1 /* 2 * EAP peer configuration data 3 * Copyright (c) 2003-2013, Jouni Malinen <j@w1.fi> 4 * 5 * This software may be distributed under the terms of the BSD license. 6 * See README for more details. 7 */ 8 9 #ifndef EAP_CONFIG_H 10 #define EAP_CONFIG_H 11 12 /** 13 * struct eap_peer_config - EAP peer configuration/credentials 14 */ 15 struct eap_peer_config { 16 /** 17 * identity - EAP Identity 18 * 19 * This field is used to set the real user identity or NAI (for 20 * EAP-PSK/PAX/SAKE/GPSK). 21 */ 22 u8 *identity; 23 24 /** 25 * identity_len - EAP Identity length 26 */ 27 size_t identity_len; 28 29 /** 30 * anonymous_identity - Anonymous EAP Identity 31 * 32 * This field is used for unencrypted use with EAP types that support 33 * different tunnelled identity, e.g., EAP-TTLS, in order to reveal the 34 * real identity (identity field) only to the authentication server. 35 * 36 * If not set, the identity field will be used for both unencrypted and 37 * protected fields. 38 * 39 * This field can also be used with EAP-SIM/AKA/AKA' to store the 40 * pseudonym identity. 41 */ 42 u8 *anonymous_identity; 43 44 /** 45 * anonymous_identity_len - Length of anonymous_identity 46 */ 47 size_t anonymous_identity_len; 48 49 /** 50 * password - Password string for EAP 51 * 52 * This field can include either the plaintext password (default 53 * option) or a NtPasswordHash (16-byte MD4 hash of the unicode 54 * presentation of the password) if flags field has 55 * EAP_CONFIG_FLAGS_PASSWORD_NTHASH bit set to 1. NtPasswordHash can 56 * only be used with authentication mechanism that use this hash as the 57 * starting point for operation: MSCHAP and MSCHAPv2 (EAP-MSCHAPv2, 58 * EAP-TTLS/MSCHAPv2, EAP-TTLS/MSCHAP, LEAP). 59 * 60 * In addition, this field is used to configure a pre-shared key for 61 * EAP-PSK/PAX/SAKE/GPSK. The length of the PSK must be 16 for EAP-PSK 62 * and EAP-PAX and 32 for EAP-SAKE. EAP-GPSK can use a variable length 63 * PSK. 64 */ 65 u8 *password; 66 67 /** 68 * password_len - Length of password field 69 */ 70 size_t password_len; 71 72 /** 73 * ca_cert - File path to CA certificate file (PEM/DER) 74 * 75 * This file can have one or more trusted CA certificates. If ca_cert 76 * and ca_path are not included, server certificate will not be 77 * verified. This is insecure and a trusted CA certificate should 78 * always be configured when using EAP-TLS/TTLS/PEAP. Full path to the 79 * file should be used since working directory may change when 80 * wpa_supplicant is run in the background. 81 * 82 * Alternatively, a named configuration blob can be used by setting 83 * this to blob://blob_name. 84 * 85 * Alternatively, this can be used to only perform matching of the 86 * server certificate (SHA-256 hash of the DER encoded X.509 87 * certificate). In this case, the possible CA certificates in the 88 * server certificate chain are ignored and only the server certificate 89 * is verified. This is configured with the following format: 90 * hash:://server/sha256/cert_hash_in_hex 91 * For example: "hash://server/sha256/ 92 * 5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" 93 * 94 * On Windows, trusted CA certificates can be loaded from the system 95 * certificate store by setting this to cert_store://name, e.g., 96 * ca_cert="cert_store://CA" or ca_cert="cert_store://ROOT". 97 * Note that when running wpa_supplicant as an application, the user 98 * certificate store (My user account) is used, whereas computer store 99 * (Computer account) is used when running wpasvc as a service. 100 */ 101 u8 *ca_cert; 102 103 /** 104 * ca_path - Directory path for CA certificate files (PEM) 105 * 106 * This path may contain multiple CA certificates in OpenSSL format. 