282 		hw_dbg("PHY Address %u is out of range\n", offset);  in igb_read_phy_reg_sgmii_82575()
305 		hw_dbg("I2CCMD Read did not complete\n");  in igb_read_phy_reg_sgmii_82575()
309 		hw_dbg("I2CCMD Error bit set\n");  in igb_read_phy_reg_sgmii_82575()
336 		hw_dbg("PHY Address %d is out of range\n", offset);  in igb_write_phy_reg_sgmii_82575()
363 		hw_dbg("I2CCMD Write did not complete\n");  in igb_write_phy_reg_sgmii_82575()
367 		hw_dbg("I2CCMD Error bit set\n");  in igb_write_phy_reg_sgmii_82575()
407 			hw_dbg("Vendor ID 0x%08X read at address %u\n",  in igb_get_phy_id_82575()
416 			hw_dbg("PHY address %u was unreadable\n", phy->addr);  in igb_get_phy_id_82575()
448 	hw_dbg("Soft resetting SGMII attached PHY...\n");  in igb_phy_hw_reset_sgmii_82575()
616 		hw_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n");  in igb_acquire_swfw_sync_82575()
678 		hw_dbg("MNG configuration cycle has not completed.\n");  in igb_get_cfg_done_82575()
793 	hw_dbg("e1000_init_rx_addrs_82575");  in igb_init_rx_addrs_82575()
796 	hw_dbg("Programming MAC Address into RAR[0]\n");  in igb_init_rx_addrs_82575()
800 	hw_dbg("Clearing RAR[1-%u]\n", rar_count-1);  in igb_init_rx_addrs_82575()
849 	hw_dbg("Clearing MTA\n");  in igb_update_mc_addr_list_82575()
858 		hw_dbg("Hash value = 0x%03X\n", hash_value);  in igb_update_mc_addr_list_82575()
918 		hw_dbg("PCI-E Master disable polling has failed.\n");  in igb_reset_hw_82575()
920 	hw_dbg("Masking off all interrupts\n");  in igb_reset_hw_82575()
931 	hw_dbg("Issuing a global reset to MAC\n");  in igb_reset_hw_82575()
941 		hw_dbg("Auto Read Done did not complete\n");  in igb_reset_hw_82575()
972 		hw_dbg("Error initializing identification LED\n");  in igb_init_hw_82575()
977 	hw_dbg("Initializing the IEEE VLAN\n");  in igb_init_hw_82575()
983 	hw_dbg("Zeroing the MTA\n");  in igb_init_hw_82575()
1053 		hw_dbg("Forcing Speed and Duplex\n");  in igb_setup_copper_link_82575()
1056 			hw_dbg("Error Forcing Speed and Duplex\n");  in igb_setup_copper_link_82575()
1074 		hw_dbg("Valid link established!!!\n");  in igb_setup_copper_link_82575()
1079 		hw_dbg("Unable to establish link!!!\n");  in igb_setup_copper_link_82575()
1135 		hw_dbg("Configuring Autoneg; PCS_LCTL = 0x%08X\n", reg);  in igb_setup_fiber_serdes_link_82575()
1143 		hw_dbg("Configuring Forced Link; PCS_LCTL = 0x%08X\n", reg);  in igb_setup_fiber_serdes_link_82575()
1211 		hw_dbg("Wrote 0x%08X to PCS_LCTL to configure forced link\n",  in igb_configure_pcs_link_82575()
1256 		hw_dbg("Running reset init script for 82575\n");  in igb_reset_init_script_82575()
1395 		hw_dbg("Queue disable timed out after 10ms\n");  in igb_rx_fifo_flush_82575()