1 /* 2 * This file holds Hub protocol constants and data structures that are 3 * defined in chapter 11 (Hub Specification) of the USB 2.0 specification. 4 * 5 * It is used/shared between the USB core, the HCDs and couple of other USB 6 * drivers. 7 */ 8 9 #ifndef __LINUX_CH11_H 10 #define __LINUX_CH11_H 11 12 #include <linux/types.h> /* __u8 etc */ 13 14 /* This is arbitrary. 15 * From USB 2.0 spec Table 11-13, offset 7, a hub can 16 * have up to 255 ports. The most yet reported is 10. 17 * 18 * Current Wireless USB host hardware (Intel i1480 for example) allows 19 * up to 22 devices to connect. Upcoming hardware might raise that 20 * limit. Because the arrays need to add a bit for hub status data, we 21 * use 31, so plus one evens out to four bytes. 22 */ 23 #define USB_MAXCHILDREN 31 24 25 /* 26 * Hub request types 27 */ 28 29 #define USB_RT_HUB (USB_TYPE_CLASS | USB_RECIP_DEVICE) 30 #define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER) 31 32 /* 33 * Hub class requests 34 * See USB 2.0 spec Table 11-16 35 */ 36 #define HUB_CLEAR_TT_BUFFER 8 37 #define HUB_RESET_TT 9 38 #define HUB_GET_TT_STATE 10 39 #define HUB_STOP_TT 11 40 41 /* 42 * Hub class additional requests defined by USB 3.0 spec 43 * See USB 3.0 spec Table 10-6 44 */ 45 #define HUB_SET_DEPTH 12 46 #define HUB_GET_PORT_ERR_COUNT 13 47 48 /* 49 * Hub Class feature numbers 50 * See USB 2.0 spec Table 11-17 51 */ 52 #define C_HUB_LOCAL_POWER 0 53 #define C_HUB_OVER_CURRENT 1 54 55 /* 56 * Port feature numbers 57 * See USB 2.0 spec Table 11-17 58 */ 59 #define USB_PORT_FEAT_CONNECTION 0 60 #define USB_PORT_FEAT_ENABLE 1 61 #define USB_PORT_FEAT_SUSPEND 2 /* L2 suspend */ 62 #define USB_PORT_FEAT_OVER_CURRENT 3 63 #define USB_PORT_FEAT_RESET 4 64 #define USB_PORT_FEAT_L1 5 /* L1 suspend */ 65 #define USB_PORT_FEAT_POWER 8 66 #define USB_PORT_FEAT_LOWSPEED 9 /* Should never be used */ 67 #define USB_PORT_FEAT_C_CONNECTION 16 68 #define USB_PORT_FEAT_C_ENABLE 17 69 #define USB_PORT_FEAT_C_SUSPEND 18 70 #define USB_PORT_FEAT_C_OVER_CURRENT 19 71 #define USB_PORT_FEAT_C_RESET 20 72 #define USB_PORT_FEAT_TEST 21 73 #define USB_PORT_FEAT_INDICATOR 22 74 #define USB_PORT_FEAT_C_PORT_L1 23 75 76 /* 77 * Port feature selectors added by USB 3.0 spec. 78 * See USB 3.0 spec Table 10-7 79 */ 80 #define USB_PORT_FEAT_LINK_STATE 5 81 #define USB_PORT_FEAT_U1_TIMEOUT 23 82 #define USB_PORT_FEAT_U2_TIMEOUT 24 83 #define USB_PORT_FEAT_C_PORT_LINK_STATE 25 84 #define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26 85 #define USB_PORT_FEAT_REMOTE_WAKE_MASK 27 86 #define USB_PORT_FEAT_BH_PORT_RESET 28 87 #define USB_PORT_FEAT_C_BH_PORT_RESET 29 88 #define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30 89 90 #define USB_PORT_LPM_TIMEOUT(p) (((p) & 0xff) << 8) 91 92 /* USB 3.0 hub remote wake mask bits, see table 10-14 */ 93 #define USB_PORT_FEAT_REMOTE_WAKE_CONNECT (1 << 8) 94 #define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT (1 << 9) 95 #define USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT (1 << 10) 96 97 /* 98 * Hub Status and Hub Change results 99 * See USB 2.0 spec Table 11-19 and Table 11-20 100 */ 101 struct usb_port_status { 102 __le16 wPortStatus; 103 __le16 wPortChange; 104 } __attribute__ ((packed)); 105 106 /* 107 * wPortStatus bit field 108 * See USB 2.0 spec Table 11-21 109 */ 110 #define USB_PORT_STAT_CONNECTION 0x0001 111 #define USB_PORT_STAT_ENABLE 0x0002 112 #define USB_PORT_STAT_SUSPEND 0x0004 113 #define USB_PORT_STAT_OVERCURRENT 0x0008 114 #define USB_PORT_STAT_RESET 0x0010 115 #define USB_PORT_STAT_L1 0x0020 116 /* bits 6 to 7 are reserved */ 117 #define USB_PORT_STAT_POWER 0x0100 118 #define USB_PORT_STAT_LOW_SPEED 0x0200 119 #define USB_PORT_STAT_HIGH_SPEED 0x0400 120 #define USB_PORT_STAT_TEST 0x0800 121 #define USB_PORT_STAT_INDICATOR 0x1000 122 /* bits 13 to 15 are reserved */ 123 124 /* 125 * Additions to wPortStatus bit field from USB 3.0 126 * See USB 3.0 spec Table 10-10 127 */ 128 #define USB_PORT_STAT_LINK_STATE 0x01e0 129 #define USB_SS_PORT_STAT_POWER 0x0200 130 #define USB_SS_PORT_STAT_SPEED 0x1c00 131 #define USB_PORT_STAT_SPEED_5GBPS 0x0000 132 /* Valid only if port is enabled */ 133 /* Bits that are the same from USB 2.0 */ 134 #define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION | \ 135 USB_PORT_STAT_ENABLE | \ 136 USB_PORT_STAT_OVERCURRENT | \ 137 USB_PORT_STAT_RESET) 138 139 /* 140 * Definitions for PORT_LINK_STATE values 141 * (bits 5-8) in wPortStatus 142 */ 143 #define USB_SS_PORT_LS_U0 0x0000 144 #define USB_SS_PORT_LS_U1 0x0020 145 #define USB_SS_PORT_LS_U2 0x0040 146 #define USB_SS_PORT_LS_U3 0x0060 147 #define USB_SS_PORT_LS_SS_DISABLED 0x0080 148 #define USB_SS_PORT_LS_RX_DETECT 0x00a0 149 #define USB_SS_PORT_LS_SS_INACTIVE 0x00c0 150 #define USB_SS_PORT_LS_POLLING 0x00e0 151 #define USB_SS_PORT_LS_RECOVERY 0x0100 152 #define USB_SS_PORT_LS_HOT_RESET 0x0120 153 #define USB_SS_PORT_LS_COMP_MOD 0x0140 154 #define USB_SS_PORT_LS_LOOPBACK 0x0160 155 156 /* 157 * wPortChange bit field 158 * See USB 2.0 spec Table 11-22 and USB 2.0 LPM ECN Table-4.10 159 * Bits 0 to 5 shown, bits 6 to 15 are reserved 160 */ 161 #define USB_PORT_STAT_C_CONNECTION 0x0001 162 #define USB_PORT_STAT_C_ENABLE 0x0002 163 #define USB_PORT_STAT_C_SUSPEND 0x0004 164 #define USB_PORT_STAT_C_OVERCURRENT 0x0008 165 #define USB_PORT_STAT_C_RESET 0x0010 166 #define USB_PORT_STAT_C_L1 0x0020 167 /* 168 * USB 3.0 wPortChange bit fields 169 * See USB 3.0 spec Table 10-11 170 */ 171 #define USB_PORT_STAT_C_BH_RESET 0x0020 172 #define USB_PORT_STAT_C_LINK_STATE 0x0040 173 #define USB_PORT_STAT_C_CONFIG_ERROR 0x0080 174 175 /* 176 * wHubCharacteristics (masks) 177 * See USB 2.0 spec Table 11-13, offset 3 178 */ 179 #define HUB_CHAR_LPSM 0x0003 /* Logical Power Switching Mode mask */ 180 #define HUB_CHAR_COMMON_LPSM 0x0000 /* All ports power control at once */ 181 #define HUB_CHAR_INDV_PORT_LPSM 0x0001 /* per-port power control */ 182 #define HUB_CHAR_NO_LPSM 0x0002 /* no power switching */ 183 184 #define HUB_CHAR_COMPOUND 0x0004 /* hub is part of a compound device */ 185 186 #define HUB_CHAR_OCPM 0x0018 /* Over-Current Protection Mode mask */ 187 #define HUB_CHAR_COMMON_OCPM 0x0000 /* All ports Over-Current reporting */ 188 #define HUB_CHAR_INDV_PORT_OCPM 0x0008 /* per-port Over-current reporting */ 189 #define HUB_CHAR_NO_OCPM 0x0010 /* No Over-current Protection support */ 190 191 #define HUB_CHAR_TTTT 0x0060 /* TT Think Time mask */ 192 #define HUB_CHAR_PORTIND 0x0080 /* per-port indicators (LEDs) */ 193 194 struct usb_hub_status { 195 __le16 wHubStatus; 196 __le16 wHubChange; 197 } __attribute__ ((packed)); 198 199 /* 200 * Hub Status & Hub Change bit masks 201 * See USB 2.0 spec Table 11-19 and Table 11-20 202 * Bits 0 and 1 for wHubStatus and wHubChange 203 * Bits 2 to 15 are reserved for both 204 */ 205 #define HUB_STATUS_LOCAL_POWER 0x0001 206 #define HUB_STATUS_OVERCURRENT 0x0002 207 #define HUB_CHANGE_LOCAL_POWER 0x0001 208 #define HUB_CHANGE_OVERCURRENT 0x0002 209 210 211 /* 212 * Hub descriptor 213 * See USB 2.0 spec Table 11-13 214 */ 215 216 #define USB_DT_HUB (USB_TYPE_CLASS | 0x09) 217 #define USB_DT_SS_HUB (USB_TYPE_CLASS | 0x0a) 218 #define USB_DT_HUB_NONVAR_SIZE 7 219 #define USB_DT_SS_HUB_SIZE 12 220 221 /* 222 * Hub Device descriptor 223 * USB Hub class device protocols 224 */ 225 226 #define USB_HUB_PR_FS 0 /* Full speed hub */ 227 #define USB_HUB_PR_HS_NO_TT 0 /* Hi-speed hub without TT */ 228 #define USB_HUB_PR_HS_SINGLE_TT 1 /* Hi-speed hub with single TT */ 229 #define USB_HUB_PR_HS_MULTI_TT 2 /* Hi-speed hub with multiple TT */ 230 #define USB_HUB_PR_SS 3 /* Super speed hub */ 231 232 struct usb_hub_descriptor { 233 __u8 bDescLength; 234 __u8 bDescriptorType; 235 __u8 bNbrPorts; 236 __le16 wHubCharacteristics; 237 __u8 bPwrOn2PwrGood; 238 __u8 bHubContrCurrent; 239 240 /* 2.0 and 3.0 hubs differ here */ 241 union { 242 struct { 243 /* add 1 bit for hub status change; round to bytes */ 244 __u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8]; 245 __u8 PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8]; 246 } __attribute__ ((packed)) hs; 247 248 struct { 249 __u8 bHubHdrDecLat; 250 __le16 wHubDelay; 251 __le16 DeviceRemovable; 252 } __attribute__ ((packed)) ss; 253 } u; 254 } __attribute__ ((packed)); 255 256 /* port indicator status selectors, tables 11-7 and 11-25 */ 257 #define HUB_LED_AUTO 0 258 #define HUB_LED_AMBER 1 259 #define HUB_LED_GREEN 2 260 #define HUB_LED_OFF 3 261 262 enum hub_led_mode { 263 INDICATOR_AUTO = 0, 264 INDICATOR_CYCLE, 265 /* software blinks for attention: software, hardware, reserved */ 266 INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF, 267 INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF, 268 INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF 269 } __attribute__ ((packed)); 270 271 /* Transaction Translator Think Times, in bits */ 272 #define HUB_TTTT_8_BITS 0x00 273 #define HUB_TTTT_16_BITS 0x20 274 #define HUB_TTTT_24_BITS 0x40 275 #define HUB_TTTT_32_BITS 0x60 276 277 #endif /* __LINUX_CH11_H */ 278