1 /****************************************************************************** 2 * 3 * Copyright (C) 1999-2012 Broadcom Corporation 4 * 5 * Licensed under the Apache License, Version 2.0 (the "License"); 6 * you may not use this file except in compliance with the License. 7 * You may obtain a copy of the License at: 8 * 9 * http://www.apache.org/licenses/LICENSE-2.0 10 * 11 * Unless required by applicable law or agreed to in writing, software 12 * distributed under the License is distributed on an "AS IS" BASIS, 13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 * See the License for the specific language governing permissions and 15 * limitations under the License. 16 * 17 ******************************************************************************/ 18 19 #ifndef L2CDEFS_H 20 #define L2CDEFS_H 21 22 /* L2CAP command codes 23 */ 24 #define L2CAP_CMD_REJECT 0x01 25 #define L2CAP_CMD_CONN_REQ 0x02 26 #define L2CAP_CMD_CONN_RSP 0x03 27 #define L2CAP_CMD_CONFIG_REQ 0x04 28 #define L2CAP_CMD_CONFIG_RSP 0x05 29 #define L2CAP_CMD_DISC_REQ 0x06 30 #define L2CAP_CMD_DISC_RSP 0x07 31 #define L2CAP_CMD_ECHO_REQ 0x08 32 #define L2CAP_CMD_ECHO_RSP 0x09 33 #define L2CAP_CMD_INFO_REQ 0x0A 34 #define L2CAP_CMD_INFO_RSP 0x0B 35 #define L2CAP_CMD_AMP_CONN_REQ 0x0C 36 #define L2CAP_CMD_AMP_CONN_RSP 0x0D 37 #define L2CAP_CMD_AMP_MOVE_REQ 0x0E 38 #define L2CAP_CMD_AMP_MOVE_RSP 0x0F 39 #define L2CAP_CMD_AMP_MOVE_CFM 0x10 40 #define L2CAP_CMD_AMP_MOVE_CFM_RSP 0x11 41 #define L2CAP_CMD_BLE_UPDATE_REQ 0x12 42 #define L2CAP_CMD_BLE_UPDATE_RSP 0x13 43 #define L2CAP_CMD_BLE_CREDIT_BASED_CONN_REQ 0x14 44 #define L2CAP_CMD_BLE_CREDIT_BASED_CONN_RES 0x15 45 #define L2CAP_CMD_BLE_FLOW_CTRL_CREDIT 0x16 46 47 /* Define some packet and header lengths 48 */ 49 /* Length and CID */ 50 #define L2CAP_PKT_OVERHEAD 4 51 /* Cmd code, Id and length */ 52 #define L2CAP_CMD_OVERHEAD 4 53 /* Reason (data is optional) */ 54 #define L2CAP_CMD_REJECT_LEN 2 55 /* PSM and source CID */ 56 #define L2CAP_CONN_REQ_LEN 4 57 /* Dest CID, source CID, reason, status */ 58 #define L2CAP_CONN_RSP_LEN 8 59 /* Dest CID, flags (data is optional) */ 60 #define L2CAP_CONFIG_REQ_LEN 4 61 /* Dest CID, flags, result,data optional*/ 62 #define L2CAP_CONFIG_RSP_LEN 6 63 /* Dest CID, source CID */ 64 #define L2CAP_DISC_REQ_LEN 4 65 /* Dest CID, source CID */ 66 #define L2CAP_DISC_RSP_LEN 4 67 /* Data is optional */ 68 #define L2CAP_ECHO_REQ_LEN 0 69 /* Data is optional */ 70 #define L2CAP_ECHO_RSP_LEN 0 71 /* Info type */ 72 #define L2CAP_INFO_REQ_LEN 2 73 /* Info type, result (data is optional) */ 74 #define L2CAP_INFO_RSP_LEN 4 75 /* Additional connectionless packet overhead */ 76 #define L2CAP_UCD_OVERHEAD 2 77 78 /* PSM, CID, and remote controller ID */ 79 #define L2CAP_AMP_CONN_REQ_LEN 5 80 /* CID and remote controller ID */ 81 #define L2CAP_AMP_MOVE_REQ_LEN 