• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * Copyright © 2010 Intel Corporation
3  *
4  * Permission is hereby granted, free of charge, to any person obtaining a
5  * copy of this software and associated documentation files (the "Software"),
6  * to deal in the Software without restriction, including without limitation
7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8  * and/or sell copies of the Software, and to permit persons to whom the
9  * Software is furnished to do so, subject to the following conditions:
10  *
11  * The above copyright notice and this permission notice (including the next
12  * paragraph) shall be included in all copies or substantial portions of the
13  * Software.
14  *
15  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
18  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
21  * IN THE SOFTWARE.
22  */
23 
24 /** @file brw_fs_generator.cpp
25  *
26  * This file supports generating code from the FS LIR to the actual
27  * native instructions.
28  */
29 
30 #include "brw_eu.h"
31 #include "brw_fs.h"
32 #include "brw_cfg.h"
33 #include "brw_program.h"
34 
35 static enum brw_reg_file
brw_file_from_reg(fs_reg * reg)36 brw_file_from_reg(fs_reg *reg)
37 {
38    switch (reg->file) {
39    case ARF:
40       return BRW_ARCHITECTURE_REGISTER_FILE;
41    case FIXED_GRF:
42    case VGRF:
43       return BRW_GENERAL_REGISTER_FILE;
44    case MRF:
45       return BRW_MESSAGE_REGISTER_FILE;
46    case IMM:
47       return BRW_IMMEDIATE_VALUE;
48    case BAD_FILE:
49    case ATTR:
50    case UNIFORM:
51       unreachable("not reached");
52    }
53    return BRW_ARCHITECTURE_REGISTER_FILE;
54 }
55 
56 static struct brw_reg
brw_reg_from_fs_reg(fs_inst * inst,fs_reg * reg,unsigned gen,bool compressed)57 brw_reg_from_fs_reg(fs_inst *inst, fs_reg *reg, unsigned gen, bool compressed)
58 {
59    struct brw_reg brw_reg;
60 
61    switch (reg->file) {
62    case MRF:
63       assert((reg->nr & ~BRW_MRF_COMPR4) < BRW_MAX_MRF(gen));
64       /* Fallthrough */
65    case VGRF:
66       if (reg->stride == 0) {
67          brw_reg = brw_vec1_reg(brw_file_from_reg(reg), reg->nr, 0);
68       } else {
69          /* From the Haswell PRM:
70           *
71           *  "VertStride must be used to cross GRF register boundaries. This
72           *   rule implies that elements within a 'Width' cannot cross GRF
73           *   boundaries."
74           *
75           * The maximum width value that could satisfy this restriction is:
76           */
77          const unsigned reg_width = REG_SIZE / (reg->stride * type_sz(reg->type));
78 
79          /* Because the hardware can only split source regions at a whole
80           * multiple of width during decompression (i.e. vertically), clamp
81           * the value obtained above to the physical execution size of a
82           * single decompressed chunk of the instruction:
83           */
84          const unsigned phys_width = compressed ? inst->exec_size / 2 :
85                                      inst->exec_size;
86 
87          /* XXX - The equation above is strictly speaking not correct on
88           *       hardware that supports unbalanced GRF writes -- On Gen9+
89           *       each decompressed chunk of the instruction may have a
90           *       different execution size when the number of components
91           *       written to each destination GRF is not the same.
92           */
93          const unsigned width = MIN2(reg_width, phys_width);
94          brw_reg = brw_vecn_reg(width, brw_file_from_reg(reg), reg->nr, 0);
95          brw_reg = stride(brw_reg, width * reg->stride, width, reg->stride);
96       }
97 
98       brw_reg = retype(brw_reg, reg->type);
99       brw_reg = byte_offset(brw_reg, reg->offset);
100       brw_reg.abs = reg->abs;
101       brw_reg.negate = reg->negate;
102       break;
103    case ARF:
104    case FIXED_GRF:
105    case IMM:
106       assert(reg->offset == 0);
107       brw_reg = reg->as_brw_reg();
108       break;
109    case BAD_FILE:
110       /* Probably unused. */
111       brw_reg = brw_null_reg();
112       break;
113    case ATTR:
114    case UNIFORM:
115       unreachable("not reached");
116    }
117 
118    return brw_reg;
119 }
120 
fs_generator(const struct brw_compiler * compiler,void * log_data,void * mem_ctx,const void * key,struct brw_stage_prog_data * prog_data,unsigned promoted_constants,bool runtime_check_aads_emit,gl_shader_stage stage)121 fs_generator::fs_generator(const struct brw_compiler *compiler, void *log_data,
122                            void *mem_ctx,
123                            const void *key,
124                            struct brw_stage_prog_data *prog_data,
125                            unsigned promoted_constants,
126                            bool runtime_check_aads_emit,
127                            gl_shader_stage stage)
128 
129    : compiler(compiler), log_data(log_data),
130      devinfo(compiler->devinfo), key(key),
131      prog_data(prog_data),
132      promoted_constants(promoted_constants),
133      runtime_check_aads_emit(runtime_check_aads_emit), debug_flag(false),
134      stage(stage), mem_ctx(mem_ctx)
135 {
136    p = rzalloc(mem_ctx, struct brw_codegen);
137    brw_init_codegen(devinfo, p, mem_ctx);
138 }
139 
~fs_generator()140 fs_generator::~fs_generator()
141 {
142 }
143 
144 class ip_record : public exec_node {
145 public:
146    DECLARE_RALLOC_CXX_OPERATORS(ip_record)
147 
ip_record(int ip)148    ip_record(int ip)
149    {
150       this->ip = ip;
151    }
152 
153    int ip;
154 };
155 
156 bool
patch_discard_jumps_to_fb_writes()157 fs_generator::patch_discard_jumps_to_fb_writes()
158 {
159    if (devinfo->gen < 6 || this->discard_halt_patches.is_empty())
160       return false;
161 
162    int scale = brw_jump_scale(p->devinfo);
163 
164    /* There is a somewhat strange undocumented requirement of using
165     * HALT, according to the simulator.  If some channel has HALTed to
166     * a particular UIP, then by the end of the program, every channel
167     * must have HALTed to that UIP.  Furthermore, the tracking is a
168     * stack, so you can't do the final halt of a UIP after starting
169     * halting to a new UIP.
170     *
171     * Symptoms of not emitting this instruction on actual hardware
172     * included GPU hangs and sparkly rendering on the piglit discard
173     * tests.
174     */
175    brw_inst *last_halt = gen6_HALT(p);
176    brw_inst_set_uip(p->devinfo, last_halt, 1 * scale);
177    brw_inst_set_jip(p->devinfo, last_halt, 1 * scale);
178 
179    int ip = p->nr_insn;
180 
181    foreach_in_list(ip_record, patch_ip, &discard_halt_patches) {
182       brw_inst *patch = &p->store[patch_ip->ip];
183 
184       assert(brw_inst_opcode(p->devinfo, patch) == BRW_OPCODE_HALT);
185       /* HALT takes a half-instruction distance from the pre-incremented IP. */
186       brw_inst_set_uip(p->devinfo, patch, (ip - patch_ip->ip) * scale);
187    }
188 
189    this->discard_halt_patches.make_empty();
190    return true;
191 }
192 
193 void
fire_fb_write(fs_inst * inst,struct brw_reg payload,struct brw_reg implied_header,GLuint nr)194 fs_generator::fire_fb_write(fs_inst *inst,
195                             struct brw_reg payload,
196                             struct brw_reg implied_header,
197                             GLuint nr)
198 {
199    uint32_t msg_control;
200 
201    struct brw_wm_prog_data *prog_data = brw_wm_prog_data(this->prog_data);
202 
203    if (devinfo->gen < 6) {
204       brw_push_insn_state(p);
205       brw_set_default_exec_size(p, BRW_EXECUTE_8);
206       brw_set_default_mask_control(p, BRW_MASK_DISABLE);
207       brw_set_default_predicate_control(p, BRW_PREDICATE_NONE);
208       brw_set_default_compression_control(p, BRW_COMPRESSION_NONE);
209       brw_MOV(p, offset(payload, 1), brw_vec8_grf(1, 0));
210       brw_pop_insn_state(p);
211    }
212 
213    if (inst->opcode == FS_OPCODE_REP_FB_WRITE)
214       msg_control = BRW_DATAPORT_RENDER_TARGET_WRITE_SIMD16_SINGLE_SOURCE_REPLICATED;
215    else if (prog_data->dual_src_blend) {
216       if (!inst->group)
217          msg_control = BRW_DATAPORT_RENDER_TARGET_WRITE_SIMD8_DUAL_SOURCE_SUBSPAN01;
218       else
219          msg_control = BRW_DATAPORT_RENDER_TARGET_WRITE_SIMD8_DUAL_SOURCE_SUBSPAN23;
220    } else if (inst->exec_size == 16)
221       msg_control = BRW_DATAPORT_RENDER_TARGET_WRITE_SIMD16_SINGLE_SOURCE;
222    else
223       msg_control = BRW_DATAPORT_RENDER_TARGET_WRITE_SIMD8_SINGLE_SOURCE_SUBSPAN01;
224 
225    uint32_t surf_index =
226       prog_data->binding_table.render_target_start + inst->target;
227 
228    bool last_render_target = inst->eot ||
229                              (prog_data->dual_src_blend && dispatch_width == 16);
230 
231 
232    brw_fb_WRITE(p,
233                 payload,
234                 implied_header,
235                 msg_control,
236                 surf_index,
237                 nr,
238                 0,
239                 inst->eot,
240                 last_render_target,
241                 inst->header_size != 0);
242 
243    brw_mark_surface_used(&prog_data->base, surf_index);
244 }
245 
246 void
generate_fb_write(fs_inst * inst,struct brw_reg payload)247 fs_generator::generate_fb_write(fs_inst *inst, struct brw_reg payload)
248 {
249    struct brw_wm_prog_data *prog_data = brw_wm_prog_data(this->prog_data);
250    const brw_wm_prog_key * const key = (brw_wm_prog_key * const) this->key;
251    struct brw_reg implied_header;
252 
253    if (devinfo->gen < 8 && !devinfo->is_haswell) {
254       brw_set_default_predicate_control(p, BRW_PREDICATE_NONE);
255    }
256 
257    if (inst->base_mrf >= 0)
258       payload = brw_message_reg(inst->base_mrf);
259 
260    /* Header is 2 regs, g0 and g1 are the contents. g0 will be implied
261     * move, here's g1.
262     */
263    if (inst->header_size != 0) {
264       brw_push_insn_state(p);
265       brw_set_default_mask_control(p, BRW_MASK_DISABLE);
266       brw_set_default_predicate_control(p, BRW_PREDICATE_NONE);
267       brw_set_default_compression_control(p, BRW_COMPRESSION_NONE);
268       brw_set_default_flag_reg(p, 0, 0);
269 
270       /* On HSW, the GPU will use the predicate on SENDC, unless the header is
271        * present.
272        */
273       if (prog_data->uses_kill) {
274          struct brw_reg pixel_mask;
275 
276          if (devinfo->gen >= 6)
277             pixel_mask = retype(brw_vec1_grf(1, 7), BRW_REGISTER_TYPE_UW);
278          else
279             pixel_mask = retype(brw_vec1_grf(0, 0), BRW_REGISTER_TYPE_UW);
280 
281          brw_MOV(p, pixel_mask, brw_flag_reg(0, 1));
282       }
283 
284       if (devinfo->gen >= 6) {
285          brw_push_insn_state(p);
286          brw_set_default_exec_size(p, BRW_EXECUTE_16);
287 	 brw_set_default_compression_control(p, BRW_COMPRESSION_COMPRESSED);
288 	 brw_MOV(p,
289 		 retype(payload, BRW_REGISTER_TYPE_UD),
290 		 retype(brw_vec8_grf(0, 0), BRW_REGISTER_TYPE_UD));
291          brw_pop_insn_state(p);
292 
293          if (inst->target > 0 && key->replicate_alpha) {
294             /* Set "Source0 Alpha Present to RenderTarget" bit in message
295              * header.
