1 /**************************************************************************
2 *
3 * dmfe.c -- Etherboot device driver for the Davicom
4 * DM9102/DM9102A/DM9102A+DM9801/DM9102A+DM9802 NIC fast ethernet card
5 *
6 * Written 2003-2003 by Timothy Legge <tlegge@rogers.com>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 *
22 * Portions of this code based on:
23 *
24 * dmfe.c: A Davicom DM9102/DM9102A/DM9102A+DM9801/DM9102A+DM9802
25 * NIC fast ethernet driver for Linux.
26 * Copyright (C) 1997 Sten Wang
27 * (C)Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved.
28 *
29 *
30 * REVISION HISTORY:
31 * ================
32 * v1.0 10-02-2004 timlegge Boots ltsp needs cleanup
33 *
34 * Indent Options: indent -kr -i8
35 *
36 *
37 ***************************************************************************/
38
39 FILE_LICENCE ( GPL2_OR_LATER );
40
41 /* to get some global routines like printf */
42 #include "etherboot.h"
43 /* to get the interface to the body of the program */
44 #include "nic.h"
45 /* to get the PCI support functions, if this is a PCI NIC */
46 #include <gpxe/pci.h>
47 #include <gpxe/ethernet.h>
48
49 /* #define EDEBUG 1 */
50 #ifdef EDEBUG
51 #define dprintf(x) printf x
52 #else
53 #define dprintf(x)
54 #endif
55
56 /* Condensed operations for readability. */
57 #define virt_to_le32desc(addr) cpu_to_le32(virt_to_bus(addr))
58 #define le32desc_to_virt(addr) bus_to_virt(le32_to_cpu(addr))
59
60 /* Board/System/Debug information/definition ---------------- */
61 #define PCI_DM9132_ID 0x91321282 /* Davicom DM9132 ID */
62 #define PCI_DM9102_ID 0x91021282 /* Davicom DM9102 ID */
63 #define PCI_DM9100_ID 0x91001282 /* Davicom DM9100 ID */
64 #define PCI_DM9009_ID 0x90091282 /* Davicom DM9009 ID */
65
66 #define DM9102_IO_SIZE 0x80
67 #define DM9102A_IO_SIZE 0x100
68 #define TX_MAX_SEND_CNT 0x1 /* Maximum tx packet per time */
69 #define TX_DESC_CNT 0x10 /* Allocated Tx descriptors */
70 #define RX_DESC_CNT 0x20 /* Allocated Rx descriptors */
71 #define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */
72 #define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */
73 #define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT)
74 #define TX_BUF_ALLOC 0x600
75 #define RX_ALLOC_SIZE 0x620
76 #define DM910X_RESET 1
77 #define CR0_DEFAULT 0x00E00000 /* TX & RX burst mode */
78 #define CR6_DEFAULT 0x00080000 /* HD */
79 #define CR7_DEFAULT 0x180c1
80 #define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */
81 #define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */
82 #define MAX_PACKET_SIZE 1514
83 #define DMFE_MAX_MULTICAST 14
84 #define RX_COPY_SIZE 100
85 #define MAX_CHECK_PACKET 0x8000
86 #define DM9801_NOISE_FLOOR 8
87 #define DM9802_NOISE_FLOOR 5
88
89 #define DMFE_10MHF 0
90 #define DMFE_100MHF 1
91 #define DMFE_10MFD 4
92 #define DMFE_100MFD 5
93 #define DMFE_AUTO 8
94 #define DMFE_1M_HPNA 0x10
95
96 #define DMFE_TXTH_72 0x400000 /* TX TH 72 byte */
97 #define DMFE_TXTH_96 0x404000 /* TX TH 96 byte */
98 #define DMFE_TXTH_128 0x0000 /* TX TH 128 byte */
99 #define DMFE_TXTH_256 0x4000 /* TX TH 256 byte */
100 #define DMFE_TXTH_512 0x8000 /* TX TH 512 byte */
101 #define DMFE_TXTH_1K 0xC000 /* TX TH 1K byte */
102
103 #define DMFE_TIMER_WUT (jiffies + HZ * 1) /* timer wakeup time : 1 second */
104 #define DMFE_TX_TIMEOUT ((3*HZ)/2) /* tx packet time-out time 1.5 s" */
105 #define DMFE_TX_KICK (HZ/2) /* tx packet Kick-out time 0.5 s" */
106
107 #define DMFE_DBUG(dbug_now, msg, value) if (dmfe_debug || (dbug_now)) printk(KERN_ERR DRV_NAME ": %s %lx\n", (msg), (long) (value))
108
109 #define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR DRV_NAME ": Change Speed to %sMhz %s duplex\n",mode & 1 ?"100":"10", mode & 4 ? "full":"half");
110
111
112 /* CR9 definition: SROM/MII */
113 #define CR9_SROM_READ 0x4800
114 #define CR9_SRCS 0x1
115 #define CR9_SRCLK 0x2
116 #define CR9_CRDOUT 0x8
117 #define SROM_DATA_0 0x0
118 #define SROM_DATA_1 0x4
119 #define PHY_DATA_1 0x20000
120 #define PHY_DATA_0 0x00000
121 #define MDCLKH 0x10000
122
123 #define PHY_POWER_DOWN 0x800
124
125 #define SROM_V41_CODE 0x14
126
127 #define SROM_CLK_WRITE(data, ioaddr) outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);udelay(5);outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr);udelay(5);outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);udelay(5);
128
129 #define __CHK_IO_SIZE(pci_id, dev_rev) ( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x02000030) ) ? DM9102A_IO_SIZE: DM9102_IO_SIZE
