1 /* Copyright (c) 2011 Xiph.Org Foundation 2 Written by Jean-Marc Valin */ 3 /* 4 Redistribution and use in source and binary forms, with or without 5 modification, are permitted provided that the following conditions 6 are met: 7 8 - Redistributions of source code must retain the above copyright 9 notice, this list of conditions and the following disclaimer. 10 11 - Redistributions in binary form must reproduce the above copyright 12 notice, this list of conditions and the following disclaimer in the 13 documentation and/or other materials provided with the distribution. 14 15 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 16 ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 17 LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 18 A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER 19 OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 20 EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 21 PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 22 PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 23 LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 24 NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 25 SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 26 */ 27 28 /** 29 * @file opus_multistream.h 30 * @brief Opus reference implementation multistream API 31 */ 32 33 #ifndef OPUS_MULTISTREAM_H 34 #define OPUS_MULTISTREAM_H 35 36 #include "opus.h" 37 38 #ifdef __cplusplus 39 extern "C" { 40 #endif 41 42 /** @cond OPUS_INTERNAL_DOC */ 43 44 /** Macros to trigger compilation errors when the wrong types are provided to a 45 * CTL. */ 46 /**@{*/ 47 #define __opus_check_encstate_ptr(ptr) ((ptr) + ((ptr) - (OpusEncoder**)(ptr))) 48 #define __opus_check_decstate_ptr(ptr) ((ptr) + ((ptr) - (OpusDecoder**)(ptr))) 49 /**@}*/ 50 51 /** These are the actual encoder and decoder CTL ID numbers. 52 * They should not be used directly by applications. 53 * In general, SETs should be even and GETs should be odd.*/ 54 /**@{*/ 55 #define OPUS_MULTISTREAM_GET_ENCODER_STATE_REQUEST 5120 56 #define OPUS_MULTISTREAM_GET_DECODER_STATE_REQUEST 5122 57 /**@}*/ 58 59 /** @endcond */ 60 61 /** @defgroup opus_multistream_ctls Multistream specific encoder and decoder CTLs 62 * 63 * These are convenience macros that are specific to the 64 * opus_multistream_encoder_ctl() and opus_multistream_decoder_ctl() 65 * interface. 66 * The CTLs from @ref opus_genericctls, @ref opus_encoderctls, and 67 * @ref opus_decoderctls may be applied to a multistream encoder or decoder as 68 * well. 69 * In addition, you may retrieve the encoder or decoder state for an specific 70 * stream via #OPUS_MULTISTREAM_GET_ENCODER_STATE or 71 * #OPUS_MULTISTREAM_GET_DECODER_STATE and apply CTLs to it individually. 72 */ 73 /**@{*/ 74 75 /** Gets the encoder state for an individual stream of a multistream encoder. 76 * @param[in] x <tt>opus_int32</tt>: The index of the stream whose encoder you 77 * wish to retrieve. 78 * This must be non-negative and less than 79 * the <code>streams</code> parameter used 80 * to initialize the encoder. 81 * @param[out] y <tt>OpusEncoder**</tt>: Returns a pointer to the given 82 * encoder state. 83 * @retval OPUS_BAD_ARG The index of the requested stream was out of range. 84 * @hideinitializer 85 */ 86 #define OPUS_MULTISTREAM_GET_ENCODER_STATE(x,y) OPUS_MULTISTREAM_GET_ENCODER_STATE_REQUEST, __opus_check_int(x), __opus_check_encstate_ptr(y) 87 88 /** Gets the decoder state for an individual stream of a multistream decoder. 89 * @param[in] x <tt>opus_int32</tt>: The index of the stream whose decoder you 90 * wish to retrieve. 91 * This must be non-negative and less than 92 * the <code>streams</code> parameter used 93 * to initialize the decoder. 94 * @param[out] y <tt>OpusDecoder**</tt>: Returns a pointer to the given 95 * decoder state. 96 * @retval OPUS_BAD_ARG The index of the requested stream was out of range. 97 * @hideinitializer 98 */ 99 #define OPUS_MULTISTREAM_GET_DECODER_STATE(x,y) OPUS_MULTISTREAM_GET_DECODER_STATE_REQUEST, __opus_check_int(x), __opus_check_decstate_ptr(y) 100 101 /**@}*/ 102 103 /** @defgroup opus_multistream Opus Multistream API 104 * @{ 105 * 106 * The multistream API allows individual Opus streams to be combined into a 107 * single packet, enabling support for up to 255 channels. Unlike an 108 * elementary Opus stream, the encoder and decoder must negotiate the channel 109 * configuration before the decoder can successfully interpret the data in the 110 * packets produced by the encoder. Some basic information, such as packet 111 * duration, can be computed without any special negotiation. 