1 /*
2
3 /usr/src/ext2ed/main.c
4
5 A part of the extended file system 2 disk editor.
6
7 ------------
8 Main program
9 ------------
10
11 This file mostly contains:
12
13 1. A list of global variables used through the entire program.
14 2. The parser, which asks the command line from the user.
15 3. The dispatcher, which analyzes the command line and calls the appropriate handler function.
16 4. A command pattern matcher which is used along with the readline completion feature.
17 5. A function which tells the user that an internal error has occured.
18
19 First written on: March 30 1995
20
21 Copyright (C) 1995 Gadi Oxman
22
23 */
24
25 #include "config.h"
26 #include <stdio.h>
27 #include <stdlib.h>
28 #include <string.h>
29 #include <signal.h>
30
31 #ifdef HAVE_READLINE
32 #include <readline.h>
33 #include <history.h>
34 #endif
35
36 #ifdef HAVE_GETOPT_H
37 #include <getopt.h>
38 #else
39 extern int optind;
40 extern char *optarg;
41 #endif
42
43 #include "ext2ed.h"
44
45 /* Global variables */
46
47 /*
48
49 Configuration file options
50
51 The following variables will be set by init.c to the values selected in the user configuration file.
52 They are initialized below to some logical defaults.
53
54 */
55
56
57 char Ext2Descriptors [200]="ext2.descriptors"; /* The location of the ext2 filesystem object definition */
58 char AlternateDescriptors [200]=""; /* We allow the user to define additional structures */
59 char LogFile [200]="ext2ed.log"; /* The location of the log file - Each write will be logged there */
60 int LogChanges=1; /* 1 enables logging, 0 diables logging */
61 int AllowChanges=0; /* When set, the enablewrite command will fail */
62 int AllowMountedRead=0; /* Behavior when trying to open a mounted filesystem read-only */
63 int ForceExt2=0; /* When set, ext2 autodetection is overridden */
64 int DefaultBlockSize=1024;
65 unsigned long DefaultTotalBlocks=2097151;
66 unsigned long DefaultBlocksInGroup=8192; /* The default values are used when an ext2 filesystem is not */
67 int ForceDefault=0; /* detected, or ForceDefault is set */
68
69 char last_command_line [80]; /* A simple one command cache, in addition to the readline history */
70
71 char device_name [80]; /* The location of the filesystem */
72 FILE *device_handle=NULL; /* This is passed to the fopen / fread ... commands */
73 long device_offset; /* The current position in the filesystem */
74 /* Note that we have a 2 GB limitation */
75
76 int mounted=0; /* This is set when we find that the filesystem is mounted */
77
78 struct struct_commands general_commands,ext2_commands; /* Used to define the general and ext2 commands */
79 struct struct_descriptor *first_type,*last_type,*current_type; /* Used to access the double linked list */
80 struct struct_type_data type_data; /* The current data is sometimes stored here */
81 struct struct_file_system_info file_system_info; /* Essential information on the filesystem */
82 struct struct_file_info file_info,first_file_info; /* Used by file_com.c to access files */
83 struct struct_group_info group_info; /* Used by group_com.c */
84 struct struct_super_info super_info; /* Used by super_com.c */
85 struct struct_remember_lifo remember_lifo; /* A circular memory of objects */
86 struct struct_block_bitmap_info block_bitmap_info; /* Used by blockbitmap_com.c */
87 struct struct_inode_bitmap_info inode_bitmap_info; /* Used by inodebitmap_com.c */
88
89 int redraw_request=0; /* Is set by a signal handler to handle terminal */
90 /* screen size change. */
91
92
93 /*
94 * We just call the parser to get commands from the user. We quit when
95 * parser returns.