107 * Common use for this is to point to system trusted CA list which is 108 * often installed into directory like /etc/ssl/certs. If configured, 109 * these certificates are added to the list of trusted CAs. ca_cert 110 * may also be included in that case, but it is not required. 111 */ 112 u8 *ca_path; 113 114 /** 115 * client_cert - File path to client certificate file (PEM/DER) 116 * 117 * This field is used with EAP method that use TLS authentication. 118 * Usually, this is only configured for EAP-TLS, even though this could 119 * in theory be used with EAP-TTLS and EAP-PEAP, too. Full path to the 120 * file should be used since working directory may change when 121 * wpa_supplicant is run in the background. 122 * 123 * Alternatively, a named configuration blob can be used by setting 124 * this to blob://blob_name. 125 */ 126 u8 *client_cert; 127 128 /** 129 * private_key - File path to client private key file (PEM/DER/PFX) 130 * 131 * When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be 132 * commented out. Both the private key and certificate will be read 133 * from the PKCS#12 file in this case. Full path to the file should be 134 * used since working directory may change when wpa_supplicant is run 135 * in the background. 136 * 137 * Windows certificate store can be used by leaving client_cert out and 138 * configuring private_key in one of the following formats: 139 * 140 * cert://substring_to_match 141 * 142 * hash://certificate_thumbprint_in_hex 143 * 144 * For example: private_key="hash://63093aa9c47f56ae88334c7b65a4" 145 * 146 * Note that when running wpa_supplicant as an application, the user 147 * certificate store (My user account) is used, whereas computer store 148 * (Computer account) is used when running wpasvc as a service. 149 * 150 * Alternatively, a named configuration blob can be used by setting 151 * this to blob://blob_name. 152 */ 153 u8 *private_key; 154 155 /** 156 * private_key_passwd - Password for private key file 157 * 158 * If left out, this will be asked through control interface. 159 */ 160 char *private_key_passwd; 161 162 /** 163 * dh_file - File path to DH/DSA parameters file (in PEM format) 164 * 165 * This is an optional configuration file for setting parameters for an 166 * ephemeral DH key exchange. In most cases, the default RSA 167 * authentication does not use this configuration. However, it is 168 * possible setup RSA to use ephemeral DH key exchange. In addition, 169 * ciphers with DSA keys always use ephemeral DH keys. This can be used 170 * to achieve forward secrecy. If the file is in DSA parameters format, 171 * it will be automatically converted into DH params. Full path to the 172 * file should be used since working directory may change when 173 * wpa_supplicant is run in the background. 174 * 175 * Alternatively, a named configuration blob can be used by setting 176 * this to blob://blob_name. 177 */ 178 u8 *dh_file; 179 180 /** 181 * subject_match - Constraint for server certificate subject 182 * 183 * This substring is matched against the subject of the authentication 184 * server certificate. If this string is set, the server sertificate is 185 * only accepted if it contains this string in the subject. The subject 186 * string is in following format: 187 * 188 * /C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@n.example.com 189 * 190 * Note: Since this is a substring match, this cannot be used securily 191 * to do a suffix match against a possible domain name in the CN entry. 192 * For such a use case, domain_suffix_match should be used instead. 193 */ 194 u8 *subject_match; 195 196 /** 197 * altsubject_match - Constraint for server certificate alt. subject 198 * 199 * Semicolon separated string of entries to be matched against the 200 * alternative subject name of the authentication server certificate. 201 * If this string is set, the server sertificate is only accepted if it 202 * contains one of the entries in an alternative subject name 203 * extension. 