112 * 113 * The format for multistream Opus packets is defined in 114 * <a href="https://tools.ietf.org/html/rfc7845">RFC 7845</a> 115 * and is based on the self-delimited Opus framing described in Appendix B of 116 * <a href="https://tools.ietf.org/html/rfc6716">RFC 6716</a>. 117 * Normal Opus packets are just a degenerate case of multistream Opus packets, 118 * and can be encoded or decoded with the multistream API by setting 119 * <code>streams</code> to <code>1</code> when initializing the encoder or 120 * decoder. 121 * 122 * Multistream Opus streams can contain up to 255 elementary Opus streams. 123 * These may be either "uncoupled" or "coupled", indicating that the decoder 124 * is configured to decode them to either 1 or 2 channels, respectively. 125 * The streams are ordered so that all coupled streams appear at the 126 * beginning. 127 * 128 * A <code>mapping</code> table defines which decoded channel <code>i</code> 129 * should be used for each input/output (I/O) channel <code>j</code>. This table is 130 * typically provided as an unsigned char array. 131 * Let <code>i = mapping[j]</code> be the index for I/O channel <code>j</code>. 132 * If <code>i < 2*coupled_streams</code>, then I/O channel <code>j</code> is 133 * encoded as the left channel of stream <code>(i/2)</code> if <code>i</code> 134 * is even, or as the right channel of stream <code>(i/2)</code> if 135 * <code>i</code> is odd. Otherwise, I/O channel <code>j</code> is encoded as 136 * mono in stream <code>(i - coupled_streams)</code>, unless it has the special 137 * value 255, in which case it is omitted from the encoding entirely (the 138 * decoder will reproduce it as silence). Each value <code>i</code> must either 139 * be the special value 255 or be less than <code>streams + coupled_streams</code>. 140 * 141 * The output channels specified by the encoder 142 * should use the 143 * <a href="https://www.xiph.org/vorbis/doc/Vorbis_I_spec.html#x1-810004.3.9">Vorbis 144 * channel ordering</a>. A decoder may wish to apply an additional permutation 145 * to the mapping the encoder used to achieve a different output channel 146 * order (e.g. for outputing in WAV order). 147 * 148 * Each multistream packet contains an Opus packet for each stream, and all of 149 * the Opus packets in a single multistream packet must have the same 150 * duration. Therefore the duration of a multistream packet can be extracted 151 * from the TOC sequence of the first stream, which is located at the 152 * beginning of the packet, just like an elementary Opus stream: 153 * 154 * @code 155 * int nb_samples; 156 * int nb_frames; 157 * nb_frames = opus_packet_get_nb_frames(data, len); 158 * if (nb_frames < 1) 159 * return nb_frames; 160 * nb_samples = opus_packet_get_samples_per_frame(data, 48000) * nb_frames; 161 * @endcode 162 * 163 * The general encoding and decoding process proceeds exactly the same as in 164 * the normal @ref opus_encoder and @ref opus_decoder APIs. 165 * See their documentation for an overview of how to use the corresponding 166 * multistream functions. 167 */ 168 169 /** Opus multistream encoder state. 170 * This contains the complete state of a multistream Opus encoder. 171 * It is position independent and can be freely copied. 172 * @see opus_multistream_encoder_create 173 * @see opus_multistream_encoder_init 174 */ 175 typedef struct OpusMSEncoder OpusMSEncoder; 176 177 /** Opus multistream decoder state. 178 * This contains the complete state of a multistream Opus decoder. 179 * It is position independent and can be freely copied. 180 * @see opus_multistream_decoder_create 181 * @see opus_multistream_decoder_init 182 */ 183 typedef struct OpusMSDecoder OpusMSDecoder; 184 185 /**\name Multistream encoder functions */ 186 /**@{*/ 187 188 /** Gets the size of an OpusMSEncoder structure. 189 * @param streams <tt>int</tt>: The total number of streams to encode from the 190 * input. 191 * This must be no more than 255. 192 * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams 193 * to encode. 194 * This must be no larger than the total 195 * number of streams. 196 * Additionally, The total number of 197 * encoded channels (<code>streams + 198 * coupled_streams</code>) must be no 199 * more than 255. 200 * @returns The size in bytes on success, or a negative error code 201 * (see @ref opus_errorcodes) on error. 