298 	[UART_LCR] = 5,
308 	[UART_LCR] = 5,
334 		[UART_LCR]	= 0x1c,
344 		[UART_LCR]	= 0x1c,
449 	if (save_offset == UART_LCR) {  in dwapb_serial_out()
526 		p->serial_in(p, UART_LCR);	/* safe, no side-effects */  in serial_out_sync()
642 			serial_outp(p, UART_LCR, 0xBF);  in serial8250_set_sleep()
644 			serial_outp(p, UART_LCR, 0);  in serial8250_set_sleep()
648 			serial_outp(p, UART_LCR, 0xBF);  in serial8250_set_sleep()
650 			serial_outp(p, UART_LCR, 0);  in serial8250_set_sleep()
734 	old_lcr = serial_inp(up, UART_LCR);  in size_fifo()
735 	serial_outp(up, UART_LCR, 0);  in size_fifo()
741 	serial_outp(up, UART_LCR, UART_LCR_DLAB);  in size_fifo()
744 	serial_outp(up, UART_LCR, 0x03);  in size_fifo()
753 	serial_outp(up, UART_LCR, UART_LCR_DLAB);  in size_fifo()
755 	serial_outp(up, UART_LCR, old_lcr);  in size_fifo()
770 	old_lcr = serial_inp(p, UART_LCR);  in autoconfig_read_divisor_id()
771 	serial_outp(p, UART_LCR, UART_LCR_DLAB);  in autoconfig_read_divisor_id()
783 	serial_outp(p, UART_LCR, old_lcr);  in autoconfig_read_divisor_id()
825 	serial_out(up, UART_LCR, 0xBF);  in autoconfig_has_efr()
827 	serial_out(up, UART_LCR, 0x00);  in autoconfig_has_efr()
934 	serial_outp(up, UART_LCR, UART_LCR_DLAB);  in autoconfig_16550a()
952 	serial_outp(up, UART_LCR, 0xBF);  in autoconfig_16550a()
966 	serial_outp(up, UART_LCR, 0);  in autoconfig_16550a()
968 	serial_outp(up, UART_LCR, 0xE0);  in autoconfig_16550a()
972 		serial_outp(up, UART_LCR, 0);  in autoconfig_16550a()
974 		serial_outp(up, UART_LCR, 0xE0);  in autoconfig_16550a()
976 		serial_outp(up, UART_LCR, 0);  in autoconfig_16550a()
982 			serial_outp(up, UART_LCR, 0xE0);  in autoconfig_16550a()
994 			serial_outp(up, UART_LCR, 0);  in autoconfig_16550a()
1009 	serial_outp(up, UART_LCR, 0);  in autoconfig_16550a()
1013 	serial_outp(up, UART_LCR, UART_LCR_DLAB);  in autoconfig_16550a()
1017 	serial_outp(up, UART_LCR, 0);  in autoconfig_16550a()
1132 	save_lcr = serial_in(up, UART_LCR);  in autoconfig()
1163 	serial_outp(up, UART_LCR, 0xBF);  in autoconfig()
1165 	serial_outp(up, UART_LCR, 0);  in autoconfig()
1210 	serial_outp(up, UART_LCR, save_lcr);  in autoconfig()
1577 			serial_out(up, UART_LCR, up->lcr);  in serial8250_interrupt()
1838 	serial_out(up, UART_LCR, up->lcr);  in serial8250_break_ctl()
1943 		serial_outp(up, UART_LCR, 0xBF);  in serial8250_startup()
1946 		serial_outp(up, UART_LCR, 0);  in serial8250_startup()
1948 		serial_outp(up, UART_LCR, 0xBF);  in serial8250_startup()
1950 		serial_outp(up, UART_LCR, 0);  in serial8250_startup()
1993 		serial_outp(up, UART_LCR, 0xbf);  in serial8250_startup()
2001 		serial_outp(up, UART_LCR, 0);  in serial8250_startup()
2071 	serial_outp(up, UART_LCR, UART_LCR_WLEN8);  in serial8250_startup()
2180 	serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC);  in serial8250_shutdown()
2352 		serial_outp(up, UART_LCR, 0xBF);  in serial8250_set_termios()
2369 		serial_outp(up, UART_LCR, 0xe0);  in serial8250_set_termios()
2371 		serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */  in serial8250_set_termios()
2383 	serial_outp(up, UART_LCR, cval);		/* reset DLAB */  in serial8250_set_termios()
2894 		serial_outp(up, UART_LCR, 0xE0);  in serial8250_resume_port()
2901 		serial_outp(up, UART_LCR, 0);  in serial8250_resume_port()