xref: /external/valgrind/callgrind/docs/cl-manual.xml

<?xml version="1.0"?> <!-- -*- sgml -*- -->
<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
  "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
[ <!ENTITY % vg-entities SYSTEM "../../docs/xml/vg-entities.xml"> %vg-entities; ]>

<chapter id="cl-manual" xreflabel="Callgrind Manual">
<title>Callgrind: a call-graph generating cache and branch prediction profiler</title>


<para>To use this tool, you must specify
<option>--tool=callgrind</option> on the
Valgrind command line.</para>

<sect1 id="cl-manual.use" xreflabel="Overview">
<title>Overview</title>

<para>Callgrind is a profiling tool that records the call history among
functions in a program's run as a call-graph.
By default, the collected data consists of
the number of instructions executed, their relationship
to source lines, the caller/callee relationship between functions,
and the numbers of such calls.
Optionally, cache simulation and/or branch prediction (similar to Cachegrind)
can produce further information about the runtime behavior of an application.
</para>

<para>The profile data is written out to a file at program
termination. For presentation of the data, and interactive control
of the profiling, two command line tools are provided:</para>
<variablelist>
  <varlistentry>
  <term><command>callgrind_annotate</command></term>
  <listitem>
    <para>This command reads in the profile data, and prints a
    sorted lists of functions, optionally with source annotation.</para>

    <para>For graphical visualization of the data, try
    <ulink url="&cl-gui-url;">KCachegrind</ulink>, which is a KDE/Qt based
    GUI that makes it easy to navigate the large amount of data that
    Callgrind produces.</para>

  </listitem>
  </varlistentry>

  <varlistentry>
  <term><command>callgrind_control</command></term>
  <listitem>
    <para>This command enables you to interactively observe and control
    the status of a program currently running under Callgrind's control,
    without stopping the program.  You can get statistics information as
    well as the current stack trace, and you can request zeroing of counters
    or dumping of profile data.</para>
  </listitem>
  </varlistentry>
</variablelist>

  <sect2 id="cl-manual.functionality" xreflabel="Functionality">
  <title>Functionality</title>

<para>Cachegrind collects flat profile data: event counts (data reads,
cache misses, etc.) are attributed directly to the function they
occurred in.  This cost attribution mechanism is
called <emphasis>self</emphasis> or <emphasis>exclusive</emphasis>
attribution.</para>

<para>Callgrind extends this functionality by propagating costs
across function call boundaries.  If function <function>foo</function> calls
<function>bar</function>, the costs from <function>bar</function> are added into
<function>foo</function>'s costs.  When applied to the program as a whole,
this builds up a picture of so called <emphasis>inclusive</emphasis>
costs, that is, where the cost of each function includes the costs of
all functions it called, directly or indirectly.</para>

<para>As an example, the inclusive cost of
<function>main</function> should be almost 100 percent
of the total program cost.  Because of costs arising before
<function>main</function> is run, such as
initialization of the run time linker and construction of global C++
objects, the inclusive cost of <function>main</function>
is not exactly 100 percent of the total program cost.</para>

<para>Together with the call graph, this allows you to find the
specific call chains starting from
<function>main</function> in which the majority of the
program's costs occur.  Caller/callee cost attribution is also useful
for profiling functions called from multiple call sites, and where
optimization opportunities depend on changing code in the callers, in
particular by reducing the call count.</para>

<para>Callgrind's cache simulation is based on that of Cachegrind.
Read the documentation for <xref linkend="&vg-cg-manual-id;"/> first.  The material
below describes the features supported in addition to Cachegrind's
features.</para>

<para>Callgrind's ability to detect function calls and returns depends
on the instruction set of the platform it is run on.  It works best on
x86 and amd64, and unfortunately currently does not work so well on
PowerPC, ARM, Thumb or MIPS code.  This is because there are no explicit
call or return instructions in these instruction sets, so Callgrind
has to rely on heuristics to detect calls and returns.</para>

  </sect2>

  <sect2 id="cl-manual.basics" xreflabel="Basic Usage">
  <title>Basic Usage</title>

  <para>As with Cachegrind, you probably want to compile with debugging info
  (the <option>-g</option> option) and with optimization turned on.</para>

  <para>To start a profile run for a program, execute:
  <screen>valgrind --tool=callgrind [callgrind options] your-program [program options]</screen>
  </para>

  <para>While the simulation is running, you can observe execution with:
  <screen>callgrind_control -b</screen>
  This will print out the current backtrace. To annotate the backtrace with
  event counts, run
  <screen>callgrind_control -e -b</screen>
  </para>

  <para>After program termination, a profile data file named
  <computeroutput>callgrind.out.&lt;pid&gt;</computeroutput>
  is generated, where <emphasis>pid</emphasis> is the process ID
  of the program being profiled.
  The data file contains information about the calls made in the
  program among the functions executed, together with
  <command>Instruction Read</command> (Ir) event counts.</para>

  <para>To generate a function-by-function summary from the profile
  data file, use
  <screen>callgrind_annotate [options] callgrind.out.&lt;pid&gt;</screen>
  This summary is similar to the output you get from a Cachegrind
  run with cg_annotate: the list
  of functions is ordered by exclusive cost of functions, which also
  are the ones that are shown.
  Important for the additional features of Callgrind are
  the following two options:</para>

  <itemizedlist>
    <listitem>
      <para><option>--inclusive=yes</option>: Instead of using
      exclusive cost of functions as sorting order, use and show
      inclusive cost.</para>
    </listitem>

    <listitem>
      <para><option>--tree=both</option>: Interleave into the
      top level list of functions, information on the callers and the callees
      of each function. In these lines, which represents executed
      calls, the cost gives the number of events spent in the call.
      Indented, above each function, there is the list of callers,
      and below, the list of callees. The sum of events in calls to
      a given function (caller lines), as well as the sum of events in
      calls from the function (callee lines) together with the self
      cost, gives the total inclusive cost of the function.</para>
     </listitem>
  </itemizedlist>

  <para>Use <option>--auto=yes</option> to get annotated source code
  for all relevant functions for which the source can be found. In
  addition to source annotation as produced by
  <computeroutput>cg_annotate</computeroutput>, you will see the
  annotated call sites with call counts. For all other options,
  consult the (Cachegrind) documentation for
  <computeroutput>cg_annotate</computeroutput>.
  </para>