202 */ 203 OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_encoder_get_size( 204 int streams, 205 int coupled_streams 206 ); 207 208 OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_surround_encoder_get_size( 209 int channels, 210 int mapping_family 211 ); 212 213 214 /** Allocates and initializes a multistream encoder state. 215 * Call opus_multistream_encoder_destroy() to release 216 * this object when finished. 217 * @param Fs <tt>opus_int32</tt>: Sampling rate of the input signal (in Hz). 218 * This must be one of 8000, 12000, 16000, 219 * 24000, or 48000. 220 * @param channels <tt>int</tt>: Number of channels in the input signal. 221 * This must be at most 255. 222 * It may be greater than the number of 223 * coded channels (<code>streams + 224 * coupled_streams</code>). 225 * @param streams <tt>int</tt>: The total number of streams to encode from the 226 * input. 227 * This must be no more than the number of channels. 228 * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams 229 * to encode. 230 * This must be no larger than the total 231 * number of streams. 232 * Additionally, The total number of 233 * encoded channels (<code>streams + 234 * coupled_streams</code>) must be no 235 * more than the number of input channels. 236 * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from 237 * encoded channels to input channels, as described in 238 * @ref opus_multistream. As an extra constraint, the 239 * multistream encoder does not allow encoding coupled 240 * streams for which one channel is unused since this 241 * is never a good idea. 242 * @param application <tt>int</tt>: The target encoder application. 243 * This must be one of the following: 244 * <dl> 245 * <dt>#OPUS_APPLICATION_VOIP</dt> 246 * <dd>Process signal for improved speech intelligibility.</dd> 247 * <dt>#OPUS_APPLICATION_AUDIO</dt> 248 * <dd>Favor faithfulness to the original input.</dd> 249 * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt> 250 * <dd>Configure the minimum possible coding delay by disabling certain modes 251 * of operation.</dd> 252 * </dl> 253 * @param[out] error <tt>int *</tt>: Returns #OPUS_OK on success, or an error 254 * code (see @ref opus_errorcodes) on 255 * failure. 256 */ 257 OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusMSEncoder *opus_multistream_encoder_create( 258 opus_int32 Fs, 259 int channels, 260 int streams, 261 int coupled_streams, 262 const unsigned char *mapping, 263 int application, 264 int *error 265 ) OPUS_ARG_NONNULL(5); 266 267 OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusMSEncoder *opus_multistream_surround_encoder_create( 268 opus_int32 Fs, 269 int channels, 270 int mapping_family, 271 int *streams, 272 int *coupled_streams, 273 unsigned char *mapping, 274 int application, 275 int *error 276 ) OPUS_ARG_NONNULL(5); 277 278 /** Initialize a previously allocated multistream encoder state. 279 * The memory pointed to by \a st must be at least the size returned by 280 * opus_multistream_encoder_get_size(). 281 * This is intended for applications which use their own allocator instead of 282 * malloc. 283 * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL. 284 * @see opus_multistream_encoder_create 285 * @see opus_multistream_encoder_get_size 286 * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state to initialize. 287 * @param Fs <tt>opus_int32</tt>: Sampling rate of the input signal (in Hz). 288 * This must be one of 8000, 12000, 16000, 289 * 24000, or 48000. 290 * @param channels <tt>int</tt>: Number of channels in the input signal. 291 * This must be at most 255. 292 * It may be greater than the number of 293 * coded channels (<code>streams + 294 * coupled_streams</code>). 295 * @param streams <tt>int</tt>: The total number of streams to encode from the 296 * input. 297 * This must be no more than the number of channels. 298 * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams 299 * to encode. 300 * This must be no larger than the total 301 * number of streams. 302 * Additionally, The total number of 303 * encoded channels (<code>streams + 304 * coupled_streams</code>) must be no 305 * more than the number of input channels. 306 * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from 307 * encoded channels to input channels, as described in 308 * @ref opus_multistream. As an extra constraint, the 309 * multistream encoder does not allow encoding coupled 310 * streams for which one channel is unused since this 311 * is never a good idea. 312 * @param application <tt>int</tt>: The target encoder application. 313 * This must be one of the following: 314 * <dl> 315 * <dt>#OPUS_APPLICATION_VOIP</dt> 316 * <dd>Process signal for improved speech intelligibility.