130 #define CHK_IO_SIZE(pci_dev, dev_rev) __CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, dev_rev)
131
132 /* Sten Check */
133 #define DEVICE net_device
134
135 /* Structure/enum declaration ------------------------------- */
136 struct tx_desc {
137 u32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */
138 void * tx_buf_ptr; /* Data for us */
139 struct tx_desc * next_tx_desc;
140 } __attribute__ ((aligned(32)));
141
142 struct rx_desc {
143 u32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */
144 void * rx_skb_ptr; /* Data for us */
145 struct rx_desc * next_rx_desc;
146 } __attribute__ ((aligned(32)));
147
148 static struct dmfe_private {
149 u32 chip_id; /* Chip vendor/Device ID */
150 u32 chip_revision; /* Chip revision */
151 u32 cr0_data;
152 // u32 cr5_data;
153 u32 cr6_data;
154 u32 cr7_data;
155 u32 cr15_data;
156
157 u16 HPNA_command; /* For HPNA register 16 */
158 u16 HPNA_timer; /* For HPNA remote device check */
159 u16 NIC_capability; /* NIC media capability */
160 u16 PHY_reg4; /* Saved Phyxcer register 4 value */
161
162 u8 HPNA_present; /* 0:none, 1:DM9801, 2:DM9802 */
163 u8 chip_type; /* Keep DM9102A chip type */
164 u8 media_mode; /* user specify media mode */
165 u8 op_mode; /* real work media mode */
166 u8 phy_addr;
167 u8 dm910x_chk_mode; /* Operating mode check */
168
169 /* NIC SROM data */
170 unsigned char srom[128];
171 /* Etherboot Only */
172 u8 cur_tx;
173 u8 cur_rx;
174 } dfx;
175
176 static struct dmfe_private *db;
177
178 enum dmfe_offsets {
179 DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20,
180 DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48,
181 DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 =
182 0x70,
183 DCR15 = 0x78
184 };
185
186 enum dmfe_CR6_bits {
187 CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80,
188 CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000,
189 CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000
190 };
191
192 /* Global variable declaration ----------------------------- */
193 static struct nic_operations dmfe_operations;
194
195 static unsigned char dmfe_media_mode = DMFE_AUTO;
196 static u32 dmfe_cr6_user_set;
197
198 /* For module input parameter */
199 static u8 chkmode = 1;
200 static u8 HPNA_mode; /* Default: Low Power/High Speed */
201 static u8 HPNA_rx_cmd; /* Default: Disable Rx remote command */
202 static u8 HPNA_tx_cmd; /* Default: Don't issue remote command */
203 static u8 HPNA_NoiseFloor; /* Default: HPNA NoiseFloor */
204 static u8 SF_mode; /* Special Function: 1:VLAN, 2:RX Flow Control
205 4: TX pause packet */
206
207
208 /**********************************************
209 * Descriptor Ring and Buffer defination
210 ***********************************************/
211 struct {
212 struct tx_desc txd[TX_DESC_CNT] __attribute__ ((aligned(32)));
213 unsigned char txb[TX_BUF_ALLOC * TX_DESC_CNT]
214 __attribute__ ((aligned(32)));
215 struct rx_desc rxd[RX_DESC_CNT] __attribute__ ((aligned(32)));
216 unsigned char rxb[RX_ALLOC_SIZE * RX_DESC_CNT]
217 __attribute__ ((aligned(32)));
218 } dmfe_bufs __shared;
219 #define txd dmfe_bufs.txd
220 #define txb dmfe_bufs.txb
221 #define rxd dmfe_bufs.rxd
222 #define rxb dmfe_bufs.rxb
223
224 /* NIC specific static variables go here */
225 static long int BASE;
226
227 static u16 read_srom_word(long ioaddr, int offset);
228 static void dmfe_init_dm910x(struct nic *nic);
229 static void dmfe_descriptor_init(struct nic *, unsigned long ioaddr);
230 static void update_cr6(u32, unsigned long);
231 static void send_filter_frame(struct nic *nic);
232 static void dm9132_id_table(struct nic *nic);
233
234 static u16 phy_read(unsigned long, u8, u8, u32);
235 static void phy_write(unsigned long, u8, u8, u16, u32);
236 static void phy_write_1bit(unsigned long, u32);
237 static u16 phy_read_1bit(unsigned long);
238 static void dmfe_set_phyxcer(struct nic *nic);
239
240 static void dmfe_parse_srom(struct nic *nic);
241 static void dmfe_program_DM9801(struct nic *nic, int);
242 static void dmfe_program_DM9802(struct nic *nic);
243
dmfe_reset(struct nic * nic)244 static void dmfe_reset(struct nic *nic)
245 {
246 /* system variable init */
247 db->cr6_data = CR6_DEFAULT | dmfe_cr6_user_set;
248
249 db->NIC_capability = 0xf; /* All capability */
250 db->PHY_reg4 = 0x1e0;
251
252 /* CR6 operation mode decision */
253 if (!chkmode || (db->chip_id == PCI_DM9132_ID) ||
254 (db->chip_revision >= 0x02000030)) {
255 db->cr6_data |= DMFE_TXTH_256;