  <para>For better call graph browsing experience, it is highly recommended
  to use <ulink url="&cl-gui-url;">KCachegrind</ulink>.
  If your code
  has a significant fraction of its cost in <emphasis>cycles</emphasis> (sets
  of functions calling each other in a recursive manner), you have to
  use KCachegrind, as <computeroutput>callgrind_annotate</computeroutput>
  currently does not do any cycle detection, which is important to get correct
  results in this case.</para>

  <para>If you are additionally interested in measuring the
  cache behavior of your program, use Callgrind with the option
  <option><xref linkend="clopt.cache-sim"/>=yes</option>. For
  branch prediction simulation, use <option><xref linkend="clopt.branch-sim"/>=yes</option>.
  Expect a further slow down approximately by a factor of 2.</para>

  <para>If the program section you want to profile is somewhere in the
  middle of the run, it is beneficial to
  <emphasis>fast forward</emphasis> to this section without any
  profiling, and then enable profiling.  This is achieved by using
  the command line option
  <option><xref linkend="opt.instr-atstart"/>=no</option>
  and running, in a shell:
  <computeroutput>callgrind_control -i on</computeroutput> just before the
  interesting code section is executed. To exactly specify
  the code position where profiling should start, use the client request
  <computeroutput><xref linkend="cr.start-instr"/></computeroutput>.</para>

  <para>If you want to be able to see assembly code level annotation, specify
  <option><xref linkend="opt.dump-instr"/>=yes</option>. This will produce
  profile data at instruction granularity. Note that the resulting profile
  data
  can only be viewed with KCachegrind. For assembly annotation, it also is
  interesting to see more details of the control flow inside of functions,
  i.e. (conditional) jumps. This will be collected by further specifying
  <option><xref linkend="opt.collect-jumps"/>=yes</option>.</para>

  </sect2>

</sect1>

<sect1 id="cl-manual.usage" xreflabel="Advanced Usage">
<title>Advanced Usage</title>

  <sect2 id="cl-manual.dumps"
         xreflabel="Multiple dumps from one program run">
  <title>Multiple profiling dumps from one program run</title>

  <para>Sometimes you are not interested in characteristics of a full
  program run, but only of a small part of it, for example execution of one
  algorithm.  If there are multiple algorithms, or one algorithm
  running with different input data, it may even be useful to get different
  profile information for different parts of a single program run.</para>

  <para>Profile data files have names of the form
<screen>
callgrind.out.<emphasis>pid</emphasis>.<emphasis>part</emphasis>-<emphasis>threadID</emphasis>
</screen>
  </para>
  <para>where <emphasis>pid</emphasis> is the PID of the running
  program, <emphasis>part</emphasis> is a number incremented on each
  dump (".part" is skipped for the dump at program termination), and
  <emphasis>threadID</emphasis> is a thread identification
  ("-threadID" is only used if you request dumps of individual
  threads with <option><xref linkend="opt.separate-threads"/>=yes</option>).</para>

  <para>There are different ways to generate multiple profile dumps
  while a program is running under Callgrind's supervision.  Nevertheless,
  all methods trigger the same action, which is "dump all profile
  information since the last dump or program start, and zero cost
  counters afterwards".  To allow for zeroing cost counters without
  dumping, there is a second action "zero all cost counters now".
  The different methods are:</para>
  <itemizedlist>

    <listitem>
      <para><command>Dump on program termination.</command>
      This method is the standard way and doesn't need any special
      action on your part.</para>
    </listitem>

    <listitem>
      <para><command>Spontaneous, interactive dumping.</command> Use
      <screen>callgrind_control -d [hint [PID/Name]]</screen> to
      request the dumping of profile information of the supervised
      application with PID or Name.  <emphasis>hint</emphasis> is an
      arbitrary string you can optionally specify to later be able to
      distinguish profile dumps.  The control program will not terminate
      before the dump is completely written.  Note that the application
      must be actively running for detection of the dump command. So,
      for a GUI application, resize the window, or for a server, send a
      request.</para>
      <para>If you are using <ulink url="&cl-gui-url;">KCachegrind</ulink>
      for browsing of profile information, you can use the toolbar
      button <command>Force dump</command>. This will request a dump
      and trigger a reload after the dump is written.</para>
    </listitem>

    <listitem>
      <para><command>Periodic dumping after execution of a specified
      number of basic blocks</command>. For this, use the command line
      option <option><xref linkend="opt.dump-every-bb"/>=count</option>.
      </para>
    </listitem>

    <listitem>
      <para><command>Dumping at enter/leave of specified functions.</command>
      Use the
      option <option><xref linkend="opt.dump-before"/>=function</option>
      and <option><xref linkend="opt.dump-after"/>=function</option>.
      To zero cost counters before entering a function, use
      <option><xref linkend="opt.zero-before"/>=function</option>.</para>
      <para>You can specify these options multiple times for different
      functions. Function specifications support wildcards: e.g. use
      <option><xref linkend="opt.dump-before"/>='foo*'</option> to
      generate dumps before entering any function starting with
      <emphasis>foo</emphasis>.</para>
    </listitem>

    <listitem>
      <para><command>Program controlled dumping.</command>
      Insert
      <computeroutput><xref linkend="cr.dump-stats"/>;</computeroutput>
      at the position in your code where you want a profile dump to happen. Use
      <computeroutput><xref linkend="cr.zero-stats"/>;</computeroutput> to only
      zero profile counters.
      See <xref linkend="cl-manual.clientrequests"/> for more information on
      Callgrind specific client requests.</para>
    </listitem>
  </itemizedlist>

  <para>If you are running a multi-threaded application and specify the
  command line option <option><xref linkend="opt.separate-threads"/>=yes</option>,
  every thread will be profiled on its own and will create its own
  profile dump. Thus, the last two methods will only generate one dump
  of the currently running thread. With the other methods, you will get
  multiple dumps (one for each thread) on a dump request.</para>

  </sect2>



  <sect2 id="cl-manual.limits"
         xreflabel="Limiting range of event collection">
  <title>Limiting the range of collected events</title>

