1 /* 2 * Stack-less Just-In-Time compiler 3 * 4 * Copyright 2009-2012 Zoltan Herczeg (hzmester@freemail.hu). All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without modification, are 7 * permitted provided that the following conditions are met: 8 * 9 * 1. Redistributions of source code must retain the above copyright notice, this list of 10 * conditions and the following disclaimer. 11 * 12 * 2. Redistributions in binary form must reproduce the above copyright notice, this list 13 * of conditions and the following disclaimer in the documentation and/or other materials 14 * provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS ``AS IS'' AND ANY 17 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 19 * SHALL THE COPYRIGHT HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED 21 * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR 22 * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 23 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN 24 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 */ 26 27 #ifndef _SLJIT_CONFIG_INTERNAL_H_ 28 #define _SLJIT_CONFIG_INTERNAL_H_ 29 30 /* 31 SLJIT defines the following architecture dependent types and macros: 32 33 Types: 34 sljit_sb, sljit_ub : signed and unsigned 8 bit byte 35 sljit_sh, sljit_uh : signed and unsigned 16 bit half-word (short) type 36 sljit_si, sljit_ui : signed and unsigned 32 bit integer type 37 sljit_sw, sljit_uw : signed and unsigned machine word, enough to store a pointer 38 sljit_p : unsgined pointer value (usually the same as sljit_uw, but 39 some 64 bit ABIs may use 32 bit pointers) 40 sljit_s : single precision floating point value 41 sljit_d : double precision floating point value 42 43 Macros for feature detection (boolean): 44 SLJIT_32BIT_ARCHITECTURE : 32 bit architecture 45 SLJIT_64BIT_ARCHITECTURE : 64 bit architecture 46 SLJIT_LITTLE_ENDIAN : little endian architecture 47 SLJIT_BIG_ENDIAN : big endian architecture 48 SLJIT_UNALIGNED : allows unaligned memory accesses for non-fpu operations (only!) 49 SLJIT_INDIRECT_CALL : see SLJIT_FUNC_OFFSET() for more information 50 51 Constants: 52 SLJIT_NUMBER_OF_REGISTERS : number of available registers 53 SLJIT_NUMBER_OF_SCRATCH_REGISTERS : number of available scratch registers 54 SLJIT_NUMBER_OF_SAVED_REGISTERS : number of available saved registers 55 SLJIT_NUMBER_OF_FLOAT_REGISTERS : number of available floating point registers 56 SLJIT_NUMBER_OF_SCRATCH_FLOAT_REGISTERS : number of available floating point scratch registers 57 SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS : number of available floating point saved registers 58 SLJIT_WORD_SHIFT : the shift required to apply when accessing a sljit_sw/sljit_uw array by index 59 SLJIT_DOUBLE_SHIFT : the shift required to apply when accessing 60 a double precision floating point array by index 61 SLJIT_SINGLE_SHIFT : the shift required to apply when accessing 62 a single precision floating point array by index 63 SLJIT_LOCALS_OFFSET : local space starting offset (SLJIT_SP + SLJIT_LOCALS_OFFSET) 64 SLJIT_RETURN_ADDRESS_OFFSET : a return instruction always adds this offset to the return address 65 66 Other macros: 67 SLJIT_CALL : C calling convention define for both calling JIT form C and C callbacks for JIT 68 SLJIT_W(number) : defining 64 bit constants on 64 bit architectures (compiler independent helper) 69 */ 70 71 /*****************/ 72 /* Sanity check. */ 73 /*****************/ 74 75 #if !((defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \ 76 || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ 77 || (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \ 78 || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ 79 || (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \ 80 || (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ 81 || (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ 82 || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \ 83 || (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \ 84 || (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \ 85 || (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) \ 86 || (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) \ 87 || (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) \ 88 || (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)) 89 #error "An architecture must be selected" 90 #endif 91 92 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \ 93 + (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ 94 + (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \ 95 + (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ 96 + (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \ 97 + (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ 98 + (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ 99 + (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \ 100 + (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) \ 101 + (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \ 102 + (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \ 103 + (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) \ 104 + (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) \ 105 + (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) >= 2 106 #error "Multiple architectures are selected" 107 #endif 108 109 /********************************************************/ 110 /* Automatic CPU detection (requires compiler support). */ 111 /********************************************************/ 112 113 #if (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) 114 115 #ifndef _WIN32 116 117 #if defined(__i386__) || defined(__i386) 118 #define SLJIT_CONFIG_X86_32 1 119 #elif defined(__x86_64__) 120 #define SLJIT_CONFIG_X86_64 1 121 #elif defined(__arm__) || defined(__ARM__) 122 #ifdef __thumb2__ 123 #define SLJIT_CONFIG_ARM_THUMB2 1 124 #elif defined(__ARM_ARCH_7__) || defined(__ARM_ARCH_7A__) || defined(__ARM_ARCH_7R__) 125 #define SLJIT_CONFIG_ARM_V7 1 126 #else 127 #define SLJIT_CONFIG_ARM_V5 1 128 #endif 129 #elif defined (__aarch64__) 130 #define SLJIT_CONFIG_ARM_64 1 131 #elif defined(__ppc64__) || defined(__powerpc64__) || defined(_ARCH_PPC64) || (defined(_POWER) && defined(__64BIT__)) 132 #define SLJIT_CONFIG_PPC_64 1 133 #elif defined(__ppc__) || defined(__powerpc__) || defined(_ARCH_PPC) || defined(_ARCH_PWR) || defined(_ARCH_PWR2) || defined(_POWER) 134 #define SLJIT_CONFIG_PPC_32 1 135 #elif defined(__mips__) && !defined(_LP64) 136 #define SLJIT_CONFIG_MIPS_32 1 137 #elif defined(__mips64) 138 #define SLJIT_CONFIG_MIPS_64 1 139 #elif defined(__sparc__) || defined(__sparc) 140 #define SLJIT_CONFIG_SPARC_32 1 141 #elif defined(__tilegx__) 142 #define SLJIT_CONFIG_TILEGX 1 143 #else 144 /* Unsupported architecture */ 145 #define SLJIT_CONFIG_UNSUPPORTED 1 146 #endif 147 148 #else /* !