
/**
* @deprecated Use {@link android.provider.Settings.Global#USE_GOOGLE_MAIL} instead
*/
@Deprecated
public static final String USE_GOOGLE_MAIL = Global.USE_GOOGLE_MAIL;
/**
* If accessibility is enabled.
*/
public static final String ACCESSIBILITY_ENABLED = "accessibility_enabled";
/**
* If touch exploration is enabled.
*/
public static final String TOUCH_EXPLORATION_ENABLED = "touch_exploration_enabled";
/**
* List of the enabled accessibility providers.
*/
public static final String ENABLED_ACCESSIBILITY_SERVICES =
"enabled_accessibility_services";
/**
* List of the accessibility services to which the user has granted
* permission to put the device into touch exploration mode.
*
* @hide
*/
public static final String TOUCH_EXPLORATION_GRANTED_ACCESSIBILITY_SERVICES =
"touch_exploration_granted_accessibility_services";
/**
* Whether to speak passwords while in accessibility mode.
*/
public static final String ACCESSIBILITY_SPEAK_PASSWORD = "speak_password";
/**
* Whether to draw text with high contrast while in accessibility mode.
*
* @hide
*/
public static final String ACCESSIBILITY_HIGH_TEXT_CONTRAST_ENABLED =
"high_text_contrast_enabled";
/**
* If injection of accessibility enhancing JavaScript screen-reader
* is enabled.
*
* Note: The JavaScript based screen-reader is served by the
* Google infrastructure and enable users with disabilities to
* efficiently navigate in and explore web content.
*
* This property represents a boolean value.
*
* Note: The JavaScript based screen-reader is served by the
* Google infrastructure and enable users with disabilities to
* efficiently navigate in and explore web content.
*
* This property represents a string value.
*
* Note: These key bindings are for the built-in accessibility navigation for
* web content which is used as a fall back solution if JavaScript in a WebView
* is not enabled or the user has not opted-in script injection from Google.
*
* The bindings are separated by semi-colon. A binding is a mapping from
* a key to a sequence of actions (for more details look at
* android.webkit.AccessibilityInjector). A key is represented as the hexademical
* string representation of an integer obtained from a meta state (optional) shifted
* sixteen times left and bitwise ored with a key code. An action is represented
* as a hexademical string representation of an integer where the first two digits
* are navigation action index, the second, the third, and the fourth digit pairs
* represent the action arguments. The separate actions in a binding are colon
* separated. The key and the action sequence it maps to are separated by equals.
*
* For example, the binding below maps the DPAD right button to traverse the
* current navigation axis once without firing an accessibility event and to
* perform the same traversal again but to fire an event:
*
* The goal of this binding is to enable dynamic rebinding of keys to
* navigation actions for web content without requiring a framework change.
*
* This property represents a string value.
*
* Type : int (0 to show hints, 1 to skip showing hints)
*/
public static final String SKIP_FIRST_USE_HINTS = "skip_first_use_hints";
/**
* Persisted playback time after a user confirmation of an unsafe volume level.
*
* @hide
*/
public static final String UNSAFE_VOLUME_MUSIC_ACTIVE_MS = "unsafe_volume_music_active_ms";
/**
* This preference enables notification display on the lockscreen.
* @hide
*/
public static final String LOCK_SCREEN_SHOW_NOTIFICATIONS =
"lock_screen_show_notifications";
/**
* List of TV inputs that are currently hidden. This is a string
* containing the IDs of all hidden TV inputs. Each ID is encoded by
* {@link android.net.Uri#encode(String)} and separated by ':'.
* @hide
*/
public static final String TV_INPUT_HIDDEN_INPUTS = "tv_input_hidden_inputs";
/**
* List of custom TV input labels. This is a string containing
* Use -1 to disable this timeout.
*
* Type: int
* @hide
*/
public static final String ADD_USERS_WHEN_LOCKED = "add_users_when_locked";
/**
* Setting whether the global gesture for enabling accessibility is enabled.
* If this gesture is enabled the user will be able to perfrom it to enable
* the accessibility state without visiting the settings app.
* @hide
*/
public static final String ENABLE_ACCESSIBILITY_GLOBAL_GESTURE_ENABLED =
"enable_accessibility_global_gesture_enabled";
/**
* Whether Airplane Mode is on.
*/
public static final String AIRPLANE_MODE_ON = "airplane_mode_on";
/**
* Whether Theater Mode is on.
* {@hide}
*/
@SystemApi
public static final String THEATER_MODE_ON = "theater_mode_on";
/**
* Constant for use in AIRPLANE_MODE_RADIOS to specify Bluetooth radio.
*/
public static final String RADIO_BLUETOOTH = "bluetooth";
/**
* Constant for use in AIRPLANE_MODE_RADIOS to specify Wi-Fi radio.
*/
public static final String RADIO_WIFI = "wifi";
/**
* {@hide}
*/
public static final String RADIO_WIMAX = "wimax";
/**
* Constant for use in AIRPLANE_MODE_RADIOS to specify Cellular radio.
*/
public static final String RADIO_CELL = "cell";
/**
* Constant for use in AIRPLANE_MODE_RADIOS to specify NFC radio.
*/
public static final String RADIO_NFC = "nfc";
/**
* A comma separated list of radios that need to be disabled when airplane mode
* is on. This overrides WIFI_ON and BLUETOOTH_ON, if Wi-Fi and bluetooth are
* included in the comma separated list.
*/
public static final String AIRPLANE_MODE_RADIOS = "airplane_mode_radios";
/**
* A comma separated list of radios that should to be disabled when airplane mode
* is on, but can be manually reenabled by the user. For example, if RADIO_WIFI is
* added to both AIRPLANE_MODE_RADIOS and AIRPLANE_MODE_TOGGLEABLE_RADIOS, then Wifi
* will be turned off when entering airplane mode, but the user will be able to reenable
* Wifi in the Settings app.
*
* {@hide}
*/
public static final String AIRPLANE_MODE_TOGGLEABLE_RADIOS = "airplane_mode_toggleable_radios";
/**
* A semi-colon separated list of Bluetooth interoperability workarounds.
* Each entry is a partial Bluetooth device address string and an integer representing
* the feature to be disabled, separated by a comma. The integer must correspond
* to a interoperability feature as defined in "interop.h" in /system/bt.
*
* Example:
* Set to one of {@link #WIFI_SLEEP_POLICY_DEFAULT},
* {@link #WIFI_SLEEP_POLICY_NEVER_WHILE_PLUGGED}, or
* {@link #WIFI_SLEEP_POLICY_NEVER}.
*/
public static final String WIFI_SLEEP_POLICY = "wifi_sleep_policy";
/**
* Value for {@link #WIFI_SLEEP_POLICY} to use the default Wi-Fi sleep
* policy, which is to sleep shortly after the turning off
* according to the {@link #STAY_ON_WHILE_PLUGGED_IN} setting.
*/
public static final int WIFI_SLEEP_POLICY_DEFAULT = 0;
/**
* Value for {@link #WIFI_SLEEP_POLICY} to use the default policy when
* the device is on battery, and never go to sleep when the device is
* plugged in.
*/
public static final int WIFI_SLEEP_POLICY_NEVER_WHILE_PLUGGED = 1;
/**
* Value for {@link #WIFI_SLEEP_POLICY} to never go to sleep.
*/
public static final int WIFI_SLEEP_POLICY_NEVER = 2;
/**
* Value to specify if the user prefers the date, time and time zone
* to be automatically fetched from the network (NITZ). 1=yes, 0=no
*/
public static final String AUTO_TIME = "auto_time";
/**
* Value to specify if the user prefers the time zone
* to be automatically fetched from the network (NITZ). 1=yes, 0=no
*/
public static final String AUTO_TIME_ZONE = "auto_time_zone";
/**
* URI for the car dock "in" event sound.
* @hide
*/
public static final String CAR_DOCK_SOUND = "car_dock_sound";
/**
* URI for the car dock "out" event sound.
* @hide
*/
public static final String CAR_UNDOCK_SOUND = "car_undock_sound";
/**
* URI for the desk dock "in" event sound.
* @hide
*/
public static final String DESK_DOCK_SOUND = "desk_dock_sound";
/**
* URI for the desk dock "out" event sound.
* @hide
*/
public static final String DESK_UNDOCK_SOUND = "desk_undock_sound";
/**
* Whether to play a sound for dock events.
* @hide
*/
public static final String DOCK_SOUNDS_ENABLED = "dock_sounds_enabled";
/**
* URI for the "device locked" (keyguard shown) sound.
* @hide
*/
public static final String LOCK_SOUND = "lock_sound";
/**
* URI for the "device unlocked" sound.
* @hide
*/
public static final String UNLOCK_SOUND = "unlock_sound";
/**
* URI for the "device is trusted" sound, which is played when the device enters the trusted
* state without unlocking.
* @hide
*/
public static final String TRUSTED_SOUND = "trusted_sound";
/**
* URI for the low battery sound file.
* @hide
*/
public static final String LOW_BATTERY_SOUND = "low_battery_sound";
/**
* Whether to play a sound for low-battery alerts.
* @hide
*/
public static final String POWER_SOUNDS_ENABLED = "power_sounds_enabled";
/**
* URI for the "wireless charging started" sound.
* @hide
*/
public static final String WIRELESS_CHARGING_STARTED_SOUND =
"wireless_charging_started_sound";
/**
* Whether to play a sound for charging events.
* @hide
*/
public static final String CHARGING_SOUNDS_ENABLED = "charging_sounds_enabled";
/**
* Whether we keep the device on while the device is plugged in.
* Supported values are:
*
* If not connected and the scan results have an open network, we will
* put this notification up. If we attempt to connect to a network or
* the open network(s) disappear, we remove the notification. When we
* show the notification, we will not show it again for
* {@link android.provider.Settings.Secure#WIFI_NETWORKS_AVAILABLE_REPEAT_DELAY} time.
*/
public static final String WIFI_NETWORKS_AVAILABLE_NOTIFICATION_ON =
"wifi_networks_available_notification_on";
/**
* {@hide}
*/
public static final String WIMAX_NETWORKS_AVAILABLE_NOTIFICATION_ON =
"wimax_networks_available_notification_on";
/**
* Delay (in seconds) before repeating the Wi-Fi networks available notification.
* Connecting to a network will reset the timer.
*/
public static final String WIFI_NETWORKS_AVAILABLE_REPEAT_DELAY =
"wifi_networks_available_repeat_delay";
/**
* 802.11 country code in ISO 3166 format
* @hide
*/
public static final String WIFI_COUNTRY_CODE = "wifi_country_code";
/**
* The interval in milliseconds to issue wake up scans when wifi needs
* to connect. This is necessary to connect to an access point when
* device is on the move and the screen is off.
* @hide
*/
public static final String WIFI_FRAMEWORK_SCAN_INTERVAL_MS =
"wifi_framework_scan_interval_ms";
/**
* The interval in milliseconds after which Wi-Fi is considered idle.
* When idle, it is possible for the device to be switched from Wi-Fi to
* the mobile data network.
* @hide
*/
public static final String WIFI_IDLE_MS = "wifi_idle_ms";
/**
* When the number of open networks exceeds this number, the
* least-recently-used excess networks will be removed.
*/
public static final String WIFI_NUM_OPEN_NETWORKS_KEPT = "wifi_num_open_networks_kept";
/**
* Whether the Wi-Fi should be on. Only the Wi-Fi service should touch this.
*/
public static final String WIFI_ON = "wifi_on";
/**
* Setting to allow scans to be enabled even wifi is turned off for connectivity.
* @hide
*/
public static final String WIFI_SCAN_ALWAYS_AVAILABLE =
"wifi_scan_always_enabled";
/**
* Settings to allow BLE scans to be enabled even when Bluetooth is turned off for
* connectivity.
* @hide
*/
public static final String BLE_SCAN_ALWAYS_AVAILABLE =
"ble_scan_always_enabled";
/**
* Used to save the Wifi_ON state prior to tethering.
* This state will be checked to restore Wifi after
* the user turns off tethering.
*
* @hide
*/
public static final String WIFI_SAVED_STATE = "wifi_saved_state";
/**
* The interval in milliseconds to scan as used by the wifi supplicant
* @hide
*/
public static final String WIFI_SUPPLICANT_SCAN_INTERVAL_MS =
"wifi_supplicant_scan_interval_ms";
/**
* whether frameworks handles wifi auto-join
* @hide
*/
public static final String WIFI_ENHANCED_AUTO_JOIN =
"wifi_enhanced_auto_join";
/**
* whether settings show RSSI
* @hide
*/
public static final String WIFI_NETWORK_SHOW_RSSI =
"wifi_network_show_rssi";
/**
* The interval in milliseconds to scan at supplicant when p2p is connected
* @hide
*/
public static final String WIFI_SCAN_INTERVAL_WHEN_P2P_CONNECTED_MS =
"wifi_scan_interval_p2p_connected_ms";
/**
* Whether the Wi-Fi watchdog is enabled.