256 db->cr0_data = CR0_DEFAULT;
257 db->dm910x_chk_mode = 4; /* Enter the normal mode */
258 } else {
259 db->cr6_data |= CR6_SFT; /* Store & Forward mode */
260 db->cr0_data = 0;
261 db->dm910x_chk_mode = 1; /* Enter the check mode */
262 }
263 /* Initilize DM910X board */
264 dmfe_init_dm910x(nic);
265
266 return;
267 }
268
269 /* Initilize DM910X board
270 * Reset DM910X board
271 * Initilize TX/Rx descriptor chain structure
272 * Send the set-up frame
273 * Enable Tx/Rx machine
274 */
275
dmfe_init_dm910x(struct nic * nic)276 static void dmfe_init_dm910x(struct nic *nic)
277 {
278 unsigned long ioaddr = BASE;
279
280 /* Reset DM910x MAC controller */
281 outl(DM910X_RESET, ioaddr + DCR0); /* RESET MAC */
282 udelay(100);
283 outl(db->cr0_data, ioaddr + DCR0);
284 udelay(5);
285
286 /* Phy addr : DM910(A)2/DM9132/9801, phy address = 1 */
287 db->phy_addr = 1;
288
289 /* Parser SROM and media mode */
290 dmfe_parse_srom(nic);
291 db->media_mode = dmfe_media_mode;
292
293 /* RESET Phyxcer Chip by GPR port bit 7 */
294 outl(0x180, ioaddr + DCR12); /* Let bit 7 output port */
295 if (db->chip_id == PCI_DM9009_ID) {
296 outl(0x80, ioaddr + DCR12); /* Issue RESET signal */
297 mdelay(300); /* Delay 300 ms */
298 }
299 outl(0x0, ioaddr + DCR12); /* Clear RESET signal */
300
301 /* Process Phyxcer Media Mode */
302 if (!(db->media_mode & 0x10)) /* Force 1M mode */
303 dmfe_set_phyxcer(nic);
304
305 /* Media Mode Process */
306 if (!(db->media_mode & DMFE_AUTO))
307 db->op_mode = db->media_mode; /* Force Mode */
308
309 /* Initiliaze Transmit/Receive decriptor and CR3/4 */
310 dmfe_descriptor_init(nic, ioaddr);
311
312 /* tx descriptor start pointer */
313 outl(virt_to_le32desc(&txd[0]), ioaddr + DCR4); /* TX DESC address */
314
315 /* rx descriptor start pointer */
316 outl(virt_to_le32desc(&rxd[0]), ioaddr + DCR3); /* RX DESC address */
317
318 /* Init CR6 to program DM910x operation */
319 update_cr6(db->cr6_data, ioaddr);
320
321 /* Send setup frame */
322 if (db->chip_id == PCI_DM9132_ID) {
323 dm9132_id_table(nic); /* DM9132 */
324 } else {
325 send_filter_frame(nic); /* DM9102/DM9102A */
326 }
327
328 /* Init CR7, interrupt active bit */
329 db->cr7_data = CR7_DEFAULT;
330 outl(db->cr7_data, ioaddr + DCR7);
331 /* Init CR15, Tx jabber and Rx watchdog timer */
332 outl(db->cr15_data, ioaddr + DCR15);
333 /* Enable DM910X Tx/Rx function */
334 db->cr6_data |= CR6_RXSC | CR6_TXSC | 0x40000;
335 update_cr6(db->cr6_data, ioaddr);
336 }
337 #ifdef EDEBUG
338 void hex_dump(const char *data, const unsigned int len);
339 #endif
340 /**************************************************************************
341 POLL - Wait for a frame
342 ***************************************************************************/
dmfe_poll(struct nic * nic,int retrieve)343 static int dmfe_poll(struct nic *nic, int retrieve)
344 {
345 u32 rdes0;
346 int entry = db->cur_rx % RX_DESC_CNT;
347 int rxlen;
348 rdes0 = le32_to_cpu(rxd[entry].rdes0);
349 if (rdes0 & 0x80000000)
350 return 0;
351
352 if (!retrieve)
353 return 1;
354
355 if ((rdes0 & 0x300) != 0x300) {
356 /* A packet without First/Last flag */
357 printf("strange Packet\n");
358 rxd[entry].rdes0 = cpu_to_le32(0x80000000);
359 return 0;
360 } else {
361 /* A packet with First/Last flag */
362 rxlen = ((rdes0 >> 16) & 0x3fff) - 4;
363 /* error summary bit check */
364 if (rdes0 & 0x8000) {
365 printf("Error\n");
366 return 0;
367 }
368 if (!(rdes0 & 0x8000) ||
369 ((db->cr6_data & CR6_PM) && (rxlen > 6))) {
370 if (db->dm910x_chk_mode & 1)
371 printf("Silly check mode\n");
372
373 nic->packetlen = rxlen;
374 memcpy(nic->packet, rxb + (entry * RX_ALLOC_SIZE),
375 nic->packetlen);
376 }
377 }
378 rxd[entry].rdes0 = cpu_to_le32(0x80000000);
379 db->cur_rx++;
380 return 1;
381 }
382
dmfe_irq(struct nic * nic __unused,irq_action_t action __unused)383 static void dmfe_irq(struct nic *nic __unused, irq_action_t action __unused)
384 {
385 switch ( action ) {
386 case DISABLE :
387 break;
388 case ENABLE :
389 break;
390 case FORCE :
391 break;
392 }
393 }
394
395 /**************************************************************************
396 TRANSMIT - Transmit a frame
397 ***************************************************************************/
dmfe_transmit(struct nic * nic,const char * dest,unsigned int type,unsigned int size,const char * packet)398 static void dmfe_transmit(struct nic *nic,
399 const char *dest, /* Destination */
400 unsigned int type, /* Type */
401 unsigned int size, /* size */