  <para>By default, whenever events are happening (such as an
    instruction execution or cache hit/miss), Callgrind is aggregating
    them into event counters. However, you may be interested only in
    what is happening within a given function or starting from a given
    program phase. To this end, you can disable event aggregation for
    uninteresting program parts. While attribution of events to
    functions as well as producing separate output per program phase
    can be done by other means (see previous section), there are two
    benefits by disabling aggregation. First, this is very
    fine-granular (e.g. just for a loop within a function).  Second,
    disabling event aggregation for complete program phases allows to
    switch off time-consuming cache simulation and allows Callgrind to
    progress at much higher speed with an slowdown of around factor 2
    (identical to <computeroutput>valgrind
    --tool=none</computeroutput>).
  </para>

  <para>There are two aspects which influence whether Callgrind is
    aggregating events at some point in time of program execution.
    First, there is the <emphasis>collection state</emphasis>. If this
    is off, no aggregation will be done.  By changing the collection
    state, you can control event aggregation at a very fine
    granularity.  However, there is not much difference in regard to
    execution speed of Callgrind.  By default, collection is switched
    on, but can be disabled by different means (see below).  Second,
    there is the <emphasis>instrumentation mode</emphasis> in which
    Callgrind is running. This mode either can be on or off. If
    instrumentation is off, no observation of actions in the program
    will be done and thus, no actions will be forwarded to the
    simulator which could trigger events. In the end, no events will
    be aggregated.  The huge benefit is the much higher speed with
    instrumentation switched off.  However, this only should be used
    with care and in a coarse fashion: every mode change resets the
    simulator state (ie. whether a memory block is cached or not) and
    flushes Valgrinds internal cache of instrumented code blocks,
    resulting in latency penalty at switching time. Also, cache
    simulator results directly after switching on instrumentation will
    be skewed due to identified cache misses which would not happen in
    reality (if you care about this warm-up effect, you should make
    sure to temporarly have collection state switched off directly
    after turning instrumentation mode on). However, switching
    instrumentation state is very useful to skip larger program phases
    such as an initialization phase. By default, instrumentation is
    switched on, but as with the collection state, can be changed by
    various means.
  </para>

  <para>Callgrind can start with instrumentation mode switched off by
    specifying
    option <option><xref linkend="opt.instr-atstart"/>=no</option>.
    Afterwards, instrumentation can be controlled in two ways: first,
    interactively with: <screen>callgrind_control -i on</screen> (and
    switching off again by specifying "off" instead of "on").  Second,
    instrumentation state can be programatically changed with the
    macros <computeroutput><xref linkend="cr.start-instr"/>;</computeroutput>
    and <computeroutput><xref linkend="cr.stop-instr"/>;</computeroutput>.
  </para>

  <para>Similarly, the collection state at program start can be
    switched off
    by <option><xref linkend="opt.instr-atstart"/>=no</option>. During
    execution, it can be controlled programatically with the
    macro <computeroutput>CALLGRIND_TOGGLE_COLLECT;</computeroutput>.
    Further, you can limit event collection to a specific function by
    using <option><xref linkend="opt.toggle-collect"/>=function</option>.
    This will toggle the collection state on entering and leaving the
    specified function.  When this option is in effect, the default
    collection state at program start is "off".  Only events happening
    while running inside of the given function will be
    collected. Recursive calls of the given function do not trigger
    any action. This option can be given multiple times to specify
    different functions of interest.</para>
  </sect2>

  <sect2 id="cl-manual.busevents" xreflabel="Counting global bus events">
  <title>Counting global bus events</title>

  <para>For access to shared data among threads in a multithreaded
  code, synchronization is required to avoid raced conditions.
  Synchronization primitives are usually implemented via atomic instructions.
  However, excessive use of such instructions can lead to performance
  issues.</para>

  <para>To enable analysis of this problem, Callgrind optionally can count
  the number of atomic instructions executed. More precisely, for x86/x86_64,
  these are instructions using a lock prefix. For architectures supporting
  LL/SC, these are the number of SC instructions executed. For both, the term
  "global bus events" is used.</para>

  <para>The short name of the event type used for global bus events is "Ge".
  To count global bus events, use <option><xref linkend="clopt.collect-bus"/>=yes</option>.
  </para>
  </sect2>

  <sect2 id="cl-manual.cycles" xreflabel="Avoiding cycles">
  <title>Avoiding cycles</title>

  <para>Informally speaking, a cycle is a group of functions which
  call each other in a recursive way.</para>

  <para>Formally speaking, a cycle is a nonempty set S of functions,
  such that for every pair of functions F and G in S, it is possible
  to call from F to G (possibly via intermediate functions) and also
  from G to F.  Furthermore, S must be maximal -- that is, be the
  largest set of functions satisfying this property.  For example, if
  a third function H is called from inside S and calls back into S,
  then H is also part of the cycle and should be included in S.</para>

  <para>Recursion is quite usual in programs, and therefore, cycles
  sometimes appear in the call graph output of Callgrind. However,
  the title of this chapter should raise two questions: What is bad
  about cycles which makes you want to avoid them? And: How can
  cycles be avoided without changing program code?</para>

  <para>Cycles are not bad in itself, but tend to make performance
  analysis of your code harder. This is because inclusive costs
  for calls inside of a cycle are meaningless. The definition of
  inclusive cost, i.e. self cost of a function plus inclusive cost
  of its callees, needs a topological order among functions. For
  cycles, this does not hold true: callees of a function in a cycle include
  the function itself. Therefore, KCachegrind does cycle detection
  and skips visualization of any inclusive cost for calls inside
  of cycles. Further, all functions in a cycle are collapsed into artificial
  functions called like <computeroutput>Cycle 1</computeroutput>.</para>

  <para>Now, when a program exposes really big cycles (as is
  true for some GUI code, or in general code using event or callback based
  programming style), you lose the nice property to let you pinpoint
  the bottlenecks by following call chains from
  <function>main</function>, guided via
  inclusive cost. In addition, KCachegrind loses its ability to show
  interesting parts of the call graph, as it uses inclusive costs to
  cut off uninteresting areas.</para>

  <para>Despite the meaningless of inclusive costs in cycles, the big
  drawback for visualization motivates the possibility to temporarily
  switch off cycle detection in KCachegrind, which can lead to
  misguiding visualization. However, often cycles appear because of
  unlucky superposition of independent call chains in a way that
  the profile result will see a cycle. Neglecting uninteresting
  calls with very small measured inclusive cost would break these
  cycles. In such cases, incorrect handling of cycles by not detecting
  them still gives meaningful profiling visualization.</para>