296              */
297             brw_OR(p,
298 		   vec1(retype(payload, BRW_REGISTER_TYPE_UD)),
299 		   vec1(retype(brw_vec8_grf(0, 0), BRW_REGISTER_TYPE_UD)),
300 		   brw_imm_ud(0x1 << 11));
301          }
302 
303 	 if (inst->target > 0) {
304 	    /* Set the render target index for choosing BLEND_STATE. */
305 	    brw_MOV(p, retype(vec1(suboffset(payload, 2)),
306                               BRW_REGISTER_TYPE_UD),
307 		    brw_imm_ud(inst->target));
308 	 }
309 
310          /* Set computes stencil to render target */
311          if (prog_data->computed_stencil) {
312             brw_OR(p,
313                    vec1(retype(payload, BRW_REGISTER_TYPE_UD)),
314                    vec1(retype(brw_vec8_grf(0, 0), BRW_REGISTER_TYPE_UD)),
315                    brw_imm_ud(0x1 << 14));
316          }
317 
318 	 implied_header = brw_null_reg();
319       } else {
320 	 implied_header = retype(brw_vec8_grf(0, 0), BRW_REGISTER_TYPE_UW);
321       }
322 
323       brw_pop_insn_state(p);
324    } else {
325       implied_header = brw_null_reg();
326    }
327 
328    if (!runtime_check_aads_emit) {
329       fire_fb_write(inst, payload, implied_header, inst->mlen);
330    } else {
331       /* This can only happen in gen < 6 */
332       assert(devinfo->gen < 6);
333 
334       struct brw_reg v1_null_ud = vec1(retype(brw_null_reg(), BRW_REGISTER_TYPE_UD));
335 
336       /* Check runtime bit to detect if we have to send AA data or not */
337       brw_set_default_compression_control(p, BRW_COMPRESSION_NONE);
338       brw_AND(p,
339               v1_null_ud,
340               retype(brw_vec1_grf(1, 6), BRW_REGISTER_TYPE_UD),
341               brw_imm_ud(1<<26));
342       brw_inst_set_cond_modifier(p->devinfo, brw_last_inst, BRW_CONDITIONAL_NZ);
343 
344       int jmp = brw_JMPI(p, brw_imm_ud(0), BRW_PREDICATE_NORMAL) - p->store;
345       brw_inst_set_exec_size(p->devinfo, brw_last_inst, BRW_EXECUTE_1);
346       {
347          /* Don't send AA data */
348          fire_fb_write(inst, offset(payload, 1), implied_header, inst->mlen-1);
349       }
350       brw_land_fwd_jump(p, jmp);
351       fire_fb_write(inst, payload, implied_header, inst->mlen);
352    }
353 }
354 
355 void
generate_fb_read(fs_inst * inst,struct brw_reg dst,struct brw_reg payload)356 fs_generator::generate_fb_read(fs_inst *inst, struct brw_reg dst,
357                                struct brw_reg payload)
358 {
359    assert(inst->size_written % REG_SIZE == 0);
360    struct brw_wm_prog_data *prog_data = brw_wm_prog_data(this->prog_data);
361    const unsigned surf_index =
362       prog_data->binding_table.render_target_start + inst->target;
363 
364    gen9_fb_READ(p, dst, payload, surf_index,
365                 inst->header_size, inst->size_written / REG_SIZE,
366                 prog_data->persample_dispatch);
367 
368    brw_mark_surface_used(&prog_data->base, surf_index);
369 }
370 
371 void
generate_mov_indirect(fs_inst * inst,struct brw_reg dst,struct brw_reg reg,struct brw_reg indirect_byte_offset)372 fs_generator::generate_mov_indirect(fs_inst *inst,
373                                     struct brw_reg dst,
374                                     struct brw_reg reg,
375                                     struct brw_reg indirect_byte_offset)
376 {
377    assert(indirect_byte_offset.type == BRW_REGISTER_TYPE_UD);
378    assert(indirect_byte_offset.file == BRW_GENERAL_REGISTER_FILE);
379 
380    unsigned imm_byte_offset = reg.nr * REG_SIZE + reg.subnr;
381 
382    if (indirect_byte_offset.file == BRW_IMMEDIATE_VALUE) {
383       imm_byte_offset += indirect_byte_offset.ud;
384 
385       reg.nr = imm_byte_offset / REG_SIZE;
386       reg.subnr = imm_byte_offset % REG_SIZE;
387       brw_MOV(p, dst, reg);
388    } else {
389       /* Prior to Broadwell, there are only 8 address registers. */
390       assert(inst->exec_size == 8 || devinfo->gen >= 8);
391 
392       /* We use VxH indirect addressing, clobbering a0.0 through a0.7. */
393       struct brw_reg addr = vec8(brw_address_reg(0));
394 
395       /* The destination stride of an instruction (in bytes) must be greater
396        * than or equal to the size of the rest of the instruction.  Since the
397        * address register is of type UW, we can't use a D-type instruction.
398        * In order to get around this, re retype to UW and use a stride.
399        */
400       indirect_byte_offset =
401          retype(spread(indirect_byte_offset, 2), BRW_REGISTER_TYPE_UW);
402 
403       /* There are a number of reasons why we don't use the base offset here.
404        * One reason is that the field is only 9 bits which means we can only
405        * use it to access the first 16 GRFs.  Also, from the Haswell PRM
406        * section "Register Region Restrictions":
407        *
408        *    "The lower bits of the AddressImmediate must not overflow to
409        *    change the register address.  The lower 5 bits of Address
410        *    Immediate when added to lower 5 bits of address register gives
411        *    the sub-register offset. The upper bits of Address Immediate
412        *    when added to upper bits of address register gives the register
413        *    address. Any overflow from sub-register offset is dropped."
414        *
415        * Since the indirect may cause us to cross a register boundary, this
416        * makes the base offset almost useless.  We could try and do something
417        * clever where we use a actual base offset if base_offset % 32 == 0 but
418        * that would mean we were generating different code depending on the
419        * base offset.  Instead, for the sake of consistency, we'll just do the
420        * add ourselves.  This restriction is only listed in the Haswell PRM
421        * but empirical testing indicates that it applies on all older
422        * generations and is lifted on Broadwell.
423        *
424        * In the end, while base_offset is nice to look at in the generated
425        * code, using it saves us 0 instructions and would require quite a bit
426        * of case-by-case work.  It's just not worth it.
427        */
428       brw_ADD(p, addr, indirect_byte_offset, brw_imm_uw(imm_byte_offset));
429       struct brw_reg ind_src = brw_VxH_indirect(0, 0);
430 
431       brw_inst *mov = brw_MOV(p, dst, retype(ind_src, reg.type));
432 
433       if (devinfo->gen == 6 && dst.file == BRW_MESSAGE_REGISTER_FILE &&
434           !inst->get_next()->is_tail_sentinel() &&
435           ((fs_inst *)inst->get_next())->mlen > 0) {
436          /* From the Sandybridge PRM:
437           *
438           *    "[Errata: DevSNB(SNB)] If MRF register is updated by any
439           *    instruction that “indexed/indirect” source AND is followed by a
440           *    send, the instruction requires a “Switch”. This is to avoid
441           *    race condition where send may dispatch before MRF is updated."
442           */
443          brw_inst_set_thread_control(devinfo, mov, BRW_THREAD_SWITCH);
444       }
445    }
446 }
447 
448 void
generate_urb_read(fs_inst * inst,struct brw_reg dst,struct brw_reg header)449 fs_generator::generate_urb_read(fs_inst *inst,
450                                 struct brw_reg dst,
451                                 struct brw_reg header)
452 {
453    assert(inst->size_written % REG_SIZE == 0);
454    assert(header.file == BRW_GENERAL_REGISTER_FILE);
455    assert(header.type == BRW_REGISTER_TYPE_UD);
456 
457    brw_inst *send = brw_next_insn(p, BRW_OPCODE_SEND);
458    brw_set_dest(p, send, retype(dst, BRW_REGISTER_TYPE_UD));
459    brw_set_src0(p, send, header);
460    brw_set_src1(p, send, brw_imm_ud(0u));
461 
462    brw_inst_set_sfid(p->devinfo, send, BRW_SFID_URB);
463    brw_inst_set_urb_opcode(p->devinfo, send, GEN8_URB_OPCODE_SIMD8_READ);
464 
465    if (inst->opcode == SHADER_OPCODE_URB_READ_SIMD8_PER_SLOT)
466       brw_inst_set_urb_per_slot_offset(p->devinfo, send, true);
467 
468    brw_inst_set_mlen(p->devinfo, send, inst->mlen);
469    brw_inst_set_rlen(p->devinfo, send, inst->size_written / REG_SIZE);
470    brw_inst_set_header_present(p->devinfo, send, true);
471    brw_inst_set_urb_global_offset(p->devinfo, send, inst->offset);
472 }
473 
474 void
generate_urb_write(fs_inst * inst,struct brw_reg payload)475 fs_generator::generate_urb_write(fs_inst *inst, struct brw_reg payload)
476 {
477    brw_inst *insn;
478 
479    insn = brw_next_insn(p, BRW_OPCODE_SEND);
480 
481    brw_set_dest(p, insn, brw_null_reg());
482    brw_set_src0(p, insn, payload);
483    brw_set_src1(p, insn, brw_imm_d(0));
484 
485    brw_inst_set_sfid(p->devinfo, insn, BRW_SFID_URB);
486    brw_inst_set_urb_opcode(p->devinfo, insn, GEN8_URB_OPCODE_SIMD8_WRITE);
487 
488    if (inst->opcode == SHADER_OPCODE_URB_WRITE_SIMD8_PER_SLOT ||
489        inst->opcode == SHADER_OPCODE_URB_WRITE_SIMD8_MASKED_PER_SLOT)
490       brw_inst_set_urb_per_slot_offset(p->devinfo, insn, true);
491 
492    if (inst->opcode == SHADER_OPCODE_URB_WRITE_SIMD8_MASKED ||
493        inst->opcode == SHADER_OPCODE_URB_WRITE_SIMD8_MASKED_PER_SLOT)
494       brw_inst_set_urb_channel_mask_present(p->devinfo, insn, true);
495 
496    brw_inst_set_mlen(p->devinfo, insn, inst->mlen);
497    brw_inst_set_rlen(p->devinfo, insn, 0);
498    brw_inst_set_eot(p->devinfo, insn, inst->eot);
499    brw_inst_set_header_present(p->devinfo, insn, true);
500    brw_inst_set_urb_global_offset(p->devinfo, insn, inst->offset);
501 }
502 
503 void
generate_cs_terminate(fs_inst * inst,struct brw_reg payload)504 fs_generator::generate_cs_terminate(fs_inst *inst, struct brw_reg payload)
505 {
506    struct brw_inst *insn;
507 
508    insn = brw_next_insn(p, BRW_OPCODE_SEND);
509 
510    brw_set_dest(p, insn, retype(brw_null_reg(), BRW_REGISTER_TYPE_UW));
511    brw_set_src0(p, insn, retype(payload, BRW_REGISTER_TYPE_UW));
512    brw_set_src1(p, insn, brw_imm_d(0));
513 
514    /* Terminate a compute shader by sending a message to the thread spawner.
515     */
516    brw_inst_set_sfid(devinfo, insn, BRW_SFID_THREAD_SPAWNER);
517    brw_inst_set_mlen(devinfo, insn, 1);
518    brw_inst_set_rlen(devinfo, insn, 0);
519    brw_inst_set_eot(devinfo, insn, inst->eot);
520    brw_inst_set_header_present(devinfo, insn, false);
521 
522    brw_inst_set_ts_opcode(devinfo, insn, 0); /* Dereference resource */
523    brw_inst_set_ts_request_type(devinfo, insn, 0); /* Root thread */
524 
525    /* Note that even though the thread has a URB resource associated with it,
526     * we set the "do not dereference URB" bit, because the URB resource is
527     * managed by the fixed-function unit, so it will free it automatically.
