• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * Copyright (c) 1994, 1995, 1996
3  *	The Regents of the University of California.  All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  * 3. All advertising materials mentioning features or use of this software
14  *    must display the following acknowledgement:
15  *	This product includes software developed by the Computer Systems
16  *	Engineering Group at Lawrence Berkeley Laboratory.
17  * 4. Neither the name of the University nor of the Laboratory may be used
18  *    to endorse or promote products derived from this software without
19  *    specific prior written permission.
20  *
21  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
22  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
25  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31  * SUCH DAMAGE.
32  */
33 
34 #ifndef pcap_int_h
35 #define	pcap_int_h
36 
37 #include <pcap/pcap.h>
38 
39 #ifdef __cplusplus
40 extern "C" {
41 #endif
42 
43 #ifdef WIN32
44 #include <Packet32.h>
45 extern CRITICAL_SECTION g_PcapCompileCriticalSection;
46 #endif /* WIN32 */
47 
48 #ifdef MSDOS
49 #include <fcntl.h>
50 #include <io.h>
51 #endif
52 
53 #if (defined(_MSC_VER) && (_MSC_VER <= 1200)) /* we are compiling with Visual Studio 6, that doesn't support the LL suffix*/
54 
55 /*
56  * Swap byte ordering of unsigned long long timestamp on a big endian
57  * machine.
58  */
59 #define SWAPLL(ull)  ((ull & 0xff00000000000000) >> 56) | \
60                       ((ull & 0x00ff000000000000) >> 40) | \
61                       ((ull & 0x0000ff0000000000) >> 24) | \
62                       ((ull & 0x000000ff00000000) >> 8)  | \
63                       ((ull & 0x00000000ff000000) << 8)  | \
64                       ((ull & 0x0000000000ff0000) << 24) | \
65                       ((ull & 0x000000000000ff00) << 40) | \
66                       ((ull & 0x00000000000000ff) << 56)
67 
68 #else /* A recent Visual studio compiler or not VC */
69 
70 /*
71  * Swap byte ordering of unsigned long long timestamp on a big endian
72  * machine.
73  */
74 #define SWAPLL(ull)  ((ull & 0xff00000000000000LL) >> 56) | \
75                       ((ull & 0x00ff000000000000LL) >> 40) | \
76                       ((ull & 0x0000ff0000000000LL) >> 24) | \
77                       ((ull & 0x000000ff00000000LL) >> 8)  | \
78                       ((ull & 0x00000000ff000000LL) << 8)  | \
79                       ((ull & 0x0000000000ff0000LL) << 24) | \
80                       ((ull & 0x000000000000ff00LL) << 40) | \
81                       ((ull & 0x00000000000000ffLL) << 56)
82 
83 #endif /* _MSC_VER */
84 
85 /*
86  * Maximum snapshot length.
87  *
88  * Somewhat arbitrary, but chosen to be:
89  *
90  *    1) big enough for maximum-size Linux loopback packets (65549)
91  *       and some USB packets captured with USBPcap:
92  *
93  *           http://desowin.org/usbpcap/
94  *
95  *       (> 131072, < 262144)
96  *
97  * and
98  *
99  *    2) small enough not to cause attempts to allocate huge amounts of
100  *       memory; some applications might use the snapshot length in a
101  *       savefile header to control the size of the buffer they allocate,
102  *       so a size of, say, 2^31-1 might not work well.
103  *
104  * We don't enforce this in pcap_set_snaplen(), but we use it internally.
105  */
106 #define MAXIMUM_SNAPLEN		262144
107 
108 struct pcap_opt {
109 	char	*source;
110 	int	timeout;	/* timeout for buffering */
111 	int	buffer_size;
112 	int	promisc;
113 	int	rfmon;		/* monitor mode */
114 	int	immediate;	/* immediate mode - deliver packets as soon as they arrive */
115 	int	tstamp_type;
116 	int	tstamp_precision;
117 };
118 
119 typedef int	(*activate_op_t)(pcap_t *);
120 typedef int	(*can_set_rfmon_op_t)(pcap_t *);
121 typedef int	(*read_op_t)(pcap_t *, int cnt, pcap_handler, u_char *);
122 typedef int	(*inject_op_t)(pcap_t *, const void *, size_t);
123 typedef int	(*setfilter_op_t)(pcap_t *, struct bpf_program *);
124 typedef int	(*setdirection_op_t)(pcap_t *, pcap_direction_t);
125 typedef int	(*set_datalink_op_t)(pcap_t *, int);
126 typedef int	(*getnonblock_op_t)(pcap_t *, char *);
127 typedef int	(*setnonblock_op_t)(pcap_t *, int, char *);
128 typedef int	(*stats_op_t)(pcap_t *, struct pcap_stat *);
129 #ifdef WIN32
130 typedef int	(*setbuff_op_t)(pcap_t *, int);
131 typedef int	(*setmode_op_t)(pcap_t *, int);
132 typedef int	(*setmintocopy_op_t)(pcap_t *, int);
133 typedef Adapter *(*getadapter_op_t)(pcap_t *);
134 #endif
135 typedef void	(*cleanup_op_t)(pcap_t *);
136 
137 /*
138  * We put all the stuff used in the read code path at the beginning,
139  * to try to keep it together in the same cache line or lines.