  <para>It has to be noted that currently, <command>callgrind_annotate</command>
  does not do any cycle detection at all. For program executions with function
  recursion, it e.g. can print nonsense inclusive costs way above 100%.</para>

  <para>After describing why cycles are bad for profiling, it is worth
  talking about cycle avoidance. The key insight here is that symbols in
  the profile data do not have to exactly match the symbols found in the
  program. Instead, the symbol name could encode additional information
  from the current execution context such as recursion level of the
  current function, or even some part of the call chain leading to the
  function. While encoding of additional information into symbols is
  quite capable of avoiding cycles, it has to be used carefully to not cause
  symbol explosion. The latter imposes large memory requirement for Callgrind
  with possible out-of-memory conditions, and big profile data files.</para>

  <para>A further possibility to avoid cycles in Callgrind's profile data
  output is to simply leave out given functions in the call graph. Of course, this
  also skips any call information from and to an ignored function, and thus can
  break a cycle. Candidates for this typically are dispatcher functions in event
  driven code. The option to ignore calls to a function is
  <option><xref linkend="opt.fn-skip"/>=function</option>. Aside from
  possibly breaking cycles, this is used in Callgrind to skip
  trampoline functions in the PLT sections
  for calls to functions in shared libraries. You can see the difference
  if you profile with <option><xref linkend="opt.skip-plt"/>=no</option>.
  If a call is ignored, its cost events will be propagated to the
  enclosing function.</para>

  <para>If you have a recursive function, you can distinguish the first
  10 recursion levels by specifying
  <option><xref linkend="opt.separate-recs-num"/>=function</option>.
  Or for all functions with
  <option><xref linkend="opt.separate-recs"/>=10</option>, but this will
  give you much bigger profile data files.  In the profile data, you will see
  the recursion levels of "func" as the different functions with names
  "func", "func'2", "func'3" and so on.</para>

  <para>If you have call chains "A &gt; B &gt; C" and "A &gt; C &gt; B"
  in your program, you usually get a "false" cycle "B &lt;&gt; C". Use
  <option><xref linkend="opt.separate-callers-num"/>=B</option>
  <option><xref linkend="opt.separate-callers-num"/>=C</option>,
  and functions "B" and "C" will be treated as different functions
  depending on the direct caller. Using the apostrophe for appending
  this "context" to the function name, you get "A &gt; B'A &gt; C'B"
  and "A &gt; C'A &gt; B'C", and there will be no cycle. Use
  <option><xref linkend="opt.separate-callers"/>=2</option> to get a 2-caller
  dependency for all functions.  Note that doing this will increase
  the size of profile data files.</para>

  </sect2>

  <sect2 id="cl-manual.forkingprograms" xreflabel="Forking Programs">
  <title>Forking Programs</title>

  <para>If your program forks, the child will inherit all the profiling
  data that has been gathered for the parent. To start with empty profile
  counter values in the child, the client request
  <computeroutput><xref linkend="cr.zero-stats"/>;</computeroutput>
  can be inserted into code to be executed by the child, directly after
  <computeroutput>fork</computeroutput>.</para>

  <para>However, you will have to make sure that the output file format string
  (controlled by <option>--callgrind-out-file</option>) does contain
  <option>%p</option> (which is true by default). Otherwise, the
  outputs from the parent and child will overwrite each other or will be
  intermingled, which almost certainly is not what you want.</para>

  <para>You will be able to control the new child independently from
  the parent via callgrind_control.</para>

  </sect2>

</sect1>


<sect1 id="cl-manual.options" xreflabel="Callgrind Command-line Options">
<title>Callgrind Command-line Options</title>

<para>
In the following, options are grouped into classes.
</para>
<para>
Some options allow the specification of a function/symbol name, such as
<option><xref linkend="opt.dump-before"/>=function</option>, or
<option><xref linkend="opt.fn-skip"/>=function</option>. All these options
can be specified multiple times for different functions.
In addition, the function specifications actually are patterns by supporting
the use of wildcards '*' (zero or more arbitrary characters) and '?'
(exactly one arbitrary character), similar to file name globbing in the
shell. This feature is important especially for C++, as without wildcard
usage, the function would have to be specified in full extent, including
parameter signature. </para>

<sect2 id="cl-manual.options.creation"
       xreflabel="Dump creation options">
<title>Dump creation options</title>

<para>
These options influence the name and format of the profile data files.
</para>

<!-- start of xi:include in the manpage -->
<variablelist id="cl.opts.list.creation">

  <varlistentry id="opt.callgrind-out-file" xreflabel="--callgrind-out-file">
    <term>
      <option><![CDATA[--callgrind-out-file=<file> ]]></option>
    </term>
    <listitem>
      <para>Write the profile data to
            <computeroutput>file</computeroutput> rather than to the default
            output file,
            <computeroutput>callgrind.out.&lt;pid&gt;</computeroutput>.  The
            <option>%p</option> and <option>%q</option> format specifiers
            can be used to embed the process ID and/or the contents of an
            environment variable in the name, as is the case for the core
            option <option><xref linkend="opt.log-file"/></option>.
            When multiple dumps are made, the file name
            is modified further; see below.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.dump-line" xreflabel="--dump-line">
    <term>
      <option><![CDATA[--dump-line=<no|yes> [default: yes] ]]></option>
    </term>
    <listitem>
      <para>This specifies that event counting should be performed at
      source line granularity. This allows source annotation for sources
      which are compiled with debug information
      (<option>-g</option>).</para>
  </listitem>
  </varlistentry>

  <varlistentry id="opt.dump-instr" xreflabel="--dump-instr">
    <term>
      <option><![CDATA[--dump-instr=<no|yes> [default: no] ]]></option>
    </term>
    <listitem>
      <para>This specifies that event counting should be performed at
      per-instruction granularity.
      This allows for assembly code
      annotation.  Currently the results can only be
      displayed by KCachegrind.</para>
  </listitem>
  </varlistentry>