*/
public static final String WIFI_WATCHDOG_ON = "wifi_watchdog_on";
/**
* Setting to turn off poor network avoidance on Wi-Fi. Feature is enabled by default and
* the setting needs to be set to 0 to disable it.
* @hide
*/
public static final String WIFI_WATCHDOG_POOR_NETWORK_TEST_ENABLED =
"wifi_watchdog_poor_network_test_enabled";
/**
* Setting to turn on suspend optimizations at screen off on Wi-Fi. Enabled by default and
* needs to be set to 0 to disable it.
* @hide
*/
public static final String WIFI_SUSPEND_OPTIMIZATIONS_ENABLED =
"wifi_suspend_optimizations_enabled";
/**
* The maximum number of times we will retry a connection to an access
* point for which we have failed in acquiring an IP address from DHCP.
* A value of N means that we will make N+1 connection attempts in all.
*/
public static final String WIFI_MAX_DHCP_RETRY_COUNT = "wifi_max_dhcp_retry_count";
/**
* Maximum amount of time in milliseconds to hold a wakelock while waiting for mobile
* data connectivity to be established after a disconnect from Wi-Fi.
*/
public static final String WIFI_MOBILE_DATA_TRANSITION_WAKELOCK_TIMEOUT_MS =
"wifi_mobile_data_transition_wakelock_timeout_ms";
/**
* This setting controls whether WiFi configurations created by a Device Owner app
* should be locked down (that is, be editable or removable only by the Device Owner App,
* not even by Settings app).
* This setting takes integer values. Non-zero values mean DO created configurations
* are locked down. Value of zero means they are not. Default value in the absence of
* actual value to this setting is 0.
*/
public static final String WIFI_DEVICE_OWNER_CONFIGS_LOCKDOWN =
"wifi_device_owner_configs_lockdown";
/**
* The operational wifi frequency band
* Set to one of {@link WifiManager#WIFI_FREQUENCY_BAND_AUTO},
* {@link WifiManager#WIFI_FREQUENCY_BAND_5GHZ} or
* {@link WifiManager#WIFI_FREQUENCY_BAND_2GHZ}
*
* @hide
*/
public static final String WIFI_FREQUENCY_BAND = "wifi_frequency_band";
/**
* The Wi-Fi peer-to-peer device name
* @hide
*/
public static final String WIFI_P2P_DEVICE_NAME = "wifi_p2p_device_name";
/**
* The min time between wifi disable and wifi enable
* @hide
*/
public static final String WIFI_REENABLE_DELAY_MS = "wifi_reenable_delay";
/**
* Timeout for ephemeral networks when all known BSSIDs go out of range. We will disconnect
* from an ephemeral network if there is no BSSID for that network with a non-null score that
* has been seen in this time period.
*
* If this is less than or equal to zero, we use a more conservative behavior and only check
* for a non-null score from the currently connected or target BSSID.
* @hide
*/
public static final String WIFI_EPHEMERAL_OUT_OF_RANGE_TIMEOUT_MS =
"wifi_ephemeral_out_of_range_timeout_ms";
/**
* The number of milliseconds to delay when checking for data stalls during
* non-aggressive detection. (screen is turned off.)
* @hide
*/
public static final String DATA_STALL_ALARM_NON_AGGRESSIVE_DELAY_IN_MS =
"data_stall_alarm_non_aggressive_delay_in_ms";
/**
* The number of milliseconds to delay when checking for data stalls during
* aggressive detection. (screen on or suspected data stall)
* @hide
*/
public static final String DATA_STALL_ALARM_AGGRESSIVE_DELAY_IN_MS =
"data_stall_alarm_aggressive_delay_in_ms";
/**
* The number of milliseconds to allow the provisioning apn to remain active
* @hide
*/
public static final String PROVISIONING_APN_ALARM_DELAY_IN_MS =
"provisioning_apn_alarm_delay_in_ms";
/**
* The interval in milliseconds at which to check gprs registration
* after the first registration mismatch of gprs and voice service,
* to detect possible data network registration problems.
*
* @hide
*/
public static final String GPRS_REGISTER_CHECK_PERIOD_MS =
"gprs_register_check_period_ms";
/**
* Nonzero causes Log.wtf() to crash.
* @hide
*/
public static final String WTF_IS_FATAL = "wtf_is_fatal";
/**
* Ringer mode. This is used internally, changing this value will not
* change the ringer mode. See AudioManager.
*/
public static final String MODE_RINGER = "mode_ringer";
/**
* Overlay display devices setting.
* The associated value is a specially formatted string that describes the
* size and density of simulated secondary display devices.
*
* Format: {width}x{height}/{dpi};...
*
* Example:
*
* Type: int (0 = disallow, 1 = allow)
*
* @hide
*/
public static final String SEND_ACTION_APP_ERROR = "send_action_app_error";
/**
* Maximum age of entries kept by {@link DropBoxManager}.
*
* @hide
*/
public static final String DROPBOX_AGE_SECONDS = "dropbox_age_seconds";
/**
* Maximum number of entry files which {@link DropBoxManager} will keep
* around.
*
* @hide
*/
public static final String DROPBOX_MAX_FILES = "dropbox_max_files";
/**
* Maximum amount of disk space used by {@link DropBoxManager} no matter
* what.
*
* @hide
*/
public static final String DROPBOX_QUOTA_KB = "dropbox_quota_kb";
/**
* Percent of free disk (excluding reserve) which {@link DropBoxManager}
* will use.
*
* @hide
*/
public static final String DROPBOX_QUOTA_PERCENT = "dropbox_quota_percent";
/**
* Percent of total disk which {@link DropBoxManager} will never dip
* into.
*
* @hide
*/
public static final String DROPBOX_RESERVE_PERCENT = "dropbox_reserve_percent";
/**
* Prefix for per-tag dropbox disable/enable settings.
*
* @hide
*/
public static final String DROPBOX_TAG_PREFIX = "dropbox:";
/**
* Lines of logcat to include with system crash/ANR/etc. reports, as a
* prefix of the dropbox tag of the report type. For example,
* "logcat_for_system_server_anr" controls the lines of logcat captured
* with system server ANR reports. 0 to disable.
*
* @hide
*/
public static final String ERROR_LOGCAT_PREFIX = "logcat_for_";
/**
* The interval in minutes after which the amount of free storage left
* on the device is logged to the event log
*
* @hide
*/
public static final String SYS_FREE_STORAGE_LOG_INTERVAL = "sys_free_storage_log_interval";
/**
* Threshold for the amount of change in disk free space required to
* report the amount of free space. Used to prevent spamming the logs
* when the disk free space isn't changing frequently.
*
* @hide
*/
public static final String
DISK_FREE_CHANGE_REPORTING_THRESHOLD = "disk_free_change_reporting_threshold";
/**
* Minimum percentage of free storage on the device that is used to
* determine if the device is running low on storage. The default is 10.
*
* Say this value is set to 10, the device is considered running low on
* storage if 90% or more of the device storage is filled up.
*
* @hide
*/
public static final String
SYS_STORAGE_THRESHOLD_PERCENTAGE = "sys_storage_threshold_percentage";
/**
* Maximum byte size of the low storage threshold. This is to ensure
* that {@link #SYS_STORAGE_THRESHOLD_PERCENTAGE} does not result in an
* overly large threshold for large storage devices. Currently this must
* be less than 2GB. This default is 500MB.
*
* @hide
*/
public static final String
SYS_STORAGE_THRESHOLD_MAX_BYTES = "sys_storage_threshold_max_bytes";
/**
* Minimum bytes of free storage on the device before the data partition
* is considered full. By default, 1 MB is reserved to avoid system-wide
* SQLite disk full exceptions.
*
* @hide
*/
public static final String
SYS_STORAGE_FULL_THRESHOLD_BYTES = "sys_storage_full_threshold_bytes";
/**
* The maximum reconnect delay for short network outages or when the
* network is suspended due to phone use.
*
* @hide
*/
public static final String
SYNC_MAX_RETRY_DELAY_IN_SECONDS = "sync_max_retry_delay_in_seconds";
/**
* The number of milliseconds to delay before sending out
* {@link ConnectivityManager#CONNECTIVITY_ACTION} broadcasts. Ignored.
*
* @hide
*/
public static final String CONNECTIVITY_CHANGE_DELAY = "connectivity_change_delay";
/**
* Network sampling interval, in seconds. We'll generate link information
* about bytes/packets sent and error rates based on data sampled in this interval
*
* @hide
*/
public static final String CONNECTIVITY_SAMPLING_INTERVAL_IN_SECONDS =
"connectivity_sampling_interval_in_seconds";
/**
* The series of successively longer delays used in retrying to download PAC file.
* Last delay is used between successful PAC downloads.
*
* @hide
*/
public static final String PAC_CHANGE_DELAY = "pac_change_delay";
/**
* Setting to turn off captive portal detection. Feature is enabled by
* default and the setting needs to be set to 0 to disable it.
*
* @hide
*/
public static final String
CAPTIVE_PORTAL_DETECTION_ENABLED = "captive_portal_detection_enabled";
/**
* The server used for captive portal detection upon a new conection. A
* 204 response code from the server is used for validation.
*
* @hide
*/
public static final String CAPTIVE_PORTAL_SERVER = "captive_portal_server";
/**
* Whether network service discovery is enabled.
*
* @hide
*/
public static final String NSD_ON = "nsd_on";
/**
* Let user pick default install location.
*
* @hide
*/
public static final String SET_INSTALL_LOCATION = "set_install_location";
/**
* Default install location value.
* 0 = auto, let system decide
* 1 = internal
* 2 = sdcard
* @hide
*/
public static final String DEFAULT_INSTALL_LOCATION = "default_install_location";
/**
* ms during which to consume extra events related to Inet connection
* condition after a transtion to fully-connected
*
* @hide
*/
public static final String
INET_CONDITION_DEBOUNCE_UP_DELAY = "inet_condition_debounce_up_delay";
/**
* ms during which to consume extra events related to Inet connection
* condtion after a transtion to partly-connected
*
* @hide
*/
public static final String
INET_CONDITION_DEBOUNCE_DOWN_DELAY = "inet_condition_debounce_down_delay";
/** {@hide} */
public static final String
READ_EXTERNAL_STORAGE_ENFORCED_DEFAULT = "read_external_storage_enforced_default";
/**
* Host name and port for global http proxy. Uses ':' seperator for
* between host and port.
*/
public static final String HTTP_PROXY = "http_proxy";
/**
* Host name for global http proxy. Set via ConnectivityManager.
*
* @hide
*/
public static final String GLOBAL_HTTP_PROXY_HOST = "global_http_proxy_host";
/**
* Integer host port for global http proxy. Set via ConnectivityManager.
*
* @hide
*/
public static final String GLOBAL_HTTP_PROXY_PORT = "global_http_proxy_port";
/**
* Exclusion list for global proxy. This string contains a list of
* comma-separated domains where the global proxy does not apply.
* Domains should be listed in a comma- separated list. Example of
* acceptable formats: ".domain1.com,my.domain2.com" Use
* ConnectivityManager to set/get.
*
* @hide
*/
public static final String
GLOBAL_HTTP_PROXY_EXCLUSION_LIST = "global_http_proxy_exclusion_list";
/**
* The location PAC File for the proxy.
* @hide
*/
public static final String
GLOBAL_HTTP_PROXY_PAC = "global_proxy_pac_url";
/**
* Enables the UI setting to allow the user to specify the global HTTP
* proxy and associated exclusion list.
*
* @hide
*/
public static final String SET_GLOBAL_HTTP_PROXY = "set_global_http_proxy";
/**
* Setting for default DNS in case nobody suggests one
*
* @hide
*/
public static final String DEFAULT_DNS_SERVER = "default_dns_server";
/** {@hide} */
public static final String
BLUETOOTH_HEADSET_PRIORITY_PREFIX = "bluetooth_headset_priority_";
/** {@hide} */
public static final String
BLUETOOTH_A2DP_SINK_PRIORITY_PREFIX = "bluetooth_a2dp_sink_priority_";
/** {@hide} */
public static final String
BLUETOOTH_INPUT_DEVICE_PRIORITY_PREFIX = "bluetooth_input_device_priority_";
/** {@hide} */
public static final String
BLUETOOTH_MAP_PRIORITY_PREFIX = "bluetooth_map_priority_";
/** {@hide} */
public static final String
BLUETOOTH_SAP_PRIORITY_PREFIX = "bluetooth_sap_priority_";
/**
* Device Idle (Doze) specific settings.