204 * 205 * altSubjectName string is in following format: TYPE:VALUE 206 * 207 * Example: EMAIL:server@example.com 208 * Example: DNS:server.example.com;DNS:server2.example.com 209 * 210 * Following types are supported: EMAIL, DNS, URI 211 */ 212 u8 *altsubject_match; 213 214 /** 215 * domain_suffix_match - Constraint for server domain name 216 * 217 * If set, this FQDN is used as a suffix match requirement for the 218 * server certificate in SubjectAltName dNSName element(s). If a 219 * matching dNSName is found, this constraint is met. If no dNSName 220 * values are present, this constraint is matched against SubjectName CN 221 * using same suffix match comparison. Suffix match here means that the 222 * host/domain name is compared one label at a time starting from the 223 * top-level domain and all the labels in domain_suffix_match shall be 224 * included in the certificate. The certificate may include additional 225 * sub-level labels in addition to the required labels. 226 * 227 * For example, domain_suffix_match=example.com would match 228 * test.example.com but would not match test-example.com. 229 */ 230 char *domain_suffix_match; 231 232 /** 233 * domain_match - Constraint for server domain name 234 * 235 * If set, this FQDN is used as a full match requirement for the 236 * server certificate in SubjectAltName dNSName element(s). If a 237 * matching dNSName is found, this constraint is met. If no dNSName 238 * values are present, this constraint is matched against SubjectName CN 239 * using same full match comparison. This behavior is similar to 240 * domain_suffix_match, but has the requirement of a full match, i.e., 241 * no subdomains or wildcard matches are allowed. Case-insensitive 242 * comparison is used, so "Example.com" matches "example.com", but would 243 * not match "test.Example.com". 244 */ 245 char *domain_match; 246 247 /** 248 * ca_cert2 - File path to CA certificate file (PEM/DER) (Phase 2) 249 * 250 * This file can have one or more trusted CA certificates. If ca_cert2 251 * and ca_path2 are not included, server certificate will not be 252 * verified. This is insecure and a trusted CA certificate should 253 * always be configured. Full path to the file should be used since 254 * working directory may change when wpa_supplicant is run in the 255 * background. 256 * 257 * This field is like ca_cert, but used for phase 2 (inside 258 * EAP-TTLS/PEAP/FAST tunnel) authentication. 259 * 260 * Alternatively, a named configuration blob can be used by setting 261 * this to blob://blob_name. 262 */ 263 u8 *ca_cert2; 264 265 /** 266 * ca_path2 - Directory path for CA certificate files (PEM) (Phase 2) 267 * 268 * This path may contain multiple CA certificates in OpenSSL format. 269 * Common use for this is to point to system trusted CA list which is 270 * often installed into directory like /etc/ssl/certs. If configured, 271 * these certificates are added to the list of trusted CAs. ca_cert 272 * may also be included in that case, but it is not required. 273 * 274 * This field is like ca_path, but used for phase 2 (inside 275 * EAP-TTLS/PEAP/FAST tunnel) authentication. 276 */ 277 u8 *ca_path2; 278 279 /** 280 * client_cert2 - File path to client certificate file 281 * 282 * This field is like client_cert, but used for phase 2 (inside 283 * EAP-TTLS/PEAP/FAST tunnel) authentication. Full path to the 284 * file should be used since working directory may change when 285 * wpa_supplicant is run in the background. 286 * 287 * Alternatively, a named configuration blob can be used by setting 288 * this to blob://blob_name. 289 */ 290 u8 *client_cert2; 291 292 /** 293 * private_key2 - File path to client private key file 294 * 295 * This field is like private_key, but used for phase 2 (inside 296 * EAP-TTLS/PEAP/FAST tunnel) authentication. Full path to the 297 * file should be used since working directory may change when 298 * wpa_supplicant is run in the background. 