1 /*
2 * Copyright (C) 2008 The Android Open Source Project
3 *
4 * Licensed under the Apache License, Version 2.0 (the "License");
5 * you may not use this file except in compliance with the License.
6 * You may obtain a copy of the License at
7 *
8 * http://www.apache.org/licenses/LICENSE-2.0
9 *
10 * Unless required by applicable law or agreed to in writing, software
11 * distributed under the License is distributed on an "AS IS" BASIS,
12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 * See the License for the specific language governing permissions and
14 * limitations under the License.
15 */
16
17
18 #ifndef ANDROID_GRALLOC_INTERFACE_H
19 #define ANDROID_GRALLOC_INTERFACE_H
20
21 #include <system/window.h>
22 #include <system/graphics.h>
23 #include <hardware/hardware.h>
24
25 #include <stdint.h>
26 #include <sys/cdefs.h>
27 #include <sys/types.h>
28
29 #include <cutils/native_handle.h>
30
31 #include <hardware/hardware.h>
32 #include <hardware/fb.h>
33
34 __BEGIN_DECLS
35
36 /**
37 * Module versioning information for the Gralloc hardware module, based on
38 * gralloc_module_t.common.module_api_version.
39 *
40 * Version History:
41 *
42 * GRALLOC_MODULE_API_VERSION_0_1:
43 * Initial Gralloc hardware module API.
44 *
45 * GRALLOC_MODULE_API_VERSION_0_2:
46 * Add support for flexible YCbCr format with (*lock_ycbcr)() method.
47 *
48 * GRALLOC_MODULE_API_VERSION_0_3:
49 * Add support for fence passing to/from lock/unlock.
50 */
51
52 #define GRALLOC_MODULE_API_VERSION_0_1 HARDWARE_MODULE_API_VERSION(0, 1)
53 #define GRALLOC_MODULE_API_VERSION_0_2 HARDWARE_MODULE_API_VERSION(0, 2)
54 #define GRALLOC_MODULE_API_VERSION_0_3 HARDWARE_MODULE_API_VERSION(0, 3)
55
56 #define GRALLOC_DEVICE_API_VERSION_0_1 HARDWARE_DEVICE_API_VERSION(0, 1)
57
58 /**
59 * The id of this module
60 */
61 #define GRALLOC_HARDWARE_MODULE_ID "gralloc"
62
63 /**
64 * Name of the graphics device to open
65 */
66
67 #define GRALLOC_HARDWARE_GPU0 "gpu0"
68
69 enum {
70 /* buffer is never read in software */
71 GRALLOC_USAGE_SW_READ_NEVER = 0x00000000U,
72 /* buffer is rarely read in software */
73 GRALLOC_USAGE_SW_READ_RARELY = 0x00000002U,
74 /* buffer is often read in software */
75 GRALLOC_USAGE_SW_READ_OFTEN = 0x00000003U,
76 /* mask for the software read values */
77 GRALLOC_USAGE_SW_READ_MASK = 0x0000000FU,
78
79 /* buffer is never written in software */
80 GRALLOC_USAGE_SW_WRITE_NEVER = 0x00000000U,
81 /* buffer is rarely written in software */
82 GRALLOC_USAGE_SW_WRITE_RARELY = 0x00000020U,
83 /* buffer is often written in software */
84 GRALLOC_USAGE_SW_WRITE_OFTEN = 0x00000030U,
85 /* mask for the software write values */
86 GRALLOC_USAGE_SW_WRITE_MASK = 0x000000F0U,
87
88 /* buffer will be used as an OpenGL ES texture */
89 GRALLOC_USAGE_HW_TEXTURE = 0x00000100U,
90 /* buffer will be used as an OpenGL ES render target */
91 GRALLOC_USAGE_HW_RENDER = 0x00000200U,
92 /* buffer will be used by the 2D hardware blitter */
93 GRALLOC_USAGE_HW_2D = 0x00000400U,
94 /* buffer will be used by the HWComposer HAL module */
95 GRALLOC_USAGE_HW_COMPOSER = 0x00000800U,
96 /* buffer will be used with the framebuffer device */
97 GRALLOC_USAGE_HW_FB = 0x00001000U,
98
99 /* buffer should be displayed full-screen on an external display when
100 * possible */
101 GRALLOC_USAGE_EXTERNAL_DISP = 0x00002000U,
102
103 /* Must have a hardware-protected path to external display sink for
104 * this buffer. If a hardware-protected path is not available, then
105 * either don't composite only this buffer (preferred) to the
106 * external sink, or (less desirable) do not route the entire
