1 /* ppc.h -- Header file for PowerPC opcode table 2 Copyright (C) 1994-2014 Free Software Foundation, Inc. 3 Written by Ian Lance Taylor, Cygnus Support 4 5 This file is part of GDB, GAS, and the GNU binutils. 6 7 GDB, GAS, and the GNU binutils are free software; you can redistribute 8 them and/or modify them under the terms of the GNU General Public 9 License as published by the Free Software Foundation; either version 3, 10 or (at your option) any later version. 11 12 GDB, GAS, and the GNU binutils are distributed in the hope that they 13 will be useful, but WITHOUT ANY WARRANTY; without even the implied 14 warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See 15 the GNU General Public License for more details. 16 17 You should have received a copy of the GNU General Public License 18 along with this file; see the file COPYING3. If not, write to the Free 19 Software Foundation, 51 Franklin Street - Fifth Floor, Boston, 20 MA 02110-1301, USA. */ 21 22 #ifndef PPC_H 23 #define PPC_H 24 25 #include "bfd_stdint.h" 26 27 typedef uint64_t ppc_cpu_t; 28 29 /* The opcode table is an array of struct powerpc_opcode. */ 30 31 struct powerpc_opcode 32 { 33 /* The opcode name. */ 34 const char *name; 35 36 /* The opcode itself. Those bits which will be filled in with 37 operands are zeroes. */ 38 unsigned long opcode; 39 40 /* The opcode mask. This is used by the disassembler. This is a 41 mask containing ones indicating those bits which must match the 42 opcode field, and zeroes indicating those bits which need not 43 match (and are presumably filled in by operands). */ 44 unsigned long mask; 45 46 /* One bit flags for the opcode. These are used to indicate which 47 specific processors support the instructions. The defined values 48 are listed below. */ 49 ppc_cpu_t flags; 50 51 /* One bit flags for the opcode. These are used to indicate which 52 specific processors no longer support the instructions. The defined 53 values are listed below. */ 54 ppc_cpu_t deprecated; 55 56 /* An array of operand codes. Each code is an index into the 57 operand table. They appear in the order which the operands must 58 appear in assembly code, and are terminated by a zero. */ 59 unsigned char operands[8]; 60 }; 61 62 /* The table itself is sorted by major opcode number, and is otherwise 63 in the order in which the disassembler should consider 64 instructions. */ 65 extern const struct powerpc_opcode powerpc_opcodes[]; 66 extern const int powerpc_num_opcodes; 67 extern const struct powerpc_opcode vle_opcodes[]; 68 extern const int vle_num_opcodes; 69 70 /* Values defined for the flags field of a struct powerpc_opcode. */ 71 72 /* Opcode is defined for the PowerPC architecture. */ 73 #define PPC_OPCODE_PPC 1 74 75 /* Opcode is defined for the POWER (RS/6000) architecture. */ 76 #define PPC_OPCODE_POWER 2 77 78 /* Opcode is defined for the POWER2 (Rios 2) architecture. */ 79 #define PPC_OPCODE_POWER2 4 80 81 /* Opcode is supported by the Motorola PowerPC 601 processor. The 601 82 is assumed to support all PowerPC (PPC_OPCODE_PPC) instructions, 83 but it also supports many additional POWER instructions. */ 84 #define PPC_OPCODE_601 8 85 86 /* Opcode is supported in both the Power and PowerPC architectures 87 (ie, compiler's -mcpu=common or assembler's -mcom). More than just 88 the intersection of PPC_OPCODE_PPC with the union of PPC_OPCODE_POWER 89 and PPC_OPCODE_POWER2 because many instructions changed mnemonics 90 between POWER and POWERPC. */ 91 #define PPC_OPCODE_COMMON 0x10 92 93 /* Opcode is supported for any Power or PowerPC platform (this is 94 for the assembler's -many option, and it eliminates duplicates). */ 95 #define PPC_OPCODE_ANY 0x20 96 97 /* Opcode is only defined on 64 bit architectures. */ 98 #define PPC_OPCODE_64 0x40 99 100 /* Opcode is supported as part of the 64-bit bridge. */ 101 #define PPC_OPCODE_64_BRIDGE 0x80 102 103 /* Opcode is supported by Altivec Vector Unit */ 104 #define PPC_OPCODE_ALTIVEC 0x100 105 106 /* Opcode is supported by PowerPC 403 processor. */ 107 #define PPC_OPCODE_403 0x200 108 109 /* Opcode is supported by PowerPC BookE processor. */ 110 #define PPC_OPCODE_BOOKE 0x400 111 112 /* Opcode is supported by PowerPC 440 processor. */ 113 #define PPC_OPCODE_440 0x800 114 115 /* Opcode is only supported by Power4 architecture. */ 116 #define PPC_OPCODE_POWER4 0x1000 117 118 /* Opcode is only supported by Power7 architecture. */ 119 #define PPC_OPCODE_POWER7 0x2000 120 121 /* Opcode is only supported by e500x2 Core. */ 122 #define PPC_OPCODE_SPE 0x4000 123 124 /* Opcode is supported by e500x2 Integer select APU. */ 125 #define PPC_OPCODE_ISEL 0x8000 126 127 /* Opcode is an e500 SPE floating point instruction. */ 128 #define PPC_OPCODE_EFS 0x10000 129 130 /* Opcode is supported by branch locking APU. */ 131 #define PPC_OPCODE_BRLOCK 0x20000 132 133 /* Opcode is supported by performance monitor APU. */ 134 #define PPC_OPCODE_PMR 0x40000 135 136 /* Opcode is supported by cache locking APU. */ 137 #define PPC_OPCODE_CACHELCK 0x80000 138 139 /* Opcode is supported by machine check APU. */ 140 #define PPC_OPCODE_RFMCI 0x100000 141 142 /* Opcode is only supported by Power5 architecture. */ 143 #define PPC_OPCODE_POWER5 0x200000 144 145 /* Opcode is supported by PowerPC e300 family. */ 146 #define PPC_OPCODE_E300 0x400000 147 148 /* Opcode is only supported by Power6 architecture. */ 149 #define PPC_OPCODE_POWER6 0x800000 150 151 /* Opcode is only supported by PowerPC Cell family. */ 152 #define PPC_OPCODE_CELL 0x1000000 153 154 /* Opcode is supported by CPUs with paired singles support. */ 155 #define PPC_OPCODE_PPCPS 0x2000000 156 157 /* Opcode is supported by Power E500MC */ 158 #define PPC_OPCODE_E500MC 0x4000000 159 160 /* Opcode is supported by PowerPC 405 processor. */ 161 #define PPC_OPCODE_405 0x8000000 162 163 /* Opcode is supported by Vector-Scalar (VSX) Unit */ 164 #define PPC_OPCODE_VSX 0x10000000 165 166 /* Opcode is supported by A2. */ 167 #define PPC_OPCODE_A2 0x20000000 168 169 /* Opcode is supported by PowerPC 476 processor. */ 170 #define PPC_OPCODE_476 0x40000000 171 172 /* Opcode is supported by AppliedMicro Titan core */ 173 #define PPC_OPCODE_TITAN 0x80000000 174 175 /* Opcode which is supported by the e500 family */ 176 #define PPC_OPCODE_E500 0x100000000ull 177 178 /* Opcode is supported by Extended Altivec Vector Unit */ 179 #define PPC_OPCODE_ALTIVEC2 0x200000000ull 180 181 /* Opcode is supported by Power E6500 */ 182 #define PPC_OPCODE_E6500 0x400000000ull 183 184 /* Opcode is supported by Thread management APU */ 185 #define PPC_OPCODE_TMR 0x800000000ull 186 187 /* Opcode which is supported by the VLE extension. */ 188 #define PPC_OPCODE_VLE 0x1000000000ull 189 190 /* Opcode is only supported by Power8 architecture. */ 191 #define PPC_OPCODE_POWER8 0x2000000000ull 192 193 /* Opcode which is supported by the Hardware Transactional Memory extension. */ 194 /* Currently, this is the same as the POWER8 mask. If another cpu comes out 195 that isn't a superset of POWER8, we can define this to its own mask. */ 196 #define PPC_OPCODE_HTM PPC_OPCODE_POWER8 197 198 /* A macro to extract the major opcode from an instruction. */ 199 #define PPC_OP(i) (((i) >> 26) & 0x3f) 200 201 /* A macro to determine if the instruction is a 2-byte VLE insn. */ 202 #define PPC_OP_SE_VLE(m) ((m) <= 0xffff) 203 204 /* A macro to extract the major opcode from a VLE instruction. */ 205 #define VLE_OP(i,m) (((i) >> ((m) <= 0xffff ? 10 : 26)) & 0x3f) 206 207 /* A macro to convert a VLE opcode to a VLE opcode segment. */ 208 #define VLE_OP_TO_SEG(i) ((i) >> 1) 209 210 /* The operands table is an array of struct powerpc_operand. */ 211 212 struct powerpc_operand 213 { 214 /* A bitmask of bits in the operand. */ 215 unsigned int bitm; 216 217 /* The shift operation to be applied to the operand. No shift 218 is made if this is zero. For positive values, the operand 219 is shifted left by SHIFT. For negative values, the operand 220 is shifted right by -SHIFT. Use PPC_OPSHIFT_INV to indicate 221 that BITM and SHIFT cannot be used to determine where the 222 operand goes in the insn. */ 223 int shift; 224 225 /* Insertion function. This is used by the assembler. To insert an 226 operand value into an instruction, check this field. 