* This is encoded as a key=value list, separated by commas. Ex:
*
* "inactive_timeout=60000,sensing_timeout=400000"
*
* The following keys are supported:
*
*
* Type: string
* @hide
* @see com.android.server.DeviceIdleController.Constants
*/
public static final String DEVICE_IDLE_CONSTANTS = "device_idle_constants";
/**
* App standby (app idle) specific settings.
* This is encoded as a key=value list, separated by commas. Ex:
*
* "idle_duration=5000,parole_interval=4500"
*
* The following keys are supported:
*
*
* Type: string
* @hide
* @see com.android.server.usage.UsageStatsService.SettingsObserver
*/
public static final String APP_IDLE_CONSTANTS = "app_idle_constants";
/**
* Alarm manager specific settings.
* This is encoded as a key=value list, separated by commas. Ex:
*
* "min_futurity=5000,allow_while_idle_short_time=4500"
*
* The following keys are supported:
*
*
* Type: string
* @hide
* @see com.android.server.AlarmManagerService.Constants
*/
public static final String ALARM_MANAGER_CONSTANTS = "alarm_manager_constants";
/**
* Get the key that retrieves a bluetooth headset's priority.
* @hide
*/
public static final String getBluetoothHeadsetPriorityKey(String address) {
return BLUETOOTH_HEADSET_PRIORITY_PREFIX + address.toUpperCase(Locale.ROOT);
}
/**
* Get the key that retrieves a bluetooth a2dp sink's priority.
* @hide
*/
public static final String getBluetoothA2dpSinkPriorityKey(String address) {
return BLUETOOTH_A2DP_SINK_PRIORITY_PREFIX + address.toUpperCase(Locale.ROOT);
}
/**
* Get the key that retrieves a bluetooth Input Device's priority.
* @hide
*/
public static final String getBluetoothInputDevicePriorityKey(String address) {
return BLUETOOTH_INPUT_DEVICE_PRIORITY_PREFIX + address.toUpperCase(Locale.ROOT);
}
/**
* Get the key that retrieves a bluetooth map priority.
* @hide
*/
public static final String getBluetoothMapPriorityKey(String address) {
return BLUETOOTH_MAP_PRIORITY_PREFIX + address.toUpperCase(Locale.ROOT);
}
/**
* Get the key that retrieves a bluetooth map priority.
* @hide
*/
public static final String getBluetoothSapPriorityKey(String address) {
return BLUETOOTH_SAP_PRIORITY_PREFIX + address.toUpperCase(Locale.ROOT);
}
/**
* Scaling factor for normal window animations. Setting to 0 will
* disable window animations.
*/
public static final String WINDOW_ANIMATION_SCALE = "window_animation_scale";
/**
* Scaling factor for activity transition animations. Setting to 0 will
* disable window animations.
*/
public static final String TRANSITION_ANIMATION_SCALE = "transition_animation_scale";
/**
* Scaling factor for Animator-based animations. This affects both the
* start delay and duration of all such animations. Setting to 0 will
* cause animations to end immediately. The default value is 1.
*/
public static final String ANIMATOR_DURATION_SCALE = "animator_duration_scale";
/**
* Scaling factor for normal window animations. Setting to 0 will
* disable window animations.
*
* @hide
*/
public static final String FANCY_IME_ANIMATIONS = "fancy_ime_animations";
/**
* If 0, the compatibility mode is off for all applications.
* If 1, older applications run under compatibility mode.
* TODO: remove this settings before code freeze (bug/1907571)
* @hide
*/
public static final String COMPATIBILITY_MODE = "compatibility_mode";
/**
* CDMA only settings
* Emergency Tone 0 = Off
* 1 = Alert
* 2 = Vibrate
* @hide
*/
public static final String EMERGENCY_TONE = "emergency_tone";
/**
* CDMA only settings
* Whether the auto retry is enabled. The value is
* boolean (1 or 0).
* @hide
*/
public static final String CALL_AUTO_RETRY = "call_auto_retry";
/**
* See RIL_PreferredNetworkType in ril.h
* @hide
*/
public static final String PREFERRED_NETWORK_MODE =
"preferred_network_mode";
/**
* Name of an application package to be debugged.
*/
public static final String DEBUG_APP = "debug_app";
/**
* If 1, when launching DEBUG_APP it will wait for the debugger before
* starting user code. If 0, it will run normally.
*/
public static final String WAIT_FOR_DEBUGGER = "wait_for_debugger";
/**
* Control whether the process CPU usage meter should be shown.
*/
public static final String SHOW_PROCESSES = "show_processes";
/**
* If 1 low power mode is enabled.
* @hide
*/
public static final String LOW_POWER_MODE = "low_power";
/**
* Battery level [1-99] at which low power mode automatically turns on.
* If 0, it will not automatically turn on.
* @hide
*/
public static final String LOW_POWER_MODE_TRIGGER_LEVEL = "low_power_trigger_level";
/**
* If 1, the activity manager will aggressively finish activities and
* processes as soon as they are no longer needed. If 0, the normal
* extended lifetime is used.
*/
public static final String ALWAYS_FINISH_ACTIVITIES = "always_finish_activities";
/**
* Use Dock audio output for media:
* 0 = disabled
* 1 = enabled
* @hide
*/
public static final String DOCK_AUDIO_MEDIA_ENABLED = "dock_audio_media_enabled";
/**
* Persisted safe headphone volume management state by AudioService
* @hide
*/
public static final String AUDIO_SAFE_VOLUME_STATE = "audio_safe_volume_state";
/**
* URL for tzinfo (time zone) updates
* @hide
*/
public static final String TZINFO_UPDATE_CONTENT_URL = "tzinfo_content_url";
/**
* URL for tzinfo (time zone) update metadata
* @hide
*/
public static final String TZINFO_UPDATE_METADATA_URL = "tzinfo_metadata_url";
/**
* URL for selinux (mandatory access control) updates
* @hide
*/
public static final String SELINUX_UPDATE_CONTENT_URL = "selinux_content_url";
/**
* URL for selinux (mandatory access control) update metadata
* @hide
*/
public static final String SELINUX_UPDATE_METADATA_URL = "selinux_metadata_url";
/**
* URL for sms short code updates
* @hide
*/
public static final String SMS_SHORT_CODES_UPDATE_CONTENT_URL =
"sms_short_codes_content_url";
/**
* URL for sms short code update metadata
* @hide
*/
public static final String SMS_SHORT_CODES_UPDATE_METADATA_URL =
"sms_short_codes_metadata_url";
/**
* URL for cert pinlist updates
* @hide
*/
public static final String CERT_PIN_UPDATE_CONTENT_URL = "cert_pin_content_url";
/**
* URL for cert pinlist updates
* @hide
*/
public static final String CERT_PIN_UPDATE_METADATA_URL = "cert_pin_metadata_url";
/**
* URL for intent firewall updates
* @hide
*/
public static final String INTENT_FIREWALL_UPDATE_CONTENT_URL =
"intent_firewall_content_url";
/**
* URL for intent firewall update metadata
* @hide
*/
public static final String INTENT_FIREWALL_UPDATE_METADATA_URL =
"intent_firewall_metadata_url";
/**
* SELinux enforcement status. If 0, permissive; if 1, enforcing.
* @hide
*/
public static final String SELINUX_STATUS = "selinux_status";
/**
* Developer setting to force RTL layout.
* @hide
*/
public static final String DEVELOPMENT_FORCE_RTL = "debug.force_rtl";
/**
* Milliseconds after screen-off after which low battery sounds will be silenced.
*
* If zero, battery sounds will always play.
* Defaults to @integer/def_low_battery_sound_timeout in SettingsProvider.
*
* @hide
*/
public static final String LOW_BATTERY_SOUND_TIMEOUT = "low_battery_sound_timeout";
/**
* Milliseconds to wait before bouncing Wi-Fi after settings is restored. Note that after
* the caller is done with this, they should call {@link ContentResolver#delete} to
* clean up any value that they may have written.
*
* @hide
*/
public static final String WIFI_BOUNCE_DELAY_OVERRIDE_MS = "wifi_bounce_delay_override_ms";
/**
* Defines global runtime overrides to window policy.
*
* See {@link com.android.server.policy.PolicyControl} for value format.
*
* @hide
*/
public static final String POLICY_CONTROL = "policy_control";
/**
* Defines global zen mode. ZEN_MODE_OFF, ZEN_MODE_IMPORTANT_INTERRUPTIONS,
* or ZEN_MODE_NO_INTERRUPTIONS.
*
* @hide
*/
public static final String ZEN_MODE = "zen_mode";
/** @hide */ public static final int ZEN_MODE_OFF = 0;
/** @hide */ public static final int ZEN_MODE_IMPORTANT_INTERRUPTIONS = 1;
/** @hide */ public static final int ZEN_MODE_NO_INTERRUPTIONS = 2;
/** @hide */ public static final int ZEN_MODE_ALARMS = 3;
/** @hide */ public static String zenModeToString(int mode) {
if (mode == ZEN_MODE_IMPORTANT_INTERRUPTIONS) return "ZEN_MODE_IMPORTANT_INTERRUPTIONS";
if (mode == ZEN_MODE_ALARMS) return "ZEN_MODE_ALARMS";
if (mode == ZEN_MODE_NO_INTERRUPTIONS) return "ZEN_MODE_NO_INTERRUPTIONS";
return "ZEN_MODE_OFF";
}
/** @hide */ public static boolean isValidZenMode(int value) {
switch (value) {
case Global.ZEN_MODE_OFF:
case Global.ZEN_MODE_IMPORTANT_INTERRUPTIONS:
case Global.ZEN_MODE_ALARMS:
case Global.ZEN_MODE_NO_INTERRUPTIONS:
return true;
default:
return false;
}
}
/**
* Value of the ringer before entering zen mode.
*
* @hide
*/
public static final String ZEN_MODE_RINGER_LEVEL = "zen_mode_ringer_level";
/**
* Opaque value, changes when persisted zen mode configuration changes.
*
* @hide
*/
public static final String ZEN_MODE_CONFIG_ETAG = "zen_mode_config_etag";
/**
* Defines global heads up toggle. One of HEADS_UP_OFF, HEADS_UP_ON.
*
* @hide
*/
public static final String HEADS_UP_NOTIFICATIONS_ENABLED =
"heads_up_notifications_enabled";
/** @hide */ public static final int HEADS_UP_OFF = 0;
/** @hide */ public static final int HEADS_UP_ON = 1;
/**
* The name of the device
*
* @hide
*/
public static final String DEVICE_NAME = "device_name";
/**
* Whether it should be possible to create a guest user on the device.
*
* Type: int (0 for disabled, 1 for enabled)
* @hide
*/
public static final String GUEST_USER_ENABLED = "guest_user_enabled";
/**
* Whether the NetworkScoringService has been first initialized.
*
* Type: int (0 for false, 1 for true)
* @hide
*/
public static final String NETWORK_SCORING_PROVISIONED = "network_scoring_provisioned";
/**
* Whether the user wants to be prompted for password to decrypt the device on boot.
* This only matters if the storage is encrypted.
*
* Type: int (0 for false, 1 for true)
* @hide
*/
public static final String REQUIRE_PASSWORD_TO_DECRYPT = "require_password_to_decrypt";
/**
* Whether the Volte/VT is enabled
*
* Type: int (0 for false, 1 for true)
* @hide
*/
public static final String ENHANCED_4G_MODE_ENABLED = "volte_vt_enabled";
/**
* Whether WFC is enabled
*
* Type: int (0 for false, 1 for true)
*
* @hide
*/
public static final String WFC_IMS_ENABLED = "wfc_ims_enabled";
/**
* WFC Mode.
*
* Type: int - 2=Wi-Fi preferred, 1=Cellular preferred, 0=Wi-Fi only
*
* @hide
*/
public static final String WFC_IMS_MODE = "wfc_ims_mode";
/**
* Whether WFC roaming is enabled
*
* Type: int (0 for false, 1 for true)
*
* @hide
*/
public static final String WFC_IMS_ROAMING_ENABLED = "wfc_ims_roaming_enabled";
/**
* Whether user can enable/disable LTE as a preferred network. A carrier might control
* this via gservices, OMA-DM, carrier app, etc.
*
* Type: int (0 for false, 1 for true)
* @hide
*/
public static final String LTE_SERVICE_FORCED = "lte_service_forced";
/**
* Settings to backup. This is here so that it's in the same place as the settings
* keys and easy to update.
