/****************************************************************************** * * Copyright (C) 1999-2012 Broadcom Corporation * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ******************************************************************************/ #ifndef GATT_API_H #define GATT_API_H #include "bt_target.h" #include "gattdefs.h" #include "btm_ble_api.h" /***************************************************************************** ** Constants *****************************************************************************/ /* Success code and error codes */ #define GATT_SUCCESS 0x00 #define GATT_INVALID_HANDLE 0x01 #define GATT_READ_NOT_PERMIT 0x02 #define GATT_WRITE_NOT_PERMIT 0x03 #define GATT_INVALID_PDU 0x04 #define GATT_INSUF_AUTHENTICATION 0x05 #define GATT_REQ_NOT_SUPPORTED 0x06 #define GATT_INVALID_OFFSET 0x07 #define GATT_INSUF_AUTHORIZATION 0x08 #define GATT_PREPARE_Q_FULL 0x09 #define GATT_NOT_FOUND 0x0a #define GATT_NOT_LONG 0x0b #define GATT_INSUF_KEY_SIZE 0x0c #define GATT_INVALID_ATTR_LEN 0x0d #define GATT_ERR_UNLIKELY 0x0e #define GATT_INSUF_ENCRYPTION 0x0f #define GATT_UNSUPPORT_GRP_TYPE 0x10 #define GATT_INSUF_RESOURCE 0x11 #define GATT_ILLEGAL_PARAMETER 0x87 #define GATT_NO_RESOURCES 0x80 #define GATT_INTERNAL_ERROR 0x81 #define GATT_WRONG_STATE 0x82 #define GATT_DB_FULL 0x83 #define GATT_BUSY 0x84 #define GATT_ERROR 0x85 #define GATT_CMD_STARTED 0x86 #define GATT_PENDING 0x88 #define GATT_AUTH_FAIL 0x89 #define GATT_MORE 0x8a #define GATT_INVALID_CFG 0x8b #define GATT_SERVICE_STARTED 0x8c #define GATT_ENCRYPED_MITM GATT_SUCCESS #define GATT_ENCRYPED_NO_MITM 0x8d #define GATT_NOT_ENCRYPTED 0x8e #define GATT_CONGESTED 0x8f /* 0xE0 ~ 0xFC reserved for future use */ #define GATT_CCC_CFG_ERR 0xFD /* Client Characteristic Configuration Descriptor Improperly Configured */ #define GATT_PRC_IN_PROGRESS 0xFE /* Procedure Already in progress */ #define GATT_OUT_OF_RANGE 0xFF /* Attribute value out of range */ typedef UINT8 tGATT_STATUS; #define GATT_RSP_ERROR 0x01 #define GATT_REQ_MTU 0x02 #define GATT_RSP_MTU 0x03 #define GATT_REQ_FIND_INFO 0x04 #define GATT_RSP_FIND_INFO 0x05 #define GATT_REQ_FIND_TYPE_VALUE 0x06 #define GATT_RSP_FIND_TYPE_VALUE 0x07 #define GATT_REQ_READ_BY_TYPE 0x08 #define GATT_RSP_READ_BY_TYPE 0x09 #define GATT_REQ_READ 0x0A #define GATT_RSP_READ 0x0B #define GATT_REQ_READ_BLOB 0x0C #define GATT_RSP_READ_BLOB 0x0D #define GATT_REQ_READ_MULTI 0x0E #define GATT_RSP_READ_MULTI 0x0F #define GATT_REQ_READ_BY_GRP_TYPE 0x10 #define GATT_RSP_READ_BY_GRP_TYPE 0x11 #define GATT_REQ_WRITE 0x12 /* 0001-0010 (write)*/ #define GATT_RSP_WRITE 0x13 #define GATT_CMD_WRITE 0x52 /* changed in V4.0 01001-0010(write cmd)*/ #define GATT_REQ_PREPARE_WRITE 0x16 #define GATT_RSP_PREPARE_WRITE 0x17 #define GATT_REQ_EXEC_WRITE 0x18 #define GATT_RSP_EXEC_WRITE 0x19 #define GATT_HANDLE_VALUE_NOTIF 0x1B #define GATT_HANDLE_VALUE_IND 0x1D #define GATT_HANDLE_VALUE_CONF 0x1E #define GATT_SIGN_CMD_WRITE 0xD2 /* changed in V4.0 1101-0010 (signed write) see write cmd above*/ #define GATT_OP_CODE_MAX GATT_HANDLE_VALUE_CONF + 1 /* 0x1E = 30 + 1 = 31*/ #define GATT_HANDLE_IS_VALID(x) ((x) != 0) #define GATT_CONN_UNKNOWN 0 #define GATT_CONN_L2C_FAILURE 1 /* general L2cap failure */ #define GATT_CONN_TIMEOUT HCI_ERR_CONNECTION_TOUT /* 0x08 connection timeout */ #define GATT_CONN_TERMINATE_PEER_USER HCI_ERR_PEER_USER /* 0x13 connection terminate by peer user */ #define GATT_CONN_TERMINATE_LOCAL_HOST HCI_ERR_CONN_CAUSE_LOCAL_HOST /* 0x16 connectionterminated by local host */ #define GATT_CONN_FAIL_ESTABLISH HCI_ERR_CONN_FAILED_ESTABLISHMENT/* 0x03E connection fail to establish */ #define GATT_CONN_LMP_TIMEOUT HCI_ERR_LMP_RESPONSE_TIMEOUT /* 0x22 connection fail for LMP response tout */ #define GATT_CONN_CANCEL L2CAP_CONN_CANCEL /* 0x0100 L2CAP connection cancelled */ typedef UINT16 tGATT_DISCONN_REASON; /* MAX GATT MTU size */ #ifndef GATT_MAX_MTU_SIZE #define GATT_MAX_MTU_SIZE 517 #endif /* max legth of an attribute value */ #ifndef GATT_MAX_ATTR_LEN #define GATT_MAX_ATTR_LEN 600 #endif /* default GATT MTU size over LE link */ #define GATT_DEF_BLE_MTU_SIZE 23 /* invalid connection ID */ #define GATT_INVALID_CONN_ID 0xFFFF #ifndef GATT_CL_MAX_LCB #define GATT_CL_MAX_LCB 22 #endif #ifndef GATT_MAX_SCCB #define GATT_MAX_SCCB 10 #endif /* GATT notification caching timer, default to be three seconds */ #ifndef GATTC_NOTIF_TIMEOUT #define GATTC_NOTIF_TIMEOUT 3 #endif /***************************************************************************** ** GATT Structure Definition *****************************************************************************/ /* Attribute permissions */ #define GATT_PERM_READ (1 << 