402 const char *packet) /* Packet */
403 {
404 u16 nstype;
405 u8 *ptxb;
406
407 ptxb = &txb[db->cur_tx];
408
409 /* Stop Tx */
410 outl(0, BASE + DCR7);
411 memcpy(ptxb, dest, ETH_ALEN);
412 memcpy(ptxb + ETH_ALEN, nic->node_addr, ETH_ALEN);
413 nstype = htons((u16) type);
414 memcpy(ptxb + 2 * ETH_ALEN, (u8 *) & nstype, 2);
415 memcpy(ptxb + ETH_HLEN, packet, size);
416
417 size += ETH_HLEN;
418 while (size < ETH_ZLEN)
419 ptxb[size++] = '\0';
420
421 /* setup the transmit descriptor */
422 txd[db->cur_tx].tdes1 = cpu_to_le32(0xe1000000 | size);
423 txd[db->cur_tx].tdes0 = cpu_to_le32(0x80000000); /* give ownership to device */
424
425 /* immediate transmit demand */
426 outl(0x1, BASE + DCR1);
427 outl(db->cr7_data, BASE + DCR7);
428
429 /* Point to next TX descriptor */
430 db->cur_tx++;
431 db->cur_tx = db->cur_tx % TX_DESC_CNT;
432 }
433
434 /**************************************************************************
435 DISABLE - Turn off ethernet interface
436 ***************************************************************************/
dmfe_disable(struct nic * nic __unused)437 static void dmfe_disable ( struct nic *nic __unused ) {
438 /* Reset & stop DM910X board */
439 outl(DM910X_RESET, BASE + DCR0);
440 udelay(5);
441 phy_write(BASE, db->phy_addr, 0, 0x8000, db->chip_id);
442
443 }
444
445 /**************************************************************************
446 PROBE - Look for an adapter, this routine's visible to the outside
447 ***************************************************************************/
448
449 #define board_found 1
450 #define valid_link 0
dmfe_probe(struct nic * nic,struct pci_device * pci)451 static int dmfe_probe ( struct nic *nic, struct pci_device *pci ) {
452
453 uint32_t dev_rev, pci_pmr;
454 int i;
455
456 if (pci->ioaddr == 0)
457 return 0;
458
459 BASE = pci->ioaddr;
460 printf("dmfe.c: Found %s Vendor=0x%hX Device=0x%hX\n",
461 pci->driver_name, pci->vendor, pci->device);
462
463 /* Read Chip revision */
464 pci_read_config_dword(pci, PCI_REVISION_ID, &dev_rev);
465 dprintf(("Revision %lX\n", dev_rev));
466
467 /* point to private storage */
468 db = &dfx;
469
470 db->chip_id = ((u32) pci->device << 16) | pci->vendor;
471 BASE = pci_bar_start(pci, PCI_BASE_ADDRESS_0);
472 db->chip_revision = dev_rev;
473
474 pci_read_config_dword(pci, 0x50, &pci_pmr);
475 pci_pmr &= 0x70000;
476 if ((pci_pmr == 0x10000) && (dev_rev == 0x02000031))
477 db->chip_type = 1; /* DM9102A E3 */
478 else
479 db->chip_type = 0;
480
481 dprintf(("Chip type : %d\n", db->chip_type));
482
483 /* read 64 word srom data */
484 for (i = 0; i < 64; i++)
485 ((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(BASE, i));
486
487 /* Set Node address */
488 for (i = 0; i < 6; i++)
489 nic->node_addr[i] = db->srom[20 + i];
490
491 /* Print out some hardware info */
492 DBG ( "%s: %s at ioaddr %4.4lx\n", pci->driver_name, eth_ntoa ( nic->node_addr ), BASE );
493
494 /* Set the card as PCI Bus Master */
495 adjust_pci_device(pci);
496
497 dmfe_reset(nic);
498
499 nic->irqno = 0;
500 nic->ioaddr = pci->ioaddr;
501
502 /* point to NIC specific routines */
503 nic->nic_op = &dmfe_operations;
504
505 return 1;
506 }
507
508 /*
509 * Initialize transmit/Receive descriptor
510 * Using Chain structure, and allocate Tx/Rx buffer
511 */
512
dmfe_descriptor_init(struct nic * nic __unused,unsigned long ioaddr)513 static void dmfe_descriptor_init(struct nic *nic __unused, unsigned long ioaddr)
514 {
515 int i;
516 db->cur_tx = 0;
517 db->cur_rx = 0;
518
519 /* tx descriptor start pointer */
520 outl(virt_to_le32desc(&txd[0]), ioaddr + DCR4); /* TX DESC address */
521
522 /* rx descriptor start pointer */
523 outl(virt_to_le32desc(&rxd[0]), ioaddr + DCR3); /* RX DESC address */
524
525 /* Init Transmit chain */
526 for (i = 0; i < TX_DESC_CNT; i++) {
527 txd[i].tx_buf_ptr = &txb[i];
528 txd[i].tdes0 = cpu_to_le32(0);
529 txd[i].tdes1 = cpu_to_le32(0x81000000); /* IC, chain */
530 txd[i].tdes2 = cpu_to_le32(virt_to_bus(&txb[i]));
531 txd[i].tdes3 = cpu_to_le32(virt_to_bus(&txd[i + 1]));
532 txd[i].next_tx_desc = &txd[i + 1];
533 }
534 /* Mark the last entry as wrapping the ring */
535 txd[i - 1].tdes3 = virt_to_le32desc(&txd[0]);
536 txd[i - 1].next_tx_desc = &txd[0];
537
538 /* receive descriptor chain */
539 for (i = 0; i < RX_DESC_CNT; i++) {
540 rxd[i].rx_skb_ptr = &rxb[i * RX_ALLOC_SIZE];
541 rxd[i].rdes0 = cpu_to_le32(0x80000000);
542 rxd[i].rdes1 = cpu_to_le32(0x01000600);
543 rxd[i].rdes2 =
544 cpu_to_le32(virt_to_bus(&rxb[i * RX_ALLOC_SIZE]));