299 * 300 * Alternatively, a named configuration blob can be used by setting 301 * this to blob://blob_name. 302 */ 303 u8 *private_key2; 304 305 /** 306 * private_key2_passwd - Password for private key file 307 * 308 * This field is like private_key_passwd, but used for phase 2 (inside 309 * EAP-TTLS/PEAP/FAST tunnel) authentication. 310 */ 311 char *private_key2_passwd; 312 313 /** 314 * dh_file2 - File path to DH/DSA parameters file (in PEM format) 315 * 316 * This field is like dh_file, but used for phase 2 (inside 317 * EAP-TTLS/PEAP/FAST tunnel) authentication. Full path to the 318 * file should be used since working directory may change when 319 * wpa_supplicant is run in the background. 320 * 321 * Alternatively, a named configuration blob can be used by setting 322 * this to blob://blob_name. 323 */ 324 u8 *dh_file2; 325 326 /** 327 * subject_match2 - Constraint for server certificate subject 328 * 329 * This field is like subject_match, but used for phase 2 (inside 330 * EAP-TTLS/PEAP/FAST tunnel) authentication. 331 */ 332 u8 *subject_match2; 333 334 /** 335 * altsubject_match2 - Constraint for server certificate alt. subject 336 * 337 * This field is like altsubject_match, but used for phase 2 (inside 338 * EAP-TTLS/PEAP/FAST tunnel) authentication. 339 */ 340 u8 *altsubject_match2; 341 342 /** 343 * domain_suffix_match2 - Constraint for server domain name 344 * 345 * This field is like domain_suffix_match, but used for phase 2 (inside 346 * EAP-TTLS/PEAP/FAST tunnel) authentication. 347 */ 348 char *domain_suffix_match2; 349 350 /** 351 * domain_match2 - Constraint for server domain name 352 * 353 * This field is like domain_match, but used for phase 2 (inside 354 * EAP-TTLS/PEAP/FAST tunnel) authentication. 355 */ 356 char *domain_match2; 357 358 /** 359 * eap_methods - Allowed EAP methods 360 * 361 * (vendor=EAP_VENDOR_IETF,method=EAP_TYPE_NONE) terminated list of 362 * allowed EAP methods or %NULL if all methods are accepted. 363 */ 364 struct eap_method_type *eap_methods; 365 366 /** 367 * phase1 - Phase 1 (outer authentication) parameters 368 * 369 * String with field-value pairs, e.g., "peapver=0" or 370 * "peapver=1 peaplabel=1". 371 * 372 * 'peapver' can be used to force which PEAP version (0 or 1) is used. 373 * 374 * 'peaplabel=1' can be used to force new label, "client PEAP 375 * encryption", to be used during key derivation when PEAPv1 or newer. 376 * 377 * Most existing PEAPv1 implementation seem to be using the old label, 378 * "client EAP encryption", and wpa_supplicant is now using that as the 379 * default value. 380 * 381 * Some servers, e.g., Radiator, may require peaplabel=1 configuration 382 * to interoperate with PEAPv1; see eap_testing.txt for more details. 383 * 384 * 'peap_outer_success=0' can be used to terminate PEAP authentication 385 * on tunneled EAP-Success. This is required with some RADIUS servers 386 * that implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g., 387 * Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode). 388 * 389 * include_tls_length=1 can be used to force wpa_supplicant to include 390 * TLS Message Length field in all TLS messages even if they are not 391 * fragmented. 392 * 393 * sim_min_num_chal=3 can be used to configure EAP-SIM to require three 394 * challenges (by default, it accepts 2 or 3). 395 * 396 * result_ind=1 can be used to enable EAP-SIM and EAP-AKA to use 397 * protected result indication. 398 * 399 * fast_provisioning option can be used to enable in-line provisioning 400 * of EAP-FAST credentials (PAC): 401 * 0 = disabled, 402 * 1 = allow unauthenticated provisioning, 403 * 2 = allow authenticated provisioning, 404 * 3 = allow both unauthenticated and authenticated provisioning 405 * 406 * fast_max_pac_list_len=num option can be used to set the maximum 407 * number of PAC entries to store in a PAC list (default: 10). 