96 */
main(int argc,char ** argv)97 int main (int argc, char **argv)
98 {
99 int write_priv = 0;
100 int c;
101 char *buf;
102
103 if (!init ())
104 return (1);
105 while ((c = getopt (argc, argv, "w")) != EOF) {
106 switch (c) {
107 case 'w':
108 write_priv++;
109 break;
110 }
111 }
112 if (optind < argc) {
113 buf = malloc(strlen(argv[optind]) + 32);
114 if (!buf) {
115 fprintf(stderr, "Couldn't allocate filename buffer\n");
116 exit(1);
117 }
118 strcpy(buf, "set_device ");
119 strcat(buf, argv[optind]);
120 set_device(buf);
121 free(buf);
122 if (write_priv) {
123 wprintw (command_win,"\n");
124 enable_write("enable_write");
125 }
126 }
127 parser (); /* Get and parse user commands */
128 prepare_to_close(); /* Do some cleanup */
129 printf("Quitting ...\n");
130 return(0);
131 }
132
133
134 /*
135 * Read a character from the command window
136 */
command_read_key()137 int command_read_key()
138 {
139 int key = 0;
140
141 while (!key) {
142 if (redraw_request) {
143 redraw_all();
144 redraw_request=0;
145 }
146 key = wgetch(command_win);
147 switch (key) {
148 case 0x1A:
149 key = 0;
150 kill(getpid(), SIGTSTP);
151 break;
152
153 case KEY_NPAGE:
154 pgdn("");
155 refresh_command_win ();
156 break;
157
158 case KEY_PPAGE:
159 pgup("");
160 refresh_command_win ();
161 break;
162 case ERR:
163 key = 0;
164 break;
165
166 case KEY_BACKSPACE:
167 key = '\b';
168 }
169 if ((key < 32 && key != '\b' && key != '\n') ||
170 (key > 127))
171 key = 0;
172 }
173 return key;
174 }
175
176 #ifdef HAVE_READLINE
rl_getc_replacement(FILE * f)177 int rl_getc_replacement(FILE *f)
178 {
179 int key = command_read_key();
180
181 if (key == '\b') {
182 if (rl_point > 0)
183 wprintw(command_win, "\b \b");
184 } else
185 wprintw(command_win, "%c", key);
186 return key;
187 }
188
189 /*
190 * This function asks the user for a command and calls the dispatcher
191 * function, dispatch, to analyze it. We use the readline library
192 * function readline to read the command, hence all the usual readline
193 * keys are available. The new command is saved both in the
194 * readline's history and in our tiny one-command cache, so that only
195 * the enter key is needed to retype it.
196 */
parser(void)197 void parser (void)
198 {
199 char *ptr,command_line [80];
200 int quit=0;
201
202 #if 0
203 noecho();
204 cbreak();
205 keypad(command_win, 1);
206 wtimeout(command_win, 100);
207
208 rl_getc_function = rl_getc_replacement;
209 #endif
210
211 while (!quit) {
212 /* Terminal screen size has changed */
213 if (redraw_request) {
214 redraw_all();
215 redraw_request=0;
216 }
217
218 wmove (command_win,0,0);
219 wclrtoeol (command_win);
220 wprintw (command_win,"ext2ed > ");
221 refresh_command_win ();
222
223 /*
224 * The ncurses library optimizes cursor movement by
225 * keeping track of the cursor position. However, by
226 * using the readline library I'm breaking its
227 * assumptions. The double -1 arguments tell ncurses
228 * to disable cursor movement optimization this
229 * time.
230 */
231 mvcur (-1,-1,LINES-COMMAND_WIN_LINES,0);
232
233 /* echo (); */
234 ptr=readline ("ext2ed > ");
235 /* noecho (); */
236
237 /*
238 * Readline allocated the buffer - Copy the string
239 * and free the allocated buffer
240 * XXX WHY???