545 rxd[i].rdes3 = cpu_to_le32(virt_to_bus(&rxd[i + 1]));
546 rxd[i].next_rx_desc = &rxd[i + 1];
547 }
548 /* Mark the last entry as wrapping the ring */
549 rxd[i - 1].rdes3 = cpu_to_le32(virt_to_bus(&rxd[0]));
550 rxd[i - 1].next_rx_desc = &rxd[0];
551
552 }
553
554 /*
555 * Update CR6 value
556 * Firstly stop DM910X , then written value and start
557 */
558
update_cr6(u32 cr6_data,unsigned long ioaddr)559 static void update_cr6(u32 cr6_data, unsigned long ioaddr)
560 {
561 u32 cr6_tmp;
562
563 cr6_tmp = cr6_data & ~0x2002; /* stop Tx/Rx */
564 outl(cr6_tmp, ioaddr + DCR6);
565 udelay(5);
566 outl(cr6_data, ioaddr + DCR6);
567 udelay(5);
568 }
569
570
571 /*
572 * Send a setup frame for DM9132
573 * This setup frame initilize DM910X addres filter mode
574 */
575
dm9132_id_table(struct nic * nic __unused)576 static void dm9132_id_table(struct nic *nic __unused)
577 {
578 #ifdef LINUX
579 u16 *addrptr;
580 u8 dmi_addr[8];
581 unsigned long ioaddr = BASE + 0xc0; /* ID Table */
582 u32 hash_val;
583 u16 i, hash_table[4];
584 #endif
585 dprintf(("dm9132_id_table\n"));
586
587 printf("FIXME: This function is broken. If you have this card contact "
588 "Timothy Legge at the etherboot-user list\n");
589
590 #ifdef LINUX
591 //DMFE_DBUG(0, "dm9132_id_table()", 0);
592
593 /* Node address */
594 addrptr = (u16 *) nic->node_addr;
595 outw(addrptr[0], ioaddr);
596 ioaddr += 4;
597 outw(addrptr[1], ioaddr);
598 ioaddr += 4;
599 outw(addrptr[2], ioaddr);
600 ioaddr += 4;
601
602 /* Clear Hash Table */
603 for (i = 0; i < 4; i++)
604 hash_table[i] = 0x0;
605
606 /* broadcast address */
607 hash_table[3] = 0x8000;
608
609 /* the multicast address in Hash Table : 64 bits */
610 for (mcptr = mc_list, i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
611 hash_val = cal_CRC((char *) mcptr->dmi_addr, 6, 0) & 0x3f;
612 hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16);
613 }
614
615 /* Write the hash table to MAC MD table */
616 for (i = 0; i < 4; i++, ioaddr += 4)
617 outw(hash_table[i], ioaddr);
618 #endif
619 }
620
621
622 /*
623 * Send a setup frame for DM9102/DM9102A
624 * This setup frame initilize DM910X addres filter mode
625 */
626
send_filter_frame(struct nic * nic)627 static void send_filter_frame(struct nic *nic)
628 {
629
630 u8 *ptxb;
631 int i;
632
633 dprintf(("send_filter_frame\n"));
634 /* point to the current txb incase multiple tx_rings are used */
635 ptxb = &txb[db->cur_tx];
636
637 /* construct perfect filter frame with mac address as first match
638 and broadcast address for all others */
639 for (i = 0; i < 192; i++)
640 ptxb[i] = 0xFF;
641 ptxb[0] = nic->node_addr[0];
642 ptxb[1] = nic->node_addr[1];
643 ptxb[4] = nic->node_addr[2];
644 ptxb[5] = nic->node_addr[3];
645 ptxb[8] = nic->node_addr[4];
646 ptxb[9] = nic->node_addr[5];
647
648 /* prepare the setup frame */
649 txd[db->cur_tx].tdes1 = cpu_to_le32(0x890000c0);
650 txd[db->cur_tx].tdes0 = cpu_to_le32(0x80000000);
651 update_cr6(db->cr6_data | 0x2000, BASE);
652 outl(0x1, BASE + DCR1); /* Issue Tx polling */
653 update_cr6(db->cr6_data, BASE);
654 db->cur_tx++;
655 }
656
657 /*
658 * Read one word data from the serial ROM
659 */
660
read_srom_word(long ioaddr,int offset)661 static u16 read_srom_word(long ioaddr, int offset)
662 {
663 int i;
664 u16 srom_data = 0;
665 long cr9_ioaddr = ioaddr + DCR9;
666
667 outl(CR9_SROM_READ, cr9_ioaddr);
668 outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
669
670 /* Send the Read Command 110b */
671 SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
672 SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
673 SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr);
674
675 /* Send the offset */
676 for (i = 5; i >= 0; i--) {
677 srom_data =
678 (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0;
679 SROM_CLK_WRITE(srom_data, cr9_ioaddr);
680 }
681
682 outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
683
684 for (i = 16; i > 0; i--) {
685 outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr);
686 udelay(5);
687 srom_data =
688 (srom_data << 1) | ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1
689 : 0);
690 outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
691 udelay(5);
692 }
693
694 outl(CR9_SROM_READ, cr9_ioaddr);
695 return srom_data;
696 }
697
698
699 /*
700 * Auto sense the media mode
701 */
702
703 #if 0 /* not used */
704 static u8 dmfe_sense_speed(struct nic *nic __unused)
705 {
706 u8 ErrFlag = 0;
707 u16 phy_mode;
708