408 * 409 * fast_pac_format=binary option can be used to select binary format 410 * for storing PAC entries in order to save some space (the default 411 * text format uses about 2.5 times the size of minimal binary format). 412 * 413 * crypto_binding option can be used to control PEAPv0 cryptobinding 414 * behavior: 415 * 0 = do not use cryptobinding (default) 416 * 1 = use cryptobinding if server supports it 417 * 2 = require cryptobinding 418 * 419 * EAP-WSC (WPS) uses following options: pin=Device_Password and 420 * uuid=Device_UUID 421 * 422 * For wired IEEE 802.1X authentication, "allow_canned_success=1" can be 423 * used to configure a mode that allows EAP-Success (and EAP-Failure) 424 * without going through authentication step. Some switches use such 425 * sequence when forcing the port to be authorized/unauthorized or as a 426 * fallback option if the authentication server is unreachable. By 427 * default, wpa_supplicant discards such frames to protect against 428 * potential attacks by rogue devices, but this option can be used to 429 * disable that protection for cases where the server/authenticator does 430 * not need to be authenticated. 431 */ 432 char *phase1; 433 434 /** 435 * phase2 - Phase2 (inner authentication with TLS tunnel) parameters 436 * 437 * String with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or 438 * "autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS. "mschapv2_retry=0" can 439 * be used to disable MSCHAPv2 password retry in authentication failure 440 * cases. 441 */ 442 char *phase2; 443 444 /** 445 * pcsc - Parameters for PC/SC smartcard interface for USIM and GSM SIM 446 * 447 * This field is used to configure PC/SC smartcard interface. 448 * Currently, the only configuration is whether this field is %NULL (do 449 * not use PC/SC) or non-NULL (e.g., "") to enable PC/SC. 450 * 451 * This field is used for EAP-SIM and EAP-AKA. 452 */ 453 char *pcsc; 454 455 /** 456 * pin - PIN for USIM, GSM SIM, and smartcards 457 * 458 * This field is used to configure PIN for SIM and smartcards for 459 * EAP-SIM and EAP-AKA. In addition, this is used with EAP-TLS if a 460 * smartcard is used for private key operations. 461 * 462 * If left out, this will be asked through control interface. 463 */ 464 char *pin; 465 466 /** 467 * engine - Enable OpenSSL engine (e.g., for smartcard access) 468 * 469 * This is used if private key operations for EAP-TLS are performed 470 * using a smartcard. 471 */ 472 int engine; 473 474 /** 475 * engine_id - Engine ID for OpenSSL engine 476 * 477 * "opensc" to select OpenSC engine or "pkcs11" to select PKCS#11 478 * engine. 479 * 480 * This is used if private key operations for EAP-TLS are performed 481 * using a smartcard. 482 */ 483 char *engine_id; 484 485 /** 486 * engine2 - Enable OpenSSL engine (e.g., for smartcard) (Phase 2) 487 * 488 * This is used if private key operations for EAP-TLS are performed 489 * using a smartcard. 490 * 491 * This field is like engine, but used for phase 2 (inside 492 * EAP-TTLS/PEAP/FAST tunnel) authentication. 493 */ 494 int engine2; 495 496 497 /** 498 * pin2 - PIN for USIM, GSM SIM, and smartcards (Phase 2) 499 * 500 * This field is used to configure PIN for SIM and smartcards for 501 * EAP-SIM and EAP-AKA. In addition, this is used with EAP-TLS if a 502 * smartcard is used for private key operations. 503 * 504 * This field is like pin2, but used for phase 2 (inside 505 * EAP-TTLS/PEAP/FAST tunnel) authentication. 506 * 507 * If left out, this will be asked through control interface. 508 */ 509 char *pin2; 510 511 /** 512 * engine2_id - Engine ID for OpenSSL engine (Phase 2) 513 * 514 * "opensc" to select OpenSC engine or "pkcs11" to select PKCS#11 515 * engine. 