Lines Matching refs:flash

7 	tristate "Detect flash chips by Common Flash Interface (CFI) probe"
12 	  AMD and other flash manufactures that provides a universal method
13 	  for probing the capabilities of flash devices. If you wish to
19 	tristate "Detect non-CFI AMD/JEDEC-compatible flash chips"
22 	  This option enables JEDEC-style probing of flash chips which are not
24 	  CFI-targetted flash drivers for any chips which are identified which
36 	  If you need to specify a specific endianness for access to flash
38 	  support for only specific arrangements of flash chips, say 'Y'. This
128 	bool "Support 1-chip flash interleave" if MTD_CFI_GEOMETRY
131 	  If your flash chips are not interleaved - i.e. you only have one
132 	  flash chip addressed by each bus cycle, then say 'Y'.
135 	bool "Support 2-chip flash interleave" if MTD_CFI_GEOMETRY
138 	  If your flash chips are interleaved in pairs - i.e. you have two
139 	  flash chips addressed by each bus cycle, then say 'Y'.
142 	bool "Support 4-chip flash interleave" if MTD_CFI_GEOMETRY
145 	  If your flash chips are interleaved in fours - i.e. you have four
146 	  flash chips addressed by each bus cycle, then say 'Y'.
149 	bool "Support 8-chip flash interleave" if MTD_CFI_GEOMETRY
152 	  If your flash chips are interleaved in eights - i.e. you have eight
153 	  flash chips addressed by each bus cycle, then say 'Y'.
162 	  "Protection Registers" present on some flash chips.
182 	tristate "Support for Intel/Sharp flash chips"
192 	tristate "Support for AMD/Fujitsu/Spansion flash chips"
202 	tristate "Support for ST (Advanced Architecture) flash chips"
240 	  This allows MTD support to work with flash memory which is also