528     */
529    brw_inst_set_ts_resource_select(devinfo, insn, 1); /* Do not dereference URB */
530 
531    brw_inst_set_mask_control(devinfo, insn, BRW_MASK_DISABLE);
532 }
533 
534 void
generate_barrier(fs_inst * inst,struct brw_reg src)535 fs_generator::generate_barrier(fs_inst *inst, struct brw_reg src)
536 {
537    brw_barrier(p, src);
538    brw_WAIT(p);
539 }
540 
541 void
generate_linterp(fs_inst * inst,struct brw_reg dst,struct brw_reg * src)542 fs_generator::generate_linterp(fs_inst *inst,
543 			     struct brw_reg dst, struct brw_reg *src)
544 {
545    /* PLN reads:
546     *                      /   in SIMD16   \
547     *    -----------------------------------
548     *   | src1+0 | src1+1 | src1+2 | src1+3 |
549     *   |-----------------------------------|
550     *   |(x0, x1)|(y0, y1)|(x2, x3)|(y2, y3)|
551     *    -----------------------------------
552     *
553     * but for the LINE/MAC pair, the LINE reads Xs and the MAC reads Ys:
554     *
555     *    -----------------------------------
556     *   | src1+0 | src1+1 | src1+2 | src1+3 |
557     *   |-----------------------------------|
558     *   |(x0, x1)|(y0, y1)|        |        | in SIMD8
559     *   |-----------------------------------|
560     *   |(x0, x1)|(x2, x3)|(y0, y1)|(y2, y3)| in SIMD16
561     *    -----------------------------------
562     *
563     * See also: emit_interpolation_setup_gen4().
564     */
565    struct brw_reg delta_x = src[0];
566    struct brw_reg delta_y = offset(src[0], inst->exec_size / 8);
567    struct brw_reg interp = src[1];
568 
569    if (devinfo->has_pln &&
570        (devinfo->gen >= 7 || (delta_x.nr & 1) == 0)) {
571       brw_PLN(p, dst, interp, delta_x);
572    } else {
573       brw_LINE(p, brw_null_reg(), interp, delta_x);
574       brw_MAC(p, dst, suboffset(interp, 1), delta_y);
575    }
576 }
577 
578 void
generate_get_buffer_size(fs_inst * inst,struct brw_reg dst,struct brw_reg src,struct brw_reg surf_index)579 fs_generator::generate_get_buffer_size(fs_inst *inst,
580                                        struct brw_reg dst,
581                                        struct brw_reg src,
582                                        struct brw_reg surf_index)
583 {
584    assert(devinfo->gen >= 7);
585    assert(surf_index.file == BRW_IMMEDIATE_VALUE);
586 
587    uint32_t simd_mode;
588    int rlen = 4;
589 
590    switch (inst->exec_size) {
591    case 8:
592       simd_mode = BRW_SAMPLER_SIMD_MODE_SIMD8;
593       break;
594    case 16:
595       simd_mode = BRW_SAMPLER_SIMD_MODE_SIMD16;
596       break;
597    default:
598       unreachable("Invalid width for texture instruction");
599    }
600 
601    if (simd_mode == BRW_SAMPLER_SIMD_MODE_SIMD16) {
602       rlen = 8;
603       dst = vec16(dst);
604    }
605 
606    brw_SAMPLE(p,
607               retype(dst, BRW_REGISTER_TYPE_UW),
608               inst->base_mrf,
609               src,
610               surf_index.ud,
611               0,
612               GEN5_SAMPLER_MESSAGE_SAMPLE_RESINFO,
613               rlen, /* response length */
614               inst->mlen,
615               inst->header_size > 0,
616               simd_mode,
617               BRW_SAMPLER_RETURN_FORMAT_SINT32);
618 
619    brw_mark_surface_used(prog_data, surf_index.ud);
620 }
621 
622 void
generate_tex(fs_inst * inst,struct brw_reg dst,struct brw_reg src,struct brw_reg surface_index,struct brw_reg sampler_index)623 fs_generator::generate_tex(fs_inst *inst, struct brw_reg dst, struct brw_reg src,
624                            struct brw_reg surface_index,
625                            struct brw_reg sampler_index)
626 {
627    assert(inst->size_written % REG_SIZE == 0);
628    int msg_type = -1;
629    uint32_t simd_mode;
630    uint32_t return_format;
631    bool is_combined_send = inst->eot;
632 
633    switch (dst.type) {
634    case BRW_REGISTER_TYPE_D:
635       return_format = BRW_SAMPLER_RETURN_FORMAT_SINT32;
636       break;
637    case BRW_REGISTER_TYPE_UD:
638       return_format = BRW_SAMPLER_RETURN_FORMAT_UINT32;
639       break;
640    default:
641       return_format = BRW_SAMPLER_RETURN_FORMAT_FLOAT32;
642       break;
643    }
644 
645    /* Stomp the resinfo output type to UINT32.  On gens 4-5, the output type
646     * is set as part of the message descriptor.  On gen4, the PRM seems to
647     * allow UINT32 and FLOAT32 (i965 PRM, Vol. 4 Section 4.8.1.1), but on
648     * later gens UINT32 is required.  Once you hit Sandy Bridge, the bit is
649     * gone from the message descriptor entirely and you just get UINT32 all
650     * the time regasrdless.  Since we can really only do non-UINT32 on gen4,
651     * just stomp it to UINT32 all the time.
652     */
653    if (inst->opcode == SHADER_OPCODE_TXS)
654       return_format = BRW_SAMPLER_RETURN_FORMAT_UINT32;
655 
656    switch (inst->exec_size) {
657    case 8:
658       simd_mode = BRW_SAMPLER_SIMD_MODE_SIMD8;
659       break;
660    case 16:
661       simd_mode = BRW_SAMPLER_SIMD_MODE_SIMD16;
662       break;
663    default:
664       unreachable("Invalid width for texture instruction");
665    }
666 
667    if (devinfo->gen >= 5) {
668       switch (inst->opcode) {
669       case SHADER_OPCODE_TEX:
670 	 if (inst->shadow_compare) {
671 	    msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE_COMPARE;
672 	 } else {
673 	    msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE;
674 	 }
675 	 break;
676       case FS_OPCODE_TXB:
677 	 if (inst->shadow_compare) {
678 	    msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE_BIAS_COMPARE;
679 	 } else {
680 	    msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE_BIAS;
681 	 }
682 	 break;
683       case SHADER_OPCODE_TXL:
684 	 if (inst->shadow_compare) {
685 	    msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE_LOD_COMPARE;
686 	 } else {
687 	    msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE_LOD;
688 	 }
689 	 break;
690       case SHADER_OPCODE_TXL_LZ:
691          assert(devinfo->gen >= 9);
692 	 if (inst->shadow_compare) {
693             msg_type = GEN9_SAMPLER_MESSAGE_SAMPLE_C_LZ;
694          } else {
695             msg_type = GEN9_SAMPLER_MESSAGE_SAMPLE_LZ;
696          }
697          break;
698       case SHADER_OPCODE_TXS:
699 	 msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE_RESINFO;
700 	 break;
701       case SHADER_OPCODE_TXD:
702          if (inst->shadow_compare) {
703             /* Gen7.5+.  Otherwise, lowered in NIR */
704             assert(devinfo->gen >= 8 || devinfo->is_haswell);
705             msg_type = HSW_SAMPLER_MESSAGE_SAMPLE_DERIV_COMPARE;
706          } else {
707             msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE_DERIVS;
708          }
709 	 break;
710       case SHADER_OPCODE_TXF:
711 	 msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE_LD;
712 	 break;
713       case SHADER_OPCODE_TXF_LZ:
714          assert(devinfo->gen >= 9);
715          msg_type = GEN9_SAMPLER_MESSAGE_SAMPLE_LD_LZ;
716          break;
717       case SHADER_OPCODE_TXF_CMS_W:
718          assert(devinfo->gen >= 9);
719          msg_type = GEN9_SAMPLER_MESSAGE_SAMPLE_LD2DMS_W;
720          break;
721       case SHADER_OPCODE_TXF_CMS:
722          if (devinfo->gen >= 7)
723             msg_type = GEN7_SAMPLER_MESSAGE_SAMPLE_LD2DMS;
724          else
725             msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE_LD;
726          break;
727       case SHADER_OPCODE_TXF_UMS:
728          assert(devinfo->gen >= 7);
729          msg_type = GEN7_SAMPLER_MESSAGE_SAMPLE_LD2DSS;
730          break;
731       case SHADER_OPCODE_TXF_MCS:
732          assert(devinfo->gen >= 7);
733          msg_type = GEN7_SAMPLER_MESSAGE_SAMPLE_LD_MCS;
734          break;
735       case SHADER_OPCODE_LOD:
736          msg_type = GEN5_SAMPLER_MESSAGE_LOD;
737          break;
738       case SHADER_OPCODE_TG4:
739          if (inst->shadow_compare) {
740             assert(devinfo->gen >= 7);
741             msg_type = GEN7_SAMPLER_MESSAGE_SAMPLE_GATHER4_C;
742          } else {
743             assert(devinfo->gen >= 6);
744             msg_type = GEN7_SAMPLER_MESSAGE_SAMPLE_GATHER4;
745          }
746          break;
747       case SHADER_OPCODE_TG4_OFFSET:
748          assert(devinfo->gen >= 7);
749          if (inst->shadow_compare) {
750             msg_type = GEN7_SAMPLER_MESSAGE_SAMPLE_GATHER4_PO_C;
751          } else {
752             msg_type = GEN7_SAMPLER_MESSAGE_SAMPLE_GATHER4_PO;
753          }
754          break;
755       case SHADER_OPCODE_SAMPLEINFO:
756          msg_type = GEN6_SAMPLER_MESSAGE_SAMPLE_SAMPLEINFO;
757          break;
758       default:
759 	 unreachable("not reached");
760       }
761    } else {
762       switch (inst->opcode) {
763       case SHADER_OPCODE_TEX:
764 	 /* Note that G45 and older determines shadow compare and dispatch width
765 	  * from message length for most messages.
766 	  */
767          if (inst->exec_size == 8) {
768             msg_type = BRW_SAMPLER_MESSAGE_SIMD8_SAMPLE;
769             if (inst->shadow_compare) {
770                assert(inst->mlen == 6);
771             } else {
772                assert(inst->mlen <= 4);
773             }
774          } else {
775             if (inst->shadow_compare) {
776                msg_type = BRW_SAMPLER_MESSAGE_SIMD16_SAMPLE_COMPARE;
777                assert(inst->mlen == 9);
778             } else {
779                msg_type = BRW_SAMPLER_MESSAGE_SIMD16_SAMPLE;
780                assert(inst->mlen <= 7 && inst->mlen % 2 == 1);
781             }
782          }
783 	 break;
784       case FS_OPCODE_TXB:
785 	 if (inst->shadow_compare) {
786             assert(inst->exec_size == 8);
787 	    assert(inst->mlen == 6);
788 	    msg_type = BRW_SAMPLER_MESSAGE_SIMD8_SAMPLE_BIAS_COMPARE;
789 	 } else {
790 	    assert(inst->mlen == 9);
791 	    msg_type = BRW_SAMPLER_MESSAGE_SIMD16_SAMPLE_BIAS;
792 	    simd_mode = BRW_SAMPLER_SIMD_MODE_SIMD16;
793 	 }
794 	 break;
795       case SHADER_OPCODE_TXL:
796 	 if (inst->shadow_compare) {
797             assert(inst->exec_size == 8);
798 	    assert(inst->mlen == 6);
799 	    msg_type = BRW_SAMPLER_MESSAGE_SIMD8_SAMPLE_LOD_COMPARE;
800 	 } else {
801 	    assert(inst->mlen == 9);
802 	    msg_type = BRW_SAMPLER_MESSAGE_SIMD16_SAMPLE_LOD;
803 	    simd_mode = BRW_SAMPLER_SIMD_MODE_SIMD16;
804 	 }
805 	 break;
806       case SHADER_OPCODE_TXD:
807 	 /* There is no sample_d_c message; comparisons are done manually */
808          assert(inst->exec_size == 8);
809 	 assert(inst->mlen == 7 || inst->mlen == 10);
810 	 msg_type = BRW_SAMPLER_MESSAGE_SIMD8_SAMPLE_GRADIENTS;
811 	 break;
812       case SHADER_OPCODE_TXF:
813          assert(inst->mlen <= 9 && inst->mlen % 2 == 1);
814 	 msg_type = BRW_SAMPLER_MESSAGE_SIMD16_LD;
815 	 simd_mode = BRW_SAMPLER_SIMD_MODE_SIMD16;
816 	 break;
817       case SHADER_OPCODE_TXS:
818 	 assert(inst->mlen == 3);
819 	 msg_type = BRW_SAMPLER_MESSAGE_SIMD16_RESINFO;
820 	 simd_mode = BRW_SAMPLER_SIMD_MODE_SIMD16;
821 	 break;
822       default:
823 	 unreachable("not reached");
824       }
825    }
826    assert(msg_type != -1);
827 
828    if (simd_mode == BRW_SAMPLER_SIMD_MODE_SIMD16) {
829       dst = vec16(dst);
830    }
831 
832    assert(devinfo->gen < 7 || inst->header_size == 0 ||
833           src.file == BRW_GENERAL_REGISTER_FILE);
834 
835    assert(sampler_index.type == BRW_REGISTER_TYPE_UD);
836 
837    /* Load the message header if present.  If there's a texture offset,
838     * we need to set it up explicitly and load the offset bitfield.
