1 /*************************************************
2 * PCRE testing program *
3 *************************************************/
4
5 /* This program was hacked up as a tester for PCRE. I really should have
6 written it more tidily in the first place. Will I ever learn? It has grown and
7 been extended and consequently is now rather, er, *very* untidy in places. The
8 addition of 16-bit support has made it even worse. :-(
9
10 -----------------------------------------------------------------------------
11 Redistribution and use in source and binary forms, with or without
12 modification, are permitted provided that the following conditions are met:
13
14 * Redistributions of source code must retain the above copyright notice,
15 this list of conditions and the following disclaimer.
16
17 * Redistributions in binary form must reproduce the above copyright
18 notice, this list of conditions and the following disclaimer in the
19 documentation and/or other materials provided with the distribution.
20
21 * Neither the name of the University of Cambridge nor the names of its
22 contributors may be used to endorse or promote products derived from
23 this software without specific prior written permission.
24
25 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
26 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
27 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
28 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
29 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
30 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
31 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
32 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
33 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
34 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
35 POSSIBILITY OF SUCH DAMAGE.
36 -----------------------------------------------------------------------------
37 */
38
39 /* This program now supports the testing of all of the 8-bit, 16-bit, and
40 32-bit PCRE libraries in a single program. This is different from the modules
41 such as pcre_compile.c in the library itself, which are compiled separately for
42 each mode. If two modes are enabled, for example, pcre_compile.c is compiled
43 twice. By contrast, pcretest.c is compiled only once. Therefore, it must not
44 make use of any of the macros from pcre_internal.h that depend on
45 COMPILE_PCRE8, COMPILE_PCRE16, or COMPILE_PCRE32. It does, however, make use of
46 SUPPORT_PCRE8, SUPPORT_PCRE16, and SUPPORT_PCRE32 to ensure that it calls only
47 supported library functions. */
48
49 #ifdef HAVE_CONFIG_H
50 #include "config.h"
51 #endif
52
53 #include <ctype.h>
54 #include <stdio.h>
55 #include <string.h>
56 #include <stdlib.h>
57 #include <time.h>
58 #include <locale.h>
59 #include <errno.h>
60
61 /* Both libreadline and libedit are optionally supported. The user-supplied
62 original patch uses readline/readline.h for libedit, but in at least one system
63 it is installed as editline/readline.h, so the configuration code now looks for
64 that first, falling back to readline/readline.h. */
65
66 #if defined(SUPPORT_LIBREADLINE) || defined(SUPPORT_LIBEDIT)
67 #ifdef HAVE_UNISTD_H
68 #include <unistd.h>
69 #endif
70 #if defined(SUPPORT_LIBREADLINE)
71 #include <readline/readline.h>
72 #include <readline/history.h>
73 #else
74 #if defined(HAVE_EDITLINE_READLINE_H)
75 #include <editline/readline.h>
76 #else
77 #include <readline/readline.h>
78 #endif
79 #endif
80 #endif
81
82 /* A number of things vary for Windows builds. Originally, pcretest opened its
83 input and output without "b"; then I was told that "b" was needed in some
84 environments, so it was added for release 5.0 to both the input and output. (It
85 makes no difference on Unix-like systems.) Later I was told that it is wrong
86 for the input on Windows. I've now abstracted the modes into two macros that
87 are set here, to make it easier to fiddle with them, and removed "b" from the
88 input mode under Windows. */
89
90 #if defined(_WIN32) || defined(WIN32)
91 #include <io.h> /* For _setmode() */
92 #include <fcntl.h> /* For _O_BINARY */
93 #define INPUT_MODE "r"
94 #define OUTPUT_MODE "wb"
95
96 #ifndef isatty
97 #define isatty _isatty /* This is what Windows calls them, I'm told, */
98 #endif /* though in some environments they seem to */
99 /* be already defined, hence the #ifndefs. */
100 #ifndef fileno
101 #define fileno _fileno
102 #endif
103
104 /* A user sent this fix for Borland Builder 5 under Windows. */
105
106 #ifdef __BORLANDC__
107 #define _setmode(handle, mode) setmode(handle, mode)
108 #endif
109
110 /* Not Windows */
111
112 #else
113 #include <sys/time.h> /* These two includes are needed */
114 #include <sys/resource.h> /* for setrlimit(). */
115 #if defined NATIVE_ZOS /* z/OS uses non-binary I/O */
116 #define INPUT_MODE "r"
117 #define OUTPUT_MODE "w"
118 #else
119 #define INPUT_MODE "rb"
120 #define OUTPUT_MODE "wb"
121 #endif
122 #endif
123
124 #ifdef __VMS
125 #include <ssdef.h>
126 void vms_setsymbol( char *, char *, int );
127 #endif
128
129
130 #define PRIV(name) name
131
132 /* We have to include pcre_internal.h because we need the internal info for
133 displaying the results of pcre_study() and we also need to know about the
134 internal macros, structures, and other internal data values; pcretest has
135 "inside information" compared to a program that strictly follows the PCRE API.
136
137 Although pcre_internal.h does itself include pcre.h, we explicitly include it
138 here before pcre_internal.h so that the PCRE_EXP_xxx macros get set
139 appropriately for an application, not for building PCRE. */
140
141 #include "pcre.h"
142 #include "pcre_internal.h"
143
144 /* The pcre_printint() function, which prints the internal form of a compiled
145 regex, is held in a separate file so that (a) it can be compiled in either
146 8-, 16- or 32-bit mode, and (b) it can be #included directly in pcre_compile.c
147 when that is compiled in debug mode. */
148
149 #ifdef SUPPORT_PCRE8
150 void pcre_printint(pcre *external_re, FILE *f, BOOL print_lengths);
151 #endif
152 #ifdef SUPPORT_PCRE16
153 void pcre16_printint(pcre *external_re, FILE *f, BOOL print_lengths);
154 #endif
155 #ifdef SUPPORT_PCRE32
156 void pcre32_printint(pcre *external_re, FILE *f, BOOL print_lengths);
157 #endif
158
159 /* We need access to some of the data tables that PCRE uses. So as not to have
160 to keep two copies, we include the source files here, changing the names of the
161 external symbols to prevent clashes. */
162
163 #define PCRE_INCLUDED
164
165 #include "pcre_tables.c"
166 #include "pcre_ucd.c"
167
168 /* The definition of the macro PRINTABLE, which determines whether to print an
169 output character as-is or as a hex value when showing compiled patterns, is
170 the same as in the printint.src file. We uses it here in cases when the locale
171 has not been explicitly changed, so as to get consistent output from systems
172 that differ in their output from isprint() even in the "C" locale. */
173
174 #ifdef EBCDIC
175 #define PRINTABLE(c) ((c) >= 64 && (c) < 255)
176 #else
177 #define PRINTABLE(c) ((c) >= 32 && (c) < 127)
178 #endif
179
180 #define PRINTOK(c) (locale_set? isprint(c) : PRINTABLE(c))
181
182 /* Posix support is disabled in 16 or 32 bit only mode. */
183 #if !defined SUPPORT_PCRE8 && !defined NOPOSIX
184 #define NOPOSIX
185 #endif
186
187 /* It is possible to compile this test program without including support for
188 testing the POSIX interface, though this is not available via the standard
189 Makefile. */
190
191 #if !defined NOPOSIX
192 #include "pcreposix.h"
193 #endif
194
195 /* It is also possible, originally for the benefit of a version that was
196 imported into Exim, to build pcretest without support for UTF8 or UTF16 (define
197 NOUTF), without the interface to the DFA matcher (NODFA). In fact, we
198 automatically cut out the UTF support if PCRE is built without it. */
199
200 #ifndef SUPPORT_UTF
201 #ifndef NOUTF
202 #define NOUTF
203 #endif
204 #endif
205
206 /* To make the code a bit tidier for 8/16/32-bit support, we define macros
207 for all the pcre[16]_xxx functions (except pcre16_fullinfo, which is called
208 only from one place and is handled differently). I couldn't dream up any way of
209 using a single macro to do this in a generic way, because of the many different
210 argument requirements. We know that at least one of SUPPORT_PCRE8 and
211 SUPPORT_PCRE16 must be set. First define macros for each individual mode; then
212 use these in the definitions of generic macros.
213
214 **** Special note about the PCHARSxxx macros: the address of the string to be
215 printed is always given as two arguments: a base address followed by an offset.
216 The base address is cast to the correct data size for 8 or 16 bit data; the
217 offset is in units of this size. If the string were given as base+offset in one
218 argument, the casting might be incorrectly applied. */
219
220 #ifdef SUPPORT_PCRE8
221
222 #define PCHARS8(lv, p, offset, len, f) \
223 lv = pchars((pcre_uint8 *)(p) + offset, len, f)
224
225 #define PCHARSV8(p, offset, len, f) \
226 (void)pchars((pcre_uint8 *)(p) + offset, len, f)
227
228 #define READ_CAPTURE_NAME8(p, cn8, cn16, cn32, re) \
229 p = read_capture_name8(p, cn8, re)
230
231 #define STRLEN8(p) ((int)strlen((char *)p))
232
233 #define SET_PCRE_CALLOUT8(callout) \
234 pcre_callout = callout
235
236 #define SET_PCRE_STACK_GUARD8(stack_guard) \
237 pcre_stack_guard = stack_guard
238
239 #define PCRE_ASSIGN_JIT_STACK8(extra, callback, userdata) \
240 pcre_assign_jit_stack(extra, callback, userdata)
241
242 #define PCRE_COMPILE8(re, pat, options, error, erroffset, tables) \
243 re = pcre_compile((char *)pat, options, error, erroffset, tables)
244
245 #define PCRE_COPY_NAMED_SUBSTRING8(rc, re, bptr, offsets, count, \
246 namesptr, cbuffer, size) \
247 rc = pcre_copy_named_substring(re, (char *)bptr, offsets, count, \
248 (char *)namesptr, cbuffer, size)
249
250 #define PCRE_COPY_SUBSTRING8(rc, bptr, offsets, count, i, cbuffer, size) \
251 rc = pcre_copy_substring((char *)bptr, offsets, count, i, cbuffer, size)
252
253 #define PCRE_DFA_EXEC8(count, re, extra, bptr, len, start_offset, options, \
254 offsets, size_offsets, workspace, size_workspace) \
255 count = pcre_dfa_exec(re, extra, (char *)bptr, len, start_offset, options, \
256 offsets, size_offsets, workspace, size_workspace)
257
258 #define PCRE_EXEC8(count, re, extra, bptr, len, start_offset, options, \
259 offsets, size_offsets) \
260 count = pcre_exec(re, extra, (char *)bptr, len, start_offset, options, \
261 offsets, size_offsets)
262
263 #define PCRE_FREE_STUDY8(extra) \
264 pcre_free_study(extra)
265
266 #define PCRE_FREE_SUBSTRING8(substring) \
267 pcre_free_substring(substring)
268
269 #define PCRE_FREE_SUBSTRING_LIST8(listptr) \
270 pcre_free_substring_list(listptr)
271
272 #define PCRE_GET_NAMED_SUBSTRING8(rc, re, bptr, offsets, count, \
273 getnamesptr, subsptr) \
274 rc = pcre_get_named_substring(re, (char *)bptr, offsets, count, \
275 (char *)getnamesptr, subsptr)
276
277 #define PCRE_GET_STRINGNUMBER8(n, rc, ptr) \
278 n = pcre_get_stringnumber(re, (char *)ptr)
279
280 #define PCRE_GET_SUBSTRING8(rc, bptr, offsets, count, i, subsptr) \
281 rc = pcre_get_substring((char *)bptr, offsets, count, i, subsptr)
282
283 #define PCRE_GET_SUBSTRING_LIST8(rc, bptr, offsets, count, listptr) \
284 rc = pcre_get_substring_list((const char *)bptr, offsets, count, listptr)
285
286 #define PCRE_PATTERN_TO_HOST_BYTE_ORDER8(rc, re, extra, tables) \
287 rc = pcre_pattern_to_host_byte_order(re, extra, tables)
288
289 #define PCRE_PRINTINT8(re, outfile, debug_lengths) \
290 pcre_printint(re, outfile, debug_lengths)
291
292 #define PCRE_STUDY8(extra, re, options, error) \
293 extra = pcre_study(re, options, error)
294
295 #define PCRE_JIT_STACK_ALLOC8(startsize, maxsize) \
296 pcre_jit_stack_alloc(startsize, maxsize)
297
298 #define PCRE_JIT_STACK_FREE8(stack) \
299 pcre_jit_stack_free(stack)
300
301 #define pcre8_maketables pcre_maketables
302
303 #endif /* SUPPORT_PCRE8 */
304
305 /* -----------------------------------------------------------*/
306
307 #ifdef SUPPORT_PCRE16
308
309 #define PCHARS16(lv, p, offset, len, f) \
310 lv = pchars16((PCRE_SPTR16)(p) + offset, len, f)
311
312 #define PCHARSV16(p, offset, len, f) \
313 (void)pchars16((PCRE_SPTR16)(p) + offset, len, f)
314
315 #define READ_CAPTURE_NAME16(p, cn8, cn16, cn32, re) \
316 p = read_capture_name16(p, cn16, re)
317
318 #define STRLEN16(p) ((int)strlen16((PCRE_SPTR16)p))
319
320 #define SET_PCRE_CALLOUT16(callout) \
321 pcre16_callout = (int (*)(pcre16_callout_block *))callout
322
323 #define SET_PCRE_STACK_GUARD16(stack_guard) \
324 pcre16_stack_guard = (int (*)(void))stack_guard
325
326 #define PCRE_ASSIGN_JIT_STACK16(extra, callback, userdata) \
327 pcre16_assign_jit_stack((pcre16_extra *)extra, \
328 (pcre16_jit_callback)callback, userdata)
329
330 #define PCRE_COMPILE16(re, pat, options, error, erroffset, tables) \
331 re = (pcre *)pcre16_compile((PCRE_SPTR16)pat, options, error, erroffset, \
332 tables)
333
334 #define PCRE_COPY_NAMED_SUBSTRING16(rc, re, bptr, offsets, count, \
335 namesptr, cbuffer, size) \
336 rc = pcre16_copy_named_substring((pcre16 *)re, (PCRE_SPTR16)bptr, offsets, \
337 count, (PCRE_SPTR16)namesptr, (PCRE_UCHAR16 *)cbuffer, size/2)
338
339 #define PCRE_COPY_SUBSTRING16(rc, bptr, offsets, count, i, cbuffer, size) \
340 rc = pcre16_copy_substring((PCRE_SPTR16)bptr, offsets, count, i, \
341 (PCRE_UCHAR16 *)cbuffer, size/2)
342
343 #define PCRE_DFA_EXEC16(count, re, extra, bptr, len, start_offset, options, \
344 offsets, size_offsets, workspace, size_workspace) \
345 count = pcre16_dfa_exec((pcre16 *)re, (pcre16_extra *)extra, \
346 (PCRE_SPTR16)bptr, len, start_offset, options, offsets, size_offsets, \
347 workspace, size_workspace)
348
349 #define PCRE_EXEC16(count, re, extra, bptr, len, start_offset, options, \
350 offsets, size_offsets) \
351 count = pcre16_exec((pcre16 *)re, (pcre16_extra *)extra, (PCRE_SPTR16)bptr, \
352 len, start_offset, options, offsets, size_offsets)
353
354 #define PCRE_FREE_STUDY16(extra) \
355 pcre16_free_study((pcre16_extra *)extra)
356
357 #define PCRE_FREE_SUBSTRING16(substring) \
358 pcre16_free_substring((PCRE_SPTR16)substring)
359
360 #define PCRE_FREE_SUBSTRING_LIST16(listptr) \
361 pcre16_free_substring_list((PCRE_SPTR16 *)listptr)
362
363 #define PCRE_GET_NAMED_SUBSTRING16(rc, re, bptr, offsets, count, \
364 getnamesptr, subsptr) \
365 rc = pcre16_get_named_substring((pcre16 *)re, (PCRE_SPTR16)bptr, offsets, \
366 count, (PCRE_SPTR16)getnamesptr, (PCRE_SPTR16 *)(void*)subsptr)
367
368 #define PCRE_GET_STRINGNUMBER16(n, rc, ptr) \
369 n = pcre16_get_stringnumber(re, (PCRE_SPTR16)ptr)
370
371 #define PCRE_GET_SUBSTRING16(rc, bptr, offsets, count, i, subsptr) \
372 rc = pcre16_get_substring((PCRE_SPTR16)bptr, offsets, count, i, \
373 (PCRE_SPTR16 *)(void*)subsptr)
374
375 #define PCRE_GET_SUBSTRING_LIST16(rc, bptr, offsets, count, listptr) \
376 rc = pcre16_get_substring_list((PCRE_SPTR16)bptr, offsets, count, \
377 (PCRE_SPTR16 **)(void*)listptr)
378
379 #define PCRE_PATTERN_TO_HOST_BYTE_ORDER16(rc, re, extra, tables) \
380 rc = pcre16_pattern_to_host_byte_order((pcre16 *)re, (pcre16_extra *)extra, \
381 tables)
382
383 #define PCRE_PRINTINT16(re, outfile, debug_lengths) \
384 pcre16_printint(re, outfile, debug_lengths)
385
386 #define PCRE_STUDY16(extra, re, options, error) \
387 extra = (pcre_extra *)pcre16_study((pcre16 *)re, options, error)
388
389 #define PCRE_JIT_STACK_ALLOC16(startsize, maxsize) \
390 (pcre_jit_stack *)pcre16_jit_stack_alloc(startsize, maxsize)
391
392 #define PCRE_JIT_STACK_FREE16(stack) \
393 pcre16_jit_stack_free((pcre16_jit_stack *)stack)
394
395 #endif /* SUPPORT_PCRE16 */
396
397 /* -----------------------------------------------------------*/
398
399 #ifdef SUPPORT_PCRE32
400
401 #define PCHARS32(lv, p, offset, len, f) \
402 lv = pchars32((PCRE_SPTR32)(p) + offset, len, use_utf, f)
403
404 #define PCHARSV32(p, offset, len, f) \
405 (void)pchars32((PCRE_SPTR32)(p) + offset, len, use_utf, f)
406
407 #define READ_CAPTURE_NAME32(p, cn8, cn16, cn32, re) \
408 p = read_capture_name32(p, cn32, re)
409
410 #define STRLEN32(p) ((int)strlen32((PCRE_SPTR32)p))
411
412 #define SET_PCRE_CALLOUT32(callout) \
413 pcre32_callout = (int (*)(pcre32_callout_block *))callout
414
415 #define SET_PCRE_STACK_GUARD32(stack_guard) \
416 pcre32_stack_guard = (int (*)(void))stack_guard
417
418 #define PCRE_ASSIGN_JIT_STACK32(extra, callback, userdata) \
419 pcre32_assign_jit_stack((pcre32_extra *)extra, \
420 (pcre32_jit_callback)callback, userdata)
421
422 #define PCRE_COMPILE32(re, pat, options, error, erroffset, tables) \
423 re = (pcre *)pcre32_compile((PCRE_SPTR32)pat, options, error, erroffset, \
424 tables)
425
426 #define PCRE_COPY_NAMED_SUBSTRING32(rc, re, bptr, offsets, count, \
427 namesptr, cbuffer, size) \
428 rc = pcre32_copy_named_substring((pcre32 *)re, (PCRE_SPTR32)bptr, offsets, \
429 count, (PCRE_SPTR32)namesptr, (PCRE_UCHAR32 *)cbuffer, size/2)
430
431 #define PCRE_COPY_SUBSTRING32(rc, bptr, offsets, count, i, cbuffer, size) \
432 rc = pcre32_copy_substring((PCRE_SPTR32)bptr, offsets, count, i, \
433 (PCRE_UCHAR32 *)cbuffer, size/2)
434
435 #define PCRE_DFA_EXEC32(count, re, extra, bptr, len, start_offset, options, \
436 offsets, size_offsets, workspace, size_workspace) \
437 count = pcre32_dfa_exec((pcre32 *)re, (pcre32_extra *)extra, \
438 (PCRE_SPTR32)bptr, len, start_offset, options, offsets, size_offsets, \
439 workspace, size_workspace)
440
441 #define PCRE_EXEC32(count, re, extra, bptr, len, start_offset, options, \
442 offsets, size_offsets) \
443 count = pcre32_exec((pcre32 *)re, (pcre32_extra *)extra, (PCRE_SPTR32)bptr, \
444 len, start_offset, options, offsets, size_offsets)
445
446 #define PCRE_FREE_STUDY32(extra) \
447 pcre32_free_study((pcre32_extra *)extra)
448
449 #define PCRE_FREE_SUBSTRING32(substring) \
450 pcre32_free_substring((PCRE_SPTR32)substring)
451
452 #define PCRE_FREE_SUBSTRING_LIST32(listptr) \
453 pcre32_free_substring_list((PCRE_SPTR32 *)listptr)
454
455 #define PCRE_GET_NAMED_SUBSTRING32(rc, re, bptr, offsets, count, \
456 getnamesptr, subsptr) \
457 rc = pcre32_get_named_substring((pcre32 *)re, (PCRE_SPTR32)bptr, offsets, \
458 count, (PCRE_SPTR32)getnamesptr, (PCRE_SPTR32 *)(void*)subsptr)
459
460 #define PCRE_GET_STRINGNUMBER32(n, rc, ptr) \
461 n = pcre32_get_stringnumber(re, (PCRE_SPTR32)ptr)
462
463 #define PCRE_GET_SUBSTRING32(rc, bptr, offsets, count, i, subsptr) \
464 rc = pcre32_get_substring((PCRE_SPTR32)bptr, offsets, count, i, \
465 (PCRE_SPTR32 *)(void*)subsptr)
466
467 #define PCRE_GET_SUBSTRING_LIST32(rc, bptr, offsets, count, listptr) \
468 rc = pcre32_get_substring_list((PCRE_SPTR32)bptr, offsets, count, \
469 (PCRE_SPTR32 **)(void*)listptr)
470
471 #define PCRE_PATTERN_TO_HOST_BYTE_ORDER32(rc, re, extra, tables) \
472 rc = pcre32_pattern_to_host_byte_order((pcre32 *)re, (pcre32_extra *)extra, \
473 tables)
474
475 #define PCRE_PRINTINT32(re, outfile, debug_lengths) \
476 pcre32_printint(re, outfile, debug_lengths)
477
478 #define PCRE_STUDY32(extra, re, options, error) \
479 extra = (pcre_extra *)pcre32_study((pcre32 *)re, options, error)
480
481 #define PCRE_JIT_STACK_ALLOC32(startsize, maxsize) \
482 (pcre_jit_stack *)pcre32_jit_stack_alloc(startsize, maxsize)
483
484 #define PCRE_JIT_STACK_FREE32(stack) \
485 pcre32_jit_stack_free((pcre32_jit_stack *)stack)
486
487 #endif /* SUPPORT_PCRE32 */
488
489
490 /* ----- More than one mode is supported; a runtime test is needed, except for
491 pcre_config(), and the JIT stack functions, when it doesn't matter which
492 available version is called. ----- */
493
494 enum {
495 PCRE8_MODE,
496 PCRE16_MODE,
497 PCRE32_MODE
498 };
499
500 #if (defined (SUPPORT_PCRE8) + defined (SUPPORT_PCRE16) + \
501 defined (SUPPORT_PCRE32)) >= 2
502
503 #define CHAR_SIZE (1 << pcre_mode)
504
505 /* There doesn't seem to be an easy way of writing these macros that can cope
506 with the 3 pairs of bit sizes plus all three bit sizes. So just handle all the
507 cases separately. */
508
509 /* ----- All three modes supported ----- */
510
511 #if defined(SUPPORT_PCRE8) && defined(SUPPORT_PCRE16) && defined(SUPPORT_PCRE32)
512
513 #define PCHARS(lv, p, offset, len, f) \
514 if (pcre_mode == PCRE32_MODE) \
515 PCHARS32(lv, p, offset, len, f); \
516 else if (pcre_mode == PCRE16_MODE) \
517 PCHARS16(lv, p, offset, len, f); \
518 else \
519 PCHARS8(lv, p, offset, len, f)
520
521 #define PCHARSV(p, offset, len, f) \
522 if (pcre_mode == PCRE32_MODE) \
523 PCHARSV32(p, offset, len, f); \
524 else if (pcre_mode == PCRE16_MODE) \
525 PCHARSV16(p, offset, len, f); \
526 else \
527 PCHARSV8(p, offset, len, f)
528
529 #define READ_CAPTURE_NAME(p, cn8, cn16, cn32, re) \