140  */
141 struct pcap {
142 	/*
143 	 * Method to call to read packets on a live capture.
144 	 */
145 	read_op_t read_op;
146 
147 	/*
148 	 * Method to call to read to read packets from a savefile.
149 	 */
150 	int (*next_packet_op)(pcap_t *, struct pcap_pkthdr *, u_char **);
151 
152 #ifdef WIN32
153 	ADAPTER *adapter;
154 	LPPACKET Packet;
155 	int nonblock;
156 #else
157 	int fd;
158 	int selectable_fd;
159 #endif /* WIN32 */
160 
161 	/*
162 	 * Read buffer.
163 	 */
164 	int bufsize;
165 	u_char *buffer;
166 	u_char *bp;
167 	int cc;
168 
169 	int break_loop;		/* flag set to force break from packet-reading loop */
170 
171 	void *priv;		/* private data for methods */
172 
173 	int swapped;
174 	FILE *rfile;		/* null if live capture, non-null if savefile */
175 	int fddipad;
176 	struct pcap *next;	/* list of open pcaps that need stuff cleared on close */
177 
178 	/*
179 	 * File version number; meaningful only for a savefile, but we
180 	 * keep it here so that apps that (mistakenly) ask for the
181 	 * version numbers will get the same zero values that they
182 	 * always did.
183 	 */
184 	int version_major;
185 	int version_minor;
186 
187 	int snapshot;
188 	int linktype;		/* Network linktype */
189 	int linktype_ext;       /* Extended information stored in the linktype field of a file */
190 	int tzoff;		/* timezone offset */
191 	int offset;		/* offset for proper alignment */
192 	int activated;		/* true if the capture is really started */
193 	int oldstyle;		/* if we're opening with pcap_open_live() */
194 
195 	struct pcap_opt opt;
196 
197 	/*
198 	 * Place holder for pcap_next().
199 	 */
200 	u_char *pkt;
201 
202 	/* We're accepting only packets in this direction/these directions. */
203 	pcap_direction_t direction;
204 
205 	/*
206 	 * Flags to affect BPF code generation.
207 	 */
208 	int bpf_codegen_flags;
209 
210 	/*
211 	 * Placeholder for filter code if bpf not in kernel.
212 	 */
213 	struct bpf_program fcode;
214 
215 	char errbuf[PCAP_ERRBUF_SIZE + 1];
216 	int dlt_count;
217 	u_int *dlt_list;
218 	int tstamp_type_count;
219 	u_int *tstamp_type_list;
220 	int tstamp_precision_count;
221 	u_int *tstamp_precision_list;
222 
223 	struct pcap_pkthdr pcap_header;	/* This is needed for the pcap_next_ex() to work */
224 
225 	/*
226 	 * More methods.
227 	 */
228 	activate_op_t activate_op;
229 	can_set_rfmon_op_t can_set_rfmon_op;
230 	inject_op_t inject_op;
231 	setfilter_op_t setfilter_op;
232 	setdirection_op_t setdirection_op;
233 	set_datalink_op_t set_datalink_op;
234 	getnonblock_op_t getnonblock_op;
235 	setnonblock_op_t setnonblock_op;
236 	stats_op_t stats_op;
237 
238 	/*
239 	 * Routine to use as callback for pcap_next()/pcap_next_ex().
240 	 */
241 	pcap_handler oneshot_callback;
242 
243 #ifdef WIN32
244 	/*
245 	 * These are, at least currently, specific to the Win32 NPF
246 	 * driver.