709 /* CR6 bit18=0, select 10/100M */
710 update_cr6((db->cr6_data & ~0x40000), BASE);
711
712 phy_mode = phy_read(BASE, db->phy_addr, 1, db->chip_id);
713 phy_mode = phy_read(BASE, db->phy_addr, 1, db->chip_id);
714
715 if ((phy_mode & 0x24) == 0x24) {
716 if (db->chip_id == PCI_DM9132_ID) /* DM9132 */
717 phy_mode =
718 phy_read(BASE, db->phy_addr, 7,
719 db->chip_id) & 0xf000;
720 else /* DM9102/DM9102A */
721 phy_mode =
722 phy_read(BASE, db->phy_addr, 17,
723 db->chip_id) & 0xf000;
724 /* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */
725 switch (phy_mode) {
726 case 0x1000:
727 db->op_mode = DMFE_10MHF;
728 break;
729 case 0x2000:
730 db->op_mode = DMFE_10MFD;
731 break;
732 case 0x4000:
733 db->op_mode = DMFE_100MHF;
734 break;
735 case 0x8000:
736 db->op_mode = DMFE_100MFD;
737 break;
738 default:
739 db->op_mode = DMFE_10MHF;
740 ErrFlag = 1;
741 break;
742 }
743 } else {
744 db->op_mode = DMFE_10MHF;
745 //DMFE_DBUG(0, "Link Failed :", phy_mode);
746 ErrFlag = 1;
747 }
748
749 return ErrFlag;
750 }
751 #endif
752
753 /*
754 * Set 10/100 phyxcer capability
755 * AUTO mode : phyxcer register4 is NIC capability
756 * Force mode: phyxcer register4 is the force media
757 */
758
dmfe_set_phyxcer(struct nic * nic __unused)759 static void dmfe_set_phyxcer(struct nic *nic __unused)
760 {
761 u16 phy_reg;
762
763 /* Select 10/100M phyxcer */
764 db->cr6_data &= ~0x40000;
765 update_cr6(db->cr6_data, BASE);
766
767 /* DM9009 Chip: Phyxcer reg18 bit12=0 */
768 if (db->chip_id == PCI_DM9009_ID) {
769 phy_reg =
770 phy_read(BASE, db->phy_addr, 18,
771 db->chip_id) & ~0x1000;
772 phy_write(BASE, db->phy_addr, 18, phy_reg, db->chip_id);
773 }
774
775 /* Phyxcer capability setting */
776 phy_reg = phy_read(BASE, db->phy_addr, 4, db->chip_id) & ~0x01e0;
777
778 if (db->media_mode & DMFE_AUTO) {
779 /* AUTO Mode */
780 phy_reg |= db->PHY_reg4;
781 } else {
782 /* Force Mode */
783 switch (db->media_mode) {
784 case DMFE_10MHF:
785 phy_reg |= 0x20;
786 break;
787 case DMFE_10MFD:
788 phy_reg |= 0x40;
789 break;
790 case DMFE_100MHF:
791 phy_reg |= 0x80;
792 break;
793 case DMFE_100MFD:
794 phy_reg |= 0x100;
795 break;
796 }
797 if (db->chip_id == PCI_DM9009_ID)
798 phy_reg &= 0x61;
799 }
800
801 /* Write new capability to Phyxcer Reg4 */
802 if (!(phy_reg & 0x01e0)) {
803 phy_reg |= db->PHY_reg4;
804 db->media_mode |= DMFE_AUTO;
805 }
806 phy_write(BASE, db->phy_addr, 4, phy_reg, db->chip_id);
807
808 /* Restart Auto-Negotiation */
809 if (db->chip_type && (db->chip_id == PCI_DM9102_ID))
810 phy_write(BASE, db->phy_addr, 0, 0x1800, db->chip_id);
811 if (!db->chip_type)
812 phy_write(BASE, db->phy_addr, 0, 0x1200, db->chip_id);
813 }
814
815
816 /*
817 * Process op-mode
818 * AUTO mode : PHY controller in Auto-negotiation Mode
819 * Force mode: PHY controller in force mode with HUB
820 * N-way force capability with SWITCH
821 */
822
823 #if 0 /* not used */
824 static void dmfe_process_mode(struct nic *nic __unused)
825 {
826 u16 phy_reg;
827
828 /* Full Duplex Mode Check */
829 if (db->op_mode & 0x4)
830 db->cr6_data |= CR6_FDM; /* Set Full Duplex Bit */
831 else
832 db->cr6_data &= ~CR6_FDM; /* Clear Full Duplex Bit */
833
834 /* Transciver Selection */
835 if (db->op_mode & 0x10) /* 1M HomePNA */
836 db->cr6_data |= 0x40000; /* External MII select */
837 else
838 db->cr6_data &= ~0x40000; /* Internal 10/100 transciver */
839
840 update_cr6(db->cr6_data, BASE);
841
842 /* 10/100M phyxcer force mode need */
843 if (!(db->media_mode & 0x18)) {
844 /* Forece Mode */
845 phy_reg = phy_read(BASE, db->phy_addr, 6, db->chip_id);
846 if (!(phy_reg & 0x1)) {
847 /* parter without N-Way capability */
848 phy_reg = 0x0;
849 switch (db->op_mode) {
850 case DMFE_10MHF:
851 phy_reg = 0x0;
852 break;
853 case DMFE_10MFD:
854 phy_reg = 0x100;
855 break;
856 case DMFE_100MHF:
857 phy_reg = 0x2000;
858 break;
859 case DMFE_100MFD:
860 phy_reg = 0x2100;
861 break;
862 }
863 phy_write(BASE, db->phy_addr, 0, phy_reg,
864 db->chip_id);
865 if (db->chip_type
866 && (db->chip_id == PCI_DM9102_ID))
867 mdelay(20);
868 phy_write(BASE, db->phy_addr, 0, phy_reg,
869 db->chip_id);
870 }
871 }
872 }
873 #endif
874
875 /*
876 * Write a word to Phy register
877 */
878
phy_write(unsigned long iobase,u8 phy_addr,u8 offset,u16 phy_data,u32 chip_id)879 static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset,
880 u16 phy_data, u32 chip_id)
881 {
882 u16 i;
883 unsigned long ioaddr;
884
885 if (chip_id == PCI_DM9132_ID) {
886 ioaddr = iobase + 0x80 + offset * 4;