530 if (pcre_mode == PCRE32_MODE) \
531 READ_CAPTURE_NAME32(p, cn8, cn16, cn32, re); \
532 else if (pcre_mode == PCRE16_MODE) \
533 READ_CAPTURE_NAME16(p, cn8, cn16, cn32, re); \
534 else \
535 READ_CAPTURE_NAME8(p, cn8, cn16, cn32, re)
536
537 #define SET_PCRE_CALLOUT(callout) \
538 if (pcre_mode == PCRE32_MODE) \
539 SET_PCRE_CALLOUT32(callout); \
540 else if (pcre_mode == PCRE16_MODE) \
541 SET_PCRE_CALLOUT16(callout); \
542 else \
543 SET_PCRE_CALLOUT8(callout)
544
545 #define SET_PCRE_STACK_GUARD(stack_guard) \
546 if (pcre_mode == PCRE32_MODE) \
547 SET_PCRE_STACK_GUARD32(stack_guard); \
548 else if (pcre_mode == PCRE16_MODE) \
549 SET_PCRE_STACK_GUARD16(stack_guard); \
550 else \
551 SET_PCRE_STACK_GUARD8(stack_guard)
552
553 #define STRLEN(p) (pcre_mode == PCRE32_MODE ? STRLEN32(p) : pcre_mode == PCRE16_MODE ? STRLEN16(p) : STRLEN8(p))
554
555 #define PCRE_ASSIGN_JIT_STACK(extra, callback, userdata) \
556 if (pcre_mode == PCRE32_MODE) \
557 PCRE_ASSIGN_JIT_STACK32(extra, callback, userdata); \
558 else if (pcre_mode == PCRE16_MODE) \
559 PCRE_ASSIGN_JIT_STACK16(extra, callback, userdata); \
560 else \
561 PCRE_ASSIGN_JIT_STACK8(extra, callback, userdata)
562
563 #define PCRE_COMPILE(re, pat, options, error, erroffset, tables) \
564 if (pcre_mode == PCRE32_MODE) \
565 PCRE_COMPILE32(re, pat, options, error, erroffset, tables); \
566 else if (pcre_mode == PCRE16_MODE) \
567 PCRE_COMPILE16(re, pat, options, error, erroffset, tables); \
568 else \
569 PCRE_COMPILE8(re, pat, options, error, erroffset, tables)
570
571 #define PCRE_CONFIG pcre_config
572
573 #define PCRE_COPY_NAMED_SUBSTRING(rc, re, bptr, offsets, count, \
574 namesptr, cbuffer, size) \
575 if (pcre_mode == PCRE32_MODE) \
576 PCRE_COPY_NAMED_SUBSTRING32(rc, re, bptr, offsets, count, \
577 namesptr, cbuffer, size); \
578 else if (pcre_mode == PCRE16_MODE) \
579 PCRE_COPY_NAMED_SUBSTRING16(rc, re, bptr, offsets, count, \
580 namesptr, cbuffer, size); \
581 else \
582 PCRE_COPY_NAMED_SUBSTRING8(rc, re, bptr, offsets, count, \
583 namesptr, cbuffer, size)
584
585 #define PCRE_COPY_SUBSTRING(rc, bptr, offsets, count, i, cbuffer, size) \
586 if (pcre_mode == PCRE32_MODE) \
587 PCRE_COPY_SUBSTRING32(rc, bptr, offsets, count, i, cbuffer, size); \
588 else if (pcre_mode == PCRE16_MODE) \
589 PCRE_COPY_SUBSTRING16(rc, bptr, offsets, count, i, cbuffer, size); \
590 else \
591 PCRE_COPY_SUBSTRING8(rc, bptr, offsets, count, i, cbuffer, size)
592
593 #define PCRE_DFA_EXEC(count, re, extra, bptr, len, start_offset, options, \
594 offsets, size_offsets, workspace, size_workspace) \
595 if (pcre_mode == PCRE32_MODE) \
596 PCRE_DFA_EXEC32(count, re, extra, bptr, len, start_offset, options, \
597 offsets, size_offsets, workspace, size_workspace); \
598 else if (pcre_mode == PCRE16_MODE) \
599 PCRE_DFA_EXEC16(count, re, extra, bptr, len, start_offset, options, \
600 offsets, size_offsets, workspace, size_workspace); \
601 else \
602 PCRE_DFA_EXEC8(count, re, extra, bptr, len, start_offset, options, \
603 offsets, size_offsets, workspace, size_workspace)
604
605 #define PCRE_EXEC(count, re, extra, bptr, len, start_offset, options, \
606 offsets, size_offsets) \
607 if (pcre_mode == PCRE32_MODE) \
608 PCRE_EXEC32(count, re, extra, bptr, len, start_offset, options, \
609 offsets, size_offsets); \
610 else if (pcre_mode == PCRE16_MODE) \
611 PCRE_EXEC16(count, re, extra, bptr, len, start_offset, options, \
612 offsets, size_offsets); \
613 else \
614 PCRE_EXEC8(count, re, extra, bptr, len, start_offset, options, \
615 offsets, size_offsets)
616
617 #define PCRE_FREE_STUDY(extra) \
618 if (pcre_mode == PCRE32_MODE) \
619 PCRE_FREE_STUDY32(extra); \
620 else if (pcre_mode == PCRE16_MODE) \
621 PCRE_FREE_STUDY16(extra); \
622 else \
623 PCRE_FREE_STUDY8(extra)
624
625 #define PCRE_FREE_SUBSTRING(substring) \
626 if (pcre_mode == PCRE32_MODE) \
627 PCRE_FREE_SUBSTRING32(substring); \
628 else if (pcre_mode == PCRE16_MODE) \
629 PCRE_FREE_SUBSTRING16(substring); \
630 else \
631 PCRE_FREE_SUBSTRING8(substring)
632
633 #define PCRE_FREE_SUBSTRING_LIST(listptr) \
634 if (pcre_mode == PCRE32_MODE) \
635 PCRE_FREE_SUBSTRING_LIST32(listptr); \
636 else if (pcre_mode == PCRE16_MODE) \
637 PCRE_FREE_SUBSTRING_LIST16(listptr); \
638 else \
639 PCRE_FREE_SUBSTRING_LIST8(listptr)
640
641 #define PCRE_GET_NAMED_SUBSTRING(rc, re, bptr, offsets, count, \
642 getnamesptr, subsptr) \
643 if (pcre_mode == PCRE32_MODE) \
644 PCRE_GET_NAMED_SUBSTRING32(rc, re, bptr, offsets, count, \
645 getnamesptr, subsptr); \
646 else if (pcre_mode == PCRE16_MODE) \
647 PCRE_GET_NAMED_SUBSTRING16(rc, re, bptr, offsets, count, \
648 getnamesptr, subsptr); \
649 else \
650 PCRE_GET_NAMED_SUBSTRING8(rc, re, bptr, offsets, count, \
651 getnamesptr, subsptr)
652
653 #define PCRE_GET_STRINGNUMBER(n, rc, ptr) \
654 if (pcre_mode == PCRE32_MODE) \
655 PCRE_GET_STRINGNUMBER32(n, rc, ptr); \
656 else if (pcre_mode == PCRE16_MODE) \
657 PCRE_GET_STRINGNUMBER16(n, rc, ptr); \
658 else \
659 PCRE_GET_STRINGNUMBER8(n, rc, ptr)
660
661 #define PCRE_GET_SUBSTRING(rc, bptr, use_offsets, count, i, subsptr) \
662 if (pcre_mode == PCRE32_MODE) \
663 PCRE_GET_SUBSTRING32(rc, bptr, use_offsets, count, i, subsptr); \
664 else if (pcre_mode == PCRE16_MODE) \
665 PCRE_GET_SUBSTRING16(rc, bptr, use_offsets, count, i, subsptr); \
666 else \
667 PCRE_GET_SUBSTRING8(rc, bptr, use_offsets, count, i, subsptr)
668
669 #define PCRE_GET_SUBSTRING_LIST(rc, bptr, offsets, count, listptr) \
670 if (pcre_mode == PCRE32_MODE) \
671 PCRE_GET_SUBSTRING_LIST32(rc, bptr, offsets, count, listptr); \
672 else if (pcre_mode == PCRE16_MODE) \
673 PCRE_GET_SUBSTRING_LIST16(rc, bptr, offsets, count, listptr); \
674 else \
675 PCRE_GET_SUBSTRING_LIST8(rc, bptr, offsets, count, listptr)
676
677 #define PCRE_JIT_STACK_ALLOC(startsize, maxsize) \
678 (pcre_mode == PCRE32_MODE ? \
679 PCRE_JIT_STACK_ALLOC32(startsize, maxsize) \
680 : pcre_mode == PCRE16_MODE ? \
681 PCRE_JIT_STACK_ALLOC16(startsize, maxsize) \
682 : PCRE_JIT_STACK_ALLOC8(startsize, maxsize))
683
684 #define PCRE_JIT_STACK_FREE(stack) \
685 if (pcre_mode == PCRE32_MODE) \
686 PCRE_JIT_STACK_FREE32(stack); \
687 else if (pcre_mode == PCRE16_MODE) \
688 PCRE_JIT_STACK_FREE16(stack); \
689 else \
690 PCRE_JIT_STACK_FREE8(stack)
691
692 #define PCRE_MAKETABLES \
693 (pcre_mode == PCRE32_MODE ? pcre32_maketables() : pcre_mode == PCRE16_MODE ? pcre16_maketables() : pcre_maketables())
694
695 #define PCRE_PATTERN_TO_HOST_BYTE_ORDER(rc, re, extra, tables) \
696 if (pcre_mode == PCRE32_MODE) \
697 PCRE_PATTERN_TO_HOST_BYTE_ORDER32(rc, re, extra, tables); \
698 else if (pcre_mode == PCRE16_MODE) \
699 PCRE_PATTERN_TO_HOST_BYTE_ORDER16(rc, re, extra, tables); \
700 else \
701 PCRE_PATTERN_TO_HOST_BYTE_ORDER8(rc, re, extra, tables)
702
703 #define PCRE_PRINTINT(re, outfile, debug_lengths) \
704 if (pcre_mode == PCRE32_MODE) \
705 PCRE_PRINTINT32(re, outfile, debug_lengths); \
706 else if (pcre_mode == PCRE16_MODE) \
707 PCRE_PRINTINT16(re, outfile, debug_lengths); \
708 else \
709 PCRE_PRINTINT8(re, outfile, debug_lengths)
710
711 #define PCRE_STUDY(extra, re, options, error) \
712 if (pcre_mode == PCRE32_MODE) \
713 PCRE_STUDY32(extra, re, options, error); \
714 else if (pcre_mode == PCRE16_MODE) \
715 PCRE_STUDY16(extra, re, options, error); \
716 else \
717 PCRE_STUDY8(extra, re, options, error)
718
719
720 /* ----- Two out of three modes are supported ----- */
721
722 #else
723
724 /* We can use some macro trickery to make a single set of definitions work in
725 the three different cases. */
726
727 /* ----- 32-bit and 16-bit but not 8-bit supported ----- */
728
729 #if defined(SUPPORT_PCRE32) && defined(SUPPORT_PCRE16)
730 #define BITONE 32
731 #define BITTWO 16
732
733 /* ----- 32-bit and 8-bit but not 16-bit supported ----- */
734
735 #elif defined(SUPPORT_PCRE32) && defined(SUPPORT_PCRE8)
736 #define BITONE 32
737 #define BITTWO 8
738
739 /* ----- 16-bit and 8-bit but not 32-bit supported ----- */
740
741 #else
742 #define BITONE 16
743 #define BITTWO 8
744 #endif
745
746 #define glue(a,b) a##b
747 #define G(a,b) glue(a,b)
748
749
750 /* ----- Common macros for two-mode cases ----- */
751
752 #define PCHARS(lv, p, offset, len, f) \
753 if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
754 G(PCHARS,BITONE)(lv, p, offset, len, f); \
755 else \
756 G(PCHARS,BITTWO)(lv, p, offset, len, f)
757
758 #define PCHARSV(p, offset, len, f) \
759 if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
760 G(PCHARSV,BITONE)(p, offset, len, f); \
761 else \
762 G(PCHARSV,BITTWO)(p, offset, len, f)
763
764 #define READ_CAPTURE_NAME(p, cn8, cn16, cn32, re) \
765 if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
766 G(READ_CAPTURE_NAME,BITONE)(p, cn8, cn16, cn32, re); \
767 else \
768 G(READ_CAPTURE_NAME,BITTWO)(p, cn8, cn16, cn32, re)
769
770 #define SET_PCRE_CALLOUT(callout) \
771 if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
772 G(SET_PCRE_CALLOUT,BITONE)(callout); \
773 else \
774 G(SET_PCRE_CALLOUT,BITTWO)(callout)
775
776 #define SET_PCRE_STACK_GUARD(stack_guard) \
777 if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
778 G(SET_PCRE_STACK_GUARD,BITONE)(stack_guard); \
779 else \
780 G(SET_PCRE_STACK_GUARD,BITTWO)(stack_guard)
781
782 #define STRLEN(p) ((pcre_mode == G(G(PCRE,BITONE),_MODE)) ? \
783 G(STRLEN,BITONE)(p) : G(STRLEN,BITTWO)(p))
784
785 #define PCRE_ASSIGN_JIT_STACK(extra, callback, userdata) \
786 if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
787 G(PCRE_ASSIGN_JIT_STACK,BITONE)(extra, callback, userdata); \
788 else \
789 G(PCRE_ASSIGN_JIT_STACK,BITTWO)(extra, callback, userdata)
790
791 #define PCRE_COMPILE(re, pat, options, error, erroffset, tables) \
792 if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
793 G(PCRE_COMPILE,BITONE)(re, pat, options, error, erroffset, tables); \
794 else \
795 G(PCRE_COMPILE,BITTWO)(re, pat, options, error, erroffset, tables)
796
797 #define PCRE_CONFIG G(G(pcre,BITONE),_config)
798
799 #define PCRE_COPY_NAMED_SUBSTRING(rc, re, bptr, offsets, count, \
800 namesptr, cbuffer, size) \
801 if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
802 G(PCRE_COPY_NAMED_SUBSTRING,BITONE)(rc, re, bptr, offsets, count, \
803 namesptr, cbuffer, size); \
804 else \
805 G(PCRE_COPY_NAMED_SUBSTRING,BITTWO)(rc, re, bptr, offsets, count, \
806 namesptr, cbuffer, size)
807
808 #define PCRE_COPY_SUBSTRING(rc, bptr, offsets, count, i, cbuffer, size) \
809 if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
810 G(PCRE_COPY_SUBSTRING,BITONE)(rc, bptr, offsets, count, i, cbuffer, size); \
811 else \
812 G(PCRE_COPY_SUBSTRING,BITTWO)(rc, bptr, offsets, count, i, cbuffer, size)
813
814 #define PCRE_DFA_EXEC(count, re, extra, bptr, len, start_offset, options, \
815 offsets, size_offsets, workspace, size_workspace) \
816 if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
817 G(PCRE_DFA_EXEC,BITONE)(count, re, extra, bptr, len, start_offset, options, \
818 offsets, size_offsets, workspace, size_workspace); \
819 else \
820 G(PCRE_DFA_EXEC,BITTWO)(count, re, extra, bptr, len, start_offset, options, \
821 offsets, size_offsets, workspace, size_workspace)
822
823 #define PCRE_EXEC(count, re, extra, bptr, len, start_offset, options, \
824 offsets, size_offsets) \
825 if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
826 G(PCRE_EXEC,BITONE)(count, re, extra, bptr, len, start_offset, options, \
827 offsets, size_offsets); \
828 else \
829 G(PCRE_EXEC,BITTWO)(count, re, extra, bptr, len, start_offset, options, \
830 offsets, size_offsets)
831
832 #define PCRE_FREE_STUDY(extra) \
833 if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
834 G(PCRE_FREE_STUDY,BITONE)(extra); \
835 else \
836 G(PCRE_FREE_STUDY,BITTWO)(extra)
837
838 #define PCRE_FREE_SUBSTRING(substring) \
839 if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
840 G(PCRE_FREE_SUBSTRING,BITONE)(substring); \
841 else \
842 G(PCRE_FREE_SUBSTRING,BITTWO)(substring)
843
844 #define PCRE_FREE_SUBSTRING_LIST(listptr) \
845 if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
846 G(PCRE_FREE_SUBSTRING_LIST,BITONE)(listptr); \
847 else \
848 G(PCRE_FREE_SUBSTRING_LIST,BITTWO)(listptr)
849
850 #define PCRE_GET_NAMED_SUBSTRING(rc, re, bptr, offsets, count, \
851 getnamesptr, subsptr) \
852 if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
853 G(PCRE_GET_NAMED_SUBSTRING,BITONE)(rc, re, bptr, offsets, count, \
854 getnamesptr, subsptr); \
855 else \
856 G(PCRE_GET_NAMED_SUBSTRING,BITTWO)(rc, re, bptr, offsets, count, \
857 getnamesptr, subsptr)
858
859 #define PCRE_GET_STRINGNUMBER(n, rc, ptr) \
860 if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
861 G(PCRE_GET_STRINGNUMBER,BITONE)(n, rc, ptr); \
862 else \
863 G(PCRE_GET_STRINGNUMBER,BITTWO)(n, rc, ptr)
864
865 #define PCRE_GET_SUBSTRING(rc, bptr, use_offsets, count, i, subsptr) \
866 if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
867 G(PCRE_GET_SUBSTRING,BITONE)(rc, bptr, use_offsets, count, i, subsptr); \
868 else \
869 G(PCRE_GET_SUBSTRING,BITTWO)(rc, bptr, use_offsets, count, i, subsptr)
870
871 #define PCRE_GET_SUBSTRING_LIST(rc, bptr, offsets, count, listptr) \
872 if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
873 G(PCRE_GET_SUBSTRING_LIST,BITONE)(rc, bptr, offsets, count, listptr); \
874 else \
875 G(PCRE_GET_SUBSTRING_LIST,BITTWO)(rc, bptr, offsets, count, listptr)
876
877 #define PCRE_JIT_STACK_ALLOC(startsize, maxsize) \
878 (pcre_mode == G(G(PCRE,BITONE),_MODE)) ? \
879 G(PCRE_JIT_STACK_ALLOC,BITONE)(startsize, maxsize) \
880 : G(PCRE_JIT_STACK_ALLOC,BITTWO)(startsize, maxsize)
881
882 #define PCRE_JIT_STACK_FREE(stack) \
883 if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
884 G(PCRE_JIT_STACK_FREE,BITONE)(stack); \
885 else \
886 G(PCRE_JIT_STACK_FREE,BITTWO)(stack)
887
888 #define PCRE_MAKETABLES \
889 (pcre_mode == G(G(PCRE,BITONE),_MODE)) ? \
890 G(G(pcre,BITONE),_maketables)() : G(G(pcre,BITTWO),_maketables)()
891
892 #define PCRE_PATTERN_TO_HOST_BYTE_ORDER(rc, re, extra, tables) \
893 if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
894 G(PCRE_PATTERN_TO_HOST_BYTE_ORDER,BITONE)(rc, re, extra, tables); \
895 else \
896 G(PCRE_PATTERN_TO_HOST_BYTE_ORDER,BITTWO)(rc, re, extra, tables)
897
898 #define PCRE_PRINTINT(re, outfile, debug_lengths) \
899 if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
900 G(PCRE_PRINTINT,BITONE)(re, outfile, debug_lengths); \
901 else \
902 G(PCRE_PRINTINT,BITTWO)(re, outfile, debug_lengths)
903
904 #define PCRE_STUDY(extra, re, options, error) \
905 if (pcre_mode == G(G(PCRE,BITONE),_MODE)) \
906 G(PCRE_STUDY,BITONE)(extra, re, options, error); \
907 else \
908 G(PCRE_STUDY,BITTWO)(extra, re, options, error)
909
910 #endif /* Two out of three modes */
911
912 /* ----- End of cases where more than one mode is supported ----- */
913
914
915 /* ----- Only 8-bit mode is supported ----- */
916
917 #elif defined SUPPORT_PCRE8
918 #define CHAR_SIZE 1
919 #define PCHARS PCHARS8
920 #define PCHARSV PCHARSV8
921 #define READ_CAPTURE_NAME READ_CAPTURE_NAME8
922 #define SET_PCRE_CALLOUT SET_PCRE_CALLOUT8
923 #define SET_PCRE_STACK_GUARD SET_PCRE_STACK_GUARD8
924 #define STRLEN STRLEN8
925 #define PCRE_ASSIGN_JIT_STACK PCRE_ASSIGN_JIT_STACK8
926 #define PCRE_COMPILE PCRE_COMPILE8
927 #define PCRE_CONFIG pcre_config
928 #define PCRE_COPY_NAMED_SUBSTRING PCRE_COPY_NAMED_SUBSTRING8
929 #define PCRE_COPY_SUBSTRING PCRE_COPY_SUBSTRING8
930 #define PCRE_DFA_EXEC PCRE_DFA_EXEC8
931 #define PCRE_EXEC PCRE_EXEC8
932 #define PCRE_FREE_STUDY PCRE_FREE_STUDY8
933 #define PCRE_FREE_SUBSTRING PCRE_FREE_SUBSTRING8
934 #define PCRE_FREE_SUBSTRING_LIST PCRE_FREE_SUBSTRING_LIST8
935 #define PCRE_GET_NAMED_SUBSTRING PCRE_GET_NAMED_SUBSTRING8
936 #define PCRE_GET_STRINGNUMBER PCRE_GET_STRINGNUMBER8
937 #define PCRE_GET_SUBSTRING PCRE_GET_SUBSTRING8
938 #define PCRE_GET_SUBSTRING_LIST PCRE_GET_SUBSTRING_LIST8
939 #define PCRE_JIT_STACK_ALLOC PCRE_JIT_STACK_ALLOC8
940 #define PCRE_JIT_STACK_FREE PCRE_JIT_STACK_FREE8
941 #define PCRE_MAKETABLES pcre_maketables()
942 #define PCRE_PATTERN_TO_HOST_BYTE_ORDER PCRE_PATTERN_TO_HOST_BYTE_ORDER8
943 #define PCRE_PRINTINT PCRE_PRINTINT8
944 #define PCRE_STUDY PCRE_STUDY8
945
946 /* ----- Only 16-bit mode is supported ----- */
947
948 #elif defined SUPPORT_PCRE16
949 #define CHAR_SIZE 2
950 #define PCHARS PCHARS16
951 #define PCHARSV PCHARSV16
952 #define READ_CAPTURE_NAME READ_CAPTURE_NAME16
953 #define SET_PCRE_CALLOUT SET_PCRE_CALLOUT16
954 #define SET_PCRE_STACK_GUARD SET_PCRE_STACK_GUARD16
955 #define STRLEN STRLEN16
956 #define PCRE_ASSIGN_JIT_STACK PCRE_ASSIGN_JIT_STACK16
957 #define PCRE_COMPILE PCRE_COMPILE16
958 #define PCRE_CONFIG pcre16_config
959 #define PCRE_COPY_NAMED_SUBSTRING PCRE_COPY_NAMED_SUBSTRING16
960 #define PCRE_COPY_SUBSTRING PCRE_COPY_SUBSTRING16
961 #define PCRE_DFA_EXEC PCRE_DFA_EXEC16
962 #define PCRE_EXEC PCRE_EXEC16
963 #define PCRE_FREE_STUDY PCRE_FREE_STUDY16
964 #define PCRE_FREE_SUBSTRING PCRE_FREE_SUBSTRING16
965 #define PCRE_FREE_SUBSTRING_LIST PCRE_FREE_SUBSTRING_LIST16
966 #define PCRE_GET_NAMED_SUBSTRING PCRE_GET_NAMED_SUBSTRING16
967 #define PCRE_GET_STRINGNUMBER PCRE_GET_STRINGNUMBER16
968 #define PCRE_GET_SUBSTRING PCRE_GET_SUBSTRING16
969 #define PCRE_GET_SUBSTRING_LIST PCRE_GET_SUBSTRING_LIST16
970 #define PCRE_JIT_STACK_ALLOC PCRE_JIT_STACK_ALLOC16
971 #define PCRE_JIT_STACK_FREE PCRE_JIT_STACK_FREE16
972 #define PCRE_MAKETABLES pcre16_maketables()
973 #define PCRE_PATTERN_TO_HOST_BYTE_ORDER PCRE_PATTERN_TO_HOST_BYTE_ORDER16
974 #define PCRE_PRINTINT PCRE_PRINTINT16
975 #define PCRE_STUDY PCRE_STUDY16
976
977 /* ----- Only 32-bit mode is supported ----- */
978
979 #elif defined SUPPORT_PCRE32
980 #define CHAR_SIZE 4
981 #define PCHARS PCHARS32
982 #define PCHARSV PCHARSV32
983 #define READ_CAPTURE_NAME READ_CAPTURE_NAME32
984 #define SET_PCRE_CALLOUT SET_PCRE_CALLOUT32
985 #define SET_PCRE_STACK_GUARD SET_PCRE_STACK_GUARD32
986 #define STRLEN STRLEN32
987 #define PCRE_ASSIGN_JIT_STACK PCRE_ASSIGN_JIT_STACK32
988 #define PCRE_COMPILE PCRE_COMPILE32
989 #define PCRE_CONFIG pcre32_config
990 #define PCRE_COPY_NAMED_SUBSTRING PCRE_COPY_NAMED_SUBSTRING32
991 #define PCRE_COPY_SUBSTRING PCRE_COPY_SUBSTRING32
992 #define PCRE_DFA_EXEC PCRE_DFA_EXEC32
993 #define PCRE_EXEC PCRE_EXEC32
994 #define PCRE_FREE_STUDY PCRE_FREE_STUDY32
995 #define PCRE_FREE_SUBSTRING PCRE_FREE_SUBSTRING32
996 #define PCRE_FREE_SUBSTRING_LIST PCRE_FREE_SUBSTRING_LIST32
997 #define PCRE_GET_NAMED_SUBSTRING PCRE_GET_NAMED_SUBSTRING32
998 #define PCRE_GET_STRINGNUMBER PCRE_GET_STRINGNUMBER32
999 #define PCRE_GET_SUBSTRING PCRE_GET_SUBSTRING32
1000 #define PCRE_GET_SUBSTRING_LIST PCRE_GET_SUBSTRING_LIST32
1001 #define PCRE_JIT_STACK_ALLOC PCRE_JIT_STACK_ALLOC32
1002 #define PCRE_JIT_STACK_FREE PCRE_JIT_STACK_FREE32
1003 #define PCRE_MAKETABLES pcre32_maketables()
1004 #define PCRE_PATTERN_TO_HOST_BYTE_ORDER PCRE_PATTERN_TO_HOST_BYTE_ORDER32
1005 #define PCRE_PRINTINT PCRE_PRINTINT32
1006 #define PCRE_STUDY PCRE_STUDY32
1007
1008 #endif
1009
1010 /* ----- End of mode-specific function call macros ----- */
1011
1012
1013 /* Other parameters */
1014
1015 #ifndef CLOCKS_PER_SEC
1016 #ifdef CLK_TCK
1017 #define CLOCKS_PER_SEC CLK_TCK
1018 #else
1019 #define CLOCKS_PER_SEC 100
1020 #endif
1021 #endif
1022
1023 #if !defined NODFA
1024 #define DFA_WS_DIMENSION 1000
1025 #endif
1026
1027 /* This is the default loop count for timing. */
1028
1029 #define LOOPREPEAT 500000
1030
1031 /* Static variables */
1032
1033 static FILE *outfile;
1034 static int log_store = 0;
1035 static int callout_count;
1036 static int callout_extra;
1037 static int callout_fail_count;
1038 static int callout_fail_id;
1039 static int debug_lengths;
1040 static int first_callout;
1041 static int jit_was_used;
1042 static int locale_set = 0;
1043 static int show_malloc;
1044 static int stack_guard_return;
1045 static int use_utf;
1046 static const unsigned char *last_callout_mark = NULL;
1047
1048 /* The buffers grow automatically if very long input lines are encountered. */
1049
1050 static int buffer_size = 50000;
1051 static pcre_uint8 *buffer = NULL;
1052 static pcre_uint8 *pbuffer = NULL;
1053
1054 /* Just as a safety check, make sure that COMPILE_PCRE[16|32] are *not* set. */
1055
1056 #ifdef COMPILE_PCRE16
1057 #error COMPILE_PCRE16 must not be set when compiling pcretest.c
1058 #endif
1059
1060 #ifdef COMPILE_PCRE32
1061 #error COMPILE_PCRE32 must not be set when compiling pcretest.c
1062 #endif
1063
1064 /* We need buffers for building 16/32-bit strings, and the tables of operator
1065 lengths that are used for 16/32-bit compiling, in order to swap bytes in a
1066 pattern for saving/reloading testing. Luckily, the data for these tables is
1067 defined as a macro. However, we must ensure that LINK_SIZE and IMM2_SIZE (which
1068 are used in the tables) are adjusted appropriately for the 16/32-bit world.
