Lines Matching refs:on
6 depends on HAS_IOMEM
41 bool "Console on 8250/16550 and compatible serial port"
42 depends on SERIAL_8250=y
75 depends on X86
80 depends on SERIAL_8250 && GSC
85 depends on SERIAL_8250 && PCI
94 depends on SERIAL_8250 && PNP
102 depends on SERIAL_8250 && HP300
107 depends on PCMCIA && SERIAL_8250
121 depends on SERIAL_8250
131 depends on SERIAL_8250
142 depends on SERIAL_8250
155 depends on SERIAL_8250_EXTENDED && !IA64
172 depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
181 depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
190 depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
200 depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
211 depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
220 depends on SERIAL_8250_EXTENDED
223 serial ports on the same board to share a single IRQ. To enable
227 bool "Autodetect IRQ on standard ports (unsafe)"
228 depends on SERIAL_8250_EXTENDED
240 depends on SERIAL_8250_EXTENDED
245 tristate "Support 8250-type ports on MCA buses"
246 depends on SERIAL_8250 != n && MCA
255 depends on ARCH_ACORN && SERIAL_8250
263 depends on SERIAL_8250 != n && SOC_AU1X00
267 depending on the SOC. If unsure, say N.
271 depends on SERIAL_8250 != n && SERIAL_RM9000
275 port hardware found on MIPS RM9122 and similar processors.
282 depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
292 bool "Support for console on AMBA serial port"
293 depends on SERIAL_AMBA_PL010=y
309 depends on ARM_AMBA
319 bool "Support for console on AMBA serial port"
320 depends on SERIAL_AMBA_PL011=y
335 tristate "BCM1xxx on-chip DUART serial support"
336 depends on SIBYTE_SB1xxx_SOC=y
343 is implemented. Depending on the SOC configuration there may be
350 bool "Support for console on a BCM1xxx DUART serial port"
351 depends on SERIAL_SB1250_DUART=y
363 bool "AT91 / AT32 on-chip serial port support"
364 depends on (ARM && ARCH_AT91) || AVR32
367 This enables the driver for the on-chip UARTs of the Atmel
371 bool "Support for console on AT91 / AT32 serial port"
372 depends on SERIAL_ATMEL=y
375 Say Y here if you wish to use an on-chip UART on a Atmel
381 bool "Support DMA transfers on AT91 / AT32 serial port"
382 depends on SERIAL_ATMEL
397 depends on SERIAL_ATMEL=y
414 depends on ARCH_KS8695
420 bool "Support for console on KS8695 (Centaur) serial port"
421 depends on SERIAL_KS8695=y
431 depends on ARM && ARCH_CLPS711X
437 bool "Support for console on CLPS711X serial port"
438 depends on SERIAL_CLPS711X=y
450 depends on ARM && PLAT_S3C
453 Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
455 provide all of these ports, depending on how the serial port
460 depends on ARM && PLAT_S3C
470 depends on SERIAL_SAMSUNG && DEBUG_LL
478 bool "Support for console on Samsung SoC serial port"
479 depends on SERIAL_SAMSUNG=y
482 Allow selection of the S3C24XX on-board serial ports for use as
494 depends on ARM && SERIAL_SAMSUNG && CPU_S3C2400
501 depends on SERIAL_SAMSUNG && CPU_S3C2410
508 depends on SERIAL_SAMSUNG && CPU_S3C2412
515 depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442)
523 depends on SERIAL_SAMSUNG && CPU_S3C24A0
530 depends on SERIAL_SAMSUNG && (CPU_S3C600 || CPU_S3C6410)
538 depends on MACH_DECSTATION && 32BIT
546 bool "Support console on DECstation DZ serial driver"
547 depends on SERIAL_DZ=y
556 Note that the firmware uses ttyS3 as the serial console on
563 depends on MACH_DECSTATION
576 bool "Support for console on a DECstation Z85C30 serial port"