*
* These keys may be mentioned in the SETTINGS_TO_BACKUP arrays in System
* and Secure as well. This is because those tables drive both backup and
* restore, and restore needs to properly whitelist keys that used to live
* in those namespaces. The keys will only actually be backed up / restored
* if they are also mentioned in this table (Global.SETTINGS_TO_BACKUP).
*
* NOTE: Settings are backed up and restored in the order they appear
* in this array. If you have one setting depending on another,
* make sure that they are ordered appropriately.
*
* @hide
*/
public static final String[] SETTINGS_TO_BACKUP = {
BUGREPORT_IN_POWER_MENU,
STAY_ON_WHILE_PLUGGED_IN,
AUTO_TIME,
AUTO_TIME_ZONE,
POWER_SOUNDS_ENABLED,
DOCK_SOUNDS_ENABLED,
USB_MASS_STORAGE_ENABLED,
ENABLE_ACCESSIBILITY_GLOBAL_GESTURE_ENABLED,
WIFI_NETWORKS_AVAILABLE_NOTIFICATION_ON,
WIFI_NETWORKS_AVAILABLE_REPEAT_DELAY,
WIFI_WATCHDOG_POOR_NETWORK_TEST_ENABLED,
WIFI_NUM_OPEN_NETWORKS_KEPT,
EMERGENCY_TONE,
CALL_AUTO_RETRY,
DOCK_AUDIO_MEDIA_ENABLED,
LOW_POWER_MODE_TRIGGER_LEVEL
};
// Populated lazily, guarded by class object:
private static NameValueCache sNameValueCache = new NameValueCache(
SYS_PROP_SETTING_VERSION,
CONTENT_URI,
CALL_METHOD_GET_GLOBAL,
CALL_METHOD_PUT_GLOBAL);
// Certain settings have been moved from global to the per-user secure namespace
private static final HashSet
* This version does not take a default value. If the setting has not
* been set, or the string value is not a number,
* it throws {@link SettingNotFoundException}.
*
* @param cr The ContentResolver to access.
* @param name The name of the setting to retrieve.
*
* @throws SettingNotFoundException Thrown if a setting by the given
* name can't be found or the setting value is not an integer.
*
* @return The setting's current value.
*/
public static int getInt(ContentResolver cr, String name)
throws SettingNotFoundException {
String v = getString(cr, name);
try {
return Integer.parseInt(v);
} catch (NumberFormatException e) {
throw new SettingNotFoundException(name);
}
}
/**
* Convenience function for updating a single settings value as an
* integer. This will either create a new entry in the table if the
* given name does not exist, or modify the value of the existing row
* with that name. Note that internally setting values are always
* stored as strings, so this function converts the given value to a
* string before storing it.
*
* @param cr The ContentResolver to access.
* @param name The name of the setting to modify.
* @param value The new value for the setting.
* @return true if the value was set, false on database errors
*/
public static boolean putInt(ContentResolver cr, String name, int value) {
return putString(cr, name, Integer.toString(value));
}
/**
* Convenience function for retrieving a single secure settings value
* as a {@code long}. Note that internally setting values are always
* stored as strings; this function converts the string to a {@code long}
* for you. The default value will be returned if the setting is
* not defined or not a {@code long}.
*
* @param cr The ContentResolver to access.
* @param name The name of the setting to retrieve.
* @param def Value to return if the setting is not defined.
*
* @return The setting's current value, or 'def' if it is not defined
* or not a valid {@code long}.
*/
public static long getLong(ContentResolver cr, String name, long def) {
String valString = getString(cr, name);
long value;
try {
value = valString != null ? Long.parseLong(valString) : def;
} catch (NumberFormatException e) {
value = def;
}
return value;
}
/**
* Convenience function for retrieving a single secure settings value
* as a {@code long}. Note that internally setting values are always
* stored as strings; this function converts the string to a {@code long}
* for you.
*
* This version does not take a default value. If the setting has not
* been set, or the string value is not a number,
* it throws {@link SettingNotFoundException}.
*
* @param cr The ContentResolver to access.
* @param name The name of the setting to retrieve.
*
* @return The setting's current value.
* @throws SettingNotFoundException Thrown if a setting by the given
* name can't be found or the setting value is not an integer.
*/
public static long getLong(ContentResolver cr, String name)
throws SettingNotFoundException {
String valString = getString(cr, name);
try {
return Long.parseLong(valString);
} catch (NumberFormatException e) {
throw new SettingNotFoundException(name);
}
}
/**
* Convenience function for updating a secure settings value as a long
* integer. This will either create a new entry in the table if the
* given name does not exist, or modify the value of the existing row
* with that name. Note that internally setting values are always
* stored as strings, so this function converts the given value to a
* string before storing it.
*
* @param cr The ContentResolver to access.
* @param name The name of the setting to modify.
* @param value The new value for the setting.
* @return true if the value was set, false on database errors
*/
public static boolean putLong(ContentResolver cr, String name, long value) {
return putString(cr, name, Long.toString(value));
}
/**
* Convenience function for retrieving a single secure settings value
* as a floating point number. Note that internally setting values are
* always stored as strings; this function converts the string to an
* float for you. The default value will be returned if the setting
* is not defined or not a valid float.
*
* @param cr The ContentResolver to access.
* @param name The name of the setting to retrieve.
* @param def Value to return if the setting is not defined.
*
* @return The setting's current value, or 'def' if it is not defined
* or not a valid float.
*/
public static float getFloat(ContentResolver cr, String name, float def) {
String v = getString(cr, name);
try {
return v != null ? Float.parseFloat(v) : def;
} catch (NumberFormatException e) {
return def;
}
}
/**
* Convenience function for retrieving a single secure settings value
* as a float. Note that internally setting values are always
* stored as strings; this function converts the string to a float
* for you.
*
* This version does not take a default value. If the setting has not
* been set, or the string value is not a number,
* it throws {@link SettingNotFoundException}.
*
* @param cr The ContentResolver to access.
* @param name The name of the setting to retrieve.
*
* @throws SettingNotFoundException Thrown if a setting by the given
* name can't be found or the setting value is not a float.
*
* @return The setting's current value.
*/
public static float getFloat(ContentResolver cr, String name)
throws SettingNotFoundException {
String v = getString(cr, name);
if (v == null) {
throw new SettingNotFoundException(name);
}
try {
return Float.parseFloat(v);
} catch (NumberFormatException e) {
throw new SettingNotFoundException(name);
}
}
/**
* Convenience function for updating a single settings value as a
* floating point number. This will either create a new entry in the
* table if the given name does not exist, or modify the value of the
* existing row with that name. Note that internally setting values
* are always stored as strings, so this function converts the given
* value to a string before storing it.
*
* @param cr The ContentResolver to access.
* @param name The name of the setting to modify.
* @param value The new value for the setting.
* @return true if the value was set, false on database errors
*/
public static boolean putFloat(ContentResolver cr, String name, float value) {
return putString(cr, name, Float.toString(value));
}
/**
* Subscription to be used for voice call on a multi sim device. The supported values
* are 0 = SUB1, 1 = SUB2 and etc.
* @hide
*/
public static final String MULTI_SIM_VOICE_CALL_SUBSCRIPTION = "multi_sim_voice_call";
/**
* Used to provide option to user to select subscription during dial.
* The supported values are 0 = disable or 1 = enable prompt.
* @hide
*/
public static final String MULTI_SIM_VOICE_PROMPT = "multi_sim_voice_prompt";
/**
* Subscription to be used for data call on a multi sim device. The supported values
* are 0 = SUB1, 1 = SUB2 and etc.
* @hide
*/
public static final String MULTI_SIM_DATA_CALL_SUBSCRIPTION = "multi_sim_data_call";
/**
* Subscription to be used for SMS on a multi sim device. The supported values
* are 0 = SUB1, 1 = SUB2 and etc.
* @hide
*/
public static final String MULTI_SIM_SMS_SUBSCRIPTION = "multi_sim_sms";
/**
* Used to provide option to user to select subscription during send SMS.
* The value 1 - enable, 0 - disable
* @hide
*/
public static final String MULTI_SIM_SMS_PROMPT = "multi_sim_sms_prompt";
/** User preferred subscriptions setting.
* This holds the details of the user selected subscription from the card and
* the activation status. Each settings string have the coma separated values
* iccId,appType,appId,activationStatus,3gppIndex,3gpp2Index
* @hide
*/
public static final String[] MULTI_SIM_USER_PREFERRED_SUBS = {"user_preferred_sub1",
"user_preferred_sub2","user_preferred_sub3"};
/**
* Whether to enable new contacts aggregator or not.
* The value 1 - enable, 0 - disable
* @hide
*/
public static final String NEW_CONTACT_AGGREGATOR = "new_contact_aggregator";
/**
* Whether to enable contacts metadata syncing or not
* The value 1 - enable, 0 - disable
* @hide
*/
public static final String CONTACT_METADATA_SYNC = "contact_metadata_sync";
}
/**
* User-defined bookmarks and shortcuts. The target of each bookmark is an
* Intent URL, allowing it to be either a web page or a particular
* application activity.
*
* @hide
*/
public static final class Bookmarks implements BaseColumns
{
private static final String TAG = "Bookmarks";
/**
* The content:// style URL for this table
*/
public static final Uri CONTENT_URI =
Uri.parse("content://" + AUTHORITY + "/bookmarks");
/**
* The row ID.
* Type: INTEGER
* Type: TEXT
* Type: TEXT Type: TEXT Type: INTEGER Type: INTEGER
* Values:
* 0 - The end button does nothing.
* 1 - The end button goes to the home screen.
* 2 - The end button puts the device to sleep and locks the keyguard.
* 3 - The end button goes to the home screen. If the user is already on the
* home screen, it puts the device to sleep.
*/
public static final String END_BUTTON_BEHAVIOR = "end_button_behavior";
private static final Validator END_BUTTON_BEHAVIOR_VALIDATOR =
new InclusiveIntegerRangeValidator(0, 3);
/**
* END_BUTTON_BEHAVIOR value for "go home".
* @hide
*/
public static final int END_BUTTON_BEHAVIOR_HOME = 0x1;
/**
* END_BUTTON_BEHAVIOR value for "go to sleep".
* @hide
*/
public static final int END_BUTTON_BEHAVIOR_SLEEP = 0x2;
/**
* END_BUTTON_BEHAVIOR default value.
* @hide
*/
public static final int END_BUTTON_BEHAVIOR_DEFAULT = END_BUTTON_BEHAVIOR_SLEEP;
/**
* Is advanced settings mode turned on. 0 == no, 1 == yes
* @hide
*/
public static final String ADVANCED_SETTINGS = "advanced_settings";
private static final Validator ADVANCED_SETTINGS_VALIDATOR = sBooleanValidator;
/**
* ADVANCED_SETTINGS default value.
* @hide
*/
public static final int ADVANCED_SETTINGS_DEFAULT = 0;
/**
* @deprecated Use {@link android.provider.Settings.Global#AIRPLANE_MODE_ON} instead
*/
@Deprecated
public static final String AIRPLANE_MODE_ON = Global.AIRPLANE_MODE_ON;
/**
* @deprecated Use {@link android.provider.Settings.Global#RADIO_BLUETOOTH} instead
*/
@Deprecated
public static final String RADIO_BLUETOOTH = Global.RADIO_BLUETOOTH;
/**
* @deprecated Use {@link android.provider.Settings.Global#RADIO_WIFI} instead
*/
@Deprecated
public static final String RADIO_WIFI = Global.RADIO_WIFI;
/**
* @deprecated Use {@link android.provider.Settings.Global#RADIO_WIMAX} instead
* {@hide}
*/
@Deprecated
public static final String RADIO_WIMAX = Global.RADIO_WIMAX;
/**
* @deprecated Use {@link android.provider.Settings.Global#RADIO_CELL} instead
*/
@Deprecated
public static final String RADIO_CELL = Global.RADIO_CELL;
/**
* @deprecated Use {@link android.provider.Settings.Global#RADIO_NFC} instead
*/
@Deprecated
public static final String RADIO_NFC = Global.RADIO_NFC;
/**
* @deprecated Use {@link android.provider.Settings.Global#AIRPLANE_MODE_RADIOS} instead
*/
@Deprecated
public static final String AIRPLANE_MODE_RADIOS = Global.AIRPLANE_MODE_RADIOS;
/**
* @deprecated Use {@link android.provider.Settings.Global#AIRPLANE_MODE_TOGGLEABLE_RADIOS} instead
*
* {@hide}
*/
@Deprecated
public static final String AIRPLANE_MODE_TOGGLEABLE_RADIOS =
Global.AIRPLANE_MODE_TOGGLEABLE_RADIOS;
/**
* @deprecated Use {@link android.provider.Settings.Global#WIFI_SLEEP_POLICY} instead
*/
@Deprecated
public static final String WIFI_SLEEP_POLICY = Global.WIFI_SLEEP_POLICY;
/**
* @deprecated Use {@link android.provider.Settings.Global#WIFI_SLEEP_POLICY_DEFAULT} instead
*/
@Deprecated
public static final int WIFI_SLEEP_POLICY_DEFAULT = Global.WIFI_SLEEP_POLICY_DEFAULT;
/**
* @deprecated Use {@link android.provider.Settings.Global#WIFI_SLEEP_POLICY_NEVER_WHILE_PLUGGED} instead
*/
@Deprecated
public static final int WIFI_SLEEP_POLICY_NEVER_WHILE_PLUGGED =
Global.WIFI_SLEEP_POLICY_NEVER_WHILE_PLUGGED;
/**
* @deprecated Use {@link android.provider.Settings.Global#WIFI_SLEEP_POLICY_NEVER} instead
*/
@Deprecated
public static final int WIFI_SLEEP_POLICY_NEVER = Global.WIFI_SLEEP_POLICY_NEVER;
/**
* @deprecated Use {@link android.provider.Settings.Global#MODE_RINGER} instead
*/
@Deprecated
public static final String MODE_RINGER = Global.MODE_RINGER;
/**
* Whether to use static IP and other static network attributes.
