1 /** 2 * This file contains definitions of WLAN commands. 3 */ 4 5 #ifndef _LBS_HOST_H_ 6 #define _LBS_HOST_H_ 7 8 /** PUBLIC DEFINITIONS */ 9 #define DEFAULT_AD_HOC_CHANNEL 6 10 #define DEFAULT_AD_HOC_CHANNEL_A 36 11 12 #define CMD_OPTION_WAITFORRSP 0x0002 13 14 /** Host command IDs */ 15 16 /* Return command are almost always the same as the host command, but with 17 * bit 15 set high. There are a few exceptions, though... 18 */ 19 #define CMD_RET(cmd) (0x8000 | cmd) 20 21 /* Return command convention exceptions: */ 22 #define CMD_RET_802_11_ASSOCIATE 0x8012 23 24 /* Command codes */ 25 #define CMD_GET_HW_SPEC 0x0003 26 #define CMD_EEPROM_UPDATE 0x0004 27 #define CMD_802_11_RESET 0x0005 28 #define CMD_802_11_SCAN 0x0006 29 #define CMD_802_11_GET_LOG 0x000b 30 #define CMD_MAC_MULTICAST_ADR 0x0010 31 #define CMD_802_11_AUTHENTICATE 0x0011 32 #define CMD_802_11_EEPROM_ACCESS 0x0059 33 #define CMD_802_11_ASSOCIATE 0x0050 34 #define CMD_802_11_SET_WEP 0x0013 35 #define CMD_802_11_GET_STAT 0x0014 36 #define CMD_802_3_GET_STAT 0x0015 37 #define CMD_802_11_SNMP_MIB 0x0016 38 #define CMD_MAC_REG_MAP 0x0017 39 #define CMD_BBP_REG_MAP 0x0018 40 #define CMD_MAC_REG_ACCESS 0x0019 41 #define CMD_BBP_REG_ACCESS 0x001a 42 #define CMD_RF_REG_ACCESS 0x001b 43 #define CMD_802_11_RADIO_CONTROL 0x001c 44 #define CMD_802_11_RF_CHANNEL 0x001d 45 #define CMD_802_11_RF_TX_POWER 0x001e 46 #define CMD_802_11_RSSI 0x001f 47 #define CMD_802_11_RF_ANTENNA 0x0020 48 #define CMD_802_11_PS_MODE 0x0021 49 #define CMD_802_11_DATA_RATE 0x0022 50 #define CMD_RF_REG_MAP 0x0023 51 #define CMD_802_11_DEAUTHENTICATE 0x0024 52 #define CMD_802_11_REASSOCIATE 0x0025 53 #define CMD_MAC_CONTROL 0x0028 54 #define CMD_802_11_AD_HOC_START 0x002b 55 #define CMD_802_11_AD_HOC_JOIN 0x002c 56 #define CMD_802_11_QUERY_TKIP_REPLY_CNTRS 0x002e 57 #define CMD_802_11_ENABLE_RSN 0x002f 58 #define CMD_802_11_SET_AFC 0x003c 59 #define CMD_802_11_GET_AFC 0x003d 60 #define CMD_802_11_AD_HOC_STOP 0x0040 61 #define CMD_802_11_HOST_SLEEP_CFG 0x0043 62 #define CMD_802_11_WAKEUP_CONFIRM 0x0044 63 #define CMD_802_11_HOST_SLEEP_ACTIVATE 0x0045 64 #define CMD_802_11_BEACON_STOP 0x0049 65 #define CMD_802_11_MAC_ADDRESS 0x004d 66 #define CMD_802_11_LED_GPIO_CTRL 0x004e 67 #define CMD_802_11_EEPROM_ACCESS 0x0059 68 #define CMD_802_11_BAND_CONFIG 0x0058 69 #define CMD_802_11D_DOMAIN_INFO 0x005b 70 #define CMD_802_11_KEY_MATERIAL 0x005e 71 #define CMD_802_11_SLEEP_PARAMS 0x0066 72 #define CMD_802_11_INACTIVITY_TIMEOUT 0x0067 73 #define CMD_802_11_SLEEP_PERIOD 0x0068 74 #define CMD_802_11_TPC_CFG 0x0072 75 #define CMD_802_11_PA_CFG 0x0073 76 #define CMD_802_11_FW_WAKE_METHOD 0x0074 77 #define CMD_802_11_SUBSCRIBE_EVENT 0x0075 78 #define CMD_802_11_RATE_ADAPT_RATESET 0x0076 79 #define CMD_802_11_TX_RATE_QUERY 0x007f 80 #define CMD_GET_TSF 0x0080 81 #define CMD_BT_ACCESS 0x0087 82 #define CMD_FWT_ACCESS 0x0095 83 #define CMD_802_11_MONITOR_MODE 0x0098 84 #define CMD_MESH_ACCESS 0x009b 85 #define CMD_MESH_CONFIG 0x00a3 86 #define CMD_SET_BOOT2_VER 0x00a5 87 #define CMD_802_11_BEACON_CTRL 0x00b0 88 89 /* For the IEEE Power Save */ 90 #define CMD_SUBCMD_ENTER_PS 0x0030 91 #define CMD_SUBCMD_EXIT_PS 0x0031 92 #define CMD_SUBCMD_SLEEP_CONFIRMED 0x0034 93 #define CMD_SUBCMD_FULL_POWERDOWN 0x0035 94 #define CMD_SUBCMD_FULL_POWERUP 0x0036 95 96 #define CMD_ENABLE_RSN 0x0001 97 #define CMD_DISABLE_RSN 0x0000 98 99 #define CMD_ACT_GET 0x0000 100 #define CMD_ACT_SET 0x0001 101 #define CMD_ACT_GET_AES 0x0002 102 #define CMD_ACT_SET_AES 0x0003 103 #define CMD_ACT_REMOVE_AES 0x0004 104 105 /* Define action or option for CMD_802_11_SET_WEP */ 106 #define CMD_ACT_ADD 0x0002 107 #define CMD_ACT_REMOVE 0x0004 108 #define CMD_ACT_USE_DEFAULT 0x0008 109 110 #define CMD_TYPE_WEP_40_BIT 0x01 111 #define CMD_TYPE_WEP_104_BIT 0x02 112 113 #define CMD_NUM_OF_WEP_KEYS 4 114 115 #define CMD_WEP_KEY_INDEX_MASK 0x3fff 116 117 /* Define action or option for CMD_802_11_RESET */ 118 #define CMD_ACT_HALT 0x0003 119 120 /* Define action or option for CMD_802_11_SCAN */ 121 #define CMD_BSS_TYPE_BSS 0x0001 122 #define CMD_BSS_TYPE_IBSS 0x0002 123 #define CMD_BSS_TYPE_ANY 0x0003 124 125 /* Define action or option for CMD_802_11_SCAN */ 126 #define CMD_SCAN_TYPE_ACTIVE 0x0000 127 #define CMD_SCAN_TYPE_PASSIVE 0x0001 128 129 #define CMD_SCAN_RADIO_TYPE_BG 0 130 131 #define CMD_SCAN_PROBE_DELAY_TIME 0 132 133 /* Define action or option for CMD_MAC_CONTROL */ 134 #define CMD_ACT_MAC_RX_ON 0x0001 135 #define CMD_ACT_MAC_TX_ON 0x0002 136 #define CMD_ACT_MAC_LOOPBACK_ON 0x0004 137 #define CMD_ACT_MAC_WEP_ENABLE 0x0008 138 #define CMD_ACT_MAC_INT_ENABLE 0x0010 139 #define CMD_ACT_MAC_MULTICAST_ENABLE 0x0020 140 #define CMD_ACT_MAC_BROADCAST_ENABLE 0x0040 141 #define CMD_ACT_MAC_PROMISCUOUS_ENABLE 0x0080 142 #define CMD_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100 143 #define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE 0x0400 144 145 /* Event flags for CMD_802_11_SUBSCRIBE_EVENT */ 146 #define CMD_SUBSCRIBE_RSSI_LOW 0x0001 147 #define CMD_SUBSCRIBE_SNR_LOW 0x0002 148 #define CMD_SUBSCRIBE_FAILCOUNT 0x0004 149 #define CMD_SUBSCRIBE_BCNMISS 0x0008 150 #define CMD_SUBSCRIBE_RSSI_HIGH 0x0010 151 #define CMD_SUBSCRIBE_SNR_HIGH 0x0020 152 153 #define RADIO_PREAMBLE_LONG 0x00 154 #define RADIO_PREAMBLE_SHORT 0x02 155 #define RADIO_PREAMBLE_AUTO 0x04 156 157 /* Define action or option for CMD_802_11_RF_CHANNEL */ 158 #define CMD_OPT_802_11_RF_CHANNEL_GET 0x00 159 #define CMD_OPT_802_11_RF_CHANNEL_SET 0x01 160 161 /* Define action or option for CMD_802_11_DATA_RATE */ 162 #define CMD_ACT_SET_TX_AUTO 0x0000 163 #define CMD_ACT_SET_TX_FIX_RATE 0x0001 164 #define CMD_ACT_GET_TX_RATE 0x0002 165 166 #define CMD_ACT_SET_RX 0x0001 167 #define CMD_ACT_SET_TX 0x0002 168 #define CMD_ACT_SET_BOTH 0x0003 169 #define CMD_ACT_GET_RX 0x0004 170 #define CMD_ACT_GET_TX 0x0008 171 #define CMD_ACT_GET_BOTH 0x000c 172 173 /* Define action or option for CMD_802_11_PS_MODE */ 174 #define CMD_TYPE_CAM 0x0000 175 #define CMD_TYPE_MAX_PSP 0x0001 176 #define CMD_TYPE_FAST_PSP 0x0002 177 178 /* Options for CMD_802_11_FW_WAKE_METHOD */ 179 #define CMD_WAKE_METHOD_UNCHANGED 0x0000 180 #define CMD_WAKE_METHOD_COMMAND_INT 0x0001 181 #define CMD_WAKE_METHOD_GPIO 0x0002 182 183 /* Object IDs for CMD_802_11_SNMP_MIB */ 184 #define SNMP_MIB_OID_BSS_TYPE 0x0000 185 #define SNMP_MIB_OID_OP_RATE_SET 0x0001 186 #define SNMP_MIB_OID_BEACON_PERIOD 0x0002 /* Reserved on v9+ */ 187 #define SNMP_MIB_OID_DTIM_PERIOD 0x0003 /* Reserved on v9+ */ 188 #define SNMP_MIB_OID_ASSOC_TIMEOUT 0x0004 /* Reserved on v9+ */ 189 #define SNMP_MIB_OID_RTS_THRESHOLD 0x0005 190 #define SNMP_MIB_OID_SHORT_RETRY_LIMIT 0x0006 191 #define SNMP_MIB_OID_LONG_RETRY_LIMIT 0x0007 192 #define SNMP_MIB_OID_FRAG_THRESHOLD 0x0008 193 #define SNMP_MIB_OID_11D_ENABLE 0x0009 194 #define SNMP_MIB_OID_11H_ENABLE 0x000A 195 196 /* Define action or option for CMD_BT_ACCESS */ 197 enum cmd_bt_access_opts { 198 /* The bt commands start at 5 instead of 1 because the old dft commands 199 * are mapped to 1-4. These old commands are no longer maintained and 200 * should not be called. 201 */ 202 CMD_ACT_BT_ACCESS_ADD = 5, 203 CMD_ACT_BT_ACCESS_DEL, 204 CMD_ACT_BT_ACCESS_LIST, 205 CMD_ACT_BT_ACCESS_RESET, 206 CMD_ACT_BT_ACCESS_SET_INVERT, 207 CMD_ACT_BT_ACCESS_GET_INVERT 208 }; 209 210 /* Define action or option for CMD_FWT_ACCESS */ 211 enum cmd_fwt_access_opts { 212 CMD_ACT_FWT_ACCESS_ADD = 1, 213 CMD_ACT_FWT_ACCESS_DEL, 214 CMD_ACT_FWT_ACCESS_LOOKUP, 215 CMD_ACT_FWT_ACCESS_LIST, 216 CMD_ACT_FWT_ACCESS_LIST_ROUTE, 217 CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR, 218 CMD_ACT_FWT_ACCESS_RESET, 219 CMD_ACT_FWT_ACCESS_CLEANUP, 220 CMD_ACT_FWT_ACCESS_TIME, 221 }; 222 223 /* Define action or option for CMD_802_11_HOST_SLEEP_CFG */ 224 enum cmd_wol_cfg_opts { 225 CMD_ACT_ACTION_NONE = 0, 226 