577 depends on SERIAL_ZS=y
586 Note that the firmware uses ttyS1 as the serial console on the
587 Maxine and ttyS3 on the others using this driver.
593 depends on ARM && FOOTBRIDGE
596 If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
601 bool "Console on DC21285 serial port"
602 depends on SERIAL_21285=y
605 If you have enabled the serial port on the 21285 footbridge you can
617 depends on PPC32 && MV64X60
623 bool "Support for console on Marvell MPSC serial port"
624 depends on SERIAL_MPSC
627 Say Y here if you want to support a serial console on a Marvell MPSC.
631 depends on ARM && ARCH_PXA
634 If you have a machine based on an Intel XScale PXA2xx CPU you
638 bool "Console on PXA serial port"
639 depends on SERIAL_PXA
642 If you have enabled the serial port on the Intel XScale PXA
654 depends on ARM && ARCH_SA1100
657 If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
663 bool "Console on SA1100 serial port"
664 depends on SERIAL_SA1100
667 If you have enabled the serial port on the SA1100/SA1110 StrongARM
679 depends on BLACKFIN
683 Add support for the built-in UARTs on the Blackfin.
689 bool "Console on Blackfin serial port"
690 depends on SERIAL_BFIN=y
695 depends on SERIAL_BFIN
703 depends on !DMA_UNCACHED_NONE && !KGDB_UART
717 depends on SERIAL_BFIN
723 depends on SERIAL_BFIN_UART0
730 depends on BFIN_UART0_CTSRTS
738 depends on BFIN_UART0_CTSRTS
746 depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561)
752 depends on SERIAL_BFIN_UART1
759 depends on BFIN_UART1_CTSRTS && !BF54x
766 depends on BFIN_UART1_CTSRTS && !BF54x
773 depends on SERIAL_BFIN && (BF54x)
779 depends on SERIAL_BFIN_UART2
786 depends on BFIN_UART2_CTSRTS
793 depends on BFIN_UART2_CTSRTS
800 depends on SERIAL_BFIN && (BF54x)
806 depends on SERIAL_BFIN_UART3
813 depends on ARM && (ARCH_IMX || ARCH_MXC)
816 If you have a machine based on a Motorola IMX CPU you
820 bool "Console on IMX serial port"
821 depends on SERIAL_IMX
824 If you have enabled the serial port on the Motorola IMX
836 depends on PPC32
845 bool "Support for console on Xilinx uartlite serial port"
846 depends on SERIAL_UARTLITE=y
855 depends on SPARC
862 depends on SPARC
864 This driver supports the Zilog8530 serial ports found on many Sparc
868 bool "Console on Sun Zilog8530 serial port"
869 depends on SERIAL_SUNZILOG=y
872 on your Sparc system as the console, you can do so by answering
877 depends on SPARC && PCI
880 mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able
884 bool "Console on Sun SU serial port"
885 depends on SERIAL_SUNSU=y
888 on your Sparc system as the console, you can do so by answering
893 depends on GSC
905 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
906 3. Add device ttyB0 to /etc/securetty (if you want to log on as
907 root on this console.)
911 bool "Support for console on serial MUX"
912 depends on SERIAL_MUX=y
918 depends on PARISC && !SERIAL_MUX && VT
927 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
928 3. Add device ttyB0 to /etc/securetty (if you want to log on as
929 root on this console.)