* PrefGetPreference(prefAllowEasterEggs).
* @hide
*/
public static final String EGG_MODE = "egg_mode";
/** @hide */
public static final Validator EGG_MODE_VALIDATOR = new Validator() {
@Override
public boolean validate(String value) {
try {
return Long.parseLong(value) >= 0;
} catch (NumberFormatException e) {
return false;
}
}
};
/**
* IMPORTANT: If you add a new public settings you also have to add it to
* PUBLIC_SETTINGS below. If the new setting is hidden you have to add
* it to PRIVATE_SETTINGS below. Also add a validator that can validate
* the setting value. See an example above.
*/
/**
* Settings to backup. This is here so that it's in the same place as the settings
* keys and easy to update.
*
* NOTE: Settings are backed up and restored in the order they appear
* in this array. If you have one setting depending on another,
* make sure that they are ordered appropriately.
*
* @hide
*/
public static final String[] SETTINGS_TO_BACKUP = {
STAY_ON_WHILE_PLUGGED_IN, // moved to global
WIFI_USE_STATIC_IP,
WIFI_STATIC_IP,
WIFI_STATIC_GATEWAY,
WIFI_STATIC_NETMASK,
WIFI_STATIC_DNS1,
WIFI_STATIC_DNS2,
BLUETOOTH_DISCOVERABILITY,
BLUETOOTH_DISCOVERABILITY_TIMEOUT,
DIM_SCREEN,
SCREEN_OFF_TIMEOUT,
SCREEN_BRIGHTNESS,
SCREEN_BRIGHTNESS_MODE,
SCREEN_AUTO_BRIGHTNESS_ADJ,
VIBRATE_INPUT_DEVICES,
MODE_RINGER_STREAMS_AFFECTED,
TEXT_AUTO_REPLACE,
TEXT_AUTO_CAPS,
TEXT_AUTO_PUNCTUATE,
TEXT_SHOW_PASSWORD,
AUTO_TIME, // moved to global
AUTO_TIME_ZONE, // moved to global
TIME_12_24,
DATE_FORMAT,
DTMF_TONE_WHEN_DIALING,
DTMF_TONE_TYPE_WHEN_DIALING,
HEARING_AID,
TTY_MODE,
SOUND_EFFECTS_ENABLED,
HAPTIC_FEEDBACK_ENABLED,
POWER_SOUNDS_ENABLED, // moved to global
DOCK_SOUNDS_ENABLED, // moved to global
LOCKSCREEN_SOUNDS_ENABLED,
SHOW_WEB_SUGGESTIONS,
SIP_CALL_OPTIONS,
SIP_RECEIVE_CALLS,
POINTER_SPEED,
VIBRATE_WHEN_RINGING,
RINGTONE,
LOCK_TO_APP_ENABLED,
NOTIFICATION_SOUND
};
/**
* These are all public system settings
*
* @hide
*/
public static final Set
* 0x16=0x01000100:0x01000101;
*
*
*
*
* @hide
*/
public static final String ACCESSIBILITY_CAPTIONING_ENABLED =
"accessibility_captioning_enabled";
/**
* Setting that specifies the language for captions as a locale string,
* e.g. en_US.
*
* @see java.util.Locale#toString
* @hide
*/
public static final String ACCESSIBILITY_CAPTIONING_LOCALE =
"accessibility_captioning_locale";
/**
* Integer property that specifies the preset style for captions, one
* of:
*
*
*
* @see java.util.Locale#toString
* @hide
*/
public static final String ACCESSIBILITY_CAPTIONING_PRESET =
"accessibility_captioning_preset";
/**
* Integer property that specifes the background color for captions as a
* packed 32-bit color.
*
* @see android.graphics.Color#argb
* @hide
*/
public static final String ACCESSIBILITY_CAPTIONING_BACKGROUND_COLOR =
"accessibility_captioning_background_color";
/**
* Integer property that specifes the foreground color for captions as a
* packed 32-bit color.
*
* @see android.graphics.Color#argb
* @hide
*/
public static final String ACCESSIBILITY_CAPTIONING_FOREGROUND_COLOR =
"accessibility_captioning_foreground_color";
/**
* Integer property that specifes the edge type for captions, one of:
*
*
*
* @see #ACCESSIBILITY_CAPTIONING_EDGE_COLOR
* @hide
*/
public static final String ACCESSIBILITY_CAPTIONING_EDGE_TYPE =
"accessibility_captioning_edge_type";
/**
* Integer property that specifes the edge color for captions as a
* packed 32-bit color.
*
* @see #ACCESSIBILITY_CAPTIONING_EDGE_TYPE
* @see android.graphics.Color#argb
* @hide
*/
public static final String ACCESSIBILITY_CAPTIONING_EDGE_COLOR =
"accessibility_captioning_edge_color";
/**
* Integer property that specifes the window color for captions as a
* packed 32-bit color.
*
* @see android.graphics.Color#argb
* @hide
*/
public static final String ACCESSIBILITY_CAPTIONING_WINDOW_COLOR =
"accessibility_captioning_window_color";
/**
* String property that specifies the typeface for captions, one of:
*
*
*
* @see android.graphics.Typeface
* @hide
*/
public static final String ACCESSIBILITY_CAPTIONING_TYPEFACE =
"accessibility_captioning_typeface";
/**
* Floating point property that specifies font scaling for captions.
*
* @hide
*/
public static final String ACCESSIBILITY_CAPTIONING_FONT_SCALE =
"accessibility_captioning_font_scale";
/**
* Setting that specifies whether display color inversion is enabled.
*/
public static final String ACCESSIBILITY_DISPLAY_INVERSION_ENABLED =
"accessibility_display_inversion_enabled";
/**
* Setting that specifies whether display color space adjustment is
* enabled.
*
* @hide
*/
public static final String ACCESSIBILITY_DISPLAY_DALTONIZER_ENABLED =
"accessibility_display_daltonizer_enabled";
/**
* Integer property that specifies the type of color space adjustment to
* perform. Valid values are defined in AccessibilityManager.
*
* @hide
*/
public static final String ACCESSIBILITY_DISPLAY_DALTONIZER =
"accessibility_display_daltonizer";
/**
* The timout for considering a press to be a long press in milliseconds.
* @hide
*/
public static final String LONG_PRESS_TIMEOUT = "long_press_timeout";
/**
* List of the enabled print services.
* @hide
*/
public static final String ENABLED_PRINT_SERVICES =
"enabled_print_services";
/**
* List of the system print services we enabled on first boot. On
* first boot we enable all system, i.e. bundled print services,
* once, so they work out-of-the-box.
* @hide
*/
public static final String ENABLED_ON_FIRST_BOOT_SYSTEM_PRINT_SERVICES =
"enabled_on_first_boot_system_print_services";
/**
* Setting to always use the default text-to-speech settings regardless
* of the application settings.
* 1 = override application settings,
* 0 = use application settings (if specified).
*
* @deprecated The value of this setting is no longer respected by
* the framework text to speech APIs as of the Ice Cream Sandwich release.
*/
@Deprecated
public static final String TTS_USE_DEFAULTS = "tts_use_defaults";
/**
* Default text-to-speech engine speech rate. 100 = 1x
*/
public static final String TTS_DEFAULT_RATE = "tts_default_rate";
/**
* Default text-to-speech engine pitch. 100 = 1x
*/
public static final String TTS_DEFAULT_PITCH = "tts_default_pitch";
/**
* Default text-to-speech engine.
*/
public static final String TTS_DEFAULT_SYNTH = "tts_default_synth";
/**
* Default text-to-speech language.
*
* @deprecated this setting is no longer in use, as of the Ice Cream
* Sandwich release. Apps should never need to read this setting directly,
* instead can query the TextToSpeech framework classes for the default
* locale. {@link TextToSpeech#getLanguage()}.
*/
@Deprecated
public static final String TTS_DEFAULT_LANG = "tts_default_lang";
/**
* Default text-to-speech country.
*
* @deprecated this setting is no longer in use, as of the Ice Cream
* Sandwich release. Apps should never need to read this setting directly,
* instead can query the TextToSpeech framework classes for the default
* locale. {@link TextToSpeech#getLanguage()}.
*/
@Deprecated
public static final String TTS_DEFAULT_COUNTRY = "tts_default_country";
/**
* Default text-to-speech locale variant.
*
* @deprecated this setting is no longer in use, as of the Ice Cream
* Sandwich release. Apps should never need to read this setting directly,
* instead can query the TextToSpeech framework classes for the
* locale that is in use {@link TextToSpeech#getLanguage()}.
*/
@Deprecated
public static final String TTS_DEFAULT_VARIANT = "tts_default_variant";
/**
* Stores the default tts locales on a per engine basis. Stored as
* a comma seperated list of values, each value being of the form
* {@code engine_name:locale} for example,
* {@code com.foo.ttsengine:eng-USA,com.bar.ttsengine:esp-ESP}. This
* supersedes {@link #TTS_DEFAULT_LANG}, {@link #TTS_DEFAULT_COUNTRY} and
* {@link #TTS_DEFAULT_VARIANT}. Apps should never need to read this
* setting directly, and can query the TextToSpeech framework classes
* for the locale that is in use.
*
* @hide
*/
public static final String TTS_DEFAULT_LOCALE = "tts_default_locale";
/**
* Space delimited list of plugin packages that are enabled.
*/
public static final String TTS_ENABLED_PLUGINS = "tts_enabled_plugins";
/**
* @deprecated Use {@link android.provider.Settings.Global#WIFI_NETWORKS_AVAILABLE_NOTIFICATION_ON}
* instead.
*/
@Deprecated
public static final String WIFI_NETWORKS_AVAILABLE_NOTIFICATION_ON =
Global.WIFI_NETWORKS_AVAILABLE_NOTIFICATION_ON;
/**
* @deprecated Use {@link android.provider.Settings.Global#WIFI_NETWORKS_AVAILABLE_REPEAT_DELAY}
* instead.
*/
@Deprecated
public static final String WIFI_NETWORKS_AVAILABLE_REPEAT_DELAY =
Global.WIFI_NETWORKS_AVAILABLE_REPEAT_DELAY;
/**
* @deprecated Use {@link android.provider.Settings.Global#WIFI_NUM_OPEN_NETWORKS_KEPT}
* instead.
*/
@Deprecated
public static final String WIFI_NUM_OPEN_NETWORKS_KEPT =
Global.WIFI_NUM_OPEN_NETWORKS_KEPT;
/**
* @deprecated Use {@link android.provider.Settings.Global#WIFI_ON}
* instead.
*/
@Deprecated
public static final String WIFI_ON = Global.WIFI_ON;
/**
* The acceptable packet loss percentage (range 0 - 100) before trying
* another AP on the same network.
* @deprecated This setting is not used.
*/
@Deprecated
public static final String WIFI_WATCHDOG_ACCEPTABLE_PACKET_LOSS_PERCENTAGE =
"wifi_watchdog_acceptable_packet_loss_percentage";
/**
* The number of access points required for a network in order for the
* watchdog to monitor it.
* @deprecated This setting is not used.
*/
@Deprecated
public static final String WIFI_WATCHDOG_AP_COUNT = "wifi_watchdog_ap_count";
/**
* The delay between background checks.
* @deprecated This setting is not used.