1069 LINK_SIZE is also used later in this program. */
1070
1071 #ifdef SUPPORT_PCRE16
1072 #undef IMM2_SIZE
1073 #define IMM2_SIZE 1
1074
1075 #if LINK_SIZE == 2
1076 #undef LINK_SIZE
1077 #define LINK_SIZE 1
1078 #elif LINK_SIZE == 3 || LINK_SIZE == 4
1079 #undef LINK_SIZE
1080 #define LINK_SIZE 2
1081 #else
1082 #error LINK_SIZE must be either 2, 3, or 4
1083 #endif
1084
1085 static int buffer16_size = 0;
1086 static pcre_uint16 *buffer16 = NULL;
1087 static const pcre_uint16 OP_lengths16[] = { OP_LENGTHS };
1088 #endif /* SUPPORT_PCRE16 */
1089
1090 #ifdef SUPPORT_PCRE32
1091 #undef IMM2_SIZE
1092 #define IMM2_SIZE 1
1093 #undef LINK_SIZE
1094 #define LINK_SIZE 1
1095
1096 static int buffer32_size = 0;
1097 static pcre_uint32 *buffer32 = NULL;
1098 static const pcre_uint32 OP_lengths32[] = { OP_LENGTHS };
1099 #endif /* SUPPORT_PCRE32 */
1100
1101 /* If we have 8-bit support, default to it; if there is also 16-or 32-bit
1102 support, it can be changed by an option. If there is no 8-bit support, there
1103 must be 16-or 32-bit support, so default it to 1. */
1104
1105 #if defined SUPPORT_PCRE8
1106 static int pcre_mode = PCRE8_MODE;
1107 #elif defined SUPPORT_PCRE16
1108 static int pcre_mode = PCRE16_MODE;
1109 #elif defined SUPPORT_PCRE32
1110 static int pcre_mode = PCRE32_MODE;
1111 #endif
1112
1113 /* JIT study options for -s+n and /S+n where '1' <= n <= '7'. */
1114
1115 static int jit_study_bits[] =
1116 {
1117 PCRE_STUDY_JIT_COMPILE,
1118 PCRE_STUDY_JIT_PARTIAL_SOFT_COMPILE,
1119 PCRE_STUDY_JIT_COMPILE + PCRE_STUDY_JIT_PARTIAL_SOFT_COMPILE,
1120 PCRE_STUDY_JIT_PARTIAL_HARD_COMPILE,
1121 PCRE_STUDY_JIT_COMPILE + PCRE_STUDY_JIT_PARTIAL_HARD_COMPILE,
1122 PCRE_STUDY_JIT_PARTIAL_SOFT_COMPILE + PCRE_STUDY_JIT_PARTIAL_HARD_COMPILE,
1123 PCRE_STUDY_JIT_COMPILE + PCRE_STUDY_JIT_PARTIAL_SOFT_COMPILE +
1124 PCRE_STUDY_JIT_PARTIAL_HARD_COMPILE
1125 };
1126
1127 #define PCRE_STUDY_ALLJIT (PCRE_STUDY_JIT_COMPILE | \
1128 PCRE_STUDY_JIT_PARTIAL_SOFT_COMPILE | PCRE_STUDY_JIT_PARTIAL_HARD_COMPILE)
1129
1130 /* Textual explanations for runtime error codes */
1131
1132 static const char *errtexts[] = {
1133 NULL, /* 0 is no error */
1134 NULL, /* NOMATCH is handled specially */
1135 "NULL argument passed",
1136 "bad option value",
1137 "magic number missing",
1138 "unknown opcode - pattern overwritten?",
1139 "no more memory",
1140 NULL, /* never returned by pcre_exec() or pcre_dfa_exec() */
1141 "match limit exceeded",
1142 "callout error code",
1143 NULL, /* BADUTF8/16 is handled specially */
1144 NULL, /* BADUTF8/16 offset is handled specially */
1145 NULL, /* PARTIAL is handled specially */
1146 "not used - internal error",
1147 "internal error - pattern overwritten?",
1148 "bad count value",
1149 "item unsupported for DFA matching",
1150 "backreference condition or recursion test not supported for DFA matching",
1151 "match limit not supported for DFA matching",
1152 "workspace size exceeded in DFA matching",
1153 "too much recursion for DFA matching",
1154 "recursion limit exceeded",
1155 "not used - internal error",
1156 "invalid combination of newline options",
1157 "bad offset value",
1158 NULL, /* SHORTUTF8/16 is handled specially */
1159 "nested recursion at the same subject position",
1160 "JIT stack limit reached",
1161 "pattern compiled in wrong mode: 8-bit/16-bit error",
1162 "pattern compiled with other endianness",
1163 "invalid data in workspace for DFA restart",
1164 "bad JIT option",
1165 "bad length"
1166 };
1167
1168
1169 /*************************************************
1170 * Alternate character tables *
1171 *************************************************/
1172
1173 /* By default, the "tables" pointer when calling PCRE is set to NULL, thereby
1174 using the default tables of the library. However, the T option can be used to
1175 select alternate sets of tables, for different kinds of testing. Note also that
1176 the L (locale) option also adjusts the tables. */
1177
1178 /* This is the set of tables distributed as default with PCRE. It recognizes
1179 only ASCII characters. */
1180
1181 static const pcre_uint8 tables0[] = {
1182
1183 /* This table is a lower casing table. */
1184
1185 0, 1, 2, 3, 4, 5, 6, 7,
1186 8, 9, 10, 11, 12, 13, 14, 15,
1187 16, 17, 18, 19, 20, 21, 22, 23,
1188 24, 25, 26, 27, 28, 29, 30, 31,
1189 32, 33, 34, 35, 36, 37, 38, 39,
1190 40, 41, 42, 43, 44, 45, 46, 47,
1191 48, 49, 50, 51, 52, 53, 54, 55,
1192 56, 57, 58, 59, 60, 61, 62, 63,
1193 64, 97, 98, 99,100,101,102,103,
1194 104,105,106,107,108,109,110,111,
1195 112,113,114,115,116,117,118,119,
1196 120,121,122, 91, 92, 93, 94, 95,
1197 96, 97, 98, 99,100,101,102,103,
1198 104,105,106,107,108,109,110,111,
1199 112,113,114,115,116,117,118,119,
1200 120,121,122,123,124,125,126,127,
1201 128,129,130,131,132,133,134,135,
1202 136,137,138,139,140,141,142,143,
1203 144,145,146,147,148,149,150,151,
1204 152,153,154,155,156,157,158,159,
1205 160,161,162,163,164,165,166,167,
1206 168,169,170,171,172,173,174,175,
1207 176,177,178,179,180,181,182,183,
1208 184,185,186,187,188,189,190,191,
1209 192,193,194,195,196,197,198,199,
1210 200,201,202,203,204,205,206,207,
1211 208,209,210,211,212,213,214,215,
1212 216,217,218,219,220,221,222,223,
1213 224,225,226,227,228,229,230,231,
1214 232,233,234,235,236,237,238,239,
1215 240,241,242,243,244,245,246,247,
1216 248,249,250,251,252,253,254,255,
1217
1218 /* This table is a case flipping table. */
1219
1220 0, 1, 2, 3, 4, 5, 6, 7,
1221 8, 9, 10, 11, 12, 13, 14, 15,
1222 16, 17, 18, 19, 20, 21, 22, 23,
1223 24, 25, 26, 27, 28, 29, 30, 31,
1224 32, 33, 34, 35, 36, 37, 38, 39,
1225 40, 41, 42, 43, 44, 45, 46, 47,
1226 48, 49, 50, 51, 52, 53, 54, 55,
1227 56, 57, 58, 59, 60, 61, 62, 63,
1228 64, 97, 98, 99,100,101,102,103,
1229 104,105,106,107,108,109,110,111,
1230 112,113,114,115,116,117,118,119,
1231 120,121,122, 91, 92, 93, 94, 95,
1232 96, 65, 66, 67, 68, 69, 70, 71,
1233 72, 73, 74, 75, 76, 77, 78, 79,
1234 80, 81, 82, 83, 84, 85, 86, 87,
1235 88, 89, 90,123,124,125,126,127,
1236 128,129,130,131,132,133,134,135,
1237 136,137,138,139,140,141,142,143,
1238 144,145,146,147,148,149,150,151,
1239 152,153,154,155,156,157,158,159,
1240 160,161,162,163,164,165,166,167,
1241 168,169,170,171,172,173,174,175,
1242 176,177,178,179,180,181,182,183,
1243 184,185,186,187,188,189,190,191,
1244 192,193,194,195,196,197,198,199,
1245 200,201,202,203,204,205,206,207,
1246 208,209,210,211,212,213,214,215,
1247 216,217,218,219,220,221,222,223,
1248 224,225,226,227,228,229,230,231,
1249 232,233,234,235,236,237,238,239,
1250 240,241,242,243,244,245,246,247,
1251 248,249,250,251,252,253,254,255,
1252
1253 /* This table contains bit maps for various character classes. Each map is 32
1254 bytes long and the bits run from the least significant end of each byte. The
1255 classes that have their own maps are: space, xdigit, digit, upper, lower, word,
1256 graph, print, punct, and cntrl. Other classes are built from combinations. */
1257
1258 0x00,0x3e,0x00,0x00,0x01,0x00,0x00,0x00,
1259 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1260 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1261 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1262
1263 0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03,
1264 0x7e,0x00,0x00,0x00,0x7e,0x00,0x00,0x00,
1265 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1266 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1267
1268 0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03,
1269 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1270 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1271 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1272
1273 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1274 0xfe,0xff,0xff,0x07,0x00,0x00,0x00,0x00,
1275 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1276 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1277
1278 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1279 0x00,0x00,0x00,0x00,0xfe,0xff,0xff,0x07,
1280 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1281 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1282
1283 0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03,
1284 0xfe,0xff,0xff,0x87,0xfe,0xff,0xff,0x07,
1285 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1286 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1287
1288 0x00,0x00,0x00,0x00,0xfe,0xff,0xff,0xff,
1289 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f,
1290 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1291 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1292
1293 0x00,0x00,0x00,0x00,0xff,0xff,0xff,0xff,
1294 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f,
1295 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1296 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1297
1298 0x00,0x00,0x00,0x00,0xfe,0xff,0x00,0xfc,
1299 0x01,0x00,0x00,0xf8,0x01,0x00,0x00,0x78,
1300 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1301 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1302
1303 0xff,0xff,0xff,0xff,0x00,0x00,0x00,0x00,
1304 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,
1305 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1306 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
1307
1308 /* This table identifies various classes of character by individual bits:
1309 0x01 white space character
1310 0x02 letter
1311 0x04 decimal digit
1312 0x08 hexadecimal digit
1313 0x10 alphanumeric or '_'
1314 0x80 regular expression metacharacter or binary zero
1315 */
1316
1317 0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 0- 7 */
1318 0x00,0x01,0x01,0x01,0x01,0x01,0x00,0x00, /* 8- 15 */
1319 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 16- 23 */
1320 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 24- 31 */
1321 0x01,0x00,0x00,0x00,0x80,0x00,0x00,0x00, /* - ' */
1322 0x80,0x80,0x80,0x80,0x00,0x00,0x80,0x00, /* ( - / */
1323 0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c, /* 0 - 7 */
1324 0x1c,0x1c,0x00,0x00,0x00,0x00,0x00,0x80, /* 8 - ? */
1325 0x00,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /* @ - G */
1326 0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /* H - O */
1327 0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /* P - W */
1328 0x12,0x12,0x12,0x80,0x80,0x00,0x80,0x10, /* X - _ */
1329 0x00,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /* ` - g */
1330 0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /* h - o */
1331 0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /* p - w */
1332 0x12,0x12,0x12,0x80,0x80,0x00,0x00,0x00, /* x -127 */
1333 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 128-135 */
1334 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 136-143 */
1335 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 144-151 */
1336 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 152-159 */
1337 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 160-167 */
1338 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 168-175 */
1339 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 176-183 */
1340 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 184-191 */
1341 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 192-199 */
1342 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 200-207 */
1343 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 208-215 */
1344 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 216-223 */
1345 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 224-231 */
1346 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 232-239 */
1347 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 240-247 */
1348 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};/* 248-255 */
1349
1350 /* This is a set of tables that came originally from a Windows user. It seems
1351 to be at least an approximation of ISO 8859. In particular, there are
1352 characters greater than 128 that are marked as spaces, letters, etc. */
1353
1354 static const pcre_uint8 tables1[] = {
1355 0,1,2,3,4,5,6,7,
1356 8,9,10,11,12,13,14,15,
1357 16,17,18,19,20,21,22,23,
1358 24,25,26,27,28,29,30,31,
1359 32,33,34,35,36,37,38,39,
1360 40,41,42,43,44,45,46,47,
1361 48,49,50,51,52,53,54,55,
1362 56,57,58,59,60,61,62,63,
1363 64,97,98,99,100,101,102,103,
1364 104,105,106,107,108,109,110,111,
1365 112,113,114,115,116,117,118,119,
1366 120,121,122,91,92,93,94,95,
1367 96,97,98,99,100,101,102,103,
1368 104,105,106,107,108,109,110,111,
1369 112,113,114,115,116,117,118,119,
1370 120,121,122,123,124,125,126,127,
1371 128,129,130,131,132,133,134,135,
1372 136,137,138,139,140,141,142,143,
1373 144,145,146,147,148,149,150,151,
1374 152,153,154,155,156,157,158,159,
1375 160,161,162,163,164,165,166,167,
1376 168,169,170,171,172,173,174,175,
1377 176,177,178,179,180,181,182,183,
1378 184,185,186,187,188,189,190,191,
1379 224,225,226,227,228,229,230,231,
1380 232,233,234,235,236,237,238,239,
1381 240,241,242,243,244,245,246,215,
1382 248,249,250,251,252,253,254,223,
1383 224,225,226,227,228,229,230,231,
1384 232,233,234,235,236,237,238,239,
1385 240,241,242,243,244,245,246,247,
1386 248,249,250,251,252,253,254,255,
1387 0,1,2,3,4,5,6,7,
1388 8,9,10,11,12,13,14,15,
1389 16,17,18,19,20,21,22,23,
1390 24,25,26,27,28,29,30,31,
1391 32,33,34,35,36,37,38,39,
1392 40,41,42,43,44,45,46,47,
1393 48,49,50,51,52,53,54,55,
1394 56,57,58,59,60,61,62,63,
1395 64,97,98,99,100,101,102,103,
1396 104,105,106,107,108,109,110,111,
1397 112,113,114,115,116,117,118,119,
1398 120,121,122,91,92,93,94,95,
1399 96,65,66,67,68,69,70,71,
1400 72,73,74,75,76,77,78,79,
1401 80,81,82,83,84,85,86,87,
1402 88,89,90,123,124,125,126,127,
1403 128,129,130,131,132,133,134,135,
1404 136,137,138,139,140,141,142,143,
1405 144,145,146,147,148,149,150,151,
1406 152,153,154,155,156,157,158,159,
1407 160,161,162,163,164,165,166,167,
1408 168,169,170,171,172,173,174,175,
1409 176,177,178,179,180,181,182,183,
1410 184,185,186,187,188,189,190,191,
1411 224,225,226,227,228,229,230,231,
1412 232,233,234,235,236,237,238,239,
1413 240,241,242,243,244,245,246,215,
1414 248,249,250,251,252,253,254,223,
1415 192,193,194,195,196,197,198,199,
1416 200,201,202,203,204,205,206,207,
1417 208,209,210,211,212,213,214,247,
1418 216,217,218,219,220,221,222,255,
1419 0,62,0,0,1,0,0,0,
1420 0,0,0,0,0,0,0,0,
1421 32,0,0,0,1,0,0,0,
1422 0,0,0,0,0,0,0,0,
1423 0,0,0,0,0,0,255,3,
1424 126,0,0,0,126,0,0,0,
1425 0,0,0,0,0,0,0,0,
1426 0,0,0,0,0,0,0,0,
1427 0,0,0,0,0,0,255,3,
1428 0,0,0,0,0,0,0,0,
1429 0,0,0,0,0,0,12,2,
1430 0,0,0,0,0,0,0,0,
1431 0,0,0,0,0,0,0,0,
1432 254,255,255,7,0,0,0,0,
1433 0,0,0,0,0,0,0,0,
1434 255,255,127,127,0,0,0,0,
1435 0,0,0,0,0,0,0,0,
1436 0,0,0,0,254,255,255,7,
1437 0,0,0,0,0,4,32,4,
1438 0,0,0,128,255,255,127,255,
1439 0,0,0,0,0,0,255,3,
1440 254,255,255,135,254,255,255,7,
1441 0,0,0,0,0,4,44,6,
1442 255,255,127,255,255,255,127,255,
1443 0,0,0,0,254,255,255,255,
1444 255,255,255,255,255,255,255,127,
1445 0,0,0,0,254,255,255,255,
1446 255,255,255,255,255,255,255,255,
1447 0,2,0,0,255,255,255,255,
1448 255,255,255,255,255,255,255,127,
1449 0,0,0,0,255,255,255,255,
1450 255,255,255,255,255,255,255,255,
1451 0,0,0,0,254,255,0,252,
1452 1,0,0,248,1,0,0,120,
1453 0,0,0,0,254,255,255,255,
1454 0,0,128,0,0,0,128,0,
1455 255,255,255,255,0,0,0,0,
1456 0,0,0,0,0,0,0,128,
1457 255,255,255,255,0,0,0,0,
1458 0,0,0,0,0,0,0,0,
1459 128,0,0,0,0,0,0,0,
1460 0,1,1,0,1,1,0,0,
1461 0,0,0,0,0,0,0,0,
1462 0,0,0,0,0,0,0,0,
1463 1,0,0,0,128,0,0,0,
1464 128,128,128,128,0,0,128,0,
1465 28,28,28,28,28,28,28,28,
1466 28,28,0,0,0,0,0,128,
1467 0,26,26,26,26,26,26,18,
1468 18,18,18,18,18,18,18,18,
1469 18,18,18,18,18,18,18,18,
1470 18,18,18,128,128,0,128,16,
1471 0,26,26,26,26,26,26,18,
1472 18,18,18,18,18,18,18,18,
1473 18,18,18,18,18,18,18,18,
1474 18,18,18,128,128,0,0,0,
1475 0,0,0,0,0,1,0,0,
1476 0,0,0,0,0,0,0,0,
1477 0,0,0,0,0,0,0,0,
1478 0,0,0,0,0,0,0,0,
1479 1,0,0,0,0,0,0,0,
1480 0,0,18,0,0,0,0,0,
1481 0,0,20,20,0,18,0,0,
1482 0,20,18,0,0,0,0,0,
1483 18,18,18,18,18,18,18,18,
1484 18,18,18,18,18,18,18,18,
1485 18,18,18,18,18,18,18,0,
1486 18,18,18,18,18,18,18,18,
1487 18,18,18,18,18,18,18,18,
1488 18,18,18,18,18,18,18,18,
1489 18,18,18,18,18,18,18,0,
1490 18,18,18,18,18,18,18,18
1491 };
1492
1493
1494
1495
1496 #ifndef HAVE_STRERROR
1497 /*************************************************
1498 * Provide strerror() for non-ANSI libraries *
1499 *************************************************/
1500
1501 /* Some old-fashioned systems still around (e.g. SunOS4) don't have strerror()
1502 in their libraries, but can provide the same facility by this simple
1503 alternative function. */
1504
1505 extern int sys_nerr;
1506 extern char *sys_errlist[];
1507
1508 char *
strerror(int n)1509 strerror(int n)
1510 {
1511 if (n < 0 || n >= sys_nerr) return "unknown error number";
1512 return sys_errlist[n];
1513 }
1514 #endif /* HAVE_STRERROR */
1515
1516
1517
1518 /*************************************************
1519 * Print newline configuration *
1520 *************************************************/
1521
1522 /*
1523 Arguments:
1524 rc the return code from PCRE_CONFIG_NEWLINE
1525 isc TRUE if called from "-C newline"
1526 Returns: nothing
1527 */
1528
1529 static void
print_newline_config(int rc,BOOL isc)1530 print_newline_config(int rc, BOOL isc)
1531 {
1532 const char *s = NULL;
1533 if (!isc) printf(" Newline sequence is ");
1534 switch(rc)
1535 {
1536 case CHAR_CR: s = "CR"; break;
1537 case CHAR_LF: s = "LF"; break;
1538 case (CHAR_CR<<8 | CHAR_LF): s = "CRLF"; break;
1539 case -1: s = "ANY"; break;
1540 case -2: s = "ANYCRLF"; break;
1541
1542 default:
1543 printf("a non-standard value: 0x%04x\n", rc);
1544 return;
1545 }
1546
1547 printf("%s\n", s);
1548 }
1549
1550
1551
1552 /*************************************************
1553 * JIT memory callback *
1554 *************************************************/
1555
jit_callback(void * arg)1556 static pcre_jit_stack* jit_callback(void *arg)
1557 {
1558 jit_was_used = TRUE;
1559 return (pcre_jit_stack *)arg;
1560 }
1561
1562
1563 #if !defined NOUTF || defined SUPPORT_PCRE16 || defined SUPPORT_PCRE32
1564 /*************************************************
1565 * Convert UTF-8 string to value *
1566 *************************************************/
1567
1568 /* This function takes one or more bytes that represents a UTF-8 character,
1569 and returns the value of the character.
1570
1571 Argument:
1572 utf8bytes a pointer to the byte vector
1573 vptr a pointer to an int to receive the value
1574
1575 Returns: > 0 => the number of bytes consumed
1576 -6 to 0 => malformed UTF-8 character at offset = (-return)
1577 */
1578
1579 static int
utf82ord(pcre_uint8 * utf8bytes,pcre_uint32 * vptr)1580 utf82ord(pcre_uint8 *utf8bytes, pcre_uint32 *vptr)
1581 {
1582 pcre_uint32 c = *utf8bytes++;
1583 pcre_uint32 d = c;
1584 int i, j, s;
1585
1586 for (i = -1; i < 6; i++) /* i is number of additional bytes */
1587 {
1588 if ((d & 0x80) == 0) break;
1589 d <<= 1;
1590 }
1591
1592 if (i == -1) { *vptr = c; return 1; } /* ascii character */
1593 if (i == 0 || i == 6) return 0; /* invalid UTF-8 */
1594
1595 /* i now has a value in the range 1-5 */
1596
1597 s = 6*i;
1598 d = (c & utf8_table3[i]) << s;
1599
1600 for (j = 0; j < i; j++)
1601 {
1602 c = *utf8bytes++;
1603 if ((c & 0xc0) != 0x80) return -(j+1);
1604 s -= 6;
1605 d |= (c & 0x3f) << s;
1606 }
1607
1608 /* Check that encoding was the correct unique one */
1609
1610 for (j = 0; j < utf8_table1_size; j++)
1611 if (d <= (pcre_uint32)utf8_table1[j]) break;
1612 if (j != i) return -(i+1);
1613
1614 /* Valid value */
1615
1616 *vptr = d;
1617 return i+1;
1618 }
1619 #endif /* NOUTF || SUPPORT_PCRE16 */
1620
1621
1622
1623 #if defined SUPPORT_PCRE8 && !defined NOUTF
1624 /*************************************************
1625 * Convert character value to UTF-8 *
1626 *************************************************/
1627
1628 /* This function takes an integer value in the range 0 - 0x7fffffff
1629 and encodes it as a UTF-8 character in 0 to 6 bytes.
1630
1631 Arguments:
1632 cvalue the character value
1633 utf8bytes pointer to buffer for result - at least 6 bytes long
1634
1635 Returns: number of characters placed in the buffer
1636 */
1637
1638 static int
ord2utf8(pcre_uint32 cvalue,pcre_uint8 * utf8bytes)1639 ord2utf8(pcre_uint32 cvalue, pcre_uint8 *utf8bytes)
1640 {
1641 register int i, j;
1642 if (cvalue > 0x7fffffffu)
1643 return -1;
1644 for (i = 0; i < utf8_table1_size; i++)
1645 if (cvalue <= (pcre_uint32)utf8_table1[i]) break;
1646 utf8bytes += i;
1647 for (j = i; j > 0; j--)
1648 {
1649 *utf8bytes-- = 0x80 | (cvalue & 0x3f);
1650 cvalue >>= 6;
1651 }
1652 *utf8bytes = utf8_table2[i] | cvalue;
1653 return i + 1;
1654 }
1655 #endif
1656
1657
1658 #ifdef SUPPORT_PCRE16
1659 /*************************************************
1660 * Convert a string to 16-bit *
1661 *************************************************/
1662
1663 /* In non-UTF mode, the space needed for a 16-bit string is exactly double the
1664 8-bit size. For a UTF-8 string, the size needed for UTF-16 is no more than
1665 double, because up to 0xffff uses no more than 3 bytes in UTF-8 but possibly 4
1666 in UTF-16. Higher values use 4 bytes in UTF-8 and up to 4 bytes in UTF-16. The
1667 result is always left in buffer16.
1668
1669 Note that this function does not object to surrogate values. This is
1670 deliberate; it makes it possible to construct UTF-16 strings that are invalid,
1671 for the purpose of testing that they are correctly faulted.
1672
1673 Patterns to be converted are either plain ASCII or UTF-8; data lines are always
1674 in UTF-8 so that values greater than 255 can be handled.
1675
1676 Arguments:
1677 data TRUE if converting a data line; FALSE for a regex
1678 p points to a byte string
1679 utf true if UTF-8 (to be converted to UTF-16)
1680 len number of bytes in the string (excluding trailing zero)
1681
1682 Returns: number of 16-bit data items used (excluding trailing zero)
1683 OR -1 if a UTF-8 string is malformed
1684 OR -2 if a value > 0x10ffff is encountered
1685 OR -3 if a value > 0xffff is encountered when not in UTF mode
1686 */
1687
1688 static int
to16(int data,pcre_uint8 * p,int utf,int len)1689 to16(int data, pcre_uint8 *p, int utf, int len)
1690 {
1691 pcre_uint16 *pp;
1692
1693 if (buffer16_size < 2*len + 2)
1694 {
1695 if (buffer16 != NULL) free(buffer16);
1696 buffer16_size = 2*len + 2;
1697 buffer16 = (pcre_uint16 *)malloc(buffer16_size);
1698 if (buffer16 == NULL)
1699 {
1700 fprintf(stderr, "pcretest: malloc(%d) failed for buffer16\n", buffer16_size);
1701 exit(1);
1702 }
1703 }
1704
1705 pp = buffer16;
1706
1707 if (!utf && !data)
1708 {
1709 while (len-- > 0) *pp++ = *p++;
1710 }
1711
1712 else
1713 {
1714 pcre_uint32 c = 0;
1715 while (len > 0)
1716 {
1717 int chlen = utf82ord(p, &c);
1718 if (chlen <= 0) return -1;
1719 if (c > 0x10ffff) return -2;
1720 p += chlen;
1721 len -= chlen;
1722 if (c < 0x10000) *pp++ = c; else
1723 {
1724 if (!utf) return -3;
1725 c -= 0x10000;
1726 *pp++ = 0xD800 | (c >> 10);
1727 *pp++ = 0xDC00 | (c & 0x3ff);
1728 }
1729 }
1730 }
1731
1732 *pp = 0;
1733 return pp - buffer16;
1734 }
1735 #endif
1736
1737 #ifdef SUPPORT_PCRE32
1738 /*************************************************
1739 * Convert a string to 32-bit *
1740 *************************************************/
1741
1742 /* In non-UTF mode, the space needed for a 32-bit string is exactly four times the
1743 8-bit size. For a UTF-8 string, the size needed for UTF-32 is no more than four
1744 times, because up to 0xffff uses no more than 3 bytes in UTF-8 but possibly 4
1745 in UTF-32. Higher values use 4 bytes in UTF-8 and up to 4 bytes in UTF-32. The
1746 result is always left in buffer32.
1747
1748 Note that this function does not object to surrogate values. This is
1749 deliberate; it makes it possible to construct UTF-32 strings that are invalid,
1750 for the purpose of testing that they are correctly faulted.
1751
1752 Patterns to be converted are either plain ASCII or UTF-8; data lines are always
1753 in UTF-8 so that values greater than 255 can be handled.
1754
1755 Arguments:
1756 data TRUE if converting a data line; FALSE for a regex
1757 p points to a byte string
1758 utf true if UTF-8 (to be converted to UTF-32)
1759 len number of bytes in the string (excluding trailing zero)
1760
1761 Returns: number of 32-bit data items used (excluding trailing zero)
1762 OR -1 if a UTF-8 string is malformed
1763 OR -2 if a value > 0x10ffff is encountered
1764 OR -3 if an ill-formed value is encountered (i.e. a surrogate)
1765 */
1766
1767 static int
to32(int data,pcre_uint8 * p,int utf,int len)1768 to32(int data, pcre_uint8 *p, int utf, int len)
1769 {
1770 pcre_uint32 *pp;
1771
1772 if (buffer32_size < 4*len + 4)
1773 {
1774 if (buffer32 != NULL) free(buffer32);
1775 buffer32_size = 4*len + 4;
1776 buffer32 = (pcre_uint32 *)malloc(buffer32_size);
1777 if (buffer32 == NULL)
1778 {
1779 fprintf(stderr, "pcretest: malloc(%d) failed for buffer32\n", buffer32_size);
1780 exit(1);
1781 }
1782 }
1783
1784 pp = buffer32;
1785
1786 if (!utf && !data)
1787 {
1788 while (len-- > 0) *pp++ = *p++;
1789 }
1790
1791 else
1792 {
1793 pcre_uint32 c = 0;
1794 while (len > 0)
1795 {
1796 int chlen = utf82ord(p, &c);
1797 if (chlen <= 0) return -1;
1798 if (utf)
1799 {
1800 if (c > 0x10ffff) return -2;
1801 if (!data && (c & 0xfffff800u) == 0xd800u) return -3;
1802 }
1803
1804 p += chlen;
1805 len -= chlen;
1806 *pp++ = c;
1807 }
1808 }
1809
1810 *pp = 0;
1811 return pp - buffer32;
1812 }
1813
1814 /* Check that a 32-bit character string is valid UTF-32.
1815
1816 Arguments:
1817 string points to the string
1818 length length of string, or -1 if the string is zero-terminated
1819
1820 Returns: TRUE if the string is a valid UTF-32 string
1821 FALSE otherwise
1822 */
1823
1824 #ifdef NEVER /* Not used */
1825 #ifdef SUPPORT_UTF
1826 static BOOL
valid_utf32(pcre_uint32 * string,int length)1827 valid_utf32(pcre_uint32 *string, int length)
1828 {
1829 register pcre_uint32 *p;
1830 register pcre_uint32 c;
1831
1832 for (p = string; length-- > 0; p++)
1833 {
1834 c = *p;
1835 if (c > 0x10ffffu) return FALSE; /* Too big */
1836 if ((c & 0xfffff800u) == 0xd800u) return FALSE; /* Surrogate */
1837 }
1838
1839 return TRUE;
1840 }
1841 #endif /* SUPPORT_UTF */
1842 #endif /* NEVER */
1843 #endif /* SUPPORT_PCRE32 */
1844
1845
1846 /*************************************************
1847 * Read or extend an input line *
1848 *************************************************/
1849
1850 /* Input lines are read into buffer, but both patterns and data lines can be
1851 continued over multiple input lines. In addition, if the buffer fills up, we
1852 want to automatically expand it so as to be able to handle extremely large
1853 lines that are needed for certain stress tests. When the input buffer is
1854 expanded, the other two buffers must also be expanded likewise, and the
1855 contents of pbuffer, which are a copy of the input for callouts, must be
1856 preserved (for when expansion happens for a data line). This is not the most
1857 optimal way of handling this, but hey, this is just a test program!