  <varlistentry id="opt.compress-strings" xreflabel="--compress-strings">
    <term>
      <option><![CDATA[--compress-strings=<no|yes> [default: yes] ]]></option>
    </term>
    <listitem>
      <para>This option influences the output format of the profile data.
      It specifies whether strings (file and function names) should be
      identified by numbers. This shrinks the file,
      but makes it more difficult
      for humans to read (which is not recommended in any case).</para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.compress-pos" xreflabel="--compress-pos">
    <term>
      <option><![CDATA[--compress-pos=<no|yes> [default: yes] ]]></option>
    </term>
    <listitem>
      <para>This option influences the output format of the profile data.
      It specifies whether numerical positions are always specified as absolute
      values or are allowed to be relative to previous numbers.
      This shrinks the file size.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.combine-dumps" xreflabel="--combine-dumps">
    <term>
      <option><![CDATA[--combine-dumps=<no|yes> [default: no] ]]></option>
    </term>
    <listitem>
      <para>When enabled, when multiple profile data parts are to be
      generated these parts are appended to the same output file.
      Not recommended.</para>
  </listitem>
  </varlistentry>

</variablelist>
</sect2>

<sect2 id="cl-manual.options.activity"
       xreflabel="Activity options">
<title>Activity options</title>

<para>
These options specify when actions relating to event counts are to
be executed. For interactive control use callgrind_control.
</para>

<!-- start of xi:include in the manpage -->
<variablelist id="cl.opts.list.activity">

  <varlistentry id="opt.dump-every-bb" xreflabel="--dump-every-bb">
    <term>
      <option><![CDATA[--dump-every-bb=<count> [default: 0, never] ]]></option>
    </term>
    <listitem>
      <para>Dump profile data every <option>count</option> basic blocks.
      Whether a dump is needed is only checked when Valgrind's internal
      scheduler is run. Therefore, the minimum setting useful is about 100000.
      The count is a 64-bit value to make long dump periods possible.
      </para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.dump-before" xreflabel="--dump-before">
    <term>
      <option><![CDATA[--dump-before=<function> ]]></option>
    </term>
    <listitem>
      <para>Dump when entering <option>function</option>.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.zero-before" xreflabel="--zero-before">
    <term>
      <option><![CDATA[--zero-before=<function> ]]></option>
    </term>
    <listitem>
      <para>Zero all costs when entering <option>function</option>.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.dump-after" xreflabel="--dump-after">
    <term>
      <option><![CDATA[--dump-after=<function> ]]></option>
    </term>
    <listitem>
      <para>Dump when leaving <option>function</option>.</para>
    </listitem>
  </varlistentry>

</variablelist>
<!-- end of xi:include in the manpage -->
</sect2>

<sect2 id="cl-manual.options.collection"
       xreflabel="Data collection options">
<title>Data collection options</title>

<para>
These options specify when events are to be aggregated into event counts.
Also see <xref linkend="cl-manual.limits"/>.</para>

<!-- start of xi:include in the manpage -->
<variablelist id="cl.opts.list.collection">

  <varlistentry id="opt.instr-atstart" xreflabel="--instr-atstart">
    <term>
      <option><![CDATA[--instr-atstart=<yes|no> [default: yes] ]]></option>
    </term>
    <listitem>
      <para>Specify if you want Callgrind to start simulation and
      profiling from the beginning of the program.
      When set to <computeroutput>no</computeroutput>,
      Callgrind will not be able
      to collect any information, including calls, but it will have at
      most a slowdown of around 4, which is the minimum Valgrind
      overhead.  Instrumentation can be interactively enabled via
      <computeroutput>callgrind_control -i on</computeroutput>.</para>
      <para>Note that the resulting call graph will most probably not
      contain <function>main</function>, but will contain all the
      functions executed after instrumentation was enabled.
      Instrumentation can also programatically enabled/disabled. See the
      Callgrind include file
      <computeroutput>callgrind.h</computeroutput> for the macro
      you have to use in your source code.</para> <para>For cache
      simulation, results will be less accurate when switching on
      instrumentation later in the program run, as the simulator starts
      with an empty cache at that moment.  Switch on event collection
      later to cope with this error.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.collect-atstart" xreflabel="--collect-atstart">
    <term>
      <option><![CDATA[--collect-atstart=<yes|no> [default: yes] ]]></option>
    </term>
    <listitem>
      <para>Specify whether event collection is enabled at beginning
      of the profile run.</para>
      <para>To only look at parts of your program, you have two
      possibilities:</para>
      <orderedlist>
      <listitem>
        <para>Zero event counters before entering the program part you
        want to profile, and dump the event counters to a file after
        leaving that program part.</para>
        </listitem>
        <listitem>
          <para>Switch on/off collection state as needed to only see
          event counters happening while inside of the program part you
          want to profile.</para>
        </listitem>
      </orderedlist>
      <para>The second option can be used if the program part you want to
      profile is called many times. Option 1, i.e. creating a lot of
      dumps is not practical here.</para>
      <para>Collection state can be
      toggled at entry and exit of a given function with the
      option <option><xref linkend="opt.toggle-collect"/></option>.  If you
      use this option, collection
      state should be disabled at the beginning.  Note that the
      specification of <option>--toggle-collect</option>
      implicitly sets
      <option>--collect-state=no</option>.</para>
      <para>Collection state can be toggled also by inserting the client request
      <computeroutput>
      <!-- commented out because it causes broken links in the man page
      <xref linkend="cr.toggle-collect"/>;
      -->
      CALLGRIND_TOGGLE_COLLECT
      ;</computeroutput>
      at the needed code positions.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.toggle-collect" xreflabel="--toggle-collect">
    <term>
      <option><![CDATA[--toggle-collect=<function> ]]></option>
    </term>
    <listitem>
      <para>Toggle collection on entry/exit of <option>function</option>.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.collect-jumps" xreflabel="--collect-jumps">
    <term>
      <option><![CDATA[--collect-jumps=<no|yes> [default: no] ]]></option>
    </term>
    <listitem>
      <para>This specifies whether information for (conditional) jumps
      should be collected.  As above, callgrind_annotate currently is not
      able to show you the data.  You have to use KCachegrind to get jump
      arrows in the annotated code.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.collect-systime" xreflabel="--collect-systime">
    <term>
      <option><![CDATA[--collect-systime=<no|yes> [default: no] ]]></option>
    </term>
    <listitem>
      <para>This specifies whether information for system call times
      should be collected.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="clopt.collect-bus" xreflabel="--collect-bus">
    <term>
      <option><![CDATA[--collect-bus=<no|yes> [default: no] ]]></option>
    </term>
    <listitem>
      <para>This specifies whether the number of global bus events executed
      should be collected. The event type "Ge" is used for these events.</para>
    </listitem>
  </varlistentry>