839     * Otherwise, we can use an implied move from g0 to the first message reg.
840     */
841    if (inst->header_size != 0) {
842       if (devinfo->gen < 6 && !inst->offset) {
843          /* Set up an implied move from g0 to the MRF. */
844          src = retype(brw_vec8_grf(0, 0), BRW_REGISTER_TYPE_UW);
845       } else {
846          struct brw_reg header_reg;
847 
848          if (devinfo->gen >= 7) {
849             header_reg = src;
850          } else {
851             assert(inst->base_mrf != -1);
852             header_reg = brw_message_reg(inst->base_mrf);
853          }
854 
855          brw_push_insn_state(p);
856          brw_set_default_exec_size(p, BRW_EXECUTE_8);
857          brw_set_default_mask_control(p, BRW_MASK_DISABLE);
858          brw_set_default_compression_control(p, BRW_COMPRESSION_NONE);
859          /* Explicitly set up the message header by copying g0 to the MRF. */
860          brw_MOV(p, header_reg, brw_vec8_grf(0, 0));
861 
862          if (inst->offset) {
863             /* Set the offset bits in DWord 2. */
864             brw_MOV(p, get_element_ud(header_reg, 2),
865                        brw_imm_ud(inst->offset));
866          } else if (stage != MESA_SHADER_VERTEX &&
867                     stage != MESA_SHADER_FRAGMENT) {
868             /* The vertex and fragment stages have g0.2 set to 0, so
869              * header0.2 is 0 when g0 is copied. Other stages may not, so we
870              * must set it to 0 to avoid setting undesirable bits in the
871              * message.
872              */
873             brw_MOV(p, get_element_ud(header_reg, 2), brw_imm_ud(0));
874          }
875 
876          brw_adjust_sampler_state_pointer(p, header_reg, sampler_index);
877          brw_pop_insn_state(p);
878       }
879    }
880 
881    uint32_t base_binding_table_index = (inst->opcode == SHADER_OPCODE_TG4 ||
882          inst->opcode == SHADER_OPCODE_TG4_OFFSET)
883          ? prog_data->binding_table.gather_texture_start
884          : prog_data->binding_table.texture_start;
885 
886    if (surface_index.file == BRW_IMMEDIATE_VALUE &&
887        sampler_index.file == BRW_IMMEDIATE_VALUE) {
888       uint32_t surface = surface_index.ud;
889       uint32_t sampler = sampler_index.ud;
890 
891       brw_SAMPLE(p,
892                  retype(dst, BRW_REGISTER_TYPE_UW),
893                  inst->base_mrf,
894                  src,
895                  surface + base_binding_table_index,
896                  sampler % 16,
897                  msg_type,
898                  inst->size_written / REG_SIZE,
899                  inst->mlen,
900                  inst->header_size != 0,
901                  simd_mode,
902                  return_format);
903 
904       brw_mark_surface_used(prog_data, surface + base_binding_table_index);
905    } else {
906       /* Non-const sampler index */
907 
908       struct brw_reg addr = vec1(retype(brw_address_reg(0), BRW_REGISTER_TYPE_UD));
909       struct brw_reg surface_reg = vec1(retype(surface_index, BRW_REGISTER_TYPE_UD));
910       struct brw_reg sampler_reg = vec1(retype(sampler_index, BRW_REGISTER_TYPE_UD));
911 
912       brw_push_insn_state(p);
913       brw_set_default_mask_control(p, BRW_MASK_DISABLE);
914       brw_set_default_access_mode(p, BRW_ALIGN_1);
915 
916       if (brw_regs_equal(&surface_reg, &sampler_reg)) {
917          brw_MUL(p, addr, sampler_reg, brw_imm_uw(0x101));
918       } else {
919          if (sampler_reg.file == BRW_IMMEDIATE_VALUE) {
920             brw_OR(p, addr, surface_reg, brw_imm_ud(sampler_reg.ud << 8));
921          } else {
922             brw_SHL(p, addr, sampler_reg, brw_imm_ud(8));
923             brw_OR(p, addr, addr, surface_reg);
924          }
925       }
926       if (base_binding_table_index)
927          brw_ADD(p, addr, addr, brw_imm_ud(base_binding_table_index));
928       brw_AND(p, addr, addr, brw_imm_ud(0xfff));
929 
930       brw_pop_insn_state(p);
931 
932       /* dst = send(offset, a0.0 | <descriptor>) */
933       brw_inst *insn = brw_send_indirect_message(
934          p, BRW_SFID_SAMPLER, dst, src, addr);
935       brw_set_sampler_message(p, insn,
936                               0 /* surface */,
937                               0 /* sampler */,
938                               msg_type,
939                               inst->size_written / REG_SIZE,
940                               inst->mlen /* mlen */,
941                               inst->header_size != 0 /* header */,
942                               simd_mode,
943                               return_format);
944 
945       /* visitor knows more than we do about the surface limit required,
946        * so has already done marking.
947        */
948    }
949 
950    if (is_combined_send) {
951       brw_inst_set_eot(p->devinfo, brw_last_inst, true);
952       brw_inst_set_opcode(p->devinfo, brw_last_inst, BRW_OPCODE_SENDC);
953    }
954 }
955 
956 
957 /* For OPCODE_DDX and OPCODE_DDY, per channel of output we've got input
958  * looking like:
959  *
960  * arg0: ss0.tl ss0.tr ss0.bl ss0.br ss1.tl ss1.tr ss1.bl ss1.br
961  *
962  * Ideally, we want to produce:
963  *
964  *           DDX                     DDY
965  * dst: (ss0.tr - ss0.tl)     (ss0.tl - ss0.bl)
966  *      (ss0.tr - ss0.tl)     (ss0.tr - ss0.br)
967  *      (ss0.br - ss0.bl)     (ss0.tl - ss0.bl)
968  *      (ss0.br - ss0.bl)     (ss0.tr - ss0.br)
969  *      (ss1.tr - ss1.tl)     (ss1.tl - ss1.bl)
970  *      (ss1.tr - ss1.tl)     (ss1.tr - ss1.br)
971  *      (ss1.br - ss1.bl)     (ss1.tl - ss1.bl)
972  *      (ss1.br - ss1.bl)     (ss1.tr - ss1.br)
973  *
974  * and add another set of two more subspans if in 16-pixel dispatch mode.
975  *
976  * For DDX, it ends up being easy: width = 2, horiz=0 gets us the same result
977  * for each pair, and vertstride = 2 jumps us 2 elements after processing a
978  * pair.  But the ideal approximation may impose a huge performance cost on
979  * sample_d.  On at least Haswell, sample_d instruction does some
980  * optimizations if the same LOD is used for all pixels in the subspan.
981  *
982  * For DDY, we need to use ALIGN16 mode since it's capable of doing the
983  * appropriate swizzling.
984  */
985 void
generate_ddx(enum opcode opcode,struct brw_reg dst,struct brw_reg src)986 fs_generator::generate_ddx(enum opcode opcode,
987                            struct brw_reg dst, struct brw_reg src)
988 {
989    unsigned vstride, width;
990 
991    if (opcode == FS_OPCODE_DDX_FINE) {
992       /* produce accurate derivatives */
993       vstride = BRW_VERTICAL_STRIDE_2;
994       width = BRW_WIDTH_2;
995    } else {
996       /* replicate the derivative at the top-left pixel to other pixels */
997       vstride = BRW_VERTICAL_STRIDE_4;
998       width = BRW_WIDTH_4;
999    }
1000 
1001    struct brw_reg src0 = brw_reg(src.file, src.nr, 1,
1002                                  src.negate, src.abs,
1003 				 BRW_REGISTER_TYPE_F,
1004 				 vstride,
1005 				 width,
1006 				 BRW_HORIZONTAL_STRIDE_0,
1007 				 BRW_SWIZZLE_XYZW, WRITEMASK_XYZW);
1008    struct brw_reg src1 = brw_reg(src.file, src.nr, 0,
1009                                  src.negate, src.abs,
1010 				 BRW_REGISTER_TYPE_F,
1011 				 vstride,
1012 				 width,
1013 				 BRW_HORIZONTAL_STRIDE_0,
1014 				 BRW_SWIZZLE_XYZW, WRITEMASK_XYZW);
1015    brw_ADD(p, dst, src0, negate(src1));
1016 }
1017 
1018 /* The negate_value boolean is used to negate the derivative computation for
1019  * FBOs, since they place the origin at the upper left instead of the lower
1020  * left.
1021  */
1022 void
generate_ddy(enum opcode opcode,struct brw_reg dst,struct brw_reg src)1023 fs_generator::generate_ddy(enum opcode opcode,
1024                            struct brw_reg dst, struct brw_reg src)
1025 {
1026    if (opcode == FS_OPCODE_DDY_FINE) {
1027       /* produce accurate derivatives */
1028       struct brw_reg src0 = brw_reg(src.file, src.nr, 0,
1029                                     src.negate, src.abs,
1030                                     BRW_REGISTER_TYPE_F,
1031                                     BRW_VERTICAL_STRIDE_4,
1032                                     BRW_WIDTH_4,
1033                                     BRW_HORIZONTAL_STRIDE_1,
1034                                     BRW_SWIZZLE_XYXY, WRITEMASK_XYZW);
1035       struct brw_reg src1 = brw_reg(src.file, src.nr, 0,
1036                                     src.negate, src.abs,
1037                                     BRW_REGISTER_TYPE_F,
1038                                     BRW_VERTICAL_STRIDE_4,
1039                                     BRW_WIDTH_4,
1040                                     BRW_HORIZONTAL_STRIDE_1,
1041                                     BRW_SWIZZLE_ZWZW, WRITEMASK_XYZW);
1042       brw_push_insn_state(p);
1043       brw_set_default_access_mode(p, BRW_ALIGN_16);
1044       brw_ADD(p, dst, negate(src0), src1);
1045       brw_pop_insn_state(p);
1046    } else {
1047       /* replicate the derivative at the top-left pixel to other pixels */
1048       struct brw_reg src0 = brw_reg(src.file, src.nr, 0,
1049                                     src.negate, src.abs,
1050                                     BRW_REGISTER_TYPE_F,
1051                                     BRW_VERTICAL_STRIDE_4,
1052                                     BRW_WIDTH_4,
1053                                     BRW_HORIZONTAL_STRIDE_0,
1054                                     BRW_SWIZZLE_XYZW, WRITEMASK_XYZW);
1055       struct brw_reg src1 = brw_reg(src.file, src.nr, 2,
1056                                     src.negate, src.abs,
1057                                     BRW_REGISTER_TYPE_F,
1058                                     BRW_VERTICAL_STRIDE_4,
1059                                     BRW_WIDTH_4,
1060                                     BRW_HORIZONTAL_STRIDE_0,
1061                                     BRW_SWIZZLE_XYZW, WRITEMASK_XYZW);
1062       brw_ADD(p, dst, negate(src0), src1);
1063    }
1064 }
1065 
1066 void
generate_discard_jump(fs_inst * inst)1067 fs_generator::generate_discard_jump(fs_inst *inst)
1068 {
1069    assert(devinfo->gen >= 6);
1070 
1071    /* This HALT will be patched up at FB write time to point UIP at the end of
1072     * the program, and at brw_uip_jip() JIP will be set to the end of the
1073     * current block (or the program).
1074     */
1075    this->discard_halt_patches.push_tail(new(mem_ctx) ip_record(p->nr_insn));
1076    gen6_HALT(p);
1077 }
1078 
1079 void
generate_scratch_write(fs_inst * inst,struct brw_reg src)1080 fs_generator::generate_scratch_write(fs_inst *inst, struct brw_reg src)
1081 {
1082    /* The 32-wide messages only respect the first 16-wide half of the channel
1083     * enable signals which are replicated identically for the second group of
1084     * 16 channels, so we cannot use them unless the write is marked
1085     * force_writemask_all.