1858
1859 Arguments:
1860 f the file to read
1861 start where in buffer to start (this *must* be within buffer)
1862 prompt for stdin or readline()
1863
1864 Returns: pointer to the start of new data
1865 could be a copy of start, or could be moved
1866 NULL if no data read and EOF reached
1867 */
1868
1869 static pcre_uint8 *
extend_inputline(FILE * f,pcre_uint8 * start,const char * prompt)1870 extend_inputline(FILE *f, pcre_uint8 *start, const char *prompt)
1871 {
1872 pcre_uint8 *here = start;
1873
1874 for (;;)
1875 {
1876 size_t rlen = (size_t)(buffer_size - (here - buffer));
1877
1878 if (rlen > 1000)
1879 {
1880 int dlen;
1881
1882 /* If libreadline or libedit support is required, use readline() to read a
1883 line if the input is a terminal. Note that readline() removes the trailing
1884 newline, so we must put it back again, to be compatible with fgets(). */
1885
1886 #if defined(SUPPORT_LIBREADLINE) || defined(SUPPORT_LIBEDIT)
1887 if (isatty(fileno(f)))
1888 {
1889 size_t len;
1890 char *s = readline(prompt);
1891 if (s == NULL) return (here == start)? NULL : start;
1892 len = strlen(s);
1893 if (len > 0) add_history(s);
1894 if (len > rlen - 1) len = rlen - 1;
1895 memcpy(here, s, len);
1896 here[len] = '\n';
1897 here[len+1] = 0;
1898 free(s);
1899 }
1900 else
1901 #endif
1902
1903 /* Read the next line by normal means, prompting if the file is stdin. */
1904
1905 {
1906 if (f == stdin) printf("%s", prompt);
1907 if (fgets((char *)here, rlen, f) == NULL)
1908 return (here == start)? NULL : start;
1909 }
1910
1911 dlen = (int)strlen((char *)here);
1912 if (dlen > 0 && here[dlen - 1] == '\n') return start;
1913 here += dlen;
1914 }
1915
1916 else
1917 {
1918 int new_buffer_size = 2*buffer_size;
1919 pcre_uint8 *new_buffer = (pcre_uint8 *)malloc(new_buffer_size);
1920 pcre_uint8 *new_pbuffer = (pcre_uint8 *)malloc(new_buffer_size);
1921
1922 if (new_buffer == NULL || new_pbuffer == NULL)
1923 {
1924 fprintf(stderr, "pcretest: malloc(%d) failed\n", new_buffer_size);
1925 exit(1);
1926 }
1927
1928 memcpy(new_buffer, buffer, buffer_size);
1929 memcpy(new_pbuffer, pbuffer, buffer_size);
1930
1931 buffer_size = new_buffer_size;
1932
1933 start = new_buffer + (start - buffer);
1934 here = new_buffer + (here - buffer);
1935
1936 free(buffer);
1937 free(pbuffer);
1938
1939 buffer = new_buffer;
1940 pbuffer = new_pbuffer;
1941 }
1942 }
1943
1944 /* Control never gets here */
1945 }
1946
1947
1948
1949 /*************************************************
1950 * Read number from string *
1951 *************************************************/
1952
1953 /* We don't use strtoul() because SunOS4 doesn't have it. Rather than mess
1954 around with conditional compilation, just do the job by hand. It is only used
1955 for unpicking arguments, so just keep it simple.
1956
1957 Arguments:
1958 str string to be converted
1959 endptr where to put the end pointer
1960
1961 Returns: the unsigned long
1962 */
1963
1964 static int
get_value(pcre_uint8 * str,pcre_uint8 ** endptr)1965 get_value(pcre_uint8 *str, pcre_uint8 **endptr)
1966 {
1967 int result = 0;
1968 while(*str != 0 && isspace(*str)) str++;
1969 while (isdigit(*str)) result = result * 10 + (int)(*str++ - '0');
1970 *endptr = str;
1971 return(result);
1972 }
1973
1974
1975
1976 /*************************************************
1977 * Print one character *
1978 *************************************************/
1979
1980 /* Print a single character either literally, or as a hex escape. */
1981
pchar(pcre_uint32 c,FILE * f)1982 static int pchar(pcre_uint32 c, FILE *f)
1983 {
1984 int n = 0;
1985 if (PRINTOK(c))
1986 {
1987 if (f != NULL) fprintf(f, "%c", c);
1988 return 1;
1989 }
1990
1991 if (c < 0x100)
1992 {
1993 if (use_utf)
1994 {
1995 if (f != NULL) fprintf(f, "\\x{%02x}", c);
1996 return 6;
1997 }
1998 else
1999 {
2000 if (f != NULL) fprintf(f, "\\x%02x", c);
2001 return 4;
2002 }
2003 }
2004
2005 if (f != NULL) n = fprintf(f, "\\x{%02x}", c);
2006 return n >= 0 ? n : 0;
2007 }
2008
2009
2010
2011 #ifdef SUPPORT_PCRE8
2012 /*************************************************
2013 * Print 8-bit character string *
2014 *************************************************/
2015
2016 /* Must handle UTF-8 strings in utf8 mode. Yields number of characters printed.
2017 If handed a NULL file, just counts chars without printing. */
2018
pchars(pcre_uint8 * p,int length,FILE * f)2019 static int pchars(pcre_uint8 *p, int length, FILE *f)
2020 {
2021 pcre_uint32 c = 0;
2022 int yield = 0;
2023
2024 if (length < 0)
2025 length = strlen((char *)p);
2026
2027 while (length-- > 0)
2028 {
2029 #if !defined NOUTF
2030 if (use_utf)
2031 {
2032 int rc = utf82ord(p, &c);
2033 if (rc > 0 && rc <= length + 1) /* Mustn't run over the end */
2034 {
2035 length -= rc - 1;
2036 p += rc;
2037 yield += pchar(c, f);
2038 continue;
2039 }
2040 }
2041 #endif
2042 c = *p++;
2043 yield += pchar(c, f);
2044 }
2045
2046 return yield;
2047 }
2048 #endif
2049
2050
2051
2052 #ifdef SUPPORT_PCRE16
2053 /*************************************************
2054 * Find length of 0-terminated 16-bit string *
2055 *************************************************/
2056
strlen16(PCRE_SPTR16 p)2057 static int strlen16(PCRE_SPTR16 p)
2058 {
2059 PCRE_SPTR16 pp = p;
2060 while (*pp != 0) pp++;
2061 return (int)(pp - p);
2062 }
2063 #endif /* SUPPORT_PCRE16 */
2064
2065
2066
2067 #ifdef SUPPORT_PCRE32
2068 /*************************************************
2069 * Find length of 0-terminated 32-bit string *
2070 *************************************************/
2071
strlen32(PCRE_SPTR32 p)2072 static int strlen32(PCRE_SPTR32 p)
2073 {
2074 PCRE_SPTR32 pp = p;
2075 while (*pp != 0) pp++;
2076 return (int)(pp - p);
2077 }
2078 #endif /* SUPPORT_PCRE32 */
2079
2080
2081
2082 #ifdef SUPPORT_PCRE16
2083 /*************************************************
2084 * Print 16-bit character string *
2085 *************************************************/
2086
2087 /* Must handle UTF-16 strings in utf mode. Yields number of characters printed.
2088 If handed a NULL file, just counts chars without printing. */
2089
pchars16(PCRE_SPTR16 p,int length,FILE * f)2090 static int pchars16(PCRE_SPTR16 p, int length, FILE *f)
2091 {
2092 int yield = 0;
2093
2094 if (length < 0)
2095 length = strlen16(p);
2096
2097 while (length-- > 0)
2098 {
2099 pcre_uint32 c = *p++ & 0xffff;
2100 #if !defined NOUTF
2101 if (use_utf && c >= 0xD800 && c < 0xDC00 && length > 0)
2102 {
2103 int d = *p & 0xffff;
2104 if (d >= 0xDC00 && d <= 0xDFFF)
2105 {
2106 c = ((c & 0x3ff) << 10) + (d & 0x3ff) + 0x10000;
2107 length--;
2108 p++;
2109 }
2110 }
2111 #endif
2112 yield += pchar(c, f);
2113 }
2114
2115 return yield;
2116 }
2117 #endif /* SUPPORT_PCRE16 */
2118
2119
2120
2121 #ifdef SUPPORT_PCRE32
2122 /*************************************************
2123 * Print 32-bit character string *
2124 *************************************************/
2125
2126 /* Must handle UTF-32 strings in utf mode. Yields number of characters printed.
2127 If handed a NULL file, just counts chars without printing. */
2128
pchars32(PCRE_SPTR32 p,int length,BOOL utf,FILE * f)2129 static int pchars32(PCRE_SPTR32 p, int length, BOOL utf, FILE *f)
2130 {
2131 int yield = 0;
2132
2133 (void)(utf); /* Avoid compiler warning */
2134
2135 if (length < 0)
2136 length = strlen32(p);
2137
2138 while (length-- > 0)
2139 {
2140 pcre_uint32 c = *p++;
2141 yield += pchar(c, f);
2142 }
2143
2144 return yield;
2145 }
2146 #endif /* SUPPORT_PCRE32 */
2147
2148
2149
2150 #ifdef SUPPORT_PCRE8
2151 /*************************************************
2152 * Read a capture name (8-bit) and check it *
2153 *************************************************/
2154
2155 static pcre_uint8 *
read_capture_name8(pcre_uint8 * p,pcre_uint8 ** pp,pcre * re)2156 read_capture_name8(pcre_uint8 *p, pcre_uint8 **pp, pcre *re)
2157 {
2158 pcre_uint8 *npp = *pp;
2159 while (isalnum(*p)) *npp++ = *p++;
2160 *npp++ = 0;
2161 *npp = 0;
2162 if (pcre_get_stringnumber(re, (char *)(*pp)) < 0)
2163 {
2164 fprintf(outfile, "no parentheses with name \"");
2165 PCHARSV(*pp, 0, -1, outfile);
2166 fprintf(outfile, "\"\n");
2167 }
2168
2169 *pp = npp;
2170 return p;
2171 }
2172 #endif /* SUPPORT_PCRE8 */
2173
2174
2175
2176 #ifdef SUPPORT_PCRE16
2177 /*************************************************
2178 * Read a capture name (16-bit) and check it *
2179 *************************************************/
2180
2181 /* Note that the text being read is 8-bit. */
2182
2183 static pcre_uint8 *
read_capture_name16(pcre_uint8 * p,pcre_uint16 ** pp,pcre * re)2184 read_capture_name16(pcre_uint8 *p, pcre_uint16 **pp, pcre *re)
2185 {
2186 pcre_uint16 *npp = *pp;
2187 while (isalnum(*p)) *npp++ = *p++;
2188 *npp++ = 0;
2189 *npp = 0;
2190 if (pcre16_get_stringnumber((pcre16 *)re, (PCRE_SPTR16)(*pp)) < 0)
2191 {
2192 fprintf(outfile, "no parentheses with name \"");
2193 PCHARSV(*pp, 0, -1, outfile);
2194 fprintf(outfile, "\"\n");
2195 }
2196 *pp = npp;
2197 return p;
2198 }
2199 #endif /* SUPPORT_PCRE16 */
2200
2201
2202
2203 #ifdef SUPPORT_PCRE32
2204 /*************************************************
2205 * Read a capture name (32-bit) and check it *
2206 *************************************************/
2207
2208 /* Note that the text being read is 8-bit. */
2209
2210 static pcre_uint8 *
read_capture_name32(pcre_uint8 * p,pcre_uint32 ** pp,pcre * re)2211 read_capture_name32(pcre_uint8 *p, pcre_uint32 **pp, pcre *re)
2212 {
2213 pcre_uint32 *npp = *pp;
2214 while (isalnum(*p)) *npp++ = *p++;
2215 *npp++ = 0;
2216 *npp = 0;
2217 if (pcre32_get_stringnumber((pcre32 *)re, (PCRE_SPTR32)(*pp)) < 0)
2218 {
2219 fprintf(outfile, "no parentheses with name \"");
2220 PCHARSV(*pp, 0, -1, outfile);
2221 fprintf(outfile, "\"\n");
2222 }
2223 *pp = npp;
2224 return p;
2225 }
2226 #endif /* SUPPORT_PCRE32 */
2227
2228
2229
2230 /*************************************************
2231 * Stack guard function *
2232 *************************************************/
2233
2234 /* Called from PCRE when set in pcre_stack_guard. We give an error (non-zero)
2235 return when a count overflows. */
2236
stack_guard(void)2237 static int stack_guard(void)
2238 {
2239 return stack_guard_return;
2240 }
2241
2242 /*************************************************
2243 * Callout function *
2244 *************************************************/
2245
2246 /* Called from PCRE as a result of the (?C) item. We print out where we are in
2247 the match. Yield zero unless more callouts than the fail count, or the callout
2248 data is not zero. */
2249
callout(pcre_callout_block * cb)2250 static int callout(pcre_callout_block *cb)
2251 {
2252 FILE *f = (first_callout | callout_extra)? outfile : NULL;
2253 int i, pre_start, post_start, subject_length;
2254
2255 if (callout_extra)
2256 {
2257 fprintf(f, "Callout %d: last capture = %d\n",
2258 cb->callout_number, cb->capture_last);
2259
2260 for (i = 0; i < cb->capture_top * 2; i += 2)
2261 {
2262 if (cb->offset_vector[i] < 0)
2263 fprintf(f, "%2d: <unset>\n", i/2);
2264 else
2265 {
2266 fprintf(f, "%2d: ", i/2);
2267 PCHARSV(cb->subject, cb->offset_vector[i],
2268 cb->offset_vector[i+1] - cb->offset_vector[i], f);
2269 fprintf(f, "\n");
2270 }
2271 }
2272 }
2273
2274 /* Re-print the subject in canonical form, the first time or if giving full
2275 datails. On subsequent calls in the same match, we use pchars just to find the
2276 printed lengths of the substrings. */
2277
2278 if (f != NULL) fprintf(f, "--->");
2279
2280 PCHARS(pre_start, cb->subject, 0, cb->start_match, f);
2281 PCHARS(post_start, cb->subject, cb->start_match,
2282 cb->current_position - cb->start_match, f);
2283
2284 PCHARS(subject_length, cb->subject, 0, cb->subject_length, NULL);
2285
2286 PCHARSV(cb->subject, cb->current_position,
2287 cb->subject_length - cb->current_position, f);
2288
2289 if (f != NULL) fprintf(f, "\n");
2290
2291 /* Always print appropriate indicators, with callout number if not already
2292 shown. For automatic callouts, show the pattern offset. */
2293
2294 if (cb->callout_number == 255)
2295 {
2296 fprintf(outfile, "%+3d ", cb->pattern_position);
2297 if (cb->pattern_position > 99) fprintf(outfile, "\n ");
2298 }
2299 else
2300 {
2301 if (callout_extra) fprintf(outfile, " ");
2302 else fprintf(outfile, "%3d ", cb->callout_number);
2303 }
2304
2305 for (i = 0; i < pre_start; i++) fprintf(outfile, " ");
2306 fprintf(outfile, "^");
2307
2308 if (post_start > 0)
2309 {
2310 for (i = 0; i < post_start - 1; i++) fprintf(outfile, " ");
2311 fprintf(outfile, "^");
2312 }
2313
2314 for (i = 0; i < subject_length - pre_start - post_start + 4; i++)
2315 fprintf(outfile, " ");
2316
2317 fprintf(outfile, "%.*s", (cb->next_item_length == 0)? 1 : cb->next_item_length,
2318 pbuffer + cb->pattern_position);
2319
2320 fprintf(outfile, "\n");
2321 first_callout = 0;
2322
2323 if (cb->mark != last_callout_mark)
2324 {
2325 if (cb->mark == NULL)
2326 fprintf(outfile, "Latest Mark: <unset>\n");
2327 else
2328 {
2329 fprintf(outfile, "Latest Mark: ");
2330 PCHARSV(cb->mark, 0, -1, outfile);
2331 putc('\n', outfile);
2332 }
2333 last_callout_mark = cb->mark;
2334 }
2335
2336 if (cb->callout_data != NULL)
2337 {
2338 int callout_data = *((int *)(cb->callout_data));
2339 if (callout_data != 0)
2340 {
2341 fprintf(outfile, "Callout data = %d\n", callout_data);
2342 return callout_data;
2343 }
2344 }
2345
2346 return (cb->callout_number != callout_fail_id)? 0 :
2347 (++callout_count >= callout_fail_count)? 1 : 0;
2348 }
2349
2350
2351 /*************************************************
2352 * Local malloc functions *
2353 *************************************************/
2354
2355 /* Alternative malloc function, to test functionality and save the size of a
2356 compiled re, which is the first store request that pcre_compile() makes. The
2357 show_malloc variable is set only during matching. */
2358
new_malloc(size_t size)2359 static void *new_malloc(size_t size)
2360 {
2361 void *block = malloc(size);
2362 if (show_malloc)
2363 fprintf(outfile, "malloc %3d %p\n", (int)size, block);
2364 return block;
2365 }
2366
new_free(void * block)2367 static void new_free(void *block)
2368 {
2369 if (show_malloc)
2370 fprintf(outfile, "free %p\n", block);
2371 free(block);
2372 }
2373
2374 /* For recursion malloc/free, to test stacking calls */
2375
stack_malloc(size_t size)2376 static void *stack_malloc(size_t size)
2377 {
2378 void *block = malloc(size);
2379 if (show_malloc)
2380 fprintf(outfile, "stack_malloc %3d %p\n", (int)size, block);
2381 return block;
2382 }
2383
stack_free(void * block)2384 static void stack_free(void *block)
2385 {
2386 if (show_malloc)
2387 fprintf(outfile, "stack_free %p\n", block);
2388 free(block);
2389 }
2390
2391
2392 /*************************************************
2393 * Call pcre_fullinfo() *
2394 *************************************************/
2395
2396 /* Get one piece of information from the pcre_fullinfo() function. When only
2397 one of 8-, 16- or 32-bit is supported, pcre_mode should always have the correct
2398 value, but the code is defensive.
2399
2400 Arguments:
2401 re compiled regex
2402 study study data
2403 option PCRE_INFO_xxx option
2404 ptr where to put the data
2405
2406 Returns: 0 when OK, < 0 on error
2407 */
2408
2409 static int
new_info(pcre * re,pcre_extra * study,int option,void * ptr)2410 new_info(pcre *re, pcre_extra *study, int option, void *ptr)
2411 {
2412 int rc;
2413
2414 if (pcre_mode == PCRE32_MODE)
2415 #ifdef SUPPORT_PCRE32
2416 rc = pcre32_fullinfo((pcre32 *)re, (pcre32_extra *)study, option, ptr);
2417 #else
2418 rc = PCRE_ERROR_BADMODE;
2419 #endif
2420 else if (pcre_mode == PCRE16_MODE)
2421 #ifdef SUPPORT_PCRE16
2422 rc = pcre16_fullinfo((pcre16 *)re, (pcre16_extra *)study, option, ptr);
2423 #else
2424 rc = PCRE_ERROR_BADMODE;
2425 #endif
2426 else
2427 #ifdef SUPPORT_PCRE8
2428 rc = pcre_fullinfo(re, study, option, ptr);
2429 #else
2430 rc = PCRE_ERROR_BADMODE;
2431 #endif
2432
2433 if (rc < 0 && rc != PCRE_ERROR_UNSET)
2434 {
2435 fprintf(outfile, "Error %d from pcre%s_fullinfo(%d)\n", rc,
2436 pcre_mode == PCRE32_MODE ? "32" : pcre_mode == PCRE16_MODE ? "16" : "", option);
2437 if (rc == PCRE_ERROR_BADMODE)
2438 fprintf(outfile, "Running in %d-bit mode but pattern was compiled in "
2439 "%d-bit mode\n", 8 * CHAR_SIZE,
2440 8 * (REAL_PCRE_FLAGS(re) & PCRE_MODE_MASK));
2441 }
2442
2443 return rc;
2444 }
2445
2446
2447
2448 /*************************************************
2449 * Swap byte functions *
2450 *************************************************/
2451
2452 /* The following functions swap the bytes of a pcre_uint16 and pcre_uint32
2453 value, respectively.
2454
2455 Arguments:
2456 value any number
2457
2458 Returns: the byte swapped value
2459 */
2460
2461 static pcre_uint32
swap_uint32(pcre_uint32 value)2462 swap_uint32(pcre_uint32 value)
2463 {
2464 return ((value & 0x000000ff) << 24) |
2465 ((value & 0x0000ff00) << 8) |
2466 ((value & 0x00ff0000) >> 8) |
2467 (value >> 24);
2468 }
2469
2470 static pcre_uint16
swap_uint16(pcre_uint16 value)2471 swap_uint16(pcre_uint16 value)
2472 {
2473 return (value >> 8) | (value << 8);
2474 }
2475
2476
2477
2478 /*************************************************
2479 * Flip bytes in a compiled pattern *
2480 *************************************************/
2481
2482 /* This function is called if the 'F' option was present on a pattern that is
2483 to be written to a file. We flip the bytes of all the integer fields in the
2484 regex data block and the study block. In 16-bit mode this also flips relevant
2485 bytes in the pattern itself. This is to make it possible to test PCRE's
2486 ability to reload byte-flipped patterns, e.g. those compiled on a different
2487 architecture. */
2488
2489 #if defined SUPPORT_PCRE8 || defined SUPPORT_PCRE16
2490 static void
regexflip8_or_16(pcre * ere,pcre_extra * extra)2491 regexflip8_or_16(pcre *ere, pcre_extra *extra)
2492 {
2493 real_pcre8_or_16 *re = (real_pcre8_or_16 *)ere;
2494 #ifdef SUPPORT_PCRE16
2495 int op;
2496 pcre_uint16 *ptr = (pcre_uint16 *)re + re->name_table_offset;
2497 int length = re->name_count * re->name_entry_size;
2498 #ifdef SUPPORT_UTF
2499 BOOL utf = (re->options & PCRE_UTF16) != 0;
2500 BOOL utf16_char = FALSE;
2501 #endif /* SUPPORT_UTF */
2502 #endif /* SUPPORT_PCRE16 */
2503
2504 /* Always flip the bytes in the main data block and study blocks. */
2505
2506 re->magic_number = REVERSED_MAGIC_NUMBER;
2507 re->size = swap_uint32(re->size);
2508 re->options = swap_uint32(re->options);
2509 re->flags = swap_uint32(re->flags);
2510 re->limit_match = swap_uint32(re->limit_match);
2511 re->limit_recursion = swap_uint32(re->limit_recursion);
2512 re->first_char = swap_uint16(re->first_char);
2513 re->req_char = swap_uint16(re->req_char);
2514 re->max_lookbehind = swap_uint16(re->max_lookbehind);
2515 re->top_bracket = swap_uint16(re->top_bracket);
2516 re->top_backref = swap_uint16(re->top_backref);
2517 re->name_table_offset = swap_uint16(re->name_table_offset);
2518 re->name_entry_size = swap_uint16(re->name_entry_size);
2519 re->name_count = swap_uint16(re->name_count);
2520 re->ref_count = swap_uint16(re->ref_count);
2521
2522 if (extra != NULL)
2523 {
2524 pcre_study_data *rsd = (pcre_study_data *)(extra->study_data);
2525 rsd->size = swap_uint32(rsd->size);
2526 rsd->flags = swap_uint32(rsd->flags);
2527 rsd->minlength = swap_uint32(rsd->minlength);
2528 }
2529
2530 /* In 8-bit mode, that is all we need to do. In 16-bit mode we must swap bytes
2531 in the name table, if present, and then in the pattern itself. */
2532
2533 #ifdef SUPPORT_PCRE16
2534 if (pcre_mode != PCRE16_MODE) return;
2535
2536 while(TRUE)
2537 {
2538 /* Swap previous characters. */
2539 while (length-- > 0)
2540 {
2541 *ptr = swap_uint16(*ptr);
2542 ptr++;
2543 }
2544 #ifdef SUPPORT_UTF
2545 if (utf16_char)
2546 {
2547 if ((ptr[-1] & 0xfc00) == 0xd800)
2548 {
2549 /* We know that there is only one extra character in UTF-16. */
2550 *ptr = swap_uint16(*ptr);
2551 ptr++;
2552 }
2553 }
2554 utf16_char = FALSE;
2555 #endif /* SUPPORT_UTF */
2556
2557 /* Get next opcode. */
2558
2559 length = 0;
2560 op = *ptr;
2561 *ptr++ = swap_uint16(op);
2562
2563 switch (op)
2564 {
2565 case OP_END:
2566 return;
2567
2568 #ifdef SUPPORT_UTF
2569 case OP_CHAR:
2570 case OP_CHARI:
2571 case OP_NOT:
2572 case OP_NOTI:
2573 case OP_STAR:
2574 case OP_MINSTAR:
2575 case OP_PLUS:
2576 case OP_MINPLUS:
2577 case OP_QUERY:
2578 case OP_MINQUERY:
2579 case OP_UPTO:
2580 case OP_MINUPTO:
2581 case OP_EXACT:
2582 case OP_POSSTAR:
2583 case OP_POSPLUS:
2584 case OP_POSQUERY:
2585 case OP_POSUPTO:
2586 case OP_STARI:
2587 case OP_MINSTARI:
2588 case OP_PLUSI:
2589 case OP_MINPLUSI:
2590 case OP_QUERYI:
2591 case OP_MINQUERYI:
2592 case OP_UPTOI:
2593 case OP_MINUPTOI:
2594 case OP_EXACTI:
2595 case OP_POSSTARI:
2596 case OP_POSPLUSI:
2597 case OP_POSQUERYI:
2598 case OP_POSUPTOI:
2599 case OP_NOTSTAR:
2600 case OP_NOTMINSTAR:
2601 case OP_NOTPLUS:
2602 case OP_NOTMINPLUS:
2603 case OP_NOTQUERY:
2604 case OP_NOTMINQUERY:
2605 case OP_NOTUPTO:
2606 case OP_NOTMINUPTO:
2607 case OP_NOTEXACT:
2608 case OP_NOTPOSSTAR:
2609 case OP_NOTPOSPLUS:
2610 case OP_NOTPOSQUERY:
2611 case OP_NOTPOSUPTO:
2612 case OP_NOTSTARI:
2613 case OP_NOTMINSTARI:
2614 case OP_NOTPLUSI:
2615 case OP_NOTMINPLUSI:
2616 case OP_NOTQUERYI:
2617 case OP_NOTMINQUERYI:
2618 case OP_NOTUPTOI:
2619 case OP_NOTMINUPTOI:
2620 case OP_NOTEXACTI:
2621 case OP_NOTPOSSTARI:
2622 case OP_NOTPOSPLUSI:
2623 case OP_NOTPOSQUERYI:
2624 case OP_NOTPOSUPTOI:
2625 if (utf) utf16_char = TRUE;
2626 #endif
2627 /* Fall through. */
2628
2629 default:
2630 length = OP_lengths16[op] - 1;
2631 break;
2632
2633 case OP_CLASS:
2634 case OP_NCLASS:
2635 /* Skip the character bit map. */
2636 ptr += 32/sizeof(pcre_uint16);
2637 length = 0;
2638 break;
2639
2640 case OP_XCLASS:
2641 /* LINK_SIZE can be 1 or 2 in 16 bit mode. */
2642 if (LINK_SIZE > 1)
2643 length = (int)((((unsigned int)(ptr[0]) << 16) | (unsigned int)(ptr[1]))
2644 - (1 + LINK_SIZE + 1));
2645 else
2646 length = (int)((unsigned int)(ptr[0]) - (1 + LINK_SIZE + 1));
2647
2648 /* Reverse the size of the XCLASS instance. */
2649 *ptr = swap_uint16(*ptr);
2650 ptr++;
2651 if (LINK_SIZE > 1)
2652 {
2653 *ptr = swap_uint16(*ptr);
2654 ptr++;
2655 }
2656
2657 op = *ptr;
2658 *ptr = swap_uint16(op);
2659 ptr++;
2660 if ((op & XCL_MAP) != 0)
2661 {
2662 /* Skip the character bit map. */
2663 ptr += 32/sizeof(pcre_uint16);
2664 length -= 32/sizeof(pcre_uint16);
2665 }
2666 break;
2667 }
2668 }
2669 /* Control should never reach here in 16 bit mode. */
2670 #endif /* SUPPORT_PCRE16 */
2671 }
2672 #endif /* SUPPORT_PCRE[8|16] */
2673
2674
2675
2676 #if defined SUPPORT_PCRE32
2677 static void
regexflip_32(pcre * ere,pcre_extra * extra)2678 regexflip_32(pcre *ere, pcre_extra *extra)
2679 {
2680 real_pcre32 *re = (real_pcre32 *)ere;
2681 int op;
2682 pcre_uint32 *ptr = (pcre_uint32 *)re + re->name_table_offset;
2683 int length = re->name_count * re->name_entry_size;
2684
2685 /* Always flip the bytes in the main data block and study blocks. */
2686
2687 re->magic_number = REVERSED_MAGIC_NUMBER;
2688 re->size = swap_uint32(re->size);
2689 re->options = swap_uint32(re->options);
2690 re->flags = swap_uint32(re->flags);
2691 re->limit_match = swap_uint32(re->limit_match);
2692 re->limit_recursion = swap_uint32(re->limit_recursion);
2693 re->first_char = swap_uint32(re->first_char);
2694 re->req_char = swap_uint32(re->req_char);
2695 re->max_lookbehind = swap_uint16(re->max_lookbehind);
2696 re->top_bracket = swap_uint16(re->top_bracket);
2697 re->top_backref = swap_uint16(re->top_backref);
2698 re->name_table_offset = swap_uint16(re->name_table_offset);
2699 re->name_entry_size = swap_uint16(re->name_entry_size);
2700 re->name_count = swap_uint16(re->name_count);
2701 re->ref_count = swap_uint16(re->ref_count);
2702
2703 if (extra != NULL)
2704 {
2705 pcre_study_data *rsd = (pcre_study_data *)(extra->study_data);
2706 rsd->size = swap_uint32(rsd->size);
2707 rsd->flags = swap_uint32(rsd->flags);
2708 rsd->minlength = swap_uint32(rsd->minlength);
2709 }
2710
2711 /* In 32-bit mode we must swap bytes in the name table, if present, and then in
2712 the pattern itself. */
2713
2714 while(TRUE)
2715 {
2716 /* Swap previous characters. */
2717 while (length-- > 0)
2718 {
2719 *ptr = swap_uint32(*ptr);
2720 ptr++;
2721 }
2722
2723 /* Get next opcode. */
2724
2725 length = 0;
2726 op = *ptr;
2727 *ptr++ = swap_uint32(op);
2728
2729 switch (op)
2730 {
2731 case OP_END:
2732 return;
2733
2734 default:
2735 length = OP_lengths32[op] - 1;
2736 break;
2737
2738 case OP_CLASS:
2739 case OP_NCLASS:
2740 /* Skip the character bit map. */
2741 ptr += 32/sizeof(pcre_uint32);
2742 length = 0;
2743 break;
2744
2745 case OP_XCLASS:
2746 /* LINK_SIZE can only be 1 in 32-bit mode. */
2747 length = (int)((unsigned int)(ptr[0]) - (1 + LINK_SIZE + 1));
2748
2749 /* Reverse the size of the XCLASS instance. */
2750 *ptr = swap_uint32(*ptr);
2751 ptr++;
2752
2753 op = *ptr;
2754 *ptr = swap_uint32(op);
2755 ptr++;
2756 if ((op & XCL_MAP) != 0)
2757 {
2758 /* Skip the character bit map. */
2759 ptr += 32/sizeof(pcre_uint32);
2760 length -= 32/sizeof(pcre_uint32);
2761 }
2762 break;
2763 }
2764 }
2765 /* Control should never reach here in 32 bit mode. */
2766 }
2767
2768 #endif /* SUPPORT_PCRE32 */
2769
2770
2771
2772 static void
regexflip(pcre * ere,pcre_extra * extra)2773 regexflip(pcre *ere, pcre_extra *extra)
2774 {
2775 #if defined SUPPORT_PCRE32
2776 if (REAL_PCRE_FLAGS(ere) & PCRE_MODE32)
2777 regexflip_32(ere, extra);
2778 #endif
2779 #if defined SUPPORT_PCRE8 || defined SUPPORT_PCRE16
2780 if (REAL_PCRE_FLAGS(ere) & (PCRE_MODE8 | PCRE_MODE16))
2781 regexflip8_or_16(ere, extra);
2782 #endif
2783 }
2784
2785
2786
2787 /*************************************************
2788 * Check match or recursion limit *
2789 *************************************************/
2790
2791 static int
check_match_limit(pcre * re,pcre_extra * extra,pcre_uint8 * bptr,int len,int start_offset,int options,int * use_offsets,int use_size_offsets,int flag,unsigned long int * limit,int errnumber,const char * msg)2792 check_match_limit(pcre *re, pcre_extra *extra, pcre_uint8 *bptr, int len,
2793 int start_offset, int options, int *use_offsets, int use_size_offsets,
2794 int flag, unsigned long int *limit, int errnumber, const char *msg)
2795 {
2796 int count;
2797 int min = 0;
2798 int mid = 64;
2799 int max = -1;
2800
2801 extra->flags |= flag;
2802
2803 for (;;)
2804 {
2805 *limit = mid;
2806
2807 PCRE_EXEC(count, re, extra, bptr, len, start_offset, options,
2808 use_offsets, use_size_offsets);
2809
2810 if (count == errnumber)
2811 {
2812 /* fprintf(outfile, "Testing %s limit = %d\n", msg, mid); */
2813 min = mid;
2814 mid = (mid == max - 1)? max : (max > 0)? (min + max)/2 : mid*2;
2815 }
2816
2817 else if (count >= 0 || count == PCRE_ERROR_NOMATCH ||
2818 count == PCRE_ERROR_PARTIAL)
2819 {
2820 if (mid == min + 1)
2821 {
2822 fprintf(outfile, "Minimum %s limit = %d\n", msg, mid);
2823 break;
2824 }
2825 /* fprintf(outfile, "Testing %s limit = %d\n", msg, mid); */
2826 max = mid;
2827 mid = (min + mid)/2;
2828 }
2829 else break; /* Some other error */
2830 }
2831
2832 extra->flags &= ~flag;
2833 return count;
2834 }
2835
2836
2837
2838 /*************************************************
2839 * Case-independent strncmp() function *
2840 *************************************************/
2841
2842 /*
2843 Arguments:
2844 s first string
2845 t second string
2846 n number of characters to compare
2847
2848 Returns: < 0, = 0, or > 0, according to the comparison
2849 */
2850
2851 static int
strncmpic(pcre_uint8 * s,pcre_uint8 * t,int n)2852 strncmpic(pcre_uint8 *s, pcre_uint8 *t, int n)
2853 {
2854 while (n--)
2855 {
2856 int c = tolower(*s++) - tolower(*t++);
2857 if (c) return c;
2858 }
2859 return 0;
2860 }
2861
2862
2863
2864 /*************************************************
2865 * Check multicharacter option *
2866 *************************************************/
2867
2868 /* This is used both at compile and run-time to check for <xxx> escapes. Print
2869 a message and return 0 if there is no match.