241 */
242 strcpy (command_line,ptr);
243 free (ptr);
244
245 if (*command_line != 0)
246 add_history (command_line);
247
248 /* If only enter was pressed, recall the last command */
249 if (*command_line==0)
250 strcpy (command_line,last_command_line);
251
252 /* Emulate readline's actions for ncurses */
253 mvcur (-1,-1,LINES-COMMAND_WIN_LINES,0);
254 werase (command_win);
255 wprintw (command_win,"ext2ed > ");
256 wprintw (command_win,command_line);
257 wprintw (command_win,"\n");
258 refresh_command_win ();
259
260 /* Save this command in our tiny cache */
261 strcpy (last_command_line,command_line);
262
263 /* And call dispatch to do the actual job */
264 quit=dispatch (command_line);
265 }
266 }
267 #else
read_line(char * foo)268 void read_line(char * foo) {
269 char * chptr = foo;
270 int ch;
271 int done = 0;
272
273 while (!done && (ch = command_read_key())) {
274 switch (ch) {
275 case '\n':
276 done = 1;
277 break;
278
279 case '\b':
280 if (chptr > foo) {
281 wprintw(command_win, "\b \b");
282 chptr--;
283 }
284 break;
285
286 default:
287 if (ch > 256)
288 break;
289 if (ch == '\n') break;
290 *chptr++ = ch;
291 wprintw(command_win, "%c", ch);
292 break;
293 }
294 }
295 *chptr = '\0';
296 }
297
parser(void)298 void parser (void)
299 {
300 char command_line [80];
301 int quit=0;
302
303 noecho();
304 cbreak();
305 wtimeout(command_win, 100);
306 keypad(command_win, 1);
307
308 while (!quit) {
309 /* Terminal screen size has changed */
310 if (redraw_request) {
311 redraw_all();
312 redraw_request=0;
313 }
314
315 wmove (command_win,0,0);wclrtoeol (command_win);
316
317 wmove(command_win, 0, 0);
318 wprintw(command_win, "ext2ed > ");
319 read_line(command_line);
320
321 /* If only enter was pressed, recall the last command */
322 if (*command_line==0)
323 strcpy (command_line,last_command_line);
324
325 mvcur (-1,-1,LINES-COMMAND_WIN_LINES + 1,0);
326
327 strcpy (last_command_line,command_line); /* Save this command in our tiny cache */
328
329 /* And call dispatch to do the actual job */
330 quit=dispatch (command_line);
331 }
332 }
333 #endif
334
335
336 /*
337 * This is a very important function. Its task is to recieve a command
338 * name and link it to a C function. There are three types of commands:
339 *
340 * 1. General commands - Always available and accessed through
341 * general_commands.
342 * 2. Ext2 specific commands - Available when editing an ext2
343 * filesystem, accessed through ext2_commands.
344 * 3. Type specific commands - Those are changing according to the
345 * current type. The global variable current_type points to the
346 * current object definition (of type struct_descriptor). In it, the
347 * struct_commands entry contains the type specific commands links.
348 *
349 * Overriding is an important feature - Much like in C++ : The same
350 * command name can dispatch to different functions. The overriding
351 * priority is 3,2,1; That is - A type specific command will always
352 * override a general command. This is used through the program to
353 * allow fine tuned operation.
354 *
355 * When an handling function is found, it is called along with the
356 * command line that was passed to us. The handling function is then
357 * free to interpert the arguments in its own style.
358 */
dispatch(char * command_line)359 int dispatch (char *command_line)
360 {
361 int i,found=0;
362
363 char command [80];
364
365 parse_word (command_line,command);
366
367 if (strcasecmp (command,"quit")==0) return (1);
368
369 /* 1. Search for type specific commands FIRST - Allows
370 overriding of a general command */
371
372 if (current_type != NULL)
373 for (i=0;
374 i<=current_type->type_commands.last_command && !found;
375 i++) {
376 if (strcasecmp (command,current_type->type_commands.names [i])==0) {
377 (*current_type->type_commands.callback [i]) (command_line);
378 found=1;
379 }
380 }
381
382 /* 2. Now search for ext2 filesystem general commands */
383
384 if (!found)
385 for (i=0;i<=ext2_commands.last_command && !found;i++) {
386 if (strcasecmp (command,ext2_commands.names [i])==0) {
387 (*ext2_commands.callback [i]) (command_line);
388 found=1;
389 }
390 }
391
392
393 /* 3. If not found, search the general commands */
394
395 if (!found)
396 for (i=0;i<=general_commands.last_command && !found;i++) {
397 if (strcasecmp (command,general_commands.names [i])==0) {
398 (*general_commands.callback [i]) (command_line);
399 found=1;
400 }
401 }
402
403 /* 4. If not found, issue an error message and return */
404
405 if (!found) {
406 wprintw (command_win,"Error: Unknown command\n");
407 refresh_command_win ();
408 }
409
410 return (0);
411 }
412
413
414 /*
415 *
416 * This function copies the next word in source to the variable dest,
417 * ignoring whitespaces. It returns a pointer to the next word in
418 * source. It is used to split the command line into command and arguments.