1086     */
1087    const unsigned lower_size = inst->force_writemask_all ? inst->exec_size :
1088                                MIN2(16, inst->exec_size);
1089    const unsigned block_size = 4 * lower_size / REG_SIZE;
1090    assert(inst->mlen != 0);
1091 
1092    brw_push_insn_state(p);
1093    brw_set_default_exec_size(p, cvt(lower_size) - 1);
1094    brw_set_default_compression(p, lower_size > 8);
1095 
1096    for (unsigned i = 0; i < inst->exec_size / lower_size; i++) {
1097       brw_set_default_group(p, inst->group + lower_size * i);
1098 
1099       brw_MOV(p, brw_uvec_mrf(lower_size, inst->base_mrf + 1, 0),
1100               retype(offset(src, block_size * i), BRW_REGISTER_TYPE_UD));
1101 
1102       brw_oword_block_write_scratch(p, brw_message_reg(inst->base_mrf),
1103                                     block_size,
1104                                     inst->offset + block_size * REG_SIZE * i);
1105    }
1106 
1107    brw_pop_insn_state(p);
1108 }
1109 
1110 void
generate_scratch_read(fs_inst * inst,struct brw_reg dst)1111 fs_generator::generate_scratch_read(fs_inst *inst, struct brw_reg dst)
1112 {
1113    assert(inst->exec_size <= 16 || inst->force_writemask_all);
1114    assert(inst->mlen != 0);
1115 
1116    brw_oword_block_read_scratch(p, dst, brw_message_reg(inst->base_mrf),
1117                                 inst->exec_size / 8, inst->offset);
1118 }
1119 
1120 void
generate_scratch_read_gen7(fs_inst * inst,struct brw_reg dst)1121 fs_generator::generate_scratch_read_gen7(fs_inst *inst, struct brw_reg dst)
1122 {
1123    assert(inst->exec_size <= 16 || inst->force_writemask_all);
1124 
1125    gen7_block_read_scratch(p, dst, inst->exec_size / 8, inst->offset);
1126 }
1127 
1128 void
generate_uniform_pull_constant_load(fs_inst * inst,struct brw_reg dst,struct brw_reg index,struct brw_reg offset)1129 fs_generator::generate_uniform_pull_constant_load(fs_inst *inst,
1130                                                   struct brw_reg dst,
1131                                                   struct brw_reg index,
1132                                                   struct brw_reg offset)
1133 {
1134    assert(type_sz(dst.type) == 4);
1135    assert(inst->mlen != 0);
1136 
1137    assert(index.file == BRW_IMMEDIATE_VALUE &&
1138 	  index.type == BRW_REGISTER_TYPE_UD);
1139    uint32_t surf_index = index.ud;
1140 
1141    assert(offset.file == BRW_IMMEDIATE_VALUE &&
1142 	  offset.type == BRW_REGISTER_TYPE_UD);
1143    uint32_t read_offset = offset.ud;
1144 
1145    brw_oword_block_read(p, dst, brw_message_reg(inst->base_mrf),
1146 			read_offset, surf_index);
1147 }
1148 
1149 void
generate_uniform_pull_constant_load_gen7(fs_inst * inst,struct brw_reg dst,struct brw_reg index,struct brw_reg payload)1150 fs_generator::generate_uniform_pull_constant_load_gen7(fs_inst *inst,
1151                                                        struct brw_reg dst,
1152                                                        struct brw_reg index,
1153                                                        struct brw_reg payload)
1154 {
1155    assert(index.type == BRW_REGISTER_TYPE_UD);
1156    assert(payload.file == BRW_GENERAL_REGISTER_FILE);
1157    assert(type_sz(dst.type) == 4);
1158 
1159    if (index.file == BRW_IMMEDIATE_VALUE) {
1160       const uint32_t surf_index = index.ud;
1161 
1162       brw_push_insn_state(p);
1163       brw_set_default_mask_control(p, BRW_MASK_DISABLE);
1164       brw_inst *send = brw_next_insn(p, BRW_OPCODE_SEND);
1165       brw_pop_insn_state(p);
1166 
1167       brw_set_dest(p, send, retype(dst, BRW_REGISTER_TYPE_UD));
1168       brw_set_src0(p, send, retype(payload, BRW_REGISTER_TYPE_UD));
1169       brw_set_dp_read_message(p, send, surf_index,
1170                               BRW_DATAPORT_OWORD_BLOCK_DWORDS(inst->exec_size),
1171                               GEN7_DATAPORT_DC_OWORD_BLOCK_READ,
1172                               GEN6_SFID_DATAPORT_CONSTANT_CACHE,
1173                               1, /* mlen */
1174                               true, /* header */
1175                               DIV_ROUND_UP(inst->size_written, REG_SIZE));
1176 
1177    } else {
1178       struct brw_reg addr = vec1(retype(brw_address_reg(0), BRW_REGISTER_TYPE_UD));
1179 
1180       brw_push_insn_state(p);
1181       brw_set_default_mask_control(p, BRW_MASK_DISABLE);
1182 
1183       /* a0.0 = surf_index & 0xff */
1184       brw_inst *insn_and = brw_next_insn(p, BRW_OPCODE_AND);
1185       brw_inst_set_exec_size(p->devinfo, insn_and, BRW_EXECUTE_1);
1186       brw_set_dest(p, insn_and, addr);
1187       brw_set_src0(p, insn_and, vec1(retype(index, BRW_REGISTER_TYPE_UD)));
1188       brw_set_src1(p, insn_and, brw_imm_ud(0x0ff));
1189 
1190       /* dst = send(payload, a0.0 | <descriptor>) */
1191       brw_inst *insn = brw_send_indirect_message(
1192          p, GEN6_SFID_DATAPORT_CONSTANT_CACHE,
1193          retype(dst, BRW_REGISTER_TYPE_UD),
1194          retype(payload, BRW_REGISTER_TYPE_UD), addr);
1195       brw_set_dp_read_message(p, insn, 0 /* surface */,
1196                               BRW_DATAPORT_OWORD_BLOCK_DWORDS(inst->exec_size),
1197                               GEN7_DATAPORT_DC_OWORD_BLOCK_READ,
1198                               GEN6_SFID_DATAPORT_CONSTANT_CACHE,
1199                               1, /* mlen */
1200                               true, /* header */
1201                               DIV_ROUND_UP(inst->size_written, REG_SIZE));
1202 
1203       brw_pop_insn_state(p);
1204    }
1205 }
1206 
1207 void
generate_varying_pull_constant_load_gen4(fs_inst * inst,struct brw_reg dst,struct brw_reg index)1208 fs_generator::generate_varying_pull_constant_load_gen4(fs_inst *inst,
1209                                                        struct brw_reg dst,
1210                                                        struct brw_reg index)
1211 {
1212    assert(devinfo->gen < 7); /* Should use the gen7 variant. */
1213    assert(inst->header_size != 0);
1214    assert(inst->mlen);
1215 
1216    assert(index.file == BRW_IMMEDIATE_VALUE &&
1217 	  index.type == BRW_REGISTER_TYPE_UD);
1218    uint32_t surf_index = index.ud;
1219 
1220    uint32_t simd_mode, rlen, msg_type;
1221    if (inst->exec_size == 16) {
1222       simd_mode = BRW_SAMPLER_SIMD_MODE_SIMD16;
1223       rlen = 8;
1224    } else {
1225       assert(inst->exec_size == 8);
1226       simd_mode = BRW_SAMPLER_SIMD_MODE_SIMD8;
1227       rlen = 4;
1228    }
1229 
1230    if (devinfo->gen >= 5)
1231       msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE_LD;
1232    else {
1233       /* We always use the SIMD16 message so that we only have to load U, and
1234        * not V or R.
1235        */
1236       msg_type = BRW_SAMPLER_MESSAGE_SIMD16_LD;
1237       assert(inst->mlen == 3);
1238       assert(inst->size_written == 8 * REG_SIZE);
1239       rlen = 8;
1240       simd_mode = BRW_SAMPLER_SIMD_MODE_SIMD16;
1241    }
1242 
1243    struct brw_reg header = brw_vec8_grf(0, 0);
1244    gen6_resolve_implied_move(p, &header, inst->base_mrf);
1245 
1246    brw_inst *send = brw_next_insn(p, BRW_OPCODE_SEND);
1247    brw_inst_set_compression(devinfo, send, false);
1248    brw_set_dest(p, send, retype(dst, BRW_REGISTER_TYPE_UW));
1249    brw_set_src0(p, send, header);
1250    if (devinfo->gen < 6)
1251       brw_inst_set_base_mrf(p->devinfo, send, inst->base_mrf);
1252 
1253    /* Our surface is set up as floats, regardless of what actual data is
1254     * stored in it.
1255     */
1256    uint32_t return_format = BRW_SAMPLER_RETURN_FORMAT_FLOAT32;
1257    brw_set_sampler_message(p, send,
1258                            surf_index,
1259                            0, /* sampler (unused) */
1260                            msg_type,
1261                            rlen,
1262                            inst->mlen,
1263                            inst->header_size != 0,
1264                            simd_mode,
1265                            return_format);
1266 }
1267 
1268 void
generate_varying_pull_constant_load_gen7(fs_inst * inst,struct brw_reg dst,struct brw_reg index,struct brw_reg offset)1269 fs_generator::generate_varying_pull_constant_load_gen7(fs_inst *inst,
1270                                                        struct brw_reg dst,
1271                                                        struct brw_reg index,
1272                                                        struct brw_reg offset)
1273 {
1274    assert(devinfo->gen >= 7);
1275    /* Varying-offset pull constant loads are treated as a normal expression on
1276     * gen7, so the fact that it's a send message is hidden at the IR level.
1277     */
1278    assert(inst->header_size == 0);
1279    assert(!inst->mlen);
1280    assert(index.type == BRW_REGISTER_TYPE_UD);
1281 
1282    uint32_t simd_mode, rlen, mlen;
1283    if (inst->exec_size == 16) {
1284       mlen = 2;
1285       rlen = 8;
1286       simd_mode = BRW_SAMPLER_SIMD_MODE_SIMD16;
1287    } else {
1288       assert(inst->exec_size == 8);
1289       mlen = 1;
1290       rlen = 4;
1291       simd_mode = BRW_SAMPLER_SIMD_MODE_SIMD8;
1292    }
1293 
1294    if (index.file == BRW_IMMEDIATE_VALUE) {
1295 
1296       uint32_t surf_index = index.ud;
1297 
1298       brw_inst *send = brw_next_insn(p, BRW_OPCODE_SEND);
1299       brw_set_dest(p, send, retype(dst, BRW_REGISTER_TYPE_UW));
1300       brw_set_src0(p, send, offset);
1301       brw_set_sampler_message(p, send,
1302                               surf_index,
1303                               0, /* LD message ignores sampler unit */
1304                               GEN5_SAMPLER_MESSAGE_SAMPLE_LD,
1305                               rlen,
1306                               mlen,
1307                               false, /* no header */
1308                               simd_mode,
1309                               0);
1310 
1311    } else {
1312 
1313       struct brw_reg addr = vec1(retype(brw_address_reg(0), BRW_REGISTER_TYPE_UD));
1314 
1315       brw_push_insn_state(p);
1316       brw_set_default_mask_control(p, BRW_MASK_DISABLE);
1317 
1318       /* a0.0 = surf_index & 0xff */
1319       brw_inst *insn_and = brw_next_insn(p, BRW_OPCODE_AND);
1320       brw_inst_set_exec_size(p->devinfo, insn_and, BRW_EXECUTE_1);
1321       brw_set_dest(p, insn_and, addr);
1322       brw_set_src0(p, insn_and, vec1(retype(index, BRW_REGISTER_TYPE_UD)));
1323       brw_set_src1(p, insn_and, brw_imm_ud(0x0ff));
1324 
1325       brw_pop_insn_state(p);
1326 
1327       /* dst = send(offset, a0.0 | <descriptor>) */
1328       brw_inst *insn = brw_send_indirect_message(
1329          p, BRW_SFID_SAMPLER, retype(dst, BRW_REGISTER_TYPE_UW),
1330          offset, addr);
1331       brw_set_sampler_message(p, insn,
1332                               0 /* surface */,
1333                               0 /* sampler */,
1334                               GEN5_SAMPLER_MESSAGE_SAMPLE_LD,
1335                               rlen /* rlen */,
1336                               mlen /* mlen */,
1337                               false /* header */,
1338                               simd_mode,
1339                               0);
1340    }
1341 }
1342 
1343 /**
1344  * Cause the current pixel/sample mask (from R1.7 bits 15:0) to be transferred
1345  * into the flags register (f0.0).