247 	 */
248 	setbuff_op_t setbuff_op;
249 	setmode_op_t setmode_op;
250 	setmintocopy_op_t setmintocopy_op;
251 	getadapter_op_t getadapter_op;
252 #endif
253 	cleanup_op_t cleanup_op;
254 };
255 
256 /*
257  * BPF code generation flags.
258  */
259 #define BPF_SPECIAL_VLAN_HANDLING	0x00000001	/* special VLAN handling for Linux */
260 
261 /*
262  * This is a timeval as stored in a savefile.
263  * It has to use the same types everywhere, independent of the actual
264  * `struct timeval'; `struct timeval' has 32-bit tv_sec values on some
265  * platforms and 64-bit tv_sec values on other platforms, and writing
266  * out native `struct timeval' values would mean files could only be
267  * read on systems with the same tv_sec size as the system on which
268  * the file was written.
269  */
270 
271 struct pcap_timeval {
272     bpf_int32 tv_sec;		/* seconds */
273     bpf_int32 tv_usec;		/* microseconds */
274 };
275 
276 /*
277  * This is a `pcap_pkthdr' as actually stored in a savefile.
278  *
279  * Do not change the format of this structure, in any way (this includes
280  * changes that only affect the length of fields in this structure),
281  * and do not make the time stamp anything other than seconds and
282  * microseconds (e.g., seconds and nanoseconds).  Instead:
283  *
284  *	introduce a new structure for the new format;
285  *
286  *	send mail to "tcpdump-workers@lists.tcpdump.org", requesting
287  *	a new magic number for your new capture file format, and, when
288  *	you get the new magic number, put it in "savefile.c";
289  *
290  *	use that magic number for save files with the changed record
291  *	header;
292  *
293  *	make the code in "savefile.c" capable of reading files with
294  *	the old record header as well as files with the new record header
295  *	(using the magic number to determine the header format).
296  *
297  * Then supply the changes by forking the branch at
298  *
299  *	https://github.com/the-tcpdump-group/libpcap/issues
300  *
301  * and issuing a pull request, so that future versions of libpcap and
302  * programs that use it (such as tcpdump) will be able to read your new
303  * capture file format.
304  */
305 
306 struct pcap_sf_pkthdr {
307     struct pcap_timeval ts;	/* time stamp */
308     bpf_u_int32 caplen;		/* length of portion present */
309     bpf_u_int32 len;		/* length this packet (off wire) */
310 };
311 
312 /*
313  * How a `pcap_pkthdr' is actually stored in savefiles written
314  * by some patched versions of libpcap (e.g. the ones in Red
315  * Hat Linux 6.1 and 6.2).
316  *
317  * Do not change the format of this structure, in any way (this includes
318  * changes that only affect the length of fields in this structure).
319  * Instead, introduce a new structure, as per the above.
320  */
321 
322 struct pcap_sf_patched_pkthdr {
323     struct pcap_timeval ts;	/* time stamp */
324     bpf_u_int32 caplen;		/* length of portion present */
325     bpf_u_int32 len;		/* length this packet (off wire) */
326     int		index;
327     unsigned short protocol;
328     unsigned char pkt_type;
329 };
330 
331 /*
332  * User data structure for the one-shot callback used for pcap_next()
333  * and pcap_next_ex().
334  */
335 struct oneshot_userdata {
336 	struct pcap_pkthdr *hdr;
337 	const u_char **pkt;
338 	pcap_t *pd;
339 };
340 
341 int	yylex(void);
342 
343 #ifndef min
344 #define min(a, b) ((a) > (b) ? (b) : (a))
345 #endif
346 
347 /* XXX should these be in pcap.h? */
348 int	pcap_offline_read(pcap_t *, int, pcap_handler, u_char *);
349 int	pcap_read(pcap_t *, int cnt, pcap_handler, u_char *);
350 
351 #ifndef HAVE_STRLCPY
352 #define strlcpy(x, y, z) \
353 	(strncpy((x), (y), (z)), \
354 	 ((z) <= 0 ? 0 : ((x)[(z) - 1] = '\0')), \
355 	 strlen((y)))
356 #endif
357 
358 #include <stdarg.h>
359 
360 #if !defined(HAVE_SNPRINTF)
361 #define snprintf pcap_snprintf
362 extern int snprintf (char *, size_t, const char *, ...);
363 #endif
364 
365 #if !defined(HAVE_VSNPRINTF)
366 #define vsnprintf pcap_vsnprintf
367 extern int vsnprintf (char *, size_t, const char *, va_list ap);
368 #endif
369 
370 /*
371  * Does the packet count argument to a module's read routine say
372  * "supply packets until you run out of packets"?