2870
2871 Arguments:
2872 p points after the leading '<'
2873 f file for error message
2874 nl TRUE to check only for newline settings
2875 stype "modifier" or "escape sequence"
2876
2877 Returns: appropriate PCRE_NEWLINE_xxx flags, or 0
2878 */
2879
2880 static int
check_mc_option(pcre_uint8 * p,FILE * f,BOOL nl,const char * stype)2881 check_mc_option(pcre_uint8 *p, FILE *f, BOOL nl, const char *stype)
2882 {
2883 if (strncmpic(p, (pcre_uint8 *)"cr>", 3) == 0) return PCRE_NEWLINE_CR;
2884 if (strncmpic(p, (pcre_uint8 *)"lf>", 3) == 0) return PCRE_NEWLINE_LF;
2885 if (strncmpic(p, (pcre_uint8 *)"crlf>", 5) == 0) return PCRE_NEWLINE_CRLF;
2886 if (strncmpic(p, (pcre_uint8 *)"anycrlf>", 8) == 0) return PCRE_NEWLINE_ANYCRLF;
2887 if (strncmpic(p, (pcre_uint8 *)"any>", 4) == 0) return PCRE_NEWLINE_ANY;
2888 if (strncmpic(p, (pcre_uint8 *)"bsr_anycrlf>", 12) == 0) return PCRE_BSR_ANYCRLF;
2889 if (strncmpic(p, (pcre_uint8 *)"bsr_unicode>", 12) == 0) return PCRE_BSR_UNICODE;
2890
2891 if (!nl)
2892 {
2893 if (strncmpic(p, (pcre_uint8 *)"JS>", 3) == 0) return PCRE_JAVASCRIPT_COMPAT;
2894 }
2895
2896 fprintf(f, "Unknown %s at: <%s\n", stype, p);
2897 return 0;
2898 }
2899
2900
2901
2902 /*************************************************
2903 * Usage function *
2904 *************************************************/
2905
2906 static void
usage(void)2907 usage(void)
2908 {
2909 printf("Usage: pcretest [options] [<input file> [<output file>]]\n\n");
2910 printf("Input and output default to stdin and stdout.\n");
2911 #if defined(SUPPORT_LIBREADLINE) || defined(SUPPORT_LIBEDIT)
2912 printf("If input is a terminal, readline() is used to read from it.\n");
2913 #else
2914 printf("This version of pcretest is not linked with readline().\n");
2915 #endif
2916 printf("\nOptions:\n");
2917 #ifdef SUPPORT_PCRE16
2918 printf(" -16 use the 16-bit library\n");
2919 #endif
2920 #ifdef SUPPORT_PCRE32
2921 printf(" -32 use the 32-bit library\n");
2922 #endif
2923 printf(" -b show compiled code\n");
2924 printf(" -C show PCRE compile-time options and exit\n");
2925 printf(" -C arg show a specific compile-time option and exit\n");
2926 printf(" with its value if numeric (else 0). The arg can be:\n");
2927 printf(" linksize internal link size [2, 3, 4]\n");
2928 printf(" pcre8 8 bit library support enabled [0, 1]\n");
2929 printf(" pcre16 16 bit library support enabled [0, 1]\n");
2930 printf(" pcre32 32 bit library support enabled [0, 1]\n");
2931 printf(" utf Unicode Transformation Format supported [0, 1]\n");
2932 printf(" ucp Unicode Properties supported [0, 1]\n");
2933 printf(" jit Just-in-time compiler supported [0, 1]\n");
2934 printf(" newline Newline type [CR, LF, CRLF, ANYCRLF, ANY]\n");
2935 printf(" bsr \\R type [ANYCRLF, ANY]\n");
2936 printf(" -d debug: show compiled code and information (-b and -i)\n");
2937 #if !defined NODFA
2938 printf(" -dfa force DFA matching for all subjects\n");
2939 #endif
2940 printf(" -help show usage information\n");
2941 printf(" -i show information about compiled patterns\n"
2942 " -M find MATCH_LIMIT minimum for each subject\n"
2943 " -m output memory used information\n"
2944 " -O set PCRE_NO_AUTO_POSSESS on each pattern\n"
2945 " -o <n> set size of offsets vector to <n>\n");
2946 #if !defined NOPOSIX
2947 printf(" -p use POSIX interface\n");
2948 #endif
2949 printf(" -q quiet: do not output PCRE version number at start\n");
2950 printf(" -S <n> set stack size to <n> megabytes\n");
2951 printf(" -s force each pattern to be studied at basic level\n"
2952 " -s+ force each pattern to be studied, using JIT if available\n"
2953 " -s++ ditto, verifying when JIT was actually used\n"
2954 " -s+n force each pattern to be studied, using JIT if available,\n"
2955 " where 1 <= n <= 7 selects JIT options\n"
2956 " -s++n ditto, verifying when JIT was actually used\n"
2957 " -t time compilation and execution\n");
2958 printf(" -t <n> time compilation and execution, repeating <n> times\n");
2959 printf(" -tm time execution (matching) only\n");
2960 printf(" -tm <n> time execution (matching) only, repeating <n> times\n");
2961 printf(" -T same as -t, but show total times at the end\n");
2962 printf(" -TM same as -tm, but show total time at the end\n");
2963 }
2964
2965
2966
2967 /*************************************************
2968 * Main Program *
2969 *************************************************/
2970
2971 /* Read lines from named file or stdin and write to named file or stdout; lines
2972 consist of a regular expression, in delimiters and optionally followed by
2973 options, followed by a set of test data, terminated by an empty line. */
2974
main(int argc,char ** argv)2975 int main(int argc, char **argv)
2976 {
2977 FILE *infile = stdin;
2978 const char *version;
2979 int options = 0;
2980 int study_options = 0;
2981 int default_find_match_limit = FALSE;
2982 pcre_uint32 default_options = 0;
2983 int op = 1;
2984 int timeit = 0;
2985 int timeitm = 0;
2986 int showtotaltimes = 0;
2987 int showinfo = 0;
2988 int showstore = 0;
2989 int force_study = -1;
2990 int force_study_options = 0;
2991 int quiet = 0;
2992 int size_offsets = 45;
2993 int size_offsets_max;
2994 int *offsets = NULL;
2995 int debug = 0;
2996 int done = 0;
2997 int all_use_dfa = 0;
2998 int verify_jit = 0;
2999 int yield = 0;
3000 int stack_size;
3001 pcre_uint8 *dbuffer = NULL;
3002 pcre_uint8 lockout[24] = { 0 };
3003 size_t dbuffer_size = 1u << 14;
3004 clock_t total_compile_time = 0;
3005 clock_t total_study_time = 0;
3006 clock_t total_match_time = 0;
3007
3008 #if !defined NOPOSIX
3009 int posix = 0;
3010 #endif
3011 #if !defined NODFA
3012 int *dfa_workspace = NULL;
3013 #endif
3014
3015 pcre_jit_stack *jit_stack = NULL;
3016
3017 /* These vectors store, end-to-end, a list of zero-terminated captured
3018 substring names, each list itself being terminated by an empty name. Assume
3019 that 1024 is plenty long enough for the few names we'll be testing. It is
3020 easiest to keep separate 8-, 16- and 32-bit versions, using the 32-bit version
3021 for the actual memory, to ensure alignment. */
3022
3023 pcre_uint32 copynames[1024];
3024 pcre_uint32 getnames[1024];
3025
3026 #ifdef SUPPORT_PCRE32
3027 pcre_uint32 *cn32ptr;
3028 pcre_uint32 *gn32ptr;
3029 #endif
3030
3031 #ifdef SUPPORT_PCRE16
3032 pcre_uint16 *copynames16 = (pcre_uint16 *)copynames;
3033 pcre_uint16 *getnames16 = (pcre_uint16 *)getnames;
3034 pcre_uint16 *cn16ptr;
3035 pcre_uint16 *gn16ptr;
3036 #endif
3037
3038 #ifdef SUPPORT_PCRE8
3039 pcre_uint8 *copynames8 = (pcre_uint8 *)copynames;
3040 pcre_uint8 *getnames8 = (pcre_uint8 *)getnames;
3041 pcre_uint8 *cn8ptr;
3042 pcre_uint8 *gn8ptr;
3043 #endif
3044
3045 /* Get buffers from malloc() so that valgrind will check their misuse when
3046 debugging. They grow automatically when very long lines are read. The 16-
3047 and 32-bit buffers (buffer16, buffer32) are obtained only if needed. */
3048
3049 buffer = (pcre_uint8 *)malloc(buffer_size);
3050 pbuffer = (pcre_uint8 *)malloc(buffer_size);
3051
3052 /* The outfile variable is static so that new_malloc can use it. */
3053
3054 outfile = stdout;
3055
3056 /* The following _setmode() stuff is some Windows magic that tells its runtime
3057 library to translate CRLF into a single LF character. At least, that's what
3058 I've been told: never having used Windows I take this all on trust. Originally
3059 it set 0x8000, but then I was advised that _O_BINARY was better. */
3060
3061 #if defined(_WIN32) || defined(WIN32)
3062 _setmode( _fileno( stdout ), _O_BINARY );
3063 #endif
3064
3065 /* Get the version number: both pcre_version() and pcre16_version() give the
3066 same answer. We just need to ensure that we call one that is available. */
3067
3068 #if defined SUPPORT_PCRE8
3069 version = pcre_version();
3070 #elif defined SUPPORT_PCRE16
3071 version = pcre16_version();
3072 #elif defined SUPPORT_PCRE32
3073 version = pcre32_version();
3074 #endif
3075
3076 /* Scan options */
3077
3078 while (argc > 1 && argv[op][0] == '-')
3079 {
3080 pcre_uint8 *endptr;
3081 char *arg = argv[op];
3082
3083 if (strcmp(arg, "-m") == 0) showstore = 1;
3084 else if (strcmp(arg, "-s") == 0) force_study = 0;
3085
3086 else if (strncmp(arg, "-s+", 3) == 0)
3087 {
3088 arg += 3;
3089 if (*arg == '+') { arg++; verify_jit = TRUE; }
3090 force_study = 1;
3091 if (*arg == 0)
3092 force_study_options = jit_study_bits[6];
3093 else if (*arg >= '1' && *arg <= '7')
3094 force_study_options = jit_study_bits[*arg - '1'];
3095 else goto BAD_ARG;
3096 }
3097 else if (strcmp(arg, "-8") == 0)
3098 {
3099 #ifdef SUPPORT_PCRE8
3100 pcre_mode = PCRE8_MODE;
3101 #else
3102 printf("** This version of PCRE was built without 8-bit support\n");
3103 exit(1);
3104 #endif
3105 }
3106 else if (strcmp(arg, "-16") == 0)
3107 {
3108 #ifdef SUPPORT_PCRE16
3109 pcre_mode = PCRE16_MODE;
3110 #else
3111 printf("** This version of PCRE was built without 16-bit support\n");
3112 exit(1);
3113 #endif
3114 }
3115 else if (strcmp(arg, "-32") == 0)
3116 {
3117 #ifdef SUPPORT_PCRE32
3118 pcre_mode = PCRE32_MODE;
3119 #else
3120 printf("** This version of PCRE was built without 32-bit support\n");
3121 exit(1);
3122 #endif
3123 }
3124 else if (strcmp(arg, "-q") == 0) quiet = 1;
3125 else if (strcmp(arg, "-b") == 0) debug = 1;
3126 else if (strcmp(arg, "-i") == 0) showinfo = 1;
3127 else if (strcmp(arg, "-d") == 0) showinfo = debug = 1;
3128 else if (strcmp(arg, "-M") == 0) default_find_match_limit = TRUE;
3129 else if (strcmp(arg, "-O") == 0) default_options |= PCRE_NO_AUTO_POSSESS;
3130 #if !defined NODFA
3131 else if (strcmp(arg, "-dfa") == 0) all_use_dfa = 1;
3132 #endif
3133 else if (strcmp(arg, "-o") == 0 && argc > 2 &&
3134 ((size_offsets = get_value((pcre_uint8 *)argv[op+1], &endptr)),
3135 *endptr == 0))
3136 {
3137 op++;
3138 argc--;
3139 }
3140 else if (strcmp(arg, "-t") == 0 || strcmp(arg, "-tm") == 0 ||
3141 strcmp(arg, "-T") == 0 || strcmp(arg, "-TM") == 0)
3142 {
3143 int temp;
3144 int both = arg[2] == 0;
3145 showtotaltimes = arg[1] == 'T';
3146 if (argc > 2 && (temp = get_value((pcre_uint8 *)argv[op+1], &endptr),
3147 *endptr == 0))
3148 {
3149 timeitm = temp;
3150 op++;
3151 argc--;
3152 }
3153 else timeitm = LOOPREPEAT;
3154 if (both) timeit = timeitm;
3155 }
3156 else if (strcmp(arg, "-S") == 0 && argc > 2 &&
3157 ((stack_size = get_value((pcre_uint8 *)argv[op+1], &endptr)),
3158 *endptr == 0))
3159 {
3160 #if defined(_WIN32) || defined(WIN32) || defined(__minix) || defined(NATIVE_ZOS) || defined(__VMS)
3161 printf("PCRE: -S not supported on this OS\n");
3162 exit(1);
3163 #else
3164 int rc;
3165 struct rlimit rlim;
3166 getrlimit(RLIMIT_STACK, &rlim);
3167 rlim.rlim_cur = stack_size * 1024 * 1024;
3168 rc = setrlimit(RLIMIT_STACK, &rlim);
3169 if (rc != 0)
3170 {
3171 printf("PCRE: setrlimit() failed with error %d\n", rc);
3172 exit(1);
3173 }
3174 op++;
3175 argc--;
3176 #endif
3177 }
3178 #if !defined NOPOSIX
3179 else if (strcmp(arg, "-p") == 0) posix = 1;
3180 #endif
3181 else if (strcmp(arg, "-C") == 0)
3182 {
3183 int rc;
3184 unsigned long int lrc;
3185
3186 if (argc > 2)
3187 {
3188 if (strcmp(argv[op + 1], "linksize") == 0)
3189 {
3190 (void)PCRE_CONFIG(PCRE_CONFIG_LINK_SIZE, &rc);
3191 printf("%d\n", rc);
3192 yield = rc;
3193
3194 #ifdef __VMS
3195 vms_setsymbol("LINKSIZE",0,yield );
3196 #endif
3197 }
3198 else if (strcmp(argv[op + 1], "pcre8") == 0)
3199 {
3200 #ifdef SUPPORT_PCRE8
3201 printf("1\n");
3202 yield = 1;
3203 #else
3204 printf("0\n");
3205 yield = 0;
3206 #endif
3207 #ifdef __VMS
3208 vms_setsymbol("PCRE8",0,yield );
3209 #endif
3210 }
3211 else if (strcmp(argv[op + 1], "pcre16") == 0)
3212 {
3213 #ifdef SUPPORT_PCRE16
3214 printf("1\n");
3215 yield = 1;
3216 #else
3217 printf("0\n");
3218 yield = 0;
3219 #endif
3220 #ifdef __VMS
3221 vms_setsymbol("PCRE16",0,yield );
3222 #endif
3223 }
3224 else if (strcmp(argv[op + 1], "pcre32") == 0)
3225 {
3226 #ifdef SUPPORT_PCRE32
3227 printf("1\n");
3228 yield = 1;
3229 #else
3230 printf("0\n");
3231 yield = 0;
3232 #endif
3233 #ifdef __VMS
3234 vms_setsymbol("PCRE32",0,yield );
3235 #endif
3236 }
3237 else if (strcmp(argv[op + 1], "utf") == 0)
3238 {
3239 #ifdef SUPPORT_PCRE8
3240 if (pcre_mode == PCRE8_MODE)
3241 (void)pcre_config(PCRE_CONFIG_UTF8, &rc);
3242 #endif
3243 #ifdef SUPPORT_PCRE16
3244 if (pcre_mode == PCRE16_MODE)
3245 (void)pcre16_config(PCRE_CONFIG_UTF16, &rc);
3246 #endif
3247 #ifdef SUPPORT_PCRE32
3248 if (pcre_mode == PCRE32_MODE)
3249 (void)pcre32_config(PCRE_CONFIG_UTF32, &rc);
3250 #endif
3251 printf("%d\n", rc);
3252 yield = rc;
3253 #ifdef __VMS
3254 vms_setsymbol("UTF",0,yield );
3255 #endif
3256 }
3257 else if (strcmp(argv[op + 1], "ucp") == 0)
3258 {
3259 (void)PCRE_CONFIG(PCRE_CONFIG_UNICODE_PROPERTIES, &rc);
3260 printf("%d\n", rc);
3261 yield = rc;
3262 }
3263 else if (strcmp(argv[op + 1], "jit") == 0)
3264 {
3265 (void)PCRE_CONFIG(PCRE_CONFIG_JIT, &rc);
3266 printf("%d\n", rc);
3267 yield = rc;
3268 }
3269 else if (strcmp(argv[op + 1], "newline") == 0)
3270 {
3271 (void)PCRE_CONFIG(PCRE_CONFIG_NEWLINE, &rc);
3272 print_newline_config(rc, TRUE);
3273 }
3274 else if (strcmp(argv[op + 1], "bsr") == 0)
3275 {
3276 (void)PCRE_CONFIG(PCRE_CONFIG_BSR, &rc);
3277 printf("%s\n", rc? "ANYCRLF" : "ANY");
3278 }
3279 else if (strcmp(argv[op + 1], "ebcdic") == 0)
3280 {
3281 #ifdef EBCDIC
3282 printf("1\n");
3283 yield = 1;
3284 #else
3285 printf("0\n");
3286 #endif
3287 }
3288 else if (strcmp(argv[op + 1], "ebcdic-nl") == 0)
3289 {
3290 #ifdef EBCDIC
3291 printf("0x%02x\n", CHAR_LF);
3292 #else
3293 printf("0\n");
3294 #endif
3295 }
3296 else
3297 {
3298 printf("Unknown -C option: %s\n", argv[op + 1]);
3299 }
3300 goto EXIT;
3301 }
3302
3303 /* No argument for -C: output all configuration information. */
3304
3305 printf("PCRE version %s\n", version);
3306 printf("Compiled with\n");
3307
3308 #ifdef EBCDIC
3309 printf(" EBCDIC code support: LF is 0x%02x\n", CHAR_LF);
3310 #endif
3311
3312 /* At least one of SUPPORT_PCRE8 and SUPPORT_PCRE16 will be set. If both
3313 are set, either both UTFs are supported or both are not supported. */
3314
3315 #ifdef SUPPORT_PCRE8
3316 printf(" 8-bit support\n");
3317 (void)pcre_config(PCRE_CONFIG_UTF8, &rc);
3318 printf (" %sUTF-8 support\n", rc ? "" : "No ");
3319 #endif
3320 #ifdef SUPPORT_PCRE16
3321 printf(" 16-bit support\n");
3322 (void)pcre16_config(PCRE_CONFIG_UTF16, &rc);
3323 printf (" %sUTF-16 support\n", rc ? "" : "No ");
3324 #endif
3325 #ifdef SUPPORT_PCRE32
3326 printf(" 32-bit support\n");
3327 (void)pcre32_config(PCRE_CONFIG_UTF32, &rc);
3328 printf (" %sUTF-32 support\n", rc ? "" : "No ");
3329 #endif
3330
3331 (void)PCRE_CONFIG(PCRE_CONFIG_UNICODE_PROPERTIES, &rc);
3332 printf(" %sUnicode properties support\n", rc? "" : "No ");
3333 (void)PCRE_CONFIG(PCRE_CONFIG_JIT, &rc);
3334 if (rc)
3335 {
3336 const char *arch;
3337 (void)PCRE_CONFIG(PCRE_CONFIG_JITTARGET, (void *)(&arch));
3338 printf(" Just-in-time compiler support: %s\n", arch);
3339 }
3340 else
3341 printf(" No just-in-time compiler support\n");
3342 (void)PCRE_CONFIG(PCRE_CONFIG_NEWLINE, &rc);
3343 print_newline_config(rc, FALSE);
3344 (void)PCRE_CONFIG(PCRE_CONFIG_BSR, &rc);
3345 printf(" \\R matches %s\n", rc? "CR, LF, or CRLF only" :
3346 "all Unicode newlines");
3347 (void)PCRE_CONFIG(PCRE_CONFIG_LINK_SIZE, &rc);
3348 printf(" Internal link size = %d\n", rc);
3349 (void)PCRE_CONFIG(PCRE_CONFIG_POSIX_MALLOC_THRESHOLD, &rc);
3350 printf(" POSIX malloc threshold = %d\n", rc);
3351 (void)PCRE_CONFIG(PCRE_CONFIG_PARENS_LIMIT, &lrc);
3352 printf(" Parentheses nest limit = %ld\n", lrc);
3353 (void)PCRE_CONFIG(PCRE_CONFIG_MATCH_LIMIT, &lrc);
3354 printf(" Default match limit = %ld\n", lrc);
3355 (void)PCRE_CONFIG(PCRE_CONFIG_MATCH_LIMIT_RECURSION, &lrc);
3356 printf(" Default recursion depth limit = %ld\n", lrc);
3357 (void)PCRE_CONFIG(PCRE_CONFIG_STACKRECURSE, &rc);
3358 printf(" Match recursion uses %s", rc? "stack" : "heap");
3359 if (showstore)
3360 {
3361 PCRE_EXEC(stack_size, NULL, NULL, NULL, -999, -999, 0, NULL, 0);
3362 printf(": %sframe size = %d bytes", rc? "approximate " : "", -stack_size);
3363 }
3364 printf("\n");
3365 goto EXIT;
3366 }
3367 else if (strcmp(arg, "-help") == 0 ||
3368 strcmp(arg, "--help") == 0)
3369 {
3370 usage();
3371 goto EXIT;
3372 }
3373 else
3374 {
3375 BAD_ARG:
3376 printf("** Unknown or malformed option %s\n", arg);
3377 usage();
3378 yield = 1;
3379 goto EXIT;
3380 }
3381 op++;
3382 argc--;
3383 }
3384
3385 /* Get the store for the offsets vector, and remember what it was */
3386
3387 size_offsets_max = size_offsets;
3388 offsets = (int *)malloc(size_offsets_max * sizeof(int));
3389 if (offsets == NULL)
3390 {
3391 printf("** Failed to get %d bytes of memory for offsets vector\n",
3392 (int)(size_offsets_max * sizeof(int)));
3393 yield = 1;
3394 goto EXIT;
3395 }
3396
3397 /* Sort out the input and output files */
3398
3399 if (argc > 1)
3400 {
3401 infile = fopen(argv[op], INPUT_MODE);
3402 if (infile == NULL)
3403 {
3404 printf("** Failed to open %s\n", argv[op]);
3405 yield = 1;
3406 goto EXIT;
3407 }
3408 }
3409
3410 if (argc > 2)
3411 {
3412 outfile = fopen(argv[op+1], OUTPUT_MODE);
3413 if (outfile == NULL)
3414 {
3415 printf("** Failed to open %s\n", argv[op+1]);
3416 yield = 1;
3417 goto EXIT;
3418 }
3419 }
3420
3421 /* Set alternative malloc function */
3422
3423 #ifdef SUPPORT_PCRE8
3424 pcre_malloc = new_malloc;
3425 pcre_free = new_free;
3426 pcre_stack_malloc = stack_malloc;
3427 pcre_stack_free = stack_free;
3428 #endif
3429
3430 #ifdef SUPPORT_PCRE16
3431 pcre16_malloc = new_malloc;
3432 pcre16_free = new_free;
3433 pcre16_stack_malloc = stack_malloc;
3434 pcre16_stack_free = stack_free;
3435 #endif
3436
3437 #ifdef SUPPORT_PCRE32
3438 pcre32_malloc = new_malloc;
3439 pcre32_free = new_free;
3440 pcre32_stack_malloc = stack_malloc;
3441 pcre32_stack_free = stack_free;
3442 #endif
3443
3444 /* Heading line unless quiet */
3445
3446 if (!quiet) fprintf(outfile, "PCRE version %s\n\n", version);
3447
3448 /* Main loop */
3449
3450 while (!done)
3451 {
3452 pcre *re = NULL;
3453 pcre_extra *extra = NULL;
3454
3455 #if !defined NOPOSIX /* There are still compilers that require no indent */
3456 regex_t preg;
3457 int do_posix = 0;
3458 #endif
3459
3460 const char *error;
3461 pcre_uint8 *markptr;
3462 pcre_uint8 *p, *pp, *ppp;
3463 pcre_uint8 *to_file = NULL;
3464 const pcre_uint8 *tables = NULL;
3465 unsigned long int get_options;
3466 unsigned long int true_size, true_study_size = 0;
3467 size_t size;
3468 int do_allcaps = 0;
3469 int do_mark = 0;
3470 int do_study = 0;
3471 int no_force_study = 0;
3472 int do_debug = debug;
3473 int do_G = 0;
3474 int do_g = 0;
3475 int do_showinfo = showinfo;
3476 int do_showrest = 0;
3477 int do_showcaprest = 0;
3478 int do_flip = 0;
3479 int erroroffset, len, delimiter, poffset;
3480
3481 #if !defined NODFA
3482 int dfa_matched = 0;
3483 #endif
3484
3485 use_utf = 0;
3486 debug_lengths = 1;
3487 SET_PCRE_STACK_GUARD(NULL);
3488
3489 if (extend_inputline(infile, buffer, " re> ") == NULL) break;
3490 if (infile != stdin) fprintf(outfile, "%s", (char *)buffer);
3491 fflush(outfile);
3492
3493 p = buffer;
3494 while (isspace(*p)) p++;
3495 if (*p == 0) continue;
3496
3497 /* Handle option lock-out setting */
3498
3499 if (*p == '<' && p[1] == ' ')
3500 {
3501 p += 2;
3502 while (isspace(*p)) p++;
3503 if (strncmp((char *)p, "forbid ", 7) == 0)
3504 {
3505 p += 7;
3506 while (isspace(*p)) p++;
3507 pp = lockout;
3508 while (!isspace(*p) && pp < lockout + sizeof(lockout) - 1)
3509 *pp++ = *p++;
3510 *pp = 0;
3511 }
3512 else
3513 {
3514 printf("** Unrecognized special command '%s'\n", p);
3515 yield = 1;
3516 goto EXIT;
3517 }
3518 continue;
3519 }
3520
3521 /* See if the pattern is to be loaded pre-compiled from a file. */
3522
3523 if (*p == '<' && strchr((char *)(p+1), '<') == NULL)
3524 {
3525 pcre_uint32 magic;
3526 pcre_uint8 sbuf[8];
3527 FILE *f;
3528
3529 p++;
3530 if (*p == '!')