3 82 /* CID and result */ 83 #define L2CAP_AMP_MOVE_RSP_LEN 4 84 /* CID and result */ 85 #define L2CAP_AMP_MOVE_CFM_LEN 4 86 /* CID */ 87 #define L2CAP_AMP_MOVE_CFM_RSP_LEN 2 88 89 /* Min and max interval, latency, tout */ 90 #define L2CAP_CMD_BLE_UPD_REQ_LEN 8 91 /* Result */ 92 #define L2CAP_CMD_BLE_UPD_RSP_LEN 2 93 94 /* LE_PSM, SCID, MTU, MPS, Init Credit */ 95 #define L2CAP_CMD_BLE_CREDIT_BASED_CONN_REQ_LEN 10 96 /* DCID, MTU, MPS, Init credit, Result */ 97 #define L2CAP_CMD_BLE_CREDIT_BASED_CONN_RES_LEN 10 98 /* CID, Credit */ 99 #define L2CAP_CMD_BLE_FLOW_CTRL_CREDIT_LEN 4 100 101 /* Define the packet boundary flags 102 */ 103 #if (L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE) 104 #define L2CAP_PKT_START_FLUSHABLE 2 105 #define L2CAP_PKT_START_NON_FLUSHABLE 0 106 #endif 107 #define L2CAP_COMPLETE_AMP_PKT 3 /* complete L2CAP packet on AMP HCI */ 108 #define L2CAP_PKT_START 2 109 #define L2CAP_PKT_CONTINUE 1 110 #define L2CAP_MASK_FLAG 0x0FFF 111 #define L2CAP_PKT_TYPE_SHIFT 12 112 #define L2CAP_PKT_TYPE_MASK 3 113 114 /* Define the L2CAP connection result codes 115 */ 116 #define L2CAP_CONN_OK 0 117 #define L2CAP_CONN_PENDING 1 118 #define L2CAP_CONN_NO_PSM 2 119 #define L2CAP_CONN_SECURITY_BLOCK 3 120 #define L2CAP_CONN_NO_RESOURCES 4 121 #define L2CAP_CONN_BAD_CTLR_ID 5 /* AMP related */ 122 #define L2CAP_CONN_TIMEOUT 0xEEEE 123 #define L2CAP_CONN_AMP_FAILED 254 124 /* Add a couple of our own for internal use */ 125 #define L2CAP_CONN_NO_LINK 255 126 #define L2CAP_CONN_CANCEL 256 /* L2CAP connection cancelled */ 127 128 /* Define the LE L2CAP connection result codes 129 */ 130 #define L2CAP_LE_CONN_OK 0 131 #define L2CAP_LE_NO_PSM 2 132 #define L2CAP_LE_NO_RESOURCES 4 133 #define L2CAP_LE_INSUFFICIENT_AUTHENTICATION 5 134 #define L2CAP_LE_INSUFFICIENT_AUTHORIZATION 6 135 #define L2CAP_LE_INSUFFICIENT_ENCRYP_KEY_SIZE 7 136 #define L2CAP_LE_INSUFFICIENT_ENCRYP 8 137 /* We don't like peer device response */ 138 #define L2CAP_LE_INVALID_SOURCE_CID 9 139 #define L2CAP_LE_SOURCE_CID_ALREADY_ALLOCATED 0x0A 140 141 /* Define L2CAP Move Channel Response result codes 142 */ 143 #define L2CAP_MOVE_OK 0 144 #define L2CAP_MOVE_PENDING 1 145 #define L2CAP_MOVE_CTRL_ID_NOT_SUPPORT 2 146 #define L2CAP_MOVE_SAME_CTRLR_ID 3 147 #define L2CAP_MOVE_CONFIG_NOT_SUPPORTED 4 148 #define L2CAP_MOVE_CHAN_COLLISION 5 149 #define L2CAP_MOVE_NOT_ALLOWED 6 150 151 /* Define L2CAP Move Channel Confirmation result codes 152 */ 153 #define L2CAP_MOVE_CFM_OK 0 154 #define L2CAP_MOVE_CFM_REFUSED 1 155 156 /* Define the L2CAP command reject reason codes 157 */ 158 #define L2CAP_CMD_REJ_NOT_UNDERSTOOD 0 159 #define L2CAP_CMD_REJ_MTU_EXCEEDED 1 160 #define L2CAP_CMD_REJ_INVALID_CID 2 161 162 /* L2CAP Predefined CIDs 163 */ 164 #define L2CAP_SIGNALLING_CID 1 165 #define L2CAP_CONNECTIONLESS_CID 2 166 #define L2CAP_AMP_CID 