887 outw(phy_data, ioaddr);
888 } else {
889 /* DM9102/DM9102A Chip */
890 ioaddr = iobase + DCR9;
891
892 /* Send 33 synchronization clock to Phy controller */
893 for (i = 0; i < 35; i++)
894 phy_write_1bit(ioaddr, PHY_DATA_1);
895
896 /* Send start command(01) to Phy */
897 phy_write_1bit(ioaddr, PHY_DATA_0);
898 phy_write_1bit(ioaddr, PHY_DATA_1);
899
900 /* Send write command(01) to Phy */
901 phy_write_1bit(ioaddr, PHY_DATA_0);
902 phy_write_1bit(ioaddr, PHY_DATA_1);
903
904 /* Send Phy addres */
905 for (i = 0x10; i > 0; i = i >> 1)
906 phy_write_1bit(ioaddr,
907 phy_addr & i ? PHY_DATA_1 :
908 PHY_DATA_0);
909
910 /* Send register addres */
911 for (i = 0x10; i > 0; i = i >> 1)
912 phy_write_1bit(ioaddr,
913 offset & i ? PHY_DATA_1 :
914 PHY_DATA_0);
915
916 /* written trasnition */
917 phy_write_1bit(ioaddr, PHY_DATA_1);
918 phy_write_1bit(ioaddr, PHY_DATA_0);
919
920 /* Write a word data to PHY controller */
921 for (i = 0x8000; i > 0; i >>= 1)
922 phy_write_1bit(ioaddr,
923 phy_data & i ? PHY_DATA_1 :
924 PHY_DATA_0);
925 }
926 }
927
928
929 /*
930 * Read a word data from phy register
931 */
932
phy_read(unsigned long iobase,u8 phy_addr,u8 offset,u32 chip_id)933 static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset,
934 u32 chip_id)
935 {
936 int i;
937 u16 phy_data;
938 unsigned long ioaddr;
939
940 if (chip_id == PCI_DM9132_ID) {
941 /* DM9132 Chip */
942 ioaddr = iobase + 0x80 + offset * 4;
943 phy_data = inw(ioaddr);
944 } else {
945 /* DM9102/DM9102A Chip */
946 ioaddr = iobase + DCR9;
947
948 /* Send 33 synchronization clock to Phy controller */
949 for (i = 0; i < 35; i++)
950 phy_write_1bit(ioaddr, PHY_DATA_1);
951
952 /* Send start command(01) to Phy */
953 phy_write_1bit(ioaddr, PHY_DATA_0);
954 phy_write_1bit(ioaddr, PHY_DATA_1);
955
956 /* Send read command(10) to Phy */
957 phy_write_1bit(ioaddr, PHY_DATA_1);
958 phy_write_1bit(ioaddr, PHY_DATA_0);
959
960 /* Send Phy addres */
961 for (i = 0x10; i > 0; i = i >> 1)
962 phy_write_1bit(ioaddr,
963 phy_addr & i ? PHY_DATA_1 :
964 PHY_DATA_0);
965
966 /* Send register addres */
967 for (i = 0x10; i > 0; i = i >> 1)
968 phy_write_1bit(ioaddr,
969 offset & i ? PHY_DATA_1 :
970 PHY_DATA_0);
971
972 /* Skip transition state */
973 phy_read_1bit(ioaddr);
974
975 /* read 16bit data */
976 for (phy_data = 0, i = 0; i < 16; i++) {
977 phy_data <<= 1;
978 phy_data |= phy_read_1bit(ioaddr);
979 }
980 }
981
982 return phy_data;
983 }
984
985
986 /*
987 * Write one bit data to Phy Controller
988 */
989
phy_write_1bit(unsigned long ioaddr,u32 phy_data)990 static void phy_write_1bit(unsigned long ioaddr, u32 phy_data)
991 {
992 outl(phy_data, ioaddr); /* MII Clock Low */
993 udelay(1);
994 outl(phy_data | MDCLKH, ioaddr); /* MII Clock High */
995 udelay(1);
996 outl(phy_data, ioaddr); /* MII Clock Low */
997 udelay(1);
998 }
999
1000
1001 /*
1002 * Read one bit phy data from PHY controller
1003 */
1004
phy_read_1bit(unsigned long ioaddr)1005 static u16 phy_read_1bit(unsigned long ioaddr)
1006 {
1007 u16 phy_data;
1008
1009 outl(0x50000, ioaddr);
1010 udelay(1);
1011 phy_data = (inl(ioaddr) >> 19) & 0x1;
1012 outl(0x40000, ioaddr);
1013 udelay(1);
1014
1015 return phy_data;
1016 }
1017
1018
1019 /*
1020 * Parser SROM and media mode
1021 */
1022
dmfe_parse_srom(struct nic * nic)1023 static void dmfe_parse_srom(struct nic *nic)
1024 {
1025 unsigned char *srom = db->srom;
1026 int dmfe_mode, tmp_reg;
1027
1028 /* Init CR15 */
1029 db->cr15_data = CR15_DEFAULT;
1030
1031 /* Check SROM Version */
1032 if (((int) srom[18] & 0xff) == SROM_V41_CODE) {
1033 /* SROM V4.01 */
1034 /* Get NIC support media mode */
1035 db->NIC_capability = *(u16 *) (srom + 34);
1036 db->PHY_reg4 = 0;
1037 for (tmp_reg = 1; tmp_reg < 0x10; tmp_reg <<= 1) {
1038 switch (db->NIC_capability & tmp_reg) {
1039 case 0x1:
1040 db->PHY_reg4 |= 0x0020;
1041 break;
1042 case 0x2:
1043 db->PHY_reg4 |= 0x0040;
1044 break;
1045 case 0x4:
1046 db->PHY_reg4 |= 0x0080;
1047 break;
1048 case 0x8:
1049 db->PHY_reg4 |= 0x0100;
1050 break;
1051 }
1052 }
1053
1054 /* Media Mode Force or not check */
1055 dmfe_mode = *((int *) srom + 34) & *((int *) srom + 36);
1056 switch (dmfe_mode) {
1057 case 0x4:
1058 dmfe_media_mode = DMFE_100MHF;
1059 break; /* 100MHF */
1060 case 0x2:
1061 dmfe_media_mode = DMFE_10MFD;
1062 break; /* 10MFD */
1063 case 0x8:
1064 dmfe_media_mode = DMFE_100MFD;
1065 break; /* 100MFD */
1066 case 0x100:
1067 case 0x200:
1068 dmfe_media_mode = DMFE_1M_HPNA;
1069 break; /* HomePNA */
1070 }