_WIN32 */ 149 150 #if defined(_M_X64) || defined(__x86_64__) 151 #define SLJIT_CONFIG_X86_64 1 152 #elif defined(_ARM_) 153 #define SLJIT_CONFIG_ARM_V5 1 154 #else 155 #define SLJIT_CONFIG_X86_32 1 156 #endif 157 158 #endif /* !WIN32 */ 159 #endif /* SLJIT_CONFIG_AUTO */ 160 161 #if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) 162 #undef SLJIT_EXECUTABLE_ALLOCATOR 163 #endif 164 165 /******************************/ 166 /* CPU family type detection. */ 167 /******************************/ 168 169 #if (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ 170 || (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) 171 #define SLJIT_CONFIG_ARM_32 1 172 #endif 173 174 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) 175 #define SLJIT_CONFIG_X86 1 176 #elif (defined SLJIT_CONFIG_ARM_32 && SLJIT_CONFIG_ARM_32) || (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) 177 #define SLJIT_CONFIG_ARM 1 178 #elif (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) 179 #define SLJIT_CONFIG_PPC 1 180 #elif (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) || (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) 181 #define SLJIT_CONFIG_MIPS 1 182 #elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) || (defined SLJIT_CONFIG_SPARC_64 && SLJIT_CONFIG_SPARC_64) 183 #define SLJIT_CONFIG_SPARC 1 184 #endif 185 186 /**********************************/ 187 /* External function definitions. */ 188 /**********************************/ 189 190 #if !(defined SLJIT_STD_MACROS_DEFINED && SLJIT_STD_MACROS_DEFINED) 191 192 /* These libraries are needed for the macros below. */ 193 #include <stdlib.h> 194 #include <string.h> 195 196 #endif /* SLJIT_STD_MACROS_DEFINED */ 197 198 /* General macros: 199 Note: SLJIT is designed to be independent from them as possible. 200 201 In release mode (SLJIT_DEBUG is not defined) only the following 202 external functions are needed: 203 */ 204 205 #ifndef SLJIT_MALLOC 206 #define SLJIT_MALLOC(size, allocator_data) malloc(size) 207 #endif 208 209 #ifndef SLJIT_FREE 210 #define SLJIT_FREE(ptr, allocator_data) free(ptr) 211 #endif 212 213 #ifndef SLJIT_MEMMOVE 214 #define SLJIT_MEMMOVE(dest, src, len) memmove(dest, src, len) 215 #endif 216 217 #ifndef SLJIT_ZEROMEM 218 #define SLJIT_ZEROMEM(dest, len) memset(dest, 0, len) 219 #endif 220 221 /***************************/ 222 /* Compiler helper macros. */ 223 /***************************/ 224 225 #if !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY) 226 227 #if defined(__GNUC__) && (__GNUC__ >= 3) 228 #define SLJIT_LIKELY(x) __builtin_expect((x), 1) 229 #define SLJIT_UNLIKELY(x) __builtin_expect((x), 0) 230 #else 231 #define SLJIT_LIKELY(x) (x) 232 #define SLJIT_UNLIKELY(x) (x) 233 #endif 234 235 #endif /* !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY) */ 236 237 #ifndef SLJIT_INLINE 238 /* Inline functions. Some old compilers do not support them. */ 239 #if defined(__SUNPRO_C) && __SUNPRO_C <= 0x510 240 #define SLJIT_INLINE 241 #else 242 #define SLJIT_INLINE __inline 243 #endif 244 #endif /* !SLJIT_INLINE */ 245 246 #ifndef SLJIT_NOINLINE 247 /* Not inline functions. */ 248 #if defined(__GNUC__) 249 #define SLJIT_NOINLINE __attribute__ ((noinline)) 250 #else 251 #define SLJIT_NOINLINE 252 #endif 253 #endif /* !SLJIT_INLINE */ 254 255 #ifndef SLJIT_CONST 256 /* Const variables. */ 257 #define SLJIT_CONST const 258 #endif 259 260 #ifndef SLJIT_UNUSED_ARG 261 /* Unused arguments. */ 262 #define SLJIT_UNUSED_ARG(arg) (void)arg 263 #endif 264 265 /*********************************/ 266 /* Type of public API functions. */ 267 /*********************************/ 268 269 #if (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC) 270 /* Static ABI functions. For all-in-one programs. */ 271 272 #if defined(__GNUC__) 273 /* Disable unused warnings in gcc. */ 274 #define SLJIT_API_FUNC_ATTRIBUTE static __attribute__((unused)) 275 #else 276 #define SLJIT_API_FUNC_ATTRIBUTE static 277 #endif 278 279 #else 280 #define SLJIT_API_FUNC_ATTRIBUTE 281 #endif /* (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC) */ 282 283 /****************************/ 284 /* Instruction cache flush. */ 285 /****************************/ 286 287 #ifndef SLJIT_CACHE_FLUSH 288 289 #if (defined SLJIT_CONFIG_X86 && SLJIT_CONFIG_X86) 290 291 /* Not required to implement on archs with unified caches. */ 292 #define SLJIT_CACHE_FLUSH(from, to) 293 294 #elif defined __APPLE__ 295 296 /* Supported by all macs since Mac OS 10.5. 