934 depends on SPARC && PCI
936 This driver supports the Siemens SAB82532 DUSCC serial ports on newer
941 bool "Console on Sun Siemens SAB82532 serial port"
942 depends on SERIAL_SUNSAB=y
945 on your Sparc system as the console, you can do so by answering
950 depends on SPARC64
952 This driver supports the console device found on SUN4V Sparc
957 depends on SGI_HAS_ZILOG
960 This driver supports the Zilog8530 serial ports found on SGI
964 bool "Console on SGI Zilog8530 serial port"
965 depends on SERIAL_IP22_ZILOG=y
970 depends on SUPERH || H8300
975 depends on SERIAL_SH_SCI
979 bool "Support for console on SuperH SCI(F)"
980 depends on SERIAL_SH_SCI=y
985 depends on MIPS && (SOC_PNX8550 || SOC_PNX833X)
993 depends on SERIAL_PNX8XXX
1010 depends on M68328 || M68EZ328 || M68VZ328
1016 bool "Support RTS/CTS on 68328 serial port"
1017 depends on SERIAL_68328
1021 depends on COLDFIRE
1028 depends on SERIAL_MCF
1037 depends on SERIAL_MCF
1044 depends on M68360
1050 depends on M68360
1056 depends on SERIAL_68360_SMC || SERIAL_68360_SCC
1061 depends on PPC_OF && PPC_PMAC
1064 This driver supports the Zilog z85C30 serial ports found on
1070 depends on SERIAL_PMACZILOG
1072 The pmac_zilog driver for the z85C30 chip on many powermacs
1082 access the built-in serial ports on powermacs will need to
1090 Say N unless you need the z85c30 ports on your powermac
1094 bool "Console on PowerMac z85c30 serial port"
1095 depends on SERIAL_PMACZILOG=y
1099 on your PowerMac as the console, you can do so by answering
1104 depends on ARM && ARCH_LH7A40X
1107 This enables support for the three on-board UARTs of the
1111 bool "Support for console on Sharp LH7A40X serial port"
1112 depends on SERIAL_LH7A40X=y
1127 depends on CPM2 || 8xx
1130 This driver supports the SCC and SMC serial ports on Motorola
1134 bool "Support for console on CPM SCC/SMC serial port"
1135 depends on SERIAL_CPM=y
1151 depends on IA64_GENERIC || IA64_SGI_SN2
1161 depends on PPC_MPC52xx || PPC_MPC512x
1170 bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port"
1171 depends on SERIAL_MPC52xx=y
1179 depends on SERIAL_MPC52xx_CONSOLE=y
1188 depends on PCI && (PPC_ISERIES || PPC_PSERIES)
1201 depends on M32R
1209 depends on SERIAL_M32R_SIO=y
1218 bool "M32R SIO I/F on a PLD"
1219 depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PLAT_USRV || PLAT_M32700UT)
1223 on a PLD (Programmable Logic Device).
1230 depends on HAS_TXX9_SERIAL
1239 depends on SERIAL_TXX9
1244 depends on SERIAL_TXX9=y
1249 depends on !SERIAL_8250 && SERIAL_TXX9
1253 depends on CPU_VR41XX
1262 depends on SERIAL_VR41XX=y
1266 a console on a serial port, say Y. Otherwise, say N.
1270 depends on PCI
1286 depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4
1290 and wish to use the serial ports on this card, say Y.
1295 depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC3
1303 depends on ARM && ARCH_NETX
1306 If you have a machine based on a Hilscher NetX SoC you
1313 bool "Console on NetX serial port"
1314 depends on SERIAL_NETX=y
1317 If you have enabled the serial port on the Hilscher NetX SoC
1321 tristate "Serial port on Open Firmware platform bus"
1322 depends on PPC_OF
1323 depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL
1326 on a platform specific bus, you should enable this option.
1332 depends on PPC_OF && PPC_DCR
1341 bool "Console on NWP serial port"
1342 depends on SERIAL_OF_PLATFORM_NWPSERIAL=y
1345 Support for Console on the NWP serial ports.
1349 depends on QUICC_ENGINE
1354 This driver supports the QE serial ports on Freescale embedded
1359 depends on SNI_RM
1366 bool "Console on SC2681/SC2692 serial port"
1367 depends on SERIAL_SC26XX
1370 Support for Console on SC2681/SC2692 serial ports.
1374 depends on BLACKFIN && EXPERIMENTAL
1377 Enble support SPORT emulate UART on Blackfin series.
1384 depends on SERIAL_BFIN_SPORT
1408 depends on SERIAL_BFIN_SPORT