1 /* 2 * lirc.h - linux infrared remote control header file 3 * last modified 2010/07/13 by Jarod Wilson 4 */ 5 6 #ifndef _LINUX_LIRC_H 7 #define _LINUX_LIRC_H 8 9 #include <linux/types.h> 10 #include <linux/ioctl.h> 11 12 #define PULSE_BIT 0x01000000 13 #define PULSE_MASK 0x00FFFFFF 14 15 #define LIRC_MODE2_SPACE 0x00000000 16 #define LIRC_MODE2_PULSE 0x01000000 17 #define LIRC_MODE2_FREQUENCY 0x02000000 18 #define LIRC_MODE2_TIMEOUT 0x03000000 19 20 #define LIRC_VALUE_MASK 0x00FFFFFF 21 #define LIRC_MODE2_MASK 0xFF000000 22 23 #define LIRC_SPACE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_SPACE) 24 #define LIRC_PULSE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_PULSE) 25 #define LIRC_FREQUENCY(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY) 26 #define LIRC_TIMEOUT(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT) 27 28 #define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK) 29 #define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK) 30 31 #define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE) 32 #define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE) 33 #define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY) 34 #define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT) 35 36 /* used heavily by lirc userspace */ 37 #define lirc_t int 38 39 /*** lirc compatible hardware features ***/ 40 41 #define LIRC_MODE2SEND(x) (x) 42 #define LIRC_SEND2MODE(x) (x) 43 #define LIRC_MODE2REC(x) ((x) << 16) 44 #define LIRC_REC2MODE(x) ((x) >> 16) 45 46 #define LIRC_MODE_RAW 0x00000001 47 #define LIRC_MODE_PULSE 0x00000002 48 #define LIRC_MODE_MODE2 0x00000004 49 #define LIRC_MODE_LIRCCODE 0x00000010 50 51 52 #define LIRC_CAN_SEND_RAW LIRC_MODE2SEND(LIRC_MODE_RAW) 53 #define LIRC_CAN_SEND_PULSE LIRC_MODE2SEND(LIRC_MODE_PULSE) 54 #define LIRC_CAN_SEND_MODE2 LIRC_MODE2SEND(LIRC_MODE_MODE2) 55 #define LIRC_CAN_SEND_LIRCCODE LIRC_MODE2SEND(LIRC_MODE_LIRCCODE) 56 57 #define LIRC_CAN_SEND_MASK 0x0000003f 58 59 #define LIRC_CAN_SET_SEND_CARRIER 0x00000100 60 #define LIRC_CAN_SET_SEND_DUTY_CYCLE 0x00000200 61 #define LIRC_CAN_SET_TRANSMITTER_MASK 0x00000400 62 63 #define LIRC_CAN_REC_RAW LIRC_MODE2REC(LIRC_MODE_RAW) 64 #define LIRC_CAN_REC_PULSE LIRC_MODE2REC(LIRC_MODE_PULSE) 65 #define LIRC_CAN_REC_MODE2 LIRC_MODE2REC(LIRC_MODE_MODE2) 66 #define LIRC_CAN_REC_LIRCCODE LIRC_MODE2REC(LIRC_MODE_LIRCCODE) 67 68 #define LIRC_CAN_REC_MASK LIRC_MODE2REC(LIRC_CAN_SEND_MASK) 69 70 #define LIRC_CAN_SET_REC_CARRIER (LIRC_CAN_SET_SEND_CARRIER << 16) 71 #define LIRC_CAN_SET_REC_DUTY_CYCLE (LIRC_CAN_SET_SEND_DUTY_CYCLE << 16) 72 73 #define LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE 0x40000000 74 #define LIRC_CAN_SET_REC_CARRIER_RANGE 0x80000000 75 #define LIRC_CAN_GET_REC_RESOLUTION 0x20000000 76 #define LIRC_CAN_SET_REC_TIMEOUT 0x10000000 77 #define LIRC_CAN_SET_REC_FILTER 0x08000000 78 79 #define LIRC_CAN_MEASURE_CARRIER 0x02000000 80 #define LIRC_CAN_USE_WIDEBAND_RECEIVER 0x04000000 81 82 #define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK) 83 #define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK) 84 85 #define LIRC_CAN_NOTIFY_DECODE 0x01000000 86 87 /*** IOCTL commands for lirc driver ***/ 88 89 #define LIRC_GET_FEATURES _IOR('i', 0x00000000, __u32) 90 91 #define LIRC_GET_SEND_MODE _IOR('i', 0x00000001, __u32) 92 #define LIRC_GET_REC_MODE _IOR('i', 0x00000002, __u32) 93 #define LIRC_GET_REC_RESOLUTION _IOR('i', 0x00000007, __u32) 94 95 #define LIRC_GET_MIN_TIMEOUT _IOR('i', 0x00000008, __u32) 96 #define LIRC_GET_MAX_TIMEOUT _IOR('i', 0x00000009, __u32) 97 98 /* code length in bits, currently only for LIRC_MODE_LIRCCODE */ 99 #define LIRC_GET_LENGTH _IOR('i', 0x0000000f, __u32) 100 101 #define LIRC_SET_SEND_MODE _IOW('i', 0x00000011, __u32) 102 #define LIRC_SET_REC_MODE _IOW('i', 0x00000012, __u32) 103 /* Note: these can reset the according pulse_width */ 104 #define LIRC_SET_SEND_CARRIER _IOW('i', 0x00000013, __u32) 105 #define LIRC_SET_REC_CARRIER _IOW('i', 0x00000014, __u32) 106 #define LIRC_SET_SEND_DUTY_CYCLE _IOW('i', 0x00000015, __u32) 107 #define LIRC_SET_TRANSMITTER_MASK _IOW('i', 0x00000017, __u32) 108 109 /* 110 * when a timeout != 0 is set the driver will send a 111 * LIRC_MODE2_TIMEOUT data packet, otherwise LIRC_MODE2_TIMEOUT is 112 * never sent, timeout is disabled by default 113 */ 114 #define LIRC_SET_REC_TIMEOUT _IOW('i', 0x00000018, __u32) 115 116 /* 1 enables, 0 disables timeout reports in MODE2 */ 117 #define LIRC_SET_REC_TIMEOUT_REPORTS _IOW('i', 0x00000019, __u32) 118 119 /* 120 * if enabled from the next key press on the driver will send 121 * LIRC_MODE2_FREQUENCY packets 122 */ 123 #define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32) 124 125 /* 126 * to set a range use LIRC_SET_REC_CARRIER_RANGE with the 127 * lower bound first and later LIRC_SET_REC_CARRIER with the upper bound 128 */ 129 #define LIRC_SET_REC_CARRIER_RANGE _IOW('i', 0x0000001f, __u32) 130 131 #define LIRC_SET_WIDEBAND_RECEIVER _IOW('i', 0x00000023, __u32) 132 133 #endif 134