0) /* bit 0 */ #define GATT_PERM_READ_ENCRYPTED (1 << 1) /* bit 1 */ #define GATT_PERM_READ_ENC_MITM (1 << 2) /* bit 2 */ #define GATT_PERM_WRITE (1 << 4) /* bit 4 */ #define GATT_PERM_WRITE_ENCRYPTED (1 << 5) /* bit 5 */ #define GATT_PERM_WRITE_ENC_MITM (1 << 6) /* bit 6 */ #define GATT_PERM_WRITE_SIGNED (1 << 7) /* bit 7 */ #define GATT_PERM_WRITE_SIGNED_MITM (1 << 8) /* bit 8 */ typedef UINT16 tGATT_PERM; #define GATT_ENCRYPT_KEY_SIZE_MASK (0xF000) /* the MS nibble of tGATT_PERM; key size 7=0; size 16=9 */ #define GATT_READ_ALLOWED (GATT_PERM_READ | GATT_PERM_READ_ENCRYPTED | GATT_PERM_READ_ENC_MITM) #define GATT_READ_AUTH_REQUIRED (GATT_PERM_READ_ENCRYPTED) #define GATT_READ_MITM_REQUIRED (GATT_PERM_READ_ENC_MITM) #define GATT_READ_ENCRYPTED_REQUIRED (GATT_PERM_READ_ENCRYPTED | GATT_PERM_READ_ENC_MITM) #define GATT_WRITE_ALLOWED (GATT_PERM_WRITE | GATT_PERM_WRITE_ENCRYPTED | GATT_PERM_WRITE_ENC_MITM | \ GATT_PERM_WRITE_SIGNED | GATT_PERM_WRITE_SIGNED_MITM) #define GATT_WRITE_AUTH_REQUIRED (GATT_PERM_WRITE_ENCRYPTED | GATT_PERM_WRITE_SIGNED) #define GATT_WRITE_MITM_REQUIRED (GATT_PERM_WRITE_ENC_MITM | GATT_PERM_WRITE_SIGNED_MITM) #define GATT_WRITE_ENCRYPTED_PERM (GATT_PERM_WRITE_ENCRYPTED | GATT_PERM_WRITE_ENC_MITM) #define GATT_WRITE_SIGNED_PERM (GATT_PERM_WRITE_SIGNED | GATT_PERM_WRITE_SIGNED_MITM) /* Characteristic properties */ #define GATT_CHAR_PROP_BIT_BROADCAST (1 << 0) #define GATT_CHAR_PROP_BIT_READ (1 << 1) #define GATT_CHAR_PROP_BIT_WRITE_NR (1 << 2) #define GATT_CHAR_PROP_BIT_WRITE (1 << 3) #define GATT_CHAR_PROP_BIT_NOTIFY (1 << 4) #define GATT_CHAR_PROP_BIT_INDICATE (1 << 5) #define GATT_CHAR_PROP_BIT_AUTH (1 << 6) #define GATT_CHAR_PROP_BIT_EXT_PROP (1 << 7) typedef UINT8 tGATT_CHAR_PROP; /* Format of the value of a characteristic. enumeration type */ enum { GATT_FORMAT_RES, /* rfu */ GATT_FORMAT_BOOL, /* 0x01 boolean */ GATT_FORMAT_2BITS, /* 0x02 2 bit */ GATT_FORMAT_NIBBLE, /* 0x03 nibble */ GATT_FORMAT_UINT8, /* 0x04 uint8 */ GATT_FORMAT_UINT12, /* 0x05 uint12 */ GATT_FORMAT_UINT16, /* 0x06 uint16 */ GATT_FORMAT_UINT24, /* 0x07 uint24 */ GATT_FORMAT_UINT32, /* 0x08 uint32 */ GATT_FORMAT_UINT48, /* 0x09 uint48 */ GATT_FORMAT_UINT64, /* 0x0a uint64 */ GATT_FORMAT_UINT128, /* 0x0B uint128 */ GATT_FORMAT_SINT8, /* 0x0C signed 8 bit integer */ GATT_FORMAT_SINT12, /* 0x0D signed 12 bit integer */ GATT_FORMAT_SINT16, /* 0x0E signed 16 bit integer */ GATT_FORMAT_SINT24, /* 0x0F signed 24 bit integer */ GATT_FORMAT_SINT32, /* 0x10 signed 32 bit integer */ GATT_FORMAT_SINT48, /* 0x11 signed 48 bit integer */ GATT_FORMAT_SINT64, /* 0x12 signed 64 bit integer */ GATT_FORMAT_SINT128, /* 0x13 signed 128 bit integer */ GATT_FORMAT_FLOAT32, /* 0x14 float 32 */ GATT_FORMAT_FLOAT64, /* 0x15 float 64*/ GATT_FORMAT_SFLOAT, /* 0x16 IEEE-11073 16 bit SFLOAT */ GATT_FORMAT_FLOAT, /* 0x17 IEEE-11073 32 bit SFLOAT */ GATT_FORMAT_DUINT16, /* 0x18 IEEE-20601 format */ GATT_FORMAT_UTF8S, /* 0x19 UTF-8 string */ GATT_FORMAT_UTF16S, /* 0x1a UTF-16 string */ GATT_FORMAT_STRUCT, /* 0x1b Opaque structure*/ GATT_FORMAT_MAX /* 0x1c or above reserved */ }; typedef UINT8 tGATT_FORMAT; /* Characteristic Presentation Format Descriptor value */ typedef struct { UINT16 unit; /* as UUIUD defined by SIG */ UINT16 descr; /* as UUID as defined by SIG */ tGATT_FORMAT format; INT8 exp; UINT8 name_spc; /* The name space of the description */ } tGATT_CHAR_PRES; /* Characteristic Report reference Descriptor format */ typedef struct { UINT8 rpt_id; /* report ID */ UINT8 rpt_type; /* report type */ } tGATT_CHAR_RPT_REF; #define GATT_VALID_RANGE_MAX_SIZE 16 typedef struct { UINT8 format; UINT16 len; UINT8 lower_range[GATT_VALID_RANGE_MAX_SIZE]; /* in little endian format */ UINT8 upper_range[GATT_VALID_RANGE_MAX_SIZE]; } tGATT_VALID_RANGE; /* Characteristic Aggregate Format attribute value */ #define GATT_AGGR_HANDLE_NUM_MAX 10 typedef struct { UINT8 num_handle; UINT16 handle_list[GATT_AGGR_HANDLE_NUM_MAX]; } tGATT_CHAR_AGGRE; /* Characteristic descriptor: Extended Properties value */ #define GATT_CHAR_BIT_REL_WRITE 0x0001 /* permits reliable writes of the Characteristic Value */ #define GATT_CHAR_BIT_WRITE_AUX 0x0002 /* permits writes to the characteristic descriptor */ /* characteristic descriptor: client configuration value */ #define GATT_CLT_CONFIG_NONE 0x0000 #define GATT_CLT_CONFIG_NOTIFICATION 0x0001 #define GATT_CLT_CONFIG_INDICATION 0x0002 typedef UINT16 tGATT_CLT_CHAR_CONFIG; /* characteristic descriptor: server configuration value */ #define GATT_SVR_CONFIG_NONE 0x0000 #define GATT_SVR_CONFIG_BROADCAST 0x0001 typedef UINT16 tGATT_SVR_CHAR_CONFIG; /* Characteristic descriptor: Extended Properties value */ #define GATT_CHAR_BIT_REL_WRITE 