1346  *
1347  * Used only on Gen6 and above.
1348  */
1349 void
generate_mov_dispatch_to_flags(fs_inst * inst)1350 fs_generator::generate_mov_dispatch_to_flags(fs_inst *inst)
1351 {
1352    struct brw_reg flags = brw_flag_reg(0, inst->flag_subreg);
1353    struct brw_reg dispatch_mask;
1354 
1355    if (devinfo->gen >= 6)
1356       dispatch_mask = retype(brw_vec1_grf(1, 7), BRW_REGISTER_TYPE_UW);
1357    else
1358       dispatch_mask = retype(brw_vec1_grf(0, 0), BRW_REGISTER_TYPE_UW);
1359 
1360    brw_push_insn_state(p);
1361    brw_set_default_mask_control(p, BRW_MASK_DISABLE);
1362    brw_MOV(p, flags, dispatch_mask);
1363    brw_pop_insn_state(p);
1364 }
1365 
1366 void
generate_pixel_interpolator_query(fs_inst * inst,struct brw_reg dst,struct brw_reg src,struct brw_reg msg_data,unsigned msg_type)1367 fs_generator::generate_pixel_interpolator_query(fs_inst *inst,
1368                                                 struct brw_reg dst,
1369                                                 struct brw_reg src,
1370                                                 struct brw_reg msg_data,
1371                                                 unsigned msg_type)
1372 {
1373    assert(inst->size_written % REG_SIZE == 0);
1374    assert(msg_data.type == BRW_REGISTER_TYPE_UD);
1375 
1376    brw_pixel_interpolator_query(p,
1377          retype(dst, BRW_REGISTER_TYPE_UW),
1378          src,
1379          inst->pi_noperspective,
1380          msg_type,
1381          msg_data,
1382          inst->mlen,
1383          inst->size_written / REG_SIZE);
1384 }
1385 
1386 /* Sets vstride=1, width=4, hstride=0 of register src1 during
1387  * the ADD instruction.
1388  */
1389 void
generate_set_sample_id(fs_inst * inst,struct brw_reg dst,struct brw_reg src0,struct brw_reg src1)1390 fs_generator::generate_set_sample_id(fs_inst *inst,
1391                                      struct brw_reg dst,
1392                                      struct brw_reg src0,
1393                                      struct brw_reg src1)
1394 {
1395    assert(dst.type == BRW_REGISTER_TYPE_D ||
1396           dst.type == BRW_REGISTER_TYPE_UD);
1397    assert(src0.type == BRW_REGISTER_TYPE_D ||
1398           src0.type == BRW_REGISTER_TYPE_UD);
1399 
1400    struct brw_reg reg = stride(src1, 1, 4, 0);
1401    if (devinfo->gen >= 8 || inst->exec_size == 8) {
1402       brw_ADD(p, dst, src0, reg);
1403    } else if (inst->exec_size == 16) {
1404       brw_push_insn_state(p);
1405       brw_set_default_exec_size(p, BRW_EXECUTE_8);
1406       brw_set_default_compression_control(p, BRW_COMPRESSION_NONE);
1407       brw_ADD(p, firsthalf(dst), firsthalf(src0), reg);
1408       brw_set_default_compression_control(p, BRW_COMPRESSION_2NDHALF);
1409       brw_ADD(p, sechalf(dst), sechalf(src0), suboffset(reg, 2));
1410       brw_pop_insn_state(p);
1411    }
1412 }
1413 
1414 void
generate_pack_half_2x16_split(fs_inst * inst,struct brw_reg dst,struct brw_reg x,struct brw_reg y)1415 fs_generator::generate_pack_half_2x16_split(fs_inst *inst,
1416                                             struct brw_reg dst,
1417                                             struct brw_reg x,
1418                                             struct brw_reg y)
1419 {
1420    assert(devinfo->gen >= 7);
1421    assert(dst.type == BRW_REGISTER_TYPE_UD);
1422    assert(x.type == BRW_REGISTER_TYPE_F);
1423    assert(y.type == BRW_REGISTER_TYPE_F);
1424 
1425    /* From the Ivybridge PRM, Vol4, Part3, Section 6.27 f32to16:
1426     *
1427     *   Because this instruction does not have a 16-bit floating-point type,
1428     *   the destination data type must be Word (W).
1429     *
1430     *   The destination must be DWord-aligned and specify a horizontal stride
1431     *   (HorzStride) of 2. The 16-bit result is stored in the lower word of
1432     *   each destination channel and the upper word is not modified.
1433     */
1434    struct brw_reg dst_w = spread(retype(dst, BRW_REGISTER_TYPE_W), 2);
1435 
1436    /* Give each 32-bit channel of dst the form below, where "." means
1437     * unchanged.
1438     *   0x....hhhh
1439     */
1440    brw_F32TO16(p, dst_w, y);
1441 
1442    /* Now the form:
1443     *   0xhhhh0000
1444     */
1445    brw_SHL(p, dst, dst, brw_imm_ud(16u));
1446 
1447    /* And, finally the form of packHalf2x16's output:
1448     *   0xhhhhllll
1449     */
1450    brw_F32TO16(p, dst_w, x);
1451 }
1452 
1453 void
generate_unpack_half_2x16_split(fs_inst * inst,struct brw_reg dst,struct brw_reg src)1454 fs_generator::generate_unpack_half_2x16_split(fs_inst *inst,
1455                                               struct brw_reg dst,
1456                                               struct brw_reg src)
1457 {
1458    assert(devinfo->gen >= 7);
1459    assert(dst.type == BRW_REGISTER_TYPE_F);
1460    assert(src.type == BRW_REGISTER_TYPE_UD);
1461 
1462    /* From the Ivybridge PRM, Vol4, Part3, Section 6.26 f16to32:
1463     *
1464     *   Because this instruction does not have a 16-bit floating-point type,
1465     *   the source data type must be Word (W). The destination type must be
1466     *   F (Float).
1467     */
1468    struct brw_reg src_w = spread(retype(src, BRW_REGISTER_TYPE_W), 2);
1469 
1470    /* Each channel of src has the form of unpackHalf2x16's input: 0xhhhhllll.
1471     * For the Y case, we wish to access only the upper word; therefore
1472     * a 16-bit subregister offset is needed.
1473     */
1474    assert(inst->opcode == FS_OPCODE_UNPACK_HALF_2x16_SPLIT_X ||
1475           inst->opcode == FS_OPCODE_UNPACK_HALF_2x16_SPLIT_Y);
1476    if (inst->opcode == FS_OPCODE_UNPACK_HALF_2x16_SPLIT_Y)
1477       src_w.subnr += 2;
1478 
1479    brw_F16TO32(p, dst, src_w);
1480 }
1481 
1482 void
generate_shader_time_add(fs_inst * inst,struct brw_reg payload,struct brw_reg offset,struct brw_reg value)1483 fs_generator::generate_shader_time_add(fs_inst *inst,
1484                                        struct brw_reg payload,
1485                                        struct brw_reg offset,
1486                                        struct brw_reg value)
1487 {
1488    assert(devinfo->gen >= 7);
1489    brw_push_insn_state(p);
1490    brw_set_default_mask_control(p, true);
1491 
1492    assert(payload.file == BRW_GENERAL_REGISTER_FILE);
1493    struct brw_reg payload_offset = retype(brw_vec1_grf(payload.nr, 0),
1494                                           offset.type);
1495    struct brw_reg payload_value = retype(brw_vec1_grf(payload.nr + 1, 0),
1496                                          value.type);
1497 
1498    assert(offset.file == BRW_IMMEDIATE_VALUE);
1499    if (value.file == BRW_GENERAL_REGISTER_FILE) {
1500       value.width = BRW_WIDTH_1;
1501       value.hstride = BRW_HORIZONTAL_STRIDE_0;
1502       value.vstride = BRW_VERTICAL_STRIDE_0;
1503    } else {
1504       assert(value.file == BRW_IMMEDIATE_VALUE);
1505    }
1506 
1507    /* Trying to deal with setup of the params from the IR is crazy in the FS8
1508     * case, and we don't really care about squeezing every bit of performance
1509     * out of this path, so we just emit the MOVs from here.
1510     */
1511    brw_MOV(p, payload_offset, offset);
1512    brw_MOV(p, payload_value, value);
1513    brw_shader_time_add(p, payload,
1514                        prog_data->binding_table.shader_time_start);
1515    brw_pop_insn_state(p);
1516 
1517    brw_mark_surface_used(prog_data,
1518                          prog_data->binding_table.shader_time_start);
1519 }
1520 
1521 void
enable_debug(const char * shader_name)1522 fs_generator::enable_debug(const char *shader_name)
1523 {
1524    debug_flag = true;
1525    this->shader_name = shader_name;
1526 }
1527 
1528 int
generate_code(const cfg_t * cfg,int dispatch_width)1529 fs_generator::generate_code(const cfg_t *cfg, int dispatch_width)
1530 {
1531    /* align to 64 byte boundary. */
1532    while (p->next_insn_offset % 64)
1533       brw_NOP(p);
1534 
1535    this->dispatch_width = dispatch_width;
1536 
1537    int start_offset = p->next_insn_offset;
1538    int spill_count = 0, fill_count = 0;
1539    int loop_count = 0;
1540 
1541    struct annotation_info annotation;
1542    memset(&annotation, 0, sizeof(annotation));
1543 
1544    foreach_block_and_inst (block, fs_inst, inst, cfg) {
1545       struct brw_reg src[3], dst;
1546       unsigned int last_insn_offset = p->next_insn_offset;
1547       bool multiple_instructions_emitted = false;
1548 
1549       /* From the Broadwell PRM, Volume 7, "3D-Media-GPGPU", in the
1550        * "Register Region Restrictions" section: for BDW, SKL:
1551        *
1552        *    "A POW/FDIV operation must not be followed by an instruction
1553        *     that requires two destination registers."
1554        *
1555        * The documentation is often lacking annotations for Atom parts,
1556        * and empirically this affects CHV as well.
1557        */
1558       if (devinfo->gen >= 8 &&
1559           p->nr_insn > 1 &&
1560           brw_inst_opcode(devinfo, brw_last_inst) == BRW_OPCODE_MATH &&
1561           brw_inst_math_function(devinfo, brw_last_inst) == BRW_MATH_FUNCTION_POW &&
1562           inst->dst.component_size(inst->exec_size) > REG_SIZE) {
1563          brw_NOP(p);
1564          last_insn_offset = p->next_insn_offset;
1565       }
1566 
1567       if (unlikely(debug_flag))
1568          annotate(p->devinfo, &annotation, cfg, inst, p->next_insn_offset);
1569 
1570       /* If the instruction writes to more than one register, it needs to be
1571        * explicitly marked as compressed on Gen <= 5.  On Gen >= 6 the
1572        * hardware figures out by itself what the right compression mode is,
1573        * but we still need to know whether the instruction is compressed to
1574        * set up the source register regions appropriately.
1575        *
1576        * XXX - This is wrong for instructions that write a single register but
1577        *       read more than one which should strictly speaking be treated as
1578        *       compressed.  For instructions that don't write any registers it
1579        *       relies on the destination being a null register of the correct
1580        *       type and regioning so the instruction is considered compressed
1581        *       or not accordingly.
1582        */
1583       const bool compressed =
1584            inst->dst.component_size(inst->exec_size) > REG_SIZE;
1585       brw_set_default_compression(p, compressed);
1586       brw_set_default_group(p, inst->group);
1587 
1588       for (unsigned int i = 0; i < inst->sources; i++) {
1589          src[i] = brw_reg_from_fs_reg(inst, &inst->src[i], devinfo->gen,
1590                                       compressed);
1591 
1592 	 /* The accumulator result appears to get used for the
1593 	  * conditional modifier generation.  When negating a UD
1594 	  * value, there is a 33rd bit generated for the sign in the
1595 	  * accumulator value, so now you can't check, for example,
1596 	  * equality with a 32-bit value.  See piglit fs-op-neg-uvec4.