3 167 #define L2CAP_ATT_CID 4 168 #define L2CAP_BLE_SIGNALLING_CID 5 169 #define L2CAP_SMP_CID 6 170 #define L2CAP_SMP_BR_CID 7 171 #define L2CAP_AMP_TEST_CID 0x003F 172 #define L2CAP_BASE_APPL_CID 0x0040 173 #define L2CAP_BLE_CONN_MAX_CID 0x007F 174 175 /* Fixed Channels mask bits */ 176 177 /* Signal channel supported (Mandatory) */ 178 #define L2CAP_FIXED_CHNL_SIG_BIT (1 << L2CAP_SIGNALLING_CID) 179 180 /* Connectionless reception */ 181 #define L2CAP_FIXED_CHNL_CNCTLESS_BIT (1 << L2CAP_CONNECTIONLESS_CID) 182 183 /* AMP Manager supported */ 184 #define L2CAP_FIXED_CHNL_AMP_BIT (1 << L2CAP_AMP_CID) 185 186 /* Attribute protocol supported */ 187 #define L2CAP_FIXED_CHNL_ATT_BIT (1 << L2CAP_ATT_CID) 188 189 /* BLE Signalling supported */ 190 #define L2CAP_FIXED_CHNL_BLE_SIG_BIT (1 << L2CAP_BLE_SIGNALLING_CID) 191 192 /* BLE Security Mgr supported */ 193 #define L2CAP_FIXED_CHNL_SMP_BIT (1 << L2CAP_SMP_CID) 194 195 /* Security Mgr over BR supported */ 196 #define L2CAP_FIXED_CHNL_SMP_BR_BIT (1 << L2CAP_SMP_BR_CID) 197 198 /* Define the L2CAP configuration result codes 199 */ 200 #define L2CAP_CFG_OK 0 201 #define L2CAP_CFG_UNACCEPTABLE_PARAMS 1 202 #define L2CAP_CFG_FAILED_NO_REASON 2 203 #define L2CAP_CFG_UNKNOWN_OPTIONS 3 204 #define L2CAP_CFG_PENDING 4 205 #define L2CAP_CFG_FLOW_SPEC_REJECTED 5 206 207 /* Define the L2CAP configuration option types 208 */ 209 #define L2CAP_CFG_TYPE_MTU 0x01 210 #define L2CAP_CFG_TYPE_FLUSH_TOUT 0x02 211 #define L2CAP_CFG_TYPE_QOS 0x03 212 #define L2CAP_CFG_TYPE_FCR 0x04 213 #define L2CAP_CFG_TYPE_FCS 0x05 214 #define L2CAP_CFG_TYPE_EXT_FLOW 0x06 215 #define L2CAP_CFG_TYPE_EXT_WIN_SIZE 0x07 216 217 #define L2CAP_CFG_MTU_OPTION_LEN 2 /* MTU option length */ 218 #define L2CAP_CFG_FLUSH_OPTION_LEN 2 /* Flush option len */ 219 #define L2CAP_CFG_QOS_OPTION_LEN 22 /* QOS option length */ 220 #define L2CAP_CFG_FCR_OPTION_LEN 9 /* FCR option length */ 221 #define L2CAP_CFG_FCS_OPTION_LEN 1 /* FCR option length */ 222 #define L2CAP_CFG_EXT_FLOW_OPTION_LEN 16 /* Extended Flow Spec */ 223 #define L2CAP_CFG_EXT_WIN_SIZE_LEN 2 /* Ext window size length */ 224 #define L2CAP_CFG_OPTION_OVERHEAD 2 /* Type and length */ 225 226 /* Configuration Cmd/Rsp Flags mask 227 */ 228 #define L2CAP_CFG_FLAGS_MASK_CONT 0x0001 /* Flags mask: Continuation */ 229 230 /* FCS Check Option values 231 */ 232 #define L2CAP_CFG_FCS_BYPASS 0 /* Bypass the FCS in streaming or ERTM modes */ 233 #define L2CAP_CFG_FCS_USE \ 234 1 /* Use the FCS in streaming or ERTM modes [default] */ 235 236 /* Default values for configuration 237 */ 238 #define L2CAP_NO_AUTOMATIC_FLUSH 0xFFFF 239 #define L2CAP_NO_RETRANSMISSION 0x0001 240 241 #define L2CAP_DEFAULT_MTU (672) 242 #define L2CAP_DEFAULT_FLUSH_TO L2CAP_NO_AUTOMATIC_FLUSH 243 #define L2CAP_DEFAULT_SERV_TYPE 1 244 #define L2CAP_DEFAULT_TOKEN_RATE 0 245 #define