0x0001 /* permits reliable writes of the Characteristic Value */ #define GATT_CHAR_BIT_WRITE_AUX 0x0002 /* permits writes to the characteristic descriptor */ /* authentication requirement */ #define GATT_AUTH_REQ_NONE 0 #define GATT_AUTH_REQ_NO_MITM 1 /* unauthenticated encryption */ #define GATT_AUTH_REQ_MITM 2 /* authenticated encryption */ #define GATT_AUTH_REQ_SIGNED_NO_MITM 3 #define GATT_AUTH_REQ_SIGNED_MITM 4 typedef UINT8 tGATT_AUTH_REQ; /* Attribute Value structure */ typedef struct { UINT16 conn_id; UINT16 handle; /* attribute handle */ UINT16 offset; /* attribute value offset, if no offfset is needed for the command, ignore it */ UINT16 len; /* length of attribute value */ tGATT_AUTH_REQ auth_req; /* authentication request */ UINT8 value[GATT_MAX_ATTR_LEN]; /* the actual attribute value */ } tGATT_VALUE; /* Union of the event data which is used in the server respond API to carry the server response information */ typedef union { /* data type member event */ tGATT_VALUE attr_value; /* READ, HANDLE_VALUE_IND, PREPARE_WRITE */ /* READ_BLOB, READ_BY_TYPE */ UINT16 handle; /* WRITE, WRITE_BLOB */ } tGATTS_RSP; /* Transports for the primary service */ #define GATT_TRANSPORT_LE BT_TRANSPORT_LE #define GATT_TRANSPORT_BR_EDR BT_TRANSPORT_BR_EDR #define GATT_TRANSPORT_LE_BR_EDR (BT_TRANSPORT_LE|BT_TRANSPORT_BR_EDR) typedef UINT8 tGATT_TRANSPORT; #define GATT_PREP_WRITE_CANCEL 0x00 #define GATT_PREP_WRITE_EXEC 0x01 typedef UINT8 tGATT_EXEC_FLAG; /* read request always based on UUID */ typedef struct { UINT16 handle; UINT16 offset; BOOLEAN is_long; } tGATT_READ_REQ; /* write request data */ typedef struct { UINT16 handle; /* attribute handle */ UINT16 offset; /* attribute value offset, if no offfset is needed for the command, ignore it */ UINT16 len; /* length of attribute value */ UINT8 value[GATT_MAX_ATTR_LEN]; /* the actual attribute value */ BOOLEAN need_rsp; /* need write response */ BOOLEAN is_prep; /* is prepare write */ } tGATT_WRITE_REQ; /* callback data for server access request from client */ typedef union { tGATT_READ_REQ read_req; /* read request, read by Type, read blob */ tGATT_WRITE_REQ write_req; /* write */ /* prepare write */ /* write blob */ UINT16 handle; /* handle value confirmation */ UINT16 mtu; /* MTU exchange request */ tGATT_EXEC_FLAG exec_write; /* execute write */ } tGATTS_DATA; typedef UINT8 tGATT_SERV_IF; /* GATT Service Interface */ enum { GATTS_REQ_TYPE_READ = 1, /* Attribute read request */ GATTS_REQ_TYPE_WRITE, /* Attribute write request */ GATTS_REQ_TYPE_WRITE_EXEC, /* Execute write */ GATTS_REQ_TYPE_MTU, /* MTU exchange information */ GATTS_REQ_TYPE_CONF /* handle value confirmation */ }; typedef UINT8 tGATTS_REQ_TYPE; /* Client Used Data Structure */ /* definition of different discovery types */ enum { GATT_DISC_SRVC_ALL = 1, /* discover all services */ GATT_DISC_SRVC_BY_UUID, /* discover service of a special type */ GATT_DISC_INC_SRVC, /* discover the included service within a service */ GATT_DISC_CHAR, /* discover characteristics of a service with/without type requirement */ GATT_DISC_CHAR_DSCPT, /* discover characteristic descriptors of a character */ GATT_DISC_MAX /* maximnun discover type */ }; typedef UINT8 tGATT_DISC_TYPE; /* Discover parameters of different discovery types */ typedef struct { tBT_UUID service; UINT16 s_handle; UINT16 e_handle; }tGATT_DISC_PARAM; /* GATT read type enumeration */ enum { GATT_READ_BY_TYPE = 1, GATT_READ_BY_HANDLE, GATT_READ_MULTIPLE, GATT_READ_CHAR_VALUE, GATT_READ_PARTIAL, GATT_READ_MAX }; typedef UINT8 tGATT_READ_TYPE; /* Read By Type Request (GATT_READ_BY_TYPE) Data */ typedef struct { tGATT_AUTH_REQ auth_req; UINT16 s_handle; UINT16 e_handle; tBT_UUID uuid; } tGATT_READ_BY_TYPE; /* GATT_READ_MULTIPLE request data */ #define GATT_MAX_READ_MULTI_HANDLES 10 /* Max attributes to read in one request */ typedef struct { tGATT_AUTH_REQ auth_req; UINT16 num_handles; /* number of handles to read */ UINT16 handles[GATT_MAX_READ_MULTI_HANDLES]; /* handles list to be read */ } tGATT_READ_MULTI; /* Read By Handle Request (GATT_READ_BY_HANDLE) data */ typedef struct { tGATT_AUTH_REQ auth_req; UINT16 handle; } tGATT_READ_BY_HANDLE; /* READ_BT_HANDLE_Request data */ typedef struct { tGATT_AUTH_REQ auth_req; UINT16 handle; UINT16 offset; } tGATT_READ_PARTIAL; /* Read Request Data */ typedef union { tGATT_READ_BY_TYPE service; tGATT_READ_BY_TYPE char_type; /* characterisitc type */ tGATT_READ_MULTI read_multiple; tGATT_READ_BY_HANDLE by_handle; tGATT_READ_PARTIAL partial; } tGATT_READ_PARAM; /* GATT write type enumeration */ enum { GATT_WRITE_NO_RSP = 1, GATT_WRITE , GATT_WRITE_PREPARE }; typedef UINT8 tGATT_WRITE_TYPE; /* Client Operation