Lines Matching refs:USB
2 # USB Gadget support on a system involves
13 # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
17 tristate "USB Gadget Support"
19 USB is a master/slave protocol, organized with one master
21 The USB hardware is asymmetric, which makes it easier to set up:
33 a USB peripheral device. Configure one hardware driver for your
87 Some devices need to draw power from USB when they are
92 Enter the maximum power your device draws through USB, in
103 # USB Peripheral Controller Support
113 prompt "USB Peripheral Controller"
116 A USB device uses a controller to talk to its host.
126 boolean "Atmel AT91 USB Device Port"
131 full speed USB Device Port with support for five configurable
148 USBA is the integrated high-speed USB Device controller on
158 boolean "Freescale Highspeed USB DR Peripheral Controller"
163 Dual-Role(DR) USB controller, which supports device mode.
182 This driver provides USB Device Controller driver for LH7A40x
191 boolean "OMAP USB Device Controller"
197 speed USB device controllers, with support for up to 30
216 The most notable feature of USB OTG is support for a
228 an integrated full speed USB 1.1 device controller. The
259 an integrated full speed USB 1.1 device controller.
275 boolean "S3C2410 USB Device Controller"
279 full speed USB 1.1 device controller. It has 4 configurable
301 boolean "Inventra HDRC USB Peripheral (TI, ADI, ...)"
310 boolean "Freescale IMX USB Peripheral Controller"
314 USB 1.1 device controller. The controller in the IMX series
331 boolean "Renesas M66592 USB Peripheral Controller"
334 M66592 is a discrete USB peripheral controller chip that
335 supports both full and high speed USB 2.0 data transfers.
349 boolean "Enable SuperH built-in USB like the M66592"
352 SH7722 has USB like the M66592.
368 It is a USB Highspeed DMA capable USB device controller. Beside ep0
384 boolean "Freescale QE/CPM USB Device Controller"
388 QE/CPM2 USB controller, which support device mode with 4
403 boolean "MIPS USB CI13xxx"
407 MIPS USB IP core family device controller
425 NetChip 2280 / 2282 is a PCI based USB peripheral controller which
426 supports both full and high speed USB 2.0 data transfers.
447 for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI).
469 depends on USB=y || (USB=m && USB_GADGET=m)
472 This host controller driver emulates USB, looping all data transfer
473 requests back to a USB "gadget driver" in the same host. The host
483 side Linux-USB device driver, this may help to debug both sides
484 of a USB protocol stack.
510 # USB Gadget Drivers
513 tristate "USB Gadget Drivers"
517 A Linux "Gadget Driver" talks to the USB Peripheral Controller
520 are a subset (implementing a USB device class specification).
521 A gadget driver implements one or more USB functions using
543 USB "gadget drivers" can be written.
546 USB peripheral controller driver. Then you can use host-side
563 identifiers of the USB-OTG test device. That means that when
566 one serve as the USB host instead (in the "B-Host" role).
581 is used, placing fewer demands on USB.
585 Within the USB device, this gadget driver exposes a network device
589 The Linux-USB host-side "usbnet" driver interoperates with this
609 Microsoft USB hosts.
621 programs implement a single-configuration USB device, including
636 The File-backed Storage Gadget acts as a USB Mass Storage
651 behavior of USB Mass Storage hosts. Not needed for
657 The Serial Gadget talks to the Linux-USB generic serial driver.
659 to interoperate with MS-Windows hosts or with the Linux-USB
678 The MIDI Gadget acts as a USB Audio device, with one MIDI
690 The Printer Gadget channels data between the USB host and a