297 However, it does not work on non-jailbroken iOS devices, 298 although the compilation is successful. */ 299 300 #define SLJIT_CACHE_FLUSH(from, to) \ 301 sys_icache_invalidate((char*)(from), (char*)(to) - (char*)(from)) 302 303 #elif defined __ANDROID__ 304 305 /* Android lacks __clear_cache; instead, cacheflush should be used. */ 306 307 #define SLJIT_CACHE_FLUSH(from, to) \ 308 cacheflush((long)(from), (long)(to), 0) 309 310 #elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC) 311 312 /* The __clear_cache() implementation of GCC is a dummy function on PowerPC. */ 313 #define SLJIT_CACHE_FLUSH(from, to) \ 314 ppc_cache_flush((from), (to)) 315 316 #elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) 317 318 /* The __clear_cache() implementation of GCC is a dummy function on Sparc. */ 319 #define SLJIT_CACHE_FLUSH(from, to) \ 320 sparc_cache_flush((from), (to)) 321 322 #else 323 324 /* Calls __ARM_NR_cacheflush on ARM-Linux. */ 325 #define SLJIT_CACHE_FLUSH(from, to) \ 326 __clear_cache((char*)(from), (char*)(to)) 327 328 #endif 329 330 #endif /* !SLJIT_CACHE_FLUSH */ 331 332 /******************************************************/ 333 /* Byte/half/int/word/single/double type definitions. */ 334 /******************************************************/ 335 336 /* 8 bit byte type. */ 337 typedef unsigned char sljit_ub; 338 typedef signed char sljit_sb; 339 340 /* 16 bit half-word type. */ 341 typedef unsigned short int sljit_uh; 342 typedef signed short int sljit_sh; 343 344 /* 32 bit integer type. */ 345 typedef unsigned int sljit_ui; 346 typedef signed int sljit_si; 347 348 /* Machine word type. Enough for storing a pointer. 349 32 bit for 32 bit machines. 350 64 bit for 64 bit machines. */ 351 #if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) 352 /* Just to have something. */ 353 #define SLJIT_WORD_SHIFT 0 354 typedef unsigned long int sljit_uw; 355 typedef long int sljit_sw; 356 #elif !(defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ 357 && !(defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ 358 && !(defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \ 359 && !(defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \ 360 && !(defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) 361 #define SLJIT_32BIT_ARCHITECTURE 1 362 #define SLJIT_WORD_SHIFT 2 363 typedef unsigned int sljit_uw; 364 typedef int sljit_sw; 365 #else 366 #define SLJIT_64BIT_ARCHITECTURE 1 367 #define SLJIT_WORD_SHIFT 3 368 #ifdef _WIN32 369 typedef unsigned __int64 sljit_uw; 370 typedef __int64 sljit_sw; 371 #else 372 typedef unsigned long int sljit_uw; 373 typedef long int sljit_sw; 374 #endif 375 #endif 376 377 typedef sljit_uw sljit_p; 378 379 /* Floating point types. */ 380 typedef float sljit_s; 381 typedef double sljit_d; 382 383 /* Shift for pointer sized data. */ 384 #define SLJIT_POINTER_SHIFT SLJIT_WORD_SHIFT 385 386 /* Shift for double precision sized data. */ 387 #define SLJIT_DOUBLE_SHIFT 3 388 #define SLJIT_SINGLE_SHIFT 2 389 390 #ifndef SLJIT_W 391 392 /* Defining long constants. */ 393 #if (defined SLJIT_64BIT_ARCHITECTURE && SLJIT_64BIT_ARCHITECTURE) 394 #define SLJIT_W(w) (w##ll) 395 #else 396 #define SLJIT_W(w) (w) 397 #endif 398 399 #endif /* !SLJIT_W */ 400 401 /*************************/ 402 /* Endianness detection. */ 403 /*************************/ 404 405 #if !