Complete Callback Data */ typedef union { tGATT_VALUE att_value; UINT16 mtu; UINT16 handle; } tGATT_CL_COMPLETE; /* GATT client operation type, used in client callback function */ #define GATTC_OPTYPE_NONE 0 #define GATTC_OPTYPE_DISCOVERY 1 #define GATTC_OPTYPE_READ 2 #define GATTC_OPTYPE_WRITE 3 #define GATTC_OPTYPE_EXE_WRITE 4 #define GATTC_OPTYPE_CONFIG 5 #define GATTC_OPTYPE_NOTIFICATION 6 #define GATTC_OPTYPE_INDICATION 7 typedef UINT8 tGATTC_OPTYPE; /* characteristic declaration */ typedef struct { tGATT_CHAR_PROP char_prop; /* characterisitc properties */ UINT16 val_handle; /* characteristic value attribute handle */ tBT_UUID char_uuid; /* characteristic UUID type */ } tGATT_CHAR_DCLR_VAL; /* primary service group data */ typedef struct { UINT16 e_handle; /* ending handle of the group */ tBT_UUID service_type; /* group type */ } tGATT_GROUP_VALUE; /* included service attribute value */ typedef struct { tBT_UUID service_type; /* included service UUID */ UINT16 s_handle; /* starting handle */ UINT16 e_handle; /* ending handle */ } tGATT_INCL_SRVC; typedef union { tGATT_INCL_SRVC incl_service; /* include service value */ tGATT_GROUP_VALUE group_value; /* Service UUID type. This field is used with GATT_DISC_SRVC_ALL or GATT_DISC_SRVC_BY_UUID type of discovery result callback. */ UINT16 handle; /* When used with GATT_DISC_INC_SRVC type discovery result, it is the included service starting handle.*/ tGATT_CHAR_DCLR_VAL dclr_value; /* Characteristic declaration value. This field is used with GATT_DISC_CHAR type discovery.*/ } tGATT_DISC_VALUE; /* discover result record */ typedef struct { tBT_UUID type; UINT16 handle; tGATT_DISC_VALUE value; } tGATT_DISC_RES; #define GATT_LINK_IDLE_TIMEOUT_WHEN_NO_APP 1 /* start a idle timer for this duration when no application need to use the link */ #define GATT_LINK_NO_IDLE_TIMEOUT 0xFFFF #define GATT_INVALID_ACL_HANDLE 0xFFFF /* discover result callback function */ typedef void (tGATT_DISC_RES_CB) (UINT16 conn_id, tGATT_DISC_TYPE disc_type, tGATT_DISC_RES *p_data); /* discover complete callback function */ typedef void (tGATT_DISC_CMPL_CB) (UINT16 conn_id, tGATT_DISC_TYPE disc_type, tGATT_STATUS status); /* Define a callback function for when read/write/disc/config operation is completed. */ typedef void (tGATT_CMPL_CBACK) (UINT16 conn_id, tGATTC_OPTYPE op, tGATT_STATUS status, tGATT_CL_COMPLETE *p_data); /* Define a callback function when an initialized connection is established. */ typedef void (tGATT_CONN_CBACK) (tGATT_IF gatt_if, BD_ADDR bda, UINT16 conn_id, BOOLEAN connected, tGATT_DISCONN_REASON reason, tBT_TRANSPORT transport); /* attribute request callback for ATT server */ typedef void (tGATT_REQ_CBACK )(UINT16 conn_id, UINT32 trans_id, tGATTS_REQ_TYPE type, tGATTS_DATA *p_data); /* channel congestion/uncongestion callback */ typedef void (tGATT_CONGESTION_CBACK )(UINT16 conn_id, BOOLEAN congested); /* Define a callback function when encryption is established. */ typedef void (tGATT_ENC_CMPL_CB)(tGATT_IF gatt_if, BD_ADDR bda); /* Define the structure that applications use to register with ** GATT. This structure includes callback functions. All functions ** MUST be provided. */ typedef struct { tGATT_CONN_CBACK *p_conn_cb; tGATT_CMPL_CBACK *p_cmpl_cb; tGATT_DISC_RES_CB *p_disc_res_cb; tGATT_DISC_CMPL_CB *p_disc_cmpl_cb; tGATT_REQ_CBACK *p_req_cb; tGATT_ENC_CMPL_CB *p_enc_cmpl_cb; tGATT_CONGESTION_CBACK *p_congestion_cb; } tGATT_CBACK; /*********************** Start Handle Management Definitions ********************** */ typedef struct { tBT_UUID app_uuid128; tBT_UUID svc_uuid; UINT16 svc_inst; UINT16 s_handle; UINT16 e_handle; BOOLEAN is_primary; /* primary service or secondary */ } tGATTS_HNDL_RANGE; #define GATTS_SRV_CHG_CMD_ADD_CLIENT 1 #define GATTS_SRV_CHG_CMD_UPDATE_CLIENT 2 #define GATTS_SRV_CHG_CMD_REMOVE_CLIENT 3 #define GATTS_SRV_CHG_CMD_READ_NUM_CLENTS 4 #define GATTS_SRV_CHG_CMD_READ_CLENT 5 typedef UINT8 tGATTS_SRV_CHG_CMD; typedef struct { BD_ADDR bda; BOOLEAN srv_changed; } tGATTS_SRV_CHG; typedef union { tGATTS_SRV_CHG srv_chg; UINT8 client_read_index; /* only used for sequential reading client srv chg info */ } tGATTS_SRV_CHG_REQ; typedef union { tGATTS_SRV_CHG srv_chg; UINT8 num_clients; } tGATTS_SRV_CHG_RSP; typedef struct { tGATTS_HNDL_RANGE *p_new_srv_start; } tGATTS_PENDING_NEW_SRV_START; /* Attibute server handle ranges NV storage callback functions */ typedef void (tGATTS_NV_SAVE_CBACK)(BOOLEAN is_saved, tGATTS_HNDL_RANGE *p_hndl_range); typedef BOOLEAN (tGATTS_NV_SRV_CHG_CBACK)(tGATTS_SRV_CHG_CMD cmd, tGATTS_SRV_CHG_REQ *p_req, tGATTS_SRV_CHG_RSP *p_rsp); typedef struct { tGATTS_NV_SAVE_CBACK *p_nv_save_callback; tGATTS_NV_SRV_CHG_CBACK *p_srv_chg_callback; } tGATT_APPL_INFO; /* *********************** End Handle Management Definitions **********************/ /***************************************************************************** ** External Function Declarations *****************************************************************************/ #ifdef __cplusplus extern "C" { #endif /******************************************************************************* ** ** Function GATT_SetTraceLevel ** ** Description This function sets the trace level. If called with ** a value of 0xFF, it simply returns the current trace level. ** ** Returns The new or current trace level ** *******************************************************************************/ extern UINT8 GATT_SetTraceLevel (UINT8 new_level); /*******************************************************************************/ /* GATT Profile API Functions */ /*******************************************************************************/ /* GATT Profile Server Functions */ /*******************************************************************************/ /******************************************************************************* ** ** Function GATTS_AddHandleRange ** ** Description This function add the allocated handles range for the specifed ** application UUID, service UUID and service instance ** ** Parameter p_hndl_range: pointer to allocated handles information ** ** Returns TRUE if handle range is added sucessfully; otherwise FALSE. ** *******************************************************************************/ extern BOOLEAN GATTS_AddHandleRange(tGATTS_HNDL_RANGE *p_hndl_range); /******************************************************************************* ** ** Function GATTS_NVRegister ** ** Description Application manager calls this function to register for ** NV save callback function. There can be one and only one ** NV save callback function. ** ** Parameter p_cb_info : callback informaiton ** ** Returns TRUE if registered OK, else FALSE ** *******************************************************************************/ extern BOOLEAN GATTS_NVRegister (tGATT_APPL_INFO *p_cb_info); /******************************************************************************* ** ** Function GATTS_CreateService ** ** Description This function is called to reserve a block of handles for a service. ** ** *** It should be called only once per service instance *** ** ** Parameter gatt_if : application if ** p_svc_uuid : service UUID ** svc_inst : instance of the service inside the application ** num_handles : number of handles needed by the service. ** is_pri : is a primary service or not. ** ** Returns service handle if sucessful, otherwise 0. ** *******************************************************************************/ extern UINT16 GATTS_CreateService (tGATT_IF gatt_if, tBT_UUID *p_svc_uuid, UINT16 svc_inst, UINT16 num_handles, BOOLEAN is_pri); /******************************************************************************* ** ** Function GATTS_AddIncludeService ** ** Description This function is called to add an included service. ** ** Parameter service_handle : To which service this included service is added to. ** include_svc_handle : included service handle. ** ** Returns included service attribute handle. If 0, add included service ** fail. ** *******************************************************************************/ extern UINT16 GATTS_AddIncludeService (UINT16 service_handle, UINT16 include_svc_handle); /******************************************************************************* ** ** Function GATTS_AddCharacteristic ** ** Description This function is called to add a characteristic into a service. ** It will add a characteristic declaration and characteristic ** value declaration into the service database identified by the ** service handle. ** ** Parameter service_handle : To which service this included service is added to. ** char_uuid : Characteristic UUID. ** perm : Characteristic value declaration attribute permission. ** property : Characteristic Properties ** ** Returns Characteristic value declaration attribute handle. 0 if add ** characteristic failed. ** *******************************************************************************/ extern UINT16 GATTS_AddCharacteristic (UINT16 service_handle, tBT_UUID *char_uuid, tGATT_PERM perm,tGATT_CHAR_PROP property); /******************************************************************************* ** ** Function GATTS_AddCharDescriptor ** ** Description This function is called to add a characteristic descriptor ** into a service database. Add descriptor should follow add char ** to which it belongs, and next add char should be done only ** after all add descriptors for the previous char. ** ** Parameter service_handle : To which service this characteristic descriptor ** is added to. ** perm : Characteristic value declaration attribute ** permission. ** p_descr_uuid : Characteristic descriptor UUID. ** ** Returns Characteristic descriptor attribute handle. 