L2CAP_DEFAULT_BUCKET_SIZE 0 246 #define L2CAP_DEFAULT_PEAK_BANDWIDTH 0 247 #define L2CAP_DEFAULT_LATENCY 0xFFFFFFFF 248 #define L2CAP_DEFAULT_DELAY 0xFFFFFFFF 249 #define L2CAP_DEFAULT_FCS L2CAP_CFG_FCS_USE 250 251 /* Define the L2CAP disconnect result codes 252 */ 253 #define L2CAP_DISC_OK 0 254 #define L2CAP_DISC_TIMEOUT 0xEEEE 255 256 /* Define the L2CAP info resp result codes 257 */ 258 #define L2CAP_INFO_RESP_RESULT_SUCCESS 0 259 #define L2CAP_INFO_RESP_RESULT_NOT_SUPPORTED 1 260 261 /* Define the info-type fields of information request & response 262 */ 263 #define L2CAP_CONNLESS_MTU_INFO_TYPE 0x0001 264 /* Used in Information Req/Response */ 265 #define L2CAP_EXTENDED_FEATURES_INFO_TYPE 0x0002 266 /* Used in AMP */ 267 #define L2CAP_FIXED_CHANNELS_INFO_TYPE 0x0003 268 269 /* Connectionless MTU size */ 270 #define L2CAP_CONNLESS_MTU_INFO_SIZE 2 271 /* Extended features array size */ 272 #define L2CAP_EXTENDED_FEATURES_ARRAY_SIZE 4 273 /* Fixed channel array size */ 274 #define L2CAP_FIXED_CHNL_ARRAY_SIZE 8 275 276 /* Extended features mask bits 277 */ 278 /* Retransmission Mode (Not Supported) */ 279 #define L2CAP_EXTFEA_RTRANS 0x00000001 280 /* Flow Control Mode (Not Supported) */ 281 #define L2CAP_EXTFEA_FC 0x00000002 282 #define L2CAP_EXTFEA_QOS 0x00000004 283 /* Enhanced retransmission mode */ 284 #define L2CAP_EXTFEA_ENH_RETRANS 0x00000008 285 /* Streaming Mode */ 286 #define L2CAP_EXTFEA_STREAM_MODE 0x00000010 287 /* Optional FCS (if set No FCS desired) */ 288 #define L2CAP_EXTFEA_NO_CRC 0x00000020 289 /* Extended flow spec */ 290 #define L2CAP_EXTFEA_EXT_FLOW_SPEC 0x00000040 291 /* Fixed channels */ 292 #define L2CAP_EXTFEA_FIXED_CHNLS 0x00000080 293 /* Extended Window Size */ 294 #define L2CAP_EXTFEA_EXT_WINDOW 0x00000100 295 /* Unicast Connectionless Data Reception */ 296 #define L2CAP_EXTFEA_UCD_RECEPTION 0x00000200 297 298 /* Mask for locally supported features used in Information Response 299 * (default to none) */ 300 #ifndef L2CAP_EXTFEA_SUPPORTED_MASK 301 #define L2CAP_EXTFEA_SUPPORTED_MASK 0 302 #endif 303 304 /* Mask for LE supported features used in Information Response 305 * (default to none) */ 306 #ifndef L2CAP_BLE_EXTFEA_MASK 307 #define L2CAP_BLE_EXTFEA_MASK 0 308 #endif 309 310 /* Define a value that tells L2CAP to use the default HCI ACL buffer size */ 311 #define L2CAP_INVALID_ERM_BUF_SIZE 0 312 /* Define a value that tells L2CAP to use the default MPS */ 313 #define L2CAP_DEFAULT_ERM_MPS 0x0000 314 315 #define L2CAP_FCR_OVERHEAD 2 /* Control word */ 316 #define L2CAP_FCS_LEN 2 /* FCS takes 2 bytes */ 317 #define L2CAP_SDU_LEN_OVERHEAD 2 /* SDU length field is 2 bytes */ 318 #define L2CAP_SDU_LEN_OFFSET 2 /* SDU length offset is 2 bytes */ 319 #define L2CAP_EXT_CONTROL_OVERHEAD 4 /* Extended Control Field */ 320 /* length(2), channel(2), control(4), SDU length(2) FCS(2) */ 321 #define L2CAP_MAX_HEADER_FCS \ 322 (L2CAP_PKT_OVERHEAD + L2CAP_EXT_CONTROL_OVERHEAD + L2CAP_SDU_LEN_OVERHEAD + \ 323 L2CAP_FCS_LEN) 324 325 /* To optimize this, it must be a multiple of the L2CAP PDU length AND match 326 * the 3DH5 air including the l2cap headers in each packet. To match the latter, 327 * the -5 is added. 