107 * composition to the external sink. */
108 GRALLOC_USAGE_PROTECTED = 0x00004000U,
109
110 /* buffer may be used as a cursor */
111 GRALLOC_USAGE_CURSOR = 0x00008000U,
112
113 /* buffer will be used with the HW video encoder */
114 GRALLOC_USAGE_HW_VIDEO_ENCODER = 0x00010000U,
115 /* buffer will be written by the HW camera pipeline */
116 GRALLOC_USAGE_HW_CAMERA_WRITE = 0x00020000U,
117 /* buffer will be read by the HW camera pipeline */
118 GRALLOC_USAGE_HW_CAMERA_READ = 0x00040000U,
119 /* buffer will be used as part of zero-shutter-lag queue */
120 GRALLOC_USAGE_HW_CAMERA_ZSL = 0x00060000U,
121 /* mask for the camera access values */
122 GRALLOC_USAGE_HW_CAMERA_MASK = 0x00060000U,
123 /* mask for the software usage bit-mask */
124 GRALLOC_USAGE_HW_MASK = 0x00071F00U,
125
126 /* buffer will be used as a RenderScript Allocation */
127 GRALLOC_USAGE_RENDERSCRIPT = 0x00100000U,
128
129 /* Set by the consumer to indicate to the producer that they may attach a
130 * buffer that they did not detach from the BufferQueue. Will be filtered
131 * out by GRALLOC_USAGE_ALLOC_MASK, so gralloc modules will not need to
132 * handle this flag. */
133 GRALLOC_USAGE_FOREIGN_BUFFERS = 0x00200000U,
134
135 /* Mask of all flags which could be passed to a gralloc module for buffer
136 * allocation. Any flags not in this mask do not need to be handled by
137 * gralloc modules. */
138 GRALLOC_USAGE_ALLOC_MASK = ~(GRALLOC_USAGE_FOREIGN_BUFFERS),
139
140 /* implementation-specific private usage flags */
141 GRALLOC_USAGE_PRIVATE_0 = 0x10000000U,
142 GRALLOC_USAGE_PRIVATE_1 = 0x20000000U,
143 GRALLOC_USAGE_PRIVATE_2 = 0x40000000U,
144 GRALLOC_USAGE_PRIVATE_3 = 0x80000000U,
145 GRALLOC_USAGE_PRIVATE_MASK = 0xF0000000U,
146 };
147
148 /*****************************************************************************/
149
150 /**
151 * Every hardware module must have a data structure named HAL_MODULE_INFO_SYM
152 * and the fields of this data structure must begin with hw_module_t
153 * followed by module specific information.
154 */
155 typedef struct gralloc_module_t {
156 struct hw_module_t common;
157
158 /*
159 * (*registerBuffer)() must be called before a buffer_handle_t that has not
160 * been created with (*alloc_device_t::alloc)() can be used.
161 *
162 * This is intended to be used with buffer_handle_t's that have been
163 * received in this process through IPC.
164 *
165 * This function checks that the handle is indeed a valid one and prepares
166 * it for use with (*lock)() and (*unlock)().
167 *
168 * It is not necessary to call (*registerBuffer)() on a handle created
169 * with (*alloc_device_t::alloc)().
170 *
171 * returns an error if this buffer_handle_t is not valid.
172 */
173 int (*registerBuffer)(struct gralloc_module_t const* module,
174 buffer_handle_t handle);
175
176 /*
177 * (*unregisterBuffer)() is called once this handle is no longer needed in
178 * this process. After this call, it is an error to call (*lock)(),
179 * (*unlock)(), or (*registerBuffer)().
180 *
181 * This function doesn't close or free the handle itself; this is done
182 * by other means, usually through libcutils's native_handle_close() and
183 * native_handle_free().
184 *
185 * It is an error to call (*unregisterBuffer)() on a buffer that wasn't
186 * explicitly registered first.
187 */
188 int (*unregisterBuffer)(struct gralloc_module_t const* module,
189 buffer_handle_t handle);
190
191 /*
192 * The (*lock)() method is called before a buffer is accessed for the
193 * specified usage. This call may block, for instance if the h/w needs
194 * to finish rendering or if CPU caches need to be synchronized.
