Lines Matching refs:on
65 write: raw D-channel-messages (format: depends on driver).
66 read: raw D-channel-messages (format: depends on driver).
67 ioctl: depends on driver, i.e. for the ICN-driver, the base-address of
68 the ports and the shared memory on the card can be set and read
95 ATE1 Echo on (default).
126 AT&Lx Set list of phone numbers to listen on. x is a
147 Note on value in Reg 19:
157 AT&X1 BTX-mode on. (S13.1=1, S13.5=0 S14=0, S16=7, S18=7, S19=0)
158 AT&X2 T.70-mode on. (S13.1=1, S13.5=1, S14=0, S16=7, S18=7, S19=0)
175 0 0 Answer on ring number.
195 1 = Echo on.
196 Bit 3 0 = DCD always on.
199 1 = Ignore RTS, CTS always on.
200 Bit 5 0 = return to command mode on DTR low.
204 Bit 6 0 = DSR always on.
205 1 = DSR only on if channel is available.
207 1 = Cisco-PPP-flag-hack on.
212 1 = T.70 protocol (Only for BTX!) on
213 Bit 2: 0 = Don't hangup on DTR low.
214 1 = Hangup on DTR low.
220 1 = T.70 extended protocol on
222 1 = Special RUNG Message on
223 "RUNG" is delivered on a ttyI, if
249 or to be used on dialout:
254 bit. In this case, on incoming calls
267 Set on incoming call (during RING) to
271 Set on incoming call (during RING) to
276 1 = Add CPN to RING message on
278 1 = Add CPN to FCON message on
280 1 = Add CDN to RING/FCON message on
309 The call is placed on the first physical line, which supports the
317 a network interface, the first tty gets a "RING" and so on.
329 Configuration depends on how the drivers are built. See the
330 README.<yourDriver> for information on driver-specific setup.
349 c) If you want to have really permanent "Modem"-settings on disk, you
352 an AT&W0 is performed on any ISDN-tty. If the file already exists,
365 f) Set the number for outgoing calls on the interface:
378 isdnctrl chargehup isdn0 on
392 In this mode, the interface will never make any connections on its
425 "isdnctrl secure <InterfaceName> on"
445 "isdnctrl ihup <InterfaceName> [on|off]"
446 Switch the hang-up-timer for incoming calls on or off.
458 "isdnctrl callback <InterfaceName> [on|off]"
470 "isdnctrl cbhup <InterfaceName> [on|off]"
486 X.25 network protocol stack (AF_X25 sockets) on top of isdn.
528 depends on the card used. At the moment no card supports more than
534 "isdnctrl busreject <DriverId> on|off"
535 If switched on, isdn4linux replies a REJECT to incoming calls, it
540 isdn4linux rejects an incoming call, which belongs to another device on
578 isdnctrl eaz isdn0 1 # listen on 12345671(1tr6) and 987654(euro)
580 isdnctrl eaz isdn1 4 # listen on 12345674(1tr6) only.
582 isdnctrl eaz isdn2 987654 # listen on 987654(euro) only.
589 on your own, send me a mail containing the proposed changes and