</variablelist>
<!-- end of xi:include in the manpage -->
</sect2>

<sect2 id="cl-manual.options.separation"
       xreflabel="Cost entity separation options">
<title>Cost entity separation options</title>

<para>
These options specify how event counts should be attributed to execution
contexts.
For example, they specify whether the recursion level or the
call chain leading to a function should be taken into account,
and whether the thread ID should be considered.
Also see <xref linkend="cl-manual.cycles"/>.</para>

<!-- start of xi:include in the manpage -->
<variablelist id="cmd-options.separation">

  <varlistentry id="opt.separate-threads" xreflabel="--separate-threads">
    <term>
      <option><![CDATA[--separate-threads=<no|yes> [default: no] ]]></option>
    </term>
    <listitem>
      <para>This option specifies whether profile data should be generated
      separately for every thread. If yes, the file names get "-threadID"
      appended.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.separate-callers" xreflabel="--separate-callers">
    <term>
      <option><![CDATA[--separate-callers=<callers> [default: 0] ]]></option>
    </term>
    <listitem>
      <para>Separate contexts by at most &lt;callers&gt; functions in the
      call chain. See <xref linkend="cl-manual.cycles"/>.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.separate-callers-num" xreflabel="--separate-callers2">
    <term>
      <option><![CDATA[--separate-callers<number>=<function> ]]></option>
    </term>
    <listitem>
      <para>Separate <option>number</option> callers for <option>function</option>.
      See <xref linkend="cl-manual.cycles"/>.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.separate-recs" xreflabel="--separate-recs">
    <term>
      <option><![CDATA[--separate-recs=<level> [default: 2] ]]></option>
    </term>
    <listitem>
      <para>Separate function recursions by at most <option>level</option> levels.
      See <xref linkend="cl-manual.cycles"/>.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.separate-recs-num" xreflabel="--separate-recs10">
    <term>
      <option><![CDATA[--separate-recs<number>=<function> ]]></option>
    </term>
    <listitem>
      <para>Separate <option>number</option> recursions for <option>function</option>.
      See <xref linkend="cl-manual.cycles"/>.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.skip-plt" xreflabel="--skip-plt">
    <term>
      <option><![CDATA[--skip-plt=<no|yes> [default: yes] ]]></option>
    </term>
    <listitem>
      <para>Ignore calls to/from PLT sections.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.skip-direct-rec" xreflabel="--skip-direct-rec">
    <term>
      <option><![CDATA[--skip-direct-rec=<no|yes> [default: yes] ]]></option>
    </term>
    <listitem>
      <para>Ignore direct recursions.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.fn-skip" xreflabel="--fn-skip">
    <term>
      <option><![CDATA[--fn-skip=<function> ]]></option>
    </term>
    <listitem>
      <para>Ignore calls to/from a given function.  E.g. if you have a
      call chain A &gt; B &gt; C, and you specify function B to be
      ignored, you will only see A &gt; C.</para>
      <para>This is very convenient to skip functions handling callback
      behaviour.  For example, with the signal/slot mechanism in the
      Qt graphics library, you only want
      to see the function emitting a signal to call the slots connected
      to that signal. First, determine the real call chain to see the
      functions needed to be skipped, then use this option.</para>
    </listitem>
  </varlistentry>

<!--
    commenting out as it is only enabled with CLG_EXPERIMENTAL.  (Nb: I had to
    insert a space between the double dash to avoid XML comment problems.)

  <varlistentry id="opt.fn-group">
    <term>
      <option><![CDATA[- -fn-group<number>=<function> ]]></option>
    </term>
    <listitem>
      <para>Put a function into a separate group. This influences the
      context name for cycle avoidance. All functions inside such a
      group are treated as being the same for context name building, which
      resembles the call chain leading to a context. By specifying function
      groups with this option, you can shorten the context name, as functions
      in the same group will not appear in sequence in the name. </para>
    </listitem>
  </varlistentry>
-->

</variablelist>
<!-- end of xi:include in the manpage -->
</sect2>


<sect2 id="cl-manual.options.simulation"
       xreflabel="Simulation options">
<title>Simulation options</title>

<!-- start of xi:include in the manpage -->
<variablelist id="cl.opts.list.simulation">

  <varlistentry id="clopt.cache-sim" xreflabel="--cache-sim">
    <term>
      <option><![CDATA[--cache-sim=<yes|no> [default: no] ]]></option>
    </term>
    <listitem>
      <para>Specify if you want to do full cache simulation.  By default,
      only instruction read accesses will be counted ("Ir").
      With cache simulation, further event counters are enabled:
      Cache misses on instruction reads ("I1mr"/"ILmr"),
      data read accesses ("Dr") and related cache misses ("D1mr"/"DLmr"),
      data write accesses ("Dw") and related cache misses ("D1mw"/"DLmw").
      For more information, see <xref linkend="&vg-cg-manual-id;"/>.
      </para>
    </listitem>
  </varlistentry>

  <varlistentry id="clopt.branch-sim" xreflabel="--branch-sim">
    <term>
      <option><![CDATA[--branch-sim=<yes|no> [default: no] ]]></option>
    </term>
    <listitem>
      <para>Specify if you want to do branch prediction simulation.
      Further event counters are enabled: Number of executed conditional
      branches and related predictor misses ("Bc"/"Bcm"), executed indirect
      jumps and related misses of the jump address predictor ("Bi"/"Bim").
      </para>
    </listitem>
  </varlistentry>

</variablelist>
<!-- end of xi:include in the manpage -->
</sect2>


<sect2 id="cl-manual.options.cachesimulation"
       xreflabel="Cache simulation options">
<title>Cache simulation options</title>

<!-- start of xi:include in the manpage -->
<variablelist id="cl.opts.list.cachesimulation">