419 */
parse_word(char * source,char * dest)420 char *parse_word (char *source,char *dest)
421 {
422 char ch,*source_ptr,*target_ptr;
423
424 if (*source==0) {
425 *dest=0;
426 return (source);
427 };
428
429 source_ptr=source;target_ptr=dest;
430 do {
431 ch=*source_ptr++;
432 } while (! (ch>' ' && ch<='z') && ch!=0);
433
434 while (ch>' ' && ch<='z') {
435 *target_ptr++=ch;
436 ch=*source_ptr++;
437 }
438
439 *target_ptr=0;
440
441 source_ptr--;
442 do {
443 ch=*source_ptr++;
444 } while (! (ch>' ' && ch<='z') && ch!=0);
445
446 return (--source_ptr);
447 }
448
449 /*
450 * text is the partial command entered by the user; We assume that it
451 * is a part of a command - I didn't write code for smarter completion.
452 *
453 * The state variable is an index which tells us how many possible
454 * completions we already returned to readline.
455 *
456 * We return only one possible completion or (char *) NULL if there
457 * are no more completions. This function will be called by readline
458 * over and over until we tell it to stop.
459 *
460 * While scanning for possible completions, we use the same priority
461 * definition which was used in dispatch.
462 */
463 #if HAVE_READLINE
complete_command(char * text,int state)464 char *complete_command (char *text,int state)
465 {
466 int state_index=-1;
467 int i,len;
468
469 len=strlen (text);
470
471 /* Is the command type specific ? */
472
473 if (current_type != NULL)
474 for (i=0;i<=current_type->type_commands.last_command;i++) {
475 if (strncmp (current_type->type_commands.names [i],text,len)==0) {
476 state_index++;
477 if (state==state_index) {
478 return (dupstr (current_type->type_commands.names [i]));
479 }
480 }
481 }
482
483 /* No, pehaps ext2 specific command then ? */
484
485 for (i=0;i<=ext2_commands.last_command;i++) {
486 if (strncmp (ext2_commands.names [i],text,len)==0) {
487 state_index++;
488 if (state==state_index)
489 return (dupstr (ext2_commands.names [i]));
490 }
491 }
492
493
494 /* Check for a general command */
495
496 for (i=0;i<=general_commands.last_command;i++) {
497 if (strncmp (general_commands.names [i],text,len)==0) {
498 state_index++;
499 if (state==state_index)
500 return (dupstr (general_commands.names [i]));
501 }
502 }
503
504 /* quit is handled differently */
505
506 if (strncmp ("quit",text,len)==0) {
507 state_index++;
508 if (state==state_index)
509 return (dupstr ("quit"));
510 }
511
512 /* No more completions */
513
514 return ((char *) NULL);
515 }
516 #endif
517
518
519 /*
520 * Nothing special - Just allocates enough space and copy the string.
521 */
dupstr(char * src)522 char *dupstr (char *src)
523 {
524 char *ptr;
525
526 ptr=(char *) malloc (strlen (src)+1);
527 strcpy (ptr,src);
528 return (ptr);
529 }
530
531 #ifdef DEBUG
532 /*
533 * This function reports an internal error. It is almost not used. One
534 * place in which I do check for internal errors is disk.c.
535 *
536 * We just report the error, and try to continue ...
537 */
internal_error(char * description,char * source_name,char * function_name)538 void internal_error (char *description,char *source_name,char *function_name)
539 {
540 wprintw (command_win,"Internal error - Found by source: %s.c , function: %s\n",source_name,function_name);
541 wprintw (command_win,"\t%s\n",description);
542 wprintw (command_win,"Press enter to (hopefully) continue\n");
543 refresh_command_win ();getch ();werase (command_win);
544 }
545
546 #endif
547