227 228 If it is NULL, execute 229 if (o->shift >= 0) 230 i |= (op & o->bitm) << o->shift; 231 else 232 i |= (op & o->bitm) >> -o->shift; 233 (i is the instruction which we are filling in, o is a pointer to 234 this structure, and op is the operand value). 235 236 If this field is not NULL, then simply call it with the 237 instruction and the operand value. It will return the new value 238 of the instruction. If the ERRMSG argument is not NULL, then if 239 the operand value is illegal, *ERRMSG will be set to a warning 240 string (the operand will be inserted in any case). If the 241 operand value is legal, *ERRMSG will be unchanged (most operands 242 can accept any value). */ 243 unsigned long (*insert) 244 (unsigned long instruction, long op, ppc_cpu_t dialect, const char **errmsg); 245 246 /* Extraction function. This is used by the disassembler. To 247 extract this operand type from an instruction, check this field. 248 249 If it is NULL, compute 250 if (o->shift >= 0) 251 op = (i >> o->shift) & o->bitm; 252 else 253 op = (i << -o->shift) & o->bitm; 254 if ((o->flags & PPC_OPERAND_SIGNED) != 0) 255 sign_extend (op); 256 (i is the instruction, o is a pointer to this structure, and op 257 is the result). 258 259 If this field is not NULL, then simply call it with the 260 instruction value. It will return the value of the operand. If 261 the INVALID argument is not NULL, *INVALID will be set to 262 non-zero if this operand type can not actually be extracted from 263 this operand (i.e., the instruction does not match). If the 264 operand is valid, *INVALID will not be changed. */ 265 long (*extract) (unsigned long instruction, ppc_cpu_t dialect, int *invalid); 266 267 /* One bit syntax flags. */ 268 unsigned long flags; 269 }; 270 271 /* Elements in the table are retrieved by indexing with values from 272 the operands field of the powerpc_opcodes table. */ 273 274 extern const struct powerpc_operand powerpc_operands[]; 275 extern const unsigned int num_powerpc_operands; 276 277 /* Use with the shift field of a struct powerpc_operand to indicate 278 that BITM and SHIFT cannot be used to determine where the operand 279 goes in the insn. */ 280 #define PPC_OPSHIFT_INV (-1 << 31) 281 282 /* Values defined for the flags field of a struct powerpc_operand. */ 283 284 /* This operand takes signed values. */ 285 #define PPC_OPERAND_SIGNED (0x1) 286 287 /* This operand takes signed values, but also accepts a full positive 288 range of values when running in 32 bit mode. That is, if bits is 289 16, it takes any value from -0x8000 to 0xffff. In 64 bit mode, 290 this flag is ignored. */ 291 #define PPC_OPERAND_SIGNOPT (0x2) 292 293 /* This operand does not actually exist in the assembler input. This 294 is used to support extended mnemonics such as mr, for which two 295 operands fields are identical. The assembler should call the 296 insert function with any op value. The disassembler should call 297 the extract function, ignore the return value, and check the value 298 placed in the valid argument. */ 299 #define PPC_OPERAND_FAKE (0x4) 300 301 /* The next operand should be wrapped in parentheses rather than 302 separated from this one by a comma. This is used for the load and 303 store instructions which want their operands to look like 304 reg,displacement(reg) 305 */ 306 #define PPC_OPERAND_PARENS (0x8) 307 308 /* This operand may use the symbolic names for the CR fields, which 309 are 310 lt 0 gt 1 eq 2 so 3 un 3 311 cr0 0 cr1 1 cr2 2 cr3 3 312 cr4 4 cr5 5 cr6 6 cr7 7 313 These may be combined arithmetically, as