0 if add ** characteristic descriptor failed. ** *******************************************************************************/ extern UINT16 GATTS_AddCharDescriptor (UINT16 service_handle, tGATT_PERM perm, tBT_UUID * p_descr_uuid); /******************************************************************************* ** ** Function GATTS_DeleteService ** ** Description This function is called to delete a service. ** ** Parameter gatt_if : application interface ** p_svc_uuid : service UUID ** svc_inst : instance of the service inside the application ** ** Returns TRUE if operation succeed, FALSE if handle block was not found. ** *******************************************************************************/ extern BOOLEAN GATTS_DeleteService (tGATT_IF gatt_if, tBT_UUID *p_svc_uuid, UINT16 svc_inst); /******************************************************************************* ** ** Function GATTS_StartService ** ** Description This function is called to start a service with GATT ** ** Parameter gatt_if : service handle. ** p_cback : application service callback functions. ** sup_transport : supported transport(s) for this primary service ** ** return GATT_SUCCESS if sucessfully started; otherwise error code. ** *******************************************************************************/ extern tGATT_STATUS GATTS_StartService (tGATT_IF gatt_if, UINT16 service_handle, tGATT_TRANSPORT sup_transport); /******************************************************************************* ** ** Function GATTS_StopService ** ** Description This function is called to stop a service ** ** Parameter service_handle : this is the start handle of a service ** ** Returns None. ** *******************************************************************************/ extern void GATTS_StopService (UINT16 service_handle); /******************************************************************************* ** ** Function GATTs_HandleValueIndication ** ** Description This function sends a handle value indication to a client. ** ** Parameter conn_id: connection identifier. ** attr_handle: Attribute handle of this handle value indication. ** val_len: Length of the indicated attribute value. ** p_val: Pointer to the indicated attribute value data. ** ** Returns GATT_SUCCESS if sucessfully sent or queued; otherwise error code. ** *******************************************************************************/ extern tGATT_STATUS GATTS_HandleValueIndication (UINT16 conn_id, UINT16 attr_handle, UINT16 val_len, UINT8 *p_val); /******************************************************************************* ** ** Function GATTS_HandleValueNotification ** ** Description This function sends a handle value notification to a client. ** ** Parameter conn_id: connection identifier. ** attr_handle: Attribute handle of this handle value indication. ** val_len: Length of the indicated attribute value. ** p_val: Pointer to the indicated attribute value data. ** ** Returns GATT_SUCCESS if sucessfully sent; otherwise error code. ** *******************************************************************************/ extern tGATT_STATUS GATTS_HandleValueNotification (UINT16 conn_id, UINT16 attr_handle, UINT16 val_len, UINT8 *p_val); /******************************************************************************* ** ** Function GATTS_SendRsp ** ** Description This function sends the server response to client. ** ** Parameter conn_id: connection identifier. ** trans_id: transaction id ** status: response status ** p_msg: pointer to message parameters structure. ** ** Returns GATT_SUCCESS if sucessfully sent; otherwise error code. ** *******************************************************************************/ extern tGATT_STATUS GATTS_SendRsp (UINT16 conn_id, UINT32 trans_id, tGATT_STATUS status, tGATTS_RSP *p_msg); /*******************************************************************************/ /* GATT Profile Client Functions */ /*******************************************************************************/ /******************************************************************************* ** ** Function GATTC_ConfigureMTU ** ** Description This function is called to configure the ATT MTU size for ** a connection on an LE transport. ** ** Parameters conn_id: connection identifier. ** mtu - attribute MTU