*/
@Deprecated
public static final String WIFI_WATCHDOG_BACKGROUND_CHECK_DELAY_MS =
"wifi_watchdog_background_check_delay_ms";
/**
* Whether the Wi-Fi watchdog is enabled for background checking even
* after it thinks the user has connected to a good access point.
* @deprecated This setting is not used.
*/
@Deprecated
public static final String WIFI_WATCHDOG_BACKGROUND_CHECK_ENABLED =
"wifi_watchdog_background_check_enabled";
/**
* The timeout for a background ping
* @deprecated This setting is not used.
*/
@Deprecated
public static final String WIFI_WATCHDOG_BACKGROUND_CHECK_TIMEOUT_MS =
"wifi_watchdog_background_check_timeout_ms";
/**
* The number of initial pings to perform that *may* be ignored if they
* fail. Again, if these fail, they will *not* be used in packet loss
* calculation. For example, one network always seemed to time out for
* the first couple pings, so this is set to 3 by default.
* @deprecated This setting is not used.
*/
@Deprecated
public static final String WIFI_WATCHDOG_INITIAL_IGNORED_PING_COUNT =
"wifi_watchdog_initial_ignored_ping_count";
/**
* The maximum number of access points (per network) to attempt to test.
* If this number is reached, the watchdog will no longer monitor the
* initial connection state for the network. This is a safeguard for
* networks containing multiple APs whose DNS does not respond to pings.
* @deprecated This setting is not used.
*/
@Deprecated
public static final String WIFI_WATCHDOG_MAX_AP_CHECKS = "wifi_watchdog_max_ap_checks";
/**
* @deprecated Use {@link android.provider.Settings.Global#WIFI_WATCHDOG_ON} instead
*/
@Deprecated
public static final String WIFI_WATCHDOG_ON = "wifi_watchdog_on";
/**
* A comma-separated list of SSIDs for which the Wi-Fi watchdog should be enabled.
* @deprecated This setting is not used.
*/
@Deprecated
public static final String WIFI_WATCHDOG_WATCH_LIST = "wifi_watchdog_watch_list";
/**
* The number of pings to test if an access point is a good connection.
* @deprecated This setting is not used.
*/
@Deprecated
public static final String WIFI_WATCHDOG_PING_COUNT = "wifi_watchdog_ping_count";
/**
* The delay between pings.
* @deprecated This setting is not used.
*/
@Deprecated
public static final String WIFI_WATCHDOG_PING_DELAY_MS = "wifi_watchdog_ping_delay_ms";
/**
* The timeout per ping.
* @deprecated This setting is not used.
*/
@Deprecated
public static final String WIFI_WATCHDOG_PING_TIMEOUT_MS = "wifi_watchdog_ping_timeout_ms";
/**
* @deprecated Use
* {@link android.provider.Settings.Global#WIFI_MAX_DHCP_RETRY_COUNT} instead
*/
@Deprecated
public static final String WIFI_MAX_DHCP_RETRY_COUNT = Global.WIFI_MAX_DHCP_RETRY_COUNT;
/**
* @deprecated Use
* {@link android.provider.Settings.Global#WIFI_MOBILE_DATA_TRANSITION_WAKELOCK_TIMEOUT_MS} instead
*/
@Deprecated
public static final String WIFI_MOBILE_DATA_TRANSITION_WAKELOCK_TIMEOUT_MS =
Global.WIFI_MOBILE_DATA_TRANSITION_WAKELOCK_TIMEOUT_MS;
/**
* The number of milliseconds to hold on to a PendingIntent based request. This delay gives
* the receivers of the PendingIntent an opportunity to make a new network request before
* the Network satisfying the request is potentially removed.
*
* @hide
*/
public static final String CONNECTIVITY_RELEASE_PENDING_INTENT_DELAY_MS =
"connectivity_release_pending_intent_delay_ms";
/**
* Whether background data usage is allowed.
*
* @deprecated As of {@link VERSION_CODES#ICE_CREAM_SANDWICH},
* availability of background data depends on several
* combined factors. When background data is unavailable,
* {@link ConnectivityManager#getActiveNetworkInfo()} will
* now appear disconnected.
*/
@Deprecated
public static final String BACKGROUND_DATA = "background_data";
/**
* Origins for which browsers should allow geolocation by default.
* The value is a space-separated list of origins.
*/
public static final String ALLOWED_GEOLOCATION_ORIGINS
= "allowed_geolocation_origins";
/**
* The preferred TTY mode 0 = TTy Off, CDMA default
* 1 = TTY Full
* 2 = TTY HCO
* 3 = TTY VCO
* @hide
*/
public static final String PREFERRED_TTY_MODE =
"preferred_tty_mode";
/**
* Whether the enhanced voice privacy mode is enabled.
* 0 = normal voice privacy
* 1 = enhanced voice privacy
* @hide
*/
public static final String ENHANCED_VOICE_PRIVACY_ENABLED = "enhanced_voice_privacy_enabled";
/**
* Whether the TTY mode mode is enabled.
* 0 = disabled
* 1 = enabled
* @hide
*/
public static final String TTY_MODE_ENABLED = "tty_mode_enabled";
/**
* Controls whether settings backup is enabled.
* Type: int ( 0 = disabled, 1 = enabled )
* @hide
*/
public static final String BACKUP_ENABLED = "backup_enabled";
/**
* Controls whether application data is automatically restored from backup
* at install time.
* Type: int ( 0 = disabled, 1 = enabled )
* @hide
*/
public static final String BACKUP_AUTO_RESTORE = "backup_auto_restore";
/**
* Indicates whether settings backup has been fully provisioned.
* Type: int ( 0 = unprovisioned, 1 = fully provisioned )
* @hide
*/
public static final String BACKUP_PROVISIONED = "backup_provisioned";
/**
* Component of the transport to use for backup/restore.
* @hide
*/
public static final String BACKUP_TRANSPORT = "backup_transport";
/**
* Version for which the setup wizard was last shown. Bumped for
* each release when there is new setup information to show.
* @hide
*/
public static final String LAST_SETUP_SHOWN = "last_setup_shown";
/**
* The interval in milliseconds after which Wi-Fi is considered idle.
* When idle, it is possible for the device to be switched from Wi-Fi to
* the mobile data network.
* @hide
* @deprecated Use {@link android.provider.Settings.Global#WIFI_IDLE_MS}
* instead.
*/
@Deprecated
public static final String WIFI_IDLE_MS = Global.WIFI_IDLE_MS;
/**
* The global search provider chosen by the user (if multiple global
* search providers are installed). This will be the provider returned
* by {@link SearchManager#getGlobalSearchActivity()} if it's still
* installed. This setting is stored as a flattened component name as
* per {@link ComponentName#flattenToString()}.
*
* @hide
*/
public static final String SEARCH_GLOBAL_SEARCH_ACTIVITY =
"search_global_search_activity";
/**
* The number of promoted sources in GlobalSearch.
* @hide
*/
public static final String SEARCH_NUM_PROMOTED_SOURCES = "search_num_promoted_sources";
/**
* The maximum number of suggestions returned by GlobalSearch.
* @hide
*/
public static final String SEARCH_MAX_RESULTS_TO_DISPLAY = "search_max_results_to_display";
/**
* The number of suggestions GlobalSearch will ask each non-web search source for.
* @hide
*/
public static final String SEARCH_MAX_RESULTS_PER_SOURCE = "search_max_results_per_source";
/**
* The number of suggestions the GlobalSearch will ask the web search source for.
* @hide
*/
public static final String SEARCH_WEB_RESULTS_OVERRIDE_LIMIT =
"search_web_results_override_limit";
/**
* The number of milliseconds that GlobalSearch will wait for suggestions from
* promoted sources before continuing with all other sources.
* @hide
*/
public static final String SEARCH_PROMOTED_SOURCE_DEADLINE_MILLIS =
"search_promoted_source_deadline_millis";
/**
* The number of milliseconds before GlobalSearch aborts search suggesiton queries.
* @hide
*/
public static final String SEARCH_SOURCE_TIMEOUT_MILLIS = "search_source_timeout_millis";
/**
* The maximum number of milliseconds that GlobalSearch shows the previous results
* after receiving a new query.
* @hide
*/
public static final String SEARCH_PREFILL_MILLIS = "search_prefill_millis";
/**
* The maximum age of log data used for shortcuts in GlobalSearch.
* @hide
*/
public static final String SEARCH_MAX_STAT_AGE_MILLIS = "search_max_stat_age_millis";
/**
* The maximum age of log data used for source ranking in GlobalSearch.
* @hide
*/
public static final String SEARCH_MAX_SOURCE_EVENT_AGE_MILLIS =
"search_max_source_event_age_millis";
/**
* The minimum number of impressions needed to rank a source in GlobalSearch.
* @hide
*/
public static final String SEARCH_MIN_IMPRESSIONS_FOR_SOURCE_RANKING =
"search_min_impressions_for_source_ranking";
/**
* The minimum number of clicks needed to rank a source in GlobalSearch.
* @hide
*/
public static final String SEARCH_MIN_CLICKS_FOR_SOURCE_RANKING =
"search_min_clicks_for_source_ranking";
/**
* The maximum number of shortcuts shown by GlobalSearch.
* @hide
*/
public static final String SEARCH_MAX_SHORTCUTS_RETURNED = "search_max_shortcuts_returned";
/**
* The size of the core thread pool for suggestion queries in GlobalSearch.
* @hide
*/
public static final String SEARCH_QUERY_THREAD_CORE_POOL_SIZE =
"search_query_thread_core_pool_size";
/**
* The maximum size of the thread pool for suggestion queries in GlobalSearch.
* @hide
*/
public static final String SEARCH_QUERY_THREAD_MAX_POOL_SIZE =
"search_query_thread_max_pool_size";
/**
* The size of the core thread pool for shortcut refreshing in GlobalSearch.
* @hide
*/
public static final String SEARCH_SHORTCUT_REFRESH_CORE_POOL_SIZE =
"search_shortcut_refresh_core_pool_size";
/**
* The maximum size of the thread pool for shortcut refreshing in GlobalSearch.
* @hide
*/
public static final String SEARCH_SHORTCUT_REFRESH_MAX_POOL_SIZE =
"search_shortcut_refresh_max_pool_size";
/**
* The maximun time that excess threads in the GlobalSeach thread pools will
* wait before terminating.
* @hide
*/
public static final String SEARCH_THREAD_KEEPALIVE_SECONDS =
"search_thread_keepalive_seconds";
/**
* The maximum number of concurrent suggestion queries to each source.
* @hide
*/
public static final String SEARCH_PER_SOURCE_CONCURRENT_QUERY_LIMIT =
"search_per_source_concurrent_query_limit";
/**
* Whether or not alert sounds are played on MountService events. (0 = false, 1 = true)
* @hide
*/
public static final String MOUNT_PLAY_NOTIFICATION_SND = "mount_play_not_snd";
/**
* Whether or not UMS auto-starts on UMS host detection. (0 = false, 1 = true)
* @hide
*/
public static final String MOUNT_UMS_AUTOSTART = "mount_ums_autostart";
/**
* Whether or not a notification is displayed on UMS host detection. (0 = false, 1 = true)
* @hide
*/
public static final String MOUNT_UMS_PROMPT = "mount_ums_prompt";
/**
* Whether or not a notification is displayed while UMS is enabled. (0 = false, 1 = true)
* @hide
*/
public static final String MOUNT_UMS_NOTIFY_ENABLED = "mount_ums_notify_enabled";
/**
* If nonzero, ANRs in invisible background processes bring up a dialog.
* Otherwise, the process will be silently killed.
* @hide
*/
public static final String ANR_SHOW_BACKGROUND = "anr_show_background";
/**
* The {@link ComponentName} string of the service to be used as the voice recognition
* service.
*
* @hide
*/
public static final String VOICE_RECOGNITION_SERVICE = "voice_recognition_service";
/**
* Stores whether an user has consented to have apps verified through PAM.
* The value is boolean (1 or 0).
*
* @hide
*/
public static final String PACKAGE_VERIFIER_USER_CONSENT =
"package_verifier_user_consent";
/**
* The {@link ComponentName} string of the selected spell checker service which is
* one of the services managed by the text service manager.
*
* @hide
*/
public static final String SELECTED_SPELL_CHECKER = "selected_spell_checker";
/**
* The {@link ComponentName} string of the selected subtype of the selected spell checker
* service which is one of the services managed by the text service manager.
*
* @hide
*/
public static final String SELECTED_SPELL_CHECKER_SUBTYPE =
"selected_spell_checker_subtype";
/**
* The {@link ComponentName} string whether spell checker is enabled or not.
*
* @hide
*/
public static final String SPELL_CHECKER_ENABLED = "spell_checker_enabled";
/**
* What happens when the user presses the Power button while in-call
* and the screen is on.