516 * 517 * This is used if private key operations for EAP-TLS are performed 518 * using a smartcard. 519 * 520 * This field is like engine_id, but used for phase 2 (inside 521 * EAP-TTLS/PEAP/FAST tunnel) authentication. 522 */ 523 char *engine2_id; 524 525 526 /** 527 * key_id - Key ID for OpenSSL engine 528 * 529 * This is used if private key operations for EAP-TLS are performed 530 * using a smartcard. 531 */ 532 char *key_id; 533 534 /** 535 * cert_id - Cert ID for OpenSSL engine 536 * 537 * This is used if the certificate operations for EAP-TLS are performed 538 * using a smartcard. 539 */ 540 char *cert_id; 541 542 /** 543 * ca_cert_id - CA Cert ID for OpenSSL engine 544 * 545 * This is used if the CA certificate for EAP-TLS is on a smartcard. 546 */ 547 char *ca_cert_id; 548 549 /** 550 * key2_id - Key ID for OpenSSL engine (phase2) 551 * 552 * This is used if private key operations for EAP-TLS are performed 553 * using a smartcard. 554 */ 555 char *key2_id; 556 557 /** 558 * cert2_id - Cert ID for OpenSSL engine (phase2) 559 * 560 * This is used if the certificate operations for EAP-TLS are performed 561 * using a smartcard. 562 */ 563 char *cert2_id; 564 565 /** 566 * ca_cert2_id - CA Cert ID for OpenSSL engine (phase2) 567 * 568 * This is used if the CA certificate for EAP-TLS is on a smartcard. 569 */ 570 char *ca_cert2_id; 571 572 /** 573 * otp - One-time-password 574 * 575 * This field should not be set in configuration step. It is only used 576 * internally when OTP is entered through the control interface. 577 */ 578 u8 *otp; 579 580 /** 581 * otp_len - Length of the otp field 582 */ 583 size_t otp_len; 584 585 /** 586 * pending_req_identity - Whether there is a pending identity request 587 * 588 * This field should not be set in configuration step. It is only used 589 * internally when control interface is used to request needed 590 * information. 591 */ 592 int pending_req_identity; 593 594 /** 595 * pending_req_password - Whether there is a pending password request 596 * 597 * This field should not be set in configuration step. It is only used 598 * internally when control interface is used to request needed 599 * information. 600 */ 601 int pending_req_password; 602 603 /** 604 * pending_req_pin - Whether there is a pending PIN request 605 * 606 * This field should not be set in configuration step. It is only used 607 * internally when control interface is used to request needed 608 * information. 609 */ 610 int pending_req_pin; 611 612 /** 613 * pending_req_new_password - Pending password update request 614 * 615 * This field should not be set in configuration step. It is only used 616 * internally when control interface is used to request needed 617 * information. 618 */ 619 int pending_req_new_password; 620 621 /** 622 * pending_req_passphrase - Pending passphrase request 623 * 624 * This field should not be set in configuration step. It is only used 625 * internally when control interface is used to request needed 626 * information. 627 */ 628 int pending_req_passphrase; 629 630 /** 631 * pending_req_otp - Whether there is a pending OTP request 632 * 633 * This field should not be set in configuration step. It is only used 634 * internally when control interface is used to request needed 635 * information. 636 */ 637 char *pending_req_otp; 638 639 /** 640 * pending_req_otp_len - Length of the pending OTP request 641 */ 642 size_t pending_req_otp_len; 643 644 /** 645 * pac_file - File path or blob name for the PAC entries (EAP-FAST) 646 * 647 * wpa_supplicant will need to be able to create this file and write 648 * updates to it when PAC is being provisioned or refreshed. Full path 649 * to the file should be used since working directory may change when 650 * wpa_supplicant is run in the background. 