size.. ** ** Returns GATT_SUCCESS if command started successfully. ** *******************************************************************************/ extern tGATT_STATUS GATTC_ConfigureMTU (UINT16 conn_id, UINT16 mtu); /******************************************************************************* ** ** Function GATTC_Discover ** ** Description This function is called to do a discovery procedure on ATT server. ** ** Parameters conn_id: connection identifier. ** disc_type:discovery type. ** p_param: parameters of discovery requirement. ** ** Returns GATT_SUCCESS if command received/sent successfully. ** *******************************************************************************/ extern tGATT_STATUS GATTC_Discover (UINT16 conn_id, tGATT_DISC_TYPE disc_type, tGATT_DISC_PARAM *p_param ); /******************************************************************************* ** ** Function GATTC_Read ** ** Description This function is called to read the value of an attribute from ** the server. ** ** Parameters conn_id: connection identifier. ** type - attribute read type. ** p_read - read operation parameters. ** ** Returns GATT_SUCCESS if command started successfully. ** *******************************************************************************/ extern tGATT_STATUS GATTC_Read (UINT16 conn_id, tGATT_READ_TYPE type, tGATT_READ_PARAM *p_read); /******************************************************************************* ** ** Function GATTC_Write ** ** Description This function is called to read the value of an attribute from ** the server. ** ** Parameters conn_id: connection identifier. ** type - attribute write type. ** p_write - write operation parameters. ** ** Returns GATT_SUCCESS if command started successfully. ** *******************************************************************************/ extern tGATT_STATUS GATTC_Write (UINT16 conn_id, tGATT_WRITE_TYPE type, tGATT_VALUE *p_write); /******************************************************************************* ** ** Function GATTC_ExecuteWrite ** ** Description This function is called to send an Execute write request to ** the server. ** ** Parameters conn_id: connection identifier. ** is_execute - to execute or cancel the prepare write requet(s) ** ** Returns GATT_SUCCESS if command started successfully. ** *******************************************************************************/ extern tGATT_STATUS GATTC_ExecuteWrite (UINT16 conn_id, BOOLEAN is_execute); /******************************************************************************* ** ** Function GATTC_SendHandleValueConfirm ** ** Description This function is called to send a handle value confirmation ** as response to a handle value notification from server. ** ** Parameters conn_id: connection identifier. ** handle: the handle of the attribute confirmation. ** ** Returns GATT_SUCCESS if command started successfully. ** *******************************************************************************/ extern tGATT_STATUS GATTC_SendHandleValueConfirm (UINT16 conn_id, UINT16 handle); /******************************************************************************* ** ** Function GATT_SetIdleTimeout ** ** Description This function (common to both client and server) sets the idle ** timeout for a tansport connection ** ** Parameter bd_addr: target device bd address. ** idle_tout: timeout value in seconds. ** transport: trasnport option. ** ** Returns void ** *******************************************************************************/ extern void GATT_SetIdleTimeout (BD_ADDR bd_addr, UINT16 idle_tout, tGATT_TRANSPORT transport); /******************************************************************************* ** ** Function GATT_Register ** ** Description This function is called to register an application ** with GATT ** ** Parameter p_app_uuid128: Application UUID ** p_cb_info: callback functions. ** ** Returns 0 for error, otherwise the index of the client registered with GATT ** *******************************************************************************/ extern tGATT_IF GATT_Register (tBT_UUID *p_app_uuid128, tGATT_CBACK *p_cb_info); /******************************************************************************* ** ** Function GATT_Deregister ** ** Description This function deregistered the application from GATT. ** ** Parameters gatt_if: applicaiton interface. ** ** Returns None. ** *******************************************************************************/ extern void GATT_Deregister (tGATT_IF gatt_if); /******************************************************************************* ** ** Function GATT_StartIf ** ** Description This function is called after registration to start