  <varlistentry id="opt.simulate-wb" xreflabel="--simulate-wb">
    <term>
      <option><![CDATA[--simulate-wb=<yes|no> [default: no] ]]></option>
    </term>
    <listitem>
      <para>Specify whether write-back behavior should be simulated, allowing
      to distinguish LL caches misses with and without write backs.
      The cache model of Cachegrind/Callgrind does not specify write-through
      vs. write-back behavior, and this also is not relevant for the number
      of generated miss counts. However, with explicit write-back simulation
      it can be decided whether a miss triggers not only the loading of a new
      cache line, but also if a write back of a dirty cache line had to take
      place before. The new dirty miss events are ILdmr, DLdmr, and DLdmw,
      for misses because of instruction read, data read, and data write,
      respectively. As they produce two memory transactions, they should
      account for a doubled time estimation in relation to a normal miss.
      </para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.simulate-hwpref" xreflabel="--simulate-hwpref">
    <term>
      <option><![CDATA[--simulate-hwpref=<yes|no> [default: no] ]]></option>
    </term>
    <listitem>
      <para>Specify whether simulation of a hardware prefetcher should be
      added which is able to detect stream access in the second level cache
      by comparing accesses to separate to each page.
      As the simulation can not decide about any timing issues of prefetching,
      it is assumed that any hardware prefetch triggered succeeds before a
      real access is done. Thus, this gives a best-case scenario by covering
      all possible stream accesses.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.cacheuse" xreflabel="--cacheuse">
    <term>
      <option><![CDATA[--cacheuse=<yes|no> [default: no] ]]></option>
    </term>
    <listitem>
      <para>Specify whether cache line use should be collected. For every
      cache line, from loading to it being evicted, the number of accesses
      as well as the number of actually used bytes is determined. This
      behavior is related to the code which triggered loading of the cache
      line. In contrast to miss counters, which shows the position where
      the symptoms of bad cache behavior (i.e. latencies) happens, the
      use counters try to pinpoint at the reason (i.e. the code with the
      bad access behavior). The new counters are defined in a way such
      that worse behavior results in higher cost.
      AcCost1 and AcCost2 are counters showing bad temporal locality
      for L1 and LL caches, respectively. This is done by summing up
      reciprocal values of the numbers of accesses of each cache line,
      multiplied by 1000 (as only integer costs are allowed). E.g. for
      a given source line with 5 read accesses, a value of 5000 AcCost
      means that for every access, a new cache line was loaded and directly
      evicted afterwards without further accesses. Similarly, SpLoss1/2
      shows bad spatial locality for L1 and LL caches, respectively. It
      gives the <emphasis>spatial loss</emphasis> count of bytes which
      were loaded into cache but never accessed. It pinpoints at code
      accessing data in a way such that cache space is wasted. This hints
      at bad layout of data structures in memory. Assuming a cache line
      size of 64 bytes and 100 L1 misses for a given source line, the
      loading of 6400 bytes into L1 was triggered. If SpLoss1 shows a
      value of 3200 for this line, this means that half of the loaded data was
      never used, or using a better data layout, only half of the cache
      space would have been needed.
      Please note that for cache line use counters, it currently is
      not possible to provide meaningful inclusive costs. Therefore,
      inclusive cost of these counters should be ignored.
      </para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.I1" xreflabel="--I1">
    <term>
      <option><![CDATA[--I1=<size>,<associativity>,<line size> ]]></option>
    </term>
    <listitem>
      <para>Specify the size, associativity and line size of the level 1
      instruction cache.  </para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.D1" xreflabel="--D1">
    <term>
      <option><![CDATA[--D1=<size>,<associativity>,<line size> ]]></option>
    </term>
    <listitem>
      <para>Specify the size, associativity and line size of the level 1
      data cache.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.LL" xreflabel="--LL">
    <term>
      <option><![CDATA[--LL=<size>,<associativity>,<line size> ]]></option>
    </term>
    <listitem>
      <para>Specify the size, associativity and line size of the last-level
      cache.</para>
    </listitem>
  </varlistentry>
</variablelist>
<!-- end of xi:include in the manpage -->

</sect2>

</sect1>

<sect1 id="cl-manual.monitor-commands" xreflabel="Callgrind Monitor Commands">
<title>Callgrind Monitor Commands</title>
<para>The Callgrind tool provides monitor commands handled by the Valgrind
gdbserver (see <xref linkend="manual-core-adv.gdbserver-commandhandling"/>).
</para>

<itemizedlist>
  <listitem>
    <para><varname>dump [&lt;dump_hint&gt;]</varname> requests to dump the
    profile data. </para>
  </listitem>

  <listitem>
    <para><varname>zero</varname> requests to zero the profile data
    counters. </para>
  </listitem>

  <listitem>
    <para><varname>instrumentation [on|off]</varname> requests to set
    (if parameter on/off is given) or get the current instrumentation state.
    </para>
  </listitem>

  <listitem>
    <para><varname>status</varname> requests to print out some status
    information.</para>
  </listitem>

</itemizedlist>
</sect1>

<sect1 id="cl-manual.clientrequests" xreflabel="Client request reference">
<title>Callgrind specific client requests</title>

<para>Callgrind provides the following specific client requests in
<filename>callgrind.h</filename>.  See that file for the exact details of
their arguments.</para>

<variablelist id="cl.clientrequests.list">

  <varlistentry id="cr.dump-stats" xreflabel="CALLGRIND_DUMP_STATS">
    <term>
      <computeroutput>CALLGRIND_DUMP_STATS</computeroutput>
    </term>
    <listitem>
      <para>Force generation of a profile dump at specified position
      in code, for the current thread only. Written counters will be reset
      to zero.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="cr.dump-stats-at" xreflabel="CALLGRIND_DUMP_STATS_AT">
    <term>
      <computeroutput>CALLGRIND_DUMP_STATS_AT(string)</computeroutput>
    </term>
    <listitem>
      <para>Same as <computeroutput>CALLGRIND_DUMP_STATS</computeroutput>,
      but allows to specify a string to be able to distinguish profile
      dumps.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="cr.zero-stats" xreflabel="CALLGRIND_ZERO_STATS">
    <term>
      <computeroutput>CALLGRIND_ZERO_STATS</computeroutput>
    </term>
    <listitem>
      <para>Reset the profile counters for the current thread to zero.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="cr.toggle-collect" xreflabel="CALLGRIND_TOGGLE_COLLECT">
    <term>
      <computeroutput>CALLGRIND_TOGGLE_COLLECT</computeroutput>
    </term>
    <listitem>
      <para>Toggle the collection state. This allows to ignore events
      with regard to profile counters. See also options
      <option><xref linkend="opt.collect-atstart"/></option> and
      <option><xref linkend="opt.toggle-collect"/></option>.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="cr.start-instr" xreflabel="CALLGRIND_START_INSTRUMENTATION">
    <term>
      <computeroutput>CALLGRIND_START_INSTRUMENTATION</computeroutput>
    </term>
    <listitem>
      <para>Start full Callgrind instrumentation if not already enabled.
      When cache simulation is done, this will flush the simulated cache
      and lead to an artificial cache warmup phase afterwards with
      cache misses which would not have happened in reality.  See also
      option <option><xref linkend="opt.instr-atstart"/></option>.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="cr.stop-instr" xreflabel="CALLGRIND_STOP_INSTRUMENTATION">
    <term>
      <computeroutput>CALLGRIND_STOP_INSTRUMENTATION</computeroutput>
    </term>
    <listitem>
      <para>Stop full Callgrind instrumentation if not already disabled.
      This flushes Valgrinds translation cache, and does no additional
      instrumentation afterwards: it effectivly will run at the same
      speed as Nulgrind, i.e. at minimal slowdown. Use this to
      speed up the Callgrind run for uninteresting code parts. Use
      <computeroutput><xref linkend="cr.start-instr"/></computeroutput> to
      enable instrumentation again.  See also option
      <option><xref linkend="opt.instr-atstart"/></option>.</para>
    </listitem>
  </varlistentry>