373  */
374 #define PACKET_COUNT_IS_UNLIMITED(count)	((count) <= 0)
375 
376 /*
377  * Routines that most pcap implementations can use for non-blocking mode.
378  */
379 #if !defined(WIN32) && !defined(MSDOS)
380 int	pcap_getnonblock_fd(pcap_t *, char *);
381 int	pcap_setnonblock_fd(pcap_t *p, int, char *);
382 #endif
383 
384 /*
385  * Internal interfaces for "pcap_create()".
386  *
387  * "pcap_create_interface()" is the routine to do a pcap_create on
388  * a regular network interface.  There are multiple implementations
389  * of this, one for each platform type (Linux, BPF, DLPI, etc.),
390  * with the one used chosen by the configure script.
391  *
392  * "pcap_create_common()" allocates and fills in a pcap_t, for use
393  * by pcap_create routines.
394  */
395 pcap_t	*pcap_create_interface(const char *, char *);
396 pcap_t	*pcap_create_common(const char *, char *, size_t);
397 int	pcap_do_addexit(pcap_t *);
398 void	pcap_add_to_pcaps_to_close(pcap_t *);
399 void	pcap_remove_from_pcaps_to_close(pcap_t *);
400 void	pcap_cleanup_live_common(pcap_t *);
401 int	pcap_not_initialized(pcap_t *);
402 int	pcap_check_activated(pcap_t *);
403 
404 /*
405  * Internal interfaces for "pcap_findalldevs()".
406  *
407  * "pcap_findalldevs_interfaces()" finds interfaces using the
408  * "standard" mechanisms (SIOCGIFCONF, "getifaddrs()", etc.).
409  *
410  * "pcap_platform_finddevs()" is a platform-dependent routine to
411  * add devices not found by the "standard" mechanisms.
412  *
413  * "pcap_add_if()" adds an interface to the list of interfaces, for
414  * use by various "find interfaces" routines.
415  */
416 int	pcap_findalldevs_interfaces(pcap_if_t **, char *);
417 int	pcap_platform_finddevs(pcap_if_t **, char *);
418 int	add_addr_to_iflist(pcap_if_t **, const char *, u_int, struct sockaddr *,
419 	    size_t, struct sockaddr *, size_t, struct sockaddr *, size_t,
420 	    struct sockaddr *, size_t, char *);
421 int	add_addr_to_dev(pcap_if_t *, struct sockaddr *, size_t,
422 	    struct sockaddr *, size_t, struct sockaddr *, size_t,
423 	    struct sockaddr *dstaddr, size_t, char *errbuf);
424 int	pcap_add_if(pcap_if_t **, const char *, u_int, const char *, char *);
425 struct sockaddr *dup_sockaddr(struct sockaddr *, size_t);
426 int	add_or_find_if(pcap_if_t **, pcap_if_t **, const char *, u_int,
427 	    const char *, char *);
428 
429 /*
430  * Internal interfaces for "pcap_open_offline()".
431  *
432  * "pcap_open_offline_common()" allocates and fills in a pcap_t, for use
433  * by pcap_open_offline routines.
434  *
435  * "sf_cleanup()" closes the file handle associated with a pcap_t, if
436  * appropriate, and frees all data common to all modules for handling
437  * savefile types.
438  */
439 pcap_t	*pcap_open_offline_common(char *ebuf, size_t size);
440 void	sf_cleanup(pcap_t *p);
441 
442 /*
443  * Internal interfaces for both "pcap_create()" and routines that
444  * open savefiles.
445  *
446  * "pcap_oneshot()" is the standard one-shot callback for "pcap_next()"
447  * and "pcap_next_ex()".
448  */
449 void	pcap_oneshot(u_char *, const struct pcap_pkthdr *, const u_char *);
450 
451 #ifdef WIN32
452 char	*pcap_win32strerror(void);
453 #endif
454 
455 int	install_bpf_program(pcap_t *, struct bpf_program *);
456 
457 int	pcap_strcasecmp(const char *, const char *);
458 
459 #ifdef __cplusplus
460 }
461 #endif
462 
463 #endif
464