in cr2*4+gt. These are 314 only supported on the PowerPC, not the POWER. */ 315 #define PPC_OPERAND_CR_BIT (0x10) 316 317 /* This operand names a register. The disassembler uses this to print 318 register names with a leading 'r'. */ 319 #define PPC_OPERAND_GPR (0x20) 320 321 /* Like PPC_OPERAND_GPR, but don't print a leading 'r' for r0. */ 322 #define PPC_OPERAND_GPR_0 (0x40) 323 324 /* This operand names a floating point register. The disassembler 325 prints these with a leading 'f'. */ 326 #define PPC_OPERAND_FPR (0x80) 327 328 /* This operand is a relative branch displacement. The disassembler 329 prints these symbolically if possible. */ 330 #define PPC_OPERAND_RELATIVE (0x100) 331 332 /* This operand is an absolute branch address. The disassembler 333 prints these symbolically if possible. */ 334 #define PPC_OPERAND_ABSOLUTE (0x200) 335 336 /* This operand is optional, and is zero if omitted. This is used for 337 example, in the optional BF field in the comparison instructions. The 338 assembler must count the number of operands remaining on the line, 339 and the number of operands remaining for the opcode, and decide 340 whether this operand is present or not. The disassembler should 341 print this operand out only if it is not zero. */ 342 #define PPC_OPERAND_OPTIONAL (0x400) 343 344 /* This flag is only used with PPC_OPERAND_OPTIONAL. If this operand 345 is omitted, then for the next operand use this operand value plus 346 1, ignoring the next operand field for the opcode. This wretched 347 hack is needed because the Power rotate instructions can take 348 either 4 or 5 operands. The disassembler should print this operand 349 out regardless of the PPC_OPERAND_OPTIONAL field. */ 350 #define PPC_OPERAND_NEXT (0x800) 351 352 /* This operand should be regarded as a negative number for the 353 purposes of overflow checking (i.e., the normal most negative 354 number is disallowed and one more than the normal most positive 355 number is allowed). This flag will only be set for a signed 356 operand. */ 357 #define PPC_OPERAND_NEGATIVE (0x1000) 358 359 /* This operand names a vector unit register. The disassembler 360 prints these with a leading 'v'. */ 361 #define PPC_OPERAND_VR (0x2000) 362 363 /* This operand is for the DS field in a DS form instruction. */ 364 #define PPC_OPERAND_DS (0x4000) 365 366 /* This operand is for the DQ field in a DQ form instruction. */ 367 #define PPC_OPERAND_DQ (0x8000) 368 369 /* Valid range of operand is 0..n rather than 0..n-1. */ 370 #define PPC_OPERAND_PLUS1 (0x10000) 371 372 /* Xilinx APU and FSL related operands */ 373 #define PPC_OPERAND_FSL (0x20000) 374 #define PPC_OPERAND_FCR (0x40000) 375 #define PPC_OPERAND_UDI (0x80000) 376 377 /* This operand names a vector-scalar unit register. The disassembler 378 prints these with a leading 'vs'. */ 379 #define PPC_OPERAND_VSR (0x100000) 380 381 /* This is a CR FIELD that does not use symbolic names. */ 382 #define PPC_OPERAND_CR_REG (0x200000) 383 384 /* The POWER and PowerPC assemblers use a few macros. We keep them 385 with the operands table for simplicity. The macro table is an 386 array of struct powerpc_macro. */ 387 388 struct powerpc_macro 389 { 390 /* The macro name. */ 391 const char *name; 392 393 /* The number of operands the macro takes. */ 394 unsigned int operands; 395 396 /* One bit flags for the opcode. These are used to indicate which 397 specific processors support the instructions. The values are the 398 same as those for the struct powerpc_opcode flags field. */ 399 ppc_cpu_t flags; 400 401 /* A format string to turn the macro into a normal instruction. 402 Each %N in the string is replaced with operand number N (zero 403 based). */ 404 const char *format; 405 }; 406 407 extern const struct powerpc_macro powerpc_macros[]; 408 extern const int powerpc_num_macros; 409 410 extern ppc_cpu_t ppc_parse_cpu (ppc_cpu_t, ppc_cpu_t *, const char *); 411 412 #endif /* PPC_H */ 413