195 *
196 * The caller promises to modify only pixels in the area specified
197 * by (l,t,w,h).
198 *
199 * The content of the buffer outside of the specified area is NOT modified
200 * by this call.
201 *
202 * If usage specifies GRALLOC_USAGE_SW_*, vaddr is filled with the address
203 * of the buffer in virtual memory.
204 *
205 * Note calling (*lock)() on HAL_PIXEL_FORMAT_YCbCr_*_888 buffers will fail
206 * and return -EINVAL. These buffers must be locked with (*lock_ycbcr)()
207 * instead.
208 *
209 * THREADING CONSIDERATIONS:
210 *
211 * It is legal for several different threads to lock a buffer from
212 * read access, none of the threads are blocked.
213 *
214 * However, locking a buffer simultaneously for write or read/write is
215 * undefined, but:
216 * - shall not result in termination of the process
217 * - shall not block the caller
218 * It is acceptable to return an error or to leave the buffer's content
219 * into an indeterminate state.
220 *
221 * If the buffer was created with a usage mask incompatible with the
222 * requested usage flags here, -EINVAL is returned.
223 *
224 */
225
226 int (*lock)(struct gralloc_module_t const* module,
227 buffer_handle_t handle, int usage,
228 int l, int t, int w, int h,
229 void** vaddr);
230
231
232 /*
233 * The (*unlock)() method must be called after all changes to the buffer
234 * are completed.
235 */
236
237 int (*unlock)(struct gralloc_module_t const* module,
238 buffer_handle_t handle);
239
240
241 /* reserved for future use */
242 int (*perform)(struct gralloc_module_t const* module,
243 int operation, ... );
244
245 /*
246 * The (*lock_ycbcr)() method is like the (*lock)() method, with the
247 * difference that it fills a struct ycbcr with a description of the buffer
248 * layout, and zeroes out the reserved fields.
249 *
250 * If the buffer format is not compatible with a flexible YUV format (e.g.
251 * the buffer layout cannot be represented with the ycbcr struct), it
252 * will return -EINVAL.
253 *
254 * This method must work on buffers with HAL_PIXEL_FORMAT_YCbCr_*_888
255 * if supported by the device, as well as with any other format that is
256 * requested by the multimedia codecs when they are configured with a
257 * flexible-YUV-compatible color-format with android native buffers.
258 *
259 * Note that this method may also be called on buffers of other formats,
260 * including non-YUV formats.
261 *
262 * Added in GRALLOC_MODULE_API_VERSION_0_2.
263 */
264
265 int (*lock_ycbcr)(struct gralloc_module_t const* module,
266 buffer_handle_t handle, int usage,
267 int l, int t, int w, int h,
268 struct android_ycbcr *ycbcr);
269
270 /*
271 * The (*lockAsync)() method is like the (*lock)() method except
272 * that the buffer's sync fence object is passed into the lock
273 * call instead of requiring the caller to wait for completion.
274 *
275 * The gralloc implementation takes ownership of the fenceFd and
276 * is responsible for closing it when no longer needed.
277 *
278 * Added in GRALLOC_MODULE_API_VERSION_0_3.
279 */
280 int (*lockAsync)(struct gralloc_module_t const* module,
281 buffer_handle_t handle, int usage,
282 int l, int t, int w, int h,
283 void** vaddr, int fenceFd);
284
285 /*
286 * The (*unlockAsync)() method is like the (*unlock)() method
287 * except that a buffer sync fence object is returned from the
288 * lock call, representing the completion of any pending work
289 * performed by the gralloc implementation.
290 *
291 * The caller takes ownership of the fenceFd and is responsible
292 * for closing it when no longer needed.
293 *
294 * Added in GRALLOC_MODULE_API_VERSION_0_3.
295 */
296 int (*unlockAsync)(struct gralloc_module_t const* module,
297 buffer_handle_t handle, int* fenceFd);
298
299 /*
300 * The (*lockAsync_ycbcr)() method is like the (*lock_ycbcr)()
301 * method except that the buffer's sync fence object is passed
302 * into the lock call instead of requiring the caller to wait for
303 * completion.
304 *
305 * The gralloc implementation takes ownership of the fenceFd and
306 * is responsible for closing it when no longer needed.
307 *
308 * Added in GRALLOC_MODULE_API_VERSION_0_3.