* Values:
* 1 - The Power button turns off the screen and locks the device. (Default behavior)
* 2 - The Power button hangs up the current call.
*
* @hide
*/
public static final String INCALL_POWER_BUTTON_BEHAVIOR = "incall_power_button_behavior";
/**
* INCALL_POWER_BUTTON_BEHAVIOR value for "turn off screen".
* @hide
*/
public static final int INCALL_POWER_BUTTON_BEHAVIOR_SCREEN_OFF = 0x1;
/**
* INCALL_POWER_BUTTON_BEHAVIOR value for "hang up".
* @hide
*/
public static final int INCALL_POWER_BUTTON_BEHAVIOR_HANGUP = 0x2;
/**
* INCALL_POWER_BUTTON_BEHAVIOR default value.
* @hide
*/
public static final int INCALL_POWER_BUTTON_BEHAVIOR_DEFAULT =
INCALL_POWER_BUTTON_BEHAVIOR_SCREEN_OFF;
/**
* Whether the device should wake when the wake gesture sensor detects motion.
* @hide
*/
public static final String WAKE_GESTURE_ENABLED = "wake_gesture_enabled";
/**
* Whether the device should doze if configured.
* @hide
*/
public static final String DOZE_ENABLED = "doze_enabled";
/**
* The current night mode that has been selected by the user. Owned
* and controlled by UiModeManagerService. Constants are as per
* UiModeManager.
* @hide
*/
public static final String UI_NIGHT_MODE = "ui_night_mode";
/**
* Whether screensavers are enabled.
* @hide
*/
public static final String SCREENSAVER_ENABLED = "screensaver_enabled";
/**
* The user's chosen screensaver components.
*
* These will be launched by the PhoneWindowManager after a timeout when not on
* battery, or upon dock insertion (if SCREENSAVER_ACTIVATE_ON_DOCK is set to 1).
* @hide
*/
public static final String SCREENSAVER_COMPONENTS = "screensaver_components";
/**
* If screensavers are enabled, whether the screensaver should be automatically launched
* when the device is inserted into a (desk) dock.
* @hide
*/
public static final String SCREENSAVER_ACTIVATE_ON_DOCK = "screensaver_activate_on_dock";
/**
* If screensavers are enabled, whether the screensaver should be automatically launched
* when the screen times out when not on battery.
* @hide
*/
public static final String SCREENSAVER_ACTIVATE_ON_SLEEP = "screensaver_activate_on_sleep";
/**
* If screensavers are enabled, the default screensaver component.
* @hide
*/
public static final String SCREENSAVER_DEFAULT_COMPONENT = "screensaver_default_component";
/**
* The default NFC payment component
* @hide
*/
public static final String NFC_PAYMENT_DEFAULT_COMPONENT = "nfc_payment_default_component";
/**
* Whether NFC payment is handled by the foreground application or a default.
* @hide
*/
public static final String NFC_PAYMENT_FOREGROUND = "nfc_payment_foreground";
/**
* Specifies the package name currently configured to be the primary sms application
* @hide
*/
public static final String SMS_DEFAULT_APPLICATION = "sms_default_application";
/**
* Specifies the package name currently configured to be the default dialer application
* @hide
*/
public static final String DIALER_DEFAULT_APPLICATION = "dialer_default_application";
/**
* Specifies the package name currently configured to be the emergency assistance application
*
* @see android.telephony.TelephonyManager#ACTION_EMERGENCY_ASSISTANCE
*
* @hide
*/
public static final String EMERGENCY_ASSISTANCE_APPLICATION = "emergency_assistance_application";
/**
* Specifies whether the current app context on scren (assist data) will be sent to the
* assist application (active voice interaction service).
*
* @hide
*/
public static final String ASSIST_STRUCTURE_ENABLED = "assist_structure_enabled";
/**
* Specifies whether a screenshot of the screen contents will be sent to the assist
* application (active voice interaction service).
*
* @hide
*/
public static final String ASSIST_SCREENSHOT_ENABLED = "assist_screenshot_enabled";
/**
* Names of the service components that the current user has explicitly allowed to
* see all of the user's notifications, separated by ':'.
*
* @hide
*/
public static final String ENABLED_NOTIFICATION_LISTENERS = "enabled_notification_listeners";
/**
* Names of the packages that the current user has explicitly allowed to
* manage notification policy configuration, separated by ':'.
*
* @hide
*/
public static final String ENABLED_NOTIFICATION_POLICY_ACCESS_PACKAGES =
"enabled_notification_policy_access_packages";
/**
* @hide
*/
public static final String ENABLED_CONDITION_PROVIDERS = "enabled_condition_providers";
/** @hide */
public static final String BAR_SERVICE_COMPONENT = "bar_service_component";
/** @hide */
public static final String VOLUME_CONTROLLER_SERVICE_COMPONENT
= "volume_controller_service_component";
/** @hide */
public static final String IMMERSIVE_MODE_CONFIRMATIONS = "immersive_mode_confirmations";
/**
* This is the query URI for finding a print service to install.
*
* @hide
*/
public static final String PRINT_SERVICE_SEARCH_URI = "print_service_search_uri";
/**
* This is the query URI for finding a NFC payment service to install.
*
* @hide
*/
public static final String PAYMENT_SERVICE_SEARCH_URI = "payment_service_search_uri";
/**
* If enabled, apps should try to skip any introductory hints on first launch. This might
* apply to users that are already familiar with the environment or temporary users.
*
* "00:11:22,0;01:02:03:04,2"
* @hide
*/
public static final String BLUETOOTH_INTEROPERABILITY_LIST = "bluetooth_interoperability_list";
/**
* The policy for deciding when Wi-Fi should go to sleep (which will in
* turn switch to using the mobile data as an Internet connection).
*
*
* These values can be OR-ed together.
*/
public static final String STAY_ON_WHILE_PLUGGED_IN = "stay_on_while_plugged_in";
/**
* When the user has enable the option to have a "bug report" command
* in the power menu.
* @hide
*/
public static final String BUGREPORT_IN_POWER_MENU = "bugreport_in_power_menu";
/**
* Whether ADB is enabled.
*/
public static final String ADB_ENABLED = "adb_enabled";
/**
* Whether Views are allowed to save their attribute data.
* @hide
*/
public static final String DEBUG_VIEW_ATTRIBUTES = "debug_view_attributes";
/**
* Whether assisted GPS should be enabled or not.
* @hide
*/
public static final String ASSISTED_GPS_ENABLED = "assisted_gps_enabled";
/**
* Whether bluetooth is enabled/disabled
* 0=disabled. 1=enabled.
*/
public static final String BLUETOOTH_ON = "bluetooth_on";
/**
* CDMA Cell Broadcast SMS
* 0 = CDMA Cell Broadcast SMS disabled
* 1 = CDMA Cell Broadcast SMS enabled
* @hide
*/
public static final String CDMA_CELL_BROADCAST_SMS =
"cdma_cell_broadcast_sms";
/**
* The CDMA roaming mode 0 = Home Networks, CDMA default
* 1 = Roaming on Affiliated networks
* 2 = Roaming on any networks
* @hide
*/
public static final String CDMA_ROAMING_MODE = "roaming_settings";
/**
* The CDMA subscription mode 0 = RUIM/SIM (default)
* 1 = NV
* @hide
*/
public static final String CDMA_SUBSCRIPTION_MODE = "subscription_mode";
/** Inactivity timeout to track mobile data activity.
*
* If set to a positive integer, it indicates the inactivity timeout value in seconds to
* infer the data activity of mobile network. After a period of no activity on mobile
* networks with length specified by the timeout, an {@code ACTION_DATA_ACTIVITY_CHANGE}
* intent is fired to indicate a transition of network status from "active" to "idle". Any
* subsequent activity on mobile networks triggers the firing of {@code
* ACTION_DATA_ACTIVITY_CHANGE} intent indicating transition from "idle" to "active".
*
* Network activity refers to transmitting or receiving data on the network interfaces.
*
* Tracking is disabled if set to zero or negative value.
*
* @hide
*/
public static final String DATA_ACTIVITY_TIMEOUT_MOBILE = "data_activity_timeout_mobile";
/** Timeout to tracking Wifi data activity. Same as {@code DATA_ACTIVITY_TIMEOUT_MOBILE}
* but for Wifi network.
* @hide
*/
public static final String DATA_ACTIVITY_TIMEOUT_WIFI = "data_activity_timeout_wifi";
/**
* Whether or not data roaming is enabled. (0 = false, 1 = true)
*/
public static final String DATA_ROAMING = "data_roaming";
/**
* The value passed to a Mobile DataConnection via bringUp which defines the
* number of retries to preform when setting up the initial connection. The default
* value defined in DataConnectionTrackerBase#DEFAULT_MDC_INITIAL_RETRY is currently 1.
* @hide
*/
public static final String MDC_INITIAL_MAX_RETRY = "mdc_initial_max_retry";
/**
* Whether user has enabled development settings.
*/
public static final String DEVELOPMENT_SETTINGS_ENABLED = "development_settings_enabled";
/**
* Whether the device has been provisioned (0 = false, 1 = true)
*/
public static final String DEVICE_PROVISIONED = "device_provisioned";
/**
* The saved value for WindowManagerService.setForcedDisplayDensity().
* One integer in dpi. If unset, then use the real display density.
* @hide
*/
public static final String DISPLAY_DENSITY_FORCED = "display_density_forced";
/**
* The saved value for WindowManagerService.setForcedDisplaySize().
* Two integers separated by a comma. If unset, then use the real display size.
* @hide
*/
public static final String DISPLAY_SIZE_FORCED = "display_size_forced";
/**
* The saved value for WindowManagerService.setForcedDisplayScalingMode().
* 0 or unset if scaling is automatic, 1 if scaling is disabled.
* @hide
*/
public static final String DISPLAY_SCALING_FORCE = "display_scaling_force";
/**
* The maximum size, in bytes, of a download that the download manager will transfer over
* a non-wifi connection.
* @hide
*/
public static final String DOWNLOAD_MAX_BYTES_OVER_MOBILE =
"download_manager_max_bytes_over_mobile";
/**
* The recommended maximum size, in bytes, of a download that the download manager should
* transfer over a non-wifi connection. Over this size, the use will be warned, but will
* have the option to start the download over the mobile connection anyway.
* @hide
*/
public static final String DOWNLOAD_RECOMMENDED_MAX_BYTES_OVER_MOBILE =
"download_manager_recommended_max_bytes_over_mobile";
/**
* @deprecated Use {@link android.provider.Settings.Secure#INSTALL_NON_MARKET_APPS} instead
*/
@Deprecated
public static final String INSTALL_NON_MARKET_APPS = Secure.INSTALL_NON_MARKET_APPS;
/**
* Whether HDMI control shall be enabled. If disabled, no CEC/MHL command will be
* sent or processed. (0 = false, 1 = true)
* @hide
*/
public static final String HDMI_CONTROL_ENABLED = "hdmi_control_enabled";
/**
* Whether HDMI system audio is enabled. If enabled, TV internal speaker is muted,
* and the output is redirected to AV Receiver connected via
* {@Global#HDMI_SYSTEM_AUDIO_OUTPUT}.
* @hide
*/
public static final String HDMI_SYSTEM_AUDIO_ENABLED = "hdmi_system_audio_enabled";
/**
* Whether TV will automatically turn on upon reception of the CEC command
* <Text View On> or <Image View On>. (0 = false, 1 = true)
* @hide
*/
public static final String HDMI_CONTROL_AUTO_WAKEUP_ENABLED =
"hdmi_control_auto_wakeup_enabled";
/**
* Whether TV will also turn off other CEC devices when it goes to standby mode.
* (0 = false, 1 = true)
* @hide
*/
public static final String HDMI_CONTROL_AUTO_DEVICE_OFF_ENABLED =
"hdmi_control_auto_device_off_enabled";
/**
* Whether to use the DHCP client from Lollipop and earlier instead of the newer Android DHCP
* client.
* (0 = false, 1 = true)
* @hide
*/
public static final String LEGACY_DHCP_CLIENT = "legacy_dhcp_client";
/**
* Whether TV will switch to MHL port when a mobile device is plugged in.
* (0 = false, 1 = true)
* @hide
*/
public static final String MHL_INPUT_SWITCHING_ENABLED = "mhl_input_switching_enabled";
/**
* Whether TV will charge the mobile device connected at MHL port. (0 = false, 1 = true)
* @hide
*/
public static final String MHL_POWER_CHARGE_ENABLED = "mhl_power_charge_enabled";
/**
* Whether mobile data connections are allowed by the user. See
* ConnectivityManager for more info.