1597 	  */
1598 	 assert(!inst->conditional_mod ||
1599 		inst->src[i].type != BRW_REGISTER_TYPE_UD ||
1600 		!inst->src[i].negate);
1601       }
1602       dst = brw_reg_from_fs_reg(inst, &inst->dst, devinfo->gen, compressed);
1603 
1604       brw_set_default_access_mode(p, BRW_ALIGN_1);
1605       brw_set_default_predicate_control(p, inst->predicate);
1606       brw_set_default_predicate_inverse(p, inst->predicate_inverse);
1607       brw_set_default_flag_reg(p, 0, inst->flag_subreg);
1608       brw_set_default_saturate(p, inst->saturate);
1609       brw_set_default_mask_control(p, inst->force_writemask_all);
1610       brw_set_default_acc_write_control(p, inst->writes_accumulator);
1611       brw_set_default_exec_size(p, cvt(inst->exec_size) - 1);
1612 
1613       assert(inst->force_writemask_all || inst->exec_size >= 4);
1614       assert(inst->force_writemask_all || inst->group % inst->exec_size == 0);
1615       assert(inst->base_mrf + inst->mlen <= BRW_MAX_MRF(devinfo->gen));
1616       assert(inst->mlen <= BRW_MAX_MSG_LENGTH);
1617 
1618       switch (inst->opcode) {
1619       case BRW_OPCODE_MOV:
1620 	 brw_MOV(p, dst, src[0]);
1621 	 break;
1622       case BRW_OPCODE_ADD:
1623 	 brw_ADD(p, dst, src[0], src[1]);
1624 	 break;
1625       case BRW_OPCODE_MUL:
1626 	 brw_MUL(p, dst, src[0], src[1]);
1627 	 break;
1628       case BRW_OPCODE_AVG:
1629 	 brw_AVG(p, dst, src[0], src[1]);
1630 	 break;
1631       case BRW_OPCODE_MACH:
1632 	 brw_MACH(p, dst, src[0], src[1]);
1633 	 break;
1634 
1635       case BRW_OPCODE_LINE:
1636          brw_LINE(p, dst, src[0], src[1]);
1637          break;
1638 
1639       case BRW_OPCODE_MAD:
1640          assert(devinfo->gen >= 6);
1641 	 brw_set_default_access_mode(p, BRW_ALIGN_16);
1642          brw_MAD(p, dst, src[0], src[1], src[2]);
1643 	 break;
1644 
1645       case BRW_OPCODE_LRP:
1646          assert(devinfo->gen >= 6);
1647 	 brw_set_default_access_mode(p, BRW_ALIGN_16);
1648          brw_LRP(p, dst, src[0], src[1], src[2]);
1649 	 break;
1650 
1651       case BRW_OPCODE_FRC:
1652 	 brw_FRC(p, dst, src[0]);
1653 	 break;
1654       case BRW_OPCODE_RNDD:
1655 	 brw_RNDD(p, dst, src[0]);
1656 	 break;
1657       case BRW_OPCODE_RNDE:
1658 	 brw_RNDE(p, dst, src[0]);
1659 	 break;
1660       case BRW_OPCODE_RNDZ:
1661 	 brw_RNDZ(p, dst, src[0]);
1662 	 break;
1663 
1664       case BRW_OPCODE_AND:
1665 	 brw_AND(p, dst, src[0], src[1]);
1666 	 break;
1667       case BRW_OPCODE_OR:
1668 	 brw_OR(p, dst, src[0], src[1]);
1669 	 break;
1670       case BRW_OPCODE_XOR:
1671 	 brw_XOR(p, dst, src[0], src[1]);
1672 	 break;
1673       case BRW_OPCODE_NOT:
1674 	 brw_NOT(p, dst, src[0]);
1675 	 break;
1676       case BRW_OPCODE_ASR:
1677 	 brw_ASR(p, dst, src[0], src[1]);
1678 	 break;
1679       case BRW_OPCODE_SHR:
1680 	 brw_SHR(p, dst, src[0], src[1]);
1681 	 break;
1682       case BRW_OPCODE_SHL:
1683 	 brw_SHL(p, dst, src[0], src[1]);
1684 	 break;
1685       case BRW_OPCODE_F32TO16:
1686          assert(devinfo->gen >= 7);
1687          brw_F32TO16(p, dst, src[0]);
1688          break;
1689       case BRW_OPCODE_F16TO32:
1690          assert(devinfo->gen >= 7);
1691          brw_F16TO32(p, dst, src[0]);
1692          break;
1693       case BRW_OPCODE_CMP:
1694          if (inst->exec_size >= 16 && devinfo->gen == 7 && !devinfo->is_haswell &&
1695              dst.file == BRW_ARCHITECTURE_REGISTER_FILE) {
1696             /* For unknown reasons the WaCMPInstFlagDepClearedEarly workaround
1697              * implemented in the compiler is not sufficient. Overriding the
1698              * type when the destination is the null register is necessary but
1699              * not sufficient by itself.
1700              */
1701             assert(dst.nr == BRW_ARF_NULL);
1702             dst.type = BRW_REGISTER_TYPE_D;
1703          }
1704          brw_CMP(p, dst, inst->conditional_mod, src[0], src[1]);
1705 	 break;
1706       case BRW_OPCODE_SEL:
1707 	 brw_SEL(p, dst, src[0], src[1]);
1708 	 break;
1709       case BRW_OPCODE_BFREV:
1710          assert(devinfo->gen >= 7);
1711          /* BFREV only supports UD type for src and dst. */
1712          brw_BFREV(p, retype(dst, BRW_REGISTER_TYPE_UD),
1713                       retype(src[0], BRW_REGISTER_TYPE_UD));
1714          break;
1715       case BRW_OPCODE_FBH:
1716          assert(devinfo->gen >= 7);
1717          /* FBH only supports UD type for dst. */
1718          brw_FBH(p, retype(dst, BRW_REGISTER_TYPE_UD), src[0]);
1719          break;
1720       case BRW_OPCODE_FBL:
1721          assert(devinfo->gen >= 7);
1722          /* FBL only supports UD type for dst. */
1723          brw_FBL(p, retype(dst, BRW_REGISTER_TYPE_UD), src[0]);
1724          break;
1725       case BRW_OPCODE_LZD:
1726          brw_LZD(p, dst, src[0]);
1727          break;
1728       case BRW_OPCODE_CBIT:
1729          assert(devinfo->gen >= 7);
1730          /* CBIT only supports UD type for dst. */
1731          brw_CBIT(p, retype(dst, BRW_REGISTER_TYPE_UD), src[0]);
1732          break;
1733       case BRW_OPCODE_ADDC:
1734          assert(devinfo->gen >= 7);
1735          brw_ADDC(p, dst, src[0], src[1]);
1736          break;
1737       case BRW_OPCODE_SUBB:
1738          assert(devinfo->gen >= 7);
1739          brw_SUBB(p, dst, src[0], src[1]);
1740          break;
1741       case BRW_OPCODE_MAC:
1742          brw_MAC(p, dst, src[0], src[1]);
1743          break;
1744 
1745       case BRW_OPCODE_BFE:
1746          assert(devinfo->gen >= 7);
1747          brw_set_default_access_mode(p, BRW_ALIGN_16);
1748          brw_BFE(p, dst, src[0], src[1], src[2]);
1749          break;
1750 
1751       case BRW_OPCODE_BFI1:
1752          assert(devinfo->gen >= 7);
1753          brw_BFI1(p, dst, src[0], src[1]);
1754          break;
1755       case BRW_OPCODE_BFI2:
1756          assert(devinfo->gen >= 7);
1757          brw_set_default_access_mode(p, BRW_ALIGN_16);
1758          brw_BFI2(p, dst, src[0], src[1], src[2]);
1759          break;
1760 
1761       case BRW_OPCODE_IF:
1762 	 if (inst->src[0].file != BAD_FILE) {
1763 	    /* The instruction has an embedded compare (only allowed on gen6) */
1764 	    assert(devinfo->gen == 6);
1765 	    gen6_IF(p, inst->conditional_mod, src[0], src[1]);
1766 	 } else {
1767 	    brw_IF(p, brw_inst_exec_size(devinfo, p->current));
1768 	 }
1769 	 break;
1770 
1771       case BRW_OPCODE_ELSE:
1772 	 brw_ELSE(p);
1773 	 break;
1774       case BRW_OPCODE_ENDIF:
1775 	 brw_ENDIF(p);
1776 	 break;
1777 
1778       case BRW_OPCODE_DO:
1779 	 brw_DO(p, brw_inst_exec_size(devinfo, p->current));
1780 	 break;
1781 
1782       case BRW_OPCODE_BREAK:
1783 	 brw_BREAK(p);
1784 	 break;
1785       case BRW_OPCODE_CONTINUE:
1786          brw_CONT(p);
1787 	 break;
1788 
1789       case BRW_OPCODE_WHILE:
1790 	 brw_WHILE(p);
1791          loop_count++;
1792 	 break;
1793 
1794       case SHADER_OPCODE_RCP:
1795       case SHADER_OPCODE_RSQ:
1796       case SHADER_OPCODE_SQRT:
1797       case SHADER_OPCODE_EXP2:
1798       case SHADER_OPCODE_LOG2:
1799       case SHADER_OPCODE_SIN:
1800       case SHADER_OPCODE_COS:
1801          assert(inst->conditional_mod == BRW_CONDITIONAL_NONE);
1802 	 if (devinfo->gen >= 6) {
1803             assert(inst->mlen == 0);
1804             assert(devinfo->gen >= 7 || inst->exec_size == 8);
1805             gen6_math(p, dst, brw_math_function(inst->opcode),
1806                       src[0], brw_null_reg());
1807 	 } else {
1808             assert(inst->mlen >= 1);
1809             assert(devinfo->gen == 5 || devinfo->is_g4x || inst->exec_size == 8);
1810             gen4_math(p, dst,
1811                       brw_math_function(inst->opcode),
1812                       inst->base_mrf, src[0],
1813                       BRW_MATH_PRECISION_FULL);
1814 	 }
1815 	 break;
1816       case SHADER_OPCODE_INT_QUOTIENT:
1817       case SHADER_OPCODE_INT_REMAINDER:
1818       case SHADER_OPCODE_POW:
1819          assert(inst->conditional_mod == BRW_CONDITIONAL_NONE);
1820          if (devinfo->gen >= 6) {
1821             assert(inst->mlen == 0);
1822             assert((devinfo->gen >= 7 && inst->opcode == SHADER_OPCODE_POW) ||
1823                    inst->exec_size == 8);
1824             gen6_math(p, dst, brw_math_function(inst->opcode), src[0], src[1]);
1825          } else {
1826             assert(inst->mlen >= 1);
1827             assert(inst->exec_size == 8);
1828             gen4_math(p, dst, brw_math_function(inst->opcode),
1829                       inst->base_mrf, src[0],
1830                       BRW_MATH_PRECISION_FULL);
1831 	 }
1832 	 break;
1833       case FS_OPCODE_CINTERP:
1834 	 brw_MOV(p, dst, src[0]);
1835 	 break;
1836       case FS_OPCODE_LINTERP:
1837 	 generate_linterp(inst, dst, src);
1838 	 break;
1839       case FS_OPCODE_PIXEL_X:
1840          assert(src[0].type == BRW_REGISTER_TYPE_UW);
1841          src[0].subnr = 0 * type_sz(src[0].type);
1842          brw_MOV(p, dst, stride(src[0], 8, 4, 1));
1843          break;
1844       case FS_OPCODE_PIXEL_Y:
1845          assert(src[0].type == BRW_REGISTER_TYPE_UW);
1846          src[0].subnr = 4 * type_sz(src[0].type);
1847          brw_MOV(p, dst, stride(src[0], 8, 4, 1));
1848          break;
1849       case FS_OPCODE_GET_BUFFER_SIZE:
1850          generate_get_buffer_size(inst, dst, src[0], src[1]);
1851          break;
1852       case SHADER_OPCODE_TEX:
1853       case FS_OPCODE_TXB:
1854       case SHADER_OPCODE_TXD:
1855       case SHADER_OPCODE_TXF:
1856       case SHADER_OPCODE_TXF_LZ:
1857       case SHADER_OPCODE_TXF_CMS:
1858       case SHADER_OPCODE_TXF_CMS_W:
1859       case SHADER_OPCODE_TXF_UMS:
1860       case SHADER_OPCODE_TXF_MCS:
1861       case SHADER_OPCODE_TXL:
1862       case SHADER_OPCODE_TXL_LZ:
1863       case SHADER_OPCODE_TXS:
1864       case SHADER_OPCODE_LOD:
1865       case SHADER_OPCODE_TG4:
1866       case SHADER_OPCODE_TG4_OFFSET:
1867       case SHADER_OPCODE_SAMPLEINFO:
1868 	 generate_tex(inst, dst, src[0], src[1], src[2]);
1869 	 break;
1870       case FS_OPCODE_DDX_COARSE:
1871       case FS_OPCODE_DDX_FINE:
1872          generate_ddx(inst->opcode, dst, src[0]);
1873          break;
1874       case FS_OPCODE_DDY_COARSE:
1875       case FS_OPCODE_DDY_FINE:
1876          generate_ddy(inst->opcode, dst, src[0]);
1877 	 break;
1878 
1879       case SHADER_OPCODE_GEN4_SCRATCH_WRITE:
1880 	 generate_scratch_write(inst, src[0]);
1881          spill_count++;
1882 	 break;
1883 
1884       case SHADER_OPCODE_GEN4_SCRATCH_READ:
1885 	 generate_scratch_read(inst, dst);
1886          fill_count++;
1887 	 break;
1888 
1889       case SHADER_OPCODE_GEN7_SCRATCH_READ:
1890 	 generate_scratch_read_gen7(inst, dst);
1891          fill_count++;
1892 	 break;
1893 
1894       case SHADER_OPCODE_MOV_INDIRECT:
1895          generate_mov_indirect(inst, dst, src[0], src[1]);
1896          break;
1897 
1898       case SHADER_OPCODE_URB_READ_SIMD8:
1899       case SHADER_OPCODE_URB_READ_SIMD8_PER_SLOT:
1900          generate_urb_read(inst, dst, src[0]);
1901          break;
1902 
1903       case SHADER_OPCODE_URB_WRITE_SIMD8:
1904       case SHADER_OPCODE_URB_WRITE_SIMD8_PER_SLOT:
1905       case SHADER_OPCODE_URB_WRITE_SIMD8_MASKED:
1906       case SHADER_OPCODE_URB_WRITE_SIMD8_MASKED_PER_SLOT:
1907 	 generate_urb_write(inst, src[0]);
1908 	 break;
1909 
1910       case FS_OPCODE_UNIFORM_PULL_CONSTANT_LOAD:
1911          assert(inst->force_writemask_all);
1912 	 generate_uniform_pull_constant_load(inst, dst, src[0], src[1]);
1913 	 break;
1914 
1915       case FS_OPCODE_UNIFORM_PULL_CONSTANT_LOAD_GEN7:
1916          assert(inst->force_writemask_all);
1917 	 generate_uniform_pull_constant_load_gen7(inst, dst, src[0], src[1]);
1918 	 break;
1919 
1920       case FS_OPCODE_VARYING_PULL_CONSTANT_LOAD_GEN4:
1921 	 generate_varying_pull_constant_load_gen4(inst, dst, src[0]);
1922 	 break;
1923 
1924       case FS_OPCODE_VARYING_PULL_CONSTANT_LOAD_GEN7:
1925 	 generate_varying_pull_constant_load_gen7(inst, dst, src[0], src[1]);
1926 	 break;
1927 
1928       case FS_OPCODE_REP_FB_WRITE:
1929       case FS_OPCODE_FB_WRITE:
1930 	 generate_fb_write(inst, src[0]);
1931 	 break;
1932 
1933       case FS_OPCODE_FB_READ:
1934          generate_fb_read(inst, dst, src[0]);
1935          break;
1936 
1937       case FS_OPCODE_MOV_DISPATCH_TO_FLAGS:
1938          generate_mov_dispatch_to_flags(inst);
1939          break;
1940 
1941       case FS_OPCODE_DISCARD_JUMP:
1942          generate_discard_jump(inst);
1943          break;
1944 
1945       case SHADER_OPCODE_SHADER_TIME_ADD:
1946          generate_shader_time_add(inst, src[0], src[1], src[2]);
1947          break;
1948 
1949       case SHADER_OPCODE_UNTYPED_ATOMIC:
1950          assert(src[2].file == BRW_IMMEDIATE_VALUE);
1951          brw_untyped_atomic(p, dst, src[0], src[1], src[2].ud,
1952                             inst->mlen, !inst->dst.is_null());
1953          break;
1954 
1955       case SHADER_OPCODE_UNTYPED_SURFACE_READ:
1956          assert(src[2].file == BRW_IMMEDIATE_VALUE);
1957          brw_untyped_surface_read(p, dst, src[0], src[1],
1958                                   inst->mlen, src[2].ud);
1959          break;
1960 
1961       case SHADER_OPCODE_UNTYPED_SURFACE_WRITE:
1962          assert(src[2].file == BRW_IMMEDIATE_VALUE);
1963          brw_untyped_surface_write(p, src[0], src[1],
1964                                    inst->mlen, src[2].ud);
1965          break;
1966 
1967       case SHADER_OPCODE_TYPED_ATOMIC:
1968          assert(src[2].file == BRW_IMMEDIATE_VALUE);
1969          brw_typed_atomic(p, dst, src[0], src[1],
1970                           src[2].ud, inst->mlen, !inst->dst.is_null());
1971          break;
1972 
1973       case SHADER_OPCODE_TYPED_SURFACE_READ:
1974          assert(src[2].file == BRW_IMMEDIATE_VALUE);
1975          brw_typed_surface_read(p, dst, src[0], src[1],
1976                                 inst->mlen, src[2].ud);
1977          break;
1978 
1979       case SHADER_OPCODE_TYPED_SURFACE_WRITE:
1980          assert(src[2].file == BRW_IMMEDIATE_VALUE);
1981          brw_typed_surface_write(p, src[0], src[1], inst->mlen, src[2].ud);
1982          break;
1983 
1984       case SHADER_OPCODE_MEMORY_FENCE:
1985          brw_memory_fence(p, dst);
1986          break;
1987 
1988       case SHADER_OPCODE_FIND_LIVE_CHANNEL: {
1989          const struct brw_reg mask =
1990             brw_stage_has_packed_dispatch(devinfo, stage,
1991                                           prog_data) ? brw_imm_ud(~0u) :
1992             stage == MESA_SHADER_FRAGMENT ? brw_vmask_reg() :
1993             brw_dmask_reg();
1994          brw_find_live_channel(p, dst, mask);
1995          break;
1996       }
1997 
1998       case SHADER_OPCODE_BROADCAST:
1999          assert(inst->force_writemask_all);
2000          brw_broadcast(p, dst, src[0], src[1]);
2001          break;
2002 
2003       case FS_OPCODE_SET_SAMPLE_ID:
2004          generate_set_sample_id(inst, dst, src[0], src[1]);
2005          break;
2006 
2007       case FS_OPCODE_PACK_HALF_2x16_SPLIT:
2008           generate_pack_half_2x16_split(inst, dst, src[0], src[1]);
2009           break;
2010 
2011       case FS_OPCODE_UNPACK_HALF_2x16_SPLIT_X:
2012       case FS_OPCODE_UNPACK_HALF_2x16_SPLIT_Y:
2013          generate_unpack_half_2x16_split(inst, dst, src[0]);
2014          break;
2015 
2016       case FS_OPCODE_PLACEHOLDER_HALT:
2017          /* This is the place where the final HALT needs to be inserted if
2018           * we've emitted any discards.  If not, this will emit no code.
2019           */
2020          if (!patch_discard_jumps_to_fb_writes()) {
2021             if (unlikely(debug_flag)) {
2022                annotation.ann_count--;
2023             }
2024          }
2025          break;
2026 
2027       case FS_OPCODE_INTERPOLATE_AT_SAMPLE:
2028          generate_pixel_interpolator_query(inst, dst, src[0], src[1],
2029                                            GEN7_PIXEL_INTERPOLATOR_LOC_SAMPLE);
2030          break;
2031 
2032       case FS_OPCODE_INTERPOLATE_AT_SHARED_OFFSET:
2033          generate_pixel_interpolator_query(inst, dst, src[0], src[1],
2034                                            GEN7_PIXEL_INTERPOLATOR_LOC_SHARED_OFFSET);
2035          break;
2036 
2037       case FS_OPCODE_INTERPOLATE_AT_PER_SLOT_OFFSET:
2038          generate_pixel_interpolator_query(inst, dst, src[0], src[1],
2039                                            GEN7_PIXEL_INTERPOLATOR_LOC_PER_SLOT_OFFSET);
2040          break;
2041 
2042       case CS_OPCODE_CS_TERMINATE:
2043          generate_cs_terminate(inst, src[0]);
2044          break;
2045 
2046       case SHADER_OPCODE_BARRIER:
2047 	 generate_barrier(inst, src[0]);
2048 	 break;
2049 
2050       case BRW_OPCODE_DIM:
2051          assert(devinfo->is_haswell);
2052          assert(src[0].type == BRW_REGISTER_TYPE_DF);
2053          assert(dst.type == BRW_REGISTER_TYPE_DF);
2054          brw_DIM(p, dst, retype(src[0], BRW_REGISTER_TYPE_F));
2055          break;
2056 
2057       default:
2058          unreachable("Unsupported opcode");
2059 
2060       case SHADER_OPCODE_LOAD_PAYLOAD:
2061          unreachable("Should be lowered by lower_load_payload()");
2062       }
2063 
2064       if (multiple_instructions_emitted)
2065          continue;
2066 
2067       if (inst->no_dd_clear || inst->no_dd_check || inst->conditional_mod) {
2068          assert(p->next_insn_offset == last_insn_offset + 16 ||
2069                 !"conditional_mod, no_dd_check, or no_dd_clear set for IR "
2070                  "emitting more than 1 instruction");
2071 
2072          brw_inst *last = &p->store[last_insn_offset / 16];
2073 
2074          if (inst->conditional_mod)
2075             brw_inst_set_cond_modifier(p->devinfo, last, inst->conditional_mod);
2076          brw_inst_set_no_dd_clear(p->devinfo, last, inst->no_dd_clear);
2077          brw_inst_set_no_dd_check(p->devinfo, last, inst->no_dd_check);
2078       }
2079    }
2080 
2081    brw_set_uip_jip(p, start_offset);
2082    annotation_finalize(&annotation, p->next_insn_offset);
2083 
2084 #ifndef NDEBUG
2085    bool validated = brw_validate_instructions(p, start_offset, &annotation);
2086 #else
2087    if (unlikely(debug_flag))
2088       brw_validate_instructions(p, start_offset, &annotation);
2089 #endif
2090 
2091    int before_size = p->next_insn_offset - start_offset;
2092    brw_compact_instructions(p, start_offset, annotation.ann_count,
2093                             annotation.ann);
2094    int after_size = p->next_insn_offset - start_offset;
2095 
2096    if (unlikely(debug_flag)) {
2097       fprintf(stderr, "Native code for %s\n"
2098               "SIMD%d shader: %d instructions. %d loops. %u cycles. %d:%d spills:fills. Promoted %u constants. Compacted %d to %d"
2099               " bytes (%.0f%%)\n",
2100               shader_name, dispatch_width, before_size / 16, loop_count, cfg->cycle_count,
2101               spill_count, fill_count, promoted_constants, before_size, after_size,
2102               100.0f * (before_size - after_size) / before_size);
2103 
2104       dump_assembly(p->store, annotation.ann_count, annotation.ann,
2105                     p->devinfo);
2106       ralloc_free(annotation.mem_ctx);
2107    }
2108    assert(validated);
2109 
2110    compiler->shader_debug_log(log_data,
2111                               "%s SIMD%d shader: %d inst, %d loops, %u cycles, "
2112                               "%d:%d spills:fills, Promoted %u constants, "
2113                               "compacted %d to %d bytes.",
2114                               _mesa_shader_stage_to_abbrev(stage),
2115                               dispatch_width, before_size / 16,
2116                               loop_count, cfg->cycle_count, spill_count,
2117                               fill_count, promoted_constants, before_size,
2118                               after_size);
2119 
2120    return start_offset;
2121 }
2122 
2123 const unsigned *
get_assembly(unsigned int * assembly_size)2124 fs_generator::get_assembly(unsigned int *assembly_size)
2125 {
2126    return brw_get_program(p, assembly_size);
2127 }
2128