</dd> 317 * <dt>#OPUS_APPLICATION_AUDIO</dt> 318 * <dd>Favor faithfulness to the original input.</dd> 319 * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt> 320 * <dd>Configure the minimum possible coding delay by disabling certain modes 321 * of operation.</dd> 322 * </dl> 323 * @returns #OPUS_OK on success, or an error code (see @ref opus_errorcodes) 324 * on failure. 325 */ 326 OPUS_EXPORT int opus_multistream_encoder_init( 327 OpusMSEncoder *st, 328 opus_int32 Fs, 329 int channels, 330 int streams, 331 int coupled_streams, 332 const unsigned char *mapping, 333 int application 334 ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(6); 335 336 OPUS_EXPORT int opus_multistream_surround_encoder_init( 337 OpusMSEncoder *st, 338 opus_int32 Fs, 339 int channels, 340 int mapping_family, 341 int *streams, 342 int *coupled_streams, 343 unsigned char *mapping, 344 int application 345 ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(6); 346 347 /** Encodes a multistream Opus frame. 348 * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state. 349 * @param[in] pcm <tt>const opus_int16*</tt>: The input signal as interleaved 350 * samples. 351 * This must contain 352 * <code>frame_size*channels</code> 353 * samples. 354 * @param frame_size <tt>int</tt>: Number of samples per channel in the input 355 * signal. 356 * This must be an Opus frame size for the 357 * encoder's sampling rate. 358 * For example, at 48 kHz the permitted values 359 * are 120, 240, 480, 960, 1920, and 2880. 360 * Passing in a duration of less than 10 ms 361 * (480 samples at 48 kHz) will prevent the 362 * encoder from using the LPC or hybrid modes. 363 * @param[out] data <tt>unsigned char*</tt>: Output payload. 364 * This must contain storage for at 365 * least \a max_data_bytes. 366 * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated 367 * memory for the output 368 * payload. This may be 369 * used to impose an upper limit on 370 * the instant bitrate, but should 371 * not be used as the only bitrate 372 * control. Use #OPUS_SET_BITRATE to 373 * control the bitrate. 374 * @returns The length of the encoded packet (in bytes) on success or a 375 * negative error code (see @ref opus_errorcodes) on failure. 376 */ 377 OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_encode( 378 OpusMSEncoder *st, 379 const opus_int16 *pcm, 380 int frame_size, 381 unsigned char *data, 382 opus_int32 max_data_bytes 383 ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4); 384 385 /** Encodes a multistream Opus frame from floating point input. 386 * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state. 387 * @param[in] pcm <tt>const float*</tt>: The input signal as interleaved 388 * samples with a normal range of 389 * +/-1.0. 390 * Samples with a range beyond +/-1.0 391 * are supported but will be clipped by 392 * decoders using the integer API and 393 * should only be used if it is known 394 * that the far end supports extended 395 * dynamic range. 396 * This must contain 397 * <code>frame_size*channels</code> 398 * samples. 399 * @param frame_size <tt>int</tt>: Number of samples per channel in the input 400 * signal. 401 * This must be an Opus frame size for the 402 * encoder's sampling rate. 403 * For example, at 48 kHz the permitted values 404 * are 120, 240, 480, 960, 1920, and 2880. 405 * Passing in a duration of less than 10 ms 406 * (480 samples at 48 kHz) will prevent the 407 * encoder from using the LPC or hybrid modes. 408 * @param[out] data <tt>unsigned char*</tt>: Output payload. 409 * This must contain storage for at 410 * least \a max_data_bytes. 411 * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated 412 * memory for the output 413 * payload. This may be 414 * used to impose an upper limit on 415 * the instant bitrate, but should 416 * not be used as the only bitrate 417 * control. Use #OPUS_SET_BITRATE to 418 * control the bitrate. 419 * @returns The length of the encoded packet (in bytes) on success or a 420 * negative error code (see @ref opus_errorcodes) on failure. 421 */ 422 OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_encode_float( 423 OpusMSEncoder *st, 424 const float *pcm, 425 int frame_size, 426 unsigned char *data, 427 opus_int32 max_data_bytes 428 ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4); 429 430 /** Frees an <code>OpusMSEncoder</code> allocated by 431 * opus_multistream_encoder_create(). 432 * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state to be freed. 433 */ 434 OPUS_EXPORT void opus_multistream_encoder_destroy(OpusMSEncoder *st); 435 436 /** Perform a CTL function on a multistream Opus encoder. 