3531 {
3532 do_debug = TRUE;
3533 do_showinfo = TRUE;
3534 p++;
3535 }
3536
3537 pp = p + (int)strlen((char *)p);
3538 while (isspace(pp[-1])) pp--;
3539 *pp = 0;
3540
3541 f = fopen((char *)p, "rb");
3542 if (f == NULL)
3543 {
3544 fprintf(outfile, "Failed to open %s: %s\n", p, strerror(errno));
3545 continue;
3546 }
3547 if (fread(sbuf, 1, 8, f) != 8) goto FAIL_READ;
3548
3549 true_size =
3550 (sbuf[0] << 24) | (sbuf[1] << 16) | (sbuf[2] << 8) | sbuf[3];
3551 true_study_size =
3552 (sbuf[4] << 24) | (sbuf[5] << 16) | (sbuf[6] << 8) | sbuf[7];
3553
3554 re = (pcre *)new_malloc(true_size);
3555 if (re == NULL)
3556 {
3557 printf("** Failed to get %d bytes of memory for pcre object\n",
3558 (int)true_size);
3559 yield = 1;
3560 goto EXIT;
3561 }
3562 if (fread(re, 1, true_size, f) != true_size) goto FAIL_READ;
3563
3564 magic = REAL_PCRE_MAGIC(re);
3565 if (magic != MAGIC_NUMBER)
3566 {
3567 if (swap_uint32(magic) == MAGIC_NUMBER)
3568 {
3569 do_flip = 1;
3570 }
3571 else
3572 {
3573 fprintf(outfile, "Data in %s is not a compiled PCRE regex\n", p);
3574 new_free(re);
3575 fclose(f);
3576 continue;
3577 }
3578 }
3579
3580 /* We hide the byte-invert info for little and big endian tests. */
3581 fprintf(outfile, "Compiled pattern%s loaded from %s\n",
3582 do_flip && (p[-1] == '<') ? " (byte-inverted)" : "", p);
3583
3584 /* Now see if there is any following study data. */
3585
3586 if (true_study_size != 0)
3587 {
3588 pcre_study_data *psd;
3589
3590 extra = (pcre_extra *)new_malloc(sizeof(pcre_extra) + true_study_size);
3591 extra->flags = PCRE_EXTRA_STUDY_DATA;
3592
3593 psd = (pcre_study_data *)(((char *)extra) + sizeof(pcre_extra));
3594 extra->study_data = psd;
3595
3596 if (fread(psd, 1, true_study_size, f) != true_study_size)
3597 {
3598 FAIL_READ:
3599 fprintf(outfile, "Failed to read data from %s\n", p);
3600 if (extra != NULL)
3601 {
3602 PCRE_FREE_STUDY(extra);
3603 }
3604 new_free(re);
3605 fclose(f);
3606 continue;
3607 }
3608 fprintf(outfile, "Study data loaded from %s\n", p);
3609 do_study = 1; /* To get the data output if requested */
3610 }
3611 else fprintf(outfile, "No study data\n");
3612
3613 /* Flip the necessary bytes. */
3614 if (do_flip)
3615 {
3616 int rc;
3617 PCRE_PATTERN_TO_HOST_BYTE_ORDER(rc, re, extra, NULL);
3618 if (rc == PCRE_ERROR_BADMODE)
3619 {
3620 pcre_uint32 flags_in_host_byte_order;
3621 if (REAL_PCRE_MAGIC(re) == MAGIC_NUMBER)
3622 flags_in_host_byte_order = REAL_PCRE_FLAGS(re);
3623 else
3624 flags_in_host_byte_order = swap_uint32(REAL_PCRE_FLAGS(re));
3625 /* Simulate the result of the function call below. */
3626 fprintf(outfile, "Error %d from pcre%s_fullinfo(%d)\n", rc,
3627 pcre_mode == PCRE32_MODE ? "32" : pcre_mode == PCRE16_MODE ? "16" : "",
3628 PCRE_INFO_OPTIONS);
3629 fprintf(outfile, "Running in %d-bit mode but pattern was compiled in "
3630 "%d-bit mode\n", 8 * CHAR_SIZE, 8 * (flags_in_host_byte_order & PCRE_MODE_MASK));
3631 new_free(re);
3632 fclose(f);
3633 continue;
3634 }
3635 }
3636
3637 /* Need to know if UTF-8 for printing data strings. */
3638
3639 if (new_info(re, NULL, PCRE_INFO_OPTIONS, &get_options) < 0)
3640 {
3641 new_free(re);
3642 fclose(f);
3643 continue;
3644 }
3645 use_utf = (get_options & PCRE_UTF8) != 0;
3646
3647 fclose(f);
3648 goto SHOW_INFO;
3649 }
3650
3651 /* In-line pattern (the usual case). Get the delimiter and seek the end of
3652 the pattern; if it isn't complete, read more. */
3653
3654 delimiter = *p++;
3655
3656 if (isalnum(delimiter) || delimiter == '\\')
3657 {
3658 fprintf(outfile, "** Delimiter must not be alphanumeric or \\\n");
3659 goto SKIP_DATA;
3660 }
3661
3662 pp = p;
3663 poffset = (int)(p - buffer);
3664
3665 for(;;)
3666 {
3667 while (*pp != 0)
3668 {
3669 if (*pp == '\\' && pp[1] != 0) pp++;
3670 else if (*pp == delimiter) break;
3671 pp++;
3672 }
3673 if (*pp != 0) break;
3674 if ((pp = extend_inputline(infile, pp, " > ")) == NULL)
3675 {
3676 fprintf(outfile, "** Unexpected EOF\n");
3677 done = 1;
3678 goto CONTINUE;
3679 }
3680 if (infile != stdin) fprintf(outfile, "%s", (char *)pp);
3681 }
3682
3683 /* The buffer may have moved while being extended; reset the start of data
3684 pointer to the correct relative point in the buffer. */
3685
3686 p = buffer + poffset;
3687
3688 /* If the first character after the delimiter is backslash, make
3689 the pattern end with backslash. This is purely to provide a way
3690 of testing for the error message when a pattern ends with backslash. */
3691
3692 if (pp[1] == '\\') *pp++ = '\\';
3693
3694 /* Terminate the pattern at the delimiter, and save a copy of the pattern
3695 for callouts. */
3696
3697 *pp++ = 0;
3698 strcpy((char *)pbuffer, (char *)p);
3699
3700 /* Look for modifiers and options after the final delimiter. */
3701
3702 options = default_options;
3703 study_options = force_study_options;
3704 log_store = showstore; /* default from command line */
3705
3706 while (*pp != 0)
3707 {
3708 /* Check to see whether this modifier has been locked out for this file.
3709 This is complicated for the multi-character options that begin with '<'.
3710 If there is no '>' in the lockout string, all multi-character modifiers are
3711 locked out. */
3712
3713 if (strchr((char *)lockout, *pp) != NULL)
3714 {
3715 if (*pp == '<' && strchr((char *)lockout, '>') != NULL)
3716 {
3717 int x = check_mc_option(pp+1, outfile, FALSE, "modifier");
3718 if (x == 0) goto SKIP_DATA;
3719
3720 for (ppp = lockout; *ppp != 0; ppp++)
3721 {
3722 if (*ppp == '<')
3723 {
3724 int y = check_mc_option(ppp+1, outfile, FALSE, "modifier");
3725 if (y == 0)
3726 {
3727 printf("** Error in modifier forbid data - giving up.\n");
3728 yield = 1;
3729 goto EXIT;
3730 }
3731 if (x == y)
3732 {
3733 ppp = pp;
3734 while (*ppp != '>') ppp++;
3735 printf("** The %.*s modifier is locked out - giving up.\n",
3736 (int)(ppp - pp + 1), pp);
3737 yield = 1;
3738 goto EXIT;
3739 }
3740 }
3741 }
3742 }
3743
3744 /* The single-character modifiers are straightforward. */
3745
3746 else
3747 {
3748 printf("** The /%c modifier is locked out - giving up.\n", *pp);
3749 yield = 1;
3750 goto EXIT;
3751 }
3752 }
3753
3754 /* The modifier is not locked out; handle it. */
3755
3756 switch (*pp++)
3757 {
3758 case 'f': options |= PCRE_FIRSTLINE; break;
3759 case 'g': do_g = 1; break;
3760 case 'i': options |= PCRE_CASELESS; break;
3761 case 'm': options |= PCRE_MULTILINE; break;
3762 case 's': options |= PCRE_DOTALL; break;
3763 case 'x': options |= PCRE_EXTENDED; break;
3764
3765 case '+':
3766 if (do_showrest) do_showcaprest = 1; else do_showrest = 1;
3767 break;
3768
3769 case '=': do_allcaps = 1; break;
3770 case 'A': options |= PCRE_ANCHORED; break;
3771 case 'B': do_debug = 1; break;
3772 case 'C': options |= PCRE_AUTO_CALLOUT; break;
3773 case 'D': do_debug = do_showinfo = 1; break;
3774 case 'E': options |= PCRE_DOLLAR_ENDONLY; break;
3775 case 'F': do_flip = 1; break;
3776 case 'G': do_G = 1; break;
3777 case 'I': do_showinfo = 1; break;
3778 case 'J': options |= PCRE_DUPNAMES; break;
3779 case 'K': do_mark = 1; break;
3780 case 'M': log_store = 1; break;
3781 case 'N': options |= PCRE_NO_AUTO_CAPTURE; break;
3782 case 'O': options |= PCRE_NO_AUTO_POSSESS; break;
3783
3784 #if !defined NOPOSIX
3785 case 'P': do_posix = 1; break;
3786 #endif
3787
3788 case 'Q':
3789 switch (*pp)
3790 {
3791 case '0':
3792 case '1':
3793 stack_guard_return = *pp++ - '0';
3794 break;
3795
3796 default:
3797 fprintf(outfile, "** Missing 0 or 1 after /Q\n");
3798 goto SKIP_DATA;
3799 }
3800 SET_PCRE_STACK_GUARD(stack_guard);
3801 break;
3802
3803 case 'S':
3804 do_study = 1;
3805 for (;;)
3806 {
3807 switch (*pp++)
3808 {
3809 case 'S':
3810 do_study = 0;
3811 no_force_study = 1;
3812 break;
3813
3814 case '!':
3815 study_options |= PCRE_STUDY_EXTRA_NEEDED;
3816 break;
3817
3818 case '+':
3819 if (*pp == '+')
3820 {
3821 verify_jit = TRUE;
3822 pp++;
3823 }
3824 if (*pp >= '1' && *pp <= '7')
3825 study_options |= jit_study_bits[*pp++ - '1'];
3826 else
3827 study_options |= jit_study_bits[6];
3828 break;
3829
3830 case '-':
3831 study_options &= ~PCRE_STUDY_ALLJIT;
3832 break;
3833
3834 default:
3835 pp--;
3836 goto ENDLOOP;
3837 }
3838 }
3839 ENDLOOP:
3840 break;
3841
3842 case 'U': options |= PCRE_UNGREEDY; break;
3843 case 'W': options |= PCRE_UCP; break;
3844 case 'X': options |= PCRE_EXTRA; break;
3845 case 'Y': options |= PCRE_NO_START_OPTIMISE; break;
3846 case 'Z': debug_lengths = 0; break;
3847 case '8': options |= PCRE_UTF8; use_utf = 1; break;
3848 case '9': options |= PCRE_NEVER_UTF; break;
3849 case '?': options |= PCRE_NO_UTF8_CHECK; break;
3850
3851 case 'T':
3852 switch (*pp++)
3853 {
3854 case '0': tables = tables0; break;
3855 case '1': tables = tables1; break;
3856
3857 case '\r':
3858 case '\n':
3859 case ' ':
3860 case 0:
3861 fprintf(outfile, "** Missing table number after /T\n");
3862 goto SKIP_DATA;
3863
3864 default:
3865 fprintf(outfile, "** Bad table number \"%c\" after /T\n", pp[-1]);
3866 goto SKIP_DATA;
3867 }
3868 break;
3869
3870 case 'L':
3871 ppp = pp;
3872 /* The '\r' test here is so that it works on Windows. */
3873 /* The '0' test is just in case this is an unterminated line. */
3874 while (*ppp != 0 && *ppp != '\n' && *ppp != '\r' && *ppp != ' ') ppp++;
3875 *ppp = 0;
3876 if (setlocale(LC_CTYPE, (const char *)pp) == NULL)
3877 {
3878 fprintf(outfile, "** Failed to set locale \"%s\"\n", pp);
3879 goto SKIP_DATA;
3880 }
3881 locale_set = 1;
3882 tables = PCRE_MAKETABLES;
3883 pp = ppp;
3884 break;
3885
3886 case '>':
3887 to_file = pp;
3888 while (*pp != 0) pp++;
3889 while (isspace(pp[-1])) pp--;
3890 *pp = 0;
3891 break;
3892
3893 case '<':
3894 {
3895 int x = check_mc_option(pp, outfile, FALSE, "modifier");
3896 if (x == 0) goto SKIP_DATA;
3897 options |= x;
3898 while (*pp++ != '>');
3899 }
3900 break;
3901
3902 case '\r': /* So that it works in Windows */
3903 case '\n':
3904 case ' ':
3905 break;
3906
3907 default:
3908 fprintf(outfile, "** Unknown modifier '%c'\n", pp[-1]);
3909 goto SKIP_DATA;
3910 }
3911 }
3912
3913 /* Handle compiling via the POSIX interface, which doesn't support the
3914 timing, showing, or debugging options, nor the ability to pass over
3915 local character tables. Neither does it have 16-bit support. */
3916
3917 #if !defined NOPOSIX
3918 if (posix || do_posix)
3919 {
3920 int rc;
3921 int cflags = 0;
3922
3923 if ((options & PCRE_CASELESS) != 0) cflags |= REG_ICASE;
3924 if ((options & PCRE_MULTILINE) != 0) cflags |= REG_NEWLINE;
3925 if ((options & PCRE_DOTALL) != 0) cflags |= REG_DOTALL;
3926 if ((options & PCRE_NO_AUTO_CAPTURE) != 0) cflags |= REG_NOSUB;
3927 if ((options & PCRE_UTF8) != 0) cflags |= REG_UTF8;
3928 if ((options & PCRE_UCP) != 0) cflags |= REG_UCP;
3929 if ((options & PCRE_UNGREEDY) != 0) cflags |= REG_UNGREEDY;
3930
3931 rc = regcomp(&preg, (char *)p, cflags);
3932
3933 /* Compilation failed; go back for another re, skipping to blank line
3934 if non-interactive. */
3935
3936 if (rc != 0)
3937 {
3938 (void)regerror(rc, &preg, (char *)buffer, buffer_size);
3939 fprintf(outfile, "Failed: POSIX code %d: %s\n", rc, buffer);
3940 goto SKIP_DATA;
3941 }
3942 }
3943
3944 /* Handle compiling via the native interface */
3945
3946 else
3947 #endif /* !defined NOPOSIX */
3948
3949 {
3950 /* In 16- or 32-bit mode, convert the input. */
3951
3952 #ifdef SUPPORT_PCRE16
3953 if (pcre_mode == PCRE16_MODE)
3954 {
3955 switch(to16(FALSE, p, options & PCRE_UTF8, (int)strlen((char *)p)))
3956 {
3957 case -1:
3958 fprintf(outfile, "**Failed: invalid UTF-8 string cannot be "
3959 "converted to UTF-16\n");
3960 goto SKIP_DATA;
3961
3962 case -2:
3963 fprintf(outfile, "**Failed: character value greater than 0x10ffff "
3964 "cannot be converted to UTF-16\n");
3965 goto SKIP_DATA;
3966
3967 case -3: /* "Impossible error" when to16 is called arg1 FALSE */
3968 fprintf(outfile, "**Failed: character value greater than 0xffff "
3969 "cannot be converted to 16-bit in non-UTF mode\n");
3970 goto SKIP_DATA;
3971
3972 default:
3973 break;
3974 }
3975 p = (pcre_uint8 *)buffer16;
3976 }
3977 #endif
3978
3979 #ifdef SUPPORT_PCRE32
3980 if (pcre_mode == PCRE32_MODE)
3981 {
3982 switch(to32(FALSE, p, options & PCRE_UTF32, (int)strlen((char *)p)))
3983 {
3984 case -1:
3985 fprintf(outfile, "**Failed: invalid UTF-8 string cannot be "
3986 "converted to UTF-32\n");
3987 goto SKIP_DATA;
3988
3989 case -2:
3990 fprintf(outfile, "**Failed: character value greater than 0x10ffff "
3991 "cannot be converted to UTF-32\n");
3992 goto SKIP_DATA;
3993
3994 case -3:
3995 fprintf(outfile, "**Failed: character value is ill-formed UTF-32\n");
3996 goto SKIP_DATA;
3997
3998 default:
3999 break;
4000 }
4001 p = (pcre_uint8 *)buffer32;
4002 }
4003 #endif
4004
4005 /* Compile many times when timing */
4006
4007 if (timeit > 0)
4008 {
4009 register int i;
4010 clock_t time_taken;
4011 clock_t start_time = clock();
4012 for (i = 0; i < timeit; i++)
4013 {
4014 PCRE_COMPILE(re, p, options, &error, &erroroffset, tables);
4015 if (re != NULL) free(re);
4016 }
4017 total_compile_time += (time_taken = clock() - start_time);
4018 fprintf(outfile, "Compile time %.4f milliseconds\n",
4019 (((double)time_taken * 1000.0) / (double)timeit) /
4020 (double)CLOCKS_PER_SEC);
4021 }
4022
4023 PCRE_COMPILE(re, p, options, &error, &erroroffset, tables);
4024
4025 /* Compilation failed; go back for another re, skipping to blank line
4026 if non-interactive. */
4027
4028 if (re == NULL)
4029 {
4030 fprintf(outfile, "Failed: %s at offset %d\n", error, erroroffset);
4031 SKIP_DATA:
4032 if (infile != stdin)
4033 {
4034 for (;;)
4035 {
4036 if (extend_inputline(infile, buffer, NULL) == NULL)
4037 {
4038 done = 1;
4039 goto CONTINUE;
4040 }
4041 len = (int)strlen((char *)buffer);
4042 while (len > 0 && isspace(buffer[len-1])) len--;
4043 if (len == 0) break;
4044 }
4045 fprintf(outfile, "\n");
4046 }
4047 goto CONTINUE;
4048 }
4049
4050 /* Compilation succeeded. It is now possible to set the UTF-8 option from
4051 within the regex; check for this so that we know how to process the data
4052 lines. */
4053
4054 if (new_info(re, NULL, PCRE_INFO_OPTIONS, &get_options) < 0)
4055 goto SKIP_DATA;
4056 if ((get_options & PCRE_UTF8) != 0) use_utf = 1;
4057
4058 /* Extract the size for possible writing before possibly flipping it,
4059 and remember the store that was got. */
4060
4061 true_size = REAL_PCRE_SIZE(re);
4062
4063 /* Output code size information if requested */
4064
4065 if (log_store)
4066 {
4067 int name_count, name_entry_size, real_pcre_size;
4068
4069 new_info(re, NULL, PCRE_INFO_NAMECOUNT, &name_count);
4070 new_info(re, NULL, PCRE_INFO_NAMEENTRYSIZE, &name_entry_size);
4071 real_pcre_size = 0;
4072 #ifdef SUPPORT_PCRE8
4073 if (REAL_PCRE_FLAGS(re) & PCRE_MODE8)
4074 real_pcre_size = sizeof(real_pcre);
4075 #endif
4076 #ifdef SUPPORT_PCRE16
4077 if (REAL_PCRE_FLAGS(re) & PCRE_MODE16)
4078 real_pcre_size = sizeof(real_pcre16);
4079 #endif
4080 #ifdef SUPPORT_PCRE32
4081 if (REAL_PCRE_FLAGS(re) & PCRE_MODE32)
4082 real_pcre_size = sizeof(real_pcre32);
4083 #endif
4084 new_info(re, NULL, PCRE_INFO_SIZE, &size);
4085 fprintf(outfile, "Memory allocation (code space): %d\n",
4086 (int)(size - real_pcre_size - name_count * name_entry_size));
4087 }
4088
4089 /* If -s or /S was present, study the regex to generate additional info to
4090 help with the matching, unless the pattern has the SS option, which
4091 suppresses the effect of /S (used for a few test patterns where studying is
4092 never sensible). */
4093
4094 if (do_study || (force_study >= 0 && !no_force_study))
4095 {
4096 if (timeit > 0)
4097 {
4098 register int i;
4099 clock_t time_taken;
4100 clock_t start_time = clock();
4101 for (i = 0; i < timeit; i++)
4102 {
4103 PCRE_STUDY(extra, re, study_options, &error);
4104 }
4105 total_study_time = (time_taken = clock() - start_time);
4106 if (extra != NULL)
4107 {
4108 PCRE_FREE_STUDY(extra);
4109 }
4110 fprintf(outfile, " Study time %.4f milliseconds\n",
4111 (((double)time_taken * 1000.0) / (double)timeit) /
4112 (double)CLOCKS_PER_SEC);
4113 }
4114 PCRE_STUDY(extra, re, study_options, &error);
4115 if (error != NULL)
4116 fprintf(outfile, "Failed to study: %s\n", error);
4117 else if (extra != NULL)
4118 {
4119 true_study_size = ((pcre_study_data *)(extra->study_data))->size;
4120 if (log_store)
4121 {
4122 size_t jitsize;
4123 if (new_info(re, extra, PCRE_INFO_JITSIZE, &jitsize) == 0 &&
4124 jitsize != 0)
4125 fprintf(outfile, "Memory allocation (JIT code): %d\n", (int)jitsize);
4126 }
4127 }
4128 }
4129
4130 /* If /K was present, we set up for handling MARK data. */
4131
4132 if (do_mark)
4133 {
4134 if (extra == NULL)
4135 {
4136 extra = (pcre_extra *)malloc(sizeof(pcre_extra));
4137 extra->flags = 0;
4138 }
4139 extra->mark = &markptr;
4140 extra->flags |= PCRE_EXTRA_MARK;
4141 }
4142
4143 /* Extract and display information from the compiled data if required. */
4144
4145 SHOW_INFO:
4146
4147 if (do_debug)
4148 {
4149 fprintf(outfile, "------------------------------------------------------------------\n");
4150 PCRE_PRINTINT(re, outfile, debug_lengths);
4151 }
4152
4153 /* We already have the options in get_options (see above) */
4154
4155 if (do_showinfo)
4156 {
4157 unsigned long int all_options;
4158 pcre_uint32 first_char, need_char;
4159 pcre_uint32 match_limit, recursion_limit;
4160 int count, backrefmax, first_char_set, need_char_set, okpartial, jchanged,
4161 hascrorlf, maxlookbehind, match_empty;
4162 int nameentrysize, namecount;
4163 const pcre_uint8 *nametable;
4164
4165 if (new_info(re, NULL, PCRE_INFO_CAPTURECOUNT, &count) +
4166 new_info(re, NULL, PCRE_INFO_BACKREFMAX, &backrefmax) +
4167 new_info(re, NULL, PCRE_INFO_FIRSTCHARACTER, &first_char) +
4168 new_info(re, NULL, PCRE_INFO_FIRSTCHARACTERFLAGS, &first_char_set) +
4169 new_info(re, NULL, PCRE_INFO_REQUIREDCHAR, &need_char) +
4170 new_info(re, NULL, PCRE_INFO_REQUIREDCHARFLAGS, &need_char_set) +
4171 new_info(re, NULL, PCRE_INFO_NAMEENTRYSIZE, &nameentrysize) +
4172 new_info(re, NULL, PCRE_INFO_NAMECOUNT, &namecount) +
4173 new_info(re, NULL, PCRE_INFO_NAMETABLE, (void *)&nametable) +
4174 new_info(re, NULL, PCRE_INFO_OKPARTIAL, &okpartial) +
4175 new_info(re, NULL, PCRE_INFO_JCHANGED, &jchanged) +
4176 new_info(re, NULL, PCRE_INFO_HASCRORLF, &hascrorlf) +
4177 new_info(re, NULL, PCRE_INFO_MATCH_EMPTY, &match_empty) +
4178 new_info(re, NULL, PCRE_INFO_MAXLOOKBEHIND, &maxlookbehind)
4179 != 0)
4180 goto SKIP_DATA;
4181
4182 fprintf(outfile, "Capturing subpattern count = %d\n", count);
4183
4184 if (backrefmax > 0)
4185 fprintf(outfile, "Max back reference = %d\n", backrefmax);
4186
4187 if (maxlookbehind > 0)
4188 fprintf(outfile, "Max lookbehind = %d\n", maxlookbehind);
4189
4190 if (new_info(re, NULL, PCRE_INFO_MATCHLIMIT, &match_limit) == 0)
4191 fprintf(outfile, "Match limit = %u\n", match_limit);
4192
4193 if (new_info(re, NULL, PCRE_INFO_RECURSIONLIMIT, &recursion_limit) == 0)
4194 fprintf(outfile, "Recursion limit = %u\n", recursion_limit);
4195
4196 if (namecount > 0)
4197 {
4198 fprintf(outfile, "Named capturing subpatterns:\n");
4199 while (namecount-- > 0)
4200 {
4201 int imm2_size = pcre_mode == PCRE8_MODE ? 2 : 1;
4202 int length = (int)STRLEN(nametable + imm2_size);
4203 fprintf(outfile, " ");
4204 PCHARSV(nametable, imm2_size, length, outfile);
4205 while (length++ < nameentrysize - imm2_size) putc(' ', outfile);
4206 #ifdef SUPPORT_PCRE32
4207 if (pcre_mode == PCRE32_MODE)
4208 fprintf(outfile, "%3d\n", (int)(((PCRE_SPTR32)nametable)[0]));
4209 #endif
4210 #ifdef SUPPORT_PCRE16
4211 if (pcre_mode == PCRE16_MODE)
4212 fprintf(outfile, "%3d\n", (int)(((PCRE_SPTR16)nametable)[0]));
4213 #endif
4214 #ifdef SUPPORT_PCRE8
4215 if (pcre_mode == PCRE8_MODE)
4216 fprintf(outfile, "%3d\n", ((int)nametable[0] << 8) | (int)nametable[1]);
4217 #endif
4218 nametable += nameentrysize * CHAR_SIZE;
4219 }
4220 }
4221
4222 if (!okpartial) fprintf(outfile, "Partial matching not supported\n");
4223 if (hascrorlf) fprintf(outfile, "Contains explicit CR or LF match\n");
4224 if (match_empty) fprintf(outfile, "May match empty string\n");
4225
4226 all_options = REAL_PCRE_OPTIONS(re);
4227 if (do_flip) all_options = swap_uint32(all_options);
4228
4229 if (get_options == 0) fprintf(outfile, "No options\n");
4230 else fprintf(outfile, "Options:%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
4231 ((get_options & PCRE_ANCHORED) != 0)? " anchored" : "",
4232 ((get_options & PCRE_CASELESS) != 0)? " caseless" : "",
4233 ((get_options & PCRE_EXTENDED) != 0)? " extended" : "",
4234 ((get_options & PCRE_MULTILINE) != 0)? " multiline" : "",
4235 ((get_options & PCRE_FIRSTLINE) != 0)? " firstline" : "",
4236 ((get_options & PCRE_DOTALL) != 0)? " dotall" : "",
4237 ((get_options & PCRE_BSR_ANYCRLF) != 0)? " bsr_anycrlf" : "",
4238 ((get_options & PCRE_BSR_UNICODE) != 0)? " bsr_unicode" : "",
4239 ((get_options & PCRE_DOLLAR_ENDONLY) != 0)? " dollar_endonly" : "",
4240 ((get_options & PCRE_EXTRA) != 0)? " extra" : "",
4241 ((get_options & PCRE_UNGREEDY) != 0)? " ungreedy" : "",
4242 ((get_options & PCRE_NO_AUTO_CAPTURE) != 0)? " no_auto_capture" : "",
4243 ((get_options & PCRE_NO_AUTO_POSSESS) != 0)? " no_auto_possessify" : "",
4244 ((get_options & PCRE_UTF8) != 0)? " utf" : "",
4245 ((get_options & PCRE_UCP) != 0)? " ucp" : "",
4246 ((get_options & PCRE_NO_UTF8_CHECK) != 0)? " no_utf_check" : "",
4247 ((get_options & PCRE_NO_START_OPTIMIZE) != 0)? " no_start_optimize" : "",
4248 ((get_options & PCRE_DUPNAMES) != 0)? " dupnames" : "",
4249 ((get_options & PCRE_NEVER_UTF) != 0)? " never_utf" : "");
4250
4251 if (jchanged) fprintf(outfile, "Duplicate name status changes\n");
4252
4253 switch (get_options & PCRE_NEWLINE_BITS)
4254 {
4255 case PCRE_NEWLINE_CR:
4256 fprintf(outfile, "Forced newline sequence: CR\n");
4257 break;
4258
4259 case PCRE_NEWLINE_LF:
4260 fprintf(outfile, "Forced newline sequence: LF\n");
4261 break;
4262
4263 case PCRE_NEWLINE_CRLF:
4264 fprintf(outfile, "Forced newline sequence: CRLF\n");
4265 break;
4266
4267 case PCRE_NEWLINE_ANYCRLF:
4268 fprintf(outfile, "Forced newline sequence: ANYCRLF\n");
4269 break;
4270
4271 case PCRE_NEWLINE_ANY:
4272 fprintf(outfile, "Forced newline sequence: ANY\n");
4273 break;
4274
4275 default:
4276 break;
4277 }
4278
4279 if (first_char_set == 2)
4280 {
4281 fprintf(outfile, "First char at start or follows newline\n");
4282 }
4283 else if (first_char_set == 1)
4284 {
4285 const char *caseless =
4286 ((REAL_PCRE_FLAGS(re) & PCRE_FCH_CASELESS) == 0)?