* @hide
*/
public static final String MOBILE_DATA = "mobile_data";
/**
* Whether the mobile data connection should remain active even when higher
* priority networks like WiFi are active, to help make network switching faster.
*
* See ConnectivityService for more info.
*
* (0 = disabled, 1 = enabled)
* @hide
*/
public static final String MOBILE_DATA_ALWAYS_ON = "mobile_data_always_on";
/** {@hide} */
public static final String NETSTATS_ENABLED = "netstats_enabled";
/** {@hide} */
public static final String NETSTATS_POLL_INTERVAL = "netstats_poll_interval";
/** {@hide} */
public static final String NETSTATS_TIME_CACHE_MAX_AGE = "netstats_time_cache_max_age";
/** {@hide} */
public static final String NETSTATS_GLOBAL_ALERT_BYTES = "netstats_global_alert_bytes";
/** {@hide} */
public static final String NETSTATS_SAMPLE_ENABLED = "netstats_sample_enabled";
/** {@hide} */
public static final String NETSTATS_DEV_BUCKET_DURATION = "netstats_dev_bucket_duration";
/** {@hide} */
public static final String NETSTATS_DEV_PERSIST_BYTES = "netstats_dev_persist_bytes";
/** {@hide} */
public static final String NETSTATS_DEV_ROTATE_AGE = "netstats_dev_rotate_age";
/** {@hide} */
public static final String NETSTATS_DEV_DELETE_AGE = "netstats_dev_delete_age";
/** {@hide} */
public static final String NETSTATS_UID_BUCKET_DURATION = "netstats_uid_bucket_duration";
/** {@hide} */
public static final String NETSTATS_UID_PERSIST_BYTES = "netstats_uid_persist_bytes";
/** {@hide} */
public static final String NETSTATS_UID_ROTATE_AGE = "netstats_uid_rotate_age";
/** {@hide} */
public static final String NETSTATS_UID_DELETE_AGE = "netstats_uid_delete_age";
/** {@hide} */
public static final String NETSTATS_UID_TAG_BUCKET_DURATION = "netstats_uid_tag_bucket_duration";
/** {@hide} */
public static final String NETSTATS_UID_TAG_PERSIST_BYTES = "netstats_uid_tag_persist_bytes";
/** {@hide} */
public static final String NETSTATS_UID_TAG_ROTATE_AGE = "netstats_uid_tag_rotate_age";
/** {@hide} */
public static final String NETSTATS_UID_TAG_DELETE_AGE = "netstats_uid_tag_delete_age";
/**
* User preference for which network(s) should be used. Only the
* connectivity service should touch this.
*/
public static final String NETWORK_PREFERENCE = "network_preference";
/**
* Which package name to use for network scoring. If null, or if the package is not a valid
* scorer app, external network scores will neither be requested nor accepted.
* @hide
*/
public static final String NETWORK_SCORER_APP = "network_scorer_app";
/**
* If the NITZ_UPDATE_DIFF time is exceeded then an automatic adjustment
* to SystemClock will be allowed even if NITZ_UPDATE_SPACING has not been
* exceeded.
* @hide
*/
public static final String NITZ_UPDATE_DIFF = "nitz_update_diff";
/**
* The length of time in milli-seconds that automatic small adjustments to
* SystemClock are ignored if NITZ_UPDATE_DIFF is not exceeded.
* @hide
*/
public static final String NITZ_UPDATE_SPACING = "nitz_update_spacing";
/** Preferred NTP server. {@hide} */
public static final String NTP_SERVER = "ntp_server";
/** Timeout in milliseconds to wait for NTP server. {@hide} */
public static final String NTP_TIMEOUT = "ntp_timeout";
/** {@hide} */
public static final String STORAGE_BENCHMARK_INTERVAL = "storage_benchmark_interval";
/**
* Whether the package manager should send package verification broadcasts for verifiers to
* review apps prior to installation.
* 1 = request apps to be verified prior to installation, if a verifier exists.
* 0 = do not verify apps before installation
* @hide
*/
public static final String PACKAGE_VERIFIER_ENABLE = "package_verifier_enable";
/** Timeout for package verification.
* @hide */
public static final String PACKAGE_VERIFIER_TIMEOUT = "verifier_timeout";
/** Default response code for package verification.
* @hide */
public static final String PACKAGE_VERIFIER_DEFAULT_RESPONSE = "verifier_default_response";
/**
* Show package verification setting in the Settings app.
* 1 = show (default)
* 0 = hide
* @hide
*/
public static final String PACKAGE_VERIFIER_SETTING_VISIBLE = "verifier_setting_visible";
/**
* Run package verification on apps installed through ADB/ADT/USB
* 1 = perform package verification on ADB installs (default)
* 0 = bypass package verification on ADB installs
* @hide
*/
public static final String PACKAGE_VERIFIER_INCLUDE_ADB = "verifier_verify_adb_installs";
/**
* Time since last fstrim (milliseconds) after which we force one to happen
* during device startup. If unset, the default is 3 days.
* @hide
*/
public static final String FSTRIM_MANDATORY_INTERVAL = "fstrim_mandatory_interval";
/**
* The interval in milliseconds at which to check packet counts on the
* mobile data interface when screen is on, to detect possible data
* connection problems.
* @hide
*/
public static final String PDP_WATCHDOG_POLL_INTERVAL_MS =
"pdp_watchdog_poll_interval_ms";
/**
* The interval in milliseconds at which to check packet counts on the
* mobile data interface when screen is off, to detect possible data
* connection problems.
* @hide
*/
public static final String PDP_WATCHDOG_LONG_POLL_INTERVAL_MS =
"pdp_watchdog_long_poll_interval_ms";
/**
* The interval in milliseconds at which to check packet counts on the
* mobile data interface after {@link #PDP_WATCHDOG_TRIGGER_PACKET_COUNT}
* outgoing packets has been reached without incoming packets.
* @hide
*/
public static final String PDP_WATCHDOG_ERROR_POLL_INTERVAL_MS =
"pdp_watchdog_error_poll_interval_ms";
/**
* The number of outgoing packets sent without seeing an incoming packet
* that triggers a countdown (of {@link #PDP_WATCHDOG_ERROR_POLL_COUNT}
* device is logged to the event log
* @hide
*/
public static final String PDP_WATCHDOG_TRIGGER_PACKET_COUNT =
"pdp_watchdog_trigger_packet_count";
/**
* The number of polls to perform (at {@link #PDP_WATCHDOG_ERROR_POLL_INTERVAL_MS})
* after hitting {@link #PDP_WATCHDOG_TRIGGER_PACKET_COUNT} before
* attempting data connection recovery.
* @hide
*/
public static final String PDP_WATCHDOG_ERROR_POLL_COUNT =
"pdp_watchdog_error_poll_count";
/**
* The number of failed PDP reset attempts before moving to something more
* drastic: re-registering to the network.
* @hide
*/
public static final String PDP_WATCHDOG_MAX_PDP_RESET_FAIL_COUNT =
"pdp_watchdog_max_pdp_reset_fail_count";
/**
* A positive value indicates how often the SamplingProfiler
* should take snapshots. Zero value means SamplingProfiler
* is disabled.
*
* @hide
*/
public static final String SAMPLING_PROFILER_MS = "sampling_profiler_ms";
/**
* URL to open browser on to allow user to manage a prepay account
* @hide
*/
public static final String SETUP_PREPAID_DATA_SERVICE_URL =
"setup_prepaid_data_service_url";
/**
* URL to attempt a GET on to see if this is a prepay device
* @hide
*/
public static final String SETUP_PREPAID_DETECTION_TARGET_URL =
"setup_prepaid_detection_target_url";
/**
* Host to check for a redirect to after an attempt to GET
* SETUP_PREPAID_DETECTION_TARGET_URL. (If we redirected there,
* this is a prepaid device with zero balance.)
* @hide
*/
public static final String SETUP_PREPAID_DETECTION_REDIR_HOST =
"setup_prepaid_detection_redir_host";
/**
* The interval in milliseconds at which to check the number of SMS sent out without asking
* for use permit, to limit the un-authorized SMS usage.
*
* @hide
*/
public static final String SMS_OUTGOING_CHECK_INTERVAL_MS =
"sms_outgoing_check_interval_ms";
/**
* The number of outgoing SMS sent without asking for user permit (of {@link
* #SMS_OUTGOING_CHECK_INTERVAL_MS}
*
* @hide
*/
public static final String SMS_OUTGOING_CHECK_MAX_COUNT =
"sms_outgoing_check_max_count";
/**
* Used to disable SMS short code confirmation - defaults to true.
* True indcates we will do the check, etc. Set to false to disable.
* @see com.android.internal.telephony.SmsUsageMonitor
* @hide
*/
public static final String SMS_SHORT_CODE_CONFIRMATION = "sms_short_code_confirmation";
/**
* Used to select which country we use to determine premium sms codes.
* One of com.android.internal.telephony.SMSDispatcher.PREMIUM_RULE_USE_SIM,
* com.android.internal.telephony.SMSDispatcher.PREMIUM_RULE_USE_NETWORK,
* or com.android.internal.telephony.SMSDispatcher.PREMIUM_RULE_USE_BOTH.
* @hide
*/
public static final String SMS_SHORT_CODE_RULE = "sms_short_code_rule";
/**
* Used to select TCP's default initial receiver window size in segments - defaults to a build config value
* @hide
*/
public static final String TCP_DEFAULT_INIT_RWND = "tcp_default_init_rwnd";
/**
* Used to disable Tethering on a device - defaults to true
* @hide
*/
public static final String TETHER_SUPPORTED = "tether_supported";
/**
* Used to require DUN APN on the device or not - defaults to a build config value
* which defaults to false
* @hide
*/
public static final String TETHER_DUN_REQUIRED = "tether_dun_required";
/**
* Used to hold a gservices-provisioned apn value for DUN. If set, or the
* corresponding build config values are set it will override the APN DB
* values.
* Consists of a comma seperated list of strings:
* "name,apn,proxy,port,username,password,server,mmsc,mmsproxy,mmsport,mcc,mnc,auth,type"
* note that empty fields can be ommitted: "name,apn,,,,,,,,,310,260,,DUN"
* @hide
*/
public static final String TETHER_DUN_APN = "tether_dun_apn";
/**
* USB Mass Storage Enabled
*/
public static final String USB_MASS_STORAGE_ENABLED = "usb_mass_storage_enabled";
/**
* If this setting is set (to anything), then all references
* to Gmail on the device must change to Google Mail.
*/
public static final String USE_GOOGLE_MAIL = "use_google_mail";
/**
* Webview Data reduction proxy key.
* @hide
*/
public static final String WEBVIEW_DATA_REDUCTION_PROXY_KEY =
"webview_data_reduction_proxy_key";
/**
* Whether Wifi display is enabled/disabled
* 0=disabled. 1=enabled.
* @hide
*/
public static final String WIFI_DISPLAY_ON = "wifi_display_on";
/**
* Whether Wifi display certification mode is enabled/disabled
* 0=disabled. 1=enabled.
* @hide
*/
public static final String WIFI_DISPLAY_CERTIFICATION_ON =
"wifi_display_certification_on";
/**
* WPS Configuration method used by Wifi display, this setting only
* takes effect when WIFI_DISPLAY_CERTIFICATION_ON is 1 (enabled).
*
* Possible values are:
*
* WpsInfo.INVALID: use default WPS method chosen by framework
* WpsInfo.PBC : use Push button
* WpsInfo.KEYPAD : use Keypad
* WpsInfo.DISPLAY: use Display
* @hide
*/
public static final String WIFI_DISPLAY_WPS_CONFIG =
"wifi_display_wps_config";
/**
* Whether to notify the user of open networks.
*
*
1280x720/213: make one overlay that is 1280x720 at 213dpi.1920x1080/320;1280x720/213: make two overlays, the first
* at 1080p and the second at 720p.
* inactive_to (long)
* sensing_to (long)
* motion_inactive_to (long)
* idle_after_inactive_to (long)
* idle_pending_to (long)
* max_idle_pending_to (long)
* idle_pending_factor (float)
* idle_to (long)
* max_idle_to (long)
* idle_factor (float)
* min_time_to_alarm (long)
* max_temp_app_whitelist_duration (long)
*
*
*
* idle_duration2 (long)
* wallclock_threshold (long)
* parole_interval (long)
* parole_duration (long)
*
* idle_duration (long) // This is deprecated and used to circumvent b/26355386.
*
*
*
* min_futurity (long)
* min_interval (long)
* allow_while_idle_short_time (long)
* allow_while_idle_long_time (long)
* allow_while_idle_whitelist_duration (long)
*
*
*