309 */
310 int (*lockAsync_ycbcr)(struct gralloc_module_t const* module,
311 buffer_handle_t handle, int usage,
312 int l, int t, int w, int h,
313 struct android_ycbcr *ycbcr, int fenceFd);
314
315 /* reserved for future use */
316 void* reserved_proc[3];
317 } gralloc_module_t;
318
319 /*****************************************************************************/
320
321 /**
322 * Every device data structure must begin with hw_device_t
323 * followed by module specific public methods and attributes.
324 */
325
326 typedef struct alloc_device_t {
327 struct hw_device_t common;
328
329 /*
330 * (*alloc)() Allocates a buffer in graphic memory with the requested
331 * parameters and returns a buffer_handle_t and the stride in pixels to
332 * allow the implementation to satisfy hardware constraints on the width
333 * of a pixmap (eg: it may have to be multiple of 8 pixels).
334 * The CALLER TAKES OWNERSHIP of the buffer_handle_t.
335 *
336 * If format is HAL_PIXEL_FORMAT_YCbCr_420_888, the returned stride must be
337 * 0, since the actual strides are available from the android_ycbcr
338 * structure.
339 *
340 * Returns 0 on success or -errno on error.
341 */
342
343 int (*alloc)(struct alloc_device_t* dev,
344 int w, int h, int format, int usage,
345 buffer_handle_t* handle, int* stride);
346
347 /*
348 * (*free)() Frees a previously allocated buffer.
349 * Behavior is undefined if the buffer is still mapped in any process,
350 * but shall not result in termination of the program or security breaches
351 * (allowing a process to get access to another process' buffers).
352 * THIS FUNCTION TAKES OWNERSHIP of the buffer_handle_t which becomes
353 * invalid after the call.
354 *
355 * Returns 0 on success or -errno on error.
356 */
357 int (*free)(struct alloc_device_t* dev,
358 buffer_handle_t handle);
359
360 /* This hook is OPTIONAL.
361 *
362 * If non NULL it will be caused by SurfaceFlinger on dumpsys
363 */
364 void (*dump)(struct alloc_device_t *dev, char *buff, int buff_len);
365
366 void* reserved_proc[7];
367 } alloc_device_t;
368
369
370 /** convenience API for opening and closing a supported device */
371
gralloc_open(const struct hw_module_t * module,struct alloc_device_t ** device)372 static inline int gralloc_open(const struct hw_module_t* module,
373 struct alloc_device_t** device) {
374 return module->methods->open(module,
375 GRALLOC_HARDWARE_GPU0, TO_HW_DEVICE_T_OPEN(device));
376 }
377
gralloc_close(struct alloc_device_t * device)378 static inline int gralloc_close(struct alloc_device_t* device) {
379 return device->common.close(&device->common);
380 }
381
382 /**
383 * map_usage_to_memtrack should be called after allocating a gralloc buffer.
384 *
385 * @param usage - it is the flag used when alloc function is called.
386 *
387 * This function maps the gralloc usage flags to appropriate memtrack bucket.
388 * GrallocHAL implementers and users should make an additional ION_IOCTL_TAG
389 * call using the memtrack tag returned by this function. This will help the
390 * in-kernel memtack to categorize the memory allocated by different processes
391 * according to their usage.
392 *
393 */
map_usage_to_memtrack(uint32_t usage)394 static inline const char* map_usage_to_memtrack(uint32_t usage) {
395 usage &= GRALLOC_USAGE_ALLOC_MASK;
396
397 if ((usage & GRALLOC_USAGE_HW_CAMERA_WRITE) != 0) {
398 return "camera";
399 } else if ((usage & GRALLOC_USAGE_HW_VIDEO_ENCODER) != 0 ||
400 (usage & GRALLOC_USAGE_EXTERNAL_DISP) != 0) {
401 return "video";
402 } else if ((usage & GRALLOC_USAGE_HW_RENDER) != 0 ||
403 (usage & GRALLOC_USAGE_HW_TEXTURE) != 0) {
404 return "gl";
405 } else if ((usage & GRALLOC_USAGE_HW_CAMERA_READ) != 0) {
406 return "camera";
407 } else if ((usage & GRALLOC_USAGE_SW_READ_MASK) != 0 ||
408 (usage & GRALLOC_USAGE_SW_WRITE_MASK) != 0) {
409 return "cpu";
410 }
411 return "graphics";
412 }
413
414 __END_DECLS
415
416 #endif // ANDROID_GRALLOC_INTERFACE_H
417