4287 "" : " (caseless)";
4288
4289 if (PRINTOK(first_char))
4290 fprintf(outfile, "First char = \'%c\'%s\n", first_char, caseless);
4291 else
4292 {
4293 fprintf(outfile, "First char = ");
4294 pchar(first_char, outfile);
4295 fprintf(outfile, "%s\n", caseless);
4296 }
4297 }
4298 else
4299 {
4300 fprintf(outfile, "No first char\n");
4301 }
4302
4303 if (need_char_set == 0)
4304 {
4305 fprintf(outfile, "No need char\n");
4306 }
4307 else
4308 {
4309 const char *caseless =
4310 ((REAL_PCRE_FLAGS(re) & PCRE_RCH_CASELESS) == 0)?
4311 "" : " (caseless)";
4312
4313 if (PRINTOK(need_char))
4314 fprintf(outfile, "Need char = \'%c\'%s\n", need_char, caseless);
4315 else
4316 {
4317 fprintf(outfile, "Need char = ");
4318 pchar(need_char, outfile);
4319 fprintf(outfile, "%s\n", caseless);
4320 }
4321 }
4322
4323 /* Don't output study size; at present it is in any case a fixed
4324 value, but it varies, depending on the computer architecture, and
4325 so messes up the test suite. (And with the /F option, it might be
4326 flipped.) If study was forced by an external -s, don't show this
4327 information unless -i or -d was also present. This means that, except
4328 when auto-callouts are involved, the output from runs with and without
4329 -s should be identical. */
4330
4331 if (do_study || (force_study >= 0 && showinfo && !no_force_study))
4332 {
4333 if (extra == NULL)
4334 fprintf(outfile, "Study returned NULL\n");
4335 else
4336 {
4337 pcre_uint8 *start_bits = NULL;
4338 int minlength;
4339
4340 if (new_info(re, extra, PCRE_INFO_MINLENGTH, &minlength) == 0)
4341 fprintf(outfile, "Subject length lower bound = %d\n", minlength);
4342
4343 if (new_info(re, extra, PCRE_INFO_FIRSTTABLE, &start_bits) == 0)
4344 {
4345 if (start_bits == NULL)
4346 fprintf(outfile, "No starting char list\n");
4347 else
4348 {
4349 int i;
4350 int c = 24;
4351 fprintf(outfile, "Starting chars: ");
4352 for (i = 0; i < 256; i++)
4353 {
4354 if ((start_bits[i/8] & (1<<(i&7))) != 0)
4355 {
4356 if (c > 75)
4357 {
4358 fprintf(outfile, "\n ");
4359 c = 2;
4360 }
4361 if (PRINTOK(i) && i != ' ')
4362 {
4363 fprintf(outfile, "%c ", i);
4364 c += 2;
4365 }
4366 else
4367 {
4368 fprintf(outfile, "\\x%02x ", i);
4369 c += 5;
4370 }
4371 }
4372 }
4373 fprintf(outfile, "\n");
4374 }
4375 }
4376 }
4377
4378 /* Show this only if the JIT was set by /S, not by -s. */
4379
4380 if ((study_options & PCRE_STUDY_ALLJIT) != 0 &&
4381 (force_study_options & PCRE_STUDY_ALLJIT) == 0)
4382 {
4383 int jit;
4384 if (new_info(re, extra, PCRE_INFO_JIT, &jit) == 0)
4385 {
4386 if (jit)
4387 fprintf(outfile, "JIT study was successful\n");
4388 else
4389 #ifdef SUPPORT_JIT
4390 fprintf(outfile, "JIT study was not successful\n");
4391 #else
4392 fprintf(outfile, "JIT support is not available in this version of PCRE\n");
4393 #endif
4394 }
4395 }
4396 }
4397 }
4398
4399 /* If the '>' option was present, we write out the regex to a file, and
4400 that is all. The first 8 bytes of the file are the regex length and then
4401 the study length, in big-endian order. */
4402
4403 if (to_file != NULL)
4404 {
4405 FILE *f = fopen((char *)to_file, "wb");
4406 if (f == NULL)
4407 {
4408 fprintf(outfile, "Unable to open %s: %s\n", to_file, strerror(errno));
4409 }
4410 else
4411 {
4412 pcre_uint8 sbuf[8];
4413
4414 if (do_flip) regexflip(re, extra);
4415 sbuf[0] = (pcre_uint8)((true_size >> 24) & 255);
4416 sbuf[1] = (pcre_uint8)((true_size >> 16) & 255);
4417 sbuf[2] = (pcre_uint8)((true_size >> 8) & 255);
4418 sbuf[3] = (pcre_uint8)((true_size) & 255);
4419 sbuf[4] = (pcre_uint8)((true_study_size >> 24) & 255);
4420 sbuf[5] = (pcre_uint8)((true_study_size >> 16) & 255);
4421 sbuf[6] = (pcre_uint8)((true_study_size >> 8) & 255);
4422 sbuf[7] = (pcre_uint8)((true_study_size) & 255);
4423
4424 if (fwrite(sbuf, 1, 8, f) < 8 ||
4425 fwrite(re, 1, true_size, f) < true_size)
4426 {
4427 fprintf(outfile, "Write error on %s: %s\n", to_file, strerror(errno));
4428 }
4429 else
4430 {
4431 fprintf(outfile, "Compiled pattern written to %s\n", to_file);
4432
4433 /* If there is study data, write it. */
4434
4435 if (extra != NULL)
4436 {
4437 if (fwrite(extra->study_data, 1, true_study_size, f) <
4438 true_study_size)
4439 {
4440 fprintf(outfile, "Write error on %s: %s\n", to_file,
4441 strerror(errno));
4442 }
4443 else fprintf(outfile, "Study data written to %s\n", to_file);
4444 }
4445 }
4446 fclose(f);
4447 }
4448
4449 new_free(re);
4450 if (extra != NULL)
4451 {
4452 PCRE_FREE_STUDY(extra);
4453 }
4454 if (locale_set)
4455 {
4456 new_free((void *)tables);
4457 setlocale(LC_CTYPE, "C");
4458 locale_set = 0;
4459 }
4460 continue; /* With next regex */
4461 }
4462 } /* End of non-POSIX compile */
4463
4464 /* Read data lines and test them */
4465
4466 for (;;)
4467 {
4468 #ifdef SUPPORT_PCRE8
4469 pcre_uint8 *q8;
4470 #endif
4471 #ifdef SUPPORT_PCRE16
4472 pcre_uint16 *q16;
4473 #endif
4474 #ifdef SUPPORT_PCRE32
4475 pcre_uint32 *q32;
4476 #endif
4477 pcre_uint8 *bptr;
4478 int *use_offsets = offsets;
4479 int use_size_offsets = size_offsets;
4480 int callout_data = 0;
4481 int callout_data_set = 0;
4482 int count;
4483 pcre_uint32 c;
4484 int copystrings = 0;
4485 int find_match_limit = default_find_match_limit;
4486 int getstrings = 0;
4487 int getlist = 0;
4488 int gmatched = 0;
4489 int start_offset = 0;
4490 int start_offset_sign = 1;
4491 int g_notempty = 0;
4492 int use_dfa = 0;
4493
4494 *copynames = 0;
4495 *getnames = 0;
4496
4497 #ifdef SUPPORT_PCRE32
4498 cn32ptr = copynames;
4499 gn32ptr = getnames;
4500 #endif
4501 #ifdef SUPPORT_PCRE16
4502 cn16ptr = copynames16;
4503 gn16ptr = getnames16;
4504 #endif
4505 #ifdef SUPPORT_PCRE8
4506 cn8ptr = copynames8;
4507 gn8ptr = getnames8;
4508 #endif
4509
4510 SET_PCRE_CALLOUT(callout);
4511 first_callout = 1;
4512 last_callout_mark = NULL;
4513 callout_extra = 0;
4514 callout_count = 0;
4515 callout_fail_count = 999999;
4516 callout_fail_id = -1;
4517 show_malloc = 0;
4518 options = 0;
4519
4520 if (extra != NULL) extra->flags &=
4521 ~(PCRE_EXTRA_MATCH_LIMIT|PCRE_EXTRA_MATCH_LIMIT_RECURSION);
4522
4523 len = 0;
4524 for (;;)
4525 {
4526 if (extend_inputline(infile, buffer + len, "data> ") == NULL)
4527 {
4528 if (len > 0) /* Reached EOF without hitting a newline */
4529 {
4530 fprintf(outfile, "\n");
4531 break;
4532 }
4533 done = 1;
4534 goto CONTINUE;
4535 }
4536 if (infile != stdin) fprintf(outfile, "%s", (char *)buffer);
4537 len = (int)strlen((char *)buffer);
4538 if (buffer[len-1] == '\n') break;
4539 }
4540
4541 while (len > 0 && isspace(buffer[len-1])) len--;
4542 buffer[len] = 0;
4543 if (len == 0) break;
4544
4545 p = buffer;
4546 while (isspace(*p)) p++;
4547
4548 #ifndef NOUTF
4549 /* Check that the data is well-formed UTF-8 if we're in UTF mode. To create
4550 invalid input to pcre_exec, you must use \x?? or \x{} sequences. */
4551
4552 if (use_utf)
4553 {
4554 pcre_uint8 *q;
4555 pcre_uint32 cc;
4556 int n = 1;
4557
4558 for (q = p; n > 0 && *q; q += n) n = utf82ord(q, &cc);
4559 if (n <= 0)
4560 {
4561 fprintf(outfile, "**Failed: invalid UTF-8 string cannot be used as input in UTF mode\n");
4562 goto NEXT_DATA;
4563 }
4564 }
4565 #endif
4566
4567 #ifdef SUPPORT_VALGRIND
4568 /* Mark the dbuffer as addressable but undefined again. */
4569
4570 if (dbuffer != NULL)
4571 {
4572 VALGRIND_MAKE_MEM_UNDEFINED(dbuffer, dbuffer_size * CHAR_SIZE);
4573 }
4574 #endif
4575
4576 /* Allocate a buffer to hold the data line; len+1 is an upper bound on
4577 the number of pcre_uchar units that will be needed. */
4578
4579 while (dbuffer == NULL || (size_t)len >= dbuffer_size)
4580 {
4581 dbuffer_size *= 2;
4582 dbuffer = (pcre_uint8 *)realloc(dbuffer, dbuffer_size * CHAR_SIZE);
4583 if (dbuffer == NULL)
4584 {
4585 fprintf(stderr, "pcretest: realloc(%d) failed\n", (int)dbuffer_size);
4586 exit(1);
4587 }
4588 }
4589
4590 #ifdef SUPPORT_PCRE8
4591 q8 = (pcre_uint8 *) dbuffer;
4592 #endif
4593 #ifdef SUPPORT_PCRE16
4594 q16 = (pcre_uint16 *) dbuffer;
4595 #endif
4596 #ifdef SUPPORT_PCRE32
4597 q32 = (pcre_uint32 *) dbuffer;
4598 #endif
4599
4600 while ((c = *p++) != 0)
4601 {
4602 int i = 0;
4603 int n = 0;
4604
4605 /* In UTF mode, input can be UTF-8, so just copy all non-backslash bytes.
4606 In non-UTF mode, allow the value of the byte to fall through to later,
4607 where values greater than 127 are turned into UTF-8 when running in
4608 16-bit or 32-bit mode. */
4609
4610 if (c != '\\')
4611 {
4612 #ifndef NOUTF
4613 if (use_utf && HASUTF8EXTRALEN(c)) { GETUTF8INC(c, p); }
4614 #endif
4615 }
4616
4617 /* Handle backslash escapes */
4618
4619 else switch ((c = *p++))
4620 {
4621 case 'a': c = 7; break;
4622 case 'b': c = '\b'; break;
4623 case 'e': c = 27; break;
4624 case 'f': c = '\f'; break;
4625 case 'n': c = '\n'; break;
4626 case 'r': c = '\r'; break;
4627 case 't': c = '\t'; break;
4628 case 'v': c = '\v'; break;
4629
4630 case '0': case '1': case '2': case '3':
4631 case '4': case '5': case '6': case '7':
4632 c -= '0';
4633 while (i++ < 2 && isdigit(*p) && *p != '8' && *p != '9')
4634 c = c * 8 + *p++ - '0';
4635 break;
4636
4637 case 'o':
4638 if (*p == '{')
4639 {
4640 pcre_uint8 *pt = p;
4641 c = 0;
4642 for (pt++; isdigit(*pt) && *pt != '8' && *pt != '9'; pt++)
4643 {
4644 if (++i == 12)
4645 fprintf(outfile, "** Too many octal digits in \\o{...} item; "
4646 "using only the first twelve.\n");
4647 else c = c * 8 + *pt - '0';
4648 }
4649 if (*pt == '}') p = pt + 1;
4650 else fprintf(outfile, "** Missing } after \\o{ (assumed)\n");
4651 }
4652 break;
4653
4654 case 'x':
4655 if (*p == '{')
4656 {
4657 pcre_uint8 *pt = p;
4658 c = 0;
4659
4660 /* We used to have "while (isxdigit(*(++pt)))" here, but it fails
4661 when isxdigit() is a macro that refers to its argument more than
4662 once. This is banned by the C Standard, but apparently happens in at
4663 least one MacOS environment. */
4664
4665 for (pt++; isxdigit(*pt); pt++)
4666 {
4667 if (++i == 9)
4668 fprintf(outfile, "** Too many hex digits in \\x{...} item; "
4669 "using only the first eight.\n");
4670 else c = c * 16 + tolower(*pt) - ((isdigit(*pt))? '0' : 'a' - 10);
4671 }
4672 if (*pt == '}')
4673 {
4674 p = pt + 1;
4675 break;
4676 }
4677 /* Not correct form for \x{...}; fall through */
4678 }
4679
4680 /* \x without {} always defines just one byte in 8-bit mode. This
4681 allows UTF-8 characters to be constructed byte by byte, and also allows
4682 invalid UTF-8 sequences to be made. Just copy the byte in UTF mode.
4683 Otherwise, pass it down to later code so that it can be turned into
4684 UTF-8 when running in 16/32-bit mode. */
4685
4686 c = 0;
4687 while (i++ < 2 && isxdigit(*p))
4688 {
4689 c = c * 16 + tolower(*p) - ((isdigit(*p))? '0' : 'a' - 10);
4690 p++;
4691 }
4692 #if !defined NOUTF && defined SUPPORT_PCRE8
4693 if (use_utf && (pcre_mode == PCRE8_MODE))
4694 {
4695 *q8++ = c;
4696 continue;
4697 }
4698 #endif
4699 break;
4700
4701 case 0: /* \ followed by EOF allows for an empty line */
4702 p--;
4703 continue;
4704
4705 case '>':
4706 if (*p == '-')
4707 {
4708 start_offset_sign = -1;
4709 p++;
4710 }
4711 while(isdigit(*p)) start_offset = start_offset * 10 + *p++ - '0';
4712 start_offset *= start_offset_sign;
4713 continue;
4714
4715 case 'A': /* Option setting */
4716 options |= PCRE_ANCHORED;
4717 continue;
4718
4719 case 'B':
4720 options |= PCRE_NOTBOL;
4721 continue;
4722
4723 case 'C':
4724 if (isdigit(*p)) /* Set copy string */
4725 {
4726 while(isdigit(*p)) n = n * 10 + *p++ - '0';
4727 copystrings |= 1 << n;
4728 }
4729 else if (isalnum(*p))
4730 {
4731 READ_CAPTURE_NAME(p, &cn8ptr, &cn16ptr, &cn32ptr, re);
4732 }
4733 else if (*p == '+')
4734 {
4735 callout_extra = 1;
4736 p++;
4737 }
4738 else if (*p == '-')
4739 {
4740 SET_PCRE_CALLOUT(NULL);
4741 p++;
4742 }
4743 else if (*p == '!')
4744 {
4745 callout_fail_id = 0;
4746 p++;
4747 while(isdigit(*p))
4748 callout_fail_id = callout_fail_id * 10 + *p++ - '0';
4749 callout_fail_count = 0;
4750 if (*p == '!')
4751 {
4752 p++;
4753 while(isdigit(*p))
4754 callout_fail_count = callout_fail_count * 10 + *p++ - '0';
4755 }
4756 }
4757 else if (*p == '*')
4758 {
4759 int sign = 1;
4760 callout_data = 0;
4761 if (*(++p) == '-') { sign = -1; p++; }
4762 while(isdigit(*p))
4763 callout_data = callout_data * 10 + *p++ - '0';
4764 callout_data *= sign;
4765 callout_data_set = 1;
4766 }
4767 continue;
4768
4769 #if !defined NODFA
4770 case 'D':
4771 #if !defined NOPOSIX
4772 if (posix || do_posix)
4773 printf("** Can't use dfa matching in POSIX mode: \\D ignored\n");
4774 else
4775 #endif
4776 use_dfa = 1;
4777 continue;
4778 #endif
4779
4780 #if !defined NODFA
4781 case 'F':
4782 options |= PCRE_DFA_SHORTEST;
4783 continue;
4784 #endif
4785
4786 case 'G':
4787 if (isdigit(*p))
4788 {
4789 while(isdigit(*p)) n = n * 10 + *p++ - '0';
4790 getstrings |= 1 << n;
4791 }
4792 else if (isalnum(*p))
4793 {
4794 READ_CAPTURE_NAME(p, &gn8ptr, &gn16ptr, &gn32ptr, re);
4795 }
4796 continue;
4797
4798 case 'J':
4799 while(isdigit(*p)) n = n * 10 + *p++ - '0';
4800 if (extra != NULL
4801 && (extra->flags & PCRE_EXTRA_EXECUTABLE_JIT) != 0
4802 && extra->executable_jit != NULL)
4803 {
4804 if (jit_stack != NULL) { PCRE_JIT_STACK_FREE(jit_stack); }
4805 jit_stack = PCRE_JIT_STACK_ALLOC(1, n * 1024);
4806 PCRE_ASSIGN_JIT_STACK(extra, jit_callback, jit_stack);
4807 }
4808 continue;
4809
4810 case 'L':
4811 getlist = 1;
4812 continue;
4813
4814 case 'M':
4815 find_match_limit = 1;
4816 continue;
4817
4818 case 'N':
4819 if ((options & PCRE_NOTEMPTY) != 0)
4820 options = (options & ~PCRE_NOTEMPTY) | PCRE_NOTEMPTY_ATSTART;
4821 else
4822 options |= PCRE_NOTEMPTY;
4823 continue;
4824
4825 case 'O':
4826 while(isdigit(*p)) n = n * 10 + *p++ - '0';
4827 if (n > size_offsets_max)
4828 {
4829 size_offsets_max = n;
4830 free(offsets);
4831 use_offsets = offsets = (int *)malloc(size_offsets_max * sizeof(int));
4832 if (offsets == NULL)
4833 {
4834 printf("** Failed to get %d bytes of memory for offsets vector\n",
4835 (int)(size_offsets_max * sizeof(int)));
4836 yield = 1;
4837 goto EXIT;
4838 }
4839 }
4840 use_size_offsets = n;
4841 if (n == 0) use_offsets = NULL; /* Ensures it can't write to it */
4842 else use_offsets = offsets + size_offsets_max - n; /* To catch overruns */
4843 continue;
4844
4845 case 'P':
4846 options |= ((options & PCRE_PARTIAL_SOFT) == 0)?
4847 PCRE_PARTIAL_SOFT : PCRE_PARTIAL_HARD;
4848 continue;
4849
4850 case 'Q':
4851 while(isdigit(*p)) n = n * 10 + *p++ - '0';
4852 if (extra == NULL)
4853 {
4854 extra = (pcre_extra *)malloc(sizeof(pcre_extra));
4855 extra->flags = 0;
4856 }
4857 extra->flags |= PCRE_EXTRA_MATCH_LIMIT_RECURSION;
4858 extra->match_limit_recursion = n;
4859 continue;
4860
4861 case 'q':
4862 while(isdigit(*p)) n = n * 10 + *p++ - '0';
4863 if (extra == NULL)
4864 {
4865 extra = (pcre_extra *)malloc(sizeof(pcre_extra));
4866 extra->flags = 0;
4867 }
4868 extra->flags |= PCRE_EXTRA_MATCH_LIMIT;
4869 extra->match_limit = n;
4870 continue;
4871
4872 #if !defined NODFA
4873 case 'R':
4874 options |= PCRE_DFA_RESTART;
4875 continue;
4876 #endif
4877
4878 case 'S':
4879 show_malloc = 1;
4880 continue;
4881
4882 case 'Y':
4883 options |= PCRE_NO_START_OPTIMIZE;
4884 continue;
4885
4886 case 'Z':
4887 options |= PCRE_NOTEOL;
4888 continue;
4889
4890 case '?':
4891 options |= PCRE_NO_UTF8_CHECK;
4892 continue;
4893
4894 case '<':
4895 {
4896 int x = check_mc_option(p, outfile, TRUE, "escape sequence");
4897 if (x == 0) goto NEXT_DATA;
4898 options |= x;
4899 while (*p++ != '>');
4900 }
4901 continue;
4902 }
4903
4904 /* We now have a character value in c that may be greater than 255.
4905 In 8-bit mode we convert to UTF-8 if we are in UTF mode. Values greater
4906 than 127 in UTF mode must have come from \x{...} or octal constructs
4907 because values from \x.. get this far only in non-UTF mode. */
4908
4909 #ifdef SUPPORT_PCRE8
4910 if (pcre_mode == PCRE8_MODE)
4911 {
4912 #ifndef NOUTF
4913 if (use_utf)
4914 {
4915 if (c > 0x7fffffff)
4916 {
4917 fprintf(outfile, "** Character \\x{%x} is greater than 0x7fffffff "
4918 "and so cannot be converted to UTF-8\n", c);
4919 goto NEXT_DATA;
4920 }
4921 q8 += ord2utf8(c, q8);
4922 }
4923 else
4924 #endif
4925 {
4926 if (c > 0xffu)
4927 {
4928 fprintf(outfile, "** Character \\x{%x} is greater than 255 "
4929 "and UTF-8 mode is not enabled.\n", c);
4930 fprintf(outfile, "** Truncation will probably give the wrong "
4931 "result.\n");
4932 }
4933 *q8++ = c;
4934 }
4935 }
4936 #endif
4937 #ifdef SUPPORT_PCRE16
4938 if (pcre_mode == PCRE16_MODE)
4939 {
4940 #ifndef NOUTF
4941 if (use_utf)
4942 {
4943 if (c > 0x10ffffu)
4944 {
4945 fprintf(outfile, "** Failed: character \\x{%x} is greater than "
4946 "0x10ffff and so cannot be converted to UTF-16\n", c);
4947 goto NEXT_DATA;
4948 }
4949 else if (c >= 0x10000u)
4950 {
4951 c-= 0x10000u;
4952 *q16++ = 0xD800 | (c >> 10);
4953 *q16++ = 0xDC00 | (c & 0x3ff);
4954 }
4955 else
4956 *q16++ = c;
4957 }
4958 else
4959 #endif
4960 {
4961 if (c > 0xffffu)
4962 {
4963 fprintf(outfile, "** Character \\x{%x} is greater than 0xffff "
4964 "and UTF-16 mode is not enabled.\n", c);
4965 fprintf(outfile, "** Truncation will probably give the wrong "
4966 "result.\n");
4967 }
4968
4969 *q16++ = c;
4970 }
4971 }
4972 #endif
4973 #ifdef SUPPORT_PCRE32
4974 if (pcre_mode == PCRE32_MODE)
4975 {
4976 *q32++ = c;
4977 }
4978 #endif
4979
4980 }
4981
4982 /* Reached end of subject string */
4983
4984 #ifdef SUPPORT_PCRE8
4985 if (pcre_mode == PCRE8_MODE)
4986 {
4987 *q8 = 0;
4988 len = (int)(q8 - (pcre_uint8 *)dbuffer);
4989 }
4990 #endif
4991 #ifdef SUPPORT_PCRE16
4992 if (pcre_mode == PCRE16_MODE)
4993 {
4994 *q16 = 0;
4995 len = (int)(q16 - (pcre_uint16 *)dbuffer);
4996 }
4997 #endif
4998 #ifdef SUPPORT_PCRE32
4999 if (pcre_mode == PCRE32_MODE)
5000 {
5001 *q32 = 0;
5002 len = (int)(q32 - (pcre_uint32 *)dbuffer);
5003 }
5004 #endif
5005
5006 /* If we're compiling with explicit valgrind support, Mark the data from after
5007 its end to the end of the buffer as unaddressable, so that a read over the end
5008 of the buffer will be seen by valgrind, even if it doesn't cause a crash.