437 * 438 * Generally the request and subsequent arguments are generated by a 439 * convenience macro. 440 * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state. 441 * @param request This and all remaining parameters should be replaced by one 442 * of the convenience macros in @ref opus_genericctls, 443 * @ref opus_encoderctls, or @ref opus_multistream_ctls. 444 * @see opus_genericctls 445 * @see opus_encoderctls 446 * @see opus_multistream_ctls 447 */ 448 OPUS_EXPORT int opus_multistream_encoder_ctl(OpusMSEncoder *st, int request, ...) OPUS_ARG_NONNULL(1); 449 450 /**@}*/ 451 452 /**\name Multistream decoder functions */ 453 /**@{*/ 454 455 /** Gets the size of an <code>OpusMSDecoder</code> structure. 456 * @param streams <tt>int</tt>: The total number of streams coded in the 457 * input. 458 * This must be no more than 255. 459 * @param coupled_streams <tt>int</tt>: Number streams to decode as coupled 460 * (2 channel) streams. 461 * This must be no larger than the total 462 * number of streams. 463 * Additionally, The total number of 464 * coded channels (<code>streams + 465 * coupled_streams</code>) must be no 466 * more than 255. 467 * @returns The size in bytes on success, or a negative error code 468 * (see @ref opus_errorcodes) on error. 469 */ 470 OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_decoder_get_size( 471 int streams, 472 int coupled_streams 473 ); 474 475 /** Allocates and initializes a multistream decoder state. 476 * Call opus_multistream_decoder_destroy() to release 477 * this object when finished. 478 * @param Fs <tt>opus_int32</tt>: Sampling rate to decode at (in Hz). 479 * This must be one of 8000, 12000, 16000, 480 * 24000, or 48000. 481 * @param channels <tt>int</tt>: Number of channels to output. 482 * This must be at most 255. 483 * It may be different from the number of coded 484 * channels (<code>streams + 485 * coupled_streams</code>). 486 * @param streams <tt>int</tt>: The total number of streams coded in the 487 * input. 488 * This must be no more than 255. 489 * @param coupled_streams <tt>int</tt>: Number of streams to decode as coupled 490 * (2 channel) streams. 491 * This must be no larger than the total 492 * number of streams. 493 * Additionally, The total number of 494 * coded channels (<code>streams + 495 * coupled_streams</code>) must be no 496 * more than 255. 497 * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from 498 * coded channels to output channels, as described in 499 * @ref opus_multistream. 500 * @param[out] error <tt>int *</tt>: Returns #OPUS_OK on success, or an error 501 * code (see @ref opus_errorcodes) on 502 * failure. 503 */ 504 OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusMSDecoder *opus_multistream_decoder_create( 505 opus_int32 Fs, 506 int channels, 507 int streams, 508 int coupled_streams, 509 const unsigned char *mapping, 510 int *error 511 ) OPUS_ARG_NONNULL(5); 512 513 /** Intialize a previously allocated decoder state object. 514 * The memory pointed to by \a st must be at least the size returned by 515 * opus_multistream_encoder_get_size(). 516 * This is intended for applications which use their own allocator instead of 517 * malloc. 518 * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL. 519 * @see opus_multistream_decoder_create 520 * @see opus_multistream_deocder_get_size 521 * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state to initialize. 522 * @param Fs <tt>opus_int32</tt>: Sampling rate to decode at (in Hz). 523 * This must be one of 8000, 12000, 16000, 524 * 24000, or 48000. 525 * @param channels <tt>int</tt>: Number of channels to output. 526 * This must be at most 255. 527 * It may be different from the number of coded 528 * channels (<code>streams + 529 * coupled_streams</code>). 530 * @param streams <tt>int</tt>: The total number of streams coded in the 531 * input. 532 * This must be no more than 255. 533 * @param coupled_streams <tt>int</tt>: Number of streams to decode as coupled 534 * (2 channel) streams. 535 * This must be no larger than the total 536 * number of streams. 537 * Additionally, The total number of 538 * coded channels (<code>streams + 539 * coupled_streams</code>) must be no 540 * more than 255. 541 * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from 542 * coded channels to output channels, as described in 543 * @ref opus_multistream. 544 * @returns #OPUS_OK on success, or an error code (see @ref opus_errorcodes) 545 * on failure. 