receiving ** callbacks for registered interface. Function may call back ** with connection status and queued notifications ** ** Parameter gatt_if: applicaiton interface. ** ** Returns None ** *******************************************************************************/ extern void GATT_StartIf (tGATT_IF gatt_if); /******************************************************************************* ** ** Function GATT_Connect ** ** Description This function initiate a connecttion to a remote device on GATT ** channel. ** ** Parameters gatt_if: applicaiton interface ** bd_addr: peer device address. ** is_direct: is a direct conenection or a background auto connection ** transport : Physical transport for GATT connection (BR/EDR or LE) ** ** Returns TRUE if connection started; FALSE if connection start failure. ** *******************************************************************************/ extern BOOLEAN GATT_Connect (tGATT_IF gatt_if, BD_ADDR bd_addr, BOOLEAN is_direct, tBT_TRANSPORT transport); /******************************************************************************* ** ** Function GATT_CancelConnect ** ** Description This function terminate the connection initaition to a remote ** device on GATT channel. ** ** Parameters gatt_if: client interface. If 0 used as unconditionally disconnect, ** typically used for direct connection cancellation. ** bd_addr: peer device address. ** is_direct: is a direct conenection or a background auto connection ** ** Returns TRUE if connection started; FALSE if connection start failure. ** *******************************************************************************/ extern BOOLEAN GATT_CancelConnect (tGATT_IF gatt_if, BD_ADDR bd_addr, BOOLEAN is_direct); /******************************************************************************* ** ** Function GATT_Disconnect ** ** Description This function disconnect the GATT channel for this registered ** application. ** ** Parameters conn_id: connection identifier. ** ** Returns GATT_SUCCESS if disconnected. ** *******************************************************************************/ extern tGATT_STATUS GATT_Disconnect (UINT16 conn_id); /******************************************************************************* ** ** Function GATT_GetConnectionInfor ** ** Description This function use conn_id to find its associated BD address and applciation ** interface ** ** Parameters conn_id: connection id (input) ** p_gatt_if: applicaiton interface (output) ** bd_addr: peer device address. (output) ** transport : physical transport of the GATT connection (BR/EDR or LE) ** ** Returns TRUE the ligical link information is found for conn_id ** *******************************************************************************/ extern BOOLEAN GATT_GetConnectionInfor(UINT16 conn_id, tGATT_IF *p_gatt_if, BD_ADDR bd_addr, tBT_TRANSPORT *p_transport); /******************************************************************************* ** ** Function GATT_GetConnIdIfConnected ** ** Description This function find the conn_id if the logical link for BD address ** and applciation interface is connected ** ** Parameters gatt_if: applicaiton interface (input) ** bd_addr: peer device address. (input) ** p_conn_id: connection id (output) ** transport : physical transport of the GATT connection (BR/EDR or LE) ** ** Returns TRUE the ligical link is connected ** *******************************************************************************/ extern BOOLEAN GATT_GetConnIdIfConnected(tGATT_IF gatt_if, BD_ADDR bd_addr, UINT16 *p_conn_id, tBT_TRANSPORT transport); /******************************************************************************* ** ** Function GATT_Listen ** ** Description This function start or stop LE advertisement and listen for ** connection. ** ** Parameters gatt_if: applicaiton interface ** p_bd_addr: listen for specific address connection, or NULL for ** listen to all device connection. ** start: is a direct conenection or a background auto connection ** ** Returns TRUE if advertisement is started; FALSE if adv start failure. ** *******************************************************************************/ extern BOOLEAN GATT_Listen (tGATT_IF gatt_if, BOOLEAN start, BD_ADDR_PTR bd_addr); /******************************************************************************* ** ** Function GATT_ConfigServiceChangeCCC ** ** Description Configure service change indication on remote device ** ** Returns None. ** *******************************************************************************/ extern void GATT_ConfigServiceChangeCCC (BD_ADDR remote_bda, BOOLEAN enable, tBT_TRANSPORT transport); #ifdef __cplusplus } #endif #endif /* GATT_API_H */