1071
1072 /* Special Function setting */
1073 /* VLAN function */
1074 if ((SF_mode & 0x1) || (srom[43] & 0x80))
1075 db->cr15_data |= 0x40;
1076
1077 /* Flow Control */
1078 if ((SF_mode & 0x2) || (srom[40] & 0x1))
1079 db->cr15_data |= 0x400;
1080
1081 /* TX pause packet */
1082 if ((SF_mode & 0x4) || (srom[40] & 0xe))
1083 db->cr15_data |= 0x9800;
1084 }
1085
1086 /* Parse HPNA parameter */
1087 db->HPNA_command = 1;
1088
1089 /* Accept remote command or not */
1090 if (HPNA_rx_cmd == 0)
1091 db->HPNA_command |= 0x8000;
1092
1093 /* Issue remote command & operation mode */
1094 if (HPNA_tx_cmd == 1)
1095 switch (HPNA_mode) { /* Issue Remote Command */
1096 case 0:
1097 db->HPNA_command |= 0x0904;
1098 break;
1099 case 1:
1100 db->HPNA_command |= 0x0a00;
1101 break;
1102 case 2:
1103 db->HPNA_command |= 0x0506;
1104 break;
1105 case 3:
1106 db->HPNA_command |= 0x0602;
1107 break;
1108 } else
1109 switch (HPNA_mode) { /* Don't Issue */
1110 case 0:
1111 db->HPNA_command |= 0x0004;
1112 break;
1113 case 1:
1114 db->HPNA_command |= 0x0000;
1115 break;
1116 case 2:
1117 db->HPNA_command |= 0x0006;
1118 break;
1119 case 3:
1120 db->HPNA_command |= 0x0002;
1121 break;
1122 }
1123
1124 /* Check DM9801 or DM9802 present or not */
1125 db->HPNA_present = 0;
1126 update_cr6(db->cr6_data | 0x40000, BASE);
1127 tmp_reg = phy_read(BASE, db->phy_addr, 3, db->chip_id);
1128 if ((tmp_reg & 0xfff0) == 0xb900) {
1129 /* DM9801 or DM9802 present */
1130 db->HPNA_timer = 8;
1131 if (phy_read(BASE, db->phy_addr, 31, db->chip_id) ==
1132 0x4404) {
1133 /* DM9801 HomeRun */
1134 db->HPNA_present = 1;
1135 dmfe_program_DM9801(nic, tmp_reg);
1136 } else {
1137 /* DM9802 LongRun */
1138 db->HPNA_present = 2;
1139 dmfe_program_DM9802(nic);
1140 }
1141 }
1142
1143 }
1144
1145 /*
1146 * Init HomeRun DM9801
1147 */
1148
dmfe_program_DM9801(struct nic * nic __unused,int HPNA_rev)1149 static void dmfe_program_DM9801(struct nic *nic __unused, int HPNA_rev)
1150 {
1151 u32 reg17, reg25;
1152
1153 if (!HPNA_NoiseFloor)
1154 HPNA_NoiseFloor = DM9801_NOISE_FLOOR;
1155 switch (HPNA_rev) {
1156 case 0xb900: /* DM9801 E3 */
1157 db->HPNA_command |= 0x1000;
1158 reg25 = phy_read(BASE, db->phy_addr, 24, db->chip_id);
1159 reg25 = ((reg25 + HPNA_NoiseFloor) & 0xff) | 0xf000;
1160 reg17 = phy_read(BASE, db->phy_addr, 17, db->chip_id);
1161 break;
1162 case 0xb901: /* DM9801 E4 */
1163 reg25 = phy_read(BASE, db->phy_addr, 25, db->chip_id);
1164 reg25 = (reg25 & 0xff00) + HPNA_NoiseFloor;
1165 reg17 = phy_read(BASE, db->phy_addr, 17, db->chip_id);
1166 reg17 = (reg17 & 0xfff0) + HPNA_NoiseFloor + 3;
1167 break;
1168 case 0xb902: /* DM9801 E5 */
1169 case 0xb903: /* DM9801 E6 */
1170 default:
1171 db->HPNA_command |= 0x1000;
1172 reg25 = phy_read(BASE, db->phy_addr, 25, db->chip_id);
1173 reg25 = (reg25 & 0xff00) + HPNA_NoiseFloor - 5;
1174 reg17 = phy_read(BASE, db->phy_addr, 17, db->chip_id);
1175 reg17 = (reg17 & 0xfff0) + HPNA_NoiseFloor;
1176 break;
1177 }
1178 phy_write(BASE, db->phy_addr, 16, db->HPNA_command, db->chip_id);
1179 phy_write(BASE, db->phy_addr, 17, reg17, db->chip_id);
1180 phy_write(BASE, db->phy_addr, 25, reg25, db->chip_id);
1181 }
1182
1183
1184 /*
1185 * Init HomeRun DM9802
1186 */
1187
dmfe_program_DM9802(struct nic * nic __unused)1188 static void dmfe_program_DM9802(struct nic *nic __unused)
1189 {
1190 u32 phy_reg;
1191
1192 if (!HPNA_NoiseFloor)
1193 HPNA_NoiseFloor = DM9802_NOISE_FLOOR;
1194 phy_write(BASE, db->phy_addr, 16, db->HPNA_command, db->chip_id);
1195 phy_reg = phy_read(BASE, db->phy_addr, 25, db->chip_id);
1196 phy_reg = (phy_reg & 0xff00) + HPNA_NoiseFloor;
1197 phy_write(BASE, db->phy_addr, 25, phy_reg, db->chip_id);
1198 }
1199
1200 static struct nic_operations dmfe_operations = {
1201 .connect = dummy_connect,
1202 .poll = dmfe_poll,
1203 .transmit = dmfe_transmit,
1204 .irq = dmfe_irq,
1205
1206 };
1207
1208 static struct pci_device_id dmfe_nics[] = {
1209 PCI_ROM(0x1282, 0x9100, "dmfe9100", "Davicom 9100", 0),
1210 PCI_ROM(0x1282, 0x9102, "dmfe9102", "Davicom 9102", 0),
1211 PCI_ROM(0x1282, 0x9009, "dmfe9009", "Davicom 9009", 0),
1212 PCI_ROM(0x1282, 0x9132, "dmfe9132", "Davicom 9132", 0), /* Needs probably some fixing */
1213 };
1214
1215 PCI_DRIVER ( dmfe_driver, dmfe_nics, PCI_NO_CLASS );
1216
1217 DRIVER ( "DMFE/PCI", nic_driver, pci_driver, dmfe_driver,
1218 dmfe_probe, dmfe_disable );
1219
1220 /*
1221 * Local variables:
1222 * c-basic-offset: 8
1223 * c-indent-level: 8
1224 * tab-width: 8
1225 * End:
1226 */
1227