</variablelist>

</sect1>



<sect1 id="cl-manual.callgrind_annotate-options" xreflabel="callgrind_annotate Command-line Options">
<title>callgrind_annotate Command-line Options</title>

<!-- start of xi:include in the manpage -->
<variablelist id="callgrind_annotate.opts.list">

  <varlistentry>
    <term><option>-h --help</option></term>
    <listitem>
      <para>Show summary of options.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term><option>--version</option></term>
    <listitem>
      <para>Show version of callgrind_annotate.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term>
      <option>--show=A,B,C [default: all]</option>
    </term>
    <listitem>
      <para>Only show figures for events A,B,C.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term>
      <option>--sort=A,B,C</option>
    </term>
    <listitem>
      <para>Sort columns by events A,B,C [event column order].</para>
      <para>Optionally, each event is followed by a : and a threshold,
        to specify different thresholds depending on the event.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term>
      <option><![CDATA[--threshold=<0--100> [default: 99%] ]]></option>
    </term>
    <listitem>
      <para>Percentage of counts (of primary sort event) we are
      interested in.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term>
      <option><![CDATA[--auto=<yes|no> [default: no] ]]></option>
    </term>
    <listitem>
      <para>Annotate all source files containing functions that helped
      reach the event count threshold.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term>
      <option>--context=N [default: 8] </option>
    </term>
    <listitem>
      <para>Print N lines of context before and after annotated
      lines.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term>
      <option><![CDATA[--inclusive=<yes|no> [default: no] ]]></option>
    </term>
    <listitem>
      <para>Add subroutine costs to functions calls.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term>
      <option><![CDATA[--tree=<none|caller|calling|both> [default: none] ]]></option>
    </term>
    <listitem>
      <para>Print for each function their callers, the called functions
      or both.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term>
      <option><![CDATA[-I, --include=<dir> ]]></option>
    </term>
    <listitem>
      <para>Add <option>dir</option> to the list of directories to search
      for source files.</para>
  </listitem>
  </varlistentry>

</variablelist>
<!-- end of xi:include in the manpage -->


</sect1>




<sect1 id="cl-manual.callgrind_control-options" xreflabel="callgrind_control Command-line Options">
<title>callgrind_control Command-line Options</title>

<para>By default, callgrind_control acts on all programs run by the
  current user under Callgrind.  It is possible to limit the actions to
  specified Callgrind runs by providing a list of pids or program names as
  argument.  The default action is to give some brief information about the
  applications being run under Callgrind.</para>

<!-- start of xi:include in the manpage -->
<variablelist id="callgrind_control.opts.list">

  <varlistentry>
    <term><option>-h --help</option></term>
    <listitem>
      <para>Show a short description, usage, and summary of options.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term><option>--version</option></term>
    <listitem>
      <para>Show version of callgrind_control.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term><option>-l --long</option></term>
    <listitem>
      <para>Show also the working directory, in addition to the brief
      information given by default.
      </para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term><option>-s --stat</option></term>
    <listitem>
      <para>Show statistics information about active Callgrind runs.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term><option>-b --back</option></term>
    <listitem>
      <para>Show stack/back traces of each thread in active Callgrind runs. For
      each active function in the stack trace, also the number of invocations
      since program start (or last dump) is shown. This option can be
      combined with -e to show inclusive cost of active functions.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term><option><![CDATA[-e [A,B,...] ]]></option> (default: all)</term>
    <listitem>
      <para>Show the current per-thread, exclusive cost values of event
      counters. If no explicit event names are given, figures for all event
      types which are collected in the given Callgrind run are
      shown. Otherwise, only figures for event types A, B, ... are shown. If
      this option is combined with -b, inclusive cost for the functions of
      each active stack frame is provided, too.
      </para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term><option><![CDATA[--dump[=<desc>] ]]></option> (default: no description)</term>
    <listitem>
      <para>Request the dumping of profile information. Optionally, a
      description can be specified which is written into the dump as part of
      the information giving the reason which triggered the dump action. This
      can be used to distinguish multiple dumps.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term><option>-z --zero</option></term>
    <listitem>
      <para>Zero all event counters.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term><option>-k --kill</option></term>
    <listitem>
      <para>Force a Callgrind run to be terminated.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term><option><![CDATA[--instr=<on|off>]]></option></term>
    <listitem>
      <para>Switch instrumentation mode on or off. If a Callgrind run has
      instrumentation disabled, no simulation is done and no events are
      counted. This is useful to skip uninteresting program parts, as there
      is much less slowdown (same as with the Valgrind tool "none"). See also
      the Callgrind option <option>--instr-atstart</option>.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term><option><![CDATA[--vgdb-prefix=<prefix>]]></option></term>
    <listitem>
      <para>Specify the vgdb prefix to use by callgrind_control.
      callgrind_control internally uses vgdb to find and control the active
      Callgrind runs. If the <option>--vgdb-prefix</option> option was used
      for launching valgrind, then the same option must be given to
      callgrind_control.</para>
    </listitem>
  </varlistentry>
</variablelist>
<!-- end of xi:include in the manpage -->

</sect1>

</chapter>