651 * Alternatively, a named configuration blob can be used by setting 652 * this to blob://blob_name. 653 */ 654 char *pac_file; 655 656 /** 657 * mschapv2_retry - MSCHAPv2 retry in progress 658 * 659 * This field is used internally by EAP-MSCHAPv2 and should not be set 660 * as part of configuration. 661 */ 662 int mschapv2_retry; 663 664 /** 665 * new_password - New password for password update 666 * 667 * This field is used during MSCHAPv2 password update. This is normally 668 * requested from the user through the control interface and not set 669 * from configuration. 670 */ 671 u8 *new_password; 672 673 /** 674 * new_password_len - Length of new_password field 675 */ 676 size_t new_password_len; 677 678 /** 679 * fragment_size - Maximum EAP fragment size in bytes (default 1398) 680 * 681 * This value limits the fragment size for EAP methods that support 682 * fragmentation (e.g., EAP-TLS and EAP-PEAP). This value should be set 683 * small enough to make the EAP messages fit in MTU of the network 684 * interface used for EAPOL. The default value is suitable for most 685 * cases. 686 */ 687 int fragment_size; 688 689 #define EAP_CONFIG_FLAGS_PASSWORD_NTHASH BIT(0) 690 #define EAP_CONFIG_FLAGS_EXT_PASSWORD BIT(1) 691 /** 692 * flags - Network configuration flags (bitfield) 693 * 694 * This variable is used for internal flags to describe further details 695 * for the network parameters. 696 * bit 0 = password is represented as a 16-byte NtPasswordHash value 697 * instead of plaintext password 698 * bit 1 = password is stored in external storage; the value in the 699 * password field is the name of that external entry 700 */ 701 u32 flags; 702 703 /** 704 * ocsp - Whether to use/require OCSP to check server certificate 705 * 706 * 0 = do not use OCSP stapling (TLS certificate status extension) 707 * 1 = try to use OCSP stapling, but not require response 708 * 2 = require valid OCSP stapling response 709 */ 710 int ocsp; 711 712 /** 713 * external_sim_resp - Response from external SIM processing 714 * 715 * This field should not be set in configuration step. It is only used 716 * internally when control interface is used to request external 717 * SIM/USIM processing. 718 */ 719 char *external_sim_resp; 720 721 /** 722 * sim_num - User selected SIM identifier 723 * 724 * This variable is used for identifying which SIM is used if the system 725 * has more than one. 726 */ 727 int sim_num; 728 729 /** 730 * openssl_ciphers - OpenSSL cipher string 731 * 732 * This is an OpenSSL specific configuration option for configuring the 733 * ciphers for this connection. If not set, the default cipher suite 734 * list is used. 735 */ 736 char *openssl_ciphers; 737 738 /** 739 * erp - Whether EAP Re-authentication Protocol (ERP) is enabled 740 */ 741 int erp; 742 743 /** 744 * pending_ext_cert_check - External server certificate check status 745 * 746 * This field should not be set in configuration step. It is only used 747 * internally when control interface is used to request external 748 * validation of server certificate chain. 749 */ 750 enum { 751 NO_CHECK = 0, 752 PENDING_CHECK, 753 EXT_CERT_CHECK_GOOD, 754 EXT_CERT_CHECK_BAD, 755 } pending_ext_cert_check; 756 }; 757 758 759 /** 760 * struct wpa_config_blob - Named configuration blob 761 * 762 * This data structure is used to provide storage for binary objects to store 763 * abstract information like certificates and private keys inlined with the 764 * configuration data. 765 */ 766 struct wpa_config_blob { 767 /** 768 * name - Blob name 769 */ 770 char *name; 771 772 /** 773 * data - Pointer to binary data 774 */ 775 u8 *data; 776 777 /** 778 * len - Length of binary data 779 */ 780 size_t len; 781 782 /** 783 * next - Pointer to next blob in the configuration 784 */ 785 struct wpa_config_blob *next; 786 }; 787 788 #endif /* EAP_CONFIG_H */ 789