546 */ 547 OPUS_EXPORT int opus_multistream_decoder_init( 548 OpusMSDecoder *st, 549 opus_int32 Fs, 550 int channels, 551 int streams, 552 int coupled_streams, 553 const unsigned char *mapping 554 ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(6); 555 556 /** Decode a multistream Opus packet. 557 * @param st <tt>OpusMSDecoder*</tt>: Multistream decoder state. 558 * @param[in] data <tt>const unsigned char*</tt>: Input payload. 559 * Use a <code>NULL</code> 560 * pointer to indicate packet 561 * loss. 562 * @param len <tt>opus_int32</tt>: Number of bytes in payload. 563 * @param[out] pcm <tt>opus_int16*</tt>: Output signal, with interleaved 564 * samples. 565 * This must contain room for 566 * <code>frame_size*channels</code> 567 * samples. 568 * @param frame_size <tt>int</tt>: The number of samples per channel of 569 * available space in \a pcm. 570 * If this is less than the maximum packet duration 571 * (120 ms; 5760 for 48kHz), this function will not be capable 572 * of decoding some packets. In the case of PLC (data==NULL) 573 * or FEC (decode_fec=1), then frame_size needs to be exactly 574 * the duration of audio that is missing, otherwise the 575 * decoder will not be in the optimal state to decode the 576 * next incoming packet. For the PLC and FEC cases, frame_size 577 * <b>must</b> be a multiple of 2.5 ms. 578 * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band 579 * forward error correction data be decoded. 580 * If no such data is available, the frame is 581 * decoded as if it were lost. 582 * @returns Number of samples decoded on success or a negative error code 583 * (see @ref opus_errorcodes) on failure. 584 */ 585 OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_decode( 586 OpusMSDecoder *st, 587 const unsigned char *data, 588 opus_int32 len, 589 opus_int16 *pcm, 590 int frame_size, 591 int decode_fec 592 ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); 593 594 /** Decode a multistream Opus packet with floating point output. 595 * @param st <tt>OpusMSDecoder*</tt>: Multistream decoder state. 596 * @param[in] data <tt>const unsigned char*</tt>: Input payload. 597 * Use a <code>NULL</code> 598 * pointer to indicate packet 599 * loss. 600 * @param len <tt>opus_int32</tt>: Number of bytes in payload. 601 * @param[out] pcm <tt>opus_int16*</tt>: Output signal, with interleaved 602 * samples. 603 * This must contain room for 604 * <code>frame_size*channels</code> 605 * samples. 606 * @param frame_size <tt>int</tt>: The number of samples per channel of 607 * available space in \a pcm. 608 * If this is less than the maximum packet duration 609 * (120 ms; 5760 for 48kHz), this function will not be capable 610 * of decoding some packets. In the case of PLC (data==NULL) 611 * or FEC (decode_fec=1), then frame_size needs to be exactly 612 * the duration of audio that is missing, otherwise the 613 * decoder will not be in the optimal state to decode the 614 * next incoming packet. For the PLC and FEC cases, frame_size 615 * <b>must</b> be a multiple of 2.5 ms. 616 * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band 617 * forward error correction data be decoded. 618 * If no such data is available, the frame is 619 * decoded as if it were lost. 620 * @returns Number of samples decoded on success or a negative error code 621 * (see @ref opus_errorcodes) on failure. 622 */ 623 OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_decode_float( 624 OpusMSDecoder *st, 625 const unsigned char *data, 626 opus_int32 len, 627 float *pcm, 628 int frame_size, 629 int decode_fec 630 ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); 631 632 /** Perform a CTL function on a multistream Opus decoder. 633 * 634 * Generally the request and subsequent arguments are generated by a 635 * convenience macro. 636 * @param st <tt>OpusMSDecoder*</tt>: Multistream decoder state. 637 * @param request This and all remaining parameters should be replaced by one 638 * of the convenience macros in @ref opus_genericctls, 639 * @ref opus_decoderctls, or @ref opus_multistream_ctls. 640 * @see opus_genericctls 641 * @see opus_decoderctls 642 * @see opus_multistream_ctls 643 */ 644 OPUS_EXPORT int opus_multistream_decoder_ctl(OpusMSDecoder *st, int request, ...) OPUS_ARG_NONNULL(1); 645 646 /** Frees an <code>OpusMSDecoder</code> allocated by 647 * opus_multistream_decoder_create(). 648 * @param st <tt>OpusMSDecoder</tt>: Multistream decoder state to be freed. 649 */ 650 OPUS_EXPORT void opus_multistream_decoder_destroy(OpusMSDecoder *st); 651 652 /**@}*/ 653 654 /**@}*/ 655 656 #ifdef __cplusplus 657 } 658 #endif 659 660 #endif /* OPUS_MULTISTREAM_H */ 661