328 * Changed it to 8087 to have same value between BTIF and L2cap layers 329 */ 330 #define L2CAP_MAX_SDU_LENGTH (8080 + 26 - (L2CAP_MIN_OFFSET + 6)) 331 #define L2CAP_MAX_BUF_SIZE (10240 + 24) 332 333 /* Part of L2CAP_MIN_OFFSET that is not part of L2CAP 334 */ 335 #define L2CAP_OFFSET_WO_L2HDR \ 336 (L2CAP_MIN_OFFSET - (L2CAP_PKT_OVERHEAD + L2CAP_FCR_OVERHEAD)) 337 338 /* SAR bits in the control word 339 */ 340 /* Control word to begin with for unsegmented PDU*/ 341 #define L2CAP_FCR_UNSEG_SDU 0x0000 342 /* ...for Starting PDU of a semented SDU */ 343 #define L2CAP_FCR_START_SDU 0x4000 344 /* ...for ending PDU of a segmented SDU */ 345 #define L2CAP_FCR_END_SDU 0x8000 346 /* ...for continuation PDU of a segmented SDU */ 347 #define L2CAP_FCR_CONT_SDU 0xc000 348 349 /* Supervisory frame types */ 350 /* Supervisory frame - RR */ 351 #define L2CAP_FCR_SUP_RR 0x0000 352 /* Supervisory frame - REJ */ 353 #define L2CAP_FCR_SUP_REJ 0x0001 354 /* Supervisory frame - RNR */ 355 #define L2CAP_FCR_SUP_RNR 0x0002 356 /* Supervisory frame - SREJ */ 357 #define L2CAP_FCR_SUP_SREJ 0x0003 358 359 /* Mask to get the SAR bits from control word */ 360 #define L2CAP_FCR_SAR_BITS 0xC000 361 /* Bits to shift right to get the SAR bits from ctrl-word */ 362 #define L2CAP_FCR_SAR_BITS_SHIFT 14 363 364 /* Mask to check if a PDU is S-frame */ 365 #define L2CAP_FCR_S_FRAME_BIT 0x0001 366 /* Mask to get the req-seq from control word */ 367 #define L2CAP_FCR_REQ_SEQ_BITS 0x3F00 368 /* Bits to shift right to get the req-seq from ctrl-word */ 369 #define L2CAP_FCR_REQ_SEQ_BITS_SHIFT 8 370 /* Mask on get the tx-seq from control word */ 371 #define L2CAP_FCR_TX_SEQ_BITS 0x007E 372 /* Bits to shift right to get the tx-seq from ctrl-word */ 373 #define L2CAP_FCR_TX_SEQ_BITS_SHIFT 1 374 375 /* F-bit in the control word (Sup and I frames) */ 376 #define L2CAP_FCR_F_BIT 0x0080 377 /* P-bit in the control word (Sup frames only) */ 378 #define L2CAP_FCR_P_BIT 0x0010 379 380 #define L2CAP_FCR_F_BIT_SHIFT 7 381 #define L2CAP_FCR_P_BIT_SHIFT 4 382 383 /* Mask to get the segmentation bits from ctrl-word */ 384 #define L2CAP_FCR_SEG_BITS 0xC000 385 /* Bits to shift right to get the S-bits from ctrl-word */ 386 #define L2CAP_FCR_SUP_SHIFT 2 387 /* Mask to get the supervisory bits from ctrl-word */ 388 #define L2CAP_FCR_SUP_BITS 0x000C 389 390 /* Initial state of the CRC register */ 391 #define L2CAP_FCR_INIT_CRC 0 392 /* Mask for sequence numbers (range 0 - 63) */ 393 #define L2CAP_FCR_SEQ_MODULO 0x3F 394 395 #endif 396