CMD_ACT_SET_WOL_RULE, 227 CMD_ACT_GET_WOL_RULE, 228 CMD_ACT_RESET_WOL_RULE, 229 }; 230 231 /* Define action or option for CMD_MESH_ACCESS */ 232 enum cmd_mesh_access_opts { 233 CMD_ACT_MESH_GET_TTL = 1, 234 CMD_ACT_MESH_SET_TTL, 235 CMD_ACT_MESH_GET_STATS, 236 CMD_ACT_MESH_GET_ANYCAST, 237 CMD_ACT_MESH_SET_ANYCAST, 238 CMD_ACT_MESH_SET_LINK_COSTS, 239 CMD_ACT_MESH_GET_LINK_COSTS, 240 CMD_ACT_MESH_SET_BCAST_RATE, 241 CMD_ACT_MESH_GET_BCAST_RATE, 242 CMD_ACT_MESH_SET_RREQ_DELAY, 243 CMD_ACT_MESH_GET_RREQ_DELAY, 244 CMD_ACT_MESH_SET_ROUTE_EXP, 245 CMD_ACT_MESH_GET_ROUTE_EXP, 246 CMD_ACT_MESH_SET_AUTOSTART_ENABLED, 247 CMD_ACT_MESH_GET_AUTOSTART_ENABLED, 248 CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT = 17, 249 }; 250 251 /* Define actions and types for CMD_MESH_CONFIG */ 252 enum cmd_mesh_config_actions { 253 CMD_ACT_MESH_CONFIG_STOP = 0, 254 CMD_ACT_MESH_CONFIG_START, 255 CMD_ACT_MESH_CONFIG_SET, 256 CMD_ACT_MESH_CONFIG_GET, 257 }; 258 259 enum cmd_mesh_config_types { 260 CMD_TYPE_MESH_SET_BOOTFLAG = 1, 261 CMD_TYPE_MESH_SET_BOOTTIME, 262 CMD_TYPE_MESH_SET_DEF_CHANNEL, 263 CMD_TYPE_MESH_SET_MESH_IE, 264 CMD_TYPE_MESH_GET_DEFAULTS, 265 CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */ 266 }; 267 268 /** Card Event definition */ 269 #define MACREG_INT_CODE_TX_PPA_FREE 0 270 #define MACREG_INT_CODE_TX_DMA_DONE 1 271 #define MACREG_INT_CODE_LINK_LOST_W_SCAN 2 272 #define MACREG_INT_CODE_LINK_LOST_NO_SCAN 3 273 #define MACREG_INT_CODE_LINK_SENSED 4 274 #define MACREG_INT_CODE_CMD_FINISHED 5 275 #define MACREG_INT_CODE_MIB_CHANGED 6 276 #define MACREG_INT_CODE_INIT_DONE 7 277 #define MACREG_INT_CODE_DEAUTHENTICATED 8 278 #define MACREG_INT_CODE_DISASSOCIATED 9 279 #define MACREG_INT_CODE_PS_AWAKE 10 280 #define MACREG_INT_CODE_PS_SLEEP 11 281 #define MACREG_INT_CODE_MIC_ERR_MULTICAST 13 282 #define MACREG_INT_CODE_MIC_ERR_UNICAST 14 283 #define MACREG_INT_CODE_WM_AWAKE 15 284 #define MACREG_INT_CODE_DEEP_SLEEP_AWAKE 16 285 #define MACREG_INT_CODE_ADHOC_BCN_LOST 17 286 #define MACREG_INT_CODE_HOST_AWAKE 18 287 #define MACREG_INT_CODE_STOP_TX 19 288 #define MACREG_INT_CODE_START_TX 20 289 #define MACREG_INT_CODE_CHANNEL_SWITCH 21 290 #define MACREG_INT_CODE_MEASUREMENT_RDY 22 291 #define MACREG_INT_CODE_WMM_CHANGE 23 292 #define MACREG_INT_CODE_BG_SCAN_REPORT 24 293 #define MACREG_INT_CODE_RSSI_LOW 25 294 #define MACREG_INT_CODE_SNR_LOW 26 295 #define MACREG_INT_CODE_MAX_FAIL 27 296 #define MACREG_INT_CODE_RSSI_HIGH 28 297 #define MACREG_INT_CODE_SNR_HIGH 29 298 #define MACREG_INT_CODE_MESH_AUTO_STARTED 35 299 #define MACREG_INT_CODE_FIRMWARE_READY 48 300 301 #endif 302