5009 If we're not building with valgrind support, at least move the data to the end
5010 of the buffer so that it might at least cause a crash.
5011 If we are using the POSIX interface, we must include the terminating zero. */
5012
5013 bptr = dbuffer;
5014
5015 #if !defined NOPOSIX
5016 if (posix || do_posix)
5017 {
5018 #ifdef SUPPORT_VALGRIND
5019 VALGRIND_MAKE_MEM_NOACCESS(dbuffer + len + 1, dbuffer_size - (len + 1));
5020 #else
5021 memmove(bptr + dbuffer_size - len - 1, bptr, len + 1);
5022 bptr += dbuffer_size - len - 1;
5023 #endif
5024 }
5025 else
5026 #endif
5027 {
5028 #ifdef SUPPORT_VALGRIND
5029 VALGRIND_MAKE_MEM_NOACCESS(dbuffer + len * CHAR_SIZE, (dbuffer_size - len) * CHAR_SIZE);
5030 #else
5031 bptr = memmove(bptr + (dbuffer_size - len) * CHAR_SIZE, bptr, len * CHAR_SIZE);
5032 #endif
5033 }
5034
5035 if ((all_use_dfa || use_dfa) && find_match_limit)
5036 {
5037 printf("**Match limit not relevant for DFA matching: ignored\n");
5038 find_match_limit = 0;
5039 }
5040
5041 /* Handle matching via the POSIX interface, which does not
5042 support timing or playing with the match limit or callout data. */
5043
5044 #if !defined NOPOSIX
5045 if (posix || do_posix)
5046 {
5047 int rc;
5048 int eflags = 0;
5049 regmatch_t *pmatch = NULL;
5050 if (use_size_offsets > 0)
5051 pmatch = (regmatch_t *)malloc(sizeof(regmatch_t) * use_size_offsets);
5052 if ((options & PCRE_NOTBOL) != 0) eflags |= REG_NOTBOL;
5053 if ((options & PCRE_NOTEOL) != 0) eflags |= REG_NOTEOL;
5054 if ((options & PCRE_NOTEMPTY) != 0) eflags |= REG_NOTEMPTY;
5055
5056 rc = regexec(&preg, (const char *)bptr, use_size_offsets, pmatch, eflags);
5057
5058 if (rc != 0)
5059 {
5060 (void)regerror(rc, &preg, (char *)buffer, buffer_size);
5061 fprintf(outfile, "No match: POSIX code %d: %s\n", rc, buffer);
5062 }
5063 else if ((REAL_PCRE_OPTIONS(preg.re_pcre) & PCRE_NO_AUTO_CAPTURE) != 0)
5064 {
5065 fprintf(outfile, "Matched with REG_NOSUB\n");
5066 }
5067 else
5068 {
5069 size_t i;
5070 for (i = 0; i < (size_t)use_size_offsets; i++)
5071 {
5072 if (pmatch[i].rm_so >= 0)
5073 {
5074 fprintf(outfile, "%2d: ", (int)i);
5075 PCHARSV(dbuffer, pmatch[i].rm_so,
5076 pmatch[i].rm_eo - pmatch[i].rm_so, outfile);
5077 fprintf(outfile, "\n");
5078 if (do_showcaprest || (i == 0 && do_showrest))
5079 {
5080 fprintf(outfile, "%2d+ ", (int)i);
5081 PCHARSV(dbuffer, pmatch[i].rm_eo, len - pmatch[i].rm_eo,
5082 outfile);
5083 fprintf(outfile, "\n");
5084 }
5085 }
5086 }
5087 }
5088 free(pmatch);
5089 goto NEXT_DATA;
5090 }
5091
5092 #endif /* !defined NOPOSIX */
5093
5094 /* Handle matching via the native interface - repeats for /g and /G */
5095
5096 /* Ensure that there is a JIT callback if we want to verify that JIT was
5097 actually used. If jit_stack == NULL, no stack has yet been assigned. */
5098
5099 if (verify_jit && jit_stack == NULL && extra != NULL)
5100 { PCRE_ASSIGN_JIT_STACK(extra, jit_callback, jit_stack); }
5101
5102 for (;; gmatched++) /* Loop for /g or /G */
5103 {
5104 markptr = NULL;
5105 jit_was_used = FALSE;
5106
5107 if (timeitm > 0)
5108 {
5109 register int i;
5110 clock_t time_taken;
5111 clock_t start_time = clock();
5112
5113 #if !defined NODFA
5114 if (all_use_dfa || use_dfa)
5115 {
5116 if ((options & PCRE_DFA_RESTART) != 0)
5117 {
5118 fprintf(outfile, "Timing DFA restarts is not supported\n");
5119 break;
5120 }
5121 if (dfa_workspace == NULL)
5122 dfa_workspace = (int *)malloc(DFA_WS_DIMENSION*sizeof(int));
5123 for (i = 0; i < timeitm; i++)
5124 {
5125 PCRE_DFA_EXEC(count, re, extra, bptr, len, start_offset,
5126 (options | g_notempty), use_offsets, use_size_offsets,
5127 dfa_workspace, DFA_WS_DIMENSION);
5128 }
5129 }
5130 else
5131 #endif
5132
5133 for (i = 0; i < timeitm; i++)
5134 {
5135 PCRE_EXEC(count, re, extra, bptr, len, start_offset,
5136 (options | g_notempty), use_offsets, use_size_offsets);
5137 }
5138 total_match_time += (time_taken = clock() - start_time);
5139 fprintf(outfile, "Execute time %.4f milliseconds\n",
5140 (((double)time_taken * 1000.0) / (double)timeitm) /
5141 (double)CLOCKS_PER_SEC);
5142 }
5143
5144 /* If find_match_limit is set, we want to do repeated matches with
5145 varying limits in order to find the minimum value for the match limit and
5146 for the recursion limit. The match limits are relevant only to the normal
5147 running of pcre_exec(), so disable the JIT optimization. This makes it
5148 possible to run the same set of tests with and without JIT externally
5149 requested. */
5150
5151 if (find_match_limit)
5152 {
5153 if (extra != NULL) { PCRE_FREE_STUDY(extra); }
5154 extra = (pcre_extra *)malloc(sizeof(pcre_extra));
5155 extra->flags = 0;
5156
5157 (void)check_match_limit(re, extra, bptr, len, start_offset,
5158 options|g_notempty, use_offsets, use_size_offsets,
5159 PCRE_EXTRA_MATCH_LIMIT, &(extra->match_limit),
5160 PCRE_ERROR_MATCHLIMIT, "match()");
5161
5162 count = check_match_limit(re, extra, bptr, len, start_offset,
5163 options|g_notempty, use_offsets, use_size_offsets,
5164 PCRE_EXTRA_MATCH_LIMIT_RECURSION, &(extra->match_limit_recursion),
5165 PCRE_ERROR_RECURSIONLIMIT, "match() recursion");
5166 }
5167
5168 /* If callout_data is set, use the interface with additional data */
5169
5170 else if (callout_data_set)
5171 {
5172 if (extra == NULL)
5173 {
5174 extra = (pcre_extra *)malloc(sizeof(pcre_extra));
5175 extra->flags = 0;
5176 }
5177 extra->flags |= PCRE_EXTRA_CALLOUT_DATA;
5178 extra->callout_data = &callout_data;
5179 PCRE_EXEC(count, re, extra, bptr, len, start_offset,
5180 options | g_notempty, use_offsets, use_size_offsets);
5181 extra->flags &= ~PCRE_EXTRA_CALLOUT_DATA;
5182 }
5183
5184 /* The normal case is just to do the match once, with the default
5185 value of match_limit. */
5186
5187 #if !defined NODFA
5188 else if (all_use_dfa || use_dfa)
5189 {
5190 if (dfa_workspace == NULL)
5191 dfa_workspace = (int *)malloc(DFA_WS_DIMENSION*sizeof(int));
5192 if (dfa_matched++ == 0)
5193 dfa_workspace[0] = -1; /* To catch bad restart */
5194 PCRE_DFA_EXEC(count, re, extra, bptr, len, start_offset,
5195 (options | g_notempty), use_offsets, use_size_offsets, dfa_workspace,
5196 DFA_WS_DIMENSION);
5197 if (count == 0)
5198 {
5199 fprintf(outfile, "Matched, but offsets vector is too small to show all matches\n");
5200 count = use_size_offsets/2;
5201 }
5202 }
5203 #endif
5204
5205 else
5206 {
5207 PCRE_EXEC(count, re, extra, bptr, len, start_offset,
5208 options | g_notempty, use_offsets, use_size_offsets);
5209 if (count == 0)
5210 {
5211 fprintf(outfile, "Matched, but too many substrings\n");
5212 /* 2 is a special case; match can be returned */
5213 count = (use_size_offsets == 2)? 1 : use_size_offsets/3;
5214 }
5215 }
5216
5217 /* Matched */
5218
5219 if (count >= 0)
5220 {
5221 int i, maxcount;
5222 void *cnptr, *gnptr;
5223
5224 #if !defined NODFA
5225 if (all_use_dfa || use_dfa) maxcount = use_size_offsets/2; else
5226 #endif
5227 /* 2 is a special case; match can be returned */
5228 maxcount = (use_size_offsets == 2)? 1 : use_size_offsets/3;
5229
5230 /* This is a check against a lunatic return value. */
5231
5232 if (count > maxcount)
5233 {
5234 fprintf(outfile,
5235 "** PCRE error: returned count %d is too big for offset size %d\n",
5236 count, use_size_offsets);
5237 count = use_size_offsets/3;
5238 if (do_g || do_G)
5239 {
5240 fprintf(outfile, "** /%c loop abandoned\n", do_g? 'g' : 'G');
5241 do_g = do_G = FALSE; /* Break g/G loop */
5242 }
5243 }
5244
5245 /* do_allcaps requests showing of all captures in the pattern, to check
5246 unset ones at the end. */
5247
5248 if (do_allcaps)
5249 {
5250 if (new_info(re, NULL, PCRE_INFO_CAPTURECOUNT, &count) < 0)
5251 goto SKIP_DATA;
5252 count++; /* Allow for full match */
5253 if (count * 2 > use_size_offsets) count = use_size_offsets/2;
5254 }
5255
5256 /* Output the captured substrings. Note that, for the matched string,
5257 the use of \K in an assertion can make the start later than the end. */
5258
5259 for (i = 0; i < count * 2; i += 2)
5260 {
5261 if (use_offsets[i] < 0)
5262 {
5263 if (use_offsets[i] != -1)
5264 fprintf(outfile, "ERROR: bad negative value %d for offset %d\n",
5265 use_offsets[i], i);
5266 if (use_offsets[i+1] != -1)
5267 fprintf(outfile, "ERROR: bad negative value %d for offset %d\n",
5268 use_offsets[i+1], i+1);
5269 fprintf(outfile, "%2d: <unset>\n", i/2);
5270 }
5271 else
5272 {
5273 int start = use_offsets[i];
5274 int end = use_offsets[i+1];
5275
5276 if (start > end)
5277 {
5278 start = use_offsets[i+1];
5279 end = use_offsets[i];
5280 fprintf(outfile, "Start of matched string is beyond its end - "
5281 "displaying from end to start.\n");
5282 }
5283
5284 fprintf(outfile, "%2d: ", i/2);
5285 PCHARSV(bptr, start, end - start, outfile);
5286 if (verify_jit && jit_was_used) fprintf(outfile, " (JIT)");
5287 fprintf(outfile, "\n");
5288
5289 /* Note: don't use the start/end variables here because we want to
5290 show the text from what is reported as the end. */
5291
5292 if (do_showcaprest || (i == 0 && do_showrest))
5293 {
5294 fprintf(outfile, "%2d+ ", i/2);
5295 PCHARSV(bptr, use_offsets[i+1], len - use_offsets[i+1],
5296 outfile);
5297 fprintf(outfile, "\n");
5298 }
5299 }
5300 }
5301
5302 if (markptr != NULL)
5303 {
5304 fprintf(outfile, "MK: ");
5305 PCHARSV(markptr, 0, -1, outfile);
5306 fprintf(outfile, "\n");
5307 }
5308
5309 for (i = 0; i < 32; i++)
5310 {
5311 if ((copystrings & (1 << i)) != 0)
5312 {
5313 int rc;
5314 char copybuffer[256];
5315 PCRE_COPY_SUBSTRING(rc, bptr, use_offsets, count, i,
5316 copybuffer, sizeof(copybuffer));
5317 if (rc < 0)
5318 fprintf(outfile, "copy substring %d failed %d\n", i, rc);
5319 else
5320 {
5321 fprintf(outfile, "%2dC ", i);
5322 PCHARSV(copybuffer, 0, rc, outfile);
5323 fprintf(outfile, " (%d)\n", rc);
5324 }
5325 }
5326 }
5327
5328 cnptr = copynames;
5329 for (;;)
5330 {
5331 int rc;
5332 char copybuffer[256];
5333
5334 #ifdef SUPPORT_PCRE32
5335 if (pcre_mode == PCRE32_MODE)
5336 {
5337 if (*(pcre_uint32 *)cnptr == 0) break;
5338 }
5339 #endif
5340 #ifdef SUPPORT_PCRE16
5341 if (pcre_mode == PCRE16_MODE)
5342 {
5343 if (*(pcre_uint16 *)cnptr == 0) break;
5344 }
5345 #endif
5346 #ifdef SUPPORT_PCRE8
5347 if (pcre_mode == PCRE8_MODE)
5348 {
5349 if (*(pcre_uint8 *)cnptr == 0) break;
5350 }
5351 #endif
5352
5353 PCRE_COPY_NAMED_SUBSTRING(rc, re, bptr, use_offsets, count,
5354 cnptr, copybuffer, sizeof(copybuffer));
5355
5356 if (rc < 0)
5357 {
5358 fprintf(outfile, "copy substring ");
5359 PCHARSV(cnptr, 0, -1, outfile);
5360 fprintf(outfile, " failed %d\n", rc);
5361 }
5362 else
5363 {
5364 fprintf(outfile, " C ");
5365 PCHARSV(copybuffer, 0, rc, outfile);
5366 fprintf(outfile, " (%d) ", rc);
5367 PCHARSV(cnptr, 0, -1, outfile);
5368 putc('\n', outfile);
5369 }
5370
5371 cnptr = (char *)cnptr + (STRLEN(cnptr) + 1) * CHAR_SIZE;
5372 }
5373
5374 for (i = 0; i < 32; i++)
5375 {
5376 if ((getstrings & (1 << i)) != 0)
5377 {
5378 int rc;
5379 const char *substring;
5380 PCRE_GET_SUBSTRING(rc, bptr, use_offsets, count, i, &substring);
5381 if (rc < 0)
5382 fprintf(outfile, "get substring %d failed %d\n", i, rc);
5383 else
5384 {
5385 fprintf(outfile, "%2dG ", i);
5386 PCHARSV(substring, 0, rc, outfile);
5387 fprintf(outfile, " (%d)\n", rc);
5388 PCRE_FREE_SUBSTRING(substring);
5389 }
5390 }
5391 }
5392
5393 gnptr = getnames;
5394 for (;;)
5395 {
5396 int rc;
5397 const char *substring;
5398
5399 #ifdef SUPPORT_PCRE32
5400 if (pcre_mode == PCRE32_MODE)
5401 {
5402 if (*(pcre_uint32 *)gnptr == 0) break;
5403 }
5404 #endif
5405 #ifdef SUPPORT_PCRE16
5406 if (pcre_mode == PCRE16_MODE)
5407 {
5408 if (*(pcre_uint16 *)gnptr == 0) break;
5409 }
5410 #endif
5411 #ifdef SUPPORT_PCRE8
5412 if (pcre_mode == PCRE8_MODE)
5413 {
5414 if (*(pcre_uint8 *)gnptr == 0) break;
5415 }
5416 #endif
5417
5418 PCRE_GET_NAMED_SUBSTRING(rc, re, bptr, use_offsets, count,
5419 gnptr, &substring);
5420 if (rc < 0)
5421 {
5422 fprintf(outfile, "get substring ");
5423 PCHARSV(gnptr, 0, -1, outfile);
5424 fprintf(outfile, " failed %d\n", rc);
5425 }
5426 else
5427 {
5428 fprintf(outfile, " G ");
5429 PCHARSV(substring, 0, rc, outfile);
5430 fprintf(outfile, " (%d) ", rc);
5431 PCHARSV(gnptr, 0, -1, outfile);
5432 PCRE_FREE_SUBSTRING(substring);
5433 putc('\n', outfile);
5434 }
5435
5436 gnptr = (char *)gnptr + (STRLEN(gnptr) + 1) * CHAR_SIZE;
5437 }
5438
5439 if (getlist)
5440 {
5441 int rc;
5442 const char **stringlist;
5443 PCRE_GET_SUBSTRING_LIST(rc, bptr, use_offsets, count, &stringlist);
5444 if (rc < 0)
5445 fprintf(outfile, "get substring list failed %d\n", rc);
5446 else
5447 {
5448 for (i = 0; i < count; i++)
5449 {
5450 fprintf(outfile, "%2dL ", i);
5451 PCHARSV(stringlist[i], 0, -1, outfile);
5452 putc('\n', outfile);
5453 }
5454 if (stringlist[i] != NULL)
5455 fprintf(outfile, "string list not terminated by NULL\n");
5456 PCRE_FREE_SUBSTRING_LIST(stringlist);
5457 }
5458 }
5459 }
5460
5461 /* There was a partial match. If the bumpalong point is not the same as
5462 the first inspected character, show the offset explicitly. */
5463
5464 else if (count == PCRE_ERROR_PARTIAL)
5465 {
5466 fprintf(outfile, "Partial match");
5467 if (use_size_offsets > 2 && use_offsets[0] != use_offsets[2])
5468 fprintf(outfile, " at offset %d", use_offsets[2]);
5469 if (markptr != NULL)
5470 {
5471 fprintf(outfile, ", mark=");
5472 PCHARSV(markptr, 0, -1, outfile);
5473 }
5474 if (use_size_offsets > 1)
5475 {
5476 fprintf(outfile, ": ");
5477 PCHARSV(bptr, use_offsets[0], use_offsets[1] - use_offsets[0],
5478 outfile);
5479 }
5480 if (verify_jit && jit_was_used) fprintf(outfile, " (JIT)");
5481 fprintf(outfile, "\n");
5482 break; /* Out of the /g loop */
5483 }
5484
5485 /* Failed to match. If this is a /g or /G loop and we previously set
5486 g_notempty after a null match, this is not necessarily the end. We want
5487 to advance the start offset, and continue. We won't be at the end of the
5488 string - that was checked before setting g_notempty.
5489
5490 Complication arises in the case when the newline convention is "any",
5491 "crlf", or "anycrlf". If the previous match was at the end of a line
5492 terminated by CRLF, an advance of one character just passes the \r,
5493 whereas we should prefer the longer newline sequence, as does the code in
5494 pcre_exec(). Fudge the offset value to achieve this. We check for a
5495 newline setting in the pattern; if none was set, use PCRE_CONFIG() to
5496 find the default.
5497
5498 Otherwise, in the case of UTF-8 matching, the advance must be one
5499 character, not one byte. */
5500
5501 else
5502 {
5503 if (g_notempty != 0)
5504 {
5505 int onechar = 1;
5506 unsigned int obits = REAL_PCRE_OPTIONS(re);
5507 use_offsets[0] = start_offset;
5508 if ((obits & PCRE_NEWLINE_BITS) == 0)
5509 {
5510 int d;
5511 (void)PCRE_CONFIG(PCRE_CONFIG_NEWLINE, &d);
5512 /* Note that these values are always the ASCII ones, even in
5513 EBCDIC environments. CR = 13, NL = 10. */
5514 obits = (d == 13)? PCRE_NEWLINE_CR :
5515 (d == 10)? PCRE_NEWLINE_LF :
5516 (d == (13<<8 | 10))? PCRE_NEWLINE_CRLF :
5517 (d == -2)? PCRE_NEWLINE_ANYCRLF :
5518 (d == -1)? PCRE_NEWLINE_ANY : 0;
5519 }
5520 if (((obits & PCRE_NEWLINE_BITS) == PCRE_NEWLINE_ANY ||
5521 (obits & PCRE_NEWLINE_BITS) == PCRE_NEWLINE_CRLF ||
5522 (obits & PCRE_NEWLINE_BITS) == PCRE_NEWLINE_ANYCRLF)
5523 &&
5524 start_offset < len - 1 && (
5525 #ifdef SUPPORT_PCRE8
5526 (pcre_mode == PCRE8_MODE &&
5527 bptr[start_offset] == '\r' &&
5528 bptr[start_offset + 1] == '\n') ||
5529 #endif
5530 #ifdef SUPPORT_PCRE16
5531 (pcre_mode == PCRE16_MODE &&
5532 ((PCRE_SPTR16)bptr)[start_offset] == '\r' &&
5533 ((PCRE_SPTR16)bptr)[start_offset + 1] == '\n') ||
5534 #endif
5535 #ifdef SUPPORT_PCRE32
5536 (pcre_mode == PCRE32_MODE &&
5537 ((PCRE_SPTR32)bptr)[start_offset] == '\r' &&
5538 ((PCRE_SPTR32)bptr)[start_offset + 1] == '\n') ||
5539 #endif
5540 0))
5541 onechar++;
5542 else if (use_utf)
5543 {
5544 while (start_offset + onechar < len)
5545 {
5546 if ((bptr[start_offset+onechar] & 0xc0) != 0x80) break;
5547 onechar++;
5548 }
5549 }
5550 use_offsets[1] = start_offset + onechar;
5551 }
5552 else
5553 {
5554 switch(count)
5555 {
5556 case PCRE_ERROR_NOMATCH:
5557 if (gmatched == 0)
5558 {
5559 if (markptr == NULL)
5560 {
5561 fprintf(outfile, "No match");
5562 }
5563 else
5564 {
5565 fprintf(outfile, "No match, mark = ");
5566 PCHARSV(markptr, 0, -1, outfile);
5567 }
5568 if (verify_jit && jit_was_used) fprintf(outfile, " (JIT)");
5569 putc('\n', outfile);
5570 }
5571 break;
5572
5573 case PCRE_ERROR_BADUTF8:
5574 case PCRE_ERROR_SHORTUTF8:
5575 fprintf(outfile, "Error %d (%s UTF-%d string)", count,
5576 (count == PCRE_ERROR_BADUTF8)? "bad" : "short",
5577 8 * CHAR_SIZE);
5578 if (use_size_offsets >= 2)
5579 fprintf(outfile, " offset=%d reason=%d", use_offsets[0],
5580 use_offsets[1]);
5581 fprintf(outfile, "\n");
5582 break;
5583
5584 case PCRE_ERROR_BADUTF8_OFFSET:
5585 fprintf(outfile, "Error %d (bad UTF-%d offset)\n", count,
5586 8 * CHAR_SIZE);
5587 break;
5588
5589 default:
5590 if (count < 0 &&
5591 (-count) < (int)(sizeof(errtexts)/sizeof(const char *)))
5592 fprintf(outfile, "Error %d (%s)\n", count, errtexts[-count]);
5593 else
5594 fprintf(outfile, "Error %d (Unexpected value)\n", count);
5595 break;
5596 }
5597
5598 break; /* Out of the /g loop */
5599 }
5600 }
5601
5602 /* If not /g or /G we are done */
5603
5604 if (!do_g && !do_G) break;
5605
5606 /* If we have matched an empty string, first check to see if we are at
5607 the end of the subject. If so, the /g loop is over. Otherwise, mimic what
5608 Perl's /g options does. This turns out to be rather cunning. First we set
5609 PCRE_NOTEMPTY_ATSTART and PCRE_ANCHORED and try the match again at the
5610 same point. If this fails (picked up above) we advance to the next
5611 character. */
5612
5613 g_notempty = 0;
5614
5615 if (use_offsets[0] == use_offsets[1])
5616 {
5617 if (use_offsets[0] == len) break;
5618 g_notempty = PCRE_NOTEMPTY_ATSTART | PCRE_ANCHORED;
5619 }
5620
5621 /* For /g, update the start offset, leaving the rest alone */
5622
5623 if (do_g) start_offset = use_offsets[1];
5624
5625 /* For /G, update the pointer and length */
5626
5627 else
5628 {
5629 bptr += use_offsets[1] * CHAR_SIZE;
5630 len -= use_offsets[1];
5631 }
5632 } /* End of loop for /g and /G */
5633
5634 NEXT_DATA: continue;
5635 } /* End of loop for data lines */
5636
5637 CONTINUE:
5638
5639 #if !defined NOPOSIX
5640 if (posix || do_posix) regfree(&preg);
5641 #endif
5642
5643 if (re != NULL) new_free(re);
5644 if (extra != NULL)
5645 {
5646 PCRE_FREE_STUDY(extra);
5647 }
5648 if (locale_set)
5649 {
5650 new_free((void *)tables);
5651 setlocale(LC_CTYPE, "C");
5652 locale_set = 0;
5653 }
5654 if (jit_stack != NULL)
5655 {
5656 PCRE_JIT_STACK_FREE(jit_stack);
5657 jit_stack = NULL;
5658 }
5659 }
5660
5661 if (infile == stdin) fprintf(outfile, "\n");
5662
5663 if (showtotaltimes)
5664 {
5665 fprintf(outfile, "--------------------------------------\n");
5666 if (timeit > 0)
5667 {
5668 fprintf(outfile, "Total compile time %.4f milliseconds\n",
5669 (((double)total_compile_time * 1000.0) / (double)timeit) /
5670 (double)CLOCKS_PER_SEC);
5671 fprintf(outfile, "Total study time %.4f milliseconds\n",
5672 (((double)total_study_time * 1000.0) / (double)timeit) /
5673 (double)CLOCKS_PER_SEC);
5674 }
5675 fprintf(outfile, "Total execute time %.4f milliseconds\n",
5676 (((double)total_match_time * 1000.0) / (double)timeitm) /
5677 (double)CLOCKS_PER_SEC);
5678 }
5679
5680 EXIT:
5681
5682 if (infile != NULL && infile != stdin) fclose(infile);
5683 if (outfile != NULL && outfile != stdout) fclose(outfile);
5684
5685 free(buffer);
5686 free(dbuffer);
5687 free(pbuffer);
5688 free(offsets);
5689
5690 #ifdef SUPPORT_PCRE16
5691 if (buffer16 != NULL) free(buffer16);
5692 #endif
5693 #ifdef SUPPORT_PCRE32
5694 if (buffer32 != NULL) free(buffer32);
5695 #endif
5696
5697 #if !defined NODFA
5698 if (dfa_workspace != NULL)
5699 free(dfa_workspace);
5700 #endif
5701
5702 #if defined(__VMS)
5703 yield = SS$_NORMAL; /* Return values via DCL symbols */
5704 #endif
5705
5706 return yield;
5707 }
5708
5709 /* End of pcretest.c */
5710