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN) 406 407 /* These macros are mostly useful for the applications. */ 408 #if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ 409 || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) 410 411 #ifdef __LITTLE_ENDIAN__ 412 #define SLJIT_LITTLE_ENDIAN 1 413 #else 414 #define SLJIT_BIG_ENDIAN 1 415 #endif 416 417 #elif (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \ 418 || (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) 419 420 #ifdef __MIPSEL__ 421 #define SLJIT_LITTLE_ENDIAN 1 422 #else 423 #define SLJIT_BIG_ENDIAN 1 424 #endif 425 426 #elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) 427 428 #define SLJIT_BIG_ENDIAN 1 429 430 #else 431 #define SLJIT_LITTLE_ENDIAN 1 432 #endif 433 434 #endif /* !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN) */ 435 436 /* Sanity check. */ 437 #if (defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN) && (defined SLJIT_LITTLE_ENDIAN && SLJIT_LITTLE_ENDIAN) 438 #error "Exactly one endianness must be selected" 439 #endif 440 441 #if !(defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN) && !(defined SLJIT_LITTLE_ENDIAN && SLJIT_LITTLE_ENDIAN) 442 #error "Exactly one endianness must be selected" 443 #endif 444 445 #ifndef SLJIT_UNALIGNED 446 447 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \ 448 || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ 449 || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ 450 || (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \ 451 || (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ 452 || (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ 453 || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) 454 #define SLJIT_UNALIGNED 1 455 #endif 456 457 #endif /* !SLJIT_UNALIGNED */ 458 459 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) 460 /* Auto detect SSE2 support using CPUID. 461 On 64 bit x86 cpus, sse2 must be present. */ 462 #define SLJIT_DETECT_SSE2 1 463 #endif 464 465 /*****************************************************************************************/ 466 /* Calling convention of functions generated by SLJIT or called from the generated code. */ 467 /*****************************************************************************************/ 468 469 #ifndef SLJIT_CALL 470 471 #if (defined SLJIT_USE_CDECL_CALLING_CONVENTION && SLJIT_USE_CDECL_CALLING_CONVENTION) 472 473 /* Force cdecl. */ 474 #define SLJIT_CALL 475 476 #elif (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) 477 478 #if defined(__GNUC__) && !defined(__APPLE__) 479 480 #define SLJIT_CALL __attribute__ ((fastcall)) 481 #define SLJIT_X86_32_FASTCALL 1 482 483 #elif defined(_MSC_VER) 484 485 #define SLJIT_CALL __fastcall 486 #define SLJIT_X86_32_FASTCALL 1 487 488 #elif defined(__BORLANDC__) 489 490 #define SLJIT_CALL __msfastcall 491 #define SLJIT_X86_32_FASTCALL 1 492 493 #else /* Unknown compiler. */ 494 495 /* The cdecl attribute is the default. */ 496 #define SLJIT_CALL 497 498 #endif 499 500 #else /* Non x86-32 architectures. */ 501 502 #define SLJIT_CALL 503 504 #endif /* SLJIT_CONFIG_X86_32 */ 505 506 #endif /* !SLJIT_CALL */ 507 508 #ifndef SLJIT_INDIRECT_CALL 509 #if ((defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) && (defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN)) \ 510 || ((defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) && defined _AIX) 511 /* It seems certain ppc compilers use an indirect addressing for functions 512 which makes things complicated. */ 513 #define SLJIT_INDIRECT_CALL 1 514 #endif 515 #endif /* SLJIT_INDIRECT_CALL */ 516 517 /* The offset which needs to be substracted from the return address to 518 determine the next executed instruction after return. */ 519 #ifndef SLJIT_RETURN_ADDRESS_OFFSET 520 #if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) 521 #define SLJIT_RETURN_ADDRESS_OFFSET 8 522 #else 523 #define SLJIT_RETURN_ADDRESS_OFFSET 0 524 #endif 525 #endif /* SLJIT_RETURN_ADDRESS_OFFSET */ 526 527 /***************************************************/ 528 /* Functions of the built-in executable allocator. */ 529 /***************************************************/ 530 531 #if (defined SLJIT_EXECUTABLE_ALLOCATOR && SLJIT_EXECUTABLE_ALLOCATOR) 532 SLJIT_API_FUNC_ATTRIBUTE void* sljit_malloc_exec(sljit_uw size); 533 SLJIT_API_FUNC_ATTRIBUTE void sljit_free_exec(void* ptr); 534 SLJIT_API_FUNC_ATTRIBUTE void sljit_free_unused_memory_exec(void); 535 #define SLJIT_MALLOC_EXEC(size) sljit_malloc_exec(size) 536 #define SLJIT_FREE_EXEC(ptr) sljit_free_exec(ptr) 537 #endif 538 539 /**********************************************/ 540 /* Registers and locals offset determination. */ 541 /**********************************************/ 542 543 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) 544 545 #define SLJIT_NUMBER_OF_REGISTERS 10 546 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 7 547 #if (defined SLJIT_X86_32_FASTCALL && SLJIT_X86_32_FASTCALL) 548 #define SLJIT_LOCALS_OFFSET_BASE ((2 + 4) * sizeof(sljit_sw)) 549 #else 550 /* Maximum 3 arguments are passed on the stack, +1 for double alignment. */ 551 #define SLJIT_LOCALS_OFFSET_BASE ((3 + 1 + 4) * sizeof(sljit_sw)) 552 #endif /* SLJIT_X86_32_FASTCALL */ 553 554 #elif (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) 555 556 #ifndef _WIN64 557 #define SLJIT_NUMBER_OF_REGISTERS 12 558 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 6 559 #define SLJIT_LOCALS_OFFSET_BASE (sizeof(sljit_sw)) 560 #else 561 #define SLJIT_NUMBER_OF_REGISTERS 12 562 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 8 563 #define SLJIT_LOCALS_OFFSET_BASE ((4 + 2) * sizeof(sljit_sw)) 564 #endif /* _WIN64 */ 565 566 #elif (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) 567 568 #define SLJIT_NUMBER_OF_REGISTERS 11 569 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 8 570 #define SLJIT_LOCALS_OFFSET_BASE 0 571 572 #elif (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) 573 574 #define SLJIT_NUMBER_OF_REGISTERS 11 575 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 7 576 #define SLJIT_LOCALS_OFFSET_BASE 0 577 578 #elif (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) 579 580 #define SLJIT_NUMBER_OF_REGISTERS 25 581 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 10 582 #define SLJIT_LOCALS_OFFSET_BASE (2 * sizeof(sljit_sw)) 583 584 #elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC) 585 586 #define SLJIT_NUMBER_OF_REGISTERS 22 587 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 17 588 #if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) || (defined _AIX) 589 #define SLJIT_LOCALS_OFFSET_BASE ((6 + 8) * sizeof(sljit_sw)) 590 #elif (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) 591 /* Add +1 for double alignment. */ 592 #define SLJIT_LOCALS_OFFSET_BASE ((3 + 1) * sizeof(sljit_sw)) 593 #else 594 #define SLJIT_LOCALS_OFFSET_BASE (3 * sizeof(sljit_sw)) 595 #endif /* SLJIT_CONFIG_PPC_64 || _AIX */ 596 597 #elif (defined SLJIT_CONFIG_MIPS && SLJIT_CONFIG_MIPS) 598 599 #define SLJIT_NUMBER_OF_REGISTERS 17 600 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 8 601 #if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) 602 #define SLJIT_LOCALS_OFFSET_BASE (4 * sizeof(sljit_sw)) 603 #else 604 #define SLJIT_LOCALS_OFFSET_BASE 0 605 #endif 606 607 #elif (defined SLJIT_CONFIG_SPARC && SLJIT_CONFIG_SPARC) 608 609 #define SLJIT_NUMBER_OF_REGISTERS 18 610 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 14 611 #if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) 612 /* Add +1 for double alignment. */ 613 #define SLJIT_LOCALS_OFFSET_BASE ((23 + 1) * sizeof(sljit_sw)) 614 #endif 615 616 #elif (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) 617 618 #define SLJIT_NUMBER_OF_REGISTERS 10 619 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 5 620 #define SLJIT_LOCALS_OFFSET_BASE 0 621 622 #elif (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) 623 624 #define SLJIT_NUMBER_OF_REGISTERS 0 625 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 0 626 #define SLJIT_LOCALS_OFFSET_BASE 0 627 628 #endif 629 630 #define SLJIT_LOCALS_OFFSET (SLJIT_LOCALS_OFFSET_BASE) 631 632 #define SLJIT_NUMBER_OF_SCRATCH_REGISTERS \ 633 (SLJIT_NUMBER_OF_REGISTERS - SLJIT_NUMBER_OF_SAVED_REGISTERS) 634 635 #define SLJIT_NUMBER_OF_FLOAT_REGISTERS 6 636 #if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) && (defined _WIN64) 637 #define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 1 638 #else 639 #define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 0 640 #endif 641 642 #define SLJIT_NUMBER_OF_SCRATCH_FLOAT_REGISTERS \ 643 (SLJIT_NUMBER_OF_FLOAT_REGISTERS - SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS) 644 645 /*************************************/ 646 /* Debug and verbose related macros. */ 647 /*************************************/ 648 649 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) 650 #include <stdio.h> 651 #endif 652 653 #if (defined SLJIT_DEBUG && SLJIT_DEBUG) 654 655 #if !defined(SLJIT_ASSERT) || !defined(SLJIT_ASSERT_STOP) 656 657 /* SLJIT_HALT_PROCESS must halt the process. */ 658 #ifndef SLJIT_HALT_PROCESS 659 #include <stdlib.h> 660 661 #define SLJIT_HALT_PROCESS() \ 662 abort(); 663 #endif /* !SLJIT_HALT_PROCESS */ 664 665 #include <stdio.h> 666 667 #endif /* !SLJIT_ASSERT || !SLJIT_ASSERT_STOP */ 668 669 /* Feel free to redefine these two macros. */ 670 #ifndef SLJIT_ASSERT 671 672 #define SLJIT_ASSERT(x) \ 673 do { \ 674 if (SLJIT_UNLIKELY(!(x))) { \ 675 printf("Assertion failed at " __FILE__ ":%d\n", __LINE__); \ 676 SLJIT_HALT_PROCESS(); \ 677 } \ 678 } while (0) 679 680 #endif /* !SLJIT_ASSERT */ 681 682 #ifndef SLJIT_ASSERT_STOP 683 684 #define SLJIT_ASSERT_STOP() \ 685 do { \ 686 printf("Should never been reached " __FILE__ ":%d\n", __LINE__); \ 687 SLJIT_HALT_PROCESS(); \ 688 } while (0) 689 690 #endif /* !SLJIT_ASSERT_STOP */ 691 692 #else /* (defined SLJIT_DEBUG && SLJIT_DEBUG) */ 693 694 /* Forcing empty, but valid statements. */ 695 #undef SLJIT_ASSERT 696 #undef SLJIT_ASSERT_STOP 697 698 #define SLJIT_ASSERT(x) \ 699 do { } while (0) 700 #define SLJIT_ASSERT_STOP() \ 701 do { } while (0) 702 703 #endif /* (defined SLJIT_DEBUG && SLJIT_DEBUG) */ 704 705 #ifndef SLJIT_COMPILE_ASSERT 706 707 /* Should be improved eventually. */ 708 #define SLJIT_COMPILE_ASSERT(x, description) \ 709 SLJIT_ASSERT(x) 710 